Changes In Oxygen Concentration Research Articles

Stage development characteristics of oxygen-lean combustion of coal in fire zone: Leap-migration mechanism, kinetic transition mechanism, and critical oxygen concentration

Effectively preventing the re-ignition of fire zones and safely unsealing enclosed fire zones are challenging. To address these issues, a thermogravimetric analysis technique was used to explore the leap-migration mechanism of the characteristic parameters (burnout index (H), comprehensive combustion performance parameters (Cb, S, and HF), and maximum combustion mass loss rate (dWmax))/temperatures (maximum pyrolysis mass loss rate point temperature (TVmax), pyrolysis endpoint temperature (Td), thermal polycondensation endpoint temperature (Tp), maximum combustion mass loss rate point temperature (TWmax), burnout temperature (Th), and combustion half-peak width (ΔT1/2)) of low-rank coal oxygen-lean combustion under different time-scale effects (TSEs). The sensitivity of characteristic parameters/temperatures to changes in oxygen concentration under coal rank transition was analyzed. Simultaneously, the kinetic real-time transformation mechanism during the oxygen-lean combustion stage progression was investigated. The results revealed that because of the competition between oxidation and pyrolysis, the leap-migration interval of characteristic parameters/temperatures for oxygen-lean combustion of low-rank coals is in the range of 5 %–3% oxygen concentration. This feature was less affected by the coal rank but is not affected by the TSE. In the low oxygen-lean range (5 %-1%), a change of oxygen concentration was more sensitive to the coal rank, and the high sensitivity of the oxygen concentration change reduced the influence of the coal rank on coal combustion performance. In addition, the apparent activation energy (Eα) curves during the early stage of combustion were relatively concentrated with the change of oxygen concentration, but relatively dispersed during the late stage of combustion. At 3 % oxygen concentration, the Eα values of different coals began to continuously decrease with increasing conversion rate, approaching the spontaneous reaction activation energy value of 40 kJ/mol. At oxygen concentration of 1 % reflected the complete limitation of the oxidation consumption reaction. Therefore, the critical oxygen concentration of typical low-rank coal oxygen-lean combustion was determined below 3 % oxygen concentration. The results of this study can provide scientific guidance for the unsealing of fire zones, and the effective prevention and control of the formation of new fire zone disasters.

Dynamic transition of internal oxides during high dew point heat treatment in Fe-2.4Mn-0.4Si-0.13 C alloy

The origin of the dynamic transition of internal oxides was clarified in Fe-2.4Mn-0.4Si-0.13C-based steel during decarburization annealing at 1073K. High dew point with H2 gas leads to the formation of deep decarburized ferrite layers containing grain boundary internal oxides. Microstructural characterization reveals the oxide transition from Mn2SiO4 to α-SiO2 at the tip of the internal oxidation layer and from α-SiO2 to Mn2SiO4 at the middle range of the internal oxidation layer. The dynamic transition between Mn2SiO4 and α-SiO2 is understood by the depletion in Mn contents and change of oxygen content, which change the normalized driving force of both oxides. The study gives a detailed mechanism of internal oxide formation and growth in multi-phase steel during high dew point annealing. Impact statementDuring high dew-point decarburization annealing, the fluctuation of Mn contents affects the driving force to form an internal oxide, resulting in the dynamic transition between Mn2SiO4 and α-SiO2.

Oxygen Microenvironments in E. coli Biofilm Nutrient Transport Channels: Insights from Complementary Sensing Approaches.

Chemical gradients and the emergence of distinct microenvironments in biofilms are vital to the stratification, maturation and overall function of microbial communities. These gradients have been well characterised throughout the biofilm mass but the microenvironment of recently discovered nutrient transporting channels in Escherichia coli biofilms remains unexplored. This study employs three different oxygen sensing approaches to provide a robust quantitative overview of the oxygen gradients and microenvironments throughout the biofilm transport channel networks formed by E. coli macrocolony biofilms. Oxygen nanosensing combined with confocal laser scanning microscopy established that the oxygen concentration changes along the length of biofilm transport channels. Electrochemical sensing provided precise quantification of the oxygen profile in the transport channels, showing similar anoxic profiles compared with the adjacent cells. Anoxic biosensing corroborated these approaches, providing an overview of the oxygen utilisation throughout the biomass. The discovery that transport channels maintain oxygen gradients contradicts the previous literature that channels are completely open to the environment along the apical surface of the biofilm. We provide a potential mechanism for the sustenance of channel microenvironments via orthogonal visualisations of biofilm thin sections showing thin layers of actively growing cells. This complete overview of the oxygen environment in biofilm transport channels primes future studies aiming to exploit these emergent structures for new bioremediation approaches.

Triphasic Oxygen Storage in Wet Nanoparticulate Polymer of Intrinsic Microporosity (PIM-1) on Platinum: An Electrochemical Investigation.

The triphasic interaction of gases with electrode surfaces immersed in aqueous electrolyte is crucial in electrochemical technologies (fuel cells, batteries, sensors). Some microporous materials modify this interaction locally via triphasic storage capacity for gases in aqueous environments linked to changes in apparent oxygen concentration and diffusivity (as well as activity and reactivity). Here, a nanoparticulate polymer of intrinsic microporosity (PIM-1) in aqueous electrolyte is shown to store oxygen gas and thereby enhance electrochemical signals for oxygen reduction in aqueous media. Oxygen reduction current transient data at platinum disk electrodes suggest that the reactivity of ambient oxygen in aqueous electrolyte (typically Doxygen = 2.8 × 10-9 m2 s-1; coxygen = 0.3 mM) is substantially modified (to approximately Dapp,oxygen = 1.6 (±0.3) × 10-12 m2 s-1; capp,oxygen = 50 (±5) mM) with important implications for triphasic electrode processes. The considerable apparent concentration of oxygen even for ambient oxygen levels is important. Potential applications in oxygen sensing, oxygen storage, oxygen catalysis, or applications associated with other types of gases are discussed.

Monte Carlo simulations of microdosimetry and radiolytic species production at long time post proton irradiation using GATE and Geant4-DNA.

Radiobiological effectiveness of radiation in cancer treatment can be studied at different scales (molecular till organ scale) and different time post irradiation. The production of free radicals and reactive oxygen species during water radiolysis is particularly relevant to understand the fundamental mechanisms playing a role in observed biological outcomes. The development and validation of Monte Carlo tools integrating the simulation of physical, physico-chemical and chemical stages after radiation is very important to maintain with experiments. Therefore, in this study, we propose to validate a new Geant4-DNA chemistry module through the simulation of water radiolysis and Fricke dosimetry experiments on a proton preclinical beam line. In this study, we used the GATE Monte Carlo simulation platform (version 9.3) to simulate a 67.5 MeV proton beam produced with the ARRONAX isochronous cyclotron (IBA Cyclone 70XP) at conventional dose rate (0.2Gy/s) to simulate the irradiation of ultra-pure liquid water samples and Fricke dosimeter. We compared the depth dose profile with measurements performed with a plane parallel Advanced PTW 34045 Markus ionization chamber. Then, a new Geant4-DNA chemistry application proposed from Geant4 version 11.2 has been used to assess the evolution of , , , , , , and reactive species along time until 1-h post-irradiation. In particular, the effect of oxygen and pH has been investigated through comparisons with experimental measurements of radiolytic yields for and Fe3+. GATE simulations reproduced, within 4%, the depth dose profile in liquid water. With Geant4-DNA, we were able to reproduce experimental radiolytic yields 1-h post-irradiation in aerated and deaerated conditions, showing the impact of small changes in oxygen concentrations on species evolution along time. For the Fricke dosimeter, simulated G(Fe3+) is 15.97±0.2 molecules/100eV which is 11% higher than the measured value (14.4±04 molecules/100 eV). These results aim to be consolidated by new comparisons involving other radiolytic species, such as or to further study the mechanisms underlying the FLASH effect observed at ultra-high dose rates (UHDR).

Hyperbaric Oxygenation Maintains Elevated Stromal Oxygen Availability During Corneal Collagen Crosslinking with and Without Epithelial Removal

Purpose Corneal collagen cross-linking (CXL) can halt corneal ectasia. Leaving corneal epithelium intact during treatment may reduce the incidence of complications. However, it is under debate whether this reduces efficacy and if oxygen supplementation may be necessary to optimize the cross-linking effect. This study aimed to investigate the impact of hyperbaric oxygenation (HBO) on intracorneal oxygen concentrations during epi-off and epi-on CXL. Methods CXL was performed using riboflavin and ultraviolet-A (UV-A) irradiance (3 mW/cm2 for 30 min) on porcine corneas under normobaric and hyperbaric conditions, with and without supplemented oxygen, with and without epithelium. Intracorneal oxygen concentrations were continuously monitored before and during irradiation. Biomechanical properties were assessed through tensile strength testing. Results HBO alone did not cause perceivable changes in stromal oxygen concentrations. Oxygen supplementation resulted in higher oxygen concentration in corneal stroma during CXL. HBO may cause a further increase in oxygen levels, although this was not statistically significant in this study. Notably, a tendency of oxygen levels to rise continuously during UV-irradiation was observed using HBO. Biomechanical properties showend no statistically significant differences between any groups. Conclusions In this ex-vivo model, HBO increased stromal oxygen levels during CXL, regardless of the presence of corneal epithelium. The dynamics in oxygen concentrations in corneal stromal tissue during CXL suggest that time is an important factor to consider in modifications of established protocols. Also, we hypothesize that stromal levels of riboflavin and UV-A irradiance may be more critical to the CXL effect when oxygen is supplemented and epithelium is not removed.

Analysis of Oxygen Concentration in the Oral Cavity During Intravenous Sedation with Intranasal Oxygen Administration for Dental Treatment.

Intravenous sedation (IVS) with propofol (PPF) is commonly performed in dental treatment, particular in patients with dentophobia, with gag reflex, or undergoing implant surgeries, as PPF has the advantages of rapid induction and recovery. However, PPF and other intravenous sedatives may cause respiratory depression. Thus, IVS with PPF requires oxygen administration. But airway burn may occur when high-concentration oxygen is stored in the oral cavity and catches fire. For these reasons, the present study aimed to elucidate the changes in oxygen concentration (OC) under IVS with PPF and oxygen administration. Nineteen healthy male volunteers participated in the study. None of them had missing teeth, nasal congestion, or temporomandibular joint dysfunction. They were sedated with a continuous PPF infusion dose of 6 mg/kg/hr for 25 min, followed by administration of 3 L/min oxygen via a nasal cannula. The OC was measured at two sites, namely, the median maxillary anterior teeth (MMAT) and median maxillary soft palate (MMSP), before PPF infusion (baseline) and 14, 15-18 (Term 1), 19, and 20-23 (Term 2) min after the start of infusion. Compared with the values at baseline, the OC in the MMSP significantly increased at each time point, whereas the OC in the MMAT significantly increased at Term 2. Furthermore, in the comparison of the OC before and after the use of a mouth prop, the OC exhibited an upward trend, but no statistically significant differences were observed between the two time points in the MMAT and MMSP. In IVS with PPF and oxygen administration, the OC in the pharynx increases as the sedative level deepens. Oxygen administration should be temporarily discontinued, and suction should be performed to decrease the OC in the oral cavity when sparking procedures during IVS with PPF and oxygen administration are performed.

Simulation on the effect of oxygen concentration on the positive secondary streamer generated in oxygen-rich nitrogen–oxygen mixtures under atmospheric pressure

In this study, we investigated the effect of various O2 concentrations, from 20% to 90%, in nitrogen–oxygen ( N2/O2 ) mixtures on the characteristics of secondary streamers. As oxygen molecules have different molecular characteristics from nitrogen molecules in terms of ionisation threshold and electron attachment property, streamer discharges generated under various nitrogen–oxygen ratios may exhibit differing characteristics such as electron density, electric field, and radical formation. We focused on the changes in these parameters in secondary streamers using simulations. Simulations were first performed under the same conditions as those in previous experiments to compare the results of the ozone production, discharge current, and discharge emission characteristics. To compare the ozone production characteristics, simulated O radicals–the precursor of ozone–were used in the simulation for simplicity. This comparison showed that, although the absolute values of each parameter were different, the simulation exhibited a similar trend in the case of the experimentally obtained oxygen concentration dependence. After the validity of the simulation was verified to some extent via a comparison with the experiment, the results obtained from the simulation were analysed in detail. The results showed that, although the electric field strength in the secondary streamer did not change much as the oxygen concentration increased, the decrease rate of the electron density was greatly accelerated by the electron attachment reaction of oxygen. As a result, many of the electrons had already dissipate during the development of the primary streamer, and few electrons remained when the secondary streamer was formed. This effect suggests that the ratio of the amount of O radicals produced in the primary streamer to that produced in the secondary streamer changes as the oxygen concentration changes.

In Ukrainian

The CMs were obtained in argon in three stages: 1) heating (4 grad/min) to the specified temperature t in the range of 350–825 °С; 2) isothermal exposure 1 h; 3) cooling, washing from alkali and drying. Samples are denoted as CM(t). The CM yield (Y, %) and CMs elemental composition are determined. Based on low-temperature (77 K) nitrogen adsorption-desorption isotherms, integral and differential dependences of the specific surface area SDFT (m2/g) and pore volume V (cm3/g) on the average pore diameter (D, nm) were calculated by 2D-NLDFT-НS method (SAIEUS program). They were used to define volumes of ultramicropores (Vumi), supermicropores (Vsmi) and micropores (Vmi). The total pore volume V was calculated from the nitrogen amount adsorbed at a relative pressure p/p0 ~ 1.0. The S values of ultramicropores (Sumi), supermicropores (Ssmi) and micropores (Smi) were similarly determined. The CM yield was established to decrease linearly (R2 = 0.979) from 70.2 to 45.3 % with an increase in temperature from 350 to 825 °С. The carbon content decreases to a minimum value at 500 °С (72.6 %), and then increases to a maximum value (87.5 %) at 825 °С; the oxygen content changes antibatically. Two temperature regions were identified: region I (≤ 500 °С) of increasing the oxygen content due to reactions in which KOH acts as a donor of O atoms; region II (≥ 500 °C) of dominating the thermal destruction of functional groups (carboxyl, lactone, ester) with the release of CO and CO2, and condensation increasing the size of polyarenes of the CM secondary framework and formsng single Сar-Саr bonds between them. The CM(350) sample was found to contain only mesopores (D ≥ 10 nm) and macropores. An activation temperature increase to 400 °C initiates the additional formation of small-diameter micropores and mesopores. In samples CM(400) - CM(825), the main portion of newly formed pores falls on pores with D ≤ 5 nm. With increasing temperature, the micropores volume increases almost linearly (R2 = 0.992). The Vumi and Vsmi volumes increase up to 600 °C. At higher temperatures the ultramicropores volume decreases due to transforming ultramicropores (D ≤ 0.7 nm) into supermicropores (D = 0.7–2.0 nm). Portion of the ultramicropores volume changes with a maximum (23.9 %) in the CM(600) sample. The SBET specific surface area linearly (R2 = 0.992) increases with temperature up to 1729 m2/g. The SDFT values are close to SBET, but noticeably lower (1514–1530 m2/g) for CM(785)-CM(825). The micropores specific surface area increases to 1415 m2/g, and ultramicropore surface Sumi changes extremely with a maximum (526 m2/g) for the CM(600) sample, which should be expected based on the temperature dependence of the Vumi parameter. The decrease in Sumi values after the maximum is compensated by an increase in the supermicropore surface. Such an effect - the redistribution of pores by size in the microporous range (D ≤ 2 nm) with an increase in the alkaline activation temperature is not described in the literature. The portion of the micropores surface is dominant (92.6–97.0 %) in samples prepared at t ≥ 450 °C. The portion of the ultramicropore surface is maximum (56.3 %) in CM(500). Pores are revealed that do not form at all at 450–750 °C. These are supermicropores (D = 0.96–2.00 nm) and mesopores of small diameters (D = 2.0–2.82 nm). This effect was assumed to be due to the properties of the CM supramolecular framework, which is formed from polyarene fragments of the initial and activated coals having polyarenes with diameters of the same order (1.68–2.54 nm).

Modeling of the multi-cycle deep charge and discharge attenuation mechanism of non-aqueous Li–O2 batteries

Due to the high energy density, non-aqueous lithium-oxygen (Li–O2) batteries attract significant attention. However, batteries' high capacity attenuation rate under deep charge and discharge conditions remains a significant challenge. This paper presents a multi-cycle deep charge and discharge model for non-aqueous lithium-oxygen batteries, which predicts the performance of the battery during multiple deep charge and discharge cycles at high and low discharge-specific capacities. The parameter states during different discharge stages in different discharge cycles are investigated by analyzing the battery's cathode porosity, product volume fraction, and oxygen concentration changes. The study shows that as the number of cycles increases, the deposition of a small number of discharge products in the cathode altered the distribution of the newly generated products, thereby affecting the cathode structure and oxygen transport in the subsequent discharge. Moreover, depositing a small amount of discharge products can result in significant capacity attenuation in the battery. This model can accurately evaluate the deep charge and discharge performance attenuation process of non-aqueous Li–O2 batteries, which helps improve the understanding of the deep discharge attenuation mechanism of non-aqueous Li–O2 batteries.

Structure-electrochemical performance relationship in Sr2(Fe1-xVx)MoO6 anode

Structural property is becoming a powerful tool to manipulate oxygen vacancy concentration and electrochemical performance of electrode material. In this work, the structure-electrochemical performance relationship of Sr2(Fe1-xVx)MoO6 (x = 0, 0.1, 0.2 and 0.25) anode is investigated based on X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), Energy Dispersive Spectrometer (EDS), BET surface area, DC four-point probe, I–V and electrochemical impedance spectra (EIS). XRD results show that all the compounds are of single phase, the tetragonal to cubic phase transition occurs at x = 0.1, which plays important role in its electrochemical performance. Firstly, the disappeared structural distortion in Sr2(Fe1.8V0.2)MoO6 and Sr2(Fe1.75V0.25)MoO6 anodes benefits electron hopping between Fe–O–Mo–O–Fe, so electron transfer processes (high-frequency semicircle) in their EIS are facilitated. Secondly, both XPS survey and EDS spectrum confirm the change in oxygen content with structural transition, Sr2(Fe1.9V0.1)MoO6 anode own higher concentration of oxygen vacancy, thus the oxygen surface exchange and diffusion process (low-frequency arc) of the corresponding cell is reduced significantly. Consequently, Sr2(Fe1.9V0.1)MoO6-based cell exhibits the highest power output (810 mW cm−2) at 850 °C. For Sr2(Fe1.8V0.2)MoO6 anode, BET surface area test reveals the slightly higher value, while its lower power density indicates that the influence of oxygen vacancy prevails over that of microstructure. Combining with EIS results, it can be deduced that Sr2(Fe1-xVx)MoO6 anodes with tetragonal symmetry own higher concentration of oxygen vacancy, thus the expected electrochemical performance is better than that of other cells. Understanding the critical role of structure is important for achieving highly active electrode material.

Preliminary studies of selected Lemna species on the oxygen production potential in relation to some ecological factors.

Dissolved oxygen is fundamental for chemical and biochemical processes occurring in natural waters and critical for the life of aquatic organisms. Many organisms are responsible for altering organic matter and oxygen transfers across ecosystem or habitat boundaries and, thus, engineering the oxygen balance of the system. Due to such Lemna features as small size, simple structure, vegetative reproduction and rapid growth, as well as frequent mass occurrence in the form of thick mats, they make them very effective in oxygenating water. The research was undertaken to assess the impact of various species of duckweed (L. minor and L. trisulca) on dissolved oxygen content and detritus production in water and the role of ecological factors (light, atmospheric pressure, conductivity, and temperature) in this process. For this purpose, experiments were carried out with combinations of L. minor and L. trisulca. On this basis, the content of oxygen dissolved in water was determined depending on the growth of duckweed. Linear regression models were developed to assess the dynamics of changes in oxygen content and, consequently, organic matter produced by the Lemna. The research showed that the presence of L. trisulca causes an increase in dissolved oxygen content in water. It was also shown that an increase in atmospheric pressure had a positive effect on the ability of duckweed to produce oxygen, regardless of its type. The negative correlation between conductivity and water oxygenation, obtained in conditions of limited light access, allows us to assume that higher water conductivity limits oxygen production by all combinations of duckweeds when the light supply is low. Based on the developed models, it was shown that the highest increase in organic matter would be observed in the case of mixed duckweed and the lowest in the presence of the L. minor species, regardless of light conditions. Moreover, it was shown that pleustophytes have different heat capacities, and L. trisulca has the highest ability to accumulate heat in water for the tested duckweed combinations. The provided knowledge may help determine the good habitat conditions of duckweed, indicating its role in purifying water reservoirs as an effect of producing organic matter and shaping oxygen conditions with the participation of various Lemna species.

MiR-18a affects hypoxia induced glucose metabolism transition in HT22 hippocampal neuronal cell line through the Hif1a gene

Hypoxia can cause a variety of diseases, including ischemic stroke and neurodegenerative diseases. Within a certain range of partial pressure of oxygen, cells can respond to changes in oxygen. Changes in oxygen concentration beyond a threshold will cause damage or even necrosis of tissues and organs, especially for the central nervous system. Therefore, it is very important to find appropriate measures to alleviate damage. MiRNAs can participate in the regulation of hypoxic responses in various types of cells. MiRNAs are involved in regulating hypoxic responses in many types of tissues by activating the hypoxia-inducible factor (HIF) to affect angiogenesis, glycolysis and other biological processes. By analyzing differentially expressed miRNAs in hypoxia and hypoxia-related studies, as well as the HT22 neuronal cell line under hypoxic stress, we found that the expression of miR-18a was changed in these models. MiR-18a could regulate glucose metabolism in HT22 cells under hypoxic stress by directly regulating the 3’UTR of the Hif1a gene. As a small molecule, miRNAs are easy to be designed into small nucleic acid drugs, so this study can provide a theoretical basis for the research and treatment of nervous system diseases caused by hypoxia.Graphical

Hyperoxic-hypoxic Paradox: Breast Cancer Microenvironment and an Innovative Treatment Strategy.

A small therapeutic range of oxygen is required for effective metabolism. As a result, hypoxia (low oxygen concentration) is one of the most potent inducers of gene expression, metabolic alterations, and regenerative processes, such as angiogenesis, stem cell proliferation, migration, and differentiation. The cellular response is controlled by sensing the increased oxygen levels (hyperoxia) or hypoxia via specific chemoreceptor cells. Surprisingly, changes in free oxygen concentration instead of absolute oxygen levels may be regarded as a deficiency of oxygen at the cellular level. Recurrent intermittent hyperoxia may trigger many mediators of cellular pathways typically generated during hypoxia. The dilemma of hyperoxic-hypoxic conditions is known as the hyperoxic-hypoxic paradox. According to the latest data, the hypoxic microenvironment, crucial during cancer formation, has been demonstrated to play a key role in regulating breast cancer growth and metastasis. Hypoxic circumstances cause breast cancer cells to respond in a variety of ways. Transcription factors are identified as hypoxia-inducible factors (HIFs) that have been suggested to be a factor in the pathobiology of breast cancer and a possible therapeutic target, driving the cellular response to hypoxia. Breast cancer has a dismal prognosis due to a high level of resistance to practically all well-known cancer management that has been related to hypoxia-based interactions between tumor cells and the stromal milieu. We attempt to review the enigma by exploring the starring roles of HIFs in breast cancer, the HIF paradox, and the hyperoxic-hypoxic enigma.

HIF3A gene disruption causes abnormal alveoli structure and early neonatal death.

Transcriptional response to changes in oxygen concentration is mainly controlled by hypoxia-inducible transcription factors (HIFs). Besides regulation of hypoxia-responsible gene expression, HIF-3α has recently been shown to be involved in lung development and in the metabolic process of fat tissue. However, the precise mechanism for such properties of HIF-3α is still largely unknown. To this end, we generated HIF3A gene-disrupted mice by means of genome editing technology to explore the pleiotropic role of HIF-3α in development and physiology. We obtained adult mice carrying homozygous HIF3A gene mutations with comparable body weight and height to wild-type mice. However, the number of litters and ratio of homozygous mutation carriers born from the mating between homozygous mutant mice was lower than expected due to sporadic deaths on postnatal day 1. HIF3A gene-disrupted mice exhibited abnormal configuration of the lung such as a reduced number of alveoli and thickened alveolar walls. Transcriptome analysis showed, as well as genes associated with lung development, an upregulation of stearoyl-Coenzyme A desaturase 1, a pivotal enzyme for fatty acid metabolism. Analysis of fatty acid composition in the lung employing gas chromatography indicated an elevation in palmitoleic acid and a reduction in oleic acid, suggesting an imbalance in distribution of fatty acid, a constituent of lung surfactant. Accordingly, administration of glucocorticoid injections during pregnancy resulted in a restoration of normal alveolar counts and a decrease in neonatal mortality. In conclusion, these observations provide novel insights into a pivotal role of HIF-3α in the preservation of critically important structure and function of alveoli beyond the regulation of hypoxia-mediated gene expression.

Impact of high-altitude acclimatization and de-acclimatization on the intestinal microbiota of rats in a natural high-altitude environment.

Intestinal microorganisms play an important role in the health of both humans and animals, with their composition being influenced by changes in the host's environment. We evaluated the longitudinal changes in the fecal microbial community of rats at different altitudes across various time points. Rats were airlifted to high altitude (3,650 m) and acclimatized for 42 days (HAC), before being by airlifted back to low altitude (500 m) and de-acclimatized for 28 days (HADA); meanwhile, the control group included rats living at low altitude (500 m; LA). We investigated changes in the gut microbiota at 12 time points during high-altitude acclimatization and de-acclimatization, employing 16S rRNA gene sequencing technology alongside physiological indices, such as weight and daily autonomous activity time. A significant increase in the Chao1 index was observed on day 14 in the HAC and HADA groups compared to that in the LA group, indicating clear differences in species richness. Moreover, the principal coordinate analysis revealed that the bacterial community structures of HAC and HADA differed from those in LA. Long-term high-altitude acclimatization and de- acclimatization resulted in the reduced abundance of the probiotic Lactobacillus. Altitude and age significantly influenced intestinal microbiota composition, with changes in ambient oxygen content and atmospheric partial pressure being considered key causal factors of altitude-dependent alterations in microbiota composition. High-altitude may be linked to an increase in anaerobic bacterial abundance and a decrease in non-anaerobic bacterial abundance. In this study, the hypobaric hypoxic conditions at high-altitude increased the abundance of anaerobes, while reducing the abundance of probiotics; these changes in bacterial community structure may, ultimately, affect host health. Overall, gaining a comprehensive understanding of the intestinal microbiota alterations during high-altitude acclimatization and de-acclimatization is essential for the development of effective prevention and treatment strategies to better protect the health of individuals traveling between high- and low-altitude areas.

High Fat Feeding Blunts Skeletal Muscle Oxygen Mediated Blood Flow Responses in Healthy and Type 2 Diabetic Rats

Hypothesis: High fat diet feeding impairs microvascular blood flow responses to dynamic changes in local oxygen concentration ([O2]) in Sprague-Dawley (SD) and Zucker Diabetic Sprague-Dawley (ZDSD) rats. Methods: Seven-week-old male SD and ZDSD rats were fed either a standard chow (N = 7 SD, 5 ZDSD) or a high saturated fat diet (N = 8 SD, 6 ZDSD) for 7 weeks. At 14 weeks of age animals were anaesthetized, instrumented for systemic monitoring, and mechanically ventilated. The extensor digitorum longus muscle was blunt dissected and reflected over a gas exchange chamber imbedded in the stage of an inverted microscope. Microvascular blood flow responses to high and low [O2] challenges (7 – 12 %, and 7 – 2 %) and sequential changes in [O2] (7 – 12 – 2 – 7 %) were recorded at baseline and during hyperinsulinemic-euglycemic clamp. Gas conditions within the chamber were set at 7 % for a 1-minute baseline followed by 2 minutes at either 2 or 12 % O2. The 4-minute square wave oscillation consisted of 1 minute at each [O2] (7 – 12 – 2 – 7 %). Hyperinsulinemic-euglycemic clamp was achieved by simultaneous infusion of insulin (2 U/hr/kg) and variable rate of 50 % glucose until euglycemia was reached (5 - 7 mM blood glucose). Analysis of intravital videos was completed using custom MATLAB software. All animal protocols were approved by Memorial University’s Animal Care Committee. Results: Chow fed SD had significantly higher glucose infusion rates compared to high fat fed SD, chow fed ZDSD, and high fat fed ZDSD (28.11 ± 1.807 vs. 25.14 ± 1.18, 24.56 ± 2.78, 24.77 ± 2.43 mg/kg/min, p = 0.0429, 0.0305, 0.0323, respectively). Red blood cell (RBC) saturation significantly increased and decreased in all groups within 4 s following the increase and decrease in [O2], respectively. Chow fed SD had significant decrease in RBC supply rate (SR) in response to 12 % [O2] (10.41 ± 11.31 vs 7.44 ± 8.40 cells/s, p < 0.0001, τ = 15.85 s). In response to low [O2], significant increases in SR were measured in the chow fed SD and ZDSD groups (7.10 ± 8.76 vs 11.65 ± 11.36 cells/s, p < 0.0001, τ = 17.65 s, and 10.86 ± 13.62 vs 13.86 ± 14.69 cells/s, p < 0.0001, τ = 85.74 s, respectively). High fat fed SD and ZDSD had significant increases in RBC SR during 2 % [O2] (8.47 ± 9.75 vs 11.84 ± 12.11 cells/s, p < 0.0001, τ = 68.49 s, and 16.09 ± 18.12 vs 20.73 ± 21.92 cells/s, p < 0.0001, τ = 23.98 s). High fat fed ZDSD had higher, but not significantly different, baseline RBC SR compared to the chow fed ZDSD group. Chow fed SD were the only group to have an increase in RBC SR at low [O2] during hyperinsulinemic-euglycemic clamp (13.80 ± 17.78 vs 18.07 ± 20.25 cells/s, p = 0.0003, τ = 10.88 s). Conclusions: High fat feeding impairs the capillary blood flow response to local increases in [O2] in healthy and high fat fed T2D model rats. Chow fed ZDSD rats had slower capillary blood flow dynamics than the SD control group. Hyperinsulinemic-euglycemic clamp diminishes the O2 mediated blood flow response in 14-week-old SD and ZDSD rats fed a high fat diet. This project was supported by the Canadian Institute of Health Research through a project grant to GMF. Studentships were supported by Memorial University's School of Graduate Studies and the Faculty of Medicine. This is the full abstract presented at the American Physiology Summit 2024 meeting and is only available in HTML format. There are no additional versions or additional content available for this abstract. Physiology was not involved in the peer review process.

Organosilica Nanosensors for Monitoring Spatiotemporal Changes in Oxygen Levels in Bacterial Cultures.

Oxygen plays a central role in aerobic metabolism, and while many approaches have been developed to measure oxygen concentration in biological environments over time, monitoring spatiotemporal changes in dissolved oxygen levels remains challenging. To address this, we developed a ratiometric core-shell organosilica nanosensor for continuous, real-time optical monitoring of oxygen levels in biological environments. The nanosensors demonstrate good steady state characteristics (KpSV = 0.40 L/mg, R2 = 0.95) and respond reversibly to changes in oxygen concentration in buffered solutions and report similar oxygen level changes in response to bacterial cell growth (Escherichia coli) in comparison to a commercial bulk optode-based sensing film. We further demonstrated that the oxygen nanosensors could be distributed within a growing culture of E. coli and used to record oxygen levels over time and in different locations within a static culture, opening the possibility of spatiotemporal monitoring in complex biological systems.

Diagnostic evaluation and treatment of osteoarticular lesions in patients having sickle cell anemia: Literature review

Sickle cell anemia is a genetic disorder in which the structure of hemoglobin undergoes a significant alteration through a point mutation in the β-globin gene. When the gene is altered in sickle cell disease, hemoglobin S is expressed, causing the red blood cell to acquire the characteristic sickle shape. Thus, in the presence of this mutation, especially with changes in oxygen concentration and pH, hemoglobin S tends to polymerize, resulting in sickling of the red blood cells, leading to a shortened lifespan of red blood cells, vascular occlusion phenomena, and episodes of pain and organ damage. Among the complications caused by sickle cell disease, stroke, recurrent infections, osteoarticular disease, among others, can be mentioned. One of the complications that generates the greatest morbidity is osteoarticular lesions, which can present with symptoms such as pain, swelling, warmth, fever, reduced vascularization, and even necrosis. Therefore, this study aimed to evaluate the diagnostic methods used in osteoarticular lesions in patients with sickle cell anemia. Among the most commonly used diagnostic methods in patients with sickle cell disease suspected of osteoarticular lesions, we can emphasize imaging diagnostic methods such as X-rays, magnetic resonance imaging (MRI), scintigraphy, and PET-CT, which can be used to differentiate between different types of lesions and suspected infectious processes, such as osteomyelitis. Therefore, imaging diagnostic methods are essential in identifying the lesion and the best treatment, with total hip arthroplasty being the most invasive method, although it is often the initial choice due to the severity of the lesion, or it is used after unpromising results from other less invasive procedures, such as femoral head decompression, grafting, and subchondroplasty.

Biocompatible Phosphorescent Ir(III) Complexes for Hypoxia Sensing in PLIM Mode

AbstractIn this work, two new biscyclometalated Ir(III) complexes with diimine ligands were synthesized. The compounds were characterized by 1D and 2D NMR spectroscopy and HR ESI mass spectrometry. All complexes exhibit efficient phosphorescence with pronounced sensitivity to the presence of oxygen. The photophysical properties of the obtained compounds, including absorption, emission spectra, lifetimes and quantum yields of phosphorescence were measured in various aqueous and model biological media with variations in pH, temperature and at various O2 concentrations. The complexes exhibit a very good sensory response to the changes in oxygen concentration, resulting in an increase in quantum yields and lifetimes by 2.8–5.5 times upon oxygen removal from aerated aqueous solutions. Biological tests with CHO‐K1 cell line have shown that these compounds display low toxicity, rapid internalization into cells and localization predominantly in lysosomes. For the most promising complex the phosphorescence lifetime imaging experiments were conducted, revealing that this sensor markedly changes the phosphorescence lifetime values in cells from 1.8 to 4.1 μs upon transition from normoxia to simulated hypoxia. The obtained results indicate that this type of iridium chromophores can be effectively used for assessing the oxygen status of living objects by using time‐resolved luminescent microscopy.