Tooth Color Change Research Articles

Bleaching Gels and Light-Emitting Diodes: Comparison of Tooth Color Change.

To measure difference in tooth shade and color achieved via two different over-the-counter bleaching agents with and without their associated light-emitting diodes (LEDs). A total of 84 extracted human anterior teeth were randomly divided into seven groups. Gypsum models were made with 6 extracted teeth in an arch form (n = 12; 2 arches/group). Samples were kept hydrated throughout treatment (25°C). Bleaching treatment followed manufacturers' instructions with at least 1-h of rehydration between treatments. Control tooth arches were left untreated. L*a*b* values were measured with a Vita Easyshade (VITA North America, Yorba Linda, CA) three times per tooth using white and black backgrounds. ∆E (CIE 2000) was compared between and within treatment groups over time with ANOVA and post hoc Tukey (a = 0.05). Subgroup testing confirmed the data were normally distributed. Two-way ANOVA showed significant interaction between product (Control, Crest, Snow) and treatment (light only, product only, light and product) on ∆E values for black (p-value < 0.001, F = 15.28) and white (p-value < 0.001, F = 13.62) backgrounds. Post hoc pairwise Tukey tests showed a significant effect of light-and-product treatments in contrast to light- or product-only treatments. Repeated measures ANOVA of between-treatment change (∆E) by product showed significant interaction between time and treatment for Snow products (p < 0.001, F = 10.9) and independent effects of time and treatment for Crest products (Time: p-value < 0.001, Treatment: p-value < 0.01, F = 7.21) on a black background. On white backgrounds, only a significant effect of treatment was reported for both Snow (p-value < 0.01, F = 5.427) and Crest (p-value < 0.001, F = 5.61). Overall, a combination of light and gel produces significantly higher tooth color and shade change over time, with the highest change seen for Snow products. Many patients use over-the-counter tooth bleaching products because they are more cost effective and easier to access than in-office bleaching. However, these products may have adverse effects, such as increased sensitivity with repeated use, in addition to increased consumption of time and money. This project measured tooth shade between treatments which can help determine which product is most effective for at home use.

Effectiveness of KTP lasers in tooth bleaching, by comparing tooth color change after bleaching with KTP, Nd:YAG, Er:YAG, and diode laser system: A systematic review.

This systematic review evaluated the role of Potassium-titanyl-phosphate (KTP) lasers in dental bleaching by comparing tooth color change and rise in intrapulpal temperature after bleaching with KTP, Neodymium-doped yttrium aluminum garnet (Nd:YAG), Er:YAG, and diode laser system. Following were the inclusion criteria: in vitro studies in English available in full text. Articles published between 2000 and 2021 were selected. The search for was conducted on PubMed, Cochrane library/CENTRAL, Wiley online library, ProQuest, Science Direct, and Hand searching/specialized registers. Keywords were used: "Lasers" [Mesh] and "Tooth bleaching" [Mesh] using Boolean operators. A total of four articles fulfilled the inclusion criteria. The quality assessment of studies included was undertaken independently as part of data extraction process. KTP lasers demonstrated more effectiveness in attaining color change in stained teeth and showed the lowest rise in intrapulpal temperature. Based on the data obtained in the present review, the choice of bleaching treatment is directly related to the type of discoloration, activation of the bleaching agent, and esthetic requirement. Although all bleaching procedures were effective in color change, the KTP laser showed better results when compared to other laser activation. The bleaching treatment protocol is directly related to the type of discoloration, activation of the bleaching agent, and esthetic requirement. It has been demonstrated that a faster change in color can be obtained when bleaching is performed in combination with a light source, i.e., power bleaching aiming for a more in-depth change of color.

Exploring the efficacy of laser-assisted in-office tooth bleaching: A study on varied irradiation times and power settings utilizing a diode laser (445 nm)

The aim of this study was to evaluate the effectiveness of a laser-assisted in-office tooth bleaching treatment, employing a diode laser (445 nm) using different power and time settings. Two hundred human incisors were collected for evaluating tooth color change (ΔΕ00) and whiteness index in dentistry (ΔWID) following laser-assisted tooth bleaching treatment. The specimens were distributed into 25 groups (n = 8) according to laser output power (0.5–2 W) and duration of irradiation (10–60 s) that was applied. ΔΕ00 and ΔWID were evaluated using a spectrophotometer at three points of time (24 h, 1 week and 1 month after treatments). Three-way ANOVA revealed that power, duration of laser irradiation, and time of measurement after bleaching treatments significantly affected both ΔΕ00 and ΔWID(p < 0.05). Furthermore, laser irradiation increased ΔΕ00 and ΔWID at all applied powers compared to the control group (p < 0.05), but this increase was dependent on the duration of irradiation. Laser irradiation significantly increased ΔΕ00 when the duration of operation was 50–60 s at 0.5–1 W, while at 1.5–2 W was significantly increased when the duration was 30–60 s. ΔWID was significant higher in the laser groups compared to the control group at all powers, except for 0.5 W where it was significant higher when the duration was 50–60 s. The outcomes of the study can help in selecting the suitable power settings and duration of laser exposure to achieve the optimal whitening results while ensuring the safety of the tooth pulp.

Effect of air-abrasion pretreatment with three desensitizing agents on efficacy of in-office tooth bleaching.

To evaluate the influence of air-abrasion of enamel with three different desensitizing powders on the whitening effect of a bleaching gel containing 40% H2O2, which was used for in-office tooth bleaching. Forty human incisors, extracted and prepared, were acquired for this study and subsequently randomized into four groups (n = 10). The control group specimens underwent no pretreatment prior to the bleaching procedure, whereas the remaining three groups underwent air abrasion using distinct desensitizing powders; (a) Sylc, which contains bioglass 45S5; (b) BioMinF, which contains calcium phospho-fluoro-silicate glass; and (c) MI Pearls, which contains nano-hydroxyapatite, 1 h preceding the Opalescence Boost PF 40% bleaching procedure. Color measurements were conducted using a double-beam UV-Vis spectrophotometer at four distinct time points (prior to bleaching, 24 h, 15 days, and 30 days post-bleaching). Tooth color change outcomes revealed that there were no statistically significant results with respect to the interaction of the two criteria (treatments and time) (p = 0.990). Additionally, there were no statistically significant results with respect to the main effects of treatments (p = 0.385), while there were statistically significant effects with respect to the time criterion (p = 0.013). The use of the tested desensitizing powders prior the bleaching procedure did not affect the tooth color change induced by the tested bleaching agent. Tooth color change and whiteness are not affected by air-abrasion desensitizing treatments when applied prior to in-office bleaching procedures.

Evaluating the effectiveness of two wavelengths of 810 and 980 nm Diode laser with two different beam profiles on tooth discoloration in bleaching: an experimental study

Teeth color has a significant impact on facial aesthetics. Tooth bleaching is the safest way to lighten the color of your teeth. Today, hydrogen peroxide is the most commonly used bleaching agent. The diode laser is one of the light sources that speeds up the bleaching process. One of the laser beam features is the laser beam profile, which depicts the distribution of laser intensity across the beam section. The goal of this study is to look into the effectiveness of Gaussian and Flat top beam profiles on tooth shade using two diode laser wavelengths of 810 and 980 nm in the tooth bleaching process. Fifty human anterior and premolar teeth were extracted and placed in a tea and coffee solution for three weeks before being divided into five groups. The first group did not receive laser radiation because 40% hydrogen peroxide was used; in the second and third groups, the profile of the flat top beam and the wavelength were 810 and 980 nm, respectively; and in the fourth and fifth groups, the wavelength of the Gaussian beam profile was 810 and 980 nm. The shade of the samples before and after bleaching was measured with a CIELab-based spectrophotometer, and the results were analyzed using one-way ANOVA and Tukey’s multiple comparison test. All bleaching methods resulted in a significant change in tooth color (ΔE&gt;3.3). There was a significant difference in average shade changes across groups (P&lt;0.001). The highest degree of shade change was observed in two groups of lasers with a wavelength of 980 nm and profiles of Flat top beam (ΔE=5.35) and Gaussian (ΔE=5.02). There were no differences between the remaining groups. We conclude that the 980 nm wavelength produces a greater shade change than the 810 nm wavelength and chemical method. The diode laser’s 810 nm wavelength has no effect on the shade of teeth.

Tooth Discoloration from 2 Silver Fluorides Used in Adults with Special Needs: A Randomized Trial.

Discoloration of carious lesions after application of silver diamine fluoride lowers patient acceptance and limits its wider use for caries arrest. To assess lesion and tooth color changes from 2 novel silver fluoride (AgF) products and its relationship to caries activity (clinical visuo-tactile scores) and bacterial load (using laser fluorescence with the DIAGNOdent). A split-mouth design was followed, with matched smooth surface carious lesions in the same arch in adults with special needs randomized for 1-min treatments with AgF/potassium iodide (KI) (Riva Star Aqua, SDI) and AgF/stannous fluoride (SnF2) (Caries Status Disclosing Solution; Whiteley). Standardized images taken at baseline, immediately postoperatively, and at 3-mo review were subjected to digital image analysis to calculate delta-E and to track changes in luminosity of carious lesions. Twelve participants were recruited in the study. A total of 56 teeth (28 pairs) were included. Significantly greater changes were seen in treated lesions than in the adjacent noncarious natural tooth structure, both immediately after treatment and at the 3-mo review (P < 0.0001). Color change and caries activity were not affected by tooth type, tooth location, plaque status, salivary status, or special needs condition. AgF/SnF2 caused transitory darkening immediately on application, while AgF/KI caused the immediate formation of yellow deposits (silver iodide). Both products caused significant darkening of treated lesions at 3 mo (P = 0.0009; P = 0.0361), with no differences between them (P = 0.506). Responding lesions showed larger and more perceptible color changes immediately after either AgF application (P = 0.002; P = 0.024). Both AgF products were highly effective for caries arrest in this patient population. Despite minor differences in the appearance of treated lesions at the time of application, both products lead to similar darkening of treated sites at 3 mo. This study shows the usefulness of silver fluoride used in conjunction with potassium iodide or stannous fluoride for achieving caries arrest in smooth surface lesions in adults with special needs. Patients need to be informed that long-term staining of the lesion occurs with both, similar to silver diamine fluoride.

Assessment of changes in enamel colour following fixed orthodontic therapy using an advanced spectrophotometer: An in vivo study.

Any manipulation of the surface of natural teeth may result in a variation of their colour. The fixed orthodontic treatment (FOT) is one such procedure which alters the enamel surface during the procedure. To clinically evaluate the colour changes in teeth associated with comprehensive FOT (to compare the changes in test and control groups) and to determine the relationship of age and gender on enamel colour due to FOT by using an advanced spectrophotometer. The selection of sixty patients for the study was done randomly and among these thirty patients who underwent the FOT as the case group, the other thirty patients who did not need FOT, were the control group. The recordings of spectrophotometric data were done in a standardized manner for all patients in the labial circular region of every anterior tooth, following debonding and cleaning operations, and before bracket bonding. The Commission Internationale de l'Eclairage's L*, a*, and b* (lightness, red/green, and blue/yellow) tooth-type characteristics were used to measure color, and the associated color differences (DE) between the groups were computed. One-way ANOVA (a < 0.05) and the paired t-test were used to evaluate any changes in these color characteristics. Fixed orthodontic treatment is associated with changes in colour parameters. L* values decreased (P< 0.001), while a* and b* values increased (P< 0.001) at the end of treatment. All measured tooth types showed significant colour change (DE); their mean differences ranged from 1.64 to 2.96 DE units. Fixed orthodontics can change the natural colour of teeth. The CIE colour parameters L*, a*, and b* of natural teeth showed statistically significant differences after debonding the orthodontic appliances. The L* values decreased making the teeth look darker. The adolescent and male patients had more tooth colour changes than the adult and female groups.

Digital Photocolorimetric Analysis of In Vitro Tooth Color Changes.

Tooth color matching is challenging, and digital photocolorimetry using eLABor_aid (eLAB) provides objective evaluation through polarized photographs. However, its comparability with spectrophotometry remains unclear. Bovine incisor root canals (n=30) were prepared to simulate an incomplete root apex. The teeth were randomly assigned to three groups based on intracanal medication: control (without medication); calcium hydroxide/propylene glycol; and triple-antibiotic paste (n=10 each). Tooth color was assessed using both eLAB and spectrophotometry. Measurements were taken at the crown medio-cervical region on five-time intervals (baseline, 1, 3, 7, and 14 days). Statistical analysis included two-way repeated-measures ANOVA, Sidak post hoc and Pearson's correlation test (α=0.05). No significant differences were observed between the two methods for either medication or follow-ups (p>0.05). Triple-antibiotic paste exhibited higher color variation (p<0.05). After 7 days, all groups presented significant color changes (p<0.05). Moderate to high correlations (R2 from 0.51 to 0.84, p<0.0001) were found between both methods for all groups at all intervals. The eLAB is a reliable method for detecting tooth color changes, and its results are comparable to spectrophotometry analysis.

Comparison of In-office Bleaching Agent Application Times on Tooth Sensitivity and Color Change: A Systematic Review and Meta-analysis

Comparison of In-office Bleaching Agent Application Times on Tooth Sensitivity and Color Change: A Systematic Review and Meta-analysis

Dental color measurement to estimate age in adults: a systematic review and meta-analysis.

Age estimation is a major challenge in anthropology and forensic odontology laboratories, as well as in judicial settings, as one of the tools used in human identification. The aim of this study was to evaluate the usefulness of age estimation methods based on the accurate measurement of tooth color changes. A systematic review was carried out following the recommendations of the Preferred Reporting Items for Systematic Reviews and Meta-Analyses and in compliance with Cochrane criteria recommendations (PROSPERO registration number CRD 42022343371). An electronic search was performed in the following databases: Pubmed, Web of Science, Medline, Current Contents Connect, SciELO, KCI-Korean Journal Database, Derwent Innovations Index and Russian Citation Index. The search strategy yielded a total of 18 articles. A randomized meta-analysis model of the results for the CIE L*a*b* color variables stratified by age (less than 30 years, 30-60 years, 60 years and older) was performed with 9 of the 18 studies included in this systematic review. According to our results, sex and location of color measurement are the most influential factors in color estimation. All studies were carried out in healthy anterior teeth by spectrophotometry as the most commonly used method for color measurement, with CIE L*a*b* being the most commonly analyzed parameters. Studies based on age as a dependent variable showed R2 values between 0.28 and 0.56, being higher in ex vivo teeth. Studies based on age as an independent variable showed R2 values ranging from 0.10 to 0.48. The random model showed high heterogeneity for the L*, a* and b* parameters in all age groups, which is explained by discrepancies in age range and non-standardized conditions for color measurement. This systematic review highlights the need to protocolize age estimation studies that measure tooth color, in order to apply this method in different forensic settings.

Effect of carbamide peroxide on biomechanical properties of vacuum-formed retainers: A split-mouth randomized controlled trial

ObjectiveTo investigate the effect of tooth whitening on biomechanical properties of vacuum-formed retainers (VFRs). MethodsUsing a split-mouth, randomised controlled trial design, thirty participants were randomly allocated to receive whitening on either the upper or the lower arch, using 10 % carbamide peroxide for two weeks. Biomechanical properties such as hardness, tensile strength, and surface roughness were assessed two weeks after whitening was completed. ResultsTensile strength of the whitening arch (mean ± SD: 40.93 ± 3.96 MPa) was significantly lower than that of the control (47.40 ± 5.03 MPa) (difference 6.47 MPa, 95 % CI 4.51 – 8.42, p < 0.001). Hardness and internal roughness of the whitening arch (VHN = 14.63 ± 2.29 N/mm2 and Ra = 1.33 ± 0.35 µm, respectively) were significantly greater than those of the control (12.22 ± 1.86 N/mm2 and 0.96 ± 0.29 µm, respectively) (differences 2.41 N/mm2, 95 % CI 1.56 – 3.25, p < 0.001 and 0.37 µm, 95 % CI 0.23 – 0.51, p < 0.001, respectively). The whitening arch showed greater tooth colour change (ΔE = 6.00 ± 3.32) than the control (ΔE = 2.50 ± 1.70) (difference = 3.50, 95 % CI 2.43 – 4.56, p < 0.001). ConclusionsBased on this short-term study, marked tooth colour change was achieved by whitening with VFRs as the whitening trays, but this changed the VFRs’ biomechanical properties, including a decrease in tensile strength and an increase in hardness and internal roughness. Clinical significanceThe application of carbamide peroxide in VFRs may compromise their mechanical properties.

In-vivo evaluation of the effects of short-term dehydration and rehydration on the color differences of immature permanent incisor teeth.

It is aimed to evaluate the color changes of upper central incisor teeth with different root maturation levels after 15 min of dehydration and rehydration. Using the Cvek classification, 60 participants were divided into five groups. A spectrophotometer, equipped with a specially designed jig, was utilized for color measurements. Following isolation, color measurements were conducted at the dehydration process intervals of baseline, 1st, 2nd, 3rd, 5th, 7th, 10th, and 15th minutes. After mouth rinsing, measurements were repeated at the same time intervals during the rehydration process. CIEDE2000 (ΔE00) values and the Whiteness Index (WID) were obtained to compare the color changes between the initial readings and each interval. Friedman and Repeated Measures ANOVA were applied to compare classes by time during the dehydration and rehydration periods, as well as ANOVA and Kruskal-Wallis tests to compare by classes for each time (p < 0.05). Significant differences emerged in the mean ΔE00 values during dehydration and rehydration periods across all Cvek Classes (p < 0.05). While no statistically significant differences were observed among Classes at different minutes during the rehydration period (p > 0.05), it was particularly noted that the mean ΔE00 values of Classes 2, 3, and 5 at the 2nd minute of dehydration were statistically significantly higher than the mean of Class 1 (p < 0.05). However, when evaluating the starting and ending measurements of both dehydration and rehydration processes, and the overall change in ΔE00 and ΔWID, no significant variations were detected across the Classes (p > 0.05). In teeth that have just erupted and are still undergoing root development, dehydration in the initial minutes results in noticeable color changes. However, the change in ΔE00 and ΔWID of the teeth was found to be similar after the dehydration and rehydration processes. According to the Cvek classification, the lower color change in Class 1 teeth within the first 2 min of dehydration and the need for more than 15 min of rehydration for immature teeth with an open apex to return to their initial state after a 15-min dehydration are crucial for clinicians in terms of color assessment timing.

Evaluation of tooth color change after a bleaching process with different lasers

The aim of this in vitro study was to evaluate the efficiency of diode laser-activated bleaching systems for color change of teeth. 75 extracted teeth were studied in five different bleaching protocols. Group 1: diode laser 445 nm, 320 µm fiber, 0.5W, continuous wave mode, dose 53 J/cm2. Group 2: diode laser 970 nm, 320 µm fiber, 1W, continuous wave mode, dose 106.10 J/cm2. Group 3: diode laser 940 nm, bleaching handpiece, 7W, continuous wave mode, dose 105 J/cm2. Group 4: diode laser 940 nm, 300 µm fiber, 2W, continuous wave mode, dose 47.16 J/cm2. Group 5: bleaching process without laser activation. In groups 1, 2 and 5, teeth were bleached with Perfect Bleach Office + and in groups 3 and 4, LaserWhite20 bleaching gel was used. Tooth color was determined immediately after the bleaching process using a spectrophotometer. Color change data on the CIE L * a * b* system was analyzed statistically by the one-way ANOVA and Tukey’s HSD test. All bleaching procedures resulted in a change of color. All laser groups (∆E * ab > 3) have statistically larger ∆E * ab values than the control group (∆E * ab = 0.73) (p < 0.05). The diode laser 445 nm has the largest ∆E * ab value (∆E * ab = 4.65) and results in a significantly higher color difference than all other groups. In terms of color score difference in VITA Shades, all laser-activated groups lead to a lightening effect while the control group leads to only a slight lightening effect. The diode laser 445 nm produced the greatest color difference. Laser-activated bleaching is more effective than conventional bleaching without light activation. The diode laser 445 nm performs best in this in vitro study.

The effect of photobiomodulation therapy associated with casein phosphopeptide-amorphous calcium phosphate fluoride paste on the treatment of posthome whitening tooth sensitivity and color change: A randomized clinical trial.

This study assessed whether combining photobiomodulation therapy (PBMT) with casein phosphopeptide-amorphous calcium phosphate fluoride (CPP-ACPF) paste can effectively reduce post-home whitening tooth sensitivity (TS) without compromising shade change. Fifty participants were selected and assigned to one of four groups: (1) PLACEBO group-received a placebo paste and PBMT simulation; (2) PBMT group-received a placebo paste + PBMT; (3) CPP-ACPF group-received CPP-ACPF paste and PBMT simulation; (4) CPP-ACPF + PBMT group-received both CPP-ACPF paste and PBMT. The participants used whitening trays containing 22% carbamide peroxide for 2 h a day for 21 days. TS was measured daily using a visual analog scale, while shade change was assessed using a spectrophotometer: before bleaching treatment (T0), after the first (T1), second (T2), and third (T3) weeks of treatment, and 30 days (T4) after completing the whitening treatment. Intragroup analysis revealed that the PLACEBO group had the highest increase in sensitivity during the whitening treatment. The CPP-ACPF and PBMT groups showed no significant difference tooth whitening (TW) between weeks regarding aesthetic change. The CPP-ACPF and PBMT group exhibited a significant reduction in TS between the first and third and between the second and third weeks TW, but not between the first and second. Conversely, the PLACEBO group showed a higher sensitivity than the other groups (p < .05). The CPP-ACPF and PBMT groups did not differ from each other. Furthermore, the CPP-ACPF and PBMT group showed a greater decrease in sensitivity than the PLACEBO group at T1, T2, and T3 (p < .01), and was significantly differed from CPP-ACPF and PBMT groups only at T2 and T3. All groups confirmed TW effectiveness. Student's and paired t-test did not reveal any significant difference between groups (p > .05). Therefore, PBMT associated with CPP-ACPF paste can reduce TS without compromising the efficacy of TW.

Effect of Over-the-counter Whitening Toothpaste and Mouthwash in Orthodontics: A Literature Review.

To summarize and analyze all the available literature on the use of over-the-counter toothpaste and mouthwashes with whitening agents and their possible effects on orthodontic treatment. Tooth color change frequently occurs during orthodontic treatment and represents a self-perceived need. According to the patient's perspective, there is a preference for the use of toothpaste and mouthwashes with some whitening effect. An electronic bibliographic search in English was carried out until June 2022, in PubMed, Scopus, and Web of Science databases. Randomized or nonrandomized clinical trials and experimental laboratory studies were included. A total of 57 papers were obtained from an electronic search and 11 studies were included in the review. Outcomes such as strength force elastomeric, color stability, frictional resistance, ion release, shear bond strength (SBS), and adhesive remnant index (ARI) were evaluated. Toothpaste and mouthwashes with whitening action did not have a favorable effect on most of the outcomes evaluated. In some cases regular toothpaste showed a better effect and in other cases, there were no differences with the control group. Only in the outcome release of ions from wires to whitening effect in teeth with or without attached brackets, they have a better performance. Due to the unfavorable effects of over-the-counter whitening toothpaste and mouthwashes on orthodontic materials and appliances, their use should be justified during treatment. Chinchay-Ruesta S, Ortiz-Pizarro M, Rodríguez-Díaz DR, et al. Effect of Over-the-counter Whitening Toothpaste and Mouthwash in Orthodontics: A Literature Review. Int J Clin Pediatr Dent 2023;16(S-3):S311-S316.

Oral health knowledge, attitude and practice among parents of children with craniofacial syndromes.

Parents play an important role in caring for their children's oral health, especially for those with craniofacial deformities. In this study, we analyzed the oral health knowledge, attitude and practice (KAP) among parents of children of 1 to 16 years-of-age with craniofacial syndromes (CS) at Universiti Malaya Medical Center (UMMC), Malaysia. This was a case-controlled study conducted between March and December 2021 involving 30 parents of children with CS and 30 parents of normal children as controls. A modified validated KAP questionnaire was distributed to all parents. Statistical analysis was carried out using SPSS 26.0 and descriptive analysis was performed, with data expressed as mean, standard deviation, frequency and percentage (%). Most respondents from both groups were mothers (73.3%) between 31 to 40 years-of-age. Both groups of parents had similar levels of oral health knowledge; there was no significant difference between the two groups for 10 of the KAP questions (p > 0.05). However, there was a significant different between the two groups with regards to two 2 relating to the definition of plaque and its relationship to dental caries (p = 0.035 and p = 0.032, respectively). Some parents of CS children believed that primary teeth were not important (23.33%) and were not concerned if their children showed changes in tooth color (26.67%). Despite parental acknowledgement of ideal practice, both groups of children showed irregular dental attendance and reduced toothbrushing frequency. Parents of children with CS had a similar depth of oral health knowledge and a slightly reduced positive attitude when compared to parents in the control group. However, both groups of parents had poor knowledge relating to the transmission and causes of dental caries. Healthcare providers should increase their awareness strategies for parents to be more aware of the ways to improve their children's oral health.

Evaluation of Tooth Color Changes During The Retention Period in Patients Using Different Retention Appliances

Evaluation of Tooth Color Changes During The Retention Period in Patients Using Different Retention Appliances

A randomized clinical trial investigating the effect of three vital tooth bleaching protocols on oral health-related quality of life

ObjectivesThis study aimed to compare changes in oral health-related quality of life (OHRQoL) resulting from three vital tooth bleaching protocols. MethodsThe participants (n = 105) were randomly assigned to one of three vital bleaching treatment groups: home bleaching (HB), in-office bleaching (IOB), or combined bleaching (CB). HB involved the use of custom-made trays and 10% carbamide peroxide for a 14-day treatment period. IOB utilized 37.5% hydrogen peroxide applied in three cycles. CB treatment involved the use of IOB followed by HB. Tooth colour change was evaluated using a shade guide (ΔVS) and a digital spectrophotometry device (ΔES). The Oral Health Impact Profile-14 (OHIP-14) and Oral Impact on Daily Performance-22 (OIDP-22) instruments were used to assess changes in OHRQoL at baseline, 15-days and 6-month recalls. Linear mixed models were used to estimate between- and within-group differences. ResultsAll bleaching protocols led to significant improvements in overall OHIP-14 scores at the 6-month recall (p ≤ 0.037). CB and IOB treatments were associated with more substantial positive impacts on overall scores, psychological discomfort, physical disability (CB only), and psychological disability (CB only) compared to HB (p ≤ 0.011). Significant enhancements in OIDP-22 scores were observed in the CB and HB groups at the 6-month recall compared to baseline (p ≤ 0.006), with evidence indicating that these improvements were greater in the CB group compared to the IOB group (p = 0.007). ConclusionAll bleaching treatments demonstrated a positive impact on OHRQoL. However, the positive impact was most consistent across domains and age groups in the CB group. The positive impact was less pronounced in older age groups.

Tooth Discoloration and Solubility of Zinc Oxide Eugenol Combined with Different Concentrations of Nano-Curcumin: An in vitro Study.

Due to the unfavorable properties of eugenol, the eugenol content can be reduced to improve the properties of zinc oxide eugenol (ZOE) by making a new combination of nanocurcumin called curcumin pulpal paste (CPP). The aim of this in vitro study was to evaluate the solubility and tooth discoloration of three concentrations of CPP compared to ZOE, and Metapex. In this in vitro study for evaluating of the solubility, five groups including ZOE, Metapex, and three concentrations of CPP (5%, 10%, and 20%) were tested. For evaluating the solubility, the changes in of the weight of samples were measured at 1, 3, 7 and 30 days after initial setting. In order to evaluate the tooth discoloration, 75 bovine maxillary anterior teeth were filled with one of five pulpal pastes. The changes in tooth color were evaluated at 1 hour, 1 week, 1 and 3 months after material placement. The solubility increased by increasing the nano-curcumin percentage in CPPs. After 30 days, the solubility of the 5%CPP, and ZOE was not significantly different (p= 1.000). According to the colorimetric test, after 3 months, the highest discoloration was recorded for 20% CPP (8.45), and the smallest discoloration was registered for Metapex (4.06). The discoloration of 5% CPP, and 10% CPP was similar to ZOE's color change (p> 0.05). The results of the present study showed that the solubility of pulpal paste has increased with increasing curcumin concentrations. Therefore, pulpal paste with different nanocurcumin concentrations can be used considering the patient's age and the desired time of deciduous tooth loss, and dissolution of pulpal paste. Concerning the discoloration after 3 months, Metapex was the best material and the most discoloration rate was related to 20% CPP, and there was no difference between the 5% CPP, and 10% CPP with ZOE.

Advances in epidemiological status and pathogenesis of dental fluorosis.

Fluoride is commonly consider as a "double-edged sword" because low consumption of fluoride can effectively prevent dental caries, but excessive consumption of fluoride can cause fluorosis. Dental fluorosis (DF) is a characteristic feature of fluorosis in the oral cavity that is manifested as tooth color changes and evident enamel defect. Presently, the pathogenesis of DF remains unclear. Herein, we have summarized the research progress in the pathogenesis and mechanism of DF in the past 5years.