Channel Capacity Measurements Research Articles

Comparative Analysis of Terahertz Propagation Under Dust Storm Conditions on Mars and Earth

Reliable Terahertz (THz) links are necessary for outdoor point-to-point communication with the exponential growth of wireless data traffic. This study presents a modified Monte Carlo simulation procedure for estimating THz link attenuation due to multiple scattering by charged dust particles on the THz beam propagation path. Scattering models are developed for beams through dust, based on Mie and Rayleigh approximations for corresponding frequencies on Earth (0.24 THz) and Mars (0.24 & 1.64 THz). The simulation results are compared, considering parameters such as the number of Monte-Carlo photon (MCP) packets, visibility, dust particle placement density along the beam, frequency, and distance between the transmitter and the receiver. Moreover, a channel capacity model was proposed, considering THz link attenuation due to dust storms, spreading loss, and molecular absorption loss for Earth and Mars outdoor environments. Simulation results for Earth show that the link attenuation increases with dust particle placement density, distance, and frequency, and attenuation decreases with visibility and MCP packets. On Mars, similar results are obtained for both frequencies, except that the attenuation varies around a constant value with the frequency increase. Moreover, attenuation is slightly higher at 0.24 THz frequency compared to 1.64 THz when more dust particles are present on the beam propagation path. Channel capacity is estimated for Earth and Mars environments considering time and distance-dependent scenarios. Time windows that show a sudden drop of dust particles along the beam provide opportunities to communicate with high reliability. Moreover, increasing the distance between the transmitter and receiver severely reduces the channel capacity measurement in strong dust storm conditions in both environments. Our study has found that weak dust storms have relatively little effect on Mars but much more significant effects on Earth.

Indoor Channel Capacity Measurement of 2 x 2 MIMO Polarization Diversity Antenna

<span>This paper presents the channel capacity investigation and the polarization reconfigurable antenna analysis for MIMO system in an indoor scenario. A single and dual-port polarization reconfigurable antenna is used at the receiver end to study the effect of polarization diversity configurations towards the achievable performance of the channel capacity. The polarization reconfigurable antennas are developed through two techniques, which are slits perturbation for single-port and feeding network modification for dual-port. The benefits offered by the designed antennas are investigated when being used as a receiver in both line-of-sight (LOS) and non-line-of-sight (NLOS) scenarios. The results show the proposed antennas are suitable to be adopted and highly potential to improve the channel capacity of the MIMO systems.</span>

A compact mimo antenna with improved isolation bandwidth for mobile applications

An internal MIMO antenna for mobile applications is proposed. Helical-type antenna elements are used to construct the MIMO system. The resonance frequencies of the MIMO antenna are controlled by the number of turns per helix. A multi suspended line with lumped elements is used to reduce the coupling between the antenna elements. The antenna elements are located at the top edges of the ground plane, and a decoupling network is inserted between the two antenna elements. The performance of the prototype antenna is analyzed through the scattering parameters, actual diversity gain, envelope correlation coefficient, and channel capacity measurements. The isolation characteristic and MIMO performance can be improved by using the decoupling network at the LTE service band. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett 53:2314–2317, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26293

Collocated Microstrip Antennas for MIMO Systems With a Low Mutual Coupling Using Mode Confinement

Collocated antennas for mutiple input multiple output (MIMO) systems are presented. The structure is composed of a dual-polarized microstrip square patch combined to a dual-polarized microstrip square ring. Consequently, four different radiation patterns are available simultaneously. With a length of about one guided wavelength, the proposed structure is well suited to reduce the MIMO terminal size. The structure operates in the 5.25 GHz band and exhibits a mutual coupling between the four input ports less than -23.5 dB in simulation and -20 dB in measurement. MIMO channel capacity measurements have been performed and demonstrate that the proposed antenna system can replace a classical system based on space diversity.

Modelling Gaia CCD pixels with Silvaco 3D engineering software

Gaia will only achieve its unprecedented measurement accuracy requirements with detailed calibration and correction for radiation damage. We present our Silvaco 3D engineering software model of the Gaia CCD pixel and two of its applications for Gaia: (1) physically interpreting supplementary buried channel (SBC) capacity measurements (pocket-pumping and first pixel response) in terms of e2v manufacturing doping alignment tolerances; and (2) deriving electron densities within a charge packet as a function of the number of constituent electrons and 3D position within the charge packet as input to microscopic models being developed to simulate radiation damage.

Compact Antenna Array With Port Decoupling for LTE-Standardized Mobile Phones

A compact dual-element antenna has been designed at 710 MHz for newly emerging long-term evolution (LTE) personal wireless communication standard applications. The proposed antenna consists of two printed meander-line monopoles with edge-to-edge separation of nearly ?/45. The antenna elements are printed on FR-4 substrate and are located at the top edge of the ground plane measuring 50 × 87 mm2. An LC-components-based branchline hybrid coupler is used to decouple the antenna elements. The prototype antenna has been evaluated through the scattering parameters, radiation patterns, envelope cross correlation, and the channel capacity measurements. Isolation between the ports is better than 35 dB with matched ports at 710 MHz. The antenna offers reasonable multiple-input-multiple-output (MIMO) performances that make it suitable for LTE-standardized mobile phones.

Spatial correlation and capacity measurements for wideband MIMO channels in indoor office environment

This paper describes a broadband multiple input, multiple output (MIMO) channel characterization platform and capacity measurement results in indoor office environment. The MIMO testbed has been designed for broadband MIMO channel sounding, capacity measurements and for characterizing the directional-multipaths of the radio propagation channel. The MIMO channel data have been collected in 5 GHz band inside a modern office environment. Capacity results from these experiments are discussed for different propagation conditions, including non line-of-sight (NLOS) and LOS propagations with various spacings between array elements. Spatial correlations are analyzed from the measured data and a frequency selective MIMO channel model based on the correlation statistics is validated. Post-processing of the measured data with a sequential ESPRIT (Estimation of Signal Parameters via Rotational Invariance Techniques) algorithm is utilized to extract the directions of departures and arrivals of multipath components at the transmitting and receiving arrays, respectively. A method of obtaining broadband MIMO capacity, indirectly, from a single directional measurement of MIMO propagation channel is also proposed and verified from the measurement results.

Reconfigurable antenna solution for MIMO-OFDM systems

A reconfigurable microstrip dipole antenna solution for multiple-input multiple-output (MIMO) communication systems making use of orthogonal frequency division multiplexing (OFDM) is presented. When applied to closely spaced antenna arrays, this method can increase link capacity. The benefits of this novel antenna solution are demonstrated by channel capacity measurements taken in an indoor environment with a 2×2 MIMO system.

The channel‐geometry method: Guidelines and applications

AbstractAll river engineering schemes require flood discharge estimates as part of the design and appraisal process. Unfortunately, continuous measurement of flood discharges is limited to those river sites with instrumented gauging stations, which constitute only a small proportion of channel reaches where information is required. Therefore, considerable research effort has been devoted to the development of reliable indirect techniques of flood discharge estimation. Research on the interrelationship of stream channel geometry and river discharge has provided the basis for an indirect method of flood estimation – the channel‐geometry method – which employs river channel dimensions alone to estimate discharge characteristics at ungauged river sites. Channel‐geometry equations are developed empirically by relating streamflow data from gauging stations and channel dimensions measured from natural river reaches in the vicinity of the gauge, and take the form of power function relations. Once regional channel‐geometry equations have been defined, a channel width or channel capacity measurement is the only variable needed to estimate the flood flow characteristics at a specified river site. The method is useful as an alternative to traditional catchment‐based approaches or as a rapid reconnaissance technique. In addition to the application for flood discharge prediction, channel‐geometry equations could prove helpful in the management of river channels, first, by providing a basis for assessing local deviations in the channel form–discharge relation, deviations which could be employed as indicators of the sensitivity of particular stretches of river channel to change, and secondly, in the computation of natural channel dimensions for use in river channel design and river restoration.