Characterization Of Airborne Particulate Matter Research Articles

Characterization of airborne particulate matter and its toxic and proarrhythmic effects: A case study in Aburrá Valley, Colombia

Particle matter (PM) is a complex mixture of particles suspended in the air, mainly caused by fuel combustion from vehicles and industry, and has been related to pulmonary and cardiovascular diseases. The Metropolitan Area of Aburrá Valley in Colombia is the second most populous urban agglomeration in the country and the third densest in the world, composed of ten municipalities. Examining the physicochemical properties of PM is crucial in comprehending its composition and its effects on human health, as it varies based on the socioeconomic dynamics specific to each city. This study characterized the PM collected from the north, south, and central zones to evaluate its chemical composition and morphology. Different elements such as silicon, carbon, aluminum, potassium, calcium, sodium, iron, magnesium, and copper and the presence of unburned fuel, motor oil, and silicon fibers were identified. In vitro and in silico studies were conducted to evaluate the toxicity of the PM, and it was found that the PM collected from the central zone had the greatest impact on cell viability and caused DNA damage. The in silico study demonstrated that PM has concentration-dependent proarrhythmic effects, reflected in an action potential duration shortening and an increased number of reentries, which may contribute to the development of cardiac arrhythmias. Overall, the results suggest that the size and chemical composition of ambient PM can induce toxicity and play an important role in the generation of arrhythmias.

Characterization of atmospheric aerosols in the Antarctic region using Raman Spectroscopy and Scanning Electron Microscopy

The non-destructive spectroscopic characterization of airborne particulate matter (PM) was performed to gain better knowledge of the internal structures of atmospheric aerosols at the particle level in the Antarctic region, along with their potential sources. PM and soil samples were collected during the 2016–2017 austral summer season at the surroundings of the Spanish Antarctic Research Station “Gabriel de Castilla” (Deception Island, South Shetland Islands). PM was deposited in a low-volume sampler air filter. Raman spectroscopy (RS) and Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (SEM-EDS) were used to determine the elemental and molecular composition of the individual aerosol and soil particles. Filter spectra measured by these techniques revealed long-range atmospheric transport of organic compounds (polystyrene and bacteria), local single and cluster particles made of different kinds of black carbon (BC), exotic minerals (polyhalite, arcanite, niter, ammonium nitrate, syngenite and nitrogen, phosphorus, and potassium (NPK) fertilizer), and natural PM (sea salts, silicates, iron oxides, etc.). In addition to the filter samples, forsterite and plagioclase were discovered in the soil samples together with magnetite. This is the first report of the presence of a microplastic fiber in the Antarctic air. This fact, together with the presence of other pollutants, reflects that even pristine and remote regions are influenced by anthropogenic activities.

Physicochemical Characterization of Airborne Particulate Matter in Medellín, Colombia, and its Use in an In Silico Study of Ventricular Action Potential

Particulate matter (PM) is a complex mixture of particles that changes over time and from place to place; however, most PM is caused by the fuel combustion of motor vehicles and industry. PM is associated with acute and chronic illnesses, such as pulmonary and cardiovascular diseases. Medellin is one of the most polluted cities in Latin America. Therefore, the physicochemical characterization of its PM is necessary to understand its composition and effect on human health. In this study, PM was characterized by scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDS) analysis, Fourier infrared spectroscopy (FTIR), inductivity-coupled plasma optical emission spectrometry (ICP-OES), and thermogravimetric analysis (TGA) in order to evaluate its morphology and chemical composition. The SEM of the PM exhibited primary particles and agglomerates. The size of the particles ranged between 0.056 and 4.5 μm. The EDS revealed elements such as carbon, silicon, calcium, lead, and iron. Furthermore, carbon monoxide, carbon dioxide, and carbonyl and aliphatic functional groups were observed by means of FTIR. Additionally, weight losses associated with volatile matter and elemental carbon were identified in the TGA analysis. The TGA and FTIR confirmed the presence of fuel and lubricant traces. Subsequently, lead was selected among the most common components in the PM in order to conduct an in silico study into its effect on ventricular activity. Lead showed a pro-arrhythmic effect by shortening the duration of the action potential under normal electrophysiological conditions, which could be associated with cardiovascular diseases.

Size distribution and single particle characterization of airborne particulate matter collected in a silicon carbide plant.

The global SiC market is projected to grow in the coming years, and research on potential health effects as well as epidemiological studies is therefore of importance. A detailed characterization in terms of the phase composition, morphology and mixing state of airborne PM is still missing, though highly necessary to identify sources and to understand the risk factors in this industry. Particles in the size range of 10 nm to 10 µm were collected with a 13-stage NanoMOUDI impactor in the Acheson Furnace Hall as well as in processing departments during two sampling campaigns. Particle mass concentrations, including the fraction of ultrafine particles (UFPs), were lower in the processing departments in comparison to those in the Acheson Furnace Hall. The particle number size distribution measured with a scanning mobility particle sizer confirmed the low amount of UFPs in the processing departments compared to the furnace hall. Significant differences in the particle mass concentration and distribution were observed in the Acheson Furnace Hall during the two sampling campaigns. The PM size distribution depends upon the sampling location, on the cycle of the nearby furnaces and on special incidents occurring during a furnace run. Scanning and transmission electron microscopy (SEM and TEM) showed that the size range of 0.32-10 µm (aerodynamic diameter) is dominated by carbon (C)-rich particles, which were identified as petroleum coke, graphite, soot and amorphous spherical C-rich particles. Soot was further classified into three types based on the primary particle size, morphology and composition. Diesel-powered vehicles, pyrolysis of petroleum coke and incomplete combustion of volatile components from this pyrolysis are suggested as sources of different soot particle types. Amorphous spherical C-rich particles were also sub-classified based on their morphology and composition as tar balls (TBs) and C-spherical type 2. The amount of SiC fibers and crystalline SiO2 was found to be low. In the size fraction below 0.32 µm (aerodynamic diameter), sulphur (S)-rich particles dominate. This knowledge of the particle size distribution, and chemical and physical properties of the PM occurring in the SiC production is fundamental for an appropriate risk assessment, and these findings should have implications for future epidemiological studies and for the mitigation of worker exposure.

Real-Time Measurements and Characterization of Airborne Particulate Matter from a Primary Silicon Carbide Production Plant.

Airborne particulate matter in the silicon carbide (SiC) industry is a known health hazard. The aims of this study were to elucidate whether the particulate matter generated inside the Acheson furnace during active operation is representative of the overall particulate matter in the furnace hall, and whether the Acheson furnaces are the main sources of ultrafine particles (UFP) in primary SiC production. The number concentration of ultrafine particles was evaluated using an Electrical Low Pressure Impactor (ELPITM, Dekati Ltd., Tampere, Finland), a Fast Mobility Particle Sizer (FMPSTM, TSI, Shoreview, MN, USA) and a Condensation Particle Counter (CPC, TSI, Shoreview, MN, USA). The results are discussed in terms of particle number concentration, particle size distribution and are also characterized by means of electron microscopy (TEM/SEM). Two locations were investigated; the industrial Acheson process furnace hall and a pilot furnace hall; both of which represent an active operating furnace. The geometric mean of the particle number concentration in the Acheson process furnace hall was 7.7 × 104 particles/cm3 for the UFP fraction and 1.0 × 105 particles/cm3 for the submicrometre fraction. Particulate matter collected at the two sites was analysed by electron microscopy. The PM from the Acheson process furnace hall is dominated by carbonaceous particles while the samples collected near the pilot furnace are primarily rich in silicon.

Characterization of airborne particulate matter and microbes inside cultural heritage collections

Abstract Measurements of airborne particulate matter mass concentration, mass size distribution, chemical speciation and microbial levels were performed in two museums and a library in Greece over a two-year period. The three cultural heritage sites were located in different environments [coastal (Heraklion), urban (Athens) and mountainous (Zagori)], and their collections consist mainly of organic materials. Particulate mass size distribution measurements (PM10) (cut-off diameters at 10, 9, 5.8, 4.7, 3.3, 2.1, 1.1, 0.7 and 0.4 μm) were performed inside the museums in conjunction with measurements of viable, cultivable microorganisms in air (heterotrophic bacteria, autotrophic chemolithotrophic bacteria, bacteria with metabolizing capabilities for exhibited organic materials, gelatin hydrolyzing bacteria, acid producing bacteria and fast growing fungi). The particulate matter measurements showed a variability, which was related to outdoor particle concentrations, indoor environmental conditions, infiltration rates and to indoor activities. The PM2.1 fraction of the PM10 mass had a value close to 0.6 indicating a significant outdoor origin. Chemical analysis (ions, carbonaceous material and metals) of particulate matter revealed that ions and organic carbon comprised the major part of the particle mass. Elevated concentrations of Fe, Al-rich and soluble particles were measured indoors in the three sites. An enrichment of bacteria with metabolizing capabilities for bone, parchment, woolen fabric, gelatin, and cellulose was encountered indoors in the cultural heritage sites studied as well as inside closed showcases. An indication of seasonal variations of the airborne microbial load was observed in the three cultural heritage collections. In addition, there were differences in the measured microbial load, indoors, inside the showcases and outdoors.

Microbial and size characterization of airborne particulate matter collected on sticky tapes along US–Mexico border

Particulate matter (PM) emissions from various sources can affect significantly human health and environmental quality especially in the Chihuahuan Desert region along US–Mexico border. The objective of this study was to use the low-cost sticky tape method to collect airborne PM for size characterization and identification of fungal spores. Sticky tape samplers were placed at 1.0 and 2.0m above the ground surface at experimental sites in Ciudad Juárez, Mexico and at 0.6, 1.2 and 1.8m at New Mexico sites, USA. Soil samples were collected in both countries to determine fungal diversity, texture and moisture content. Dust particles collected from all of the experimental sites had a dominant texture of clay (<0.002mm). The dominant textures identified from soil samples collected from the US and Mexican sites were loam and sandy clay loam, respectively. Alternaria, Penicillium and Fusarium were frequently found funguses in the US sites while Alternaria and Aspergillus were commonly observed in the Mexican sites. The sticky tapes also showed a similar diversity of fungal microorganisms present in the airborne PM at both Mexico and US sites. Alternaria, Penicillium and Aspergillus were the three groups of airborne fungal microorganisms consistently present in the US and Mexican sites. The low-cost sticky tape method has the potential to be used for characterizing different airborne microorganisms and dust particles.

Elemental characterization of urban particulates at receptor locations in Abuja, north-central Nigeria

The rising population and increasing urban infrastructures of Abuja have led to increased pressure on the urban environment. Two decades after putting the city of Abuja to use, there is yet no information on the air quality status of the city. Hence, this study was conducted in order to assess the mass concentration and elemental characterization of airborne particulate matter in Abuja, north-central Nigeria. Sampling of PM2.5: aerodynamic diameter ≤2.5 μm and PM10: aerodynamic diameter ≤10 μm were carried out in five urban sites within the city from April, 2009 to May, 2010. "Gent" stacked filter unit sampler equipped with a double stage filters in series was employed for sample collection. Charged helium (4He+) Particle Induced X-ray Emission technique of 2500 keV particle energy and Genie 2000 software were used for spectra acquisition while elemental characterization was achieved using Gupixwin software in order to determine the concentration of eighteen elements (Si, S, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd, Sn, Ba, Ta and Pb). Mass concentrations range between 7–86 μg m−3 and 22–343 μg m−3 for PM2.5 and PM10 respectively. Crustal elements (Si, Ca, and Fe) were found to be predominant in PM10 than in PM2.5 fraction with very high values. Positive correlation r > 0.90 and r > 0.53 to 0.90 exist between metals (V, Co, Ni, Cd, Zn and Pb). PM2.5/PM10 mass ratios were well within the range specified by WHO for developing urban scenario.

Physicochemical Characterization of Airborne Particulate Matter at a Mainline Underground Railway Station

Underground railway stations are known to have elevated particulate matter (PM) loads compared to ambient air. As these particles are derived from metal-rich sources and transition metals may pose a risk to health by virtue of their ability to catalyze generation of reactive oxygen species (ROS), their potential enrichment in underground environments is a source of concern. Compared to coarse (PM10) and fine (PM2.5) particulate fractions of underground railway airborne PM, little is known about the chemistry of the ultrafine (PM0.1) fraction that may contribute significantly to particulate number and surface area concentrations. This study uses inductively coupled plasma mass spectrometry and ion chromatography to compare the elemental composition of size-fractionated underground PM with woodstove, roadwear generator, and road tunnel PM. Underground PM is notably rich in Fe, accounting for greater than 40% by mass of each fraction, and several other transition metals (Cu, Cr, Mn, and Zn) compared to PM from other sources. Importantly, ultrafine underground PM shows similar metal-rich concentrations as the coarse and fine fractions. Scanning electron microscopy revealed that a component of the coarse fraction of underground PM has a morphology indicative of generation by abrasion, absent for fine and ultrafine particulates, which may be derived from high-temperature processes. Furthermore, underground PM generated ROS in a concentration- and size-dependent manner. This study suggests that the potential health effects of exposure to the ultrafine fraction of underground PM warrant further investigation as a consequence of its greater surface area/volume ratio and high metal content.

Fifteen years of nuclear techniques application to suspended particulate matter studies

Acute and chronic exposures to Airborne Particulate Matter (APM) have been linked, in epidemiological studies, to increased mortality and to a wide spectrum of respiratory and cardiovascular disorders. One factor that highly influences the toxicity of APM is its chemical composition. Nuclear Analytical Techniques (NATs) can be advantageously used in the determination of the particles element composition due to their multielement capability in association with low detection limits. Therefore, the characterization of APM by these techniques contributes to the identification of emission sources and, consequently, to the assessment of the effectiveness of the current air pollution abatement strategies. The main goal of this paper was to present the achievements obtained within 15 years of activities related with the use of NATs on the analysis of APM sampled in outdoor, indoor and industrial environments. The results presented in this work confirmed the relevance of NATs as efficient analytical techniques not only in the characterization of APM, but also in source apportionment, identification of long range transport and health assessment studies.

Characterization of airborne particulate matter collected at Jakarta roadside of an arterial road

A total of 44 pairs of airborne particulate matter samples were collected in the intersection of Simprug, Pondok Indah, South Jakarta. Sampling of airborne particulate matter was conducted in July 2008–July 2009 using a Gent stacked filter unit sampler in two size fractions of <2.5 µm (fine) and 2.5–10 µm (coarse). Mass concentrations, black carbon as well as elemental concentrations were investigated as a pre-study in step to the evaluation of air quality in these roadside areas. Black carbon was determined by reflectance and elemental analysis was performed using proton induced X-ray emission, PIXE. The data set of fine particulate matters obtained from the characterization was then analyzed using receptor modeling EPA PMF3 for source apportionment. Source apportionment identified 5 factors, i.e. soil (9.2 %), construction mixed with road dust (20.9 %), motor vehicles (31.5 %), biomass burning mixed with seasalt (30.9 %), and industry (7.5 %). Motor vehicles is the dominant sources that contributes to the fine particulate matter in Jakarta.

Size-resolved comprehensive characterization of airborne particulate matter

An update of a methodology to extract both the size-segregated source apportionment of atmospheric aerosol and the size distribution of each detected element or compound, is presented. The approach is based on the parallel use of standard low-volume samplers to collect particulate matter (PM) and of an Optical Particle Counter (OPC). The methodology was introduced and validated in previous works for the average size distribution of elemental components of PM: it has now been extended to PM compounds such as ions and carbonaceous aerosol (namely, organic end elemental carbon, OC and EC). Furthermore, the methodology has been now adopted in the frame of a field campaign, proving that it is able to provide not only an average size distribution but also information on the time evolution of the size distribution of specific PM species. Samples were collected in the urban area of Genoa (Italy) and their composition was measured by Energy Dispersive X-ray Fluorescence (ED-XRF), Ion Chromatography (IC) and Thermo-optical analysis. Positive Matrix Factorization (PMF) was applied to time series of daily concentration values in PM10 and PM2.5 (i.e. fraction of PM mass with aerodynamic diameter lower that 10 μm and 2.5 μm, respectively) to identify major PM sources, and both PM mass concentration and size-segregated particle number concentration were apportioned. Seven and six sources were respectively resolved in PM10 and PM2.5, with processes related to secondary aerosol formation accounting for about 53% and 57% of PM levels in the two fractions. The new methodology is complementary to size-segregated PM sampling, and it was actually tested against a 13-stage nanoMOUDI cascade impactor. Size distributions obtained with the new methodology and directly measured by the nanoMOUDI turned out to be in good agreement (R2 > 0.60) with discrepancies observed for SO42− only.

YEAR-ROUND BEHAVIOR FOR INORGANIC COMPOSITION OF SIZE-RESOLVED AIRBORNE PARTICLES IN HIMEJI CITY, JAPAN

As a part that, an epidemiological study on the effects of physicochemical characterization of airborne particulate matter (PM) and ozone on asthma attacks, we carried out size-resolved sampling of PM in Himeji City, and elemental and ionic composition analyses of the PM sample. Size-resolved PM was collected using a 3-stage NLAS impactor (Tokyo Dylec Co., Ltd.; particle cut size at sampling stages was 10, 2.5 and 1.0 μm for a flow rate of 3 L/min) with a one-week base sampling interval, and the PM sampling was begun in November, 2009. Concentrations of several elemental and ionic species in the PM sample were determined by PIXE and ion chromatography analysis, respectively. The research results are important for the physicochemical characterization of PM in atmosphere, enabling detailed analysis of the year-round behavior. Of particular note, is that the PM10 was mainly NO3- and SO42- and PM2.5 was only SO42-. This is believed to suggest the different formation processes of NO3- and SO42-.

Analytical Methods INAA and PIXE Applied to Characterization of Airborne Particulate Matter in Bandung, Indonesia

Urbanization and industrial growth have deteriorated air quality and are major cause to air pollution. Air pollution through fine and ultra-fine particles is a serious threat to human health. The source of air pollution must be known quantitatively by elemental characterization, in order to design the appropriate air quality management. The suitable methods for analysis the airborne particulate matter such as nuclear analytical techniques are hardly needed to solve the air pollution problem. The objectives of this study are to apply the nuclear analytical techniques to airborne particulate samples collected in Bandung, to assess the accuracy and to ensure the reliable of analytical results through the comparison of instrumental neutron activation analysis (INAA) and particles induced X-ray emission (PIXE). Particle samples in the PM 2.5 and PM 2.5-10 ranges have been collected in Bandung twice a week for 24 hours using a Gent stacked filter unit. The result showed that generally there was a systematic difference between INAA and PIXE results, which the values obtained by PIXE were lower than values determined by INAA. INAA is generally more sensitive and reliable than PIXE for Na, Al, Cl, V, Mn, Fe, Br and I, therefore INAA data are preffered, while PIXE usually gives better precision than INAA for Mg, K, Ca, Ti and Zn. Nevertheless, both techniques provide reliable results and complement to each other. INAA is still a prospective method, while PIXE with the special capabilities is a promising tool that could contribute and complement the lack of NAA in determination of lead, sulphur and silicon. The combination of INAA and PIXE can advantageously be used in air pollution studies to extend the number of important elements measured as key elements in source apportionment. Received: 20 November 2010; Revised: 09 August 2011; Accepted: 15 August 2011

Multielemental Characterization of Airborne Particulate Matter Collected in Bucharest and Tokushima by Inductively Coupled Plasma Mass Spectrometry and Inductively Coupled Plasma Atomic Emission Spectrometry

Airborne particulate matter (PM) collected in Bucharest (Romania) and Tokushima (Japan) was comprehensively characterized through multielemental analysis by ICP-MS to the PM samples. Prior to an elemental characterization of the sample, a multielemental determination method composed of acid digestion (HClO(4)/HNO(3)/HF or H(2)O(2)/HNO(3)/HF) and inductively coupled plasma mass spectrometry/inductively coupled plasma atomic emission spectrometry (ICP-MS/ICP-AES) was established to analyze a certified reference material of vehicle exhaust matter (NIES No. 8) for verifying the method. As the results, 39 elements in the certified reference material could be determined. They were a good agreement with the certified and reference values for HClO(4)/HNO(3)/HF acid digestion. Chalcophile elements, such as cadmium, antimony, and lead in Bucharest showed higher enrichment factors than those in Tokushima.

Particulate matter emission by a vehicle running on unpaved road

The particulate matter (PM) emission from unpaved roads starts with the pulverization of surface material by the force of the vehicle, uplifting and subsequent exposure of road to strong air currents behind the wheels. The objectives of the project were to: demonstrate the utility of a simple technique for collecting suspended airborne PM emitted by vehicle running on an unpaved road, determine the mass balance of airborne PM at different heights, and determine the particle size and elemental composition of PM. We collected dust samples on sticky tapes using a rotorod sampler mounted on a tower across an unpaved road located at the Leyendecker Plant Sciences Research Center, Las Cruces, NM, USA. Dust samples were collected at 1.5, 4.5 and 6m height above the ground surface on the east and west side of the road. One rotorod sampler was also installed at the centre of the road at 6m height. Dust samples from unpaved road were mostly (70%) silt and clay-sized particles and were collected at all heights. The height and width of the PM plume and the amount of clay-sized particles captured on both sides of the road increased with speed and particle captured ranged from 0.05 to 159μm. Dust particles between PM10 and PM2.5 did not correlate with vehicle speed but particles ⩽PM2.5 did. Emission factors estimated for the total suspended PM were 10147gkm−1 at 48kmh−1 and 11062gkm−1 at 64kmh−1 speed, respectively. The predominant elements detected in PM were carbon, aluminum and silica at all heights. Overall, sticky tape method coupled with electron microscopy was a useful technique for a rapid particle size and elemental characterization of airborne PM.

A new methodological approach: The combined use of two-stage streaker samplers and optical particle counters for the characterization of airborne particulate matter

We describe a new experimental methodology based on the contemporary use of two-stage continuous streaker samplers and optical particle counters. This is a complementary approach to size-segregated particulate matter (PM) sampling, and it is able to give information on the elemental size distribution and to assess the contribution of major PM source to size bins. PM samples in the fine and coarse fraction of PM10 have been collected by a two-stage streaker sampler and analyzed by particle-induced X-ray emission (PIXE) to obtain elemental concentration time series with hourly resolution. PM sources and profiles were singled out by positive matrix factorization (PMF). A multi-linear regression of size-segregated number of particles versus the sources, resolved by PMF, made possible the apportionment of size-segregated particles number in a fast and direct way. Results obtained in three sampling sites, located in different urban districts are discussed.

Chemical Characterization of Airborne Particulate Matter in Ambient Air of Nagoya, Japan, as Studied by the Multielement Determination with ICP-AES and ICP-MS

The multielement determination of PM(10) (airborne particulate matter smaller than 10 microm) samples, which was collected by a high volume air sampler at the urban site of Nagoya City, was carried out by inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). The present analytical method was validated by analyzing urban particulate matter standard reference material of NIST SRM 1648. The analytical data for ca. 30 elements in PM(10) samples collected during a period from 8 September to 9 October, 2003, were obtained in the concentration range from sub-microg g(-1) to several-10 mg g(-1), but the data for 18 elements among ca. 30 elements were available for the characterization of PM(10) samples in ambient air, because of problems caused by the filter blanks. Then, the trends concerning the distributions of diverse elements in PM(10) samples were analyzed based on the enrichment factors and size distribution factors. The lithophile and siderophile elements were distributed more than 50% in coarse particle fraction (>2.1 microm), which was derived mainly from natural sources, such as soils and crustal minerals. On the other hand, chalcophile elements were distributed more than 50% in fine particle fraction (<2.1 microm), which was derived mostly from anthropogenic emission sources. The large enrichment of chalcophile elements in PM(10) samples as well as their mining influence factors (MIFs) suggested their wide use in industrial productions.

Characterization of airborne particulate matter in an industrial district near Florence by PIXE and PESA

AbstractThe composition of airborne particulate matter in Montelupo Fiorentino (a small town about 20 km west of Florence characterized by the presence of a large number of ceramic and glass factories) was studied by means of continuous and sequential sampling, ion beam analysis (IBA) techniques and statistical methods. The aerosol PM10 fraction was collected on a daily basis for about 9 months (September 2002–June 2003). To investigate the elemental size distribution, for a shorter period (about 3 weeks) we collected PM10, PM2.5 and PM1 simultaneously. A continuous streaker sampler was also used, which allows the study of the aerosol composition with 2 h time resolution. Mass concentrations were obtained using an analytical balance. The elemental analysis was performed at the INFN accelerator laboratory at the Physics Department of Florence University by particle‐induced x‐ray emission and particle elastic scattering analysis (the latter implemented for this campaign). The use of the two techniques allowed a complete reconstruction of the gravimetric mass. An absolute principal component analysis showed industrial sources to be, on average, the main contributors to PM10 mass; however, the weight of the ‘soil’ source (connected to local soil re‐suspension and to long‐range Saharan transport episodes) becomes dominant during some of the days when the 50 µg m−3 limit is exceeded. Copyright © 2005 John Wiley &amp; Sons, Ltd.

INAA for the characterization of airborne particulate matter from the industrial area of Islamabad city

Air particulate matter (PM) was collected in two size fractions using stacked filter units (SFUs) provided by the International Atomic Energy Agency (IAEA) from the industrial area of Islamabad. Nucleopore polycarbonate filters were used for collecting from Oct 98 to Jun 99 the particulate matter in coarse and fine size fractions. The samples were characterized by the instrumental neutron activation analysis (INAA). About 33 elements were quantified using different irradiation and counting protocols.