Chemical Industry Research Articles

An investigative study on the effective utilization of process hazard analysis (PHA) and safety instrumentation system (SIS) in chemical process industries

AbstractThis research paper focuses on effectiveness of process hazard analysis (PHA) and safety instrumented systems (SIS) interventions during process design and implementation which prevents accident and loss in chemical process industries. An initial preview was conducted to analyze the accidents and incidents in case of industrial and chemical process industries which enabled to define the research question in a scientific way. The research was conducted using a survey questionnaire developed with the help of focus group and was based on theoretical and conceptual framework developed for the study. The survey received responses from 36 participants who met the inclusion and exclusion criteria. The validity and reliability were established using confirmatory factor analysis, convergent validity, and Cronbach’s Alpha. The data analysis methods were used to answer the research questions to test the hypotheses. From the results it is observed that PHA and SIS were in an agreeable range. However, the performance factors grouped based on barrier controls and organizational behavior were have moderate positive relationship. This showed there exists a gap in the PHA and SIS contributing factors which may directly or indirectly cause industrial accidents in the chemical process industries.

Linalool fumigation improves mating competitiveness of males for population suppression of the global fruit pest Cydia pomonella

AbstractBACKGROUNDThe implementation of sterile insect technique (SIT) has proven effective in the area‐wide suppression of several significant agricultural and sanitary pests by using traditional cobalt‐60 (60Co‐γ) as a radiation source. Recently, X‐ray has been validated as a feasible alternative to 60Co‐γ radiation sources. Nonetheless, higher doses of X‐ray irradiation led to insect sterility but diminish mating competitiveness, thereby impacting the effectiveness of SIT applications.RESULTSIn this study, we assessed the impact of various X‐ray irradiation doses (ranging from 0 to 366 Gy) on the fecundity, fertility, and mating competitiveness of Cydia pomonella, a globally invasive fruit pest. Results demonstrated that the sterility rate of irradiated males increased with dose up to 200 Gy, then stabilized. Exposure to 200 Gy reduced male mating competitiveness, with competitiveness index (CI) values of 0.17 in the laboratory and 0.096 in the orchard. This decline is likely linked to the decreased expression of genes associated with sex pheromones recognition, such as CpomOR3a, CpomOR3b, and CpomOR5, post‐irradiation. Fumigation of linalool at varying concentrations (70, 83, and 96 μL/m3) enhanced mating competitiveness of males, particularly at moderate levels, possibly by restoring pheromones recognition. Implementation of repeated releases of sterilized males on a pilot scale led to a notable reduction in the population of C. pomonella in the field.CONCLUSIONThese findings indicate that fumigation with plant volatiles has the potential to mitigate male sterility induced by X‐ray irradiation, offering a promising approach to enhance the efficacy of SIT applications for the control of C. pomonella. © 2024 Society of Chemical Industry.

Data‐driven framework for predicting the sorption capacity of carbon dioxide and methane in tight reservoirs

AbstractAs energy demand continues to rise and conventional fuel sources dwindle, there is growing emphasis on previously overlooked reservoirs, such as tight reservoirs. Shale and coal formations have emerged as highly attractive options due to their substantial contributions to global gas reserves. Enhanced shale gas recovery (ESGR) and enhanced coalbed methane recovery (ECBM) based on gas injection are advanced techniques used to increase the extraction of gas from shale and coal formations. One of the key challenges associated with these formations and their enhanced recovery methods is accurately predicting the sorption process and its profile. This is crucial because it affects how methane (CH4) and carbon dioxide (CO2) are stored and released from the rock, and it significantly impacts the evaluation of gas content and the potential productivity of these formations. Due to the high cost of experimental procedures and the moderate accuracy of existing predictive approaches, this study proposes various cheap and consistent data‐driven schemes for predicting the sorption of CH4 and CO2 in shale and coal formations. In this regard, three intelligent models, including generalized regression neural network (GRNN), radial basis function neural network (RBFNN), and categorical boosting (CatBoost), were taught and tested using more than 3800 real measurements of CH4 and CO2 sorption in shale and coal formations. To find automatically their appropriate control parameters and improve their prediction ability, RBFNN and CatBoost were evolved using grey wolf optimization (GWO). The obtained results exhibited the encouraging prediction capabilities of the suggested models. In addition, it was found that CatBoost‐GWO is the most accurate scheme with total root mean square (RMSE) and determination coefficient (R2) of 0.1229 and 0.9993 for CO2 sorption, and 0.0681 and 0.9970 for CH4 sorption, respectively. Additionally, this approach demonstrated its physical validity by respecting the real sorption tendencies with respect to operational parameters. Furthermore, the CatBoost‐GWO model outperforms recently published machine learning approaches. Lastly, the findings of this study offer a significant contribution by demonstrating that the suggested model can greatly improve the ease of estimating CO2 and CH4 sorption in tight formations, thereby facilitating the simulation of other parameters related to this process. © 2024 Society of Chemical Industry and John Wiley & Sons, Ltd.

Light‐Promoted Extraction of Precious Metals Using a Porphyrin‐Integrated One‐Dimensional Covalent Organic Framework

AbstractPrecious metals are valuable materials for the chemical industry, but they are scarce and pose a risk of supply disruption. Recycling precious metals from waste is a promising strategy, here we tactfully utilize light irradiation as an environmental‐friendly and energy‐saving adjunctive strategy to promote the reduction of precious metal ions, thereby improving the adsorption capacity and kinetics. A newly light‐sensitive covalent organic framework (PP‐COF) was synthesized to illustrate the effectiveness and feasibility of this light auxiliary strategy. The equilibrium adsorption capacities of PP‐COF with light irradiation towards gold, platinum, and silver ions are 4729, 573, and 519 mg g−1, which are 3.3, 1.9, and 1.2 times the adsorption capacities under dark condition. Significantly, a filtration column with PP‐COF can recover more than 99.8 % of the gold ions in the simulated e‐waste leachates with light irradiation, and 1 gram of PP‐COF can recover gold from up to 0.15 tonne of e‐waste leachates. Interestingly, the captured precious metals by PP‐COF with light irradiation mainly exist in the micron‐sized particles, which can be easily separated by extraction. We believe this work can contribute to precious metal recovery and circular economy for recycling resources.

Light-Promoted Extraction of Precious Metals Using a Porphyrin-Integrated One-Dimensional Covalent Organic Framework.

Precious metals are valuable materials for the chemical industry, but they are scarce and pose a risk of supply disruption. Recycling precious metals from waste is a promising strategy, here we tactfully utilize light irradiation as an environmental-friendly and energy-saving adjunctive strategy to promote the reduction of precious metal ions, thereby improving the adsorption capacity and kinetics. A newly light-sensitive covalent organic framework (PP-COF) was synthesized to illustrate the effectiveness and feasibility of this light auxiliary strategy. The equilibrium adsorption capacities of PP-COF with light irradiation towards gold, platinum, and silver ions are 4729, 573, and 519 mg g-1, which are 3.3, 1.9, and 1.2 times the adsorption capacities under dark condition. Significantly, a filtration column with PP-COF can recover more than 99.8 % of the gold ions in the simulated e-waste leachates with light irradiation, and 1 gram of PP-COF can recover gold from up to 0.15 tonne of e-waste leachates. Interestingly, the captured precious metals by PP-COF with light irradiation mainly exist in the micron-sized particles, which can be easily separated by extraction. We believe this work can contribute to precious metal recovery and circular economy for recycling resources.

Enhancing Supply Chain Efficiency with Predictive Analytics: A Machine Learning Approach to Dynamic Lead Time Prediction in a Chemical Industry

We develop and employ a four-step methodological approach for predicting the lead time delays in all echelons of a supply chain (SC). The first step of the methodological approach involves a critical synthesis of academic research efforts for identifying the main sources of delays in all echelons of a supply chain. The second step involves the development of questionnaires for validating the findings of the research through workshops with industry stakeholders. The third step involves the development of a suite of machine learning (ML) models, namely, Random Forest Regression, Decision Tree Regression, and Linear Regression. These models were selected based on their prevalence in the recent literature and their ability to handle linear and nonlinear relationships between multiple variables. The final fourth step involves the implementation of the suite of machine learning models in the real case of a Hellenic chemical manufacturing supply chain. The implementation results reveal that Random Forest Regression exhibits the highest predictive accuracy throughout all stages of the supply chain, achieving the lowest Mean Absolute Percentage Errors (MAPE), ranging from 0.5 to 7% in the examined supply chain echelons.

Macrocyclic Chiral Two‐Dimensional Membranes for Enantiomers Separation

AbstractChiral enantiomers, while typically exhibiting similar physical and chemical properties, often have distinct therapeutic effects. The preparation of pure enantiomers is therefore of significant interest in the food, chemical, and pharmaceutical industries, making the separation of enantiomers highly sought after. Membrane separation technology has garnered widespread attention for its environmental friendliness and scalability. Recently, chiral two‐dimensional (2D) membranes have demonstrated superior separation performance due to their ultrathin nature and orderly transmission channels. Macrocyclic chiral 2D membranes, in particular, combine the inherent cavity structure of macrocyclic molecules with the host‐guest interaction capabilities that specifically recognize chiral molecules. Additionally, they benefit from the excellent chemical stability and adjustable interlayer spacing of 2D materials. This combination allows these membranes to achieve high enantioselectivity while improving flux. By optimizing the trade‐off between flux and enantioselectivity, this strategy offers a promising new approach for developing advanced chiral membranes.

Double-crosslinked hydrogels and hydrogel beads formed by garlic protein hydrolysates for bioactive encapsulation and gastrointestinal delivery.

Garlic protein is one of the main components of garlic. It has several beneficial characteristics. This study aimed to characterize a double crosslinked hydrogel formed with alginate, calcium ions (Ca2+), and garlic protein hydrolysates (GPH), and to develop hydrogel beads for targeted delivery of bioactive constituents to the gastrointestinal tract. The results indicated that the degree of GPH hydrolysis was approximately 3% following trypsin treatment. The inner structure of the double crosslinked hydrogel showed a honeycomb pattern, with solid-like gel rheology and improved texture properties at a 4% (w/v) GPH concentration. The GPH-based hydrogel beads demonstrated pH sensitivity, swelling in near-neutral and alkaline environments, and the encapsulated paclitaxel (PTX) exhibited an amorphous phase with preferential release in intestinal conditions. The GPH group also achieved greater drug encapsulation efficiency than a soy protein hydrolysate (SPH) group, and proteomic analysis suggested that lower molecular weight and peptide charge favored the formation of peptide-integrated double crosslinking hydrogels. This work indicated that GPH was helpful and could inspire the development of drug delivery systems involving GPH with the required mechanical strength and target-release properties. © 2024 Society of Chemical Industry.

Evaluation of flavor characteristics in Chinese wheat flour paste using electronic-nose, electronic-tongue, and headspace-gas chromatography-ion mobility spectrometry at different fermentation stages.

Wheat flour paste is a typical Chinese fermented food, valued for its distinct flavors and health benefits. However, evidence regarding volatile organic compounds (VOCs) in Chinese wheat flour paste is limited. This study aims to examine the effect of fermentation on the VOCs and their physicochemical properties. Chinese wheat flour paste fermented at different stages was characterized using headspace gas chromatography ion-mobility spectrometry (HS-GC-IMS) with an electronic nose (E-nose) and an electronic tongue (E-tongue). The results revealed that around 76 VOCs were found in Chinese wheat flour paste from all stages of fermentation. These included esters, alcohols, aldehydes, ketones, acids, furans, and pyrazines. The E-tongue and E-nose analyses also showed high responses for saltiness, umami, WIW, and W5S. The fermentation process changed the color of the wheat flour paste, and the taste, and smell parameters. Principal component analysis (PCA) showed that taste parameters were positively associated with the volatile flavor profile detected in wheat flour paste. Partial least squares discriminant analysis also identified 28 VOCs as distinct flavor metabolites across fermentation stages. At the 'after ripening' (AR) and 'sterilization' (S) stages of wheat flour paste fermentation there were strong umami and salty flavors, with minimal sour and sweet notes in comparison with the other stages. These stages were characterized by elevated terpene concentrations, inorganic sulfides, and key flavor enhancers such as 2-hexanol and propyl sulfide. Headspace gas chromatography ion-mobility spectrometry and E-nose technologies are recommended for a more precise assessment of volatile changes during fermentation. The findings indicate that the 'sterilization' stage of wheat flour paste fermentation is optimal for achieving the required flavor profile. © 2024 Society of Chemical Industry.

Addition of polyphenolic extracts of Myrtus communis and Arbutus unedo fruits to whey: valorization of a common dairy waste product as a functional food.

Whey, a nutrient-rich byproduct of the dairy sector, possesses high potential for creating novel nutraceutical products. The present study investigates a potential new functional food by incorporating polyphenolic extracts from Myrtus communis and Arbutus unedo fruits into whey in both liquid (LA) and powder (PA) addition forms. Chemical, microbiological, physical stability and antioxidant activity were monitored for 60 days (from T0 to T60). Both LA and PA of fruit extracts remained chemically stable for the whole period, except for A. unedo PA, which showed a decline in polyphenols after T45. Enriched whey samples showed higher antioxidant activity than pure whey. Microbiological analysis revealed the presence of lactic acid bacteria, indicating potential prebiotic effects. However, the high tannin concentration of A. unedo extracts partially modified the casein micelle structure. Whey enriched with Mediterranean fruit extracts shows great potential as a functional food, combining the benefits of plant antioxidants, probiotic bacteria and good stability. © 2024 The Author(s). Journal of the Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Optimizing Propylene/Propane Sieving Separation through Gate-Pressure Control within a Flexible Organic Framework.

The separation of propylene (C3H6) and propane (C3H8) is of great significance in the chemical industry, which poses a challenge due to their almost identical kinetic diameters and similar physical properties. In this work, we synthesized an ultramicroporous flexible hydrogen-bonded organic framework (named HOF-FJU-106) by using molecule 2,3,6,7-tetra(4-cyanophenyl)tetrathiafulvalene (TTF-4CN). The formation of the dimer causes the TTF-4CN molecular to bend and weaken π-stacked interactions, coupled with the flexibility of C≡N···H-C hydrogen bonds, which leads to reversible conversion between open and closed frameworks through the mutual slip of adjacent layers/columns under activation and stimulation of gas molecules. Through gas adsorption isotherms and adsorption enthalpy, HOF-FJU-106a exhibited adaptive adsorption and stronger binding affinity for C3H6, and presented a recorded gas uptake ratio of C3H6/C3H8 (23.77) among presentative HOF materials at room temperature to date. Importantly, the flexible HOF-FJU-106a shows an interesting phenomenon about the reversible gate pressure control under variable temperature, which realized the gas adsorption and separation performance enhancement for the binary C3H6/C3H8 mixtures. This strategy through designing HOFs with thermoregulatory gating effect is a powerful way to maximize the performance of materials.

Corrosion inhibition performance of expired amlodipine on cupronickel alloy in a neutral chloride environment: electrochemical and surface analysis

Purpose The corrosion of cupronickel and copper alloys in marine and chloride environments presents significant challenges in the chemical and petrochemical industries. This paper aims to investigate the corrosion inhibition of cupronickel alloy (Cu-10Ni) in a sodium chloride medium using expired amlodipine as a corrosion inhibitor. The use of this drug in its expired form could reduce the costs of corrosion and help mitigate the accumulation of pharmaceutical waste. Design/methodology/approach The inhibitory action was evaluated using a weight loss method, potentiodynamic polarization, electrochemical impedance spectroscopy measurements, scanning electron microscopy (SEM) and atomic force microscopy (AFM). The effect of temperature on the inhibition performance was also studied. Findings The results of these experiments demonstrated that the drug amlodipine effectively inhibited the corrosion of cupronickel alloy in chloride solutions. The corrosion rate of cupronickel was found to decrease with increasing inhibitor concentration and to increase with rising temperature. A maximum inhibition efficiency of 91.92 was achieved with an inhibitor concentration of 0.025 g/L at 298 K. Adsorption of the inhibitor followed the Langmuir adsorption isotherm. Polarization studies indicated that the expired drug acted as a mixed inhibitor. SEM and AFM analyses confirmed that the surface morphology of cupronickel specimens was significantly improved in the presence of the inhibitor. Practical implications Amlodipine can be conveniently used to mitigate problems with the corrosion of copper alloys in chloride environments. Originality/value Amlodipine is evaluated as a novel and effective corrosion inhibitor for cupronickel alloy in neutral chloride environments.

Sustainable synthesis of fine chemicals and polymers using industrial chlorine chemistry.

To achieve sustainable resource circulation, preparation of reactive species from stable compounds is unavoidable. Chlorine chemistry is an eco-friendly methodology to address this demand. Chlorine is industrially produced from sodium chloride (NaCl), an abundant natural resource in oceans. Chlorine provides various chemical products, including polymers, through chlorination and subsequent conversion reactions. In these reactions, the byproducts are usually hydrogen chloride, which is commercially utilized as hydrochloric acid and is finally neutralized to NaCl after use. Therefore, chlorine chemistry enables fine chemical production from NaCl with almost no wastage. This review provides an overview of the synthesis of fine chemicals and polymers using chlorine chemistry and discusses them from the perspective of sustainability.

Cry1 resistance in a CRISPR/Cas9-mediated HaCad1 gene knockout strain of the Australian cotton bollworm Helicoverpa armigera conferta (Lepidoptera: Noctuidae).

Helicoverpa armigera is a highly polyphagous species that causes huge losses to agricultural and horticultural crops worldwide. In the cotton industry, H. armigera, including the Australian subspecies Helicoverpa armigera conferta, is largely managed using genetically modified crops that express insecticidal toxins, such as Cry1Ac. Resistance to Cry1 proteins occurs and, in some cases, is mediated by changes to HaCad1, a gene that encodes the midgut protein cadherin. Around the world, numerous resistance-associated polymorphisms have been identified in the HaCad1 gene of H. armigera, but Cry1Ac resistance is rare in the Australian subspecies. We used CRISPR/Cas9 to disrupt the cadherin gene in H. armigera conferta and characterised the resulting phenotype with bioassays and transcriptomics. Compared to the parental strain, the newly generated HaCad1 knockout strain is 44-fold and 16-fold more resistant to Cry1Ac and Cry1A.105, respectively, while wild-type and knockout insects were equally insensitive to Cry1F. The disruption of the HaCad1 gene causes Cry1Ac resistance in Australian H. armigera conferta. However, Cry1Ac resistance remains rare in Australian field populations suggesting that Australia's approach to pest management in cotton has prevented widespread Cry1Ac resistance. © 2024 CSIRO. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Quantitative trait locus mapping and OsFLOq12 identification for rice grain hardness: towards improved rice flour for wheat substitution.

Recent shifts in consumer dietary preferences have led to a significant decline in rice consumption in Korea, resulting in surplus rice production. To address this issue, rice flour has been proposed as a substitute for wheat flour. However, the physical, chemical and structural differences between rice and wheat, particularly in grain hardness, pose challenges in using rice flour as an alternative. Understanding the genetic factors that influence rice grain hardness is crucial for improving the milling process and producing high-quality rice flour suitable for wheat flour substitution. In this study, various grain traits, including length, width, thickness, length-to-width ratio and hardness, were measured in a population of brown and milled rice. Quantitative trait locus (QTL) analysis revealed a significant association between grain hardness and thickness, with QTLs for grain hardness mapped on chromosomes 1 and 12 for brown and milled rice, respectively. A total of 20 candidate genes related to grain hardness were identified through QTL analysis. Among them, OsFLOq12 (LOC_Os12g43550) was identified as a key gene influencing grain hardness, which encodes a Ras small GTPase. Phenotypic analysis showed differences in endosperm appearance and particle size between lines with low and high grain hardness. The genetic analysis of OsFLOq12 revealed a single nucleotide polymorphism associated with grain hardness. This study provides valuable insights into the genetic background of grain hardness, offering a foundation for breeding rice varieties optimized for flour production as a viable substitute for wheat flour. © 2024 Society of Chemical Industry.

Sequential fermentation of Ginkgo biloba seeds by Bacillus subtilis natto and Lactobacillus plantarum enhanced nutrition, flavor and lipid-lowering activity.

Ginkgo biloba seeds (GBS) are rich in flavonoids, proteins and reducing sugar, and have been consumed as food and medicinal nuts for thousands of years. However, the presence of ginkgotoxins and their poor palatability limit people's consumption of them. This study used solid-state fermentation with Bacillus subtilis natto and Lactobacillus plantarum to enhance the safety and benefits of GBS. Optimized fermentation conditions increased the content of beneficial components like total flavonoids, soluble protein and reducing sugar while eliminating unpleasant odors (isoamyl aldehyde and hexanal) and reducing the toxin 4'-O-methylpyridoxine by 91.17%. Fermentation of GBS powder can significantly enhance its anti-inflammatory and antioxidant activities in vitro (P < 0.001). Furthermore, it exhibits a dose-dependent effect within a certain concentration range. Mixed fermentation (FBnLp) was evaluated for its effects on obesity and metabolic syndrome in mice fed a high-fat diet. FBnLp significantly reduced body and liver weight gain, prevented dyslipidemia and decreased inflammatory and oxidative stress compared to unfermented GBS. Histological analysis showed that FBnLp improved liver health by reducing fat accumulation and preventing non-alcoholic fatty liver disease. Meanwhile, it was found that feeding FBnLp increased the expression of CPT-1α, which regulates energy expenditure and fat breakdown, and downregulated the expression of SREBP-1c, FAS and ACC, which regulate fat synthesis. This research provides new insights and technological support for the application and development of FBnLp as a functional product, addressing key issues in its use and industry growth. © 2024 Society of Chemical Industry.

Combination of atmospheric and room temperature plasma and ribosome engineering techniques to enhance the antifungal activity of Bacillus megaterium L2 against Sclerotium rolfsii.

Sclerotium rolfsii is an extremely destructive phytopathogenic fungus that causes significant economic losses. Biocontrol strategies utilizing antagonistic microorganisms present a promising alternative for controlling plant pathogens. Bacillus megaterium L2 has been identified as a potential microbial biocontrol agent in our previous study; however, its efficacy in controlling pathogens has yet to meet current demands. This study aims to enhance the antifungal activity of strain L2 against S. rolfsii R-67 through a two-round mutagenesis strategy and to preliminarily investigate the mutagenesis mechanism of the high antifungal activity mutant. We obtained mutant Dr-77 with the strongest antifungal activity against R-67, and its cell-free supernatant significantly reduced the infection potential of R-67 to Amorphophallus konjac corms, which may be attributed to the antimicrobial compound phenylacetic acid (PAA), and PAA content in Dr-77 (5.78 mg/mL) was 28.90 times higher than original strain L2. This compound exhibited strong antifungal ability against R-67, with a half maximal effective concentration (EC50) value of 0.475 mg/mL, significantly inhibiting mycelial growth and destroying the ultrastructure of R-67 at EC50 value. Notably, PAA also exhibited broad-spectrum antifungal activity against six phytopathogens at EC50 value. Moreover, genome analysis revealed nine different gene mutations, including those involved in PAA biosynthesis, and the activities of prephenate dehydratase (PheA) and phenylacetaldehyde dehydrogenase (ALDH) in PAA biosynthesis pathway were significantly increased. These results suggest that the elevated PAA content is a primary factor contributing to the enhanced antifungal activity of Dr-77, and that this mutagenesis strategy offers valuable guidance for the breeding of functional microbial resources. © 2024 Society of Chemical Industry.

Effect of intercropping apple trees with basil (Ocimum basilicum) or French marigold (Tagetes patula) on the rosy apple aphid regulation (Dysaphis plantaginea) and the abundance of its natural enemies.

In a global context of pesticide reduction, the sustainable management of aphids is a major challenge in maintaining economically viable fruit production. Intercropping with companion plants (CPs) that emit volatile organic compounds (VOCs) with repellent or attractive properties could be successful in the laboratory. Still, their effects on the orchard have been little documented. We tested in 2018 and 2019 the hypotheses that the introduction of basil or French marigold, decreases the populations of Dysaphis plantaginea Passerini, the rosy apple aphid (RAA) and increases the abundance of its natural enemies (NEs) in an apple orchard in the south of France. Laboratory tests confirmed that both CPs altered RAA reproduction performance. In orchards, they attracted more NEs around the pots and at some dates in the aphid colonies near the pots in both years (apart from basil in 2019), without a significant reduction in aphid populations in 2018. In contrast, in 2019, the number and spatial expansion of aphid colonies were significantly lower, close to basil. Further investigation is needed to disentangle the mechanisms explaining the observed effects (e.g., repellent action in autumn, etc.) but the results highlight the potential of CPs to control aphids in orchards and contribute to agroecological production of apple. Thus, this study shows the potential of CPs in a strategy combining aphid repellency and NEs attraction to control aphids in orchards, provided that CP installation lasts over several consecutive years. © 2024 Society of Chemical Industry.

Determining the optimal time window to detect emerald ash borer damage for effective management.

The emerald ash borer (EAB) is an invasive pest of global concern. Accurate detection of EAB is crucial for effective management. Traditional field surveys fail to meet large-scale monitoring requirements. Remote sensing methods offer a potential solution, but the phenological decline of ash trees may obscure the remote sensing features for detecting EAB. Therefore, determining the timing of leaf abscission caused by EAB before phenology is crucial for effective detection. We collected time-series data of Leaf Area Index (LAI), leaf sizes, and hyperspectral images of damaged ash trees throughout the growing season to determine the optimal detecting time window for EAB detection using field surveys or remote sensing techniques. Significant differences in LAI and leaf size were observed throughout the growing season among ash trees with different EAB infestation degrees, providing a basis for small-scale field surveys. However, in May and June, the hyperspectral reflectance showed no variation. The difference began to appear in July and became apparent from August to October. By October, severely EAB-infested ash trees had almost completely defoliated. Machine learning classification results showed that accuracies after July were higher than before July. After July, the highest classification accuracy reached 100%, while the highest accuracy before July was only 88.57%. Selecting the optimal monitoring time significantly enhanced detection accuracy. The optimal period for field surveys is from May to November, whereas for remote sensing it is from August to October. Identifying the optimal months enables us to achieve more efficient decision-making and management. © 2024 Society of Chemical Industry.

Incipient resistance of the African maize stemborer, Busseola fusca (Lepidoptera: Noctuidae) to Cry2Ab2 maize in South Africa.

Resistance of Busseola fusca (Lepidoptera: Noctuidae) to Cry1Ab was documented in 2006, 7 years after the first cultivation of MON 810 in South Africa. This was mitigated by introducing a second-generation Bacillus thuringiensis (Bt) maize (MON 89034), which contains the Cry1A.105 and Cry2Ab2 proteins. The first reports of B. fusca infestations of MON 89034 maize came in the KwaZulu-Natal province (2017-2018 cropping season), followed by reports in the Mpumalanga province (2022-2023 season). Here we report results of artificial diet- and plant-based laboratory assays to assess the susceptibility of B. fusca populations to the Bt proteins in MON 89034. Larvae were sampled from nine locations which included three where greater than expected injury due to B. fusca had been reported to MON 89034. Larval mortality in assays with diet-incorporated Cry2Ab2 protein was 100% for all except the three problem populations, showing that the Cry2Ab2 protein in MON 89034 is highly efficacious against B. fusca. In contrast, assays with Cry1A.105 did not cause significant mortality in any of the B. fusca populations including larvae from a susceptible reference. Larval survival on leaf tissue of MON 89034 maize after 7 days ranged between 75% and 91% for the three problematic B. fusca populations, compared to 0.4% to 9.6% for the five other populations. Therefore, MON 89034 is effectively a single-mode-of-action technology against B. fusca and carries an inherent high risk for the evolution of resistance. This study shows that the three B. fusca populations collected from locations with greater than expected damage to MON 89034 have resistance to the Cry2Ab2 protein and therefore to MON 89034 maize. This research emphasizes the importance of resistance monitoring and implementation of effective insect resistance management tactics. © 2024 The Author(s). Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.