Characterization Of Higher Order Structure Research Articles

Advancement of microfluidic modulation spectroscopy as a highly sensitive protein characterization technique for the detection of small structural changes

The higher order structure (HOS) of a protein is vital to its function and activity, making it a critical component in the development of protein-based therapeutics. Characterization of HOS can be performed using various biophysical techniques, but many of these methods have limitations such as low throughput, complicated workflow, narrow concentration range, and low sensitivity. Microfluidic Modulation Spectroscopy (MMS) is an emerging technology that addresses these limitations, offering high sensitivity and automated analysis for protein secondary structure. This study evaluates and compares the different well plate formats and scan modes of two MMS instruments. The newer Apollo system features a high throughput 96-well plate format and sweep scan mode that allows a 50% reduction in sample volume consumption and measurement time compared to the previous system. By measuring two proteins with drastically different secondary structures, the results demonstrated that the measurements were highly repeatable (>99% repeatability by area of overlap) regardless of the well plate formats or the scan modes. The limit of quantitation (LOQ) for determining structural impurity using the sweep scan mode was 3.2% and significantly better than that of FTIR at 23% from previous studies. This work highlighted the advancement of MMS as a highly sensitive technique to detect small changes of protein structures due to aggregation or misfolding.

Synthesis and Higher-order Structural Characterization of Polyimides Containing Chain-length-controlled Polysiloxanes

The synthesis of polyimides (PIs) containing polydimethylsiloxane (PDMS) with controlled chain length and the formation of higher-order structures were studied. Polycondensation was carried out using diphenyl-3,3',4,4'-tetracarboxylic dianhydride (BPDA) and diamine oligomers having amino groups on both ends of PDMS. The obtained poly(amic acid) (PAA) and PI showed good solubility in several common polar solvents while less soluble in non-protic amide polar solvents. The obtained bulk films of PI suggested forming a microphase-separated structure with domains based on PDMS and other aromatic moieties.

Native Top-Down Mass Spectrometry with Collisionally Activated Dissociation Yields Higher-Order Structure Information for Protein Complexes.

Native mass spectrometry (MS) of proteins and protein assemblies reveals size and binding stoichiometry, but elucidating structures to understand their function is more challenging. Native top-down MS (nTDMS), i.e., fragmentation of the gas-phase protein, is conventionally used to derive sequence information, locate post-translational modifications (PTMs), and pinpoint ligand binding sites. nTDMS also endeavors to dissociate covalent bonds in a conformation-sensitive manner, such that information about higher-order structure can be inferred from the fragmentation pattern. However, the activation/dissociation method used can greatly affect the resulting information on protein higher-order structure. Methods such as electron capture/transfer dissociation (ECD and ETD, or ExD) and ultraviolet photodissociation (UVPD) can produce product ions that are sensitive to structural features of protein complexes. For multi-subunit complexes, a long-held belief is that collisionally activated dissociation (CAD) induces unfolding and release of a subunit, and thus is not useful for higher-order structure characterization. Here we show not only that sequence information can be obtained directly from CAD of native protein complexes but that the fragmentation pattern can deliver higher-order structural information about their gas- and solution-phase structures. Moreover, CAD-generated internal fragments (i.e., fragments containing neither N-/C-termini) reveal structural aspects of protein complexes.

Native top-down mass spectrometry for higher-order structural characterization of proteins and complexes.

Progress in structural biology research has led to a high demand for powerful and yet complementary analytical tools for structural characterization of proteins and protein complexes. This demand has significantly increased interest in native mass spectrometry (nMS), particularly native top-down mass spectrometry (nTDMS) in the past decade. This review highlights recent advances in nTDMS for structural research of biological assemblies, with a particular focus on the extra multi-layers of information enabled by TDMS. We include a short introduction of sample preparation and ionization to nMS, tandem fragmentation techniques as well as mass analyzers and software/analysis pipelines used for nTDMS. We highlight unique structural information offered by nTDMS and examples of its broad range of applications in proteins, protein-ligand interactions (metal, cofactor/drug, DNA/RNA, and protein), therapeutic antibodies and antigen-antibody complexes, membrane proteins, macromolecular machineries (ribosome, nucleosome, proteosome, and viruses), to endogenous protein complexes. The challenges, potential, along with perspectives of nTDMS methods for the analysis of proteins and protein assemblies in recombinant and biological samples are discussed.

Higher-Order Structure Characterization of NKG2A/CD94 Protein Complex and Anti-NKG2A Antibody Binding Epitopes by Mass Spectrometry-Based Protein Footprinting Strategies.

NK group 2 member A (NKG2A), an immune checkpoint inhibitor, is an emerging therapeutic target in immuno-oncology. NKG2A forms a heterodimer with CD94 on the cell surface of NK and a subset of T cells and recognizes the nonclassical human leukocyte antigen (HLA-E) in humans. Therapeutic blocking antibodies that block the ligation between HLA-E and NKG2A/CD94 have been shown to enhance antitumor immunity in mice and humans. In this study, we illustrate the practical utilities of mass spectrometry (MS)-based protein footprinting in areas from reagent characterization to antibody epitope mapping. Hydrogen/deuterium exchange mass spectrometry (HDX-MS) in the higher-order structure characterization of NKG2A in complex with CD94 provides novel insights into the conformational dynamics of NKG2A/CD94 heterodimer. To fully understand antibody/target interactions, we employed complementary protein footprinting methods, including HDX-MS and fast photochemical oxidation of proteins (FPOP)-MS, to determine the binding epitopes of therapeutic monoclonal antibodies targeting NKG2A. Such a combination approach provides molecular insights into the binding mechanisms of antibodies to NKG2A with high specificity, demonstrating the blockade of NKG2A/HLA-E interaction.

Monitoring size and oligomeric-state distribution of therapeutic mAbs by NMR and DLS: Trastuzumab as a case study

Monoclonal antibodies (mAbs) are the modalities of choice for immunotherapy. This class of products are known to exhibit considerable heterogeneity with respect to size, aggregation states, and charge. This makes it challenging for biopharmaceutical manufacturers, in particular biosimilar producers, to maintain consistency in product quality. In order to fingerprint these biotherapeutic products, multiple, high-resolution analytical tools are used to characterize the numerous critical quality attributes. Recently, there has been growing interest in enhancing adaptability of 1D and 2D NMR platforms for characterization of higher order structure with emphasis on 1D 1H, 2D 1H-15N and 1H-13C NMR experiments at natural abundance. In this communication, we report the applicability of 2D-DOSY NMR for quantification of colloidal diffusivities, namely diffusion coefficient (and associated hydrodynamic radius) for monomeric IgG1 mAb formulations at physiological conditions. Similarity assessment has been performed for trastuzumab originator (multiple batches) and marketed biosimilars to showcase the applicability of this approach. While dynamic light scattering measurements are known to be sensitive to presence of larger particles with a concentration dependence for estimation of colloidal diffusivities, size estimated by NMR experiments was found to be more in agreement with the computational hydrodynamic size estimations derived from the published crystal structures of intact mAb at formulation concentration.

Higher-Order Structure Characterization of Pharmaceutical Proteins by 2D Nuclear Magnetic Resonance Methyl Fingerprinting

A key challenge in the analytical assessment of therapeutic proteins is the comprehensive characterization of their higher-order structure (HOS). To directly assess HOS, a new type of assay is warranted. The most sensitive and detailed method for characterizing HOS is unquestionably nuclear magnetic resonance (NMR) spectroscopy. NMR spectroscopy provides direct information about the HOS at an atomic level, and with modern NMR spectrometers and improved pulse sequences, this has become feasible even on unlabeled proteins. Hence, NMR spectroscopy could be a very powerful tool for control of HOS following, for example, process changes resulting in structural changes, oxidation, degradation, or chemical modifications. We present a method for characterizing the HOS of therapeutic proteins by monitoring their methyl groups using 2D H, C-correlated NMR. We use a statistical model that compares the NMR spectrum of a given sample to a reference and results in one output value describing how similar the HOS of the samples are. This makes the overall result easy to interpret even for non-NMR experts. We show that the method is applicable to proteins of varying size and complexity (here up to ∼30 kDa) and that it is sufficiently sensitive for the detection of small changes in both primary and HOS.

Quadrupole Dalton-Based Controlled Proteolysis Method for Characterization of Higher Order Protein Structure.

The higher order structure (HOS) of proteins plays a critical role in the efficacy and stability of biological drugs. Perturbation of the regional structure of proteins can affect biological activity and cause instability. Characterization of HOS has become an integral part of biological drug development and is expected from regulatory agencies. The commonly used techniques for HOS characterization, such as circular dichroism, Fourier-transform infrared, differential scanning calorimetry, intrinsic fluorescence, and hydrogen-deuterium exchange mass spectrometry, have their limitations ranging from lack of sensitivity and specificity to the need of high-level expertise and poor access to instrumentation due to high cost. In this study, we demonstrated a novel controlled proteolysis-based LC-QDa method for the detection of HOS change. By digesting proteins directly without denaturation and reduction, the HOS information can be revealed through the digested peptides. After optimizing the digestion conditions and the detection procedures, we identified 13 signature peptides that can monitor various antibody domains for any HOS changes caused by external stress. By comparing the peptide peak areas between unknown samples and a native control sample, any regional structural changes in unknown samples can be detected. The method was subsequently applied to a wide range of forced degradation samples to demonstrate higher sensitivity compared to the near-UV CD method that is frequently used for monitoring tertiary structural changes. By further reducing the number of signature peptides to five and optimizing liquid chromatography gradient duration, a streamlined, high-throughput, and controlled proteolysis method was successfully established. This method can be used to support process and formulation development as well as potentially for stability testing.

Technical Decision Making With Higher Order Structure Data: Perspectives on Higher Order Structure Characterization From the Biopharmaceutical Industry

Characterization of the higher order structure (HOS) of protein-based biopharmaceutical products is an important aspect of their development. Opinions vary about how best to apply biophysical methods, in which contexts to use these methods, and how to use the resulting data to make technical decisions as drug candidates are commercialized [Gabrielson JP, Weiss WF IV. J Pharm Sci. 2015;104(4):1240-1245]. The aim of this commentary is to provide guidance for the development and implementation of a robust and comprehensive HOS characterization strategy. We first consider important concepts involved in developing a strategy that is appropriately suited to a particular biologic, and then discuss ways industry can partner with academia, technology companies, government laboratories, and regulatory agencies to improve the consistency with which HOS characterization is applied across the biopharmaceutical industry.

An Opportunity for Industry–Academia Partnership: Training the Next Generation of Industrial Researchers in Characterizing Higher Order Protein Structure

Training researchers for positions in the United States biopharmaceutical industry has long been driven by academia. This commentary explores how the changing landscape of academic training will impact the industrial workforce, particularly with regard to the development of protein therapeutics in the area of biophysical and higher order structural characterization. We discuss how to balance future training and employment opportunities, how academic-industrial partnerships can help young scientists acquire the skills needed by their future employer, and how an appropriately trained workforce can facilitate the translation of new technology from academic to industrial laboratories. We also present suggestions to facilitate the coordinated development of industrial-academic educational partnerships to develop new training programs, and the ability of students to locate these programs, through the development of authoritative public resources.

Comparative higher-order structure analysis of antibody biosimilars using combined bottom-up and top-down hydrogen-deuterium exchange mass spectrometry

Hydrogen/deuterium exchange (HDX) coupled with mass spectrometry (MS) is a powerful technique for higher-order structural characterization of antibodies. Although the peptide-based bottom-up HDX approach and the protein-based top-down HDX approach have complementary advantages, the work done so far on biosimilars has involved only one or the other approach. Herein we have characterized the structures of two bevacizumab (BEV) biosimilars and compared them to the reference BEV using both methods. A sequence coverage of 87% was obtained for the heavy chain and 74% for the light chain in the bottom-up approach. The deuterium incorporation behavior of the peptic peptides from the three BEVs were compared side by side and showed no differences at various HDX time points. Top-down experiments were carried out using subzero temperature LC-MS, and the deuterium incorporation of the intact light chain and heavy chain were obtained. Top-down ETD was also performed to obtain amino acid-level HDX information that covered 100% of the light chain, but only 50% coverage is possible for the heavy chain. Consistent with the intact subunit level data, no differences were observed in the amino acid level HDX data. All these results indicate that there are no differences between the three BEV samples with respect to their high-order structures. The peptide level information from the bottom-up approach, and the residue level and intact subunit level information from the top-down approach were complementary and covered the entire antibody.

193 nm Ultraviolet Photodissociation Mass Spectrometry of Tetrameric Protein Complexes Provides Insight into Quaternary and Secondary Protein Topology.

Protein-protein interfaces and architecture are critical to the function of multiprotein complexes. Mass spectrometry-based techniques have emerged as powerful strategies for characterization of protein complexes, particularly for heterogeneous mixtures of structures. In the present study, activation and dissociation of three tetrameric protein complexes (streptavidin, transthyretin, and hemoglobin) in the gas phase was undertaken by 193 nm ultraviolet photodissociation (UVPD) for the characterization of higher order structure. High pulse energy UVPD resulted in the production of dimers and low charged monomers exhibiting symmetrical charge partitioning among the subunits (the so-called symmetrical dissociation pathways), consistent with the subunit organization of the complexes. In addition, UVPD promoted backbone cleavages of the monomeric subunits, the abundances of which corresponded to the more flexible loop regions of the proteins.

Characterization and Higher-Order Structure Assessment of an Interchain Cysteine-Based ADC: Impact of Drug Loading and Distribution on the Mechanism of Aggregation.

The impact of drug loading and distribution on higher order structure and physical stability of an interchain cysteine-based antibody drug conjugate (ADC) has been studied. An IgG1 mAb was conjugated with a cytotoxic auristatin payload following the reduction of interchain disulfides. The 2-D LC-MS analysis shows that there is a preference for certain isomers within the various drug to antibody ratios (DARs). The physical stability of the unconjugated monoclonal antibody, the ADC, and isolated conjugated species with specific DAR, were compared using calorimetric, thermal, chemical denaturation and molecular modeling techniques, as well as techniques to assess hydrophobicity. The DAR was determined to have a significant impact on the biophysical properties and stability of the ADC. The CH2 domain was significantly perturbed in the DAR6 species, which was attributable to quaternary structural changes as assessed by molecular modeling. At accelerated storage temperatures, the DAR6 rapidly forms higher molecular mass species, whereas the DAR2 and the unconjugated mAb were largely stable. Chemical denaturation study indicates that DAR6 may form multimers while DAR2 and DAR4 primarily exist in monomeric forms in solution at ambient conditions. The physical state differences were correlated with a dramatic increase in the hydrophobicity and a reduction in the surface tension of the DAR6 compared to lower DAR species. Molecular modeling of the various DAR species and their conformers demonstrates that the auristatin-based linker payload directly contributes to the hydrophobicity of the ADC molecule. Higher order structural characterization provides insight into the impact of conjugation on the conformational and colloidal factors that determine the physical stability of cysteine-based ADCs, with implications for process and formulation development.

Correction to On the Analytical Superiority of 1D NMR for Fingerprinting the Higher Order Structure of Protein Therapeutics Compared to Multidimensional NMR Methods

An important aspect in the analytical characterization of protein therapeutics is the comprehensive characterization of higher order structure (HOS). Nuclear magnetic resonance (NMR) is arguably the most sensitive method for fingerprinting HOS of a protein in solution. Traditionally, 1H–15N or 1H–13C correlation spectra are used as a “structural fingerprint” of HOS. Here, we demonstrate that protein fingerprint by line shape enhancement (PROFILE), a 1D 1H NMR spectroscopy fingerprinting approach, is superior to traditional two-dimensional methods using monoclonal antibody samples and a heavily glycosylated protein therapeutic (Epoetin Alfa). PROFILE generates a high resolution structural fingerprint of a therapeutic protein in a fraction of the time required for a 2D NMR experiment. The cross-correlation analysis of PROFILE spectra allows one to distinguish contributions from HOS vs protein heterogeneity, which is difficult to accomplish by 2D NMR. We demonstrate that the major analytical limitation of tw...

On the Analytical Superiority of 1D NMR for Fingerprinting the Higher Order Structure of Protein Therapeutics Compared to Multidimensional NMR Methods.

An important aspect in the analytical characterization of protein therapeutics is the comprehensive characterization of higher order structure (HOS). Nuclear magnetic resonance (NMR) is arguably the most sensitive method for fingerprinting HOS of a protein in solution. Traditionally, (1)H-(15)N or (1)H-(13)C correlation spectra are used as a "structural fingerprint" of HOS. Here, we demonstrate that protein fingerprint by line shape enhancement (PROFILE), a 1D (1)H NMR spectroscopy fingerprinting approach, is superior to traditional two-dimensional methods using monoclonal antibody samples and a heavily glycosylated protein therapeutic (Epoetin Alfa). PROFILE generates a high resolution structural fingerprint of a therapeutic protein in a fraction of the time required for a 2D NMR experiment. The cross-correlation analysis of PROFILE spectra allows one to distinguish contributions from HOS vs protein heterogeneity, which is difficult to accomplish by 2D NMR. We demonstrate that the major analytical limitation of two-dimensional methods is poor selectivity, which renders these approaches problematic for the purpose of fingerprinting large biological macromolecules.

Technical Decision Making with Higher Order Structure Data: Higher Order Structure Characterization During Protein Therapeutic Candidate Screening

Protein therapeutics differ considerably from small molecule drugs because of the presence of higher order structure (HOS), post-translational modifications, inherent molecular heterogeneity, and unique stability profiles. At early stages of development, multiple molecular candidates are often produced for the same biological target. In order to select the most promising molecule for further development, studies are carried out to compare and rank order the candidates in terms of their manufacturability, purity, and stability profiles. This note reports a case study on the use of selected HOS characterization methods for candidate selection and the role of HOS data in identifying potential challenges that may be avoided by selecting the optimal molecular entity for continued development.

Subzero temperature chromatography and top-down mass spectrometry for protein higher-order structure characterization: method validation and application to therapeutic antibodies.

Characterization of the higher-order structure and structural dynamics of proteins is crucial for in-depth understanding of their functions. Amide hydrogen/deuterium exchange (HDX), monitored by mass spectrometry (MS), is now a popular technique for measuring protein higher-order structural changes. Although the proteolysis-based HDX-MS approach is most commonly used, the "top-down" approach, which fragments intact proteins directly using electron-based dissociation, is becoming an important alternative and has several advantages. However, the commonly used top-down strategies are direct-infusion based and thus can only be used with volatile buffers. This has meant that the "top-down" approach could not be used for studying proteins under physiological conditions-the very conditions which are often very important for preserving a protein's native structure and function. More complex proteins such as those with disulfide bonds present another challenge. Therefore, there is significant interest in developing novel top-down HDX methods that are applicable to all types of protein samples. In this paper, we show how top-down electron capture dissociation and subzero temperature HPLC can be combined and used for this purpose. This method keeps the back-exchange level as low as 2% and has no limitations in terms of protein type and sample solution conditions. Close to single-residue level protein structural information can be generated. The new method is validated through comparison with NMR data using calmodulin as a model protein. Its capability of determining structural changes in therapeutic antibodies (Herceptin) is also demonstrated.

Capillary electrophoresis for analysis of microheterogeneous glutelin subunits in rice (Oryza sativa L.)

Glutelin, the major storage protein of rice seed, consists of microheterogenous subunits and partially exists in a macromolecular form that is polymerized by intersubunit disulfide bonds. In order to analyze the glutelin subunits using high-throughput CE, we first identified a sample preparation procedure suitable for CE. The polymerized glutelin treated with a reductant could not dissociate into its constituent monomer subunits when it was dissolved in an acidic solution. However, the glutelin dissociated into its subunits and component α and β polypeptides when it was denatured and reduced by an appropriate amount of urea and 2-mercaptoethanol at a specific incubation time and temperature. The molecular species of the completely dissociated α and β polypeptides were identified and quantitatively analyzed by CE using glutelin mutants. The CE analysis also demonstrated that the actual subunit variation in terms of the charge and/or size of the β polypeptides is much smaller than predicted when compared with that of α polypeptides, even under denaturing and reducing condition. Thus, the combined analytical system described here will be useful for basic and applied research, such as the kinetic characterization of higher-order structure and the quantitative evaluation of glutelin in a large number of diverse rice varieties.

Characterization of Higher-Order Structure of Poly(ethylene-2,6-naphthalate) Treated with Supercritical Carbon Dioxide

We have prepared poly(ethylene-2,6-naphthalate) (PEN) films having higher-order structure with fine crystallites using a supercritical carbon dioxide (scCO2) treatment technique at a relatively low-temperature range, from 110 to 170 °C. After the scCO2 treatment, the glass transition temperature Tg decreased by more than 50 °C, and the PEN films were crystallized. Long-term change in the FT-IR absorbance intensity at 2335 cm-1 (CO) was in good agreement with the change in Tg. The large decrease in Tg was attributed to the sorption of the CO2 molecules into the PEN film. Moreover, the increase in the treatment pressure increased the amount of absorbed CO2 and reduced Tg, which can promote crystallization. The higher-order structure, long period, lamella, and interface thickness of the crystallized PEN films were calculated from the one-dimensional correlation function by SAXS. These parameters were all linearly related to the treatment temperature. The crystallite size obtained from the Scherrer equation d...

Studies of biomolecular conformations and conformational dynamics by mass spectrometry

In the post-genomic era, a wealth of structural information has been amassed for proteins from NMR and crystallography. However, static protein structures alone are not a sufficient description: knowledge of the dynamic nature of proteins is essential to understand their wide range of functions and behavior during the life cycle from synthesis to degradation. Furthermore, few proteins have the ability to act alone in the crowded cellular environment. Assemblies of multiple proteins governed by complex signaling pathways are often required for the tasks of target recognition, binding, transport, and function. Mass spectrometry has emerged over the past several years as a powerful tool to address many of these questions. Recent improvements in "soft" ionization techniques have enabled researchers to study proteins and biomolecular complexes, both directly and indirectly. Likewise, continuous improvements in instrumental design in recent years have resulted in a dramatic expansion of the m/z range and resolution, enabling observation of large multi-protein assemblies whose structures are retained in the gas phase. In this article, we discuss some of the mass spectrometric techniques applied to investigate the nature of the conformations and dynamical properties that govern protein function.