Chemiluminescent Acridinium Research Articles

Acridinium-Based Chemiluminescent Receptor-Ligand Binding Assay for Protein/Peptide Hormones.

Chemiluminescent acridinium esters (AE) have been extensively used for oligonucleotide probing and peptide-binding assays in molecular research due to labeling efficiency, lack of radioactivity, and ease of application. In addition to being a powerful and reliable alternative to radiolabeling, AE can be directly bound to the target molecule, with high specificity. Here, we describe an AE-based protein/peptide labeling method and the use of the labeled protein/peptide in a ligand-binding assay.

A rainbow of acridinium chemiluminescence.

Multicolor chemiluminescent acridinium derivatives were synthesized by attaching various common fluorophores to the N10 -acridinium position through a piperazine linker. Triggering of each acridinium derivative using alkaline hydrogen peroxide resulted in a chemiluminescence spectrum dominated by a strong emission (>95%) from the attached fluorophore. The highly quenched emission from the triggered acridinium, acting as a donor, points to a highly efficient intramolecular energy transfer in acridinium-based chemiluminophore-fluorophore tandems. A variable, and in many cases minimal, spectral overlap between the donor emission and the acceptor absorption may indicate that in such tandems the energy transfer follows the Dexter electron exchange mechanism. Moreover, fluorophores affixed through the acridinium 9-position produce a typical acridinium emission profile, demonstrating the need for close distances and favorable intramolecular orientation of the donor and acceptor moieties for the energy transfer to occur. A family of red-shifted chemiluminescent labels, all sharing a uniform triggering method, will find immediate application in multicolor ligand-receptor assays. Along with the multiplexing capabilities, the red-shifted chemiluminescent detection offers a higher tolerance to green-colored biological interferences and will therefore benefit many screening and diagnostic clinical tests.

Acridinium Ester Chemiluminescence: Methyl Substitution on the Acridine Moiety.

Methyl groups were introduced on the acridine moiety in chemiluminescent acridinium esters that have electron-withdrawing groups (trifluoromethyl, cyano, nitro, ethoxycarbonyl) at the 4-position on the phenyl ester. The introduction of methyl groups at the 2-, 2,7-, and 2,3,6,7-positions on the acridine moiety shifted the optimal pH that gave relatively strong chemiluminescence intensity from neutral conditions to alkaline conditions. 4-(Ethoxycarbonyl)phenyl 2,3,6,7,10-pentamethyl-10λ4-acridine-9-carboxylate, trifluoromethanesulfonate salt showed long-lasting chemiluminescence under alkaline conditions. Acridinium esters to determine hydrogen peroxide concentration at pH 7-10 were newly developed.

Strongly Chemiluminescent Acridinium Esters under Neutral Conditions: Synthesis, Properties, Determination, and Theoretical Study.

Various novel acridinium ester derivatives having phenyl and biphenyl moieties were synthesized, and their optimal chemiluminescence conditions were investigated. Several strongly chemiluminescent acridinium esters under neutral conditions were found, and then these derivatives were used to detect hydrogen peroxide and glucose. Acridinium esters having strong electron-withdrawing groups such as cyano, methoxycarbonyl, and nitro at the 4-position of the phenyl moiety in phenyl 10-methyl-10λ4-acridine-9-carboxylate trifluoromethanesulfonate salt showed strong chemiluminescence intensities. The chemiluminescence intensity of 3,4-dicyanophenyl 10-methyl-10λ4-acridine-9-carboxylate trifluoromethanesulfonate salt was approximately 100 times stronger than that of phenyl 10-methyl-10λ4-acridine-9-carboxylate trifluoromethanesulfonate salt at pH 7. The linear calibration ranges of hydrogen peroxide and glucose were 0.05-10 mM and 10-2000 μM using 3,4-(dimethoxycarbonyl)phenyl 10-methyl-10λ4-acridine-9-carboxylate trifluoromethanesulfonate salt at pH 7 and pH 7.5, respectively. The proposed chemiluminescence reaction mechanism of acridinium ester via a dioxetanone structure was evaluated via quantum chemical calculation on density functional theory. The proposed mechanism was composed of the nucleophilic addition reaction of hydroperoxide anion, dioxetanone ring formation, and nonadiabatic transition due to spin-orbit coupling around the transition state (TS) to the triplet state (T1) following the decomposition pathway. The TS which appeared in the thermal decomposition would be a rate-determining step for all three processes.

New chemiluminescent substrates of paraoxonase 1 with improved specificity: synthesis and properties.

Paraoxonase 1 (PON1) is an important hydrolase, and the enzyme activity decreases in patients with liver disease, diabetes, coronary heart disease, etc. Phenyl acetate and organophosphates are usually employed as substrates for serum PON1 activity assay. However, phenyl acetate for arylesterase activity assay exhibits disadvantage of high background. According to properties of PON1, four new chemiluminescent acridinium esters were designed, prepared through three steps, and characterized with (1)H NMR and mass spectrometry (MS) data, and their properties as PON1 substrates were investigated. The hydrolyses of the four compounds catalyzed by recombinant human PON1 (rhPON1) (or serum) followed first-order kinetics within 22 min. The PON1 activator (NaCl, 0.10 mol L(-1)) could boost the rhPON1-mediated and serum-mediated hydrolyses of the acridinium esters to 2.01 ~ 2.26 folds, but 1.0 mol L(-1) NaCl decreased the serum arylesterase activity. RhPON1 showed selectivity over other serum esterases such as lipase, acetylcholinesterase, and esterase D more than 300 folds. By using ethylene diamine tetraacetic acid (EDTA) inhibitor, the specificities of the four substrates toward serum PON1 were determined as 78.3 ~ 92.9%, which is improved than that of the model compound 9-(4-chloro-phenoxycarbonyl)-10-methylacridinium ester triflate. Due to low toxicity, high specificity, and sensitivity of the substrates, they are useful for serum PON1 activity assay.

Synthesis and properties of chemiluminescent acridinium esters with different N-alkyl groups

Acridinium esters containingN-alkyl groups with charge-neutral sulfobetaine zwitterions when compared toN-sulfopropyl groups exhibit faster light emission, improved chemiluminescence stability and lower non-specific binding.

Effect of branching in remote substituents on light emission and stability of chemiluminescent acridinium esters

Acridinium dimethylphenyl esters are widely used as chemiluminescent labels in automated immunoassays for clinical diagnostics in Siemens Healthcare Diagnostics' ADVIA Centaur® systems.

A green synthesis of chemiluminescent N-sulfopropyl acridinium esters in ionic liquids without using the carcinogen 1,3-propane sultone

Chemiluminescent acridinium dimethylphenyl esters containing hydrophilic N-sulfopropyl groups in the acridinium ring are used as labels in automated immunoassays for clinical diagnostics. Introduction of the N-sulfopropyl group in these labels is normally accomplished by N-alkylation of the corresponding, nonchemiluminescent acridine ester precursors with the toxic carcinogen 1,3-propane sultone. In the current study, we report that sodium 3-bromopropane sulfonate in ionic liquids (ILs) is a benign alternative to 1,3-propane sultone for introducing the N-sulfopropyl group in chemiluminescent acridinium ester labels. The sultone reagent can be eliminated in the synthesis of N-sulfopropyl acridinium dimethylphenyl ester labels by taking advantage of the increased reactivity of acridan esters toward nontoxic sodium 3-bromopropane sulfonate in [BMIM][BF4]. Sodium 3-bromopropane sulfonate in ILs is also potentially a nontoxic alternative to 1,3-propane sultone for introducing the water-soluble, three-carbon sulfobetaine moiety in other molecules as well.

Use of degradable cationic surfactants with cleavable linkages for enhancing the chemiluminescence of acridinium ester labels

Chemiluminescent acridinium dimethylphenyl esters labels are widely used for clinical diagnostics in automated immunochemistry instruments such as in Siemens' Healthcare Diagnostics' ADVIA Centaur® systems. Light emission from these labels is triggered with alkaline peroxide in the presence of the cationic surfactant cetyltrimethylammonium chloride (CTAC). CTAC plays a very important role in the chemiluminescence process by both accelerating emission kinetics as well as increasing light yield from acridinium esters thereby enabling fast and sensitive measurements in automated assays. However, cationic surfactants such as CTAC are quite toxic especially to aquatic life when discharged into the environment. In the current study, we report that less toxic, degradable cationic surfactants containing carbonate or amide linkages are effective substitutes for CTAC in enhancing chemiluminescence from acridinium ester labels. The carbonate cationic surfactant 2 in particular closely mimicked the behavior of CTAC in enhancing acridinium ester chemiluminescence and showed excellent long term stability when stored in acidic solution. Our study is the first to report the use of degradable surfactants for enhancing the chemiluminescence of commercially-used, acridinium ester labels. Degradable surfactants are also likely to be useful for the chemiluminescence enhancement of other commercially-used labels such as acridinium sulfonamides and adamantly dioxetanes.

Synthesis and properties of differently charged chemiluminescent acridinium ester labels

Chemiluminescent acridinium dimethylphenyl esters containing N-sulfopropyl groups in the acridinium ring are highly sensitive, hydrophilic labels that are used in automated immunoassays for clinical diagnostics. Light emission from these labels is triggered with alkaline peroxide in the presence of a cationic surfactant. At physiological pH, N-sulfopropyl acridinium esters exist as water adducts that are commonly referred to as pseudobases. Pseudobase formation, which results from addition of water to the zwitterionic N-sulfopropyl acridinium ring, neutralizes the positive charge on the acridinium nitrogen and imparts a net negative charge to the label due to the sulfonate moiety. As a consequence, N-sulfopropyl acridinium ester conjugates of small molecule haptens as well as large molecules such as proteins gain negative charges at neutral pH. In the current study, we describe the synthesis and properties of two new hydrophilic acridinium dimethylphenyl ester labels where the net charge in the labels was altered. In one label, the structure of the hydrophilic N-alkyl group attached to the acridinium ring was changed so that the pseudobase of the label contains no net charge. In the second acridinium ester, two additional negative charges in the form of sulfopropyl groups were added to the acridinium ring to make this label's pseudobase strongly anionic. Chemiluminescence measurements of these labels, as well as their conjugates of an antibody with a neutral pI, indicate that acridinium ester charge while having a modest effect on emission kinetics has little influence on light output. However, our results demonstrate that acridinium ester charge can affect protein pI, apparent chemiluminescence stability and non-specific binding of protein conjugates to microparticles. These results emphasize the need for careful consideration of acridinium ester charge in order to optimize reagent stability and performance in immunoassays. In the current study, we observed that for a neutral protein, an acridinium ester with a hydrophilic but charge-neutral N-alkyl group afforded faster light emission, lower non-specific binding and better chemiluminescence stability than an analogous label with an anionic N-alkyl group.

Chemiluminescence from alkoxy-substituted acridinium dimethylphenyl ester labels

Chemiluminescent acridinium dimethylphenyl ester labels are used in automated immunoassays for clinical diagnostics. Light emission from these labels is triggered by alkaline peroxide in the presence of the cationic surfactant cetyltrimethylammonium chloride (CTAC). The surfactant plays a critical role in the chemiluminescence process of these labels by both accelerating their emission kinetics and increasing total light output enabling high throughout and improved assay sensitivity in automated immunoassays. Despite the surfactant's crucial role in the chemiluminescent reaction, no study has investigated how structural perturbations in the acridinium ring could impact the influence of the surfactant. We describe herein the synthesis and properties of three new alkoxy-substituted, acridinium dimethylphenyl esters where the nature of the alkoxy group in the acridinium ring was varied (hydrophobic or hydrophilic). Chemiluminescence measurements of these alkoxy-substituted labels indicate that hydrophilic functional groups in the acridinium ring, in particular sulfobetaine zwitterions, disrupt surfactant-mediated compression of emission times but not enhancement of light yield. These results support the hypothesis that surfactant-mediated effects require the binding of two different reaction intermediates to surfactant aggregates and, that surfactants influence light emission from acridinium esters by two separate mechanisms. Our studies also indicate that preservation of both surfactant effects on acridinium ester chemiluminescence and low non-specific binding of the label can be achieved with a relatively hydrophobic acridinium ring coupled to a hydrophilic phenolic ester leaving group.

Zwitterionic reagents for labeling, cross-linking and improving the performance of chemiluminescent immunoassays

Improving reagent performance in immunoassays both to enhance assay sensitivity and to minimize interference are ongoing challenges in clinical diagnostics. We describe herein the syntheses of a new class of hydrophilic reagents containing sulfobetaine zwitterions and their applications. These zwitterionic reagents are potentially useful for improving the properties of immunoassay reagents. We demonstrate for the first time that zwitterion labeling is a general and viable strategy for reducing the non-specific binding of proteins to microparticles and, to improve the aqueous solubility of hydrophobic peptides. We also describe the synthesis of zwitterionic cross-linking reagents and demonstrate their utility for peptide conjugation. In automated, chemiluminescent immunoassays, improved assay performance was observed for a hydrophobic, small analyte (theophylline) using an acridinium ester conjugate with a zwitterionic sulfobetaine linker compared to a hexa(ethylene)glycol linker. Sandwich assay performance for a large analyte (thyroid stimulating hormone) was similar for the two acridinium ester labels. These results indicate that zwitterions are complementary to poly(ethylene)glycol in improving the aqueous solubility and reducing the non-specific binding of chemiluminescent acridinium ester conjugates.

Facile N-alkylation of acridine esters with 1,3-propane sultone in ionic liquids

Hydrophilic chemiluminescent acridinium esters containing N-sulfopropyl groups are extremely useful labels in the clinical diagnostics industry. The synthesis of these labels is normally accomplished by N-alkylation of the acridine ester precursors with the carcinogenic reagent 1,3-propane sultone in neat reactions where the alkylating reagent also serves as the solvent. Product yields are often poor, the reactions are not reproducible and are also difficult to scale-up. In our efforts to develop a greener and a more efficient synthesis of N-sulfopropyl acridinium esters, we have discovered that commonly used room temperature ionic liquids such as [BMIM][BF4] and [BMIM][PF6] are excellent media for the N-alkylation of poorly reactive acridine esters with 1,3-propane sultone. Advantages include a significant reduction in the amount of toxic 1,3-propane sultone needed for good conversion to product, and minimal formation of polysulfonated products. The alkylation reaction in ionic liquids is amenable to scale-up for the synthesis of gram quantities of hydrophilic, chemiluminescent acridinium esters.

Effect of surfactants on the chemiluminescence of acridinium dimethylphenyl ester labels and their conjugates

Chemiluminescent acridinium dimethylphenyl esters, containing two methyl groups flanking the phenolic ester bond, display excellent chemiluminescence stability and are used as labels in automated immunoassays for clinical diagnostics. Light emission from these labels is triggered with alkaline peroxide in the presence of the cationic surfactant cetyltrimethylammonium chloride. Under these conditions, light emission is rapid and is complete in <5 s. In the present study we examined the effect of various surfactants on light emission from acridinium dimethylphenyl ester labels and their conjugates containing hydrophilic linkers derived either from hexa(ethylene)glycol or a sulfobetaine zwitterion. Sulfobetaine zwitterions are very polar and incorporation of these functional groups in acridinium dimethyphenyl esters and their conjugates represents a new approach to improving the aqueous solubility of these chemiluminescent labels. Our results indicate that in general, surfactants affect light emission from these labels and their conjugates by two discrete mechanisms. Cationic surfactants, but not anionic or non-ionic surfactants, accelerate overall light emission kinetics and a more modest effect is observed with zwitterionic surfactants. Surfactants also enhance total light output and the magnitude of this enhancement is maximal for cationic surfactants and a sulfobetaine zwitterionic surfactant. These observations are the first to clearly delineate the role of the surfactant on the chemiluminescence reaction pathway of acridinium esters and can be rationalized based on known effects of surfactant aggregates on bimolecular and unimolecular reactions.

Enhanced immunoassay sensitivity using chemiluminescent acridinium esters with increased light output

Chemiluminescent acridinium ester labels are widely used in clinical diagnostics especially in automated immunochemistry analyzers such as Siemens Healthcare Diagnostics’ ADVIA Centaur® systems. Although, chemiluminescence from acridinium compounds was discovered more than 50 years ago, details regarding the excitation process are still not well understood particularly in relation to acridinium structure and overall light output. Herein, we report an empirical study that correlates the presence of electron-donating methoxy groups at C-2 and/or C-7 in the acridinium ring with increased light output. We further demonstrate that these high light output labels can be combined with hydrophilic functional groups such as hexa(ethylene)glycol to generate unique acridinium esters that are stable and are useful in improving immunoassay sensitivity for both competitive and sandwich automated immunoassays.

Optimization and development of a high-performance liquid chromatography-based one-site immunometric assay with chemiluminescence detection

Various practical and theoretical considerations were examined in the creation and optimization of a high-performance liquid chromatography (HPLC)-based one-site immunometric assay. This method used an HPLC analyte analog column and post-column chemiluminescence detection. The specific analyte chosen as the model for this study was l-thyroxine (also known as T 4). In this technique, a sample containing thyroxine was first combined with an excess of anti-T 4 antibody Fab fragments that had earlier been conjugated with chemiluminescent acridinium ester labels. After incubation, the mixture was injected onto a column that contained immobilized T 4. The amount of thyroxine in the original sample was then determined by measuring the labeled Fab fragments that appeared in the non-retained fraction, or the decrease in excess Fab fragments that were bound to and later eluted from the column. Items considered in creating this assay included the preparation of acridinium ester-labeled Fab fragments, the detection of these fragments with a post-column reactor, and the creation of a suitable immobilized analog column for capturing excess labeled Fab fragments. The final method could measure T 4 in standards at clinically-relevant concentrations and provided a response within 1.5 min of sample injection, following a 20–45 min incubation with the labeled Fab fragments. Possible applications of this method include its use in clinical chemistry and the screening of proteomic or combinatorial libraries.

High stability and high efficiency chemiluminescent acridinium compounds obtained from 9‐acridine carboxylic esters of hydroxamic and sulphohydroxamic acids

High stability and high efficiency chemiluminescent acridinium compounds obtained from 9‐acridine carboxylic esters of hydroxamic and sulphohydroxamic acids

O-(Acridinium)hydroxylamine (AHA): a reagent for the preparation of chemiluminescent acridinium oxime (AO)-steroid conjugates

O-(Acridinium)hydroxylamine (AHA) reacted with a representative sample of oxo-steroids (6-oxoestradiol, estrone, norethindrone, cortisol, progesterone, digoxin dialdehyde, and digitoxin dialdehyde) to produce chemiluminescent acridinium oxime (AO) conjugates in a single step in 37–68% yield after preparative HPLC.

High stability and high efficiency chemiluminescent acridinium compounds obtained from 9-acridine carboxylic esters of hydroxamic and sulphohydroxamic acids.

A series of hydroxamic acids and sulphohydroxamic acids were prepared and linked to 9-acridinecarboxylic acid through a pseudo-ester function. After N-methylation of the heterocyclic ring, the different compounds were tested for their chemiluminescent properties. Substituents on the hydroxamic functions have shown various effects (steric or electronic) on the luminescence yield or stability of the molecule. The most interesting derivatives were selected in terms of chemical stability and chemiluminescence efficiency. 9-[(N-hydroxysuccinimidyl-4-oxo-4-N-phenylaminobutanoate)N-carb oxylat e]-10-methyl-acridinium (FA6), 9-(N-phenylpivalamide-N-carboxylate)-10-methylacridinium (FA17) and 9-(N-phenylpivalamide N-carboxylate)-10-carboxymethyl-acridinium (FA18) iodomercurates are very promising as chemiluminescent labels. These compounds can be detected at very low levels (10(-16)-10(-17) mol/L) and in our stability evaluation, FA6, FA17 and FA18 showed similar results to the acridinium ester DMAE. Their half-lives at 20 degrees C are greater than 2 weeks.

Synthesis of a chemiluminescent acridinium hydroxylamine (AHA) for the direct detection of abasic sites in DNA.

[structure: see text] The synthesis of a chemiluminescent acridinium hydroxylamine (AHA) for the direct detection of abasic sites in damaged nucleic acids is described. The reagent reacts readily with abasic sites of damaged calf thymus DNA generated in a time-dependent manner under acid/heat depurination conditions. Preliminary results indicate the sensitivity of the direct chemiluminescent detection format is approximately 0.1 abasic sites detected per 10(6) nucleotides using as little as 200 ng of DNA.