Center Of Reaction Research Articles

Promoting Pharmacovigilance: A Review on Significance and Imperative for Establishing Regional Reporting Centres for Adverse Drug Reactions (Adrs)

Promoting Pharmacovigilance: A Review on Significance and Imperative for Establishing Regional Reporting Centres for Adverse Drug Reactions (Adrs)

Increasing catalytic efficiency of cobalt centers in oxygen reduction reaction - Evidence from cobalt with salen ligands polymer complex

Substantial research is performed for cobalt-based catalysts for various applications in catalysis, including oxygen reduction reaction (ORR) catalysis in nonaqueous electrolytes. Cobalt exhibits high catalytic activity due to partially filled d-orbitals, which promote the formation of chemisorption bonds with various molecules. The catalytic activity of metal centers can be influenced both by changing their immediate environment and by varying the reaction conditions. This paper investigates the influence of solvent type, electrolyte concentration, and organic framework conductivity on the efficiency of ORR catalysis in non-aqueous electrolytes as illustrated by poly-CoSal polymer complex. The findings show that the increase in the solvent donor number of and conductivity of the organic backbone leads to highly efficient cobalt catalysts, which can be potentially be applied in oxygen cathodes of Li-O2 batteries. CoSal-based catalysts increase the discharge voltage of Li-O2 cells and can operate in dry atmospheric air.

CoAl composite catalysts derived from hydrotalcite-like compounds for CH4 efficient dry reforming

In this study, CoAlx-LDH hydrotalcite-like was used as the precursors to prepare the CoAlx-LD composite catalysts for the DRM reaction. The transition metal Co was the main catalytic active centers for the DRM reaction. The layered structure of the hydrotalcite-like CoAlx-LDH precursors promoted the highly dispersed Co0 active centers to be formed in the CoAlx-LD catalysts. In addition, synergistic effects between active sites, basic sites and oxygen vacancies can promote the DRM catalytic performances of CoAl composite catalysts. Meanwhile, the Co/Al mole ratio can regulate the active sites, basic sites and oxygen vacancies in the catalysts, thereby affecting its catalytic performances. The CoAl12-LD catalyst with a Co/Al mole ratio of 1/2 exhibited excellent DRM catalytic performances. The CH4 and CO2 conversions on the prepared CoAl12-LD catalyst achieved 86.8% and 53.4% at atmospheric pressure and 700 °C, respectively. In addition, the catalyst also showed excellent use stability in the DRM reaction.

In-situ noncovalent interaction of ammonium ion enabled C–H bond functionalization of polyethylene glycols

The noncovalent interactions of ammonium ion with multidentate oxygen-based host has never been reported as a reacting center in catalytic reactions. In this work, we report a reactivity enhancement process enabled by non-covalent interaction of ammonium ion, achieving the C–H functionalization of polyethylene glycols with acrylates by utilizing photoinduced co-catalysis of iridium and quinuclidine. A broad scope of alkenes can be tolerated without observing significant degradation. Moreover, this cyano-free condition respectively allows the incorporation of bioactive molecules and the PEGylation of dithiothreitol-treated bovine serum albumin, showing great potentials in drug delivery and protein modification. DFT calculations disclose that the formed α-carbon radical adjacent to oxygen-atom is reduced directly by iridium before acrylate addition. And preliminary mechanistic experiments reveal that the noncovalent interaction of PEG chain with the formed quinuclidinium species plays a unique role as a catalytic site by facilitating the proton transfer and ultimately enabling the transformation efficiently.

Electrocatalytic hydrogenation of acetonitrile to ethylamine in acid

Electrochemical hydrogenation of acetonitrile based on well-developed proton exchange membrane electrolyzers holds great promise for practical production of ethylamine. However, the local acidic condition of proton exchange membrane results in severe competitive proton reduction reaction and poor selection toward acetonitrile hydrogenation. Herein, we conduct a systematic study to screen various metallic catalysts and discover Pd/C exhibits a 43.8% ethylamine Faradaic efficiency at the current density of 200 mA cm−2 with a specific production rate of 2912.5 mmol g−1 h−1, which is about an order of magnitude higher than the other screened metal catalysts. Operando characterizations indicate the in-situ formed PdHx is the active centers for catalytic reaction and the adsorption strength of the *MeCH2NH2 intermediate dictates the catalytic selectivity. More importantly, the theoretical analysis reveals a classic d-band mediated volcano curve to describe the relation between the electronic structures of catalysts and activity, which could provide valuable insights for designing more effective catalysts for electrochemical hydrogenation reactions and beyond.

IZCp and PZCp: Redox Non-innocent Cyclopentadienyl Ligands as Electron Reservoirs for Sandwich Complexes.

A long-sustained effort of systematic steric and electronic modification of cyclopentadienyl (Cp) ligands has enabled them to find wide-ranging, valuable applications. Herein, we present two novel Cp ligands: imidazolium- and pyrrolinium-substituted zwitterionic Cps (IZCp and PZCp), whose key utility is redox non-innocence─the ability to participate cooperatively with the metal center in redox reactions. Through the simple metalation of ZCps, the Cr(0) and Mo(0) half-sandwich complexes (IZCp)Cr(CO)3, (PZCp)Cr(CO)3, (IZCp)Mo(CO)3, and (PZCp)Mo(CO)3, respectively, as well as the Ru(II) sandwich complexes [(IZCp)RuCp]PF6 and [(PZCp)RuCp]PF6 were prepared. The sandwich complexes were fully characterized and showed by cyclic voltammetry reversible one-electron reduction at E1/2 potentials ranging from -1.7 to -2.7 V vs Fc/Fc+. These values are unusually low and have not been observed with other Cp ligands due to the instability of the reduced complexes. Density functional theory (DFT) calculations for the reduced sandwich derivatives with IZCp and PZCp showed their spin densities to be highly delocalized over their ZCp ligand moieties (70-90%). Electron paramagnetic resonance (EPR) analysis of the isolated K[(PZCp)Mo(CO)3] and (PZCp)RuCp also indicated a high degree of ligand-localized radical character. Thus, the IZCp and PZCp ligands act as electron reservoirs to sustain these sandwich complexes in highly reduced states. At the same time, the CO stretching frequencies of K[(PZCp)Mo(CO)3]: νCO 1871, 1748, and 1699 cm-1, rank the [PZCp]- ligand as the strongest electron-donating Cp ligand among the reported CpMo(CO)3 derivatives, whose νCO > 1746 cm-1. In addition, these redox non-innocent Cps were obtained in high yields and found to be practically air- and moisture-stable, unlike typical Cps.

Core-Shell MnFe Nanocatalyst Derived from Prussian Blue Analogs for Peroxymonosulfate Activation: Nonradical Mechanism and Bimetallic Valence Cycle.

Sulfamethazine (SAT) is widely present in sediment, soil, rivers, and groundwater. Unfortunately, traditional water treatment technologies are inefficient at eliminating SAT from contaminated water. Therefore, developing an effective and ecologically friendly treatment procedure to effectively remove SAT is critical. This has raised concerns about its potential impact on the environment and human health. In this study, metal-organic-inorganic composites consisting of graphene-encapsulated Fe-Mn metal catalyst (Mn3Fe1-NC) were synthesized by calcining MnFe Prussian blue analogs (PBA) under a nitrogen atmosphere. The composites were applied to activate peroxymonosulfate (PMS) and facilitate the degradation of SAT in aquatic environments. The Mn3Fe1-NC, dosed with 5 mg, in combination with PMS, dosed with 1.5 mmol L-1, achieved a 91.8% degradation efficiency of SAT. The transformation of the CN skeleton led to the formation of a carbon shell structure, which consequently reduced metal ion leaching from the material. At various pH levels, the iron and manganese ions were observed to leach out at levels lower than 0.1392 and 0.0580 mg L-1, respectively. In contrast, the Mn3Fe1-NC was found to be minimally impacted by pH levels and coexisting ions present in the aqueous environment. Radical burst experiments and electrochemical analysis tests verified that degradation primarily occurs through the nonradical pathway of electron transfer. The active sites responsible for this process were identified as the Mn (IV) and graphitic-N atoms on the material, which facilitate direct electron transfer. Additionally, the presence of Fe atoms promotes the valence cycling of Mn atoms. This study introduces new insights into the reaction mechanism and the constitutive relationship of catalytic centers in nonradical oxidation reactions.

Advancements of MOFs in the Field of Propane Oxidative Dehydrogenation for Propylene Production.

Compared to the currently widely used propane dehydrogenation process for propylene production, propane oxidative dehydrogenation (ODHP) offers the advantage of no thermodynamic limitations and lower energy consumption. However, a major challenge in ODHP is the occurrence of undesired over-oxidation reactions of propylene, which reduce selectivity and hinder industrialization. MOFs possess a large number of metal sites that can serve as catalytic centers, which facilitates the easier access of reactants to the catalytic centers for reaction. Additionally, their flexible framework structure allows for easier adjustment of their pores compared to metal oxides and molecular sieves, which is advantageous for the diffusion of products within the framework. This property reduces the likelihood of prolonged contact between the generated propylene and the catalytic centers, thus minimizing the possibility of over-oxidation. The research on MOF catalyzed oxidative dehydrogenation of propane (ODHP) mainly focuses on the catalytic properties of MOFs with cobalt oxygen sites and boron oxygen sites. The advantages of cobalt oxygen site MOFs include significantly reduced energy consumption, enabling catalytic reactions at temperatures of 230 °C and below, while boron oxygen site MOFs exhibit high conversion rates and selectivity, albeit requiring higher temperatures. The explicit structure of MOFs facilitates the mechanistic study of these sites, enabling further optimization of catalysts. This paper provides an overview of the recent progress in utilizing MOFs as catalysts for ODHP and explores how they promote progress in ODHP catalysis. Finally, the challenges and future prospects of MOFs in the field of ODHP reactions are discussed.

The Effect of Water Co-Feeding on the Catalytic Performance of Zn/HZSM-5 in Ethylene Aromatization Reactions.

During the methanol-to-aromatics (MTA) process, a large amount of water is generated, while the influence and mechanism of water on the activity and selectivity of the light olefin aromatization reaction are still unclear. Therefore, a study was conducted to systematically investigate the effects of water on the reactivity and the product distribution in ethylene aromatization using infrared spectroscopy (IR), intelligent gravitation analyzer (IGA), and X-ray absorption fine structure (XAFS) characterizations. The results demonstrated that the presence of water reduced ethylene conversion and aromatic selectivity while increasing hydrogen selectivity at the same contact time. This indicated that water had an effect on the reaction pathway by promoting the dehydrogenation reaction and suppressing the hydrogen transfer reaction. A detailed analysis using linear combination fitting (LCF) of Zn K-edge X-ray absorption near-edge spectroscopy (XANES) on Zn/HZSM-5 catalysts showed significant variations in the state of existence and the distribution of Zn species on the deactivated catalysts, depending on different reaction atmospheres and water contents. The presence of water strongly hindered the conversion of ZnOH+ species, which served as the active centers for the dehydrogenation reaction, to ZnO on the catalyst. As a result, the dehydrogenation activity remained high in the presence of water. This study using IR and IGA techniques revealed that water on the Zn/HZSM-5 catalyst inhibited the adsorption of ethylene on the zeolite, resulting in a noticeable decrease in ethylene conversion and a decrease in aromatic selectivity. These findings contribute to a deeper understanding of the aromatization reaction process and provide data support for the design of efficient aromatization catalysts.

Boosting selective hydrogenation of α,β-unsaturated aldehydes through constructing independent Pt and Fe active sites on support

The alloy catalysts usually exhibited excellent catalytic synergy owing to the electronic and ensemble effect. However, the process of alloying makes the displacement of the d-band center from the Fermi level, decreasing the adsorption strength of reactant molecules. Herein, we constructed the spatial separation catalyst in which the independent Pt and FeOx nanoparticles were uniformly distributed on SBA-15 support (denoted as Pt = Fe/SBA-15), which exhibits remarkable efficiency in the hydrogenation of α,β-unsaturated aldehydes, i.e. with a 4 fold higher than the corresponding alloy catalyst in reaction rate, and a 4 fold increase in selectivity for cinnamalcohol production compared to the single Pt catalyst. It is found that Pt primarily catalyzes the H2 dissociative adsorption into H*, while FeOx mainly catalyzes the reaction between H* and aldehydes, forming alcohols. Assuming that the rate-determining-step is the H-spillover from Pt to Fe, the two cascade reactions are interconnected. To confirm this mechanism, we employ a physical mixture catalyst of Pt/SBA-15 and FeOx/SBA-15, where its catalytic activity lies between Pt = Fe/SBA-15 and alloy materials. The catalysts’ structures are well characterized by STEM and EDS mapping analysis, and the mechanism is supported by experimental data and DFT calculations. The research we conducted offers a new perspective into the cooperative catalysis, achieved by coupling independent active centers in thermos-hydrogenation reactions.

Fe-doped N/S-rich carbon catalyst derived from porphyrine-ferrocene conjugated microporous polymer for bifunctional electrocatalysis and zinc-air batteries

Facile fabrication of non-noble electrocatalysis with precisely tunned active centers for oxygen reduction reaction (ORR) and zinc–air batteries (ZABs) are intriguing yet still challenging. Herein, an iron porphyrin-ferrocene conjugated microporous polymer (FeCMP) with isolated Fe centers was used as precursor to fabricate Fe-Nx electrocatalyst. Innovatively, NaSCN as both an active site protectant and a heteroatomic dopant was introduced. Subsequent carbonization at 800℃ for FeCMP mixed with NaSCN resulted in the formation of highly isolated Fe with S- and N-doped porous carbon (FeSNC800), which acts as a bifunctional catalyst with good ORR (E1/2 = 0.88 V) and OER (oxygen evolution reaction, η10 = 0.34 V) performance. The assembled Zinc-air battery possesses 118 mW cm−2 of power density and is stable over 300 cycles. This work highlights the strength of rational designed polymer precursor and heteroatom doping in controlled pyrolysis of platinum group-free electrocatalysts.

Synergistic effects between Mn and Co species in CO2 hydrogenation over xCo/MnO catalysts

CO2 hydrogenation technology has great potential for mitigating the greenhouse effect and creating a green economy. The development of catalysts plays a key role in the progress of CO2 hydrogenation technology. In this study, the xCo/MnO catalysts for CO2 hydrogenation reaction were prepared by the impregnation method using MnOx as the catalyst support. And the effects of the Co loading on the CO2 hydrogenation performances of the prepared xCo/MnO catalysts were investigated. The active Co0 species on the xCo/MnO catalysts surface are the main active centers for the CO2 hydrogenation reaction, and the medium basic sites on the xCo/MnO catalysts are the main CO2 adsorption sites. The MnOx support possesses a large number of medium basic sites, which can enhance the CO2 molecules adsorption ability of the xCo/MnO catalysts. An effective regulation of the basic and hydrogenation active site numbers on the xCo/MnO catalysts surface can be achieved by changing the Co loading amount, which in turn can affect the CO2 molecules adsorption, activation and hydrogenation abilities of the xCo/MnO catalysts. Moreover, the Mn1-yCoyO solid solution was found to be formed in the prepared xCo/MnO catalysts, which is conducive to the dispersion of metal Co nanoparticles on the MnO surface and the generation of oxygen-deficient sites. The CO2 desorption amount on the 12Co/MnO catalyst reached 1.76 mmol/g, which provided the catalyst with strong CO2 adsorption and activation abilities, enabling it to exhibit great CO2 hydrogenation performance. Under the conditions of atmosphere and 420 °C, the CO2 conversion and CH4 selectivity on the prepared 12Co/MnO catalyst reached 57.5 % and 78.8 %, separately. Furthermore, the CO2 conversion was able to consistently remain at the initial 57.5 %, and the CH4 selectivity was maintained above 70.0 % in the 10 times CO2 hydrogenation cycle tests on the 12Co/MnO catalyst. Our study highlights the potential of using MnOx as catalyst support in the CO2 hydrogenation reaction, and the findings will provide convenient for the future studies.

Nano‐Au‐decorated hierarchical porous cobalt sulfide derived from ZIF‐67 toward optimized oxygen evolution catalysis: Important roles of microstructures and electronic modulation

AbstractEnhancing both the number of active sites available and the intrinsic activity of Co‐based electrocatalysts simultaneously is a desirable goal. Herein, a ZIF‐67‐derived hierarchical porous cobalt sulfide decorated by Au nanoparticles (NPs) (denoted as HP‐Au@CoxSy@ZIF‐67) hybrid is synthesized by low‐temperature sulfuration treatment. The well‐defined macroporous–mesoporous–microporous structure is obtained based on the combination of polystyrene spheres, as‐formed CoxSy nanosheets, and ZIF‐67 frameworks. This novel three‐dimensional hierarchical structure significantly enlarges the three‐phase interfaces, accelerating the mass transfer and exposing the active centers for oxygen evolution reaction. The electronic structure of Co is modulated by Au through charge transfer, and a series of experiments, together with theoretical analysis, is performed to ascertain the electronic modulation of Co by Au. Meanwhile, HP‐Au@CoxSy@ZIF‐67 catalysts with different amounts of Au were synthesized, wherein Au and NaBH4 reductant result in an interesting “competition effect” to regulate the relative ratio of Co2+/Co3+, and moderate Au assists the electrochemical performance to reach the highest value. Consequently, the optimized HP‐Au@CoxSy@ZIF‐67 exhibits a low overpotential of 340 mV at 10 mA cm–2 and a Tafel slope of 42 mV dec–1 for OER in 0.1 M aqueous KOH, enabling efficient water splitting and Zn–air battery performance. The work here highlights the pivotal roles of both microstructural and electronic modulation in enhancing electrocatalytic activity and presents a feasible strategy for designing and optimizing advanced electrocatalysts.

High-area alumina supported Cu-Ce atomic species for water-gas shift reaction.

Atomically dispersed cerium species, anchored to high-area alumina by unsaturated penta-coordinated aluminum, strongly interact with atomically dispersed Cu species to provide active centers for water-gas shift reaction (WGSR). The alumina-anchored Ce3+ species stabilize atomically dispersed Cu+ to form Cu+-Ce3+ active complexes and they work synergistically to enhance low-temperature WGSR activity. This work offers alternative approaches to developing low-cost catalysts for the WGSR process.

Reaction rate constant: a theoretical description from local temperature.

Application of various descriptors based on electron density and its associated quantities to quantify chemical reactivity within the conceptual density functional theory has recently come into spotlight. Among others and particularly relevant to our study, local temperature based on electron density as well as kinetic energy density, as a measure of the kinetic energy of an electron moving in the Kohn-Sham potential of systems, should be mentioned. In this work, we propose to use the local temperature for describing the reaction rate constant, where our main idea originates from the point that the smaller the local temperature at the reaction center, the easier the electron removal, leading to a larger rate constant. On the basis of theoretical considerations, it is proved that the rate constant variations caused by the substituent effects can well be proportional to the local temperature at the reaction center. In order to numerically validate our proposed approach, we have taken the phenol derivatives with the available experimental rate constants of their O-methylation reaction as working models. The reason for this choice is that one of the most versatile approaches for labeling biologically active compounds with the 11C nuclide for positron emission tomography (PET) is methylation by methyl iodide including 11C nuclide, [11C]MeI, where methylation of phenolic oxygen with [11C]MeI is utilized to label some important tracers for PET studies. Our results unveil that the local temperature changes at the reaction center of the aforementioned reaction are reasonably correlated with the rate constant variations. Hopefully, incorporating the proposed correlations between the local temperature and the kinetics data into a computer control algorithm not only provides a simple tool for predicting the rate constant of the O-methylation reaction for other substituted phenols, but also, as a part of the chemical artificial intelligence, the optimum [11C]MeI labeling conditions for a wide variety of phenol derivatives can be controlled.

Oxazaborolidinones: Steric Coverage Effect of Lewis Acidic Boron Center in Suzuki-Miyaura Coupling Reactions.

It was demonstrated that α-hydroxycarboxamide is an excellent boron-protecting group. The reaction between α-hydroxycarboxamide and organoboronic acids produced stable oxazaborolidinones (OxBs), in which the -hybridized boron atom was sterically protected by α-hydroxycarboxamide. The alkyl groups of the α-hydroxycarboxamide moiety can dynamically cover the p-orbital of the -hybridized boron center, creating a small space around the boron atom, allowing for smooth transmetalation by a Pd catalyst and easy deprotection by water. This protecting phenomenon is effective for readily purification, Suzuki-Miyaura coupling reactions with unstable boronic acids and iterative cross-couplings.

Synergistic Optimization of Morphology and Vacancies on Diatomic Rhodium Catalysts Dispersed on Carbon Nitride for Efficient Photocatalytic Reduction of CO2

AbstractDiatomic site catalysts (DAC) have better performance with higher metal content and more flexible active sites compared with single atomic site catalysts (SAC). Herein, the authors for the first time achieved Rh2 DAC on loose porous g‐C3N4 hollow nanospheres with N‐vacancies and applied to photocatalytic CO2 reduction reaction, overcoming the current limitations of the low electron–hole recombination rate and prolong the lifetime of the photogenerated carrier. The high specific surface area of hollow nanosphere facilitates the uniform dispersion and anchoring of Rh2 diatomic pairs, while the N‐vacancies induce a stable 3N/Rh‐Rh/1N2C coordination between the carrier and Rh2 diatomic pairs. The local charges on the support framework with N vacancies tend to be transferred to Rh2 diatomic site by 3N/Rh‐Rh/1N2C bridge, which made the charge enriched Rh2 diatomic site become the active center of reaction, enhance charge separation efficiency of Rh2/HCNS‐Nv. Compared with Rh1 SAC, further Density Functional Theory (DFT) calculation confirms that Rh2 DAC can effectively stabilize rate‐limiting intermediates CHO*, and well weaken the C─O bond strength in CH3O* species, promote the generation and separation of CH4, resulting in high CO2 reduction efficiency and CH4 electron selectivity of up to 91.65%.

Fe/sponge structure peanut shell carbon composite preparation for efficient Fenton oxidation crystal violet.

In order to obtain super synergy effect between adsorption and Fenton oxidation for crystal violet (CV) removement from water, in this study, Fe modified on a sponge structure peanut shell carbon (Fe/SPSC) nanocomposite was successfully synthesized by a wet impregnation method. In the Fe/SPSC sample, the prepared peanut shell carbon had a sponge-like structure, (002) crystal plane of graphite crystallite, and Fe/SPSC composite coexisted Fe2O3 and Fe3O4 crystalline, which could adsorb and enrich crystal violet molecule, decrease the concentration of CV solution rapidly. And also SPSC could do better for electrons transfer and further promote CV oxidation degradation. The removal efficiency results showed that the 7% Fe/SPSC (500°C, 2h) had the best CV removal activity. The composite prepared under the optimum conditions is 2.0g/L, 0.1mL 30% H2O2, pH = 7.0, 300mg/L crystal violet water solution, and the CV degradation rate can reach 95.5%, and the CV degradation amount for Fe/SPSC was 143.25mg/g. It was confirmed that hydroxyl radicals (•OH) is the active center of Fenton oxidation degradation reaction. XPS results showed that Fe, O, and C elements coexist in the 7% Fe/SPSC composite, and N element content increases after the reaction. Remarkable synergies between adsorption and Fenton oxidation, which could make Fe/SPSC, have quick CV abatement ability. The possible systematic effect mechanism of adsorption and Fenton-oxidation CV was also supplied. The present system has advantages on high CV dye degradation performance, no other Fe sludge formation, short reaction time, and better catalyst reusability.

Enhanced photocatalytic hydrogen production of S-scheme TiO2/g-C3N4 heterojunction loaded with single-atom Ni

S-scheme heterostructure photocatalysts can achieve highly efficient solar energy utilization. Here, single-atom Ni species were deposited onto TiO2/g-C3N4 (TCN) composite photocatalyst with an S-scheme heterojunction for highly efficient photocatalytic water splitting to produce hydrogen. Under solar irradiation, it realized the hydrogen production activity of 134 µmol g–1 h–1, about 5 times higher than the TCN without atomic Ni. In-situ Kelvin probe force microscopy characterization and the density functional calculation certify that by forming the S-scheme heterojunction, the photo-excited electrons from the TiO2 combine with the photogenerated holes at the coupled g-C3N4 driven by a built-in electric field. More importantly, the single-atom Ni species stabilized the photogenerated electrons from the g-C3N4 could effectively enhance the charge separation between the holes on the valence band of TiO2 and electrons at the conduction band of g-C3N4. Meanwhile, the Ni atoms act as the surface catalytic centers for the water reduction reaction, which greatly improves the reactivity of the photocatalyst. The present work provides a new approach for developing noble metal-free heterojunctions for high-efficiency photocatalysis.

Carbon nanotubes as electron mediators for CNTs/CdS/MoS2 high efficient photodegradation of tetracycline under visible light

The ternary nanocomposites of CNTs/CdS/MoS2 was synthesized by a simple two-step hydrothermal method and characterized accordingly. In situ growth of CdS on the surface of CNTs decreased the size of CdS particles and increased its dispersibility. Moreover, CdS took advantage of the good conductivity of CNTs to accelerate the conduction of photogenerated holes and reduced the recombination efficiency of charge carriers. MoS2 grew in situ on the surface of CdS, and the interface between them formed a close contact heterostructure. The built-in electric field formed at the interface between the two forced the photogenerated electrons of CdS and the holes of MoS2 to recombine here. This property not only changed the path of photogenerated electrons and holes, but also made the surface of MoS2 becoming the active center of reduction reaction. The hybrid structure of CNTs/CdS/MoS2 in-situ composite significantly improved the photocatalytic performance. When CNTs/CdS/MoS2 was used as photocatalyst, the degradation rate of tetracycline was 96.7% under 100 min of visible irradiation, and the data was still above 95% after 5 cycles indicate. This indicated that the ternary complex has good photocatalytic performance and stability. The successful preparation of CNTs/CdS/MoS2 provides an economically feasible approach for the degradation of tetracycline.