Charge Separation Research Articles

Charge Transfer and Intersystem Crossing in Compact Naphthalenediimide-Phenothiazine Triads: Synthesis and Study of the Photophysical Property with Transient Optical and Electron Paramagnetic Resonance Spectroscopic Methods.

In order to obtain a long-lived charge separation (CS) state in compact electron donor-acceptor molecular systems, we prepared a series of naphthalenediimide (NDI)-phenothiazine (PTZ) triads, with phenylene as the linker between the donor and acceptor. Conformation restriction is imposed to control the mutual orientation of the NDI and PTZ units by attaching methyl groups on the phenylene linker to tune the electronic coupling between the donor and the acceptor. Moreover, the PTZ moiety was oxidized to sulfoxide to tune the ordering of the CS state and the 3LE state (LE: locally excited state). UV-vis absorption spectra indicate electronic coupling between NDI with the phenylene linker as well as the PTZ units, manifested by the appearance of a charge-transfer (CT) absorption band, whereas this coupling is devoid in the triads with conformation restriction imposed. Fluorescence is strongly quenched in the triads compared to the reference compound, indicating electron transfer upon photoexcitation. Femtosecond transient absorption spectra indicate that the CS takes 0.8 ps, and then the 3LE state is formed by charge recombination in 83 ps. Nanosecond transient absorption (ns-TA) spectra show that the 3NDI state was observed in nonpolar solvents such as cyclohexane (triplet state lifetime: 95.7 μs), whereas the CS state was observed in more polar solvents. The CS state lifetimes are up to 1.2 μs (in toluene). Time-resolved electron paramagnetic resonance spectra of the triads in toluene consist of two types of signals: CS states (narrower signals, ∼10 mT) and 3LE states (broader signals, ∼50 to 200 mT). In the spectra of the triads containing PTZ, the CS state signals dominate, whereas for the triads containing oxidized PTZ, the 3NDI signals (zero-field splitting D ≈ 2000 MHz) prevail, both observations being in agreement with the ns-TA spectral studies. The electron spin polarization phase pattern of the 3NDI states of the triads indicates that the intersystem crossing (ISC) mechanism is spin-orbit charge-transfer ISC. Considering the 3CS state as ion pairs, the electron-exchange energy (J) is determined to be -39 to -59 MHz, and the electron spin dipolar interaction is 83-92 MHz.

Photoredox Cascade Catalysts for Solar Hydrogen Production from Sustainable Hydrogen Sources.

Visible-light-driven photocatalytic hydrogen (H2) production has been extensively studied as a clean and sustainable energy resource. Although sacrificial electron donors (SEDs) are commonly used to evaluate photocatalytic activity, their irreversible decomposition forces charge separation, which disrupts the inherent dual productivity of photocatalysis, that is, the formation of both the reduction and oxidation products. To achieve highly efficient photoinduced charge separation without SED decomposition, the layer-by-layer assembly of redox-active photosensitizing dyes and electron mediators through Zr4+-phosphonate bonds has been extensively studied as an artificial mimic of the electron transport chain in natural photosynthesis. This concept paper presents an overview of photoredox cascade catalytic (PRCC) systems comprising multiple Ru(II)-trisbipyridine-type dyes and mediator layers on Pt-loaded TiO2 nanoparticles for H2 production from redox reversible electron donors (RREDs). The PRCC structure-activity relationship for photocatalytic H2 production is briefly discussed in terms of layer thickness, surface structure and modification, and cooperativity with molecular oxidation catalysts. Finally, new insights into the design of efficient dual-production photocatalysts based on the PRCC structure are presented.

Coupling Cu Coordination Polymers with CdS Forming an S-Scheme Heterojunction for Rapid Charge Separation and High Photocatalytic Activity.

Energy and the environment are significant impacting factors for the future development of humankind. In order to improve the corrosion resistance of CdS and decrease the recombination of photogenerated carriers, a novel Cu-CPs@CdS heterojunction with high efficiency mesopores was constructed by a simple hydrothermal method. The effective interfacial contact formation between nano-CdS and Cu-CPs promotes the transfer of photogenerated carriers while exhibiting a high spatial separation rate of charges. The photocatalytic performance of the heterojunction was evaluated by the photocatalytic degradation of organic pollutants and photocatalytic hydrogen generation. The photocatalytic degradation of ciprofloxacin (CIP) could reach 90.34%, and the hydrogen generation was high as 9227.82 μmol·g-1 under simulated sunlight irradiation. The boosted photocatalytic activity of Cu-CPs@CdS results from (i) the formation of coordination bonds, which not only enhanced the stability of heterojunctions but also provided a path for photogenerated carrier migration, (ii) integrating Cu-CPs, which provided more active sites, and (iii) the matched energy band structure between CdS and Cu-CPs that promoted speedy S-scheme interfacial charge-transfer pathways, culminating in efficient photogenerated charge separation and transfer. This research offered a fresh tactic to restrict photocorrosion and enhance the production of photocatalytic H2 over CdS-based catalysts.

Construction of dual driving force in carbon nitride for highly efficient hydrogen evolution: Simultaneously manipulating carriers transport in intra- and interlayer

Photocatalytic hydrogen evolution is widely recognized as an environmentally friendly approach to address future energy crises and environmental issues. However, rapid recombination of photo-induced charges over carbon nitride in lateral and vertical direction hinder this process. Herein, we proposed an effective strategy involving the embedding of benzene rings and the intercalation of platinum atoms on carbon nitride for a controlled intralayer and interlayer charges flow. Modified carbon nitride exhibits a significant higher hydrogen evolution rate (6288.5 μmol/g/h), which is 42 times greater than that of pristine carbon nitride. Both experiments and simulations collectively indicate that the improved photocatalytic activities can be attributed to the adjustment of the highly symmetric structure of carbon nitride, achieved by embedding benzene rings to induce the formation of an intralayer build-in electric field and intercalating Pt atoms to enhance interlayer polarization, which simultaneously accelerate lateral and vertical charges migration. This dual-direction charges separation mechanism in carbon nitride provides valuable insights for the development of highly active photocatalysis.

Improving the Photoactivity of Porphyrin-Based Metal-Organic Frameworks via Constructing [Ce-O] Active Site and Vacancy.

Defect engineering of metal-organic frameworks (MOFs) is a versatile approach to tailoring their electronic structures and photocatalytic performance. Herein, Ce-based porphyrin MOFs (CMFs) featuring controlled structural defects were successfully prepared using a simple acid modulation strategy to drive the photocatalytic H2 generation. The [Ce-O] unit serves as the active site via a ligand-to-metal charge transfer process, which has been confirmed by in situ XPS analysis. Abundant exposed coordinatively unsaturated Ce-O centers are beneficial for the adsorption and activation of water molecules, which is an important factor for improving the photocatalytic performance of the synthesized defective MOFs. In addition, optical and electrochemical experiments indicate that CMFs with more oxygen vacancies possess higher charge separation efficiency. As a result, the optimized CMF(Zn)-200 sample afforded high stability and activity in the H2 generation (up to 1603.3 μmol·g-1·h-1 under cocatalyst-free conditions) and tetracycline hydrochloride removal efficiency (97%), which was 8.45 and 97 times higher than that of pure meso-tetra(4-carboxyphenyl)porphine. This study demonstrates that effective structural modulation and defect introduction can improve the activity and stability of PMOF-based photocatalysts.

Changing Benzoxazole Ring into Nonring Imine Linkages on Covalent Organic Frameworks with Tuning H2O2 Photosynthesis Performance.

Two π-conjugated covalent organic frameworks (COFs) with nonring imine or benzoxazole ring linkages were prepared by reacting 3,3'-dihydrooxybenzidine (BDOH) with 3,5-triformylbenzene (Tb) in the presence or absence of benzimidazole (BDOH-Tb-IM and BDOH-Tb-BO). Although two COFs indicated similar composition, crystalline structures, and morphologies, imine-based BDOH-Tb-IM exhibited a photocatalytic H2O2 production rate of 2490 μmol·g-1·h-1 in sacrificial reagent-free pure water, higher than that of benzoxazole-based BDOH-Tb-BO-a (1168 μmol·g-1·h-1). The higher photocatalytic activity of BDOH-Tb-IM was attributed to its more efficient photoinduced charge separation and utilization efficiency and different 2e- ORR active sites over the two COFs. This study demonstrated an available ring effect to adjust photocatalytic performance between π-conjugated COFs.

Delocalized Orbitals Over Metal Clusters and Organic Linkers Enable Boosted Charge Transfer in Metal-Organic Framework for Overall CO2 Photoreduction.

The conversion of CO2 to C2 through photocatalysis poses significant challenges, and one of the biggest hurdles stems from the sluggishness of the multi-electron transfer process. Herein, taking metal-organic framework (PFC-98) as a model photocatalyst, we report a new strategy to facilitate charge separation. This strategy involves matching the energy levels of the lowest unoccupied node and linker orbitals of the MOF, thereby creating the lowest unoccupied crystal orbital (LUCO) delocalized over both the node and linker. This feature enables the direct excitation of electrons from photosensitive linker to the catalytic centers, achieving a direct charge transfer (DCT) pathway. For comparison, an isoreticular MOF (PFC-6) based on analogue components but with far apart frontier energy level was synthesized. The delocalized LUCO caused the presence of an internal charge-separated state (ICS), prolonging the excited state lifetime and further inhibiting the electron-hole recombination. The presence of an internal charge-separated state (ICS) prolongs the excited state lifetime and further inhibits the electron-hole recombination. Moreover, it also induced abundant electrons accumulating at the catalytic sites, enabling the multi-electron transfer process. As a result, the material featuring delocalized LUCO exhibits superior overall CO2 photocatalytic performance with high C2 production yield and selectivity.

Interfacial Engineering of BiVO4/Bi2Mo2O9 Heterojunction Toward Photogenerated Carriers Anisotropic Transfer

Developing an advanced strategy to decrease the charge recombination of BiVO4 is a vital requirement to boost charge transfer for photoelectrochemical water oxidation. Herein, a type II BiVO4/Bi2Mo2O9 heterojunction is successfully synthesized on fluorine‐doped tin oxide substrate by successive ionic layer adsorption and reaction method. Thanks to the Fermi‐level energy difference of 275 mV between BiVO4 and Bi2Mo2O9, an outward built‐in electric filed pointing from Bi2Mo2O9 to BiVO4 is induced, which accelerates the directional flowing of photogenerated electron and hole. Such a unique design structure fastens the electron migration from BiVO4 to Bi2Mo2O9, and the holes will transfer to the surface to participate in water oxidation. The longer lifetime (9.2 ns) by time‐resolved transient photoluminescence signifies that the Bi2Mo2O9 can boost interfacial carriers’ anisotropic migration; the surface charge transfer rate of BiVO4/Bi2Mo2O9 is up to 387.6 s−1 (1.4 V vs reversible hydrogen electrode (RHE)). The BiVO4/Bi2Mo2O9 heterojunction exhibits a remarkable charge separation efficiency of 64% and outstanding photocurrent density of 0.9 mA cm−2 at 1.23 V versus RHE.

NIR-II-Responsive Versatile Nanozyme Based on H2O2 Cycling and Disrupting Cellular Redox Homeostasis for Enhanced Synergistic Cancer Therapy.

Disturbing cellular redox homeostasis within malignant cells, particularly improving reactive oxygen species (ROS), is one of the effective strategies for cancer therapy. The ROS generation based on nanozymes presents a promising strategy for cancer treatment. However, the therapeutic efficacy is limited due to the insufficient catalytic activity of nanozymes or their high dependence on hydrogen peroxide (H2O2) or oxygen. Herein, we reported a nanozyme (CSA) based on well-defined CuSe hollow nanocubes (CS) uniformly covered with Ag nanoparticles (AgNPs) to disturb cellular redox homeostasis and catalyze a cascade of intracellular biochemical reactions to produce ROS for the synergistic therapy of breast cancer. In this system, CSA could interact with the thioredoxin reductase (TrxR) and deplete the tumor microenvironment-activated glutathione (GSH), disrupting the cellular antioxidant defense system and augmenting ROS generation. Besides, CSA possessed high peroxidase-mimicking activity toward H2O2, leading to the generation of various ROS including hydroxyl radical (•OH), superoxide radicals (•O2-), and singlet oxygen (1O2), facilitated by the Cu(II)/Cu(I) redox and H2O2 cycling, and plentiful catalytically active metal sites. Additionally, due to the absorption and charge separation performance of AgNPs, the CSA exhibited excellent photothermal performance in the second near-infrared (NIR-II, 1064 nm) region and enhanced the photocatalytic ROS level in cancer cells. Owing to the inhibition of TrxR activity, GSH depletion, high peroxidase-mimicking activity of CSA, and abundant ROS generation, CSA displays remarkable and specific inhibition of tumor growth.

Optimized SnO2 preparation and coherent interlayers for enhanced charge dynamics and efficient perovskite photovoltaics

The dense, uniform and conformal electron transport layers (ETLs) will largely promote charge separation and extraction. Here, the mixed acid (hydrochloric acid and nitric acid) was used to regulate preparation process and enhance utilization of materials, and the colloids of tin oxide (SnO2) nanocrystals were prepared through hydrothermal process. The complete dissolution of Sn source can increase purity, produce homogeneous precursor, reduce grain sizes and improve film-coverage. As confirmed, a coherent interlayer at the SnO2 ETLs/perovskite interfaces will be achieved by coupling a Cl-bonded SnO2 film with a Cl-containing perovskite precursor. This thin coherent interlayer will largely reduce interface traps, enhance rapid carrier extraction, and impede charge recombination. The uniform polymer phase of (PEO)120-(PPO)30 will be used to passivate traps at the grain boundaries of perovskite films and further improve the photovoltaic performance. The maximum energy conversion efficiency (23.17%, a VOC of 1.153 V, a JSC of 24.75 mA cm−2 and a FF of 0.812) of perovskite solar cells was achieved. The charge separation, extraction, and recombination kinetics (charge dynamic process) was determined by the related characterization techniques. The functionalized SnO2-ETLs and formed coherent interlayer will provide a simple strategy to effectively decrease interface traps, enhance charge extraction, and facilitate development of perovskite solar cells.

Dihydropyridopyrazine Functionalized Xanthene: Generating Stable NIR Dyes with Small-Molecular Weight by Enhanced Charge Separation.

Near-infrared region (NIR; 650-1700 nm) dyes offer many advantages over traditional dyes with absorption and emission in the visible region. However, developing new NIR dyes, especially organic dyes with long wavelengths, small molecular weight, and excellent stability and biocompatibility, is still quite challenging. Herein, we present a general method to enhance the absorption and emission wavelengths of traditional fluorophores by simply appending a charge separation structure, dihydropyridopyrazine. These novel NIR dyes not only exhibited greatly redshifted wavelengths compared to their parent dyes, but also displayed a small molecular weight increase together with retained stability and biocompatibility. Specifically, dye NIR-OX, a dihydropyridopyra-zine derivative of oxazine with a molecular mass of 386.2 Da, exhibited an absorption at 822 nm and an emission extending to 1200 nm, making it one of the smallest molecular-weight NIR-II emitting dyes. Thanks to its rapid metabolism and long wave-length, NIR-OX enabled high-contrast bioimaging and assessment of cholestatic liver injury in vivo and also facilitated the evalua-tion of the efficacy of liver protection medicines against cholestatic liver injury.

Dihydropyridopyrazine Functionalized Xanthene: Generating Stable NIR Dyes with Small‐Molecular Weight by Enhanced Charge Separation

Near‐infrared region (NIR; 650–1700 nm) dyes offer many advantages over traditional dyes with absorption and emission in the visible region. However, developing new NIR dyes, especially organic dyes with long wavelengths, small molecular weight, and excellent stability and biocompatibility, is still quite challenging. Herein, we present a general method to enhance the absorption and emission wavelengths of traditional fluorophores by simply appending a charge separation structure, dihydropyridopyrazine. These novel NIR dyes not only exhibited greatly redshifted wavelengths compared to their parent dyes, but also displayed a small molecular weight increase together with retained stability and biocompatibility. Specifically, dye NIR‐OX, a dihydropyridopyra‐zine derivative of oxazine with a molecular mass of 386.2 Da, exhibited an absorption at 822 nm and an emission extending to 1200 nm, making it one of the smallest molecular‐weight NIR‐II emitting dyes. Thanks to its rapid metabolism and long wave‐length, NIR‐OX enabled high‐contrast bioimaging and assessment of cholestatic liver injury in vivo and also facilitated the evalua‐tion of the efficacy of liver protection medicines against cholestatic liver injury.

NC Meets CN: Porous Photoanodes with Polymeric Carbon Nitride/ZnSe Nanocrystal Heterojunctions for Photoelectrochemical Applications.

The utilization of photoelectrochemical cells (PEC) for converting solar energy into fuels (e.g., hydrogen) is a promising method for sustainable energy generation. We demonstrate a strategy to enhance the performance of PEC devices by integrating surface-functionalized zinc selenide (ZnSe) semiconductor nanocrystals (NCs) into porous polymeric carbon nitride (CN) matrices to form a uniformly distributed blend of NCs within the CN layer via electrophoretic deposition (EPD). The achieved type II heterojunction at the CN/NC interface exhibits intimate contact between the NCs and the CN backbone since it does not contain insulating binders. This configuration promotes efficient charge separation and suppresses carrier recombination. The reported CN/NC composite structure serves as a photoanode, demonstrating a photocurrent density of 160 ± 8 μA cm-2 at 1.23 V vs a reversible hydrogen electrode (RHE), 75% higher compared with a CN-based photoelectrode, for approximately 12 h. Spectral and photoelectrochemical analyses reveal extended photoresponse, reduced charge recombination, and successful charge transfer at the formed heterojunction; these properties result in enhanced PEC oxygen production activity with a Faradaic efficiency of 87%. The methodology allows the integration of high-quality colloidal NCs within porous CN-based photoelectrodes and provides numerous knobs for tuning the functionality of the composite systems, thus showing promise for achieving enhanced solar fuel production using PEC.

Efficient and stable photocatalytic degradation of triazophos pesticides by g-C3N4/WO2.72 nanocomposite with S-scheme heterojunction and oxygen vacancies

Facing the increasingly severe issue of organophosphorus pesticide contamination globally, this study has developed a novel g-C3N4/WO2.72 nanocomposite (abbreviated as CN/WO), featuring a specially designed S-scheme heterojunction and oxygen vacancies, to optimize the photocatalytic degradation of triazophos pesticides. Experiments demonstrate that the composite containing 30 % CN (termed 30-CN/WO) can efficiently degrade most of the triazophos within 100 minutes, and it exhibits exceptional stability across four successive cycles, significantly outperforming the individual CN and WO materials. Advanced analytical techniques such as X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), and surface work function assessments have confirmed the pivotal role of the S-scheme heterojunction and oxygen vacancies in enhancing charge separation efficiency. This work not only advances the development of high-performance photocatalytic materials but also provides new strategies and practical scientific evidence for addressing organophosphorus pesticide pollution globally, showcasing its broad application prospects and scientific significance in environmental management.

Fabrication of SrTiO3 anchored rGO/g-C3N4 photocatalyst for the removal of mixed dye from wastewater: dual photocatalytic mechanism

A metal-free combination of rGO/g-C3N4-coupled SrTiO3 (SRN) ternary nanocomposite prepared via a wet impregnation method for UV–Vis light photocatalytic applications. Various physicochemical properties of the samples were investigated by several spectroscopic techniques including X-ray diffraction (XRD), FT-IR, Raman, field emission scanning electron microscopy with energy dispersive X-ray spectroscopy (FE-SEM-EDX), high-resolution transmission electron microscopy (HR-TEM), UV–Vis, photoluminescence (PL), X-ray photoelectron spectroscopy (XPS) and Brunauer–Emmett–Teller (BET) surface area analysis. The data suggest agglomerated SRT nanoparticles are dispersed and distributed throughout the surface of the rGO sheets and GCN nanostructures. The photocatalytic performance of the SRN towards combined mixed dye and its degradation activities were evaluated towards the most common industrial effluents, Rhodamine B (RhB) and Methylene blue (MB), under UV–Vis light illumination. The results revealed that the degradation efficiency of the SRN photocatalyst shows excellent performance compared with that of the binary composition and the pure SrTiO3 (SRT) sample. The reaction rate constant for RhB was estimated to be 0.0039 min−1 and for MB to be 0.0316 min−1, which are 3.26 (RhB) and 4.21 (MB) times faster than the pure SRT sample. The enhanced degradation efficiency was attained not only by interfacial formation but also by the speedy transportation of electrons across the heterojunction. After 5 runs of the photocatalytic recylic process, the SRN photocatalyst exhibited ultimate stability without structural changes, and no noticeable degradation was observed. The outcomes of the ternary SRN nanocomposite manifest a dual photocatalytic scheme, the photocatalytic enrichment could be caused by the Z-scheme charge transfer process between GCN, SRT, and rGO nanocomposite, which helps effectual charge separation and keeps a high redox potential. From the results, SRN sample provides insight into the integration of an effective and potential photocatalyst for wastewater treatment toward real-time environmental remediation applications.

Boosting Acidic Water Oxidation on Hematite Photoanodes with Synergistic Effects of Ce‐Doped Co3O4 Nanoparticles

AbstractPhotoelectrochemical (PEC) water splitting is pivotal for addressing the clean and renewable energy demands. However, developing low‐cost, efficient, and robust non‐precious metal catalysts for the acidic oxygen evolution reaction (OER) remains a significant challenge. In this study, we introduced Ce to modulate the electronic structure of Co3O4, enhancing the stability of Co3O4 without compromising its activity. Ce‐doped Co3O4 nanoparticles were electrodeposited onto Ti‐doped hematite surfaces (Ce : Co3O4/Fe2O3), significantly enhancing the PEC performance for water splitting under acidic conditions. These catalysts achieved high photocurrent densities and exhibited prolonged stability. Functioning as p‐type semiconductors, the Ce : Co3O4 nanoparticles not only boosted light absorption but also formed a p‐n heterojunction with the Ti‐doped hematite. This heterojunction generated a built‐in electric field that facilitated the separation and transfer of photogenerated carriers, thereby improving charge separation efficiency. Additionally, these nanoparticles expanded the active surface area of hematite and served as a co‐catalyst, markedly accelerating the OER kinetics. The Ce : Co3O4/Fe2O3 photoanode achieved an impressive photocurrent density of 1.08 mA cm−2 at 1.23 VRHE in acidic media, demonstrating its enhanced activity and stability.

Enhanced efficiency of interfacial charge transfer in Ag3PO4/BiPO4@CNTs photocatalyst for amoxicillin degradation: Synergistic effect of p-n heterojunction and conjugated channels

Inspired by the remarkable efficiency in separating photogenerated carriers achieved through the fabrication of conjugated polymeric photocatalysts, we have developed a novel photocatalytic system. This system utilizes carbon nanotubes coated with an Ag3PO4/BiPO4 p-n heterostructure (ABCx) for the degradation of amoxicillin in aquatic environments under visible light. The ABCx conjugated photocatalysts demonstrate excellent efficiency in photogenerated charge separation, material stability, and effective amoxicillin removal. The first-order kinetic constants for ABCx (x[‰]=2, 5, 7) show enhancements of 1.40-fold, 2.53-fold, and 2.10-fold, respectively, compared to those of Ag3PO4/BiPO4 in the degradation of amoxicillin. FT-IR and photochemical conversion studies reveal the presence of delocalized π-bonds within the conjugated system (P = CC = C···C = O), which can lead to the formation of a rapidly generated and long-lived triplet state T1 rather than the lowest singlet excited state S1 generated from either direct excitation or reverse intersystem crossing. In situ XPS analysis confirms that photogenerated charges migrate from BiPO4 to Ag3PO4 through a conjugated redox pathway. Density Functional Theory (DFT) was employed to investigate the work function, determining the Fermi levels of Ag3PO4 and BiPO4 to be -4.27 eV and -5.09 eV, respectively, and further confirming the direction of charge migration. In summary, the incorporation of conjugated π bonds via an inorganic semiconductor heterojunction enhances the efficiency of photogenerated charge separation and transport.

Optimizing Light Dynamics: Designing ANi-MOF Functionalized g-C3N4Type II Heterostructure and a Ti3C2 MXene Schottky Junction for Efficient Photocatalytic H2 Production.

The photocatalytic production of hydrogen (H2) from water is a vital avenue towards sustainable energy and addressing global environmental challenges. To maximize efficiency, harnessing the synergistic effects of multiple co-catalysts is essential, as these interactions can significantly enhance performance. In this study, we introduce a ternary heterojunction composed of a nickel-imidazole framework (Ni-MOF), graphitic carbon nitride (CN), and Ti3C2 MXene (TC), employing solvothermal and wet impregnation methods, featuring a well-designed Type II heterojunction and a noble metal-free Schottky junction for efficient hydrogen evolution. The Type II heterojunction between Ni-MOF and CN minimizes charge carrier recombination and promotes photogenerated electron generation, while TC as an electron acceptor enhances electron capture, increases participation in surface reactions, and augments active sites. Consequently, the Ni-MOF/CN/TC hybrid catalyst achieves outstanding photocatalytic hydrogen evolution under visible light, with a peak production rate of 1044.46 μmol/g over 3 hours, surpassing CN by 13 fold and Ni-MOF/CN by 50%. This work provides insights into MXene-based ternary systems, emphasizing the potential for enhanced light absorption and efficient charge separation, making it a promising platform for photocatalytic applications.

Modulating the electronic structure of macroporous SrTiO3 through cobalt doping for enhance photocatalytic hydrogen evolution

The modulation of electronic structure plays a crucial role in enhancing the adsorption of H* for photocatalytic hydrogen evolution. In this study, we prepared a three-dimensionally ordered macroporous structure of cobalt doping SrTiO3 (Co/3DOMSTO) to provide a large specific surface area that exposes more active sites. The prepared catalysts exhibited the highest rate of photocatalytic hydrogen evolution, reaching 5892.86 μmol g−1 h−1, along with an apparent quantum efficiency (AQE) of approximately 2.4% under illumination at 427 nm. Additionally, the introduction of metal cobalt helped to modulate the electronic structure of Co/3DOMSTO and facilitate spatial charge separation. X-ray absorption fine structure (XAFS) and density functional theory (DFT) calculations were conducted to demonstrate that cobalt occupied the Ti sites on the surface of 3DOMSTO, resulting in changes in the electronic distribution state within space. This phenomenon facilitates the enrichment of electrons at the adjacent Ti sites, making the charge-rich Ti a new active site. These findings underscore the pivotal role played by the geometric configuration and tailored electronic structure of 3DOMSTO in augmenting its photocatalytic performance.

Ultrasmall copper-metal organic framework (Cu-MOF) quantum dots decorated on waste derived biochar for enhanced removal of emerging contaminants: Synergistic effect and mechanistic insight

This study proposes a novel one-pot hydrothermal impregnation strategy for surface decoration of waste derived pisum sativum biochar with zero‒dimensional Cu‒MOF Quantum dots (PBC‒HK), with an average particle size of 5.67 nm, for synergistic removal of an emerging sulfur containing drug pantoprazole (PTZ) and Basic Blue 26 (VB) dye within 80 min and 50 min of visible-light exposure, respectively. The designed Integrated Photocatalytic Adsorbent (IPA) presented an enhanced PTZ removal efficiency of 95.23% with a catalyst loading of 0.24 g/L and initial PTZ conc. 30 mg/L at pH 7, within 80 min via synergistic adsorption and photodegradation under visible-light exposure. While, on the other hand, 96.31% VB removal efficiency was obtained in 50 min with a catalyst dosage of 0.20 g/L, initial VB conc. 60 mg/L at pH 7 under similar irradiation conditions. An in-depth analysis of the synergistic adsorption and photocatalysis mechanism resulting in the shortened time for the removal of contaminants in the synergistic integrated model has been performed by outlining the various advantageous attributes of this strategy. The first-order degradation rate constant for PTZ was found to be 0.04846 min−1 and 0.04370 min−1 for PTZ and VB, respectively. Adsorption of contaminant molecules on the biochar (PS‒BC) surface can facilitate photodegradation by accelerating the kinetics, and photodegradation promotes regeneration of adsorption sites, contributing to an overall reduction in operation time for removal of contaminants. Besides enhancing the adsorption of targeted pollutants, the carbon matrix of IPAs serves as a surface for adsorption of intermediates of degradation, thereby minimizing the risk of secondary pollution. The photogenerated holes present in the VB is responsible for the generation of •OH radicals. While, the photogenerated electrons present in the CB are captured by Cu2+ of the MOF metal center, reducing it to Cu+, which is subsequently oxidized to produce additional •OH species in the aqueous medium. This process leads to effective charge separation of the photogenerated charge carriers and minimizes the probability of charge recombination as evident from photoluminescence (PL) analysis. Meanwhile, PL studies, EPR and radical trapping experiments indicate the predominant role of •OH radicals in the removal mechanism of PTZ and VB. The investigation of the degradation reaction intermediates was confirmed by HR‒LCMS, on the basis of which the plausible degradation pathway was elucidated in detail. Moreover, effects of pH, inorganic salts, other organic compounds and humic acid concentration have been investigated in detail. The environmental impact of the proposed method was comprehensively evaluated by ICP-OES analysis and TOC and COD removal studies. Furthermore, the economic feasibility and the cost-effectiveness of the catalyst was assessed to address the potential for large scale commercialization. Notably, this research not only demonstrates a rational design strategy for the utilization of solid waste into treasure via the fabrication of IPAs based on MOF Quantum dots (QDs) and waste-derived biochar, but also provides a practical solution for real wastewater treatment systems for broader industrial applications.