Charge Transfer Cocrystals Research Articles

The DFT Revelation of Optical Properties for Solid-State Anthracene Chalcone Compounds Containing Halogen Groups Modulated by a Charge Transfer Cocrystal Strategy

The DFT Revelation of Optical Properties for Solid-State Anthracene Chalcone Compounds Containing Halogen Groups Modulated by a Charge Transfer Cocrystal Strategy

Bioinspired Photothermal Metal-Organic Framework Cocrystal with Ultra-Fast Water Transporting Channels for Solar-Driven Interfacial Water Evaporation.

Herein, a bioinspired metal-organic framework (MOF) cocrystal produced from the co-assembly of a MOF [Ni3(hexaiminobenzene)2, Ni3(HIB)2] and p-chloranils (CHLs) is reported. Because of the 2D conjugation nature and the formation of persistent anion radicals, this cocrystal shows an excellent photothermal property, and is further used as an absorber in solar-driven interfacial water evaporation. The solar-driven interfacial water evaporation rate (4.04 kg m-2 h-1) is among the best compared with those of previously reported photothermal materials. Molecular dynamics simulation results suggested that the rotating of the CHL molecules relative to the MOF planes tuned the pore size to enable the ultra-fast water transporting, and thus ultra-high water transporting rates (1.11 × 1011 and 3.21 × 1011 H2O s-1 channel-1 at 298.2 and 323.0 K, respectively) for layered cocrystal structures, that are much higher than that of aquaporins (≈1.1 × 1010 H2O s-1 channel-1 at 298.2 K), are observed. The superior solar-driven water evaporation performance is thus attributed to the synergistic effect of the ultra-fast water transporting pores together with the excellent photothermal property of the cocrystal. This research provided a biomimetic strategy of rational design and production of charge transfer cocrystals to modulate their pores and photothermal properties for solar-driven interfacial water evaporation.

Rationally Integrating Charge-Transfer Cocrystal and Ni(II) Organometallics for Visualized Photo/Thermochromic Sensors.

Smart materials demonstrate fascinating responses to environmental physical/chemical stimuli, including thermal, photonic, electronic, humidity, or magnetic stimuli, which have attracted intensive interest in material chemistry. However, their limited/harsh stimuli-responsive behavior or sophisticated postprocessing leads to enormous challenges for practical applications. Herein, we rationally designed and synthesized thermochromic Ni(II) organometallic [(C2H5)2NH2]2NiCl4-xBrx via a facile mechanochemical strategy, which demonstrated a reversible switch from yellow to blue color with a tunable phase-transition temperature from 75.6 to 61.7 °C. The simple electrospinning technology was applied to fabricate thermochromic Ni(II) organometallic-based nanofiber membranes for temperature monitoring. Furthermore, the organic charge-transfer cocrystal with a wide spectral absorption of 300-1950 nm and a high-efficiency photothermal conversion was combined with thermochromic Ni(II) organometallics for the desired dual-stimuli photo/thermochromism. This work supplies a new strategy for realizing multiple stimuli-responsive applications, such as thermal/light sensor displays and information storage.

Preparation, structure and optical properties of TCNB-based charge-transfer cocrystals

Organic charge transfer cocrystals exhibit interesting properties due to their multi-components synergistic and collective effect. Herein, using 1,2,4,5-tetracyanobenzene (TCNB) as electron acceptor, carbazole (CARB), dibenzothiophene (DBZP) and dibenzofuran (DBZF) as electron donors, three charge transfer cocrystals of CARB-TCNB, DBZP-TCNB and DBZF-TCNB were synthesized by solvent evaporation method and solvent-assisted grinding method. These cocrystals were constructed based on the π–π stacking interactions and CH…N hydrogen bonds and confirmed by the SXRD analysis. The stacking modes are consistent with the model that predicted by molecular electrostatic potential analysis (ESP). The IGM and AIM analyses suggested that the π-π stacking and CH…N hydrogen bonds are weak in nature. The purity and homogeneity of cocrystals and grinding products were verified by PXRD analysis. In addition, the IR, UV–vis absorption and luminescent properties were investigated, and the cocrystals and grinding products exhibited different behaviors from that of their precures. In short, this work not only reports the CT complexes synthesized by liquid- and solid- strategies, but also provides an in-depth understanding of the spectral changes caused by the CT interactions.

Macrocycle‐Based Charge Transfer Cocrystals with Dynamically Reversible Chiral Self‐Sorting Display Chain Length‐Selective Vapochromism to Alkyl Ketones

AbstractChirality‐driven self‐sorting plays an essential role in controlling the biofunction of biosystems, such as the chiral double‐helix structure of DNA from self‐recognition by hydrogen bonding. However, achieving precise control over the chiral self‐sorted structures and their functional properties for the bioinspired supramolecular systems still remains a challenge, not to mention realizing dynamically reversible regulation. Herein, we report an unprecedented saucer[4]arene‐based charge transfer (CT) cocrystal system with dynamically reversible chiral self‐sorting synergistically induced by chiral triangular macrocycle and organic vapors. It displays efficient chain length‐selective vapochromism toward alkyl ketones due to precise modulation of optical properties by vapor‐induced diverse structural transformations. Experimental and theoretical studies reveal that the unique vapochromic behavior is mainly attributed to the formation of homo‐ or heterochiral self‐sorted assemblies with different alkyl ketone guests, which differ dramatically in solid‐state superstructures and CT interactions, thus influencing their optical properties. This work highlights the essential role of chiral self‐sorting in controlling the functional properties of synthetic supramolecular systems, and the rarely seen controllable chiral self‐sorting at the solid‐vapor interface deepens the understanding of efficient vapochromic sensors.

Macrocycle-Based Charge Transfer Cocrystals with Dynamically Reversible Chiral Self-Sorting Display Chain Length-Selective Vapochromism to Alkyl Ketones.

Chirality-driven self-sorting plays an essential role in controlling the biofunction of biosystems, such as the chiral double-helix structure of DNA from self-recognition by hydrogen bonding. However, achieving precise control over the chiral self-sorted structures and their functional properties for the bioinspired supramolecular systems still remains a challenge, not to mention realizing dynamically reversible regulation. Herein, we report an unprecedented saucer[4]arene-based charge transfer (CT) cocrystal system with dynamically reversible chiral self-sorting synergistically induced by chiral triangular macrocycle and organic vapors. It displays efficient chain length-selective vapochromism toward alkyl ketones due to precise modulation of optical properties by vapor-induced diverse structural transformations. Experimental and theoretical studies reveal that the unique vapochromic behavior is mainly attributed to the formation of homo- or heterochiral self-sorted assemblies with different alkyl ketone guests, which differ dramatically in solid-state superstructures and CT interactions, thus influencing their optical properties. This work highlights the essential role of chiral self-sorting in controlling the functional properties of synthetic supramolecular systems, and the rarely seen controllable chiral self-sorting at the solid-vapor interface deepens the understanding of efficient vapochromic sensors.

Organic Cocrystal Alloys: From Three Primary Colors to Continuously Tunable Emission and Applications on Optical Waveguides and Displays.

Multicolor luminescence of organic fluorescent materials is an essential part of lighting and optical communication. However, the conventional construction of a multicolor luminescence system based on integrating multiple organic fluorescent materials of a single emission band remains complicated and to be improved. Herein, organic alloys (OAs) capable of full-color emission are synthesized based on charge transfer (CT) cocrystals. By adjusting the molar ratio of electron donors, the emission color of the OAs can be conveniently and continuously regulated in a wide visible range from blue (CIE: 0.187, 0.277), to green (CIE: 0.301, 0.550), and to red (CIE: 0.561, 0.435). The OAs show analogous 1D morphology with smooth surface, allowing for full-color waveguides with low optical-loss coefficient. Impressively, full-color optical displays are easily achieved through the OAs system with continuous emission, which shows promising applications in the field of optical display and promotes the development of organic photonics.

Transforming Thermally Activated Delayed Fluorescence to Room-Temperature Phosphorescence through Modulation of the Donor in Charge-Transfer Cocrystals.

A cocrystallization strategy is used through incorporation of 1,2,4,5-tetracyanobenzene (TCNB) as an acceptor with halogen-substituent thioxanthone (TX) derivatives as donors. The resulting cocrystals TT-R (R = H, F, Cl, Br, or I) transform the thermally activated delayed fluorescence emission in the TT-H, TT-F, and TT-Cl cocrystals to room-temperature phosphorescence in the TT-Br and TT-I cocrystals. Definite crystal packing structures demonstrate a 1:1 alternative donor-acceptor stacking in the TT-H cocrystal, a 2:1 alternative donor-acceptor stacking in the TT-F and TT-Cl cocrystals, and a separate stacking of donor and acceptor in the TT-Br and TT-I cocrystals. A transformation law can be revealed that with an increase in atomic number from H, F, Cl, Br, to I, the cocrystals show the structural transformation of the number of aggregated TX-R molecules from monomers to dimers and finally to multimers. This work will facilitate an understanding of the effect of halogen substituents on the crystal packing structure and luminescence properties in the cocrystals.

Pressure-Induced Amidine Formation via Side-Chain Polymerization in a Charge-Transfer Cocrystal.

Compression of small molecules can induce solid-state reactions that are difficult or impossible under conventional, solution-phase conditions. Of particular interest is the topochemical-like reaction of arenes to produce polymeric nanomaterials. However, high reaction onset pressures and poor selectivity remain significant challenges. Herein, the incorporation of electron-withdrawing and -donating groups into π-stacked arenes is proposed as a strategy to reduce reaction barriers to cycloaddition and onset pressures. Nevertheless, competing side-chain reactions between functional groups represent alternative viable pathways. For the case of a diaminobenzene:tetracyanobenzene cocrystal, amidine formation between amine and cyano groups occurs prior to cycloaddition with an onset pressure near 9 GPa, as determined using vibrational spectroscopy, X-ray diffraction, and first-principles calculations. This work demonstrates that reduced-barrier cycloaddition reactions are theoretically possible via strategic functionalization; however, the incorporation of pendant groups may enable alternative reaction pathways. Controlled reactions between pendant groups represent an additional strategy for producing unique polymeric nanomaterials.

Anion-Counterion Strategy toward Organic Cocrystal Engineering for Near-Infrared Photothermal Conversion and Solar-Driven Water Evaporation.

An anion-counterion strategy is proposed to construct organic mono-radical charge-transfer cocrystals for near-infrared photothermal conversion and solar-driven water evaporation. Ionic compounds with halogen anions as the counterions serve as electron donors, providing the necessary electrons for efficient charge transfer with unchanged skeleton atoms and structures as well as the broad red-shifted absorption (200-2000 nm) and unprecedented photothermal conversion efficiency (~90.5 %@808 nm) for the cocrystals. Based on these cocrystals, an excellent solar-driven interfacial water evaporation rate up to 6.1±1.1 kg ⋅ m-2 ⋅ h-1 under 1 sun is recorded due to the comprehensive evaporation effect from the cocrystal loading in polyurethane foams and chimney addition, such performance is superior to the reported results on charge-transfer cocrystals or other materials for solar-driven interfacial evaporation. This prototype exhibits the great potential of cocrystals prepared by the one-step mechanochemistry method in practical large-scale seawater desalination applications.

Facile synthesis of a 2,5-dihydroxyterephthalic acid-based charge transfer cocrystal for photoelectric applications

The assembly of 2,5-dihydroxyterephthalic acid donor and 1,10-phenanthroline acceptor afforded a charge transfer cocrystal complex, which was applied in photoelectric detector and phosphor-converted light-emitting diodes.

Modulation of luminescence properties of cocrystals composed of amino substituted dimethyl phthalates and 1,2,4,5-tetracyanobenzene by crystal engineering

Charge transfer cocrystals are synthesized to tune the luminescence properties of organic crystals.

Halogen-bonded charge-transfer co-crystal scintillators for high-resolution X-ray imaging.

The development of high-quality organic scintillators encounters challenges primarily associated with the weak X-ray absorption ability resulting from the presence of low atomic number elements. An effective strategy involves the incorporation of halogen-containing molecules into the system through co-crystal engineering. Herein, we synthesized a highly fluorescent dye, 2,5-di(4-pyridyl)thiazolo[5,4-d]thiazole (Py2TTz), with a fluorescence quantum yield of 12.09%. Subsequently, Py2TTz was co-crystallized with 1,4-diiodotetrafluorobenzene (I2F4B) and 1,3,5-trifluoro-2,4,6-triiodobenzene (I3F3B) obtaining Py2TTz-I2F4 and Py2TTz-I3F3. Among them, Py2TTz-I2F4 exhibited exceptional scintillation properties, including an ultrafast decay time (1.426 ns), a significant radiation luminescence intensity (146% higher than Bi3Ge4O12), and a low detection limit (70.49 nGy s-1), equivalent to 1/78th of the detection limit for medical applications (5.5 μGy s-1). This outstanding scintillation performance can be attributed to the formation of halogen-bonding between I2F4B and Py2TTz. Theoretical calculations and single-crystal structures demonstrate the formation of halogen-bond-induced rather than π-π-induced charge-transfer cocrystals, which not only enhances the X-ray absorption ability and material conductivity under X-ray exposure, but also constrains molecular vibration and rotation, and thereby reducing non-radiative transition rate and sharply increasing its fluorescence quantum yields. Based on this, the flexible X-ray film prepared based on Py2TTz-I2F4 achieved an ultrahigh spatial resolution of 26.8 lp per mm, underscoring the superiority of this strategy in developing high-performance organic scintillators.

Investigating the binding of organic charge transfer co-crystals to human serum albumin by experimental and theoretical methods: spectroscopy, molecular docking and DFT/TD-DFT studies

A new complex was formed by the transfer of charge between 2-ethylimidazole (2-EIM) as an electron donor and 1,2,4,5-benzenetetracarboxylic acid (BTC) as a π acceptor and studied using various physical and chemical methods.

Synthesis and photophysical properties of charge transfer cocrystals based on TCNB and fluorene and its derivatives

A series of charge transfer cocrystals with fluorescence properties involving 1,2,4,5-tetracyanobenzene as acceptor, fluorene, 2-bromofluorene, carbazole and 2-bromocarbazole as donor were synthesized via cocrystal design strategies.

Macrocycle-based charge transfer co-crystals with specific selective vapochromism to benzene

Macrocycle co-crystals consisting of phenanthrene[2]arene and 1,2,4,5-tetracyanobenzene have been prepared. The formed macrocycle co-crystals exhibited a specific selective vapochromic response to benzene.

Stretchable photothermal membrane of NIR-II charge-transfer cocrystal for wearable solar thermoelectric power generation

Harvesting sunlight into cost-effective electricity presents an enticing prospect for self-powered wearable applications. The photothermal materials with an extensive absorption are fundamental to achieve optical and thermal concentration of the sunlight for efficiency output electricity of wearable solar thermoelectric generators (STEGs). Here, we synthesize an organic charge-transfer (CT) cocrystal with a flat absorption from ultraviolet to second near-infrared region (200 to 1950 nanometers) and a high photothermal conversion efficiency (PCE) of 80.5%, which is introduced into polyurethane toward large-area nanofiber membrane by electrospinning technology. These corresponding membranes demonstrate a high PCE of 73.7% under the strain more than 80%. Sandwiched with carbon nanotube–based thermoelectric fibers, the membranes as stretchable solar absorbers of STEGs could supply a notably increase temperature gradient, processing a maximum output voltage density of 23.4 volts per square meter at 1:00 p.m. under sunlight. This strategy presents an important insight in heat management for wearable STEGs with a desired electricity output.

Supramolecular Organic Ferroelectric Materials from Donor-Acceptor Systems.

Organic ferroelectric (FE) materials, though known for more than a century, are yet to reach close to the benchmark of inorganic or hybrid materials in terms of the magnitude of polarization. Amongst the different classes of organic systems, donor (D)-acceptor (A) charge-transfer (CT) complexes are recognized as promising for ferroelectricity owing to their neutral-to-ionic phase transition at low temperature. This review presents an overview of different supramolecular D-A systems that have been explored for FE phase transitions. The discussion begins with a general introduction of ferroelectricity and its different associated parameters. Then it moves on to show early examples of CT cocrystals that have shown FE properties at sub-ambient temperature. Subsequently, recent developments in the field of room temperature (RT) ferroelectricity, exhibited by H-bond-stabilized lock-arm supramolecular-ordering (LASO) in D-A co-crystals or other FE CT-crystals devoid of neutral-ionic phase transition are discussed. Then the discussion moves on to emerging reports on other D-A soft materials such as gel and foldable polymers; finally it shows very recent developments in ferroelectricity in supramolecular assemblies of single-component dipolar or ambipolar π-systems, exhibiting intra-molecular charge transfer. The effects of structural nuances such as H-bonding, balanced charge transfer and chirality on the observed ferroelectricity is described with the available examples. Finally, piezoelectricity in recently reported ambipolar ADA-type systems are discussed to highlight the future potential of these soft materials in micropower energy harvesting.

Influence of Internal Molecular Motions in the Photothermal Conversion Effect of Charge-Transfer Cocrystals

Influence of Internal Molecular Motions in the Photothermal Conversion Effect of Charge-Transfer Cocrystals

Magnetic Bistability in an Organic Radical-Based Charge Transfer Cocrystal.

We report herein an organic charge transfer cocrystal complex, consisting of a stable radical TPVr and an electron acceptor TCNQF4, as a rare sort of all-organic-based magnetic bistable materials with a thermally activated magnetic hysteresis loop over the temperature range from 170 to 260 K. Detailed X-ray crystallographic studies and theoretical calculations revealed that while a π-associated radical anion dimer was formed upon an integer charge transfer process from TPVr to the TCNQF4 molecules within the cocrystal lattice, the resulting TCNQF4·- π-dimers were found to exhibit varied intradimer π-stacking distances and singly occupied molecular orbital overlaps at different temperatures, thus yielding two different singlet states with distinct singlet-triplet gaps above and below the loop, which eventually contributed to the thermally excited molecular magnetic bistability.