Chemical Composition Research Articles

Appraisal of chemical composition and biological activities of thyme essential oil: an insight to in-silico molecular docking studies

The current study aims to ascertain the chemical composition and biological activities of thyme leaves essential oil (TEO), with an emphasis on its in silico molecular docking studies targeting the antibacterial properties of its constituents. TEO was extracted from dried leaves using a standardized procedure, with a yield of 0.75%. The chemical constituents of TEO were identified using Gas Chromatography-Mass Spectrometry (GC-MS). The primary compounds detected included carvacrol, o-acetyl thymol, α-pinene, and spathulenol. Subsequently, the antioxidant activity of the isolated oil was measured, and the results showed that the total phenolic contents (TPC) was 4.69 ± 0.17 GAE mg/100 g, the total flavonoid contents (TFC) was 1.45 ± 0.04 CE mg/100 g, the ferric reducing antioxidant potential (FRAP) ranged from 0.07-0.81, and the DPPH radical scavenging activity was 42.88-86.94%. TEO exhibited notable antibacterial activity against certain strains of Staphylococcus aureus and Escherichia coli. The molecular docking studies were then conducted to further investigate the interaction of TEO’s potent metabolites with key bacterial enzymes, identifying spathulenol and caryophyllene as the best-interacting ligands. Hemolytic activity tests of TEO indicated negligible cytotoxic effects. These findings support that TEO holds great potential for the development of functional food and nutra-pharmaceuticals.

Chemical Evolution of R-process Elements in Stars (CERES). II. The impact of stellar evolution and rotation on light and heavy elements

Carbon, nitrogen, and oxygen are the most abundant elements throughout the universe, after hydrogen and helium. Studying these elements in low-metallicity stars can provide crucial information on the chemical composition in the early Galaxy and possible internal mixing processes that can alter the surface composition of the stars. This work aims to investigate the chemical abundance patterns for CNO elements and Li in a homogeneously analyzed sample of 52 metal-poor halo giant stars. From these results, we have been able to determine whether internal mixing processes have taken place in these stars. We used high-resolution spectra with a high signal-to-noise ratio (S/N) to carry out a spectral synthesis to derive detailed C, N, O, and Li abundances for a sample of stars with metallicities in the range of$-$3.58 leq Fe/H leq $-$1.79\,dex. Our study was based on the assumption of one-dimensional (1D) local thermodynamic equilibrium (LTE) atmospheres. Based on carbon and nitrogen abundances, we investigated the deep mixing taking place within stars along the red giant branch (RGB). The individual abundances of carbon decrease towards the upper RGB while nitrogen shows an increasing trend, indicating that carbon has been converted into nitrogen. No signatures of ON-cycle processed material were found for the stars in our sample. We computed a set of galactic chemical evolution (GCE) models, implementing different sets of massive star yields, both with and without including the effects of stellar rotation on nucleosynthesis. We confirm that stellar rotation is necessary to explain the highest N/Fe and N/O ratios observed in unmixed halo stars. The predicted level of N enhancement varies sensibly in dependence of the specific set of yields that are adopted. For stars with stellar parameters similar to those of our sample, heavy elements such as Sr, Y, and Zr appear to have unchanged abundances despite the stellar evolution mixing processes. The unmixed RGB stars provide very useful constraints on chemical evolution models of the Galaxy. As they are more luminous than unevolved (main sequence and turnoff) stars, they also allow for stars to be probed at greater distances. The stellar CN-cycle clearly changes the atmospheric abundances of the lighter elements, but no changes were detected with respect to the heavy elements.

Mixed-mode coupling in the red clum. I. Standard single star models

The investigation of global, resonant oscillation modes in red giant stars offers valuable insights into their internal structures. In this study, we investigate in detail the information we can recover on the structural properties of core-helium burning (CHeB) stars by examining how the coupling between gravity- and pressure-mode cavities depends on several stellar properties, including mass, chemical composition, and evolutionary state. Using the structure of models computed with the stellar evolution code we calculate the coupling coefficient implementing analytical expressions, which are appropriate for the strong coupling regime and the structure of the evanescent region in CHeB stars. Our analysis reveals a notable anti-correlation between the coupling coefficient and both the mass and metallicity of stars in the regime $M in agreement with data. We attribute this correlation primarily to variations in the density contrast between the stellar envelope and core. The strongest coupling is expected thus for red-horizontal branch stars, partially stripped stars, and stars in the higher-mass range exhibiting solar-like oscillations ($M While our investigation emphasises some limitations of current analytical expressions, it also presents promising avenues. The frequency dependence of the coupling coefficient emerges as a potential tool for reconstructing the detailed stratification of the evanescent region.

Chemical composition and antimicrobial investigation of the essential oil isolated from Montanoa bipinnatifida (Kunth) K. Koch leaves

Montanoa bipinnatifida is a perennial shrub belonging to family Asteraceae and geographically distributed in Mexico, Central America and Northern South America. This study aimed to investigate the chemical composition of the essential oil isolated from M. bipinnatifida leaves through GC-MS analysis accompanied by in-depth investigation of antimicrobial properties against wide arrays of microbial strains via agar diffusion method and disk diffusion method. The GC-MS analysis of the tested oil revealed presence of sixteen components (∼99.99%), predominated by germacrene D (37.22%), β-caryophyllene (30.73%), α-pinene (4.56%) and β-germacrene (4.48%). The undiluted oil exhibits varying levels of activity against different microbes. The leaf oil showed a significant inhibition against Proteus mirabilis, Staphylococcus aureus, Bacillus subtilis (both vegetative and spores), Mycobacterium phlei, and Candida albicans. However, its activity against Sarcina lutea, Escherichia coli, Klebsiella pneumoniae appears to be less pronounced. Thus, the leaf oil of M. bipinnatifida demonstrates broadspectrum antimicrobial activity and is recommended in the pharmaceutical industry to overcome the current problem related to the microbial resistance to antibiotics. Further experimental studies are warranted to investigate the underlying mechanism of action and the responsible individual components.

Photoluminescent and Electrochemiluminescent Detection of Fe3+ Using Cyclometalated Iridium Complexes via Fe3+-Catalyzed Hydrolysis.

Ferric ion (Fe3+) is a biologically abundant and important metal ion. We developed several cyclometalated iridium complex-based molecular sensors (1, ppy-1, 1-phen, 1a, and 1-OMe) for the detection of Fe3+ using an acetal moiety as the reaction site. The acetal moiety in iridium complexes undergoes Fe3+-catalyzed hydrolysis and subsequent formation of a formyl group, resulting in turn-off photoluminescent and electrochemiluminescent responses. Sensor 1 showed excellent selectivity toward Fe3+ over other biologically important metal ions. Furthermore, we compared the performance of the sensors based on the structural differences of the iridium complexes, and revealed a relationship between the structure and chemical properties through electrochemical experiments and computational calculations.

CHEMOUT: CHEMical complexity in star-forming regions of the OUTer Galaxy. IV. ALMA observations of organic species at a galactocentric radius of ~ 23 kpc

Single-dish observations suggest that the abundances of organic species in star-forming regions of the outer Galaxy, which are characterised by sub-solar metallicities, are comparable to those found in the local Galaxy. To understand this counter-intuitive result and avoid a misleading interpretation due to beam dilution effects at these large distances, spatially resolved molecular emission maps are needed to correctly link the measured abundances and local physical properties. We observed several organic molecules with the Atacama Large Millimeter Array towards WB89-671, the source with the largest galactocentric distance (23.4 kpc) of the project CHEMical complexity in star-forming regions of the OUTer Galaxy (CHEMOUT) at a resolution of $ 15000$ au. We compared the observed molecular abundances with chemical model predictions. We detected emission of C$_4$H HCO HCS$^+$, CS, HN13C, and SO. The emission morphology is complex, extended, and different in each tracer. In particular, the most intense emission in and arises from two millimeter-continuum infrared-bright cores. The most intense and SO emission predominantly arises from the part of the filament that lacks continuum sources. The narrow line widths across the filament indicate quiescent gas in spite of the two embedded protostars. The derived molecular column densities are comparable with those in local star-forming regions, and they suggest an anti-correlation between hydrocarbons, ions, HCO, and on the one hand, and and SO on the other. The static chemical models that match the observed column densities best favour low-energy conditions that are expected at large galactocentric radii, but they also favour carbon elemental abundances that exceed those derived by extrapolating the C/H galactocentric gradient at 23 kpc by three times. This would indicate a flatter C/H trend at large galactocentric radii, which is in line with a flat abundance of organics. However, to properly reproduce the chemical composition of each region, models should include dynamical evolution.

Tuning the Magnetocaloric and Structural Properties of La0.67Sr0.28Pr0.05Mn1-x Co x O3 Refrigeration Materials

Abstract The impact of the structural, magnetic, and magnetocaloric effect of perovskite manganites La0.67Sr0.28Pr0.05Mn1-x Co x O3 (x = 0.05, 0.075, and 0.10) is investigated. LSPMCO crystallizes as a rhombohedral structure with R-3c space groups. As the Co content increases, the cell volume expands, the Mn-O-Mn bond angle reduces, and the length of the Mn-O bond rises. The samples show irregular submicron particles under the Zeiss scanning electron microscopy. The particle size becomes larger with the amount of doping. The chemical composition of the samples is confirmed by X-ray photoelectron spectroscopy (XPS). The ferromagnetic (FM) to paramagnetic (PM) phase transition occurs near the Curie temperature (TC), and all transitions are second order phase transitions (SMOPT) characterized by minimal thermal and magnetic hysteresis. Critical behavior analysis indicates that the critical parameters of LSPMCO closely align with those predicted by the mean field model. The TC declines with Co doping and reaches near room temperature (302 K) at x = 0.075. The maximum magnetic entropy change (-Δ S M max) at x = 0.05 is 4.27(J/kg·K), and the relative cooling power (RCP) peaks at 310.81 J/K. Therefore, the system holds significant potential for development as a magnetic refrigeration material, meriting further professional and objective evaluation.

A Study on Metallurgical Artifacts Excavated from Luojiaba Site H235 in the Eastern Sichuan Region during the Eastern Han Dynasty

Currently, research remains limited on ironworking workshops in China and even throughout East Asia. The discovery of Luojiaba Site H235 in 2021 provides significant new material on this issue. This paper comprehensively organized the metallurgical artifacts and employed technological methods such as XRF and SEM-EDS to analyze the slag and hammerscale excavated from Luojiaba Site H235. First, the chemical composition and microstructural phases of the slag were analyzed, with an examination of the hammerscale. Second, the processes leading to the formation of slag and hammerscale are discussed. Third, based on the scale of the site, the chemical composition, and the characteristic shapes of the slag, combined with Serneels’ theoretical framework for quantitative analysis of forging slag, the slag unearthed from Luojiaba Site H235 was tentatively categorized as forging slag. This suggests that the workshop primarily produced or repaired iron objects through forging. Finally, considering the furnace shapes observed at contemporary sites and discussions on the potential sources of iron materials at the Luojiaba site, speculations are made regarding the furnace structure at the Luojiaba site and the possible origin of its iron materials. Unlike ironworking workshops at other contemporary sites, the location of the forging workshop at Luojiaba Site H235 presents a distinctly different choice, situated within a village or town during the Eastern Han Dynasty. This choice of location may reflect a phenomenon closer to consumer proximity. Therefore, analyzing metallurgical artifacts unearthed from Luojiaba contributes to understanding the operation of ironworking workshops and the distribution of resources in village-level settlements in the eastern Sichuan region during the Eastern Han Dynasty.

Effect of Sowing Dates and Flower Pruning on Chemical Properties and Shelf Life of Yam Bean (Pachyrrhizus erosus L.) Tubers

Underutilized crops provide essential micro-nutrient and thus able to complement staple foods. The inhibitory effect of floral and fruit development may affect the tuber development. It is logical to assume that large amounts of nitrogen and other essential components are assimilated by the reproductive parts of plant, hence it is important to remove these reproductive parts as well as time of sowing also affect the shelf life and chemical properties of yam bean tubers which form the basis of an experiment on effect of sowing dates and flower pruning on chemical properties and shelf life of Yam bean tubers. An experiment was conducted at Department of Vegetable Science, College of Horticulture, Dr. Balasaheb Sawant Konkan Krishi Vidyapeeth, Dapoli during the year 2023-24. Twelve treatments and 3 replications in Factorial Randomized Block Design Planting dates (D) i.e., D₁-1st week of June, D₂-3rd week of June, D3 -1st week of July, D4 -3rd week of July and Interval of reproductive pruning (P) i.e., P1 – Weekly, P2 – Fortnightly, P3 – No pruning. Chemical analysis of the tubers was done to analyse the starch, fiber, dry matter, TSS and shelf life of the tubers from various treatments. Investigation revealed that among the various chemical parameters and shelf life the effect of interaction on starch, fiber, dry matter and shelf life was significant whereas it was non-significant on TSS. The highest starch content was recorded in D3P1 (6.81%). The fiber content was analysed highest in D4P3 (0.69 %). The highest dry matter content was analysed in D1P3 (24.59 %). The highest TSS was recorded in D1P1 (6.40 °B) and highest shelf life was recorded in D1P1 (36.56 days). Considering its nutritional quality and sustainability in the region it can be an alternative crop with food security, nutritional security as well as economic sustainability [1].

Development of HEMA-Succinic Acid-PEG Bio-Based Monomers for High-Performance Hydrogels in Regenerative Medicine.

In recent years, hydrogels have found a special place in regenerative medicine for tissue repair, rehabilitation, and drug delivery. To be used in regenerative medicine, hydrogels must have desirable physical, chemical, and biological properties. In this study, a new biomonomer based on hydroxyethyl methacrylate-succinic acid-polyethylene glycol 200 (HEMA-Suc-PEG) was synthesized and characterized. Then, using the synthesized monomers and different ratios of polyethylene glycol diacrylate (PEGDA) as a crosslinker, biocompatible hydrogels were synthesized through thermal and UV curing methods. The mechanical, physical, chemical, and biological properties of the hydrogels and the behavior of endothelial cells, an essential component of the cardiovascular system, were evaluated. The results showed that the hydrogel synthesized with 0.2 g of PEGDA (UV curing) has desirable mechanical and physical properties. Biological tests showed that these hydrogels are not only nontoxic to cells but also enhance cell adhesion. Therefore, the hydrogel containing the synthesized monomer HEMA-Suc-PEG and 0.2 g of PEGDA has the potential to be used in the cardiovascular system.

Comparison of Three Different Extraction Methods on Schizonepeta tenuifolia (Benth.) Briq Essential Oil: Chemical Constituents and in Vitro and in Silico Biological Activities.

This study evaluated the effects of three extraction methods, hydrodistillation (HD), steam distillation (SD), and lipophilic solvent extraction (LSE), on the yield, chemical composition, and in vitro / in silico biological activities of Schizonepeta tenuifolia (Benth.) Briq essential oil (STEO). The highest yield of STEO was obtained by HD (0.750±0.040%), followed by SD (0.440±0.020%) and LSE (0.350±0.030%). Although their contents varied, menthone and pulegone predominated in HDEO, SDEO, and LSEO. HDEO displayed the strongest antioxidant ability, with a 2,2-diphenyl-1-picrylhydrazyl (DPPH) IC50 value of 14.164±0.090 mg/mL and 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonate) (ABTS) value of 0.326±0.023 mg/mL. SDEO demonstrated the highest antimicrobial activity against Staphylococcus aureus and Escherichia coli and HDEO the highest potent anti-inflammatory activity. The molecular docking of menthone and pulegone demonstrated strong binding to inflammatory targets, including prostaglandin-endoperoxide synthase 1 (PTGS1) and 2 (PTGS2) and tumor necrosis factor alpha (TNF-α). In short, the extraction method significantly affected the yield, composition, and biological activity of STEO.

Catalytic functionalization of MCM-41 and MCM-48 with copper by modified template ion-exchange method for low-temperature NH3-SCR process: the role of complexing agents for copper dispersion

AbstractMesoporous silicas of MCM-41 and MCM-48 types were synthesized and modified with copper by template ion-exchange (TIE) technique. A high dispersion of deposited copper species was managed by subsequent treatment of the samples with ammonia, urea, or acetonitrile solution. Copper-modified silicas were analysed in terms of their chemical composition (ICP-OES), ordering of porous structure (XRD), textural parameters (low-temperature N2 sorption), dispersion and form of introduced copper species (UV–vis-DR, XRD, H2-TPR, NH3-TPD). Mesoporous silicas modified with copper exhibited promising catalytic efficiency in selective catalytic reduction of NO with ammonia (NH3-SCR). The samples containing dispersed copper species (predominantly monomeric copper cations) presented enhanced catalytic activity compared to catalysts containing CuO aggregates. On the other hand, CuO aggregates showed greater catalytic activity in the side process of direct ammonia oxidation by oxygen present in the reaction mixture. It was demonstrated that TIE post-treatment of the samples with urea resulted in most effective improving dispersion of deposited copper and is less destructive for ordered porous structures of mesoporous silica comparing to treatment with ammonia solution. Graphical abstract

Chemical composition and biological activities of nine essential oils obtained from Algerian plants.

The essential oils (EOs) from nine species (Artemisia campestris, A. herba-alba, Juniperus foetidissima, Laurus nobilis, Mentha pulegium, M. spicata, Rosmarinus officinalis, Salvia officinalis, and Thymus vulgaris) of the Algerian flora have been hydrodistilled, analysed, and tested for their antioxidant and antiproliferative properties. A. campestris EO showed a higher content of terpene hydrocarbons; A. herba-alba EO was mainly rich in their oxygenated derivatives. Sesquiterpenes were the most abundant compounds in J. foetidissima EO, while oxygenated monoterpenes and phenylpropanoids prevailed in L. nobilis EO. The other EOs were rich in oxygenated monoterpenes, with quality-quantitative differences. T. vulgaris and L. nobilis performed better in all the antioxidant assays, respectively with IC50 values ranging from 0.0002 and 0.0012 mg/mL in the CUPRAC assay to 2.83 and 3.50 mg/mL in the FRAP assay. T. vulgaris was also the only EO exhibiting an antiproliferative activity towards the human breast (MCF-7) and lung (A549) cancer cell lines.

Effect of Carbon Nanotubes Functionalization on the Chemical Composition and Electrochemical Characteristics of Composites with Layered Potassium Manganese Oxide

Abstract The influence of pretreatment of multiwalled carbon nanotubes (MWCNTs) in oxidizers (solutions of H2O2 and HNO3) on the structure and electrochemical properties of composites with layered potassium-manganese oxide (KxMnO2) was studied. Composites were obtained by soaking carbon nanotubes in an aqueous solution of KMnO4. The electrochemical performance of the composites was evaluated by cyclic voltammetry and galvanostatic charge‒discharge methods. It has been established that stronger oxidation of the MWCNTs surface at the functionalization stage leads to a noticeable increase in the reaction rate as well as the optimal potassium content in the KxMnO2 composition, which provides higher capacitive characteristics of the composite (a maximum specific capacitance of 150 F/g and a rate capability of 43% with increasing density current from 0.1 to 2.0 A/g). The resulting composites are promising active components for increasing the capacitive characteristics of conductive carbon black (CB). Compared with an electrode based only on CB, electrodes based on a combination of the composite and CB at a mass ratio of 1:1 showed specific capacitance values approximately 1.5 to 3 times greater, as well as a twofold increase in rate capability (from 35 to 70%) in the range of discharge current density 0.1 to 2.0 A/g.

In vivo hypotensive effect of a chemically characterised extract from the leaves of Lippia alba (Mill.) N.E.Br.

Lippia alba (erva-cidreira) is often mentioned in Brazilian ethnopharmacological studies. Although its leaves have been used to treat hypertension, few studies have evaluated its hypotensive effects. This work aimed to evaluate the haemodynamic effects of Lippia alba methanolic extract and to characterise its chemical composition. Normotensive rats received an intravenous injection of L. alba extract. Systolic, diastolic, mean arterial pressures, and electrocardiographic data were analysed.1H-qNMR and LC-MS were used to assess the chemical composition. L. alba extract had significant hypotensive effects on systolic, diastolic, and mean arterial pressure. Acteoside was identified as major compound (292.6 ± 2.7 mg/g). Sixty-one other compounds were tentatively identified, mainly phenylethanoids, flavonoids, and iridoids. L. alba extract reduces systolic, diastolic, mean arterial pressure, and appears to be associated with a reduction in heart rate. Acteoside, a known hypotensive compound, may be responsible for these effects, but other structurally similar minority compounds may also contribute.

Influence of seasonal variation on the chromatographic profile and physicochemical properties of Basil (Ocimum basilicum) essential oil

Basil (Ocimum basilicum) is important in the Brazilian economy and its essential oil is used in cooking, industry and perfumery, and has antimicrobial properties. The chemical composition of essential oils can be altered by the action of various factors, whether internal or external to the plant, such as genetics, temperature, water availability and seasonality. The aim of this research was to assess whether seasonality interferes with the chromatographic profile and physicochemical characteristics of basil essential oil. The study was carried out by investigating the technical reports of the Haje Insumos company on the chemical composition using gas chromatography, physical-chemical analysis (density, refractive index and humidity) and organoleptic analysis (appearance, color and odor). Due to the presence of the linalool component in greater quantity, the oil analyzed is characterized as being of the linalool chemotype. The product showed no alterations to its organoleptic characteristics and all the results were in accordance with its specification. In addition, one of the batches had a higher moisture content, which may be related to the environmental conditions at the time of year, which requires attention as water can trigger a hydrolysis reaction in fat-soluble molecules. It is understood that seasonality may be related to changes in the essential oil, and it was possible to contribute to the recognition of this plant's product.

Thermal cycles, structure and properties of welded joints in structural steels during welding in extreme cold conditions

The article summarizes research on the thermal cycles, structure, and properties of welded joints made from low-alloy and low-carbon steels during arc welding in sub-zero temperatures. This review aims to analyze previous research to create solid recommendations for welding steel bridge structures during winter conditions. The results of a comparison of experimental measurements of thermal cycles of welding samples with different sizes made at room and subzero ambient air temperatures (down to minus 50 °C) are considered. It is shown that in small plates with dimensions of 200 × 250 × 10 mm, due to more intense heat reflection from the edges of the specimen, the thermal cycles of welding at different temperatures do not differ significantly. In more massive samples (sized 450 × 250 × 10 mm), an increase in the cooling rate of the overheated welded joint area is observed compared to room temperature welding. The impact of hydrogen on the development of cold cracks in low-alloy steels during welding at temperatures below freezing is examined. Metallographic analysis has revealed that the structural changes that occur during the welding of various steel grades are notably different and are influenced by the steel’s chemical composition as well as the thermal cycle parameters of the welding process. Dilatometric studies indicate that variations in the levels of alloying elements within different grades significantly influence the kinetics of austenite transformation. Therefore, to identify the best welding techniques for subzero temperatures, it is essential to consider not just how heat disperses in these conditions, but also the kinetics of phase changes and their effects on the structure and properties of the products resulting from austenite decomposition.

DsAMP and dsAMPGAN: Deep Learning Networks for Antimicrobial Peptides Recognition and Generation

Antibiotic resistance is a growing public health challenge. Antimicrobial peptides (AMPs) effectively target microorganisms through non-specific mechanisms, limiting their ability to develop resistance. Therefore, the prediction and design of new AMPs is crucial. Recently, deep learning has spurred interest in computational approaches to peptide drug discovery. This study presents a novel deep learning framework for AMP classification, function prediction, and generation. We developed discoverAMP (dsAMP), a robust AMP predictor using CNN Attention BiLSTM and transfer learning, which outperforms existing classifiers. In addition, dsAMPGAN, a Generative Adversarial Network (GAN)-based model, generates new AMP candidates. Our results demonstrate the superior performance of dsAMP in terms of sensitivity, specificity, Matthew correlation coefficient, accuracy, precision, F1 score, and area under the ROC curve, achieving >95% classification accuracy with transfer learning on a small dataset. Furthermore, dsAMPGAN successfully synthesizes AMPs similar to natural ones, as confirmed by comparisons of physical and chemical properties. This model serves as a reliable tool for the identification of novel AMPs in clinical settings and supports the development of AMPs to effectively combat antibiotic resistance.

Increasing nutritional value using alternative protein from sago worm in gluten-free biscuit products

Abstract This research aimed to study the nutritional value of sago worm (Rhynchophorus Ferrugineus) powder, evaluate quantity of protein supplementation derived from sago worm in gluten-free biscuit and determine the nutritional value of the gluten-free biscuit products supplemented with protein from sago worm. It was found that the nutritional value in sago worm powder consisting of carbohydrates (11.14%), protein (24.65%), fat (54.18 %), and ash (2.41%) based on total weight. Dietary fibre content was 6.61% and the total energy was 699.99 kilocalories/100 g. As regards physical and chemical properties, increase in inclusion of sago worm powder led to a decrease in moisture content and an increase in quantity of protein. Increasing the sago worm powder resulting to the colour of the biscuits became darker. The results showed that an increase in sago worm hardness and fracturability to decreased. Sensory evaluation using a 9-point hedonic scale showed that the gluten-free biscuit with 5% sago worm powder of the total weight had the highest score. In addition, the developed products contained moisture content, carbohydrate, fat, protein, dietary fibre and ash of 58.86, 32.56, 6.34, 6.61 and 1.02%. The energy value was found to 567.42 Kcal/100 g.

Basalt Fiber Reinforced Polymers: A Recent Approach to Electromagnetic Interference (EMI) Shielding

ABSTRACTElectromagnetic wave (EMW) radiation pollution is getting more severe as result of the advancement of electronic technology. Researching shielding materials with superior EMI (electromagnetic interference) shielding characteristics is therefore crucial. Basalt fibers (BFs) have been an emerging candidate in the fiber‐reinforced polymer (FRP) category due to their favorable mechanical and chemical properties, along with being favorites in sustainability and having low production costs. Therefore, due to the rising need for cheaper and efficient alternatives in the EMI shielding industry, the EMI shielding is covered in terms of BF composite materials and their properties in this review, starting with the EMI shielding mechanism and followed by how BF composites affect the EMI properties. This review then covers the post‐treatments of BF composites and, finally, the factors of the composites that affect the EMI properties. Moreover, the EMI shielding applications in which BFRPs are used are comprehensively discussed as well. This review aspires to bridge an understanding between EMI shielding as a material property and the BF composites that are developed to aid in the EMI shielding application.