CF CO Research Articles

Effect of steam concentration on demineralized coal char surface behaviors and structural characteristics during the oxy-steam combustion process

Abstract Oxy-steam combustion, fuel combusts in O2/H2O atmosphere, is treated to be a novel and promising technology for the next generation oxy-fuel combustion. The purpose of this study is to identify the effects of steam concentration on NO emission characteristics, functional group distribution and char NO reducibility during oxy-steam combustion process. A typical bituminous coal (SH) was employed for demineralization, devolatilization, combustion in O2/H2O environment, and investigated by Temperature Programmed Desorption/Reduction (TPD/TPR) methods and Raman spectrometer. The combustion results illustrated that char N/NO conversion during the oxy-steam combustion tests initially decreased with an increasing steam concentration in low range (1.2–8.5 vol.%), while increased apparently in high steam range (8.5–20 vol.%). Decomposition of H2O molecules promoted the formation of C(O) and small aromatic rings on particle surface at the low steam range; the high concentration of steam could promote the condensation of aromatic ring structures in char, leading to significant generation of large aromatic ring structures with a lower reactivity and the reduction of surface active sites (Cf). The TPD results illustrated that the chars oxidized at moderate steam concentration (8.5 vol.%), and the chars with moderate burnout degrees (such as S3, S6 and S11) had the largest amount of C(O). Due to the decomposition of the C(O) into new Cf and massive CO molecules, a rapid acceleration of NO reduction rate occurred in the temperature range of 1000–1400 K during the TPR process of each sample obtained from identical reaction conditions. Thus, variations in char surface behavior and microstructure might be the primary reasons affecting char-N emission.

Bidirectional Regulation of Halide Binding in a Heterometallic Supramolecular Cube

Complex cubes: In a cationic supramolecular cube, coordinatively unsaturated metal centers in the walls of the host provided binding sites for neutral or negatively charged guests. The binding of an initial guest (CF CO, OPMe, NH, or NMe) either cooperatively enhanced or competitively inhibited the binding of a second guest (halide ion).

Reactions of Acids with Naphthyridine-Functionalized Ferrocenes: Protonation and Metal Extrusion

Reaction of 1,8-naphthyrid-2-yl-ferrocene (FcNP) with a variety of acids affords protonated salts at first, whereas longer reaction time leads to partial demetalation of FcNP resulting in a series of Fe complexes. The corresponding salts [FcNP·H][X] (X = BF(4) or CF(3)SO(3) (1)) are isolated for HBF(4) and CF(3)SO(3)H. Reaction of FcNP with equimolar amount of CF(3)CO(2)H for 12 h affords a neutral complex [Fe(FcNP)(2)(O(2)CCF(3))(2)(OH(2))(2)] (2). Use of excess acid gave a trinuclear Fe(II) complex [Fe(3)(H(2)O)(2)(O(2)CCF(3))(8)(FcNP·H)(2)] (3). Three linear iron atoms are held together by four bridging trifluoroacetates and two aqua ligands in a symmetric fashion. Reaction with ethereal solution of HCl afforded [(FcNP·H)(3)(Cl)][FeCl(4)](2) (4) irrespective of the amount of the acid used. Even the picric acid (HPic) led to metal extrusion giving rise to [Fe(2)(Cl)(2)(FcNP)(2)(Pic)(2)] (5) when crystallized from dichloromethane. Metal extrusion was also observed for CF(3)SO(3)H, but an analytically pure compound could not be isolated. The demetalation reaction proceeds with an initial proton attack to the distal nitrogen of the NP unit. Subsequently, coordination of the conjugate base to the electrophilic Fe facilitates the release of Cp rings from metal. The conjugate base plays an important role in the demetalation process and favors the isolation of the Fe complex as well. The 1,1'-bis(1,8-naphthyrid-2-yl)ferrocene (FcNP(2)) does not undergo demetalation under identical conditions. Two NP units share one positive charge causing the Fe-Cp bonds weakened to an extent that is not sufficient for demetalation. X-ray structure of the monoprotonated FcNP(2) reveals a discrete dimer [(FcNP(2)·H)](2)[OTf](2) (6) supported by two N-H···N hydrogen bonds. Crystal packing and dispersive forces associated with intra- and intermolecular π-π stacking interactions (NP···NP and Cp···NP) allow the formation of the dimer in the solid-state. The protonation and demetalation reactions of FcNP and FcNP(2) with a variety of acids are reported.

Bis[5-(pyridin-2-yl)pyrazine-2-carbonitrile-κ2N4,N5](trifluoroacetato-κO)silver(I)

In the asymmetric unit of the title compound, [Ag(C10H6N4)2(CF3CO2)], there two mononuclear but slightly different complex units. In each, two κ2 N:N-chelating 5-(pyridin-2-yl)pyrazine-2-carbonitrile ligands surround the AgI atom, giving an N4O square-pyramidal coordination geometry with one trifluoro­acetate O atom at the apex. The difference between the two lies in the Ag—N bond lengths: in one complex, three normal [range 2.272 (5)–2.552 (5) Å] and one long [2.706 (4) Å] and in the second, two normal [2.254 (5) and 2.290 (5) Å] and two long [2.647 (5) and 2.675 (5) Å] are present. Short inter­molecular F⋯F contacts [2.586 (4) Å] and weak π–π stacking inter­actions [minimum ring centroid separation 3.836 (5) Å] between pyridyl and pyrazinyl rings connect the complex units, forming columns which extend along the b-axis direction.

Anion-Controlled Circular Dichroism Spectral Changes in Hg2+ Complexes with a Chiral Bidentate Ligand

Anion-controlled circular dichroism (CD) spectral changes in Hg(2+) complexes with a chiral bidentate ligand are reported. Although the Hg(CF(3)SO(3))(2) and Hg(CF(3)CO(2))(2) complexes with (R)-(-)-1-(naphthalen-1-yl)-N,N-bis(pyridin-4-ylmethyl)ethanamine, (R)-(-)-1, show significant CD spectral changes, no CD spectral changes were observed in the HgCl(2), HgBr(2), Hg(CN)(2), or Hg(CH(3)CO(2))(2) complexes. X-ray analysis indicates that both the (R)-(-)-1-Hg(CF(3)SO(3))(2) and (R)-(-)-1-HgCl(2) complexes form a coordination polymer and a discrete 2:3 [=(R)-(-)-1/HgCl(2)] complex with a figure-eight structure. X-ray crystallography revealed that (i) the Hg-Hg distances bridged by anions vary depending on the anions used and (ii) a coordination polymer cannot be formed when the Hg-Hg distances are too short. Therefore, the formation of a coordination polymer is required to give the observed significant CD spectral changes.

Palladium Catalyzed C–H Functionalization of O-Arylcarbamates: Selective ortho-Bromination Using NBS

A series of cyclometalated palladium complexes derived from O-phenylcarbamates has been synthesized by the reaction of the respective carbamates with Pd(OAc)(2) in the presence of acids, CF(3)CO(2)H, CF(3)SO(3)H, and p-TsOH. The palladacycles were observed to coordinate amines and electron rich anilines but not sulfonamides or carboxamides. Analysis of the (t)Bu-NH(2) adduct of the palladacycle 2b (2b·(t)Bu-NH(2)) by NMR spectroscopy (NOE) revealed a cis-coordination of the amine. However, the amine adducts failed to undergo ortho-amination (C-N bond formation) under varied reaction conditions. Notably, the palladacycle 1d was found to react efficiently with N-iodosuccinimide (NIS) to yield the ortho-iodinated carbamate, 1e. More significantly, this reaction can be extended to a palladium-catalyzed ortho C-H bromination of aryl-O-carbamates even at 5 mol % loading of Pd(OAc)(2) using N-bromosuccinimide (NBS).

Palladium-Catalyzed Substitution and Cross-Coupling of Benzylic Fluorides

Benzylic fluorides are suitable substrates for Pd(0)-catalyzed Tsuji-Trost substitution using carbon, nitrogen, oxygen, and sulfur nucleophiles and for cross-coupling with phenylboronic acid. For the bifunctional substrate 4-chlorobenzyl fluoride, fine-tuning of the reaction conditions allows for the regioselective displacement of either the chlorine or fluorine substituent. The leaving group ability of fluoride vs other groups displaced in substitution is CF(3)CO(2) ≈ p-NO(2)C(6)H(4)CO(2) ≈ OCO(2)CH(3) > F > CH(3)CO(2), a ranking similar to allylic fluorides under Pd catalysis.

Heterodinuclear Metal Arrangement in a Flat Macrocycle with Two Chemically- Equivalent Metal Chelating Sites

A phenanthroline-based macrocycle 1 has been newly developed which has two chemically equivalent metal chelating sites within the spatially restricted cavity for dinuclear metal arrangement. The macrocycle 1 reacts with Zn(CF(3)CO(2))(2) or ZnCl(2) to form homodinuclear Zn(II)-complexes. A single-crystal X-ray structural analysis of the resulting Zn(2)1(CF(3)CO(2))(4) determined the complex structure in which two Zn(II) ions are bound by two phenanthroline sites and two CF(3)CO(2)(-) ions bind to each Zn(II) ion in a tetrahedral geometry. Similarly, a homodinuclear Cu(I)-macrocycle was formed from 1 and Cu(CH(3)CN)(4)BF(4). Notably, from 1 and an equimolar mixture of Cu(CH(3)CN)(4)BF(4) and Zn(CF(3)CO(2))(2), a heterodinuclear Cu(I)-Zn(II)-macrocycle was exclusively formed in high yield (>90%) because of the relatively low stability of the dinuclear Cu(I)-macrocycle. A heterodinuclear Ag(I)-Zn(II)-macrocycle was similarly formed with fairly high selectivity from a mixture of Ag(I) and Zn(II) ions. Such selective heterodinuclear metal arrangement was not observed with other combinations of M-Zn(II) (M = Li(I), Mg(II), Pd(II), Hg(II), La(III), and Tb(III)).

Forming trifluoromethylmetallates: competition between decarboxylation and C–F bond activation of group 11 trifluoroacetate complexes, [CF3CO2ML

A combination of gas-phase 3D quadrupole ion trap mass spectrometry experiments and density functional theory (DFT) calculations have been used to examine the mechanism of thermal decomposition of fluorinated coinage metal carboxylates. The precursor anions, [CF(3)CO(2)MO(2)CCF(3)](-) (M = Cu, Ag and Au), were introduced into the gas-phase via electrospray ionization. Multistage mass spectrometry (MS(n)) experiments were conducted utilizing collision-induced dissociation, yielding a series of trifluoromethylated organometallic species and fluorides via the loss of CO(2), CF(2) or "CF(2)CO(2)". Carboxylate ligand loss was insignificant or absent in all cases. DFT calculations were carried out on a range of potentially competing fragmentation pathways for [CF(3)CO(2)MO(2)CCF(3)](-), [CF(3)CO(2)MCF(3)](-) and [CF(3)CO(2)MF](-). These shed light on possible products and mechanisms for loss of "CF(2)CO(2)", namely, concerted or step-wise loss of CO(2) and CF(2) and a CF(2)CO(2) lactone pathway. The lactone pathway was found to be higher in energy in all cases. In addition, the possibility of forming [CF(3)MCF(3)](-) and [CF(3)MF](-), via decarboxylation is discussed. For the first time the novel fluoride complexes [FMF](-), M = Cu, Ag and Au have been experimentally observed. Finally, the decomposition reactions of [CF(3)CO(2)ML](-) (where L = CF(3) and CF(3)CO(2)) and [CH(3)CO(2)ML](-) (where L = CH(3) and CH(3)CO(2)) are compared.

Dipyridyl β-diketonate complexes and their use as metalloligands in the formation of mixed-metal coordination networks

The iron(III) and aluminium(III) complexes of 1,3-di(4-pyridyl)propane-1,3-dionato (dppd) and 1,3-di(3-pyridyl)propane-1,3-dionato (dmppd), [Fe(dppd)(3)] 1, [Fe(dmppd)(3)] 2, [Al(dppd)(3)] 3 and [Al(dmppd)(3)] 4 have been prepared. These complexes adopt molecular structures in which the metal centres contain distorted octahedral geometries. In contrast, the copper(II) and zinc(II) complexes [Cu(dppd)(2)] 5 and [Zn(dmppd)(2)] 6 both form polymeric structures in which coordination of the pyridyl groups into the axial positions of neighbouring metal centres links discrete square-planar complexes into two-dimensional networks. The europium complex [Eu(dmppd)(2)(H(2)O)(4)]Cl·2EtOH·0.5H(2)O 7 forms a structure containing discrete cations that are linked into sheets through hydrogen bonds, whereas the lanthanum complex [La(dmppd)(3)(H(2)O)]·2H(2)O 8 adopts a one-dimensional network structure, connected into sheets by hydrogen bonds. The iron complexes 1 and 2 act as metalloligands in reactions with silver(I) salts, with the nature of the product depending on the counter-ions present. Thus, the reaction between 1 and AgBF(4) gave [AgFe(dppd)(3)]BF(4)·DMSO 9, in which the silver centres link the metalloligands into discrete nanotubes, whereas reactions with AgPF(6) and AgSbF(6) gave [AgFe(dppd)(3)]PF(6)·3.28DMSO 10 and [AgFe(dppd)(3)]SbF(6)·1.25DMSO 11, in which the metalloligands are linked into sheets. In all three cases, only four of the six pyridyl groups present on the metalloligands are coordinated. The reaction between 2 and AgNO(3) gave [Ag(2)Fe(dmppd)(3)(ONO(2))]NO(3)·MeCN·CH(2)Cl(2)12. Compound 12 adopts a layer structure in which all pyridyl groups are coordinated to silver centres and, in addition, a nitrate ion bridges between two silver centres. A similar structure is adopted by [Ag(2)Fe(dmppd)(3)(O(2)CCF(3))]CF(3)CO(2)·2MeCN·0.25CH(2)Cl(2)13, with a bridging trifluoroacetate ion playing the same role as the nitrate ion in 12.

A chemosensor for dihydrogenphosphate based on an oxoazamacrocycle possessing three thiourea arms

We report a new H-bond macrocyclic chromogenic chemosensor in organic media, H(3)L, which displayed drastic changes in its UV-vis spectra revealing selectivity for dihydrogenphosphate over other inorganic anions, such as acetate or fluoride. The X-ray crystal structures of the [H(4)L···NO(3)]·(CH(3)CN)(4) and [H(4)L···CF(3)CO(2)]·(CH(3)CN)(2) salt complexes are also reported.

Mechanochemical reactions of coordination polymers by grinding with KBr

Grinding of a one-dimensional (1-D) ladder coordination polymer (CP), [Zn(μ-CH(3)CO(2))(CF(3)CO(2))bpe] (1), and a hydrogen-bonded 1-D CP, [Cd(CH(3)CO(2))(2)bpe(H(2)O)] (2), with KBr resulted in the exchange of carboxylate by bromide ions and the formation of 1-D zigzag and 2-D CPs respectively.

The effect of the axial ligand on distinct reaction tunneling for methane hydroxylation by nonheme iron(iv)–oxo complexes

Comprehensive density functional theory computations on substrate hydroxylation by a range of nonheme iron(IV)-oxo model systems [Fe(IV)(O)(NH(3))(4)L](+) (where L = CF(3)CO(2)(-), F(-), Cl(-), N(3)(-), NCS(-), NC(-), OH(-)) have been investigated to establish the effects of axial ligands with different degrees of electron donor ability on the reactivity of the distinct reaction channels. The results show that the electron-pushing capability of the axial ligand can exert a considerable influence on the different reaction channels. The σ-pathway reactivity decreases as the electron-donating ability of the axial ligand strengthens, while the π-pathway reactivity follows an opposite trend. Moreover, the apparently antielectrophilic trend observed for the energy gap between the triplet π- and quintet σ-channel (ΔG(T-Q)) stems from the fact that the reaction reactivity can be fine-controlled by the interplay between the exchange-stabilization benefiting from the (5)TS(H) relative to the (3)TS(H) by most nonheme enzymes and the destabilization effect of the orbital by the anionic axial ligand. When the former counteracts the latter, the quintet σ-pathway will be more effective than the other alternatives. Nevertheless, when the dramatic destabilization effect of the orbital by a strong binding axial σ-donor ligand like OH(-) counteracts but does not override the exchange-stabilization, the barrier in the quintet σ-pathway will remain identical to the triplet π-pathway barrier. Indeed, the axial ligand does not change the intrinsic reaction mechanism in its respective pathway; however, it can affect the energy barriers of different reaction channels for C-H activation. As such, the tuning of the reactivity of the different reaction channels can be realised by increasing/decreasing the electron pushing ability.

Role of Anions in the Synthesis of Cyclobutane Derivatives via [2 + 2] Cycloaddition Reaction in the Solid State and Their Isomerization in Solution

trans-3-(4'-Pyridyl)acrylic acid (4-PA) is inert to photodimerization reaction both in solution and solid state. It is made photoreactive by forming salts with various acids. The anions of these salts play a key role in directing the packing of 4-PAH(+) in the solid state. The anions CF(3)CO(2)(-), Cl(-), ClO(4)(-), and BF(4)(-) direct the parallel alignments of 4-PAH(+) in head-to-tail (HT) fashion and lead to the formation of HT-photodimer. On the other hand, bivalent anion SO(4)(2-) directs parallel alignment of 4-PAH(+) in head-to-head (HH) fashion and lead to the formation of HH-photodimer. The details of the anion-controlled stereoselective syntheses of these two cyclobutane derivatives are presented. Interestingly, both cyclobutane compounds undergo isomerization from rctt-form to rctc-form in solution catalyzed by acid.

Regioselective Orthopalladation of (Z)-2-Aryl-4-Arylidene-5(4H)-Oxazolones: Scope, Kinetico-Mechanistic, and Density Functional Theory Studies of the C–H Bond Activation

Orthopalladated complexes derived from (Z)-2-aryl-4-arylidene-5(4H)-oxazolones have been prepared by reaction of the oxazolone with palladium acetate in acidic medium. The reaction is regioselective, only the ortho C-H bond of the arylidene ring being activated, producing a six-membered ring. The scope and reaction conditions of the orthopalladation are dependent on the acidity of the solvent. In CF(3)CO(2)H a large number of oxazolones can be metalated under mild conditions. As acidity decreases a lesser number of oxazolones can be efficiently palladated and harsher conditions must be used to achieve similar yields. The C-H bond activation in acidic medium agrees with an ambiphilic mechanism, as determined from kinetic measurements at variable temperature and pressure for different oxazolones substituted at the arylidene ring. The mechanism has been confirmed by density functional theory (DFT) calculations, where the formation of the six-membered ring is shown to be favored from both a kinetic and a thermodynamic perspective. In addition, the dependence of the reaction rate on the acidity of the medium has also been accounted for via a fine-tuning between the C-H agostic precoordination and the proton abstraction reaction in the overall process occurring on coordinatively saturated [Pd(κ(N)-oxazolone)(RCO(2)H)(3)](2+).

Formation of Carbon–Sulfur and Carbon–Selenium Bonds by Palladium-Catalyzed Decarboxylative Cross-Couplings of Hindered 2,6-Dialkoxybenzoic Acids

A simple route to diaryl sulfides using a decarboxylative palladium-catalyzed reaction between electron-rich 2,6-dialkoxybenzoic acid derivatives and diaryl disulfides is reported. This coupling proceeds efficiently in the presence of Pd(CF(3)CO(2))(2) and Ag(2)CO(3) in a 65:1 mixture of 1,4-dioxane and tetramethylene sulfoxide (TMSO). We present also the first formation of a carbon-selenium bond via a palladium-catalyzed decarboxylative cross-coupling.

Tunability of the MIIMIII/MII2 and MIII2/MIIMIII (M = Mn, Co) couples in bis-μ-O,O′-carboxylato-μ-OR bridged complexes

A comparison of the electrochemical properties of a series of dinuclear complexes [M(2)(L)(RCO(2))(2)](+) with M = Mn or Co, L = 2,6-bis(N,N-bis-(2-pyridylmethyl)-sulfonamido)-4-methylphenolato (bpsmp(-)) or 2,6-bis(N,N-bis(2-pyridylmethyl)aminomethyl)-4-tert-butylphenolato (bpbp(-)) and R = H, CH(3), CF(3) or 3,4-dimethoxybenzoate demonstrates: (i) The electron-withdrawing sulfonyl groups in the backbone of bpsmp(-) stabilize the [M(2)(bpsmp)(RCO(2))(2)](+) complexes in their M(II)(2) oxidation state compared to their [M(2)(bpbp)(RCO(2))(2)](+) analogues. Manganese complexes are stabilised by approximately 550 mV and cobalt complexes by 650 mV. (ii) The auxiliary bridging carboxylato ligands further attenuate the metal-based redox chemistry. Substitution of two acetato for two trifluoroacetato ligands shifts redox couples by 300-400 mV. Within the working potential window, reversible or quasi-reversible M(II)M(III)↔ M(II)(2) processes range from 0.31 to 1.41 V for the [Co(2)(L)(RCO(2))(2)](+/2+) complexes and from 0.54 to 1.41 V for the [Mn(2)(L)(RCO(2))(2)](+/2+) complexes versus Ag/AgCl for E(M(II)M(III)/M(II)(2)). The extreme limits are defined by the complexes [M(2)(bpbp)(CH(3)CO(2))(2)](+) and [M(2)(bpsmp)(CF(3)CO(2))(2)](+) for both metal ions. Thus, tuning the ligand field in these dinuclear complexes makes possible a range of around 0.9 V and 1.49 V for the one-electron E(M(II)M(III)/M(II)(2)) couple of the Mn and Co complexes, respectively. The second one-electron process, M(II)M(III)↔ M(III)(2) was also observed in some cases. The lowest potential recorded for the E°(M(III)(2)/M(II)M(III)) couple was 0.63 V for [Co(2)(bpbp)(CH(3)CO(2))(2)](2+) and the highest measurable potential was 2.23 V versus Ag/AgCl for [Co(2)(bpsmp)(CF(3)CO(2))(2)](2+).

Variable coordination of amine functionalised N-heterocyclic carbene ligands to Ru, Rh and Ir: C–H and N–H activation and catalytic transfer hydrogenation

Chelating amine and amido complexes of late transition metals are highly valuable bifunctional catalysts in organic synthesis, but complexes of bidentate amine-NHC and amido-NHC ligands are scarce. Hence, we report the reactions of a secondary-amine functionalised imidazolium salt 2a and a primary-amine functionalised imidazolium salt 2b with [(p-cymene)RuCl(2)](2) and [Cp*MCl(2)](2) (M = Rh, Ir). Treating 2a with [Cp*MCl(2)](2) and NaOAc gave the cyclometallated compounds Cp*M(C,C)I (M = Rh, 3; M = Ir, 4), resulting from aromatic C-H activation. In contrast, treating 2b with [(p-cymene)RuCl(2)](2), Ag(2)O and KI gave the amine-NHC complex [(p-cymene)Ru(C,NH(2))I]I (5). The reaction of 2b with [Cp*MCl(2)](2) (M = Rh, Ir), NaO(t)Bu and KI gave the amine-NHC complex [Cp*Rh(NH(2))I]I (6) or the amido-NHC complex Cp*Ir(C,NH)I (7); both protonation states of the Ir complex could be accessed: treating 7 with trifluoroacetic acid gave the amine-NHC complex [Cp*Ir(C,NH(2))I][CF(3)CO(2)] (8). These are the first primary amine- or amido-NHC complexes of Rh and Ir. Solid-state structures of the complexes 3-8 have been determined by single crystal X-ray diffraction. Complexes 5, 6 and 7 are pre-catalysts for the catalytic transfer hydrogenation of acetophenone to 1-phenylethanol, with ruthenium complex 5 demonstrating especially high reactivity.

(1S,2R,4S)-1-[(Benzylamino)methyl]-4-(prop-1-en-2-yl)cyclohexane-1,2-diol

The title compound, C17H25NO2, was synthesized by epoxidation of the double bond of (S)-perillyl alcohol [(S)-4-isopropenyl-1-cyclo­hexenyl­methanol], followed by the oxirane ring-opening by benzyl­amine using [Ca(CF3CO2)2] as catalyst under solvent-free condition at 313 K. The mol­ecular conformation is stabilized by an intra­molecular O—H⋯N hydrogen bond. In the crystal, mol­ecules are linked by inter­molecular N—H⋯O hydrogen bonds, forming chains parallel to the a axis, which are further connected by O—H⋯O hydrogen bonds into sheets parallel to (010). The absolute configuration of the mol­ecule is known from the synthetic procedure.

Cleavable biotin probes for labeling of biomolecules via azide-alkyne cycloaddition.

The azide-alkyne cycloaddition provides a powerful tool for bio-orthogonal labeling of proteins, nucleic acids, glycans, and lipids. In some labeling experiments, e.g., in proteomic studies involving affinity purification and mass spectrometry, it is convenient to use cleavable probes that allow release of labeled biomolecules under mild conditions. Five cleavable biotin probes are described for use in labeling of proteins and other biomolecules via azide-alkyne cycloaddition. Subsequent to conjugation with metabolically labeled protein, these probes are subject to cleavage with either 50 mM Na(2)S(2)O(4), 2% HOCH(2)CH(2)SH, 10% HCO(2)H, 95% CF(3)CO(2)H, or irradiation at 365 nm. Most strikingly, a probe constructed around a dialkoxydiphenylsilane (DADPS) linker was found to be cleaved efficiently when treated with 10% HCO(2)H for 0.5 h. A model green fluorescent protein was used to demonstrate that the DADPS probe undergoes highly selective conjugation and leaves a small (143 Da) mass tag on the labeled protein after cleavage. These features make the DADPS probe especially attractive for use in biomolecular labeling and proteomic studies.