Chiral Thin Films Research Articles

Chiral Thin Film Structures Based on Arrays of Cobalt Nanohelices Obtained By Oblique Deposition

Chiral Thin Film Structures Based on Arrays of Cobalt Nanohelices Obtained By Oblique Deposition

Self‐Standing Chiral Covalent Organic Framework Thin Films with Full‐Color Tunable Guest‐Induced Circularly Polarized Luminescence

Exploring self‐standing chiral covalent organic framework (CCOF) thin films with controllable circularly polarized luminescence (CPL) is of paramount significance but remains challenging. Herein, we demonstrate the first example of self‐standing CCOF films employing a polymerization‐dispersion‐filtration strategy. Pristine, low‐quality CCOF films were produced by interfacial polymerization and then re‐dispersed into COF colloidal solutions. Via vacuum assisted assembly, these COF colloids were densely stacked and assembled into self‐standing, pure chiral COF films (L‐/D‐CCOF‐F) that were transparent, smooth, crack‐free and highly crystalline. These films were tunable in thicknesses, areas, and roughness, along with strong diffuse reflectance circular dichroism (DRCD) and cyan CPL signals, showing an intrinsic luminescence asymmetric factor (glum) of 4.3×10‐3. Furthermore, these COF films served as host adsorbents to load various achiral organic dye guests through adsorption. The effective chiral transfer and energy transfer between CCOF‐F and achiral fluorescent dyes endowed the dyes with strong chirality and tunable DRCD, resulting in intense, full‐color‐tunable solid‐state CPL. Notably, the ordered arrangement of dye guest molecules within the preferentially oriented chiral pores of CCOF‐F contributed to an amplified |glum| factor of 7.2×10‐2, which is state‐of‐the‐art for COF‐based CPL materials. This work provides new insights into the design and fabrication of self‐standing chiral COF films.

Chiral Liquid Crystalline Metal-Organic Framework Thin Films for Highly Circularly Polarized Luminescence.

Combining metal-organic frameworks (MOFs) with liquid crystals to construct liquid crystalline MOFs (LCMOF) offers the advantage of endowing and enhancing their functionality, yet it remains a challenging task. Herein, we report chiral liquid crystalline MOF (CLCMOF) thin films by cross-linking the chiral liquid crystals (CLC) with MOF thin films to realize highly circular polarization luminescence (CPL) performance with photo and thermal switching. By layer by layer cross-linking stilbene-containing CLC with stilbene-based MOF (CLC/MOF) thin film, the CLCMOF thin films were successfully obtained after UV irradiation due to the abundant [2 + 2] photocycloaddition. The resulted CLCMOF thin films have strong chirality, obvious photochromic fluorescent, and strong CPL performance (the asymmetry factor reaches to 0.4). Furthermore, due to the photochromic fluorescent MOF and thermotropic CLC, the CPL can be reversed and red-shifted after heating and UV irradiation treatment, showing photo- and thermal CPL switching. Such MOF-based CPL thin films with photo/thermal CPL switching were prepared to patterns and codes for the demonstration of potential application in advanced information anticounterfeit and encryption. This study not only opens a strategy for developing chiral thin films combining MOFs and liquid crystals but also offers a new route to achieve CPL switching in optical applications.

Efficient Green Spin Light-Emitting Diodes Enabled by Ultrafast Energy- and Spin-Funneling in Chiral Perovskites.

Introducing molecular chirality into perovskite crystal structures has enabled the control of carrier spin states, giving rise to circularly polarized luminescence (CPL) in thin films and circularly polarized electroluminescence (CPEL) in LEDs. Spin-LEDs can be fabricated either through a spin-filtering layer enabled by chiral-induced spin selectivity or a chiral emissive layer. The former requires a high degree of spin polarization and a compatible spinterface for efficient spin injection, which might not be easily integrated into LEDs. Alternatively, a chiral emissive layer can also generate circularly polarized electroluminescence, but the efficiency remains low and the fundamental mechanism is elusive. In this work, we report an efficient green LED based on quasi-two-dimensional (quasi-2D) chiral perovskites as the emitting layer (EML), where CPEL is directly produced without separate carrier spin injection. The optimized chiral perovskite thin films exhibited strong CPL at 535 nm with a photoluminescence quantum yield (PLQY) of 91% and a photoluminescence dissymmetry factor (glum) of 8.6 × 10-2. Efficient green spin-LEDs were successfully demonstrated, with a large EL dissymmetry factor (gEL) of 7.8 × 10-2 and a maximum external quantum efficiency (EQE) of 13.5% at room temperature. Ultrafast transient absorption (TA) spectroscopic study shows that the CPEL is generated from a rapid energy transfer accompanied by spin transfer from 2D to 3D perovskites. Our study not only demonstrates a reliable approach to achieve high performance spin-LEDs but also reveals the fundamental mechanism of CPEL with an emissive layer of chiral perovskites.

Non-Linear Optical Activity of Chiral Bipyrimidine-Based Thin Films.

An original series of bipyrimidine-based chromophores featuring alkoxystyryl donor groups bearing short chiral (S)-2-methylbutyl chains in positions 4, 3,4 and 3,5, connected to electron-accepting 2,2-bipyrimidine rings, has been developed. Their linear and non-linear optical properties were studied using a variety of techniques, including one- and two-photon absorption spectroscopy, fluorescence measurements, as well as Hyper-Rayleigh scattering to determine the first hyperpolarizabilities. Their electronic and geometrical properties were rationalized by TD-DFT calculations. The thermal properties of the compounds were also investigated by a combination of polarized light optical microscopy, differential scanning calorimetry measurements and small-angle X-ray scattering experiments. The derivatives were found not to have mesomorphic properties, but to exhibit melting temperatures or cold crystallization behavior that enabled the isolation of well-organized thin films. The nonlinear optical properties of amorphous or crystalline thin films were studied by wide-field second harmonic generation and multiphoton fluorescence imaging, confirming that non-centrosymmetric crystal organization enables strong second and third harmonic generation. This new series confirms that our strategy of functionalizing 3D organic octupoles with short chiral chains to generate non-centrosymmetric organized thin films enables the development of highly second order nonlinear optical active materials without the use of corona-poling or tedious deposition techniques.

Disentangling optical effects in 3D spiral-like, chiral plasmonic assemblies templated by a dark conglomerate liquid crystal.

Chiral thin films showing electronic and plasmonic circular dichroism (CD) are intensively explored for optoelectronic applications. The most studied chiral organic films are the composites exhibiting a helical geometry, which often causes entanglement of circular optical properties with unwanted linear optical effects (linearly polarized absorption or refraction). This entanglement limits tunability and often translates to a complex optical response. This paper describes chiral films based on dark conglomerate, sponge-like, liquid crystal films, which go beyond the usual helical type geometry, waiving the problem of linear contributions to chiroptical electronic and plasmonic properties. First, we show that purely organic films exhibit high electronic CD and circular birefringence, as studied in detail using Mueller matrix polarimetry. Analogous linear properties are two orders of magnitude lower, highlighting the benefits of using the bi-isotropic dark conglomerate liquid crystal for chiroptical purposes. Next, we show that the liquid crystal can act as a template to guide the assembly of chemically compatible gold nanoparticles into 3D spiral-like assemblies. The Mueller matrix polarimetry measurements confirm that these composites exhibit both electronic and plasmonic circular dichroisms, while nanoparticle presence is not compromising the beneficial optical properties of the matrix.

Highly Circularly Polarized Light‐Sensitive Chiral One‐Dimensional Perovskites Enabled by Antisolvent Engineering

AbstractChiral perovskites have emerged as promising next‐generation materials for polarization detection due to their excellent circularly polarized light (CPL) detection capabilities. However, they suffer from a low chiroptical response when fabricated as a polycrystalline thin film, limiting their potential range of applications. Herein, it is demonstrated that antisolvent dripping during the spin‐coating process can effectively improve the chiroptical properties of polycrystalline chiral perovskite thin films. Systematic analysis with different antisolvents reveals that the highly polar antisolvent chloroform interacts with dimethyl sulfoxide molecules via hydrogen bonding. This strong hydrogen bonding suppresses the formation of intermediate and secondary phases and accelerates the crystallization of chiral 1D perovskites, thus reducing the density of the iodine vacancies inside the perovskite thin films. The lower density of iodine vacancies also intensifies the asymmetric tilting inorganic distortion of PbI6 octahedrons, enhancing the chiroptical response of the fabricated chiral perovskite material. Photodetectors based on the chloroform‐treated chiral perovskite films achieve a remarkably high distinguishability of 0.31, outperforming previously reported photodetectors based on the chiral perovskites. The fabricated photodetectors also exhibit outstanding responsivity and detectivity with enhanced operational stability.

Polarization-Sensitive Asymmetric Scattering at the Single-Particle Scale via Surface Plasmon Resonance Microscopy.

Surface plasmon resonance microscopy (SPRM), based on the scattering of single molecules at the interface, is a highly efficient analytical platform widely used in the fields of biology and chemistry. Due to the interference scattering, the imaging pattern exhibits typical parabolic tail and phase transition features, providing a quantitative means of observing the changes in the physical and chemical properties of single molecules. In this work, we reported another unique asymmetric parabolic distribution pattern resulting from polarization conversion in the experiment based on SPRM. This microscopic-level feature is derived from the switching between SPR resonant and nonresonant states. Starting from energy flux theory, we constructed an analysis model and conducted full-wave numerical simulations to verify the experimental results. Furthermore, we demonstrate that the optical rotation induced by chiral thin films can be directly measured through imaging with asymmetric features, providing valuable insights into the field of chiral materials. The quantitative interpretation of asymmetric scattering not only advances the fundamental understanding of the imaging mechanism of SPRM, but also opens up possibilities for utilizing this polarization-sensitive characteristic for single-particle detection and sensing in the future.

Spatially Correlated Chirality in Chiral Two-Dimensional Perovskites Revealed by Second-Harmonic-Generation Circular Dichroism Microscopy.

Understanding the chiral mechanism of chiral hybrid perovskites is a prerequisite for developing relevant chiroptoelectronic applications. Although conventional circular dichroism (CD) spectroscopy can be used to characterize chirality in chiral perovskites, it has a low signal-to-noise ratio and can provide only information about macroscopic chirality. Herein, with the aim of revealing the microscopic chiral mechanism in chiral perovskites, we utilize a spacer cation alloying strategy to construct chiral two-dimensional perovskites. For the first time, we demonstrate second-harmonic-generation CD microarea imaging in chiral perovskite thin films to unveil their spatially correlated chirality. In combination with theoretical calculations, it is revealed that the spatially correlated chirality is caused by localized out-of-plane supramolecular orientations. This work will not only advance the understanding of the mechanism of chiroptical activity in chiral perovskites but also provide inspiration for the rational design and synthesis of perovskites for chirality-related nonlinear optoelectronic devices.

Stepwise Solution-Interfacial Nanoarchitectonics for Assembled Film with Full-Color and White-Light Circularly Polarized Luminescence.

The fabrication of chiral thin films with tunable circularly polarized luminescence (CPL) colors is important in developing chiroptical materials but remains challenging due to the lack of assembly-initiated chiral film formation methodology. Here, by adopting a combined solution aggregation and interfacial assembly strategy, we report the fabrication of chiral film materials with full-color and white-light CPL. A biquinoline glutamic acid ester (abbreviated as BQGE) shows a typical aggregation-induced emission property with blue CPL after solution aggregation. Subsequent interfacial assembly of these solution aggregates on a solid substrate leads to the formation of a CPL active film consisting of nanobelt structures. Since the BQGE molecule has a coordination site, the CPL emission of an individual BQGE film can be extended from blue to green emission upon coordination with a zinc ion, accompanied by morphology transition from nanobelts to nanofibers. Further extension to red-color CPL is successfully achieved by coassembly with an achiral acceptor dye. Interestingly, the proper combination of coordination ratio and acceptor loading ratio provides bright white-light CPL emission from the BQGE/Zn2+/PDA triad composite film. This work provides a new approach to fabricating chiroptical film materials with controlled microscopic morphology and tunable CPL properties.

Highly Efficient Light Helicity Detection of Enantiomers by Chiral Metal-Organic Framework Thin Films.

The potential of chiral metal-organic frameworks (MOFs) for circularly polarized (CP) optics has been largely unexplored. Herein, we have successfully deposited monolithic and highly oriented chiral MOF thin films prepared by a layer-by-layer method (referred to as surface-coordinated MOF thin films, SURMOF) to fabricate CP photodetection devices and distinguish enantiomers. The helicity-sensitive absorption induced by a pair of enantiopure oriented SURMOF was found to be excellent, with an anisotropy factor reaching 0.41. Moreover, the chiral SURMOFs exhibited a pronounced difference in the uptake of the l- and d-tryptophan enantiomers. To demonstrate the potential of these novel MOF thin films for chirality analysis, we fabricated a portable sensor device that allows for chiral recognition by monitoring the photocurrent signals. Our findings not only introduce a new concept of using chiral building blocks for realizing direct CP photodetectors but also provide a blueprint for novel devices in chiral optics.

Layer-by-Layer Grafting Dye on Chiral MOF Thin Films for Circularly Polarized Luminescence

Metal-organic frameworks with chiral feature (chirMOFs) are attracting great attention on circularly polarized luminescence (CPL). However, developing new efficient strategy to achieve or improve CPL properties is an urgent task. Herein, new chiral MOF thin films prepared by liquid-phase epitaxial layer by layer (lbl) growth method (SUR-chirMOF) are composed of D- or L-camphorate (D/Lcam) and aminopyrazine (Pr-NH2) by using liquid phase epitaxial layer by layer (lbl) method. The resulted Zn2(D/Lcam)2Pr-NH2 SURchirMOF shows strong chirality and luminescence but weak CPL emission at 390 nm. After lbl modifying a dye molecule FluoresceinIsothiocyanate (FITC), the chiroptical Zn2(D/Lcam)2Pr-NH-FITC SURchirMOFs with ~7 times CPL signal improvement and ~3 times glum value amplification are obtained. This work provides a new strategy to develop chiral MOF thin films for CPL improvement using lbl grafting approach.

Metal Halide Perovskite Photo-Field-Effect Transistors with Chiral Selectivity.

Organic-inorganic (hybrid) metal halide perovskites (MHPs) incorporating chiral organic ligand molecules are naturally sensitive to left- and right-handed circular polarized light, potentially enabling selective circular polarized photodetection. Here, the photoresponses in chiral MHP polycrystalline thin films made of ((S)-(-)-α-methyl benzylamine)2PbI4 and ((R)-(+)-α-methyl benzylamine)2PbI4, denoted as (S-MBA)2 PbI4 and (R-MBA)2PbI4, respectively, are investigated by employing a thin-film field-effect transistor (FET) configuration. The left-hand-sensitive films made of (S-MBA)2PbI4 perovskite show higher photocurrent under left-handed circularly polarized (LCP) light than under right-handed circularly polarized (RCP) illumination under otherwise identical conditions. Conversely, the right-hand-sensitive films made of (R-MBA)2PbI4 are more sensitive to RCP than LCP illumination over a wide temperature range of 77-300 K. Furthermore, based on FET measurements, we found evidence of two different carrier transport mechanisms with two distinct activation energies in the 77-260 and 280-300 K temperature ranges, respectively. In the former temperature range, shallow traps are dominant in the perovskite film, which are filled by thermally activated carriers with increasing temperature; in the latter temperature range, deep traps with one order of magnitude larger activation energy dominate. Both types of chiral MHPs show intrinsic p-type carrier transport behavior regardless of the handedness (S or R) of these materials. The optimal carrier mobility for both handedness of material is around (2.7 ± 0.2) × 10-7 cm2 V-1 s-1 at 270-280 K, which is two magnitudes larger than those reported in nonchiral perovskite MAPbI3 polycrystalline thin films. These findings suggest that chiral MHPs can be an excellent candidate for selective circular polarized photodetection applications, without additional polarizing optical components, enabling simplified construction of detection systems.

Nanoimprinted 2D-Chiral Perovskite Nanocrystal Metasurfaces for Circularly Polarized Photoluminescence.

The versatile hybrid perovskite nanocrystals (NCs) are one of the most promising materials for optoelectronics by virtue of their tunable bandgaps and high photoluminescence (PL) quantum yields. However, their inherent crystalline chemical structure limits the chiroptical properties achievable with the material. The production of chiral perovskites has become an active field of research for its promising applications in optics, chemistry, or biology. Typically, chiral halide perovskites are obtained by the incorporation of different chiral moieties in the material. Unfortunately, these chemically modified perovskites have demonstrated moderate values of chiral PL so far. Here, a general and scalable approach is introduced to produce chiral PL from arbitrary nanoemitters assembled into 2D-chiral metasurfaces. The fabrication via nanoimprinting lithography employs elastomeric molds engraved with chiral motifs covering millimeter areas that are used to pattern two types of unmodified colloidal perovskite NC inks: green-emissive CsPbBr3 and red-emissive CsPbBr1 I2 . The perovskite 2D-metasurfaces exhibit remarkable PL dissymmetry factors (glum ) of 0.16 that can be further improved up to glum of 0.3 by adding a high-refractive-index coating on the metasurfaces. This scalable approach to produce chiral photoluminescent thin films paves the way for the seamless production of bright chiral light sources for upcoming optoelectronic applications.

Revealing the Intrinsic Chiroptical Activity in Chiral Metal-Halide Semiconductors.

The combination of chirality and semiconducting properties has enabled chiral metal-halide semiconductors (MHS) to be promising candidates for spin- and polarization-resolved optoelectronic devices. Although several chiral MHS with rich chemical and structural diversity have been reported lately, the macroscopic origin of chiroptical activity remains elusive. Here, combining spectroscopic measurements and Mueller matrix analysis, we discover that the previously reported "apparent" anisotropy factor measured from circular dichroism (CD) in chiral MHS thin films is not an intrinsic chiroptical property, but rather, arising from an interference between the film's linear birefringence (LB) and linear dichroism (LD). We verify the presence of LB and LD effects in both one-dimensional and zero-dimensional chiral MHS thin films. We establish spectroscopic methods to decouple the genuine CD from other spurious contributions, which allows a quantitative comparison of the intrinsic chiroptical activity across different chiral MHS. The relationship between the structure and the genuine chiroptical activity is then uncovered, which is well described by the chirality-induced spin-orbit coupling in the chiral structures. Our study unveils the macroscopic origin of chiroptical activity of chiral MHS and provides design principles for obtaining high anisotropic factors for future chiral optoelectronic applications.

Single Skyrmion Generation via a Vertical Nanocontact in a 2D Magnet-Based Heterostructure.

Skyrmions have been well studied in chiral magnets and magnetic thin films due to their potential application in practical devices. Recently, monochiral skyrmions have been observed in two-dimensional van der Waals magnets. Their atomically flat surfaces and capability to be stacked into heterostructures offer new prospects for skyrmion applications. However, the controlled local nucleation of skyrmions within these materials has yet to be realized. Here, we utilize real-space X-ray microscopy to investigate a heterostructure composed of the 2D ferromagnet Fe3GeTe2 (FGT), an insulating hexagonal boron nitride layer, and a graphite top electrode. Upon a stepwise increase of the voltage applied between the graphite and FGT, a vertically conducting pathway can be formed. This nanocontact allows the tunable creation of individual skyrmions via single nanosecond pulses of low current density. Furthermore, time-resolved magnetic imaging highlights the stability of the nanocontact, while our micromagnetic simulations reproduce the observed skyrmion nucleation process.

Depinning phase transition of antiferromagnetic skyrmions with quenched disorder

Antiferromagnetic skyrmions are considered to be promising information carriers due to their attractive properties. Therefore, the pinning phenomenon of antiferromagnetic skyrmions is of great significance. With the Landau-Lifshitz-Gilbert equation, we simulate the nonstationary dynamic behaviors of skyrmions driven by currents in a chiral antiferromagnetic thin film with quenched disorder. Based on the dynamic scaling forms, the critical current and static and dynamic critical exponents of the depinning phase transition are accurately determined. A theoretical analysis using Thiele's approach is presented in comparison with the numerical simulation. Unlike the ferromagnetic skyrmions, the critical current of the antiferromagnetic skyrmions is very sensitive to a small nonadiabatic coefficient. This is important for manipulating antiferromagnetic skyrmions and designing novel information processing devices.

Chiral semiconductor photonic thin film with tunable circularly polarized luminescence

Inorganic nanowires and semiconductor quantum dots are co-assembled into chiral photonic crystals, generating circularly polarized luminescence with a significant dissymmetry factor and tunable peak position, intensity, and sign by controlling the photonic crystals' bandgap, pitch number, and handedness.

Geometric Induction in Chiral Superfluids.

We explore the properties of chiral superfluid thin films coating a curved surface. Because of the vector nature of the order parameter, a geometric gauge field emerges and leads to a number of observable effects such as anomalous vortex-geometric interaction and curvature-induced mass and spin supercurrents. We apply our theory to several well-known phases of chiral superfluid ^{3}He and derive experimentally observable signatures. We further discuss the cases of flexible geometries where a soft surface can adapt itself to compensate for the strain from the chiral superfluid. The proposed interplay between geometry and chiral superfluid order provides a fascinating avenue to control and manipulate quantum states with strain.

Atomic and Molecular Layer Deposition of Chiral Thin Films Showing up to 99% Spin Selective Transport.

Spin electronics is delivering a much desired combination of properties such as high speed, low power, and high device densities for the next generation of memory devices. Utilizing chiral-induced spin selectivity (CISS) effect is a promising path toward efficient and simple spintronic devices. To be compatible with state-of-the-art integrated circuits manufacturing methodologies, vapor phase methodologies for deposition of spin filtering layers are needed. Here, we present vapor phase deposition of hybrid organic-inorganic thin films with embedded chirality. The deposition scheme relies on a combination of atomic and molecular layer deposition (A/MLD) utilizing enantiomeric pure alaninol molecular precursors combined with trimethyl aluminum (TMA) and water. The A/MLD deposition method deliver highly conformal thin films allowing the fabrication of several types of nanometric scale spintronic devices. The devices showed high spin polarization (close to 100%) for 5 nm thick spin filter layer deposited by A/MLD. The procedure is compatible with common device processing methodologies.