Mechanism Of Chain Growth Research Articles

Electrochemical reduction of nitrate to ammonia using Fe-based catalyst: Insights into N2, CO2, and CO environments

Electrochemical (EC) reduction of nitrate/nitrite for ammonia production is a key area of research in the realm of nitrogen pollutant treatment and recycling efforts. In this study, we utilized a commercial Fe(Mn) alloy to investigate EC reductions of nitrate/nitrite ions under N2, CO, and CO2-saturated conditions, shedding light on the influences of different feeding gases. Under N2 conditions, the ammonia production Faradaic efficiency (FE) reached 60 %; however, it significantly decreased under CO2 conditions. The presence of CO as a feeding gas proved detrimental, resulting in no ammonia production. Surprisingly, the Fe(Mn) alloy demonstrated superior EC Fischer-Tropsch (F-T) synthesis chemistry under CO conditions, generating CH4 and long-chain hydrocarbons (CnH2n+2 and CnH2n, where n=2–7). This contrasts with existing literature, where such alloys typically perform better under CO2 conditions. Notably, alkanes were found to be more predominant than their corresponding alkenes. The Anderson-Schulz-Flory equation plots exhibited significant linearity, resembling the traditional Fischer-Tropsch chain growth mechanism. This original discovery introduces new possibilities for employing commercial-grade Fe alloy in the direct EC F-T synthesis using CO, facilitating the production of long-chain hydrocarbons. Moreover, it paves the way for nitrate/nitrite ion treatments in analogous processes within diverse gas environments.

Simultaneous Color- and Dose-Controlled Thiol-Ene Resins for Multimodulus 3D Printing with Programmable Interfacial Gradients.

Drawing inspiration from nature's own intricate designs, synthetic multimaterial structures have the potential to offer properties and functionality that exceed those of the individual components. However, several contemporary hurdles, from a lack of efficient chemistries to processing constraints, preclude the rapid and precise manufacturing of such materials. Herein, the development of a photocurable resin comprising color-selective initiators is reported, triggering disparate polymerization mechanisms between acrylate and thiol functionality. Exposure of the resin to UV light (365nm) leads to the formation of a rigid, highly crosslinked network via a radical chain-growth mechanism, while violet light (405nm) forms a soft, lightly crosslinked network via an anionic step-growth mechanism. The efficient photocurable resin is employed in multicolor digital light processing 3D printing to provide structures with moduli spanning over two orders of magnitude. Furthermore, local intensity (i.e., grayscale) control enables the formation of programmable stiffness gradients with ≈150× change in modulus occurring across sharp (≈200µm) and shallow (≈9mm) interfaces, mimetic of the human knee entheses and squid beaks, respectively. This study provides composition-processing-property relationships to inform advanced manufacturing of next-generation multimaterial objects having a myriad of applications from healthcare to education.

Impact of Temperature on the Self-Assembly of Fibrinogen in Thrombin-Free Solutions.

Self-assembly of thrombin-free solutions of fibrinogen can be triggered not only by a drop in the ionic strength but also by an appropriate decrease in temperature. Accordingly, an in situ study of self-assembly of fibrinogen in saline buffered solution is carried out by means of time-resolved light scattering providing the molar mass, geometric size, and hydrodynamic radius of the growing intermediates. The resulting data provide access to the morphology of the intermediates and to the mechanism in which these intermediates grow during the early stages of self-assembly. Modeling the results of concentration dependent experiments based on temperature gradients in terms of a chain growth mechanism leads to the corresponding molar standard enthalpy and entropy of aggregation.

Metallosupramolecular Multiblock Copolymers of Lanthanide Complexes by Seeded Living Polymerization.

Supramolecular block copolymers, derived via seeded living polymerization, are increasingly recognized for their rich structural and functional diversity, marking them as cutting-edge materials. The use of metal complexes in supramolecular block copolymerization not only offers a broad range of block copolymers through the structural similarity in the coordination geometry of the central metal ion but also controls spectroscopic properties, such as emission wavelength, emission strength, and fluorescence lifetime. However, the exploration of metallosupramolecular multiblock copolymerization based on metal complexes remains quite limited. In this work, we present a pioneering synthesis of metallosupramolecular multiblock copolymers utilizing Eu3+ and Tb3+ complexes as building blocks. This is achieved through the strategic manipulation of nonequilibrium self-assemblies via a living supramolecular polymerization approach. Our comprehensive exploration of both thermodynamically and kinetically regulated metallosupramolecular polymerizations, centered around Eu3+ and Tb3+ complexes with bisterpyridine-modified ligands containing R-alanine units and a long alkyl group, has highlighted intriguing behaviors. The monomeric [R-L1Eu(NO3)3] complex generates a spherical structure as the kinetic product. In contrast, the monomeric [R-L1Eu2(NO3)6] complex generates fiber aggregates as a thermodynamic product through intermolecular interactions such as π-π stacking, hydrophobic interaction, and H-bonds. Utilizing the Eu3+ complex, we successfully conducted seed-induced living polymerization of the monomeric building unit under kinetically regulated conditions. This yielded a metallosupramolecular polymer of precisely controlled length with minimal polydispersity. Moreover, by copolymerizing the kinetically confined Tb3+ complex state ("A" species) with a seed derived from the Eu3+ complex ("B" species), we were able to fabricate metallosupramolecular tri- and pentablock copolymers with A-B-A, and B-A-B-A-B types, respectively, through a seed-end chain-growth mechanism.

Nickel as Electrocatalyst for CO(2) Reduction: Effect of Temperature, Potential, Partial Pressure, and Electrolyte Composition.

Electrochemical CO2 reduction on Ni has recently been shown to have the unique ability to produce longer hydrocarbon chains in small but measurable amounts. However, the effects of the many parameters of this reaction remain to be studied in more detail. Here, we have investigated the effect of temperature, bulk CO2 concentration, potential, the reactant, cations, and anions on the formation of hydrocarbons via a chain growth mechanism on Ni. We show that temperature increases the activity but also the formation of coke, which deactivates the catalyst. The selectivity and thus the chain growth probability is mainly affected by the potential and the electrolyte composition. Remarkably, CO reduction shows lower activity but a higher chain growth probability than CO2 reduction. We conclude that hydrogenation is likely to be the rate-determining step and hypothesize that this could happen either by *CO hydrogenation or by termination of the hydrocarbon chain. These insights open the way to further development and optimization of Ni for electrochemical CO2 reduction.

Free radical (Co)Polymerization of aromatic vinyl monomers derived from vanillin

Chemical structure (effect of functional substituents on vinyl bond reactivity) was used as a criterion to evaluate the (co)polymerization behavior of vanillin-derived 3-allyl-5-vinylveratrole, 4-vinylveratrole, and 2-glycidoxy-5-vinylanisole in chain-growth polymerization mechanism. After polymerization, allyl and epoxy functional groups of monomer units remain unaffected as macromolecular side groups and can be utilized in post-polymerization reactions (in particular, cross-linking). Due to the intermolecular chain transfer to polymer, a fraction of branched macromolecules can be formed in free radical polymerization of 3-allyl-5-vinylveratrole. At the same time, the kinetic study shows a similar polymerization rate for all the three investigated biobased aromatic vinyl monomers.Determined in copolymerization with methyl methacrylate Q-e values indicate that 3-allyl-5-vinylveratrole, 4-vinylveratrole and 2-glycidoxy-5-vinylanisole behave like conventional vinyl monomers and can be copolymerized interchangeably. In this manner, macromolecules with controlled amounts of cross-linkable epoxy and allyl groups incorporated into the backbone can be synthesized. Based on the glass transition temperature of the homopolymers thereof (66–93 °C), biobased aromatic vinyl monomers can serve as “rigid” macromolecular fragments and be applied in the formulation of thermoset polymer coatings. Being derived from renewable resources, 3-allyl-5-vinylveratrole, 4-vinylveratrole, and 2-glycidoxy-5-vinylanisole can be considered as a replacement for petroleum-based commodity styrene in the production of various industrial polymeric materials that utilize aromatic monomers.

Improving the Sulfurophobicity of the NiS-Doping CoS Electrocatalyst Boosts the Low-Energy-Consumption Sulfide Oxidation Reaction Process.

Producing sulfur from a sulfide oxidation reaction (SOR)-based technique using sulfide aqueous solution has attracted considerable attention due to its ecofriendliness. This study demonstrates that NiS-doped cobalt sulfide NiS-CoS-supported NiCo alloy foam can deliver the SOR with superior electrocatalytic activity and robust stability compared to reported non-noble metal-based catalysts. Only 0.34 V vs RHE is required to drive a current density of 100 mA cm-2 for the SOR. According to the experiment, the catalyst exhibits a unique sulfurophobicity feature because of the weak interaction between sulfur and the transition metal sulfide (low affinity for elemental sulfur), preventing electrode corrosion during the SOR process. More impressively, the chain-growth mechanism of the SOR from short- to long-chain polysulfides was revealed by combining electrochemical and spectroscopic in situ methods, such as in situ ultraviolet-visible and Raman. It is also demonstrated that electrons can transfer straight from the sulfion (S2-) to the active site on the anode surface during the low-energy-consumption SOR process. This work provides new insight into simultaneous energy-saving hydrogen production and high-value-added S recovery from sulfide-containing wastewater.

Combining Step-Growth and Chain-Growth Polymerizations in One Pot: Light-Induced Fabrication of Conductive Nanoporous PEDOT-PCL Scaffold.

A novel method based on light-induced fabrication of a poly (3,4-ethylenedioxythiophene)-polycaprolactone (PEDOT-PCL) scaffold using phenacyl bromide (PAB) as a single-component photoinitiator is presented. HBr released from the step-growth polymerization of EDOT is utilized asan in situcatalyst for the chain-growth polymerization of ε-caprolactone. Detailed investigations disclose the formation of a self-assembled nanoporous electroconductive scaffold (1.2 mScm-1 ). Fluorescence emission spectra of the fabricated scaffold exhibit a mixed solvatochromic behavior, indicating specific interactions between the self-assembled scaffold and solvents with varying polarities, as evidenced by transmission electron microscopy (TEM). Moreover, the same light-induced technique can also be applied for bulk photopolymerization showcasing the versatility and wide-ranging scope of the originated method. In brief, this study introduces a novel approach for light-induced polymerization reactions that is merging step-growth and chain-growth mechanisms. This innovative approach is promising to facilitatein situpolymerization of monomers possessing diverse functionalities.

Photo-crosslinkable Poly(aspartic acid) for Light-based additive Manufacturing: Chain-growth versus Step-growth crosslinking

Crosslinked poly(aspartic acid) (pAsp) hydrogels have been evaluated in various applications benefitting from their biocompatibility and biodegradability. Several crosslinking mechanisms for pAsp derivatives have been investigated, yet research focusing on functionalization of pAsp with photo-crosslinkable moieties is scarce. However, the latter would be beneficial for processing of pAsp through light-based additive manufacturing techniques. pAsp was functionalized comparing two types of photo-crosslinkable moieties (i.e. norbornene versus methacrylate), resulting in a thiol-ene step-growth crosslinking mechanism and a chain-growth mechanism, respectively. The influence of the crosslinking mechanism on the photo-crosslinking kinetics, mechanical properties and biocompatibility of the hydrogels was studied. Hydrogels based on norbornene-modified pAsp with Li-TPO-L photo-initiator and a thiol-based crosslinker showed fast crosslinking kinetics and a high swelling ratio, along with a relatively low storage modulus of 29.4 ± 1.3 kPa. Methacrylate-modified pAsp formulations with Li-TPO-L crosslinked slower and exhibited a lower swelling ratio, yet a higher storage modulus (135.1 ± 4.7 kPa). Both hydrogel materials were non-cytotoxic to cells growing in their vicinity. The applicability of the hydrogels to serve as materials for digital light processing (DLP) and two-photon polymerization (2PP) was elucidated. Both materials were processable via DLP and 2PP, offering possibilities towards processing of these materials into constructs serving biomedical applications.

Mass spectrometry insight into the electro-copolymerization mechanism of aniline with o-phenylenediamine

It has been a challenge to accurately characterize the chain growth mechanism during copolymerization. Herein, an electrochemistry-microtube-mass spectrometry (EC-mTube-MS) was developed for on-line monitoring of aniline (ANI) electro-copolymerized with o-phenylenediamine (oPD). Short-lived intermediates and co-oligomers belonging to polyANI-oPD were structural identified with tandem MS method for the first time. The free binding between ANI and oPD monomers determined the presence of more species for a given co-n-mer. Chain growth was found to compete with 2H+, 2e− intramolecular oxidation of co-oligomers, resulting in the units with quinone or phenazine structures. MS signals for polyANI and polyoPD were observed as well, indicating that the homopolymerization occurred simultaneously with the copolymerization, which may affect the formation efficiency even performance of the final copolymer. Investigations on the monomer feed ratio and solution pH provided data support for improving the copolymerization efficiency, and the recommended parameters are cANI: coPD ≥ 10:1 and pH = 7.

Protecting-Group-Free Iterative Divergent/Convergent Method for Preparing Sequence-Defined Polymers

A new iterative growth method is reported to prepare monodisperse sequence-defined polymers by combining the chain growth mechanisms of the traditional iterative sequential growth (ISG) and iterative exponential growth (IEG) strategies. Using three orthogonal click reactions to couple three groups of monomers, each containing two orthogonal clickable groups. This method grows monodisperse sequence-defined polymers in a protecting-group-free divergent/convergent way. Each iterative cycle of this method involves two divergent sequential growth steps and one convergent exponential growth step, which endows the new method with the chain growth advantages of both traditional ISG and IEG. The two divergent sequential growth reactions introduce new monomer structures into main chains and provide the resultant sequence-defined polymers with varied monomer sequences, while the convergent exponential growth reaction guarantees the method a fast chain growth speed. The repetition of the abovementioned iterative cycle allows this method to grow monodisperse sequence-defined polymers with a fast chain growth manner of 3 × 2n–2.

Polypeptide Chain Growth Mechanisms and Secondary Structure Formation in Glycine Gas-Phase Deposition on Silica Surfaces.

Peptide formation by amino acids condensation represents a crucial reaction in the quest of the origins of life as well as in synthetic chemistry. However, it is still poorly understood in terms of efficiency and reaction mechanism. In the present work, peptide formation has been investigated through thermal condensation of gas-phase glycine in fluctuating silica environments as a model of prebiotic environments. In-situ IR spectroscopy measurements under a controlled atmosphere reveal that a humidity fluctuating system subjected to both temperature and water activity variations results in the formation of more abundant peptides compared to a dehydrated system subjected only to temperature fluctuations cycles. A model is proposed in which hydration steps result in the hydrolysis and redistribution of the oligomers formed during previous deposition in dry conditions. This results in the formation of self-assembled aggregates with well-defined secondary structures (especially β-sheets). Upon further monomers feeding, structural elements are conserved in newly growing chains, with indications of templated polymerization. The structural dynamics of peptides were also evaluated. Rigid self-assembled structures with a high resistance to further wetting/drying cycles and inaccessibility to isotopic exchange were present in the humidity fluctuating system compared to more flexible structures in the dehydrated system. The resistance and growth of self-assembled structures were also investigated for an extended duration of Gly deposition using isotope labeling.

Controlled reductive C-C coupling of isocyanides promoted by an aluminyl anion.

We report the reaction of the potassium aluminyl, K[Al(NON)] ([NON]2- = [O(SiMe2NDipp)2]2-, Dipp = 2,6-iPr2C6H3) with a series of isocyanide substrates (R-NC). In the case of tBu-NC, degradation of the isocyanide was observed generating an isomeric mixture of the corresponding aluminium cyanido-κC and -κN compounds, K[Al(NON)(H)(CN)]/K[Al(NON)(H)(NC)]. The reaction with 2,6-dimethylphenyl isocyanide (Dmp-NC), gave a C3-homologation product, which in addition to C-C bond formation showed dearomatisation of one of the aromatic substituents. In contrast, using adamantyl isocyanide Ad-NC allowed both the C2- and C3-homologation products to be isolated, allowing a degree of control to be exercised over the chain growth process. These data also show that the reaction proceeds through a stepwise addition, supported in this study by the synthesis of the mixed [(Ad-NC)2(Dmp-NC)]2- product. Computational analysis of the bonding within the homologised products confirm a high degree of multiple bond character in the exocyclic ketenimine units of the C2- and C3-products. In addition, the mechanism of chain growth was investigated, identifying different possible pathways leading to the observed products, and highlighting the importance of the potassium cation in formation of the initial C2-chain.

Exploring coverage-dependent chain-growth mechanisms on Ru(111) for Fischer–Tropsch synthesis

The chain growth mechanisms of Fischer–Tropsch synthesis (FTS) remain a controversial topic, especially considering the much stronger adsorption ability of CO over H2, resulting in CO pre-adsorption or saturation.

An optimal Fe-C coordination ensemble for hydrocarbon chain growth: a full Fischer-Tropsch synthesis mechanism from machine learning.

Fischer-Tropsch synthesis (FTS, CO + H2 → long-chain hydrocarbons) because of its great significance in industry has attracted huge attention since its discovery. For Fe-based catalysts, after decades of efforts, even the product distribution remains poorly understood due to the lack of information on the active site and the chain growth mechanism. Herein powered by a newly developed machine-learning-based transition state (ML-TS) exploration method to treat properly reaction-induced surface reconstruction, we are able to resolve where and how long-chain hydrocarbons grow on complex in situ-formed Fe-carbide (FeCx) surfaces from thousands of pathway candidates. Microkinetics simulations based on first-principles kinetics data further determine the rate-determining and the selectivity-controlling steps, and reveal the fine details of the product distribution in obeying and deviating from the Anderson-Schulz-Flory law. By showing that all FeCx phases can grow coherently upon each other, we demonstrate that the FTS active site, namely the A-P5 site present on reconstructed Fe3C(031), Fe5C2(510), Fe5C2(021), and Fe7C3(071) terrace surfaces, is not necessarily connected to any particular FeCx phase, rationalizing long-standing structure-activity puzzles. The optimal Fe-C coordination ensemble of the A-P5 site exhibits both Fe-carbide (Fe4C square) and metal Fe (Fe3 trimer) features.

Unravelling the chain growth mechanism in Cr/NNN-catalysed ethylene oligomerization

Density functional theory (DFT) methods were employed to explore the inherent chain growth mechanism targeting a special and controversial Cr/NNN ethylene oligomerization system.

PAAm/CMC/nanoclay nanocomposite hydrogel: understanding the influence of initiators on the chain-growth mechanisms

PAAm/CMC/nanoclay nanocomposite hydrogel: understanding the influence of initiators on the chain-growth mechanisms

Synthesis of highly deuterated coniferyl alcohol for silencing of NMR signals in the resulting dehydrogenative polymer

To establish a facile methodology for the elucidation of the lignin chain-growth mechanism, the preparation of monolignol that does not show NMR signals in the dehydrogenative polymer (DHP) was attempted. As a monolignol of which aliphatic moieties were deuterated, coniferyl alcohol-d7 was successfully synthesized from protocatechualdehyde and malonic acid via the modified Knoevenagel–Doebner reaction and the Luche reduction. The process achieved high to excellent deuteration efficiencies at the aimed positions (i.e., methoxy: > 99%D, α: > 99%D, β: 92%D, and γ: 98%D). DHP was prepared solely from coniferyl alcohol-d7, and its NMR spectra were compared with those from coniferyl alcohol. The results indicated that: (1) the deuterium atoms at methoxy group, α- and β-positions were highly retained even in the DHP, and their signals were effectively suppressed; (2) a part of the deuterium at γ-position was replaced with H through the reaction; (3) meanwhile, the formation of γ-CH2 was negligible. This study demonstrated that coniferyl alcohol-d7 could “silence” the majority of the signals even when converted to DHP. Highly deuterated monolignols can be a unique molecular tool that can differentiate the signals of interest from those derived from monolignols.

Reaction chemistry of ethanol oligomerization to distillate-range molecules using low loading Cu/MgxAlOy catalysts

We study ethanol oligomerization to higher alcohols and other oxygenates with a 0.3 wt. %Cu/Mg2.9AlO catalyst. This reaction involves more than 130 products in a complicated reaction network. The selectivity towards diesel fuel precursor compounds (hereafter ‘DFPC’) increased with conversion until reaching a plateau at an ethanol conversion of ~70 %. Alcohol selectivity was found to follow Schultz-Flory distribution at all studied conversions. Larger sized alcohols then are formed mostly by chain-growth mechanisms via surface reactions of adsorbed oligomers with ethanol-based monomers. Higher esters are formed from alcohols and aldehydes in a series reaction mechanism. Moreover, C6+ ester and C4+ ketones selectivities increase as conversion increases. We also found that C4+ alcohols most likely undergo Guerbet coupling with the studied catalyst to form even higher alcohols once, and that the oxygen of these alcohols is active as a nucleophile, resulting in the selective formation of esters if the starting alcohol is branched. Finally, we performed several cofeed studies varying ethanol-to-H2 inlet partial pressures, and adding acetaldehyde and ethyl acetate as cofeeds to ethanol at different concentrations. We conclude from these experiments that acetaldehyde concentration controls reaction chemistry, with conditions favoring larger concentrations of the molecule promoting both alcohol coupling and ester formation, and conditions leading to lower concentrations of acetaldehyde resulting in higher alcohol selectivity at the expense of esters and higher aldehydes.

Degradable click-reaction-based polymers as highly functional materials

The efficient development of functional and sustainable polymers not only requires rapid formation under mild conditions but also a high degree of control over the polymer structure, as well as gentle degradation routes that do not diminish their function. A significant step forward was set by the groups of Wu and Sharpless, as outlined in <i>ACS Central Science</i>, in which they use sulfur exchange click chemistry to access polymers via a chain-growth mechanism and pave the way toward mild degradation and application as degradable gels.