Channel-lobe Transition Zone Research Articles

Coarse-grained submarine channels: from confined to unconfined flows in the Colombian Caribbean (late Eocene)

Submarine channel mouth settings are hardly preserved in the stratigraphic record. Although they are still poorly known with respect to other segments of turbidite systems, conceptual models are being refined in the light of new discoveries in modern and ancient examples. Still, some questions such as the transition between expansion zones and the traditional Channel-Lobe Transition Zone (CLTZ) remains open in ancient systems. Upper Eocene deposits of the Colombian Caribbean (San Jacinto Fold Belt) are interpreted here as a fan-delta-fed, submarine, coarse-grained channel-lobe system. It displays a well-preserved channel inception stage in the shelf break represented by sigmoidal to lens-shaped gravels, and planar cross-stratified pebbly sandstones (foreset and backset) interpreted as cyclic steps in an expansion zone. In a later stage, a classical channel-levee complex was developed, represented by channel fill elements showing sharp- and erosional-based, fining-upward sequences that are meters thick, having basal massive matrix-supported pebble conglomerates (hard—extrabasinal—clasts, rip-up clasts, coastal bioclasts), vertically evolving to liquefied massive to planar-laminated coarse-grained sandstones with phytodetrital carbonaceous laminae. They are interpreted as concentrated flow deposits (high-density turbidites) coming from continental areas or from coastal systems (i.e., delta reworking). Undifferentiated channel belt thin-bedded turbidites associated with levees and terraces deposits are related to these confined systems. The channel-lobe transition zone is characterized by debrites from cohesionless debris flow in a channel-mouth bar setting, representing bypass processes that developed distally into low-angle, planar cross- and sigmoidally-stratified (upstream antidune) pebble-size to coarse-grained sandstones that fill low-angle scours (cut-and-fill structures) in an antidune field setting with supercritical conditions. When the currents lose channel confinement, the setting is characterized by changes from Froude supercritical to subcritical flow conditions in an inner lobe to lobe off-axis environment. Large seasonal fluctuations in precipitation favor high sediment concentrations, promoting the formation of volumetrically significant fan deltas and coarse-grained submarine channels with high erosive capacity; therefore, their record helps refine interpretations of depositional processes, providing criteria for recognizing areas of the turbiditic systems that are hardly preserved. The particular aggradational conditions for the preservation and stratigraphic characterization of the rare exhumed submarine channel mouth systems make it possible to decipher sediment dispersal patterns and thus connect the models proposed here, from supercritical systems to the traditional models of turbiditic systems.

The response of high density turbidity currents and their deposits to an abrupt channel termination at a slope break: Implications for channel–lobe transition zones

ABSTRACTThe transition between the slope and basin floor is typically marked by a slope break, in some cases causing channels to terminate and turbidity currents to undergo a loss of confinement. It is thus essential to understand how these slope breaks and losses of confinement influence the hydrodynamic evolution of turbidity currents and impact their depositional variability within natural scale channel mouth settings. Flume experiments, utilizing Shields scaling, are conducted to study how channel slope angle (3°, 6° and 9°) and initial suspended sediment concentrations (12 to 18% by volume) impact the hydrodynamics and deposit geometries of high density turbidity currents, subject to a simultaneous break of slope and loss of confinement. Measured velocity and concentration profiles indicate that turbidity currents are supercritical, with mean velocities between 0.80 m s−1 and 1.04 m s−1 and depth‐averaged basal concentrations between 9.2% and 23.9%, yielding bed shear velocities between 0.050 m s−1 and 0.064 m s−1. Upon encountering the slope break and loss of confinement, turbidity currents exhibit increases to their densimetric Froude numbers and shear velocities. This is due primarily to two factors: firstly, turbidity currents continue to accelerate during an initial period of velocity lag as their residual momentum gradually dissipates; and, secondly, expansion via flow relaxation collapses their structure towards the bed. The corresponding depositional geometries of these processes reveal that turbidity currents produce elongate channel–lobe transition zones that disconnect channel and basin deposits. The length to width ratios of channel–lobe transition zones decrease as the initial sediment concentrations of turbidity currents increase, while a reduction in the channel slope break angle reduces their length to width ratios. Corresponding, lobe elements are observed to increase in length, width and thickness with increasing initial sediment concentrations, while a reduction in channel slope break angle reduces their dimensions due to enhanced slope deposition.

Architecture, formation and implication of active structure‐controlled intraslope channel system southeast offshore Sendai, Tohoku, Japan

AbstractLocated off the Pacific coast of central Tohoku (NE Japan), the Ishinomaki slope channel (ISC) provides an excellent opportunity to study a structure‐controlled intraslope channel and downslope sedimentation along the active margin. The seismic reflection data across ISC show an extensive basal surface and overlying channel complexes between the basement structures of the Abukuma ridge to the south and Kitakami massif to the north, indicating that the formation of the intraslope basin, channelization of ISC and sedimentation of the downstream channel‐lobe transition zone (CLTZ) are very likely to be structure‐controlled. The oblique channel stacking pattern, faulting of the seafloor and subsurface Abukuma ridge in the upper and lower domains of ISC, collectively suggest that ISC has migrated northward and is currently under the influence of active compression. Differences in styles of accommodation space between the upper and lower domains of ISC suggest that differential subsidence occurred along the strike‐slip tectonic line. Based on the regional strike‐slip tectonic line, we propose that a Kitakami‐Abukuma ridge existed before the formation of ISC. The strike‐slip faulting divided the Kitakami‐Abukuma ridge into the Kitakami massif to the north and the Abukuma ridge to the south, and an intervening fault trough as the precursor of the intraslope basin and ISC. As the subduction of the Pacific Plate and associated compressional events continued, the Abukuma ridge was reactivated to narrow the intraslope basin into a confined channel. Located near the epicentre of the devastating 2011 Tohoku earthquake event, the ISC, downstream CLTZ and underlying intraslope basin provide information on active basement structure and the evolving sediment routing system on the tectonically active margin.

Reconstructing sedimentary processes in a Permian channel–lobe transition zone: an outcrop study in the Karoo Basin, South Africa

AbstractTurbidity currents commonly bypass sediment in submarine channels on the continental slope, and deposit sediment lobes farther down-dip on the flat and unconfined abyssal plain. Seafloor and outcrop data have shown that the transition from bypass to deposition usually occurs over complex zones referred to as channel–lobe transition zones (CLTZs). Recognition of these zones in cores and outcrop remains challenging due to a lack of characteristic sedimentary facies and structures. This paper focuses on Unit E of the Permian Fort Brown Formation in the Karoo Basin, South Africa, in the Slagtersfontein outcrop complex, which has previously been interpreted as a CLTZ. This study integrates thin-section micrographs, sedimentary facies, bed-set and stratigraphic architecture, and palaeoflow directions to achieve a multiscale analysis of CLTZ features. A novel process-based facies scheme is developed to evaluate deposits in terms of the depositional or erosional tendencies of the flows that formed them. This scheme allows bypass to be distinguished from depositional zones by the spatial distribution of certain sediment facies. Areas of net sediment bypass were predominantly marked by erosive sediment facies and a larger variability in palaeoflow direction while depositional areas showed a lower variability in palaeoflow directions. Metre-scale structures in the bypass-dominated area reveal seafloor erosion and scour formation. Field relations suggest the presence of a ∼500 m long mega-scour in the CLTZ. The characteristic structures documented here are applicable for identifying CLTZs in sparse datasets such as outcrops with limited palaeogeographical context and sediment cores obtained from subsurface systems.

Submarine Channel Mouth Settings: Processes, Geomorphology, and Deposits

Observations from the modern seafloor that suggest turbidity currents tend to erode as they lose channel-levee confinement, rather than decelerating and depositing their sediment load, has driven investigations into sediment gravity flow behaviour at the mouth of submarine channels. Commonly, channel mouth settings coincide with areas of gradient change and play a vital role in the transfer of sediment through deep-water systems. Channel mouth settings are widely referred to as the submarine channel-lobe transition zone (CLTZ) where well-defined channel-levees are separated from well-defined lobes, and are associated with an assemblage of erosional and depositional bedforms (e.g., scours and scour fields, sediment waves, incipient channels). Motivated by recently published datasets, we reviewed modern seafloor studies, which suggest that a wide range of channel mouth configurations exist. These include traditional CLTZs, plunge pools, and distinctive long and flared tracts between channels and lobes, which we recognise with the new term channel mouth expansion zones (CMEZs). In order to understand the morphodynamic differences between types of channel mouth settings, we review insights from physical experiments that have focussed on understanding changes in process behaviour as flows exit channels. We integrate field observations and numerical modelling that offer insight into flow behaviours in channel mouth settings. From this analysis, we propose four types of channel mouth setting: 1) supercritical CMEZs on slopes; 2) plunge pools at steep slope breaks with high incoming supercritical Froude numbers; 3) CLTZs with arrays of hydraulic jumps at slope breaks with incoming supercritical Froude numbers closer to unity; and, 4) subcritical CLTZs associated with slope breaks and/or flow expansion. Identification of the stratigraphic record of channel mouth settings is complicated by the propagation, and avulsion, of channels. Nonetheless, recent studies from ancient outcrop and subsurface systems have highlighted the dynamic evolution of interpreted CLTZs, which range from composite erosion surfaces, to tens of metres thick stratigraphic records. We propose that some examples be reconsidered as exhumed CMEZs.

Depositional elements and evolution of gravity-flow deposits on Lingshan Island (Eastern China): An integrated outcrop-subsurface study

Understanding how subaqueous sediment gravity flows (SSGF) evolve in time and space, and how their deposits vary spatially, is a key research focus for gravity flow sedimentology. This study investigates depositional facies, depositional elements, and sediment transport processes of supercritical flows and hybrid event beds (HEBs) of the Lingshandao Formation in Lingshan Island, Eastern China. Three kinds of depositional elements were recognized: mass transport deposits (MTDs), channel-lobe transition zone (CLTZs), and lobe complexes. MTDs can be sub-divided into proximal and distal deposits. CLTZs are characterized by facies changes from massive coarse-grained pebbly sandstone to backset bedding sandstone in a down-slope direction, which are the deposits of supercritical turbidity currents. HEBs are common in both proximal and distal lobe settings. Tripartite structure in HEBs, which may be caused by up-slope substrate erosion, implies a relatively proximal origin compared with bipartite HEBs, perhaps caused by fluid fractionation in the research area. The succession is formed by a prograding lobe unit, followed by MTDs which are themselves overlain by deposits from a CLTZ. This vertical stacking pattern implies the potential longitudinal facies tract from CLTZ; to lobe complex deposits, is accompanied by emplacement of MTDs at the slope break. The flow types accompanied by sediment transport processes imply that erosion by supercritical turbidity currents associated with a hydraulic jump in the channel-lobe transition zone may be the main reason for mud-clasts and matrix addition to the flow. The large-scale addition of mud-clasts and suspended mud may dampen turbulence in proximal to medial lobe settings, and result in medium-to thick-bedded HEBs with common erosional features and tripartite structures. The remaining suspension flow (with abundant mud) may further transport down-dip and form medium-to thin-bedded HEBs with bipartite structures and rare mud-clasts. These findings may be applicable to other SSGF systems with supercritical flow deposits and hybrid event beds, emphasizing the downdip and lateral variation in depositional elements associated with gravity flow evolution.

Depositional Model for Turbidite Lobes in Complex Slope Settings Along Transform Margins: The Motta San Giovanni Formation (Miocene—Calabria, Italy)

Intraslope lobes, or perched lobes, are attracting scientific interest because they represent a key archive between the shelf and the deep basin plain when looking at a complete source-to-sink depositional system across a continental margin and can form significant offshore hydrocarbon plays. In this study, we focus on a detailed characterization of intraslope lobes of the Motta San Giovanni Formation (Miocene, Calabria), which were deposited in confined conditions during the Miocene along a transform margin. We determine the typical facies associations and stratigraphic architecture of these intraslope lobes using a 3D digital outcrop model resulting from a combined Uncrewed Aerial Vehicle (UAV) and walking acquisition, together with sedimentological logging and geological mapping. We propose recognition criteria for the identification of intraslope lobes, including facies and geometries, integrated within a depositional model. A comparison with other well-known intraslope and confined lobes, as well as basin floor lobes, is finally discussed, to highlight the peculiarities of intraslope lobes deposited along transform margins. The diagnostic depositional model for these types of intraslope lobes includes four main stages of evolution: 1) Stage 1—isolated detached lobe precursor in response to a flushed hydraulic jump, 2) Stage 2—prograding and aggrading lobe elements associated with a relatively stable and submerged hydraulic jump in the Channel-Lobe Transition Zone (CLTZ), 3) Stage 3—major bypass associated with lateral accretion and local aggradation interpreted as a renewal of a normal hydraulic jump in the CTLZ, and 4) Stage 4—erosion and bypass then abandonment. The development of intraslope lobes along active transform margins is allowed by tectonically induced slope segmentation and local confinement. In such a context, flow stripping and overspill processes occurred. Resulting lobes appear to be particularly small and relatively thin sandy deposits. They could be considered end-member in a lobe classification based on the Net-to-Gross content (high) and taking into account their thickness/width ratio (intermediate between 10:1 and 100:1 lines).

Sole marks reveal deep-marine depositional process and environment: Implications for flow transformation and hybrid-event-bed models

ABSTRACTDeposits of sediment gravity flows in the Aberystwyth Grits Group (Silurian, west Wales, United Kingdom) display evidence that sole marks are suitable for reconstructing depositional processes and environments in deep-marine sedimentary successions. Based on drone imagery, 3D laser scanning, high-resolution sedimentary logging, and detailed descriptions of sole marks, an outcrop 1600 m long between the villages of Aberarth and Llannon was subdivided into seven lithological units, representing: a) mudstone-poor, coarse-grained and thick-bedded submarine channel fills, dominated by the deposits of erosive high-density turbidity currents with flute marks; b) mudstone-rich levee deposits with thin-bedded, fine-grained sandstones formed by low-density turbidity currents that scoured the bed to form flute marks; c) channel–lobe transition-zone deposits, dominated by thick beds, formed by weakly erosive, coarse-grained hybrid events, with pronounced mudstone-rich or sandstone-dominated debritic divisions and groove marks below basal turbiditic divisions, and with subordinate amounts of turbidites and debris-flow deposits; d) tabular, medium- to thick-bedded turbiditic sandstones with flute marks and mixed sandstone–mudstone hybrid event beds mainly with groove marks, interpreted as submarine lobe-axis (or off-axis) deposits; and e) tabular, thin- to medium-bedded, fine-grained, mainly turbiditic sandstones mostly with flute marks, formed in a lobe-fringe environment. Both lobe environments also comprised turbidites with low-amplitude bed waves and large ripples, which are interpreted to represent transient-turbulent flows. The strong relationship between flute marks and turbidites agrees with earlier predictions that turbulent shear flows are essential for the formation of flute marks. Moreover, the observation as part of this study that debris-flow deposits are exclusively associated with groove marks signifies that clay-charged, laminar flows are carriers for tools that are in continuous contact with the bed. A new process model for hybrid event beds, informed by the dominance of tool marks, in particular grooves, below the basal sand division (H1 division of Haughton et al. 2009) and by the rapid change from turbidites in the channel to hybrid event beds in the channel–lobe transition zone, is proposed. This model incorporates profound erosion of clay in the channel by the head of a high-density turbidity current and subsequent transformation of the head into a debris flow following rapid lateral flow expansion at the mouth of the channel. This debris flow forms the groove marks below the H1 division in hybrid event beds. A temporal increase in cohesivity in the body of the hybrid event is used to explain the generation of the H1, H2, and H3 divisions (sensuHaughton et al. 2009) on top of the groove surfaces, involving a combination of longitudinal segregation of bedload and vertical segregation of suspension load. This study thus demonstrates that sole marks can be an integral part of sedimentological studies at different scales, well beyond their traditional use as indicators of paleoflow direction or orientation.

Facies and bed type characteristics of channel‐lobe transition deposits from the Oligocene‐Miocene Tajau Sandstone Member, Kudat Formation, Sabah, Malaysia

Channel‐lobe transition zones (CLTZs) are identified in many modern deep‐water systems, but few exhumed examples have been identified. Exposures of the Oligocene‐Miocene Tajau Sandstone Member (TSM), Kudat Formation, northern Sabah, Malaysia, provides the opportunity to document a CLTZ from an active basin margin. This work provides the first detailed field‐based sedimentological logging to produce a quantitative database on facies, sedimentary structures, bed type, and statistical analysis. This is particularly important to produce a robust stratigraphic framework of the TSM. Sedimentary facies support interpretation of subaqueous sediment density flows, and key features, including scour‐fills, antidunes, and dune‐scale bedforms, suggest changes in gradient and/or flow confinement and the development of hydraulic jumps. Eight bed types are recognized including: (a) tripartite beds with a debrite (BT1), interpreted as hybrid event beds recording downslope flow transformation between turbulent and laminar states; (b) beds with a mixture of depositional, erosional, and bypass features (BT2, BT4, BT5), interpreted as recording the transitions between supercritical and subcritical flow conditions triggered by hydraulic jumps; (c) bipartite beds with a basal massive sandstone overlain by fine‐grained facies (BT3), interpreted as hyperconcentrated flow deposits with evidence of downcurrent flow transformation; (d) bipartite beds with a basal high‐density turbidite sharply overlain by a low‐density turbidite (BT6), interpreted as turbidites with evidence of sediment bypass; (e) basal tractive structures capped by fine‐grained facies as the product of reworking of very coarse‐ to coarse‐grained sediments caused by lateral spreading of turbulent flows; and (f) Bouma Tbcde sequences (BT8) interpreted as high‐to‐low‐density turbidites. Our depositional model for the TSM comprises: (a) an aggradational channel‐lobe transition zone (CLTZs/BTA 1 and BTA 2) which was dominated by hydraulic jumps and sediment bypass; and (b) stacked lobe (i.e., lobe‐axis/BTA 3a, lobe‐off axis/BTA 3b, frontal lobe fringe/BTA 3c, and distal lobe fringe/BTA 3d) located in the northern and southern parts of the study area, which is dominated by tabular, sheet‐like elements bioturbated with the Nereites ichnofacies. The aggradational stacking of CLTZs deposits observed in the TSM may be explained by high subsidence rates combined with high sediment supply rates associated with a tectonically active margin setting.

Evolution of deepwater turbidite bedforms in the Huaguang channel–lobe transition zone revealed by 3D seismic data in the Qiongdongnan Basin, South China Sea

The theoretical model of turbidite bedform evolution has been verified based on laboratory tests and outcrop surveys. However, the evolution of the bedforms associated with flow regime variation within the channel–lobe transition zone (CLTZ) is poorly documented and generally extremely poorly understood. In this study, a combination of seismic sedimentological and topographic analyses, based on high-resolution 3D seismic data within the Qiongdongnan Basin of the South China Sea, was used. Continuous bedforms varied with the depositional elements within the CLTZ of the Huaguang leveed channel system along the flow direction. The depositional elements within the CLTZ change from the main channel to the distributary channels as well as to the sub-distributary channels. Numerous bifurcation and confluence points of gravity flows illustrated the complexity of the drainage network within the CLTZ. The average asymmetry index of the bedforms increased from 0.8 to 1.6, with the average wavelength increasing from 803 m to 1545 m along the thalweg of the channels. Crevasse splays at the starting reach of the CLTZ are likely to form the initial state of the new CLTZ in the future, because the slope gradient starting from the avulsion point was higher than that inside the channel. The deep scours at the bifurcation points and high steps at the confluence points demonstrate the critical roles of supercritical flows and hydraulic jumps in reworking the bedforms of the CLTZ. The high steps at confluence points were simultaneously formed along the margin and thalweg of the main channel. The acceleration mechanisms of flow velocity forming the high steps were the increase of the elevation difference along the internal slope of the main channel margin and promotion of discharge along the main channel thalweg. This paper presents newly completed deepwater observations of the present seafloor bedforms based on the turbidity currents within the CLTZ. These observations update the evolution model of local supercritical flows and hydraulic jumps under the global decreasing trend of the Froude numbers within CLTZs.

On the termination of deep-sea fan channels: Examples from the Rhône Fan (Gulf of Lion, Western Mediterranean Sea)

The termination of a deep-sea turbiditic channel represents the ultimate sink of terrigenous sediment in the oceans or lakes. Such environment is characterized by rapid slope decrease and by loss of confinement of turbidity currents. It results in the deposition of Channel-Mouth-Lobes that can be separated from the channel mouth by an erosional (scoured) or by-pass dominated Channel-Lobe Transition Zone. Several factors can control the occurrence, extent and morphologic expression of the area such as the slope break angle, the upslope and downslope angle and the mud/sand ratio in flows. Disentangling these factors remains challenging due to the scarcity of outcrops and to the usual faint morphologies and low thickness of deposits. With bathymetric and seismic data we calculated the morphometric parameters of 8 channel-levees and their Channel-Mouth Lobes from the deepest area of the Rhone fan, a mud-sand rich system, and among which the youngest one (called neofan) was deposited at the end of the Last Glacial Maximum between 21.5 and 18.3 ka cal. BP. Emplacement and shape (finger-shaped or pear-shaped bulges) of Channel-Mouth Lobes is controlled by the seabed morphology (adjacent channel-levees and salt diapirs). A less prominent morphology of the neofan is attributed to premature quiescence related to the post sea-level rise sediment starvation. We show that the occurrence and expression of a Channel-Lobe Transition Zone is controlled by the gradient upstream of the channel mouth slope break. The extended Channel-Lobe Transition Zone and detached lobe of the neofan are attributed to the high upslope gradient (0.26°) while the less detached or attached lobes of other channel-levees is attributed to lower upslope gradient (0.13°). We show that scouring and scours concatenation into flutes at the Channel-Lobe Transition Zone is a major driver for the inception of channels and further confinement of turbidity current. For the first time we show that concatenation of scours in shingled disposition developed an incipient channel sinuosity at this very early stage of channel development. The channel-levee can extend downslope nearly instantaneously by tens of kilometers when isolated nascent channels connect to the channel mouth.

Reconstruction of bedform dynamics controlled by supercritical flow in the channel–lobe transition zone of a deep‐water delta (Sant Llorenç del Munt, north‐east Spain, Eocene)

AbstractStable supercritical‐flow bedform phases under two‐dimensional steady flow are geometrically simple and include long‐wavelength cyclic steps at high Froude numbers and antidunes characterized by in‐phase flow that is near critical. Less well understood are the transitional bedform phases at the boundaries of the stable bedform fields and bedforms developing in complex flow geometries like the channel–lobe transition zone. This complexity is exacerbated by the fact that natural flows are never steady. Stable antidune bedforms may be reworked by temporally increasing discharge into chute and pool, and cyclic step and chute and pool fields will be reworked into antidunes if discharge is sufficiently decreasing. In addition, the channel–lobe transition zone is continuously evolving in space and time due to the influence of solitary hydraulic jumps at the channel mouth on channel extension and back stepping. This detailed outcrop study of a deep‐water delta slope belonging to the Eocene Sant Llorenç del Munt clastic wedge exposed near El Pont de Vilomara (north‐east Spain), tackles the complex bedform architecture problems by applying a method previously developed for fluvial deposits. Analysis of surfaces traced on high‐definition, drone‐derived in‐strike images combines architectural studies with facies analysis. Set boundaries of the bedforms were thus established, revealing the upslope migration of hydraulic jump zones and the intricate stacking of antidunes and solitary, mouthbar related chute and pool like structures. Further analysis of the stacking of bedforms and bounding surfaces provide evidence that deposition occurred in a relatively short (few hundreds of metres) channel–lobe transition zone at the base of the delta slope. The usefulness of the bounding surface hierarchy approach for turbidite deposits lies in the careful evaluation of the spatial extent of bounding surfaces, which are easily overlooked in complex architectures such as those created in the channel–lobe transition zone.

Architecture and development of the Magdalena Submarine Fan (southwestern Caribbean)

Submarine fans are the largest sediment accumulations on Earth and are key to study the sediment-transfer zone between terrestrial source area and deep-sea depositional sink. They provide information of past climate, tectonics, carbon global inventory, and can be prolific hosts for oil/gas resources. In this paper, we present, for the first time, an analysis of the entire Magdalena Submarine Fan (MSF), from the shelf break to the distal domain, based on ~224,000 km2 of multibeam bathymetry, as well as backscatter, subbottom profiler and regional/local seismic reflection data recently acquired in southwestern Caribbean Sea. The aim is to describe in detail the MSF morphology and depositional architecture, propose a fan segmentation landform assemblage, and determine its extent within the deep basin. Three fan segments are identified: upper, middle and lower fans. The upper fan extends from the coastline to a depth of ~3000 m. Its eastern sector is characterized by a canyon system off the present-day mouth of the Magdalena River, through which most of the sediments are transported downslope to be deposited in intra-slope basins bounded by structural highs of the South Caribbean Deformed Belt. The western upper fan is characterized by distinct channel-levee complexes that are partially removed by mass transport complexes that originated near the continental shelf edge. The upper to middle fan transition is marked by a decrease in regional gradient from 1° to about 0.3° and local relief, a change from large, irregular sediment waves to more regular waves that slowly decrease in amplitude downslope, and the appearance of erosional megascours. The middle fan bedform assemblage evidences the presence of a channel-lobe transition zone in this sector of the MSF, separating well-defined, upper fan channels from lower fan depositional lobes. The middle to lower fan transition occurs between ~3800 and ~3950 m and is defined by a further decrease in gradient and by a change from sediment waves to planar parallel-bedded reflectors on subbottom profiles. The lower fan extends to a maximum depth of ~4250 m and is characterized by an almost flat seabed (slope of 0.05°), interrupted by a few isolated bathymetric highs and low-relief channels (<5 m deep). The entire area of the lower fan is interpreted as an area of turbidity current deposition, with relatively sandy sediments in the south and west giving way to muddier sediments in the northeast, which could correspond to distal fan lobes. The identification of four regional seismic facies related to MSF sedimentation allowed us to constrain the fan extent in the southwestern sector of the Caribbean. Distally, within the Colombia Basin the fan terminates against areas of elevated seafloor (Kogi-Coyaima and Quimbaya seamounts, Aruzi and Ticuna hills, and Beata Ridge), which have acted as barriers to sedimentation. Nevertheless, it was determined that the MSF extends beyond the Colombia Basin and locally reaches the Lower Nicaraguan Rise. In this new scenario, we established that the MSF is much more extensive than previously recognized, with an area of ~237,000 km2, which puts it among the World's largest submarine fans.

Daily bathymetric surveys document how stratigraphy is built and its extreme incompleteness in submarine channels

Turbidity currents are powerful flows of sediment that pose a hazard to critical seafloor infrastructure and transport globally important amounts of sediment to the deep sea. Due to challenges of direct monitoring, we typically rely on their deposits to reconstruct past turbidity currents. Understanding these flows is complicated because successive flows can rework or erase previous deposits. Hence, depositional environments dominated by turbidity currents, such as submarine channels, only partially record their deposits. But precisely how incomplete these deposits are, is unclear. Here we use the most extensive repeat bathymetric mapping yet of any turbidity current system, to reveal the stratigraphic evolution of three submarine channels. We re-analyze 93 daily repeat surveys performed over four months at the Squamish submarine delta, British Columbia in 2011, during which time >100 turbidity currents were monitored. Turbidity currents deposit and rework sediments into upstream-migrating bedforms, ensuring low rates of preservation (median 11%), even on the terminal lobes. Large delta-lip collapses (up to 150,000 m3) are relatively well preserved, however, due to their rapidly emplaced volumes, which shield underlying channel deposits from erosion over the surveyed timescale. The biggest gaps in the depositional record relate to infrequent powerful flows that cause significant erosion, particularly at the channel-lobe transition zone where no deposits during our monitoring period are preserved. Our analysis of repeat surveys demonstrates how incomplete the stratigraphy of submarine channels can be, even over just 4 months, and provides a new approach to better understand how the stratigraphic record is built and preserved in a wider range of marine settings.

Quantification of Basin-Floor Fan Pinchouts: Examples From the Karoo Basin, South Africa

The topography of the seabed (orientation and gradient) and rheology of the flows greatly influences the character of basin-floor turbidity current deposits. Therefore, submarine fan pinchouts can help to constrain seabed topography and basin configurations at the time of deposition. Although the depositional architecture of submarine lobe pinchouts has been documented in various basin-fills, the quantification of the rates of change at pinchouts in different palaeogeographic positions and basin configurations has not been attempted previously. Here, we utilize extensive outcrops and research boreholes from the oblique up-dip pinchout of Fans 3 and 4 and the lateral pinchout of Fan 3 in the Tanqua depocentre, Karoo Basin, South Africa, to compare sedimentary facies and to quantify the rates of change in gross interval thickness. At the oblique up-dip pinchout, Fan 3 thins abruptly at a rate of 12 m/km, whilst Fan 4 thins at a rate of 4 m/km. Marked differences between Fan 3 and 4 in sedimentary facies and architecture towards the up-dip pinchout, with termination of lobes in Fan 3 and a channel-lobe transition zone and external levee in Fan 4, suggests progradation of the system. The thinning rate of the lateral pinchout of Fan 3 is 2 m/km with the presence of hybrid beds in the lower part of Fan 3, whilst the upper part is dominated by structured sandstones and thin-bedded heterolithics. The variations in facies suggest that at the lobe-scale frontal and lateral pinchouts are stacked at the lobe complex-scale lateral pinchout of Fan 3, highlighting the importance of a hierarchical understanding when studying basin-floor fan pinchouts. The quantified rates of change in fan thickness and sedimentology on the oblique up-dip and lateral fan pinchouts are markedly different. Contrasting pinchout architectures above slopes with subtle differences in gradient and orientation cautions against simple definition of reservoir input parameters for stratigraphic traps in submarine fan systems.

The Tectonically Controlled San Gabriel Channel–Lobe Transition Zone, Catalina Basin, Southern California Borderland

Abstract High-resolution geophysical data across the Catalina Basin, offshore southern California, USA, reveal a complex channel–lobe transition zone (CLTZ) and provide an opportunity to characterize an entire seafloor CLTZ in a tectonically active and confined-basin setting. The seafloor morphology, distribution of depositional and erosional features, and location of depocenters in the CLTZ are controlled by shifting confinement and seafloor gradient related to inherited basement structures, active faults, and basin margins. Below a Holocene hemipelagic drape, the Catalina Basin is dominated by CLTZ and lobe sedimentation from the San Gabriel Channel, with lesser accumulations from local sediment sources limited to basin margins. The San Gabriel Channel is structurally confined as it enters the Catalina Basin and appears unable to avulse; it continues into the basin as a channel that rapidly widens, decreases in relief, and becomes scoured at its margins. A CLTZ is imaged between the confined San Gabriel channel and its terminal lobes deposited > 50 km into the basin. Narrow, apparently disconnected channels with knickpoints occur throughout the proximal and mid-CLTZ and are concentrated near basement highs and basin-bounding Quaternary-active dextral strike-slip faults. A field of small-scale erosional crescent-shaped scours (∼ 100 m length, ∼ 200 m width, up to ∼ 10 m relief across ∼ 30 km2 region) occurs above a partially buried basement high that creates perturbations in seafloor gradient. Likewise, above a buried basement structure that locally increases seafloor gradient (up to 0.4°), the distal CLTZ may contain sediment waves (∼ 2–4 m wave height and ∼ 200–300 m wavelength) that are smaller than many other CLTZ examples. This study of the San Gabriel CLTZ in Catalina Basin provides high-resolution geophysical data coverage of a complete CLTZ and illustrates a tectonically controlled end-member CLTZ from the modern seafloor.

Deep-water channel-lobe transition zone dynamics: Processes and depositional architecture, an example from the Karoo Basin, South Africa

Submarine channel-lobe transition zones separate well-defined channels from well-defined lobes and form morphologically complicated areas, commonly located at breaks in slope. These areas play a vital role in the transfer of sediment through deep-water systems. Extensive outcrop exposures in the Karoo Basin, South Africa, permit investigation of the depositional architecture and evolution of entirely exhumed dip transects of a channel-lobe transition zone for the first time. Furthermore, the excellent paleogeographic constraint allows correlation to genetically related updip channel-levee systems and downdip lobe deposits over 40 km, with strike control over 20 km. Unlike the single time slice afforded by modern systems, the Karoo example uniquely allows study of the temporal shifting of the channel-lobe transition zone and transfer into the stratigraphic record. Key lateral changes along the base of slope include the variation from an interfingering levee-lobe transition zone to a bypass-dominated channel-lobe transition zone over a width of 14 km. Key recognition criteria for channel-lobe transition zones in the ancient record include combinations of scours and megaflutes, composite erosional surfaces, mudstone clast/coarse-grained sediment lags, and remnants of depositional bed forms, such as sediment waves. Documented here in a single channel-lobe transition zone, these features are arranged in a zone of juxtaposed remnant erosional and depositional features. The zone reaches 6 km in length, formed by at least four stages of expansion/contraction or migration. Strike variations and changes in the dimensions of the channel-lobe transition zone through time are interpreted to be the result of physiographic changes and variations in flow dynamics across the base of slope. The dynamic nature of channel-lobe transition zones results in complicated and composite stratigraphy, with preservation potential generally low but increasing distally and laterally away from the mouth of the feeder channel system. Here, we present the first generic model to account for dynamic channel-lobe transition zone development, encompassing distinctive recognition criteria, fluctuations in the morphology and position of the zone, and the complex transfer into the sedimentary record.

Architecture and morphodynamics of subcritical sediment waves in an ancient channel–lobe transition zone

AbstractIn modern systems, submarine channel–lobe transition zones show a well‐documented assemblage of depositional and erosional bedforms. In contrast, the stratigraphic record of channel–lobe transition zones is poorly constrained, because preservation potential is low and criteria have not been established to identify depositional bedforms in these settings. Several locations from an exhumed fine‐grained base of slope system (Unit B, Laingsburg depocentre, Karoo Basin, South Africa) show exceptional preservation of sandstone beds with distinctive morphologies and internal facies distributions. The regional stratigraphic context, lack of a basal confining surface, wave‐like morphology in dip section, size and facies characteristics support an interpretation of subcritical sediment waves within a channel–lobe transition zone setting. Some sediment waves show steep (10 to 25°) unevenly spaced (10 to 100 m) internal truncation surfaces that are dominantly upstream‐facing, which suggests significant spatio‐temporal fluctuations in flow character. Their architecture indicates that individual sediment wave beds accrete upstream, in which each swell initiates individually. Lateral switching of the flow core is invoked to explain the sporadic upstream‐facing truncation surfaces, and complex facies distributions vertically within each sediment wave. Variations in bedform character are related to the axial to marginal positions within a channel–lobe transition zone. The depositional processes documented do not correspond with known bedform development under supercritical conditions. The proposed process model departs from established mechanisms of sediment wave formation by emphasising the evidence for subcritical rather than supercritical conditions, and highlights the significance of lateral and temporal variability in flow dynamics and resulting depositional architecture.

Unraveling the Channel–Lobe Transition Zone With High-Resolution AUV Bathymetry: Navy Fan, Offshore Baja California, Mexico

Abstract:Ultra-high-resolution (1 m * 1 m * 0.25 m) bathymetry was acquired with an autonomous underwater vehicle (AUV) over a sector of the Navy Fan offshore Baja California. The survey specifically targeted an area where the former interpretation of the fan showed a channel–lobe transition; however, the lobe and the transition were not recognized. Instead, the newly acquired bathymetry shows that the previously identified channel continues basinward changing its overall morphology and stratigraphic architecture, becoming gradually but significantly wider (650–1000 m) and of lower relief (3–4 m). Cores from the channel thalweg recovered mud-poor (&lt; 5%) well-sorted sands, interpreted as deposited by fully turbulent flows. The cores also show several mud-rich (9–18%) poorly sorted sands, probably indicating deposition from more cohesive flows.The high-resolution bathymetry shows large sectors of the seafloor sculpted by elaborate bedforms and scours. The overbank area north of the channel exhibits the most numerous and prominent scours, interpreted to have been largely generated by flow stripping at a bend in the channel. Along high-gradient sectors (more than approximately 1¯) of this area, the scours are largest and deepest. Some of these scours show an erosional headwall and a distal upflow-dipping depositional bulge, forming repetitive bedforms interpreted as erosional cyclic steps associated with locked-in-place trains of hydraulic jumps. The scours seem to coalesce to form an incipient channel, which would likely drive the avulsion of the main channel. Further basinward, average gradients decrease (&lt; 0.6¯ ) and scours become smaller and less deep suggesting a gradient control on erosion. The southern channel margin and adjacent overbank area exhibit a trend of scours that are elongated transverse to flow, that successively repeat themselves basinwards, and that at times merge with sediment waves. Probably these scours are genetically linked to sediment waves, and they may have been formed by cyclic-step-like processes as well. The acquired bathymetry represents a breakthrough in the imaging of the proximal sectors of deep-sea fans, which provides the basis for an accurate morphometric characterization and the understanding of sedimentary processes and morphodynamics associated with the delivery of sediment into the deep sea.

Hybrid event beds in the proximal to distal extensive lobe domain of the coarse-grained and sand-rich Bordighera turbidite system (NW Italy)

The Upper Cretaceous Bordighera Sandstone of NW Italy is a coarse-grained, sand-rich elongated turbidite system (ca. 15 × 45 km in outcrop) up to 250 m thick, interpreted to have been deposited in a trench setting. The siliciclastic succession interfingers with muddy calcareous turbidites, which become more abundant toward the lateral and distal domains. Bed type associations allow the distinction of a proximal channelized domain which transitions to a more distal lobe domain, characterized by abundant mudclast-rich sandstones and by bipartite and tripartite beds with a mud-rich middle or upper division (hybrid event beds). The transition between the proximal and distal domains occurs over a relatively limited spatial extent (ca. 5 km). The presence of lenticular bed-sets made up of coarse grained and mud-poor sandstones throughout the distal domain suggests that distributary channels were present, indicating sediment bypass further down-dip toward the most distal and not preserved parts of the system. Hybrid event beds - commonly associated with distal and marginal fan environments such as fan fringes - are present throughout the lobe domain and extend for up to ca. 30 km in down-dip distance. They are more abundant in the proximal and axial depositional lobe domain and their appearance occurs within a short basin-ward distance from the inferred channel-lobe transition zone. Flow expansion at the termination of the channelized domain and the enhanced availability of cohesive substrate due to the presence of intra-basinal muddy calcareous beds are interpreted as the key controls on the widespread occurrence of mudclast-rich and argillaceous sandstone beds. The abrupt appearance and the persistent occurrence of such beds across an extensive domain have implications for characterizing bed-scale (sub-seismic) heterogeneity of deep-water clastic hydrocarbon reservoirs.