Chemical Reactivity Descriptors Research Articles

Photophysical and antitubercular studies on newly synthesised structurally architectured sulphonamide

This study presents the synthesis and characterisation of four mono-azo sulphonamide derivatives through diazo-coupling electrophilic substitution reactions. The structural analysis of the synthesised molecules was conducted utilising FT-IR, 1H-NMR and HR-MS techniques. Absorption and fluorescence maxima of the synthesised molecules were determined across solvents of varying polarity to explore Solvatochromic behaviour. Density functional theory was employed to elucidate electronic and optical properties, including the computation of HOMO–LUMO energies using Gaussian 09W software, with comparisons to experimental data. Molecular electrostatic potential 3D plots identified electrophilic and nucleophilic sites. Solvent interactions were evaluated using Kamlet–Abboud Taft and Catalan parameters. Further, global chemical reactivity descriptors were estimated to ascertain chemical reactivity of the molecules. Additionally, the effectiveness of the colourant anti-tubercular activity was evaluated using in vitro and molecular docking techniques. The biological activity results reveal that methyl-pyridone and barbituric acid coupled with sulphamethizole (SMP and SMB) displayed excellent anti-tubercular activity compared with the standard Gentamycin.

Theoretical screening of N-[5'-methyl-3'-isoxasolyl]-N-[(E)-1-(-2-thiophene)] methylidene]amine and its isoxazole based derivatives as donor materials for bulk heterojunction organic solar cells: DFT and TD-DFT investigation.

In the present work, the influence of aromatic ring substitution on a series of small-donor organic molecules (A, B, C, D, and E) with isoxazole cores was investigated for photovoltaic applications in organic solar cells. Frontier molecular orbital analysis, chemical reactivity descriptors, dipole moment, and population analysis showed that all the organic materials have intramolecular charge transfer abilities capable of donating electrons to the acceptor material (PCBM). The required photovoltaic parameters such as Voc, FF, Jsc, LHE, and other associated optoelectronic parameters are reported. The results demonstrate that aromatic ring substitution influences charge transfer and power conversion efficiencies of solar cells. That is, an increase in the aromatic character of a material increases its charge transfer, and as a result, its photovoltaic properties are increased. Additionally, all the investigated derivatives are good charge transporters with suitable electron reorganization energies, which are beneficial for minimizing energy loss. Hence, these organic derivatives with isoxazole backbones are promising materials and may provide fresh insights into the design of new materials for organic solar cell applications. All calculations were performed using DFT and the ORCA 4.1.0 program package as the main tool for geometry optimization and frequency calculations. The Avogadro 1.2.1 visualization tool was used to prepare all input files executed by ORCA 4.1.0. The BP86, B3LYP, and wB97M series of functionals coupled with the def2/TZVP basis set were employed for geometry optimization. All energy-related calculations were carried out using the M06-2x functional. Multiwfn version 3.7 was used for aromaticity and population analysis. Excited state and UV-visible spectra were simulated using the TD-DFT method at the CAM-B3LYP-D3, wB97X-D3, and PBE0-D3 coupled with the ma-def2-TZVP basis set. Moreover, solvent effects were incorporated using the SMD scheme as incorporated in the ORCA software. Lastly, the RIJCOSX approximations were used to speed up calculations while maintaining accuracy.

The electronic, structural and nonlinear optical properties of licochalcone L in the aqueous solution and gaseous phase: A DFT study

In the present article, various conformers of licochalcone L, a chalcone derivative extracted from the G. inflata root, have been analyzed in the aqueous solution and gaseous phase using calculation based on density functional theory (DFT). Nonlinear optical parameters such as dipole moment (μ), mean polarizability (α), polarizability anisotropy (Δα) and the first order hyperpolarizability (β) have been estimated to examine the NLO properties of the title molecule. These parameters were found to be significantly higher than those of standard molecules, indicating the potential NLO applications of licochalcone L. The analysis of natural bond orbitals (NBO) has been carried out to characterize various intramolecular interactions. The nucleus-independent chemical shift (NICS) technique has been used to investigate the aromaticity. Further, the pKa values have been computed for each hydroxyl group, revealing that the neutral form predominates at physiological pH, while the monoanionic form becomes predominant at pH greater than 9. The impact of solvation on the molecular electrostatic potentials and frontier molecular orbitals has been investigated for the neutral as well as monoanionic form of licochalcone L. A variety of global chemical reactivity descriptors have been calculated to highlight the structure-activity relationship.

Unveiling the therapeutic potential of organotellurium(IV) Schiff base complexes through structural elucidation, antimalarial, antioxidant and antimicrobial studies

Infectious diseases have long been a formidable adversary to human health and well-being, presenting a persistent global challenge with far-reaching implication for individuals, communities and societies at large. Thus, with the aim of a combating agent against malarial and oxidant causing ailments, the newly synthesized Organotellurium(IV) complexes with a hydroxynaphthaldehyde Schiff base ligand are proposed in the present research. The structures of the complexes were established through various physical and spectral analysis. The weak electrolytic (8.77 to 35.08 ohm−1 cm2 mol−1) and crystalline nature of the compounds were demonstrated by molar conductivity and TGA, respectively. The ligand and complexes (7a-7f) shows molecular ion peaks at m/z 458.3563, 726.1039, 713.6978, 727.6179, 799.4780, 771.3178 and 799.3978 amu which were well consistent with their formula, revealing formation of compounds. The shifting of ligand's azomethine peak (7.74 ppm) and disappearance of naphthyl hydroxyl proton (12.28 ppm) in 1H NMR spectra confirmed the chelation of ligand with metal ion in proposed manner. In the FT-IR spectra, the complexation of ligand with metal ion was confirmed by disappearance of hydroxyl group (3355 cm−1) band and shifting of C = N (1245 cm−1) and CO (1632 cm−1) band whereas appearance of Te-O (of 285–293 cm−1) and Te-N (458–467 cm−1) bands, revealed the bonding of metal with metal and octahedral nature of the complexes. Optimized structures, HOMO-LUMO energies and associated chemical reactivity descriptors of the compounds were computed by DFT calculations. The in vitro studies demonstrate that the complexes 7c (1.06 ± 0.11 μM) and 7f (1.22 ± 0.05 μM) exhibited moderate inhibition of the Plasmodium falciparum 3D7 strain, complexes 7a (100.96 ± 0.32 μg/mL) and 7d (96.32 ± 0.40 μg/mL) demonstrated the highest free radical quenching ability. Complex 7c displayed the highest antibacterial actions, whereas 7f exhibited the highest antifungal actions against the tested pathogens. Molecular docking and ADMET studies demonstrated enhanced binding affinity of the complexes compared to the Schiff base and their drug-like qualities.

Green synthesis of a novel bis-Schiff base derived from 4-N, N-dimethylaminobenzaldehyde and hexamethylenediamine: DFT study

The study focuses on the green synthesis of a novel bis-Schiff base (EE) derived from 4-N, N-dimethylaminobenzaldehyde, and hexamethylenediamine. The structural properties of the bis-Schiff base were investigated using experimental methods such as IR, 1HNMR, 13CNMR, and elemental analyses (CHN). Computer simulation using Gaussian03 software at DFT/B3LYP/6-311G (d, p) level of theory was also used to identify the structural parameters, geometrical isomers, conformational analysis, Mulliken charges, optical properties, frontier orbitals, electrostatic potential maps, and chemical reactivity descriptors of the bis-Schiff base. The formation mechanism of EE and its geometrical isomers were studied. The study compares theoretical and experimental IR, 1HNMR, and 13CNMR spectra, highlighting the importance of green chemistry in reducing toxic organic solvents and chemicals.

Molecular structure, optical, first-order hyper polarizability, electronic properties, reactivity (ELF and LOL) − computational analysis using DFT and Multiwfn for 2, 3-diaminopyridinium selenate

A detailed study on the first principle calculations of 2,3-diaminopyridinium selenite (2,3-DAPS) – an organometallic salt has been performed using B3LYP/6–311++G(d,p). Single crystal X-ray diffraction (XRD) analysis confirms that the crystal formed exhibits a monoclinic crystal structure, specifically belonging to the centrosymmetric space group P21/c. The obtained primitives and interfacial angles are as follows: a = 7.4978(15)Å, b = 7.6681(15) Å, c = 14.314(3) Å, α = γ = 90°, β = 93.75(3)°, and the volume of the unit cell V = 821.2(3) (Å)3. The structure was optimized with a global minimum. The natural bonding orbital charge transfer studies between the cation and anion was performed to gain insights into their electronic interactions. Energy gap and other global chemical reactivity descriptors have been computed with the aid of molecular orbital studies. The influence of solvent on the absorption spectra provided the evidence of solvent–solute interactions and their impact on the electronic transitions within the molecule. The presence of electrophilic and nucleophilic reactivity in the chemical is indicated by the molecular electrostatic potential (MEP) map. From the nonlinear optical (NLO) studies, it has been found that the first-order hyperpolarizability value is 30.771 × 10−31 esu, which is 8.252 times that of urea. This suggests that the compound may be a better non-linear optical material and suitable for laser applications. To calculate the proportion of intermolecular interactions and examine the distribution compound's electrostatic potential, a Hirshfeld surface analysis was conducted. The analysis provided insights into the spatial arrangement of molecules and their interactions. Additionally, topology path calculations elucidated the intrinsic connectivity between critical points, shedding light on the bonding characteristics within the compound. The likelihood of electron density at bonding and anti-bonding sites was also determined using the Electron Localization Function (ELF) and Localised Orbital Locator (LOL) plots. These analyses aided in understanding the electron distribution and the nature of chemical bonding within the compound, providing valuable information about its electronic structure and reactivity.

DFT Calculations, Molecular Docking, and Pharmacological Properties Investigation for 5-Benzoxazolecarboxylic Acid as a Target Anti-Cancer Agent

In this study, the electronic properties of the 5-Benzoxazolecarboxylic acid molecule, a benzoxazole derivative, were calculated at the DFT/B3LYP/6-311++G(d,p) level of theory. Electronic properties and chemical reactivity of the optimized structure, such as Frontier molecular orbital (FMO), global and chemical reactivity descriptors, molecular electrostatic potential (MEP), and charge analyses (APT, Hirshfeld, and NBO), were investigated. Also, electronic properties are supported by electron localization function (ELF) and localized orbital locator (LOL) analyses. Toxicity effects such as mutagenic, tumorigenic, irritant, reproductive effect, and physicochemical properties such as druglikeness and drugscore were investigated. Molecular docking studies were conducted with the vascular endothelial growth factor receptor VEGFR-2 and the PARP-2 inhibitor, which is involved in many critical cellular processes, including DNA single-stranded fracture repair and cell death control, and its effectiveness in cancer treatment was investigated.

Innovation of some novel complexes based on 1‐(4‐nitrophenyl)‐1H‐1,2,3‐triazol‐4‐yl)methanol ligand: Synthesis, structural elucidation DFT calculation and pharmaceutical studies

Novel divalent chelates of Co (II), Cu (II), Zn (II) and Ni (II) were prepared and described of the form [M (NTM)(CH3COO)2] where NTM = [1‐(4‐nitrophenyl)‐1H‐1,2,3‐triazol‐4‐yl)methanol ligand. Elemental analyses, infrared red, 1H and 13CNMR, electronic, magnetic susceptibility, conductivity measurements and X‐ray diffraction studies were used to assess our divalent metal complexes. Moreover, the stability and stoichiometry of the novel metal chelates were examined through the job's method in solutions. Correlation of all spectroscopic techniques states that NTM acts as a bi‐dentate NO ligand to afford octahedral complex geometry for all the investigated metal chelates. Thermodynamic and kinetics factors for various thermal degradation phases were calculated. Moreover, B3LYP/LANL2DZ/6‐311 g(d,p) theoretical study has been applied for estimating the MEP and quantum chemical reactivity descriptors of studied molecules. Moreover, the UV–Vis absorption spectra for the investigated molecules are predicted via the time‐dependent DFT (TD‐DFT) calculations. In addition, MOE‐ docking was tested on two different proteins, the receptor of (3HB5) breast cancer mutant oxidoreductase as well as the receptor of Glucosamine‐6‐phosphate synthase in complex with glucosamine‐6‐ phosphate of (2VF5) E.coli and COVID‐19 protease. The results recommended that the (NTMCo), (NTMNi), (NTMCu) and (NTMZn) complexes showed the highest inhibitory activity compared to the other NTM ligands as antimicrobial and breast cancer candidates. Furthermore, in‐vitro anti‐bacterial, anti‐fungal, cytotoxic and anti‐oxidant performances for the selected ligand as well as its chelates were studied. All metal chelates presented superiority, proceeding free organic ligand ineffective management, definitely NTMCu complex.

Synthesis, crystal structure, DFT calculations, NBO, Fukui function, NCI-RDG, Hirshfeld surface analysis, NLO properties and molecular docking analysis on (E)-N'-(3-methoxybenzylidene)-2-(quinolin-8-yloxy) acetohydrazide

In this study, we present the synthesis and characterization of a novel organic compound, (E)-N'-(3-methoxybenzylidene)-2-(quinolin-8-yloxy) acetohydrazide. Our characterization includes single crystal X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and UV–visible spectroscopy. We also conducted Hirshfeld surface (HS) analysis to investigate intermolecular interactions. The compound crystallizes in the triclinic system with space group P−1. We employed density functional theory (DFT) with the B3LYP function and the 6–311 G (d, p) basis set to calculate its electronic properties. Additionally, we explored its nonlinear optical (NLO) behavior, determining the electric dipole moment (μ), polarizability (α), and hyperpolarizability (β), second-order hyperpolarizabilities (γ) using the same basis set. To evaluate the NLO properties of MBQA, we conducted frontier molecular orbitals (FMO) analysis, examined HOMO-LUMO energies, determined the energy band gap, studied the density of states (DOS), and assessed global chemical reactivity descriptors. We also performed a molecular electrostatic potential (MEP) simulation to identify optimal sites for both electrophilic and nucleophilic attacks. Our analysis further included a reduced density gradient (RDG) analysis to investigate various types of intermolecular interactions in MBQA, such as repulsive, attractive, and Van der Waals interactions while also distinguishing between strong and weak interactions. To understand the molecular stability and interactions, we conducted natural bond orbital (NBO) analysis, which provided insights into hyperconjugative interactions, charge delocalization and electron density ED among the molecular components. Finally, we assessed the biological activity of the MBQA molecule by predicting its potential pharmacological activities using the prediction of activity spectra for substances (PASS) and conducting molecular docking analyses. This comprehensive study provides valuable insights into the structural, electronic, and biological properties of (E)-N'-(3-methoxybenzylidene)-2-(quinolin-8-yloxy) acetohydrazide (MBQA).

DFT Studies of the Activity and Reactivity of Limonene in Comparison with Selected Monoterpenes.

Nowadays, the effective processing of natural monoterpenes that constitute renewable biomass found in post-production waste into products that are starting materials for the synthesis of valuable compounds is a way to ensure independence from non-renewable fossil fuels and can contribute to reducing global carbon dioxide emissions. The presented research aims to determine, based on DFT calculations, the activity and reactivity of limonene, an organic substrate used in previous preparative analyses, in comparison to selected monoterpenes such as cymene, pinene, thymol, and menthol. The influence of the solvent model was also checked, and the bonds most susceptible to reaction were determined in the examined compounds. With regard to EHOMO, it was found that limonene reacts more easily than cymene or menthol but with more difficultly than thymol and pienene. The analysis of the global chemical reactivity descriptors "locates" the reactivity of limonene in the middle of the studied monoterpenes. It was observed that, among the tested compounds, the most reactive compound is thymol, while the least reactive is menthol. The demonstrated results can be a reference point for experimental work carried out using the discussed compounds, to focus research on those with the highest reactivity.

The Effect of Global and Local Chemical Reactivity Descriptors in the Determination of Properties of Transition Metal Clusters

Recently, research on material properties has got lots of attention because of their promising technological applications. In this paper, the author’s focus is on the global and local chemical reactivity descriptors of some transition metal clusters. In addition, the author also include findings of chemical properties with reactivity descriptors. Furthermore, according to Thomas–Fermi approximation and from the exact formulation of Density Functional Theory by Hohenberg and Kohn’s theorem, the author introduce electronegativity and the theory of hardness and softness for further investigation of chemical properties of the clusters. As a part of investigations, the author also introduce the Fukui functions with an emphasis for the determinations of chemical reactivity descriptors. All the results are obtained by theoretical investigation of electronegativity), Chemical potential (), chemical hardness (), and polarizability () of the given transition metal clusters (Cr and Mn). From the results, the author observed that the ionization potential of the clusters increases with decreasing cluster size as the clusters become more stable and tend towards chemical inertness. In conclusion, determination of the reactivity descriptors of the transition metal clusters show results that are in line with previous experimental and theoretical findings.

Design, one-pot novel synthesis of substituted acridine derivatives: DFT, structural characterisation, ADME and anticancer DNA polymerase epsilon molecular docking studies

A novel type of reaction synthesis of an acridine derivative alkaloid of 9-chloro-1-methylacridine-4-carboxylic acid (CMAC) and structurally characterised. FT-IR, 1H NMR, 13C NMR, and GC-mass spectrometry were used. Density functional theory calculations were performed to understand the electronic properties of the molecular structures, including the frontier molecular orbital (FMO), molecular electrostatic potentials (MEP), NLO material properties, RDG studies, and global chemical reactivity descriptors. Furthermore, Theoretical IR, a vibrational wavenumber was obtained for the title compound by simulation and compared with the experimental wavenumbers. Vibrational energy distribution analysis (VEDA) software was used for potential energy decomposition (PED) analysis. Finally, the bioavailability of the title compound was examined by (ADME/Tox) absorption, distribution, metabolism, and excretion properties. DNA polymerase epsilon, which carries a P301R substitution (PDB ID: 6g0a), was used as the receptor for employing an in silico molecular docking process. The docking study revealed the significant interactions between the receptor active sites and the CMAC ligand.

Significant Increase in the Dipole Moment of Graphene on Functionalization: DFT Calculations and Molecular Dynamics Simulations.

The limited solubility of graphene in water can be attributed to the existence of π-π bonds connecting its layers. Functionalized graphene or graphene oxide (GO) is frequently produced in order to overcome the shortcomings of graphene. Using density functional theory (DFT) calculation, functionalized graphene with various combinations of hydroxyl, epoxy, and carboxylic functional groups were investigated computationally. The study focused on the effects of functional group combinations on the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energies, giving information about the chemical reactivity and stability of the molecules under investigation. Global chemical reactivity descriptors, including chemical hardness, softness, electronegativity, chemical potential, and electrophilicity index, were calculated to further elucidate the overall stability and reactivity of the molecules. The results demonstrated that the introduction of oxygen-containing functional groups on graphene significantly influenced its electronic properties, leading to variations in the chemical reactivity and stability. Molecular electrostatic potential (MEP) maps highlighted the susceptibility of specific regions to electrophilic and nucleophilic attacks. The flexibility and stability of functionalized graphene through root mean square fluctuation (RMSF) and root mean square deviation (RMSD) analyses indicate the stability of functionalized graphene in water. This comprehensive computational investigation provides valuable insights into the design and understanding of functionalized graphene for potential applications in drug delivery.

DFT based Experimental investigations on the spectroscopic properties, molecular structure, and biological activity of a glucocorticoid steroid, Prednisolone

This study presents a comprehensive investigation into Prednisolone, a glucocorticosteroid drug, through vibrational analysis and DFT based quantum chemical calculations. Utilizing the DFT-B3LYP functional at the basis set 6-311++G(d,p), the research explores conformational and geometric aspects, harmonic vibrational wavenumbers, and FMO analysis. The phase angle of pseudo rotation is measured to predict the molecule's conformation. FT-IR and Raman spectra were analyzed and found that the lowering of symmetric stretching vibrations of O25-H53 and O24-H52 to 3470 and 3362 cm−1 respectively, is due to the presence of intra/intermolecular hydrogen bonding. Topology analysis (AIM, NCI,ELF, LOL) global chemical reactivity descriptor study, Hirshfeld surface analysis and electron excitation studies provide a detailed understanding of Prednisolone's molecular properties. AIM analysis proved the possibility of a strong hydrogen bond H53…….O24, because it has the minimum bond length of 1.9645 Å, accompanied by a maximum ρ value of 0.0255 a.u. The hydrogen bond O24…….H53 —– O25, indicated by blue RDG isosurfaces in NCI, with value of sign (λ2) ρ between -0.02 to -0.05 a.u, is predicted to be strong. Bandgap energy of the molecule calculated from HOMO-LUMO is 4.7105. This is well agreement with the results obtained from experimental UV-visible spectra. Molecular docking study, Drug likeness parameter analysis and ADMET properties helps in predicting the anti-inflammatory activity of the molecule.

Slow evaporation synthesis, crystal structure, DFT calculations, molecular docking, and pharmacokinetic studies of hexaaquazinc(II) dihydrogen benzene-1,2,4,5-tetracarboxylate

A new complex formed from the reaction of benzene-1,2,4,5-tetracarboxylic dianhydride with zinc(II) acetate dihydrate was synthesized and characterized by single-crystal X-ray diffraction, thermal analysis (TGA), and density functional theory (DFT). [C10H4O8][Zn(H2O)6] (1), crystallized in a monoclinic system with space group P2/m. Theoretical modeling was performed at the DFT/B3LYP computational level with 6–311 G(d,p) and LanL2DZ basis sets. The Zn(II) is six-coordinate, forming an ideal octahedral geometry. A Hirshfeld surface analysis of the complex indicated that H···O/O···H contacts contribute to 47.8% of the crystal packing. The stability of 1 was investigated by determining the global chemical reactivity descriptors (GCRD). The nonlinear optical (NLO) behavior was investigated by analyzing the dipole moment, polarizability, and first-order hyperpolarizability (μ, α and β) via a theoretical approach, indicating that 1 has important nonlinear optical properties. A molecular docking study shows binding of 1 on the active site of receptors from human cyclooxygenase-2 enzyme (PDB code: 5IKT) and Escherichia coli MenB (PDB code: 3T88).

Microalgae derived honeycomb structured mesoporous diatom biosilica for adsorption of malachite green: Process optimization and modeling

The present study investigated the removal of malachite green dye from aquifers by means of microalgae-derived mesoporous diatom biosilica. The various process variables (dye concentration, pH, and adsorbent dose) influencing the removal of the dye were optimized and their interactive effects on the removal efficiency were explored by response surface methodology. The pH of the solution (pH = 5.26) was found to be the most dominating among other tested variables. The Langmuir isotherm (R2 = 0.995) best fitted the equilibrium adsorption data with an adsorption capacity of 40.7 mg/g at 323 K and pseudo-second-order model (R2 = 0.983) best elucidated the rate of dye removal (10.6 mg/g). The underlying mechanism of adsorption was investigated by Weber-Morris and Boyd models and results revealed that the film diffusion governed the overall adsorption process. The theoretical investigations on the dye structure using DFT-based chemical reactivity descriptors indicated that malachite green cations are electrophilic, reactive and possess the ability to accept electrons, and are strongly adsorbed on the surface of diatom biosilica. Also, the Fukui function analysis proposed the favorable adsorption sites available on the adsorbent surface.

Integrated insights into the structure, spectroscopy, and reactivity of a novel Brucinium Tetraphenylborate: A comprehensive computational and experimental study

The current study examines the crystal development and structure of a recently synthesized 2,3-dimethoxystrychnidin-10-one (brucine) tetraphenylborate, using both experimental and theoretical examinations. Brucinium tetraphenylborate crystal (1) was successfully synthesized and characterized using Single Crystal X-ray Diffraction. The crystal lattice is intricately defined by prevailing N/C-H···O hydrogen bonds and O/C-H···π interactions, establishing a cohesive molecular network. To elucidate intermolecular interactions within the crystal packing, Hirshfeld surface analysis and 2D fingerprint plots are employed. Validation of experimental findings is conducted through rigorous Density Functional Theory (DFT) calculations employing the B3LYP and CAM-B3LYP functionals, in conjunction with the 6–311+G* basis set. The reactivity profile of the title molecule is systematically explored through the analysis of frontier molecular orbitals (FMO), HOMO-LUMO energies, molecular electrostatic potential (MEP), and global chemical reactivity descriptors. Notably, computational insights reveal that the energy gap (Eg) and other chemical reactivity descriptors are intricately associated with both tetraphenylborate and brucine moieties. This emphasizes their pivotal roles in the overall activity and antioxidant capacity of the molecule. This research contributes to the understanding of the intricate molecular dynamics, shedding light on key factors influencing the compound's reactivity and potential antioxidant properties.

Molecular structural, vibrational spectra, dual descriptor, electronic transition and biological evaluations of ethyl 4‑hydroxy-3-methoxycinnamate using density functional theory

Quantum chemical, spectroscopic and bioactivity studies of pharmacologically active Ethyl 4‑hydroxy 3‑methoxy ethyl cinnamate (EHMC) were investigated. By optimizing the geometric structural parameters, it was theoretically possible to obtain the FTIR &UV–Vis absorbance of the EHMC in both protic and aprotic solvents. PED values were computed, and vibrational assignments were identified. The TD-DFT approach and the IEFPCM model were used for simulating the UV spectra of the EHMC chemical. This study presents a comprehensive analysis of molecular parameters, including topological features of electron density, Reduced density gradient (RDG), NBO hyperconjugative interaction energies, frontier molecular energies (FMO) energies, and chemical reactivity descriptors across various solvents. MEP distinguishes between nucleophilic & electrophilic locations and determines a molecule's 3D charge distribution. Electrophilic and nucleophilic strength inside a molecule explained by Fukui function and Mullikan's charge. Furthermore, drug likeness and ADMET analysis were conducted to ascertain the biological characteristics and molecular docking investigation was also performed to explore the biological function of the title substance.

Synthesize, structural inspection, stoichiometry in solution and DFT calculation of some novel mixed ligand complexes: DNA binding, biomedical applications and molecular docking approach

Mixed ligand chelates of Pd(II), Cu(II), VO(II), and Ag(I) with (BIP = 4,6-dimethyl-N-(octahydro-2H-benzimidazol-2-ylidene)pyrimidin-2-amine) as a main ligand and (Phen = 1, 10-phenanthroline) as a second ligand were synthesized. The recently prepared chelates were investigated through CHN analysis, (NMR, Ft-IR, Mass, and UV–Vis) spectra, magnetic moments, molar conductance, TGA, Job s methods and DFT study. The (CHN and Mass) analysis, result expose the formation of structures (1 M: 1BIP: 1Phen) chelates. The two studied ligands are established to perform in as a neutral bi-dentate approach, concluded four N2 atoms for two ligands. The study of the molar conductance indicated the non-electrolytic features for (Cu(II) and VO(II)) chelates and the electrolytic features for (Ag(I) and Pd(II)) chelates. Thermo-dynamic and Kinetics factors for various thermal degradation phases were calculated. B3LYP/LANL2DZ/6–311 g(d,p) theoretical study has been applied for estimating the MEP, FMO analysis and quantum chemical reactivity descriptors of studied molecules. Practical and computational detail reveals that BIPPCu and BIPPVO complexes possess octahedral geometry around the metal center, BIPPAg complex shows a tetrahedral configuration, and BIPPPd complex has distorted square planar geometry. In vitro anti-microbial and anti-cancer for the studied structures were applied against various strains of microbes and cancer cell lines. The results revealed that all tested chelates showed a higher activity than the free BIP. The tested complexes have been studied to antioxidant potential using DPPH study. The binding of tested chelates with DNA was studied through applying electronic absorption, gel electrophoresis as well as viscosity study, in addition to the intercalating, minor groove and electrostatic approach of DNA interacting were recommended. The studied compounds explained dynamic satisfying performing. Also, the crystal structures of DNA (PDB ID: 454D), human coronavirus Nl63 nucleocapsid protein (PDB ID: 5EPW), breast cancer protein (PDB ID: 3HB5), and Escherichia coli (PDB ID: 2VF5) was performed by molecular docking simulation. Data of docking simulation suggestions are which tested compounds have biological behavior as well as have obvious benefit in the pharmaceutical business.

Chalcone-based novel mono and bisthiocarbohydrazone: synthesis, crystal structure, antioxidant property and theoretical evaluation

This study describes the synthesis of novel chalconethiocarbohydrazones derived from 2′-hydroxychalcone and thiocarbohydrazide as potential drugs. The monothiocarbohydrazone (M1) and bisthiocarbohydrazone (M2) compounds were obtained by condensing thiocarbohydrazide with 2′-hydroxychalcone [1-(2-hydroxyphenyl)−3-phenyl-2-propen-1-one] at 1/1 and 1/2 mol ratios. The synthesized compounds were characterized by elemental analysis, 1H NMR, FT-IR and UV-Vis spectroscopic techniques. The crystal structures of M1 and M2 were solved using single crystal X-ray diffraction method. The total antioxidant capacities of synthesized thiocarbohydrazones were determined by Cupric Reducing Antioxidant Capacity (CUPRAC) method. It was investigated also the radical scavenging activities of these compounds with 2,2-Diphenyl-1-picrylhydrazyl (DPPH) method. When compared to standard compound Trolox, both of the compounds showed good antioxidant activity. For the new compounds, Conceptual Density Functional Theory (CDFT) computations were performed to compute important quantum chemical reactivity descriptors. The chemical reactivities of the studied chemical systems were compared via well-known electronic structure rules of CDFT. Experimentally determined antioxidant activities of the synthesized compounds were supported with Molecular Docking analyses.