Changes In Chemical Properties Research Articles

Combined Aerobic Fermentation of Maricultural and Agricultural Solid Waste: Physicochemical Property and Bacterial Community Structure

The large-scale production of maricultural solid waste is not used effectively and has a significant impact on the environment. However, there is no report on the utilization of solid waste in mariculture of maricultural and agricultural solid waste. At present, aerobic composting is a simple and feasible means of waste resource utilization, but it also seriously pollutes the environment. This paper studied the change of physical and chemical properties (T1: solid waste + straw, T2: solid waste + cow dung + straw, T3: solid waste + cow dung + straw + 5% biochar, T4: solid waste + chicken dung + cow dung + straw + 5% biochar) and microbial succession in the composting process (T4: solid waste + chicken dung + cow dung + straw + 5% biochar) and the effect of decomposed products on seed growth. The results showed that the mixed compost of various materials had a good regulating effect on the physical and chemical indexes, and the highest temperature could reach 69.4 °C. Biochar could extend the high temperature period by 1–2 days. The germination indexes of seeds treated with T1–T4 were 75%, 80%, 81%, and 94%, respectively. Through the change of the seed germination index, it could be seen that the bacterial community structure changed significantly during composting. The Chao 1 index and Shannon index showed that the bacterial abundance and diversity index increased and then decreased. The analysis of the bacterial community structure showed that Proteobacteria and Acinetobacter were the main bacteria in composting, and the relative abundance of Proteobacteria was 81.9% at the phyla level. Acinetobacter and Pseudoxanthomonas were the main bacteria in the process of composting. Acinetobacter was the dominant bacteria in the heating stage, with an abundance of 67.2%.

Multi-year crop rotation and quicklime application promote stable peanut yield and high nutrient-use efficiency by regulating soil nutrient availability and bacterial/fungal community

Diversifying cultivation management, including different crop rotation patterns and soil amendment, are effective strategies for alleviating the obstacles of continuous cropping in peanut (Arachis hypogaea L.). However, the peanut yield enhancement effect and temporal changes in soil chemical properties and microbial activities in response to differential multi-year crop rotation patterns and soil amendment remain unclear. In the present study, a multi-year localization experiment with the consecutive application of five different cultivation managements (including rotation with different crops under the presence or absence of external quicklime as soil amendment) was conducted to investigate the dynamic changes in peanut nutrient uptake and yield status, soil chemical property, microbial community composition and function. Peanut continuous cropping led to a reduction in peanut yield, while green manure-peanut rotation and wheat-maize-peanut rotation increased peanut yield by 40.59 and 81.95%, respectively. A combination of quicklime application increased yield by a further 28.76 and 24.34%. Alterations in cultivation management also strongly affected the soil pH, nutrient content, and composition and function of the microbial community. The fungal community was more sensitive than the bacterial community to cultivation pattern shift. Variation in bacterial community was mainly attributed to soil organic carbon, pH and calcium content, while variation in fungal community was more closely related to soil phosphorus content. Wheat-maize-peanut rotation combined with quicklime application effectively modifies the soil acidification environment, improves the soil fertility, reshapes the composition of beneficial and harmful microbial communities, thereby improving soil health, promoting peanut development, and alleviating peanut continuous cropping obstacles. We concluded that wheat-maize-peanut rotation in combination with quicklime application was the effective practice to improve the soil fertility and change the composition of potentially beneficial and pathogenic microbial communities in the soil, which is strongly beneficial for building a healthy soil micro-ecology, promoting the growth and development of peanut, and reducing the harm caused by continuous cropping obstacles to peanut.

Changes in chemical properties and microbial communities' composition of a forest litter-based biofertilizer produced through aerated solid-state culture under different oxygen conditions.

Fermented forest litter (FFL) is a bioproduct used as biofertilizer for several decades in Eastern Asia and Latin America. It is locally handcrafted by farmers in anaerobic conditions by fermenting forest litter added with agricultural by-products such as whey, cereal bran, and molasses. The aim of this study was to characterize the FFL process and product through gas and liquid chromatography analyses. It also provides some highlights on the influence of O2 on this solid-state culture. Under anoxic condition, a maximum CO2 production rate (CDPR) of 0.41mL/h∙g dry matter (dm) was reached after 8days. The main volatile organic compounds (VOCs) were ethanol and ethyl acetate, with a production rate profile similar to CDPR. After 21days of culture, no residual sucrose nor lactose was detected. Lactic and acetic acids reached 58.8mg/g dm and 10.2mg/g dm, respectively, ensuring the acidification of the matrix to a final pH of 4.72. A metabarcoding analysis revealed that heterolactic acid bacteria (Lentilactobacillus, Leuconostoc), homolactic acid bacteria (Lactococcus), and yeasts (Saccharomyces, Clavispora) were predominant. Predicted genes in the microbiome confirmed the potential link between detected bacteria and acids and VOCs produced. When O2 was fed to the cultures, final pH reached values up to 8.5. No significant amounts of lactic nor acetic acid were found. In addition, a strong shift in microbial communities was observed, with a predominance of Proteobacteria and molds, among which are potential pathogens like Fusarium species. This suggests that particular care must be brought to maintain anoxic conditions throughout the process.

Application of nanoparticles as novel adsorbents in blood purification strategies.

Blood purification therapy for patients overloaded with metabolic toxins or drugs still needs improvement. Blood purification therapies, such as in hemodialysis or peritoneal dialysis can profit from a combined application with nanoparticles. In this review, the published literature is analyzed with respect to nanomaterials that have been customized and functionalized as nano-adsorbents during blood purification therapy. Liposomes possess a distinct combined structure composed of a hydrophobic lipid bilayer and a hydrophilic core. The liposomes which have enzymes in their aqueous core or obtain specific surface modifications of the lipid bilayer can offer appreciated advantages. Preclinical and clinical experiments with such modified liposomes show that they are highly efficient and generally safe. They may serve as indirect and direct adsorption materials both in hemodialysis and peritoneal dialysis treatment for patients with renal or hepatic failure. Apart from dialysis, nanoparticles made of specially designed metal and activated carbon have also been utilized to enhance the removal of solutes during hemoadsorption. Results are a superior adsorption capacity and a good hemocompatibility shown during treatment of patients with toxication or end-stage renal disease. In summary, nanomaterials are promising tools for improving the treatment efficacy of organ failure or toxication. KEY MESSAGES The pH-transmembrane liposomes and enzyme-loaded liposomes are two representatives of liposomes with modified aqueous inner core which have been put into practice in dialysis. Unmodified or physiochemically modified liposomal bilayers are ideal binders for lipophilic protein-bound uremic toxins or cholestatic solutes, thus liposome-supported dialysis could become the next-generation hemodialysis treatment of artificial liver support system. Novel nano-based sorbents featuring large surface area, high adsorption capacity and decent biocompatibility have shown promise in treatment of uremia, hyperbilirubinemia, intoxication, and sepsis. A major challenge of production lies in avoiding changes in physical and chemical properties induced by manufacturing and sterilizing procedures.

Effect of intercropping maize and sunn hemp at different times and stand densities on soil properties and crop yield under in-field rainwater harvesting (IRWH) tillage in semi-arid South Africa

Abstract Background Evidence suggests that manipulating intercropping timing and stand density within intercropping systems could enhance crop yields. However, our current understanding of the effects of intercropping a cover crop on soil chemical properties and moisture still needs to be improved. This study investigates the effects of intercropping sunn hemp with maize at different timings and stand densities on selected soil properties and crop yield. Materials and methods A split-plot experiment was conducted under the in-field rainwater harvesting (IRWH) tillage. The trial had three intercropping times (simultaneously with maize planting, at V15 maize growth stage, and R1 maize growth stage) as the main plot factors and three stand densities (16, 32, and 48 plants m−2) as the subplot factors, with three replicates for both the 2019/20 and 2020/21 seasons. Changes in soil properties were assessed within the uppermost layer (0-30 cm). Soil moisture content was continuously monitored throughout the growing season and specific soil chemical properties were analyzed at harvest. Results The results showed that the interaction of sunn hemp intercropping period and stand densities did not significantly influence most of the measured soil properties. The early planting of sunn hemp had significantly 32.4% higher soil organic matter (SOM) than the last planting date at low stand density. After two growing seasons SOM, nitrogen, potassium, and manganese were significantly enhanced by 39.7%, 19.0%, 21% and 60.6% respectively. However, during the same period calcium, sodium and iron were significantly reduced by 13.4%, 46.1% and 78.0% respectively. The management of sunn hemp crop had significant effect on maize grain yield across the two seasons. The maize yields in the medium and high stand densities in the first season were significantly 15.3% and 34.3% higher than in the second season, respectively. Conclusion Due to the intercropping treatments, the retention of sunn hemp residues with varying quantities and qualities may have influenced the soil nutrient dynamics in the short-term. Significant changes in soil chemical properties and yield may need more time, and future research should be conducted out in agricultural regions with different soil mineral matrices.

Changes in Soil Chemical Properties and Growth of Palm Oil (Elaeis guineensis Jacq) with Comparative Composition of Plant Media

One of the benefits of Oil Palm Empty Fruit Bunches (OPEFB) waste can be processed into bokashi as a planting medium for oil palm nurseries. The research aims to: Determine changes in soil chemical properties due to the comparison of planting media, and obtain the best ratio of planting media to the best seedling growth in Main-Nursery. The research was conducted in Koto Panjang Ikur Koto Village, Koto Tangah District, Padang City. The study was conducted in January-April 2022. RAL design (completely randomized design) with 4 treatments and 6 replications. One experimental unit consist of 3 polybags of plants so there are 72 polybags of plants. Treatment: A = Control (Without Bokashi OPEFB), B = Topsoil: Bokashi OPEFB (1:3), C = Topsoil: Bokashi OPEFB (1:1), and D = Topsoil : Bokashi OPEFB (3:1). The results showed: Treatment B or Topsoil : Bokashi OPEFB (1:3) is the best, cause increase in soil chemical properties: pH 1.17 units; C-organic 1.98%; N-total 0.11%; P-available 4.01 ppm; K-dd 0.48 me/100g; Mg-dd 1.42 me/100g; and Ca-dd 2.67 me/100g. OPEFB bokashi application was significantly different to increase the plant height, not significant to wet weight and dry weight of the plant.

Polarization fatigue mechanism of laminated hafnium zirconium oxide ferroelectric thin films

Laminated HfO2-based ferroelectric thin films (FE-HfO2) have offered unexpected opportunities to implement the high-density ferroelectric memory and on chip piezoelectric or pyroelectric devices. But the polarization fatigue performance is poor and the underlying mechanism is unknown. In this work, we comprehensively investigate the polarization fatigue behaviors of Hf0.5Zr0.5O2(HZO)/Al2O3/HZO laminated thin films. Several possible mechanisms for the fatigue performances are discussed in detail. On basis of the analysis of micro-structures and domain switching dynamics before and after fatigue, we confirm that domain wall pinning phenomenon exists in the fatigued laminated HZO, without field-induced phase transition as well as thickness and chemical properties changes of interfacial layers. Moreover, we discover by a pulse measurement method that domain wall pinning induced by the increase of Al2O3/HZO interface trap charge is responsible for the fatigue performances of the laminated films. This work will provide useful guidance for designing high-reliability laminated FE-HfO2, and contribute to understand the physical mechanisms of FE-HfO2.

Ecological condition of marine waters in the area of dredging operations of the kashagan field, Kazakhstan

To determine the hydrophysical and hydrochemical parameters of sea water and their changes during dredging works in the north‐eastern part of the Caspian Sea along the Western Approach Route and near/inside block D, islands EPC‐2, EPC‐3, EPC‐4 and island A of the Kashagan field.Measurement of hydrophysical parameters: salinity, temperature, turbidity, dissolved oxygen concentration, electrical conductivity, pH of seawater was carried out using a portable multi‐parameter analyser "Horiba‐U53" directly in the water column. Water transparency was determined using a Secchi disc. The depth of the water layer was determined using a sounder. Hydrochemical investigations were carried out for seven parameters, with all components sampled in the near‐surface and benthic horizons. Water samples were taken using probes or bathometers: BM‐48, GR‐18 or their analogues.Hydrochemical analyses of seawater samples for: biogens (NO2, NO3, NH4, Ntotal, and Ptotal), synthetic surfactants, phenols, hydrocarbons including polyaromatic hydrocarbons (PAHS), heavy metals, chemical oxygen demand (COD) and biochemical oxygen demand (BOD5). These were carried out in laboratory conditions using analytical equipment according to scientifically accepted methods.The data obtained as a result of the research allow us to draw the following conclusion: changes in the amount of suspended sediment in sea water lead to changes in physical and chemical properties of water (increase in turbidity, disturbance of sediment composition and properties), changes in biotopes, deterioration of oxygen regime, optical properties of water and temperature regime.

Does century-old biochar affect soil interrill erodibility on cropland soils? A study on pre-industrial kiln sites

Adding biochar to soils is being advocated to mitigate soil erosion. However, given biochar aging and persistency in soils, the effects of biochar on soil in the long-term are important to investigate yet remain largely unknown. The objective was therefore to determine the long-term effect of biochar on interrill erosion on cropland soils. Experiments were conducted using topsoil from three fields of different textures (silt loam, loam and sandy loam). Each field was characterized by the presence of kiln sites containing century-old charcoal used as proxy to investigate the long-term impact of biochar. Aggregate stability was measured using the method of Le Bissonnais (1996), whereas interrill erosion was studied using two successive (24-h apart) rainfall simulation experiments (84 mm h−1, 90 min.). The presence of historical charcoal in kiln sites did not affect soil aggregate stability, irrespective of charcoal-C content or soil type. For the first rainfall simulation only, the century-old charcoal reduced both the final runoff and soil loss rates by, respectively, 15.4 mm h−1 and 12.1 g m−2 h−1 for each percent increase in charcoal-C content. As a result, Meyer’s interrill erodibility decreased with increasing charcoal-C content. However, because the final runoff and soil loss rates decreased to a similar extent with increasing charcoal-C content, Kinnell’s interrill erodibility was unaffected by charcoal-C content. These effects on interrill erosion parameters were independent of soil type and could not be related to changes in soil chemical properties. The measured reduction in runoff and soil loss were attributed to delayed crust development, which could be related to increasing proportions of clods in the soil samples with increasing charcoal-C content. Further research may be needed to confirm the observed trends and underlying mechanisms over a wider range of soil types.

Can saturated paste be used to predict bulk density in annual cropping systems in California?

AbstractSoil bulk density (BD) is important for measuring changes in soil chemical, physical, and biological properties; however, the measurement is tedious to collect and requires specialized equipment. Database measurements for soil surface BD do not always correspond to present field conditions as field management can alter BD in time. Saturation percentage (SP) is a routine lab measurement. The objectives of this study are to (1) understand if a relationship between BD and SP can be developed and (2) build a model that predicts BD based on a routine low‐cost lab analysis. We collected 83 soil samples from different experimental sites around California's Central Valley. At each site, BD, SP, soil organic matter (OM), and soil total organic carbon were measured. A set of models were generated and compared based on their Akaike information criterion (AIC) and adjusted R2. The best two models are presented in this paper, and their accuracy and precision in estimating BD were further compared by calculating the root mean square error (RMSE) and the R2 of the predicted versus values measured in the field. We determined that a strong relationship between BD and SP exists (R2 = 0.70) and that a cubic model that includes SP and OM resulted in the best model to predict BD in California soils. Inclusion of additional data may further strengthen this model or make it applicable for other grower regions.

Impact of Pyrolyzed and Unpyrolyzed Animal Manures on Soil Properties, Carbon Sequestration, and Clover Productivity in Andisol

The use of organic waste in agricultural soil can enhance crop yields, improve waste management, and boost soil carbon (C) sequestration. However, more field data are required to fully understand the impacts of pyrolyzed and unpyrolyzed animal manures. The objectives of this study were (i) to analyze the impact of two pyrolyzed and unpyrolyzed manures on soil properties, soil C storage, and clover productivity and (ii) to examine the biochar’s movement through the soil profile. Poultry litter (PL), dairy manure (DM), poultry litter biochar (PLBC), and dairy manure biochar (DBC) were applied at rates of 8 t ha−1 in a field experiment with red clover (Trifolium pratense L. var. Quiñequeli) in an Andisol. We monitored changes in soil chemical properties, foliar properties, and crop yield after three clover cuttings. To examine the movement of biochars through the soil profile, we set up a lab experiment where field conditions were simulated. PLBC, DBC, and PL increased soil pH by 0.5 (6.44), 0.28 (6.22), and 0.25 (6.19) units, respectively. Soil available P increased in both pyrolyzed and unpyrolyzed PL treatments (by 8.53 mg P kg−1, on average). Clover yields only increased in treatments with amendments that provided more available P and increased the pH. The addition of DBC increased soil total C (30.3%). Both biochars added to the soil surface exhibited little movement through the soil profile (2 to 4 cm). In this study, the pyrolysis of manures emerged as an option for reducing waste volume from the farming industry. Manure biochars proved useful at low rates for enhancing crop yields (PLBC) and storing C in the soil (DBC).

Different responses of lipids and lignin phenols to nitrogen addition in meadow grassland soil

Abstract Purpose Nitrogen (N) enrichment can affect the composition and stability of soil organic carbon (SOC) pools by altering vegetation and soil properties. However, the response of plant-derived carbon components in soil to different N addition levels is unclear. We investigated the changes and potential driving processes of plant-derived carbon components (especially lignins and lipids) in meadow grassland soils under long-term N addition in eastern Inner Mongolia, China. Materials and methods Biomarker technology was utilised to analyse changes in plant-derived carbon components (C>20 free lipids, bound lipids, and lignin phenols) in soil under different N addition levels, including changes in soil chemical properties, enzyme activity, plant biomass, and diversity under N addition, as well as the specific pathways involved. Results and discussion We found that high levels of N addition significantly reduced the concentration of soil lignin phenols whereas increased the accumulation of lipids (free and bound lipids). Compared with changes in plant biomass and diversity, soil chemical properties and enzyme activity play a more significant role in regulating the accumulation and degradation of plant-derived carbon. Structural equation modelling (SEM) showed that decreases in lignin phenol concentration were related to specific biochemical decomposition processes (increased polyphenol oxidase activity and decreased C/N). The increase in lipids associated with the protective effects of minerals mediated by pH. Conclusions In general, plant-derived carbon components showed inconsistent responses to N addition, lignin phenol concentration decreased and lipid concentration increased, which was mainly related to the change of soil biochemical properties. Plant-derived carbon components only showed significant changes under high N addition levels. Furthermore, our research indicates that SOC sequestration and functioning are highly dependent on soil biochemical properties, which weakens the influence of changes in plant carbon input on soil carbon storage.

Effects of UV/H2O2 degradation on Moringa oleifera Lam. leaves polysaccharides: Composition, in vitro fermentation and prebiotic properties on gut microorganisms

Moringa oleifera Lam. leaves are a new raw food material rich in polysaccharides. These polysaccharides exhibit various biological properties, including antioxidant, hypoglycemic and immunoregulatory effects. However, the use of Moringa oleifera Lam. leaves polysaccharides (MOLP) may be limited by their large molecular weight (MW) and presence of numerous impurities, such as pigments. Research has indicated that degraded polysaccharides usually exhibit high biological activity because of changes in physical structure and chemical properties. In this study, we focused on the extraction of a degraded-modified fraction from MOLP using the Ultraviolet/ Hydrogen peroxide (UV/H2O2) method. Specifically, the physicochemical properties and glycosidic bond composition of a particular fraction (UV/H2O2 degraded Moringa oleifera Lam. leaves polysaccharides in 3 h called DMOLP-3) were investigated. In addition, in vitro simulated digestion experiments showed that DMOLP-3 was only partially degraded during gastrointestinal digestion, indicating that DMOLP-3 can be utilised by gut microorganisms. Furthermore, the prebiotic properties of MOLP and DMOLP-3 was studied using an in vitro faecal fermentation model. The results indicated that compared with MOLP, DMOLP-3 led to a decrease in both the colour and MW of the polysaccharides. In addition, this model exhibited enhanced solubility and antioxidant capabilities while also influencing the surface morphology. Moreover, DMOLP-3 can facilitate the proliferation of advantageous microorganisms and enhance the synthesis of short-chain fatty acids (SCFAs). These results provide valuable insights into the utilization of bioactive components in Moringa oleifera Lam. leaves for the intestinal health.

Deterioration Valuation of Polymer Materials in UV-ozone Generator using Microwave Plasma

Various materials are used to sterilize medical instruments. Rubber and other products deteriorate owing to ozone and UV exposure. Ozone is capable of inactivating bacteria and fungi and is known to be effective in inactivating a wide range of viruses. Silent discharge is the mainstream method of ozone generation. The silent discharge method is also concerned with the generation of nitrogen oxides (NOX) caused by nitrogen molecules in the air, and the deterioration of electrodes during use poses a problem. Furthermore, nitrogen oxides react with water in the gaseous phase to produce nitric acid. Nitric acid reacts with several metals to form nitrates. A sterilization device using high concentrations of ozone has not been put to practical use because of the lack of an efficient method for decomposing ozone and the corrosion of metals. If a medical device is altered, it cannot be used as a sterilizing device. In this study, we exposed polymeric materials, which are often used in medical instruments, to ozone and UV light to determine whether their properties changed. Elution tests were conducted on polymeric medical materials from the viewpoints of their physical and chemical properties, functional decline, and biological safety. This study investigates changes in mechanical strength and surface chemical properties, representing the physical and chemical aspects.

Microbial viability and nutritional content of water kefir grains under different storage conditions

AbstractWater kefir grains are an important source of probiotics, mainly containing lactic acid bacteria and yeasts. The aim of this study is to investigate the changes in microbial and chemical properties of water kefir grains during 1‐month storage at +4°C and −18°C. The initial content of lactobacilli, lactococci, and yeast in water kefir grains was 6.06, 6.33, and 5.93 log CFU/g, respectively. The number of lactobacilli, Lactobacillus acidophilus, and Bifidobacterium spp. in the water kefir grains were comparable, with slight changes at the end of refrigerated storage (p > .05). Lactococci and yeasts decreased significantly after both storage conditions compared to the initial content (p < .05). The dry matter and ash contents remained unchanged during storage (p > .05). Water kefir grains contained significant amounts of calcium, vitamin B2, vitamin B6, vitamin B7, and vitamin B12. Storage at both +4°C and −18°C did not affect the mineral and vitamin contents, except for Cu and Vitamin B2. The results indicate that the water kefir grains remained viable after storage at both temperatures. If water kefir grains need to be stored, it is recommended to store them at +4°C in sugared water as it ensures better survivability of the microbiota of the grains.

Development of fermented beverage with citrus fruit extract using probiotics: impact on antioxidant activity and in vitro digestibility

Redhyang (Citrus hybrid ‘Kanpei’,CHK) is a subtropical citrus species introduced in Korea due to climate change. To enhance the nutritional value and usability of CHK as a processed food product, CHK extract was fermented with four types of commercial starters (YoFlex Harmony 1.0 (YFH), ABY-3 (ABY), YC-X11 (YXC), and YC-180 (YC)), and their antioxidant activities and changes in chemical properties during fermentation were investigated. The consumer acceptance of probiotic beverages containing fermented CHK extracts and their viability and antioxidant activity through in vitro digestion were also elucidated. The enumeration of lactic acid bacteria (LAB) in all samples after fermentation was above 7.60 log colony-forming units (CFU)/mL, with YC exhibiting the highest number after 24 h. Fermented CHK extracts containing higher levels of organic acids, total polyphenols, and flavonoids tended to exhibit higher antioxidant activities. YFH, ABY, and YC showed maximum antioxidant activity at 24 h, whereas YXC showed differences in the types of LAB at 12 h. After in vitro digestion, YXC showed higher antioxidant activity and LAB viability than the control. This result indicates that CHK extract fermented with YXC can increase antioxidant activity, bioactive ingredients, and sensory preference and positively impact the production of probiotic beverages.

Increasing gross primary productivity under soil warming and wetting on the Tibetan Plateau

The soil freeze-thaw process has undergone significant changes on the Tibetan Plateau (TP) in the context of global change, resulting in the changes of soil physical and chemical properties, thereby affecting the vegetation phenology and photosynthesis through affecting the utilization capacity of CO2 and light by vegetation. However, little is known about how soil temperature (ST) and soil moisture (SM) affect the gross primary productivity (GPP) on the TP at different seasons and elevations. In this study, the spatiotemporal variation patterns of GPP, ST, and SM were analyzed based on the Community Land Model version 5.0 (CLM5.0) simulations in order to illustrate the impacts of ST and SM in surface (0–10 cm) and root zone soil (0–100 cm) on GPP between 1979 and 2020. The results showed that the CLM5.0-based GPP and ST were in good agreement with in situ observations. ST, SM and GPP increased at the rates of 0.04 °C a−1, 2.4 × 10−4mm3 mm−3 a−1, and 5.36 g C m−2 a−2, respectively. SM dominated the variations of GPP in winter (64.3%), while ST almost was the dominant factor in other periods, especially spring (99.9%) and autumn (94.7%). The explanatory power of ST and SM for GPP increased with elevation, especially for ST. The relative contributions of ST and SM to GPP at different time scales in root zone soil were similar to those in surface soil. This study provided a new understanding of how soil freeze-thaw affected GPP changes on the TP in the context of the intensification of warming and humidification.

Zinc speciation in highly weathered tropical soils affected by large scale vegetable production

Agriculture in highly weathered tropical soils often requires considerable application of lime and fertilizers to ensure satisfactory plant nutrient levels. The consequences of these continue long-term applications is not well understood may induce changes in soil chemical properties, the abundance, and speciation of potentially toxic trace element and as well as of micronutrients in agriculture soils. In this study, we evaluated the adsorption (at pH 5) and speciation of Zn in tropical soils (both agricultural and native vegetation) as a function of fertilization and contact time using chemical fractionation analyses and X-ray absorption spectroscopy. The soils overall had high Zn adsorption capacities (∼ 700 mg kg-1), but the agricultural soil was approximately 30 % higher than of the soil under native vegetation, and the proportion of Zn in the mobile fraction was 35 % in native vegetation and 21 % in agricultural soils. Zn speciation via linear combination analysis showed a strong relationship with soil mineralogical composition and reveled that Zn associated with organic matter decreased while Zn associated with P increased after the conversion of soils from native vegetation to highly fertilized soil. Aluminosilicate soil minerals were identified as major sinks of soil Zn, accounting for 34 % of total Zn retention regardless of soil origin and land use. Association of Zn with phosphate (i.e., hopeite) was observed in the agricultural soil samples, which might be an unexpected Zn-bearing mineral in highly weathered tropical soils and could have impacts on Zn plant nutrition.

Study on the evaporation performance of concentrated desulfurization wastewater and its products analysis

Concentrated desulfurization wastewater evaporation technology exhibited significant superiority in desulfurization wastewater zero discharge. Nevertheless, changes of physical and chemical properties of the concentrated wastewater shifts evaporation mode during wastewater evaporation, which may cause difficulty in disposing of evaporation products. In this work, the rotary spray drying pilot test experimental platform was utilized to investigate the evaporation performance of concentrated desulfurization wastewater. The results indicate that, while the evaporation rate of concentrated wastewater is lower than that of non-concentrated wastewater, its lower free water volume resulting in the improved evaporation performance. Increasing the inlet flue gas temperature, gas-liquid ratio, and prolonging the residence time of flue gas can promote droplet evaporation. Besides, the evaporation products were analyzed by various characterization techniques. The elemental composition and particle size of concentrated wastewater evaporation products change. At a moisture content of 2 %, the Flowability Function is 3.57 (2 < FF < 4), indicating a cohesive nature and poorer flowability compared to the non-concentrated wastewater.

Single-Cell Caspase-3 Measurement Using a Biomimetic Nanochannel.

Direct single-cell caspase-3 (Casp-3) analysis has remained challenging. A study of single-cell Casp-3 could contribute to revealing the fundamental pathogenic mechanisms in Casp-3-associated diseases. Here, a biomimetic nanochannel capable of single-cell sampling and ionic detection of intracellular Casp-3 is devised, which is established upon the installment of target-specific organic molecules (luc-DEVD) within the orifice of a glass nanopipette. The specific cleavage of luc-DEVD by Casp-3 could induce changes of inner-surface chemical groups and charge properties, thus altering the ionic response of the biomimetic nanochannel for direct Casp-3 detection. The practical applicability of this biomimetic nanochannel is confirmed by probing intracellular Casp-3 fluctuation upon drug stimulation and quantifying the Casp-3 evolution during induced apoptosis. This work realizes ionic single-cell Casp-3 analysis and provides a different perspective for single-cell protein analysis.