Characteristics Of Airfoil Research Articles

On the Origin of Görtler Vortices in Flow over a Multi-Element Airfoil

The flow characteristics of a 30P30N three-element high-lift airfoil at low Reynolds numbers O104 are examined through three-dimensional simulations using a high-order spectral element method. This study primarily investigates the flow structures of the slat cove and Görtler vortices formed on the upper surface of the main airfoil. Spanwise instability grows exponentially in the slat cove with a constant wavelength, corresponding to that of the subsequently formed Görtler vortices. Görtler number calculations show that curvature-induced centrifugal instability at the slat cusp leads to the subsequent formation of Görtler vortices. Proper orthogonal decomposition (POD) is used to analyze the development of flow structures in the slat cove in different time ranges. At early time, the flow in the slat cove is dominated by shear layers that evolve into spanwise perturbations. These perturbations further evolve into distinct bell-shaped structures close to the slat cusp and are advected to the upper surface of the main airfoil, leading to the formation of Görtler vortices.

Aerodynamic performance characteristics of low Re airfoils: A parametric and multi criteria decision study

This research aims at investigating the aerodynamic performance of 51 low Re airfoils and applying a Multi Criteria Decision Making (MCDM) approach for selecting airfoils that align with the specific requirements of small wind turbines (SWTs). The study was carried out by varying the Re from 5 × 104 to 5 × 105; angle of attack (AOA) from −10° to 20°, thickness to chord ratio (0.1–0.9), camber ratio (0.1–0.9), and camber position (10 %–80 %) to evaluate the impact of these parameters on the airfoils’ performance. Furthermore, MCDM approach was applied to identify suitable airfoils optimized for their average lift to drag ratio, stall angle, operating range of AOA, strength, manufacturability, and material cost. The findings showed that of the teste parameters, the AOA and airfoil profile have the most pronounced effects on the airfoil performance. Among the tested airfoils, the E63 provided superior performance at 105 Re with LDR of 76.32, a 37.7 % improvement over that of NACA 4412 which is commonly used for wind turbine blade design. Furthermore, the MCDM results revealed that SG6043, FX63-137, E216 and E62 airfoils were the top-ranked airfoils suitable for SWTs application. These findings can help to produce optimized airfoil designs for increased performance and efficiency of SWTs.

Effect of plasma excitation on aerodynamic characteristics of airfoil under Martian conditions

Due to the low density and pressure of the Martian atmosphere, the aerodynamic performance of the airfoil of the Mars UAV needs to be further improved. Plasma excitation active flow control technology is used to improve the lift of the airfoil and reduce the drag of the airfoil under Martian conditions. The effects of the action position, excitation power and incoming flow angle of attack on the lift and drag of the airfoil are studied under the low Reynolds number conditions on Mars. The results show that plasma excitation increases lift in the trailing edge area of the lower surface, with a maximum lift increase rate 37%; reduces drag in the leading edge area of the lower surface, with a maximum drag reduction rate 8%; the greater the excitation power and the smaller the incoming flow angle of attack, the more obvious the improvement of the airfoil lift-to-drag ratio. Plasma excitation induces pressure waves, forming a pressurization zone and a decompression zone upstream and downstream of the excitation, respectively, resulting in the formation of a pressurization surface and a decompression surface on the airfoil surface. When the excitation position is close to the trailing edge, the pressurization surface expands, and the pressure difference between the upper and lower surfaces of the airfoil increases, thereby achieving lift increase; when the excitation position is close to the leading edge, the decompression surface expands, and the pressure difference drag of the airfoil decreases, thereby achieving drag reduction.

Aerodynamic characteristics of airfoils with fractal structures in low-Reynolds-number regime

Aerodynamic characteristics of airfoils with fractal structures in low-Reynolds-number regime

Numerical Investigation of Wind Turbine Airfoil Icing and Its Influencing Factors under Mixed-Phase Conditions

Icing is a popular research area in wind energy, and the icing problem of the supercooled droplet–ice crystal mixed-phase condition is one of the new challenges. A numerical method for analyzing the icing characteristics of wind turbine airfoil under mixed-phase conditions is presented. The control equations for the dynamics of supercooled droplets and ice crystals are formulated using the Lagrangian method. Equations for the conservation of mass and energy during the icing process involving supercooled droplets and ice crystals are constructed. The impact of erosion phenomena on the mixed-phase icing process is examined, and methodologies for solving the control equations are introduced. The numerical method is utilized for modeling mixed-phase icing under a range of conditions. The results of these simulations are then compared with data obtained from icing wind tunnel tests to assess the validity of the method. The influence of various mixed-phase conditions on ice shapes is studied. It is found that higher icing temperatures correspond to a larger icing range and amount. The increase in supercooled droplet content, ice crystal content, and ice crystal diameter all contribute to enhanced ice accretion. However, the effects of ice crystal content and diameter are relatively minor.

Numerical study on transonic shock wave buffeting of airfoil

Abstract Modern transportation aircraft typically cruise at transonic speeds. However, under a specific combination of incoming flow Mach numbers and angles of attack, periodic self-excited oscillations of shock waves can lead to unsteady aerodynamic loads, causing sustained vibrations in the aircraft, which is known as transonic shock wave buffeting. Buffeting loads significantly impact the fatigue life of the aircraft’s structural materials and its handling performance. In severe cases, it causes structural damage or even leads to flight safety incidents, so we should pay more attention to transonic shock wave buffeting when focusing on aeronautical engineering. This paper employs computational fluid dynamics technology for calculations to solve the Navier-Stokes equations, using the SST k-ω turbulence model to numerically simulate the steady flow field, and further employing the detached eddy simulation (DES) method to study and analyze the buffeting initiation mechanism and flow field characteristics of the NACA0012 airfoil’s transonic unsteady flow. By applying the DES method, the results demonstrate an accurate prediction of the buffeting onset boundary of the airfoil compared to wind tunnel experimental data. The research findings on the initiation mechanism and load characteristics of transonic buffeting provide a theoretical basis for optimizing the aerodynamic performance of aircraft during transonic flight and offer guidance for engineering issues such as buffeting load mitigation.

تعزيز الخصائص الديناميكية الهوائية عن طريق تعديالت سطح الجنيح

The enhancement of the aerodynamic characteristics of the NACA0012 airfoil is studied numerically. ANSYS Fluent is used to simulate the airfoil's performance by applying certain surface modifications in the form of dimples and protrusions. Different shapes were used, namely, semicircular, v-shaped and square. Analysis has been done on an airfoil of 1m chord length with these modifications, which were implemented on the upper surface of a twodimensional airfoil model and placed at 75% of chord length. A comparative study of surfacemodified airfoil models was done to investigate lift and drag for a constant at Re = 3.0E6 at various angles of attack and compare them with smooth airfoils. The results reveal that the aerodynamic characteristics were improved by applying surface modifications, and the flow separation on the airfoil can be delayed by using dimples and protrusions on the upper surface. It was found that the semicircular dimples and v-shaped bumps have the best aerodynamic enhancement, where the lift coefficient was improved by 11% and 9% compared to smooth airfoils, respectively, while the drag coefficients were reduced by 3% for both shapes. Also, based on these surface-modified airfoil analyses, the stall angle was increased by two degrees. In comparison, the semicircular dimples are more suitable for enhancing the performance characteristics of airfoils.

Effects of Wind Speed and Heat Flux on De-Icing Characteristics of Wind Turbine Blade Airfoil Surface

The icing on wind turbines reduces their aerodynamic performance and can cause other safety issues. Accordingly, in this paper, the de-icing characteristics of a wind turbine blade airfoil under different conditions are investigated using numerical simulation. The findings indicate that when the de-icing time is 10 s, the peak ice thickness on the leading edge of the airfoil surface decreases from 0.28 mm to 0.068 mm and from 0.77 mm to 0.45 mm at low (5 m/s) and high (15 m/s) wind speeds, respectively. This is due to the fact that the ice melting rate is much greater than the icing rate at low wind speeds, while the icing rate increases at high wind speeds. When the de-icing time is 20 s, ice accretion on the leading edge of the airfoil is completely melted. At a low heat flux (8000 W/m2) and high heat flux (12,000 W/m2), the peak ice thickness decreases by 31.2% and 64.9%, respectively. With an increase in de-icing time and heat flux, the peak thickness of runback ice increases. This is due to an increase in runback ice as a result of more ice melting on the leading edge of the airfoil. The surface temperature in the ice-free area is significantly higher than that in the ice-melting area, due to high thermal resistance in the ice-free area. This study will provide guidance for the thermal distribution and coating layout of a wind turbine blade airfoil to make the anti-/de-icing technology more efficient and energy-saving.

Effect of trailing-edge blowing on the acoustic and aerodynamic characteristics of a flatback airfoil

This study investigated the impact of trailing-edge uniform air blowing on the acoustic and aerodynamic characteristics of a flatback airfoil. Near- and far-field pressure fluctuations, surface static pressure distribution, as well as boundary layer and wake flow measurements were conducted to comprehensively understand the effects of the method on both the noise generation mechanism and the aerodynamic characteristics of the airfoil. It was revealed that tonal noise originates from surface pressure fluctuations induced by upstream flow disturbances due to vortex shedding. The application of blowing was found to shift large-scale vortices generated during vortex shedding further downstream, resulting in the suppression of surface pressure fluctuations on both the pressure and suction sides of the airfoil, consequently reducing far-field noise. Additionally, blowing enhanced spanwise coherence at the vortex shedding frequency. In terms of aerodynamic behavior, blowing was shown to increase base pressure, leading to drag reduction without affecting lift. Interestingly, the significant drag reduction was found to occur at the same blowing parameter associated with maximum tonal noise reduction.

Modeling two-dimensional ice shape based on fractal interpolation

The ice accretion data obtained from ice wind tunnel tests reveal a multiscale structure and rough surface. In the follow-up aerodynamic evaluation of icing airfoils, simplified two-dimensional ice shapes are generally used as substitutes, but this simplification changes the aerodynamic effects of the original ice shape. Therefore, finding a simple and effective two-dimensional ice shape simulation method is urgent. Due to the self-similarity characteristics of ice shape surfaces, fractal interpolation is proposed for ice shape simulation. First, the geometric characteristics of the ice shapes are analyzed to determine interpolation points, and an iterative function system is constructed for interpolation simulation. Considering the influence of various characteristics of ice shapes on aerodynamics, interpolation parameters are limited to simulating more realistic ice shapes. High-order numerical simulation methods were utilized to numerically simulate and analyze the aerodynamic characteristics of icing airfoil while also verifying the feasibility of fractal interpolation for simulating ice shapes. The analysis revealed that this method could effectively simulate ice profiles of various feature scales with minimal ice shape data. These simulated shapes closely resemble real ice formations and maintain the original aerodynamic characteristics of the icing airfoil. This method can be used to improve the computational accuracy of ice accretion codes and provide improvement strategies for complex ice shape prediction; thus, this method has great application prospects in engineering.

Effect of leading-edge protuberances on swept wing aircraft performance

Stall is a complex phenomenon in aircraft that must be suppressed during flight. As a novel passive control method, bionic leading-edge protuberances (LEPs) have attracted widespread interest, particularly for delaying stall. Bionic protuberances at the leading edge of airfoils have been designed to control stall and increase the stability of unmanned aerial vehicles during operation, and it is the flow control mechanism associated with this application that is investigated in this study. First, numerical simulations are conducted to obtain the aerodynamic characteristics of original and bionic airfoils based on the S1223 large-lift airfoil. Next, the impact of the LEP amplitude is investigated. Finally, a vortex definition parameter, the Liutex vector, is utilized to analyze the influence of LEPs on vortices. The results show that bionic LEPs inspired by those on humpback whale flippers can improve the aerodynamic performance of airfoils under the extreme conditions that exist after stall, resulting in an ∼22% increase in the lift–drag ratio. LEPs are found to segment the flow field near the wing surface. The flow becomes bounded between adjacent protuberance structures, significantly inhibiting the development of flow separation and providing a drag reduction effect. This study thus provides a new approach for improving aircraft performance.

Effects of Leading Edge Radius on Stall Characteristics of Rotor Airfoil

The effects of leading edge radius on the static and dynamic stall characteristics of rotor airfoils are investigated. Initially, a parametric airfoil (PARFOIL) method is employed to generate four morphed airfoils with different leading edge radii based on a NACA 0012 airfoil. Subsequently, the Reynolds-averaged Navier–Stokes (RANS) method is employed to simulate the aerodynamic characteristics of static airfoils, while the improved delayed detached-eddy simulation (IDDES) method is employed for pitching airfoils. The effectiveness and accuracy of the computational fluid dynamics (CFD) methods are demonstrated through favorable agreement between the numerical and experimental results. Finally, both the static and dynamic aerodynamic characteristics are simulated and analyzed for the airfoils with varying leading edge radii. Comparative analyses indicate that at low Mach numbers, the high adverse pressure gradient near the leading edge is the primary cause of leading edge separation and stall. A larger leading edge radius helps to reduce the suction pressure peak and adverse pressure gradients, thus delaying the leading edge separation and stall of airfoil. At high Mach numbers, the leading edge separation and stall are mainly induced by the shock wave. Variations in leading edge radius have minimal impacts on the high adverse pressure gradient induced by the shock wave, thus making the stall characteristics of airfoils almost unaffected at high Mach numbers.

Numerical two-dimensional optimization of a cylindrical fuselage for bioinspired unmanned aerial vehicle based on non-dominated sorting genetic algorithm-II

To achieve an aerodynamically efficient design of fuselage for bioinspired unmanned aerial vehicles (UAV), the development of a systematic method is of paramount need. This work presents a multiobjective optimization study for shape parameterization of a 2D fuselage of foldable flapping wing UAV in low Reynolds number (2e05) flight conditions. The novelty of the research work lies in integrating S1223 airfoil characteristics for predicting the efficient shape design of the fuselage. This paper offers four sections; (i) the validation of the ANSYS Fluent model with experiment, (ii) the exploration of design variables using Design of Experiment (Sparse Grid Initialization), (iii) the implementation of response surface method (Genetic Aggregation) to know about dimensional sensitivity among independent and dependent variables and (iv) the application of multiobjective optimization method i.e. NSGA II to optimize the drag and lift coefficient. To identify the superiority, a comparative study between the original and optimized fuselage is presented considering many parameters like pressure contours, velocity contours, pressure coefficients, and streamlines representations. It is evident from various results that the 2D optimum shape significantly minimizes the drag coefficient and increases the lift coefficient. This work also makes room for 3D shape optimization, which helps in prototype fabrication for real-time flight conditions.

Dynamic wake behavior and aerodynamic characteristics of a custom airfoil under combined pitching and heaving motion

Dynamic wake behavior and aerodynamic characteristics of a custom airfoil under combined pitching and heaving motion

Investigating 3-D Flow Characteristics of Wind Turbine Airfoils using Delayed Detached Eddy Simulations at High Reynolds Numbers

This numerical study investigates the 3-D flow field and aerodynamic characteristics of DU 00-W-212 wind turbine airfoil at high Reynolds numbers. The Computational Fluid Dynamics (CFD) simulations are performed at Reynolds number of 3 million at three different angles of attack for the pre-stall, stall, and post-stall conditions, by using an open source CFD solver SU2. The Delayed Detached Eddy Simulations (DDES) with the Spalart-Allmaras (SA) turbulence model and Langtry-Menter (LM) transition model are performed to address the challenge of predicting unsteady flow characteristics with transition, particularly on the suction side of the airfoil. The 3-D DDES with SA results with and without LM transition model are compared with the 2-D RANS with SA simulations and available experimental data.

Improved performance of k − ω SST turbulence model in predicting airfoil characteristics for a wide range of airfoil thicknesses

A variety of airfoils designed for wind turbine rotor blade applications were simulated with k − ω shear stress transport (SST) turbulence model in its standard form, the k − ω SST turbulence model with a modified a 1 constant (referred to as the a 1 method), the Spalart-Allmaras turbulence model, and the panel method XFoil. To assess their performance, the results of airfoil lift, drag, and coefficient of pressure were compared against available wind tunnel data, where available. The standard k −ω SST turbulence model is found to over-predict Reynolds shear stresses, delay the flow separation, and under-predict the separated-flow region on the airfoil’s suction side. Airfoil thicknesses between 11% and 36% of the chord length were studied. Using a modified a 1 constant, some airfoils exhibited up to a 20% improvement in the prediction of lift and drag coefficients within the post-stall range of angle of attack (AoA). It is important to note that the a 1 method’s applicability and effectiveness is specifically tested for airfoils, and its performance is highly dependent on the airfoil geometry.

Numerical analysis of static and dynamic wind turbine airfoil characteristics in transonic flow

This study performed an aerodynamic characterization of the FFA-W3-211 wind turbine tip airfoil in transonic flow using Unsteady Reynolds-Averaged Navier-Stokes (URANS) simulations, for both steady and dynamic operational conditions. First, the boundary between subsonic and supersonic flow in static conditions was identified, depending on the angle of attack, the approach flow Mach number, and the Reynolds number. The analysis points out that higher Reynolds numbers promote the occurrence of local supersonic flow. Thereafter, to investigate the dynamic behavior in the transonic flow regime, a sinusoidal pitching motion with representative values was imposed. A hysteresis, similar to but distinct from dynamic stall, was observed for entering and leaving the supersonic and subsonic regions. Elevated reduced frequencies widened the hysteresis loop, resulting in increased normal forces on the airfoil. The study indicated that an increase in reduced frequency leads to an earlier onset of transonic flow. In conclusion, the risk of transonic flow occurring during normal operation of the next generation wind turbines predicted in earlier studies could be corroborated. Moreover, dynamic effects and Reynolds number dependencies can be significant.

Stall characteristics of wavy leading-edge airfoil in subsonic and transonic airflows

Based on the bioinspired wavy leading-edge, the stall characteristics of the NACA0012 airfoil are optimized. In this paper, the semicircle plus line segment is used to obtain the wavy leading edge. The aerodynamic forces of the airfoil are measured by a high-precision balance, and the detailed flow features of the airfoil are obtained by the oil flow tests. Then, combined with numerical simulation, the optimization mechanism is obtained. The operating conditions are as follows: Mach number ranging from 0.4 to 0.8, and angle of attack ranging from −4° to 25°. The results show that in high speed airflows, compared with the basic airfoil, the lift coefficient of the wavy leading-edge airfoil does not decrease sharply with the increase of the angle of attack, and the drag coefficient of the wavy leading-edge airfoil is similar to the basic airfoil; among the three types of airfoils studied, the larger wavy leading-edge feature size has better aerodynamic characteristics; combined with the numerical simulation results, it can be seen that the stall mechanism of airfoils varies at different Mach numbers. The wavy leading-edge generate streamwise vortex. The streamwise vortices increase energy transport in the boundary layer. Therefore, the separation zone moves toward the trailing edge of the airfoil, and the stall characteristics of the airfoil are optimized.

Wall-modeled large eddy simulation of a tandem wing configuration in transonic flow

In this study, the interaction between a turbulent wake and the boundary layer of a horizontal tail plane (HTP) in the transonic flow regime is investigated. The setup considered corresponds to a generic tandem wing configuration with an OAT15A airfoil as the main wing and a National Advisory Committee for Aeronautics (NACA) 64A-110 as an HTP. Due to the transonic flow, the suction side of the OAT15A exhibits buffet. The numerical approach consists of a two-stage procedure in which a detached eddy simulation (DES) provides unsteady inflow conditions for a subsequent zonal high-fidelity large eddy simulation (LES) performed for the HTP region only; the turbulent boundary layer is modeled using scale-resolved wall-modeled LES (WMLES). The study mainly pursues two objectives: first, to discuss the influence of wake turbulence on the flow characteristics of the NACA airfoil; and second, to evaluate the capability of WMLES as a low-cost but high-resolution numerical approach in challenging flow conditions. Essentially, the study confirms the expected result that the outer part of the HTP's boundary layer is dominated by the wake of the main wing. Mainly based on a discussion of turbulence spectra, the study further demonstrates the advantage of WMLES over DES, proving that WMLES is able to capture the effects of wake turbulence on boundary layer dynamics, and thus validates the WMLES approach as a cost-effective, high-resolution turbulence modeling approach. On a superordinate level, the study further sketches a possible way on how a flow problem with such a strongly unsteady behavior could be systematically evaluated.

Analysis of a tensegrity camber morphing airfoil

This study presents a novel tensegrity camber morphing airfoil (TenCMA), which has the ability of the large and smooth camber morphing. The configuration of TenCMA is determined by the error bound method. The optimal configuration of TenCMA is obtained by comparing the aerodynamic characteristics of TenCMA and traditional airfoil. Based on the beam-tensegrity dynamics, the shape control law of TenCMA is presented to control the camber morphing, whereas the force in strings are the control variables. The optimal actuator selection method is derived by the positive spanning set to select the minimum number of actuators and give the optimal control energy of TenCMA. The results of shape control show that TenCMA can smoothly change the trailing edge with the optimal selected actuators and minimum control energy. Finally, we compared the aerodynamic characteristics of TenCMA and traditional airfoil with the same equivalent deflection angle. Results show that TenCMA can significantly improve the aerodynamic performance of the morphing airfoil.