Orogenic Belt In Central China Research Articles

Geophysical constraints on continental rejuvenation in central China: Implications for outward growth of the Tibetan Plateau

Continental rejuvenation results from the tectonic reactivation of crustal structures and lithospheric reworking by mantle flow. Geochemical observations and field mapping have traditionally provided the primary evidence for the secular evolution of crustal composition and tectonic processes during continental rejuvenation. Nonetheless, the impact of continental rejuvenation on the observed present-day strain rate and orogenic-scale lithospheric structure has not been well constrained. The pre-existing E-W−trending Central China Orogenic Belt has been overprinted by the N-S−trending Central Longitudinal Seismic Belt and constitutes the intracontinental West Qinling Syntaxis in central China, where the tectonic setting changes eastward from contraction to extension. Combining updated global positioning system data and high-resolution crustal seismic tomography, we reveal a modern continental rejuvenation process within the West Qinling Syntaxis in central China. The northward extrusion of the Tibetan Plateau’s weak lithospheric layer (middle-lower crust and lithospheric mantle) of southwestern China relative to the rigid Sichuan Basin/Ordos Block of the eastern West Qinling Syntaxis results in regional dextral shearing that shapes the Central Longitudinal Seismic Belt and defines the eastern Tibetan Plateau margin. The pre-existing E-W−trending Central China Orogenic Belt has been preserved above the brittle-ductile transition zone, and the northward movement of the deep lithospheric layer drives the deformation of the upper crust in the West Qinling Syntaxis. Our results, along with previous studies, suggest the presence of an intracontinental lithospheric interchange structure in central China. The continental rejuvenation of the West Qinling Syntaxis results from a combination of fault reactivation in the upper crust (Stage I, Eocene−Oligocene) and reworking of the deep lithosphere (Stage II, middle−late Miocene) related to the plateau-wide shift in stress accommodation ultimately driven by the redistribution of mass outward from the central Tibetan Plateau. At present, the transition zone between the high- and low-velocity anomalies along the Central Longitudinal Seismic Belt not only shapes the landscape boundary but controls the size and recurrence interval of earthquakes within the West Qinling Syntaxis in central China.

Subduction and retreat of Permian oceanic plates in the East Kunlun Orogenic Belt: evidence from mafic-ultramafic intrusive rocks

ABSTRACT The East Kunlun Orogenic Belt, an important part of the Central Orogenic Belt in China, preserved wealthy geological information for the tectonic evolution of the Proto- and Paleo-Tethys Ocean. Several Permian mafic-ultramafic rocks were identified in the Qimantagh area, EKOB, and zircon U-Pb dating, zircon Hf isotope, geochemistry and whole-rock Sr-Nd isotopes were studied in this paper. The results suggest that the formation age of the Xiyingzhaogou intrusion is 280 ± 4 Ma. The rocks show the characteristics of continental-arc calc-alkaline basalt. The whole-rock εNd(t) value of gabbro in Xiyingzhaogou intrusion is −4.2~-2.6 and the εHf(t) value of zircon is 2.77 ~ 5.82, indicating the characteristics of enriched or weakly depleted mantle; The formation age of Yingzhaogou intrusion is 263 ± 4 Ma. The geochemical characteristics of the Yinzhaogou rocks are consistent with those of continental-arc tholeiite. The whole-rock εNd(t) value of gabbro in Yingzhaogou intrusion is 0.73 ~ 0.92, and the εHf(t) value of zircon is 8.33 ~ 13.50, indicating the characteristics of depleted mantle. We believe that the Xiyingzhaogou intrusion was formed in the Early Permian and originated from the mantle wedge metasomatized by subduction fluid. The Yingzhaogou intrusion was formed in an extensional continental-arc environment caused by the retreat of the subduction plate. Asthenospheric mantle and fluid metasomatic lithospheric mantle were jointly involved in the mantle source. This study confirmed that the subduction of the Paleo-Tethys oceanic slab should had started before the Early Permian and a wide magma arc formed due to flat subduction. The retreat of the subduction plate led to the extension of the East Kunlun region, resulting in the significant enhancement of magmatism in the Middle Permian.

Geochemistry, zircon U–Pb geochronology and Lu–Hf isotopes of the Late Jurassic granitoids from the Shuangyuangou deposit, South Qinling, China: Implications for petrogenesis and porphyry Cu metallogeny

The Shuangyuangou copper deposit is located in the southern segment of the Qinling orogenic belt in central China. The ore‐related intrusions include quartz diorite porphyry, granite porphyry and lamprophyre. In this study, we present whole‐rock geochemistry, zircon U–Pb geochronology, trace elements and Lu–Hf isotope data on the Shuangyuangou intrusions which provide critical constraints on the emplacement age, magma origin, petrogenesis and implications for porphyry Cu mineralization in this newly discovered deposit. Zircon U–Pb dating constrains the emplacement age of quartz diorite porphyry, lamprophyre and granite porphyry at 150–147 Ma. The quartz diorite porphyry and granite porphyry display high‐K calc–alkaline I‐type granite affiliation. The rocks show enrichment of LREE and LILE (Rb, Ba), depletion in HREE and HFSE (Nb, Ta, Ti) and absence of Eu anomaly. Zircon εHf(t) values of quartz diorite porphyry, lamprophyre and granite porphyry range from −7.5 to −1.7 with TDM2 ages of 1.3–1.6 Ga. Our data suggest that the parental magma was derived from partial melting of juvenile lower crust and metasomatic lithospheric mantle, with more involvement of mantle material for the lamprophyre. The zircon Eu/Eu* values of 0.55–0.78 suggest high magmatic water content which suppresses the fractionation of plagioclase. In addition, the ΔFMQ values calculated from zircon trace elements range from −0.90 to 2.96 which is a favourable factor for porphyry Cu mineralization at Shuangyuangou. The Late Jurassic Shuangyuangou intrusion and associated Cu mineralization were formed within an intracontinental setting after the collisional assembly of the Qinling orogenic belt.

A detrital zircon dataset for the eastern Central China Orogenic Belt (East Qinling, Dabie and Sulu orogens)

AbstractThe Qinling‐Dabie‐Sulu orogen is the eastern part of the Central China Orogenic Belt. Looking back on previous studies of the sedimentary record we systematically compiled the dataset of detrital zircon U–Pb ages and Hf isotopes for this orogenic belt. The dataset incorporates a comprehensive compilation of 32,449 detrital zircon U–Pb ages and 979 Hf isotopes. The findings demonstrate that distinct tectonic units within the orogenic belt exhibit unique tectonic evolution histories during various geological epochs. This dataset can be used to constrain the tectonic framework and orogenic evolution including ocean subduction, continental collision and orogen exhumation. It can be integrated with other geological datasets to improve our understanding of the Central Orogenic Belt in China, and possibly plate tectonics globally.

Mo isotopes record recycling of anoxic sediment in a Paleo-oceanic subduction zone

Mafic arc igneous rocks with oceanic crust-derived fluids in their mantle sources generally show heavy Mo isotope compositions. However, these rocks may exhibit variable Mo isotope compositions due to involvement of seafloor sediments under different redox conditions. Thus, it is intriguing how Mo isotope recycles with sediment subduction and how Mo isotope fractionation occurs during this process. Here we report Mo isotope data for Paleozoic mafic arc igneous rocks from the Qinling-Tongbai orogenic belt in Central China. The Qinling mafic rocks have δ98Mo values of −0.03 to 0.40‰, and the Tongbai mafic rocks have δ98Mo values of −0.26 to 0.17‰. These values are considerably higher than the normal mantle values of −0.20 ± 0.01‰. In combination with low Mo/Ce ratios, enriched SrNd isotope compositions, and high melt-mobile incompatible trace element contents for these rocks, the high δ98Mo values suggest that anoxic sediment-derived melts with heavy Mo isotopes were incorporated by oceanic subduction into the mantle sources. The high δ98Mo values of the mafic rocks indicate the limited Mo isotope fractionation during subduction of the anoxic sediment. This inference is further verified by modeling of Mo isotope fractionation under reducing conditions in the subduction zone. In this regard, Mo isotopes can be used to identify the recycling of sediments in different types and thus provide geochemical constraints on the redox conditions of oceanic subduction zones.

Geochronology, Petrogenesis and Tectonic Setting of the Late Jurassic I‐type Granites in the North Qinling Orogenic Belt, Central China

AbstractThe North Qinling Orogenic Belt (NQOB) is a composite orogenic belt in central China. It started evolving during the Meso–Neoproterozoic period and underwent multiple stages of plate subduction and collision before entering intra‐continental orogeny in the Late Triassic. The Meso–Cenozoic intra‐continental orogeny and tectonic evolution had different responses in various terranes of the belt, with the tectonic evolution of the middle part of the belt being particularly controversial. The granites distributed in the Dayu and Kuyu areas in the middle part of the NQOB can provide an important window for revealing the geodynamic mechanisms of the NQOB. The main lithology of Dayu and Kuyu granites is biotite monzogranite, and the zircon U‐Pb dating yielded intrusive ages of 151.3 ± 3.4 Ma and 147.7 ± 1.5 Ma, respectively. The dates suggest that the biotite monzogranite were formed at the end of the Late Jurassic. The whole‐rock geochemistry analysis shows that the granites in the study areas are characterized by slightly high SiO2 (64.50–68.88 wt%) and high Al2O3 (15.12–16.24 wt%) and Na2O (3.55–3.80 wt%) contents. They are also enriched in light rare earth elements, large ion lithophile elements (e.g., Ba, K, La, Pb and Sr), and depleted in high field strength elements (HFSEs) (e.g., Ta, Nb, P and Ti). Additionally, the granites have weakly negative–slightly positive Eu anomalies (δEu = 0.91–1.19). Zircon Lu‐Hf isotopic analysis showed εHf(t) = –6.1—‐3.8, and the two‐stage model age is T2DM(crust) = 1.5–1.6 Ga. The granites in the study areas are analyzed as weak peraluminous high‐K calc‐alkaline I‐type granites. They formed by partial melting of the thickened ancient lower crust, accompanied by the addition of minor mantle‐derived materials. During magma ascent, they experienced fractional crystallization, with residual garnet and amphibole for a certain proportion in the magma source region. Comprehensive the geotectonic data suggest that the end of the Late Jurassic granite magmatism in the Dayu and Kuyu areas represents a compression–extension transition regime. It may have been a response to multiple tectonic mechanisms, such as the late Mesozoic intra‐continental southward subduction of the North China Craton and the remote effect of the Paleo‐Pacific Plate subduction.

Microcontinental block amalgamation in the northern Tibetan Plateau and its significance for understanding the closure of the Proto-Tethyan Ocean

The Qilian-Qaidam Orogenic Belt is a component of the western Central China Orogenic Belt, and records a nearly complete evolutionary history of the South Qilian and North Qaidam oceans (branches of the Proto-Tethyan Ocean). However, the timing and process of amalgamation of the microblocks of the western Central China Orogenic Belt and the closure time of the South Qilian and North Qaidam oceans remain uncertain. The Olongbuluke Terrane (OLT), located in the central of the Qilian-Qaidam Orogenic Belt, contains well-developed Precambrian to Paleozoic sedimentary successions that shed light on the tectonic history of these ocean basins. In this paper, detrital zircon UPb ages combined with ophiolitic, magmatic and high-pressure to ultrahigh-pressure metamorphic records and field investigations, indicate that the OLT was part of a passive continental margin during the early Paleozoic and there was a microblock, named the North Qaidam Terrane (NQT), lying between the Qaidam Block and the OLT. A marked provenance change occurs in the OLT after ca. 517 Ma, which is inferred to record the collision between the OLT and NQT. Later, the North Qaidam oceanic plate subducted under the NQT, and the North Qaidam Ocean closed at ca. 450 Ma. The similar detrital zircon UPb age spectra of contemporaneous deposit flysch sequences in the Shihuigou Formation (OLT) and the Balonggonggaer Formation (the South Qilian Accretionary Belt) indicates the onset of collision between the OLT and Central Qilian Terrane occurred at ca. 458 Ma. The detrital zircon UPb age spectra of microblocks from the early Paleozoic strata of the northern Tibetan Plateau share a North Indian affinity, indicating that the closure of the Proto-Tethyan Ocean may relate to the formation of the Gondwanan landmass.

Discovery of anomalous gallium enriched in stone coal: Significance, provenance and recommendations

Gallium (Ga) is a critical mineral that plays an irreplaceable role in consumer electronics, clean energy technologies and the aerospace industry. Nowadays competition for gallium resources at the national strategic level has begun to emerge, but gallium resources are unevenly distributed globally, and their presence is not guaranteed. New discoveries revealed an average gallium concentration of thirty-one samples from M1, M2, M3 and M4 stone coal-bearing seams of the Cambrian strata on South Qinling Orogenic Belt in central China is 157 mg/kg (9.98–747 mg/kg), which is 27.6-fold higher than the global hard coal average, as well as the existing association of Mo–V–U–Cd–Zn–Ba–Se–Mg–Ni–Cu enrichment. Ga average of these coal seams are 344 mg/kg (M3, 44.5–747 mg/kg, n = 11), 270 mg/kg (M4, 14.3–270 mg/kg, n = 5), 53.8 mg/kg (M2, 22.6–75.4 mg/kg, n = 8) and 19.8 mg/kg (M1, 9.98–34.9 mg/kg, n = 7) respectively, as well as the thickness of approximately 6, 12, 8, and 20 m, which be close to or exceed to the boundary grade standard (30 mg/kg) and minimum recoverable thickness (0.7 m) of gallium resources exploration. These findings indicate that the Cambrian stone coal deposits, especially in the middle and late Cambrian period, should be considered as promising alternative sources of gallium. The anomalous gallium-enriched sediments originated from a complex combination of hydrothermal fluids, original biomass and terrigenous materials. For the M1 stone coal-bearing seams, gallium most likely occurred in the mode of GaAs, GaxIn1-xAs and GaO(OH), while modes of gallium in the M2 to M4 seams is interrelated with the organic affinity and clay minerals. The crude reserve estimate of gallium resources in central China is approximately 10.06 × 104 tons, corresponding to a super-large coal-hosted gallium ore deposit. The unique paleogeographic location and geological structure in central China resulted that this newly discovered deposit is a unique type of gallium-enriched deposit that has been discovered worldwide. These discoveries will provide the critical parameters when developing distinctive beneficiation processes and appropriate extraction procedures, as well as guidance and effective for future prospecting regions of gallium resources around the globe, involving a combination consider the distribution of regional deep–large fault zones and the middle to late Cambrian black rock series deposits.

Determination of Fe2+/Fe3+ Ratios of Magnetite using Different Methods: A Case Study from the Qimantag Metallogenic Belt

AbstractDetermination of Fe2+/Fe3+ ratios from metallogenic belts to explore controlling physical and chemical conditions of rock formation is of great significance. In order to explore magnetite Fe2+/Fe3+ ratios of the Qimantag metallogenic belt, part of the Eastern Kunlun orogenic belt in the northeastern margin of the Qinghai–Tibetan plateau, western Central Orogenic Belt of China, and overcome the limitation of the traditional electronic probe, five different measurement methods are proposed and their respective advantages and disadvantages evaluated, with the composition data of the magnetite obtained using electron probe microanalysis (EPMA). The direct oxygen measurement method has a significant impact on the determination results of FeO and Fe2O3, but the accuracy and uniformity of the results are low. The valence method (Flank method) based on the spectral intensity ratio of Lα to Lβ for iron is also unreliable for FeO and Fe2O3 measurements because it is difficult to establish a relationship between Lβ/Lα, the spectral intensity ratio, and the Fe2+/Fe3+ content ratio. In comparison, the charge difference method, the surplus‐oxygen method and the Mössbauer spectrum method are still the most favorable. Mössbauer spectroscopy, with its isomer movement particularly sensitive to the oxidation state of iron, yields results closer to 0.5, which is relatively reliable. Earlier magnetite deposits are located in intrusions or contact zones and formed by magmatic fluids with high Fe2+/Fe3+ ratios, whereas later magnetite deposits are farther away from intrusions and have low Fe2+/Fe3+ ratios. The transformation mechanism of hematite and magnetite in the Qimantage metallogenic belt is also studied. No large volume changes, such as pore filling and shrinkage fracture, were detected in the metallogenic belt, and the transformation mechanism is more similar to a reoxidation and reduction mechanism.

Special issue on tectonic, magmatic and metallogenetic evolution of the central China orogenic belt

ABSTRACT Special Issue on Tectonic, Magmatic and Metallogenetic Evolution of the Central China Orogenic Belt.

Petrogenesis and Tectonic Implications of the Triassic Granitoids in the Ela Mountain Area of the East Kunlun Orogenic Belt

The East Kunlun Orogenic Belt is located in the western part of the Central Orogenic Belt of China, with a large number of Triassic igneous rocks parallel to the Paleo-Tethys ophiolite belt, which provides a large amount of geological information for the tectonic evolution of the Paleo-Tethys Ocean. The granitoids studied in this paper are located in the Ela Mountain area in the eastern part of the East Kunlun Orogenic Belt. Zircon U-Pb dating results show that these different types of granitoids were crystallized in the Triassic. The 247.5 Ma porphyritic granites from Zairiri (ZRR) displayed calc-alkaline I-type granite affinities, with the zircon εHf(t) values being mainly positive (−0.5 to + 3.8, TDM2 of 1309–1031 Ma), indicating that they are derived from the partial melting of the juvenile crust and mixed with ancient crustal components. The 236.8 Ma Henqionggou (HQG) granodiorites and 237.5 Ma Daheba (DHB) granodiorites are high-K calc-alkaline I-type granite, and both have mafic microgranular enclaves (MMEs), showing higher and more varied Mg# (39.73–62.73), combined with their negative Hf isotopes (εHf(t) = −2.6 to −1.6, TDM2 = 1430–1369 Ma), suggesting that their primary magmas were the products of partial melting of the Mesoproterozoic lower crust that mixed with mantle-derived rocks. The 236.4 Ma DHB porphyritic diorites showed characteristics of high-K calc-alkaline I-type granitoids, with moderate SiO2 contents, medium Mg# values (40.41–40.65), with the Hf isotopes (εHf(t) = −2.9 to −0.5; TDM2 = 1451–1298 Ma) indistinguishably relative to contemporaneous host granodiorites and MMEs. The petrographic and geochemical characteristics indicate that the porphyritic diorites are the product of well-mixed magma derived from the Mesoproterozoic lower crust and lithospheric mantle. Based on the results of this paper and previous data, the chronology framework of Late Permian–Triassic magmatic rocks in the eastern part of the East Kunlun Orogenic Belt was constructed, and the magmatic activities in this area were divided into three peak periods, with each peak representing an extensional event in a particular tectonic setting, for example, P1 (slab roll-back in subduction period; 254–246 Ma), P2 (slab break-off in transition period of subduction and collision; 244–232 Ma), P3 (delamination after collision; 230–218 Ma).

Triassic provenance shifts and tectonic evolution of southeast Ordos Basin, Central China

Tectonic evolution of the North China Craton underwent a complicated process during the early Mesozoic owing to almost simultaneous closures of the Mianlue Ocean to the south and the Palaeo-Asian Ocean to the north. The tectonic setting of the Triassic sedimentary basin in the southern North China Craton remains a subject of debate. The conventional view is that early Mesozoic basins resulted from plate collision and crustal shortening, whereas new petrological evidence of crustal extension has been identified in the southern North China Craton. In this study, we used petrology, sedimentology, subsidence and geochronology to trace basin provenance and reconstruct source-to-sink around the southeast Ordos Basin. The petrographic modal compositions showed that the provenance changed from recycled orogenic to a mixture of recycled orogenic and arc magmatic materials. Tectonic subsidence of the southeast Ordos Basin revealed two episodes of rapid subsidence, the second of which lasted ~10 Ma and caused the depocenter of the basin to move southward. Early Triassic detrital zircons with distinguishing ages of 1100–700 Ma were derived from the Central China Orogenic Belt and North China Craton; then, they were sourced from the Inner Mongolia Palaeo-uplift, based on zircon ages clustered at ~400–250 Ma. The petrographic modal composition, tectonic subsidence and zircon age distribution imply a provenance shift from short and rapid uplift (North Qinling Orogenic Belt) to remote continuous uplift (Inner Mongolia Palaeo-uplift); this is also supported by the palaeo-current direction. This shift defined a change in the Qinling Orogenic Belt from collision and uplift to extension, which caused the depositional centre of the Ordos Basin to move southward. This integrated tectono-sedimentary environment study provides new insight into the closure process of the Mianlue Ocean during the Triassic and its impact on the tectonic environment of the southern North China Craton.

Mineralogy and geochemistry of tellurides and pyrite from the Laowan Au−Ag−Te deposit, Qinling−Dabie orogenic belt, central China: Implications for ore genesis

The Laowan Au − Ag − Te deposit (containing greater than 100 t Au), located at the center of the Qinling − Dabie orogenic belt in central China, represents a breakthrough in gold prospecting in the Tongbai district. A tunnel geological survey and microscope-based mineral identification, combined with EMPA/EDS mapping and LA-ICP-MS analysis, were used in this study to determine the mineral types present. The sequence of formation and symbiosis were determined using the Au-hosting mineral geochemical element typomorphism to provide a basis for Au enrichment and the sources of material and ore − forming fluids. The results indicate that: (1) Tellurides were widespread in the main metallogenic auriferous pyrites, consisting of petzite, calaverite, tellurobismuthite, tetradymite, volynskite, and hessite. The vertical zonation of different telluride combinations indicates that mineral distribution shows the vertical zoning characteristics of upper Ag and lower Bi. (2) Petrographic analyses indicate that 5 generations of pyrite formed during the ore-forming stage (Py1, Py2, Py3, Py4, and Py5). LA-ICP-MS analytical data showed that Py3 and Py4 were rich in Au − Ag − Bi − Te, with a correlation between gold and tellurium. Auriferous pyrites were rich in both As and Te, and the enrichment of Au was unrelated to As. Te is an important scavenger of gold, the effect of As is not obvious. (3) From 250 °C to 200 °C, logfTe2 and logfS2 decreased from − 13.0 to − 8.3 and − 14.7 to − 8.6 to − 15.2 to − 11.2 and − 16.7 to − 10.5, respectively. fTe2, fS2 and temperature were the conditions controlling variations in the telluride combination. (4) The occurrence of tellurides, the correlation of Au − Ag − Bi − Te elements and enrichment of Te and Bi, combined with previous isotopic geochemical data, indicate that the ore-forming fluids and metals might be stemmed from the mantle-derived magmatic system, which could have provided materials, sufficient heat energy, volatiles, and components for the gold mineralisation.

HP–UHT granulites in the East Kunlun Orogen, NW China: Constraints on the transition from compression to extension in an arc setting of the Proto‐Tethys Ocean

AbstractThe East Kunlun Orogen (EKO) of the northwest part of the Central China Orogenic belt records long‐lived orogenic events from the Cambrian to the Triassic, involving the tectonic evolution from Proto‐Tethys to Palaeo‐Tethys. Although high‐ and ultra high pressure (HP‒UHP) metamorphism has been recognized in the EKO, other metamorphic events associated with the orogenic history are little known. The metamorphic history of high‐ and ultra high temperature granulites and their pressure–temperature–time (P‒T–t) path is keys to reconstructing tectonic events associated with a subduction‐to‐collision transition. In this contribution, we present P‒T–t results for the mafic and pelitic granulite facies metamorphic rocks in the Qingshuiquan region of the EKO, determined using phase equilibrium modelling and zircon geochronology. The Jingshuikou granulite terrane records a clockwise P–T path with high‐P and ultra high temperature (HP–UHT) conditions at Pmax ~900 to 950°C at 13 kbar, at Tmax of ~950°C at 9‒12 kbar, and a final stage of 800‒895°C at 6‒10 kbar. LA‐ICP‐MS U–Pb dating of zircons provides systemic constraints on a long‐lived metamorphic age span of 530‒465 Ma, with a peak of c. 503 Ma. The HP–UHT metamorphism of the Qingshuiquan granulite terrane reveals a complete process from arc compression at the early stage of subduction to extension on the active continental margin related to rollback of the subducted slab in the Early Palaeozoic, driven by heat transfer from upwelling of the sub‐arc hot asthenosphere. The timing and P‒T conditions of the high geothermal gradient metamorphism can be used to understand the subduction and collision process of the Proto‐Tethys Ocean, including the relationship between high‐P and high‐ to ultra‐temperature metamorphism in the East Kunlun and other orogenic belts.

Zircon U–Pb geochronology and geochemistry of plagiogranites within a Paleozoic oceanic arc, the Erlangping unit of the Qinling accretionary orogenic belt: Petrogenesis and geological implications

Plagiogranites are a volumetrically minor component of oceanic crust and ophiolites, but offer an opportunity to probe the processes and mechanisms by which felsic crusts were produced from the mafic oceanic crusts. The Qinling-Tongbai orogenic belt in central China is a typical composite orogenic belt that records the amalgamation processes between the North China Block and the South China Block. The Erlangping unit represents an accretionary oceanic unit in the Qinling-Tonbai orogenic belt and contains minor plagiogranites, which have received little attention. In this study, we carried out an integrated study of U–Pb geochronology and Hf–O isotopes in zircon, as well as whole-rock isotope and geochemical analyses for felsic rocks in the Erlangping unit. These rocks occur as dikes to stocks intruding ambient basalts. They have relatively high Na2O and Al2O3, moderate MgO and low K2O contents, and are classified as oceanic plagiogranites. Zircon U–Pb geochronology yielded formation ages of ca. 465 Ma. Zircon δ18O compositions (4.4–5.1‰) are lower than or similar to those of zircons from normal mantle. The low TiO2 content, elevated Zr/Hf, and light rare-earth element (LREE) enrichments in these rocks indicate that these plagiogranites were generated by partial melting of hydrothermally altered oceanic crust. These samples have more depleted whole-rock εNd(t) (+4.4 to +5.1) and zircon εHf(t) (+10.5 to +12.8) values than the basaltic wall-rocks, implying they were derived from a newly accreted oceanic arc. Taking into account the tectonic framework of the broader Qinling Orogenic belt, a subduction-induced magma flare-up in the Ordovician could have triggered the anatexis of the existing Erlangping oceanic arc, and in turn generated these plagiogranites. Partial melting of oceanic crust that has been enriched in a subduction system may be an important mechanism for the formation and maturation of continental crust in oceanic arc settings.

Zircon U–Pb geochronology and geochemistry of the Lajimiao mafic complex in the Shangdan Suture Zone, Qinling orogen: Petrogenesis and tectonic implications

The Shangdan Ocean represents the eastern branch of the Proto-Tethys Ocean, which is important to decipher the evolution of the Central China Orogenic Belt. However, its evolution is still in debated. In this contribution, we carried out an integrated study of zircon UPb ages, whole-rock geochemistry, as well as zircon HfO isotope compositions for the Lajimiao mafic complex in the Shangdan Suture Zone in the North Qinling orogen. The Lajimiao mafic complex is composed of coarse-grained gabbros to norite-gabbros (Group 1) in the inner and fine-grained diorites (Group 2) in the outer part. The Group 1 samples are comprised predominantly of salite to augite (Mg# = 75–80), magnesi-hornblende (Mg# = 65–67) and Ca-rich plagioclase (An = 45–67); the Group 2 samples are comprised predominantly of magnesi-hornblende (Mg# = 60–66) and plagioclase (An = 28–53). New SIMS and LA-ICP-MS UPb dating of zircon grains from a gabbro and a diorite sample yielded similar weighted mean ages of 412 ± 4 Ma and 414 ± 2 Ma, indicating that they were formed simultaneously. The Group 1 samples have relatively low SiO2 (49.56–50.78 wt%), high MgO (6.67–7.70 wt%) and Fe2O3T (7.46–9.61 wt%) contents, while the Group 2 samples have relatively high SiO2 (57.74–59.53 wt%), low MgO (3.28–3.42 wt%) and Fe2O3T (5.76–7.01 wt%) contents. They both belong to calc-alkalic series and enriched in large ion lithophile elements (LILEs), light rare earth element (LREEs) and depleted in high field strength elements (HFSEs), which are typical of arc-related rocks. The Group 2 diorites exhibit relative enrichment in light rare earth element (LREE) ((La/Yb)N = 10.9–13.1) with slightly negative Eu anomalies (Eu/Eu⁎ = 0.82–0.93), compared to the Group 1 samples ((La/Yb)N = 5.2–9.6; Eu/Eu⁎ = 0.91–1.43). Both of them have enriched initial Sr (0.7049–0.7054), and chondritic to slightly depleted Nd (ƐNd(t) = −0.09 ~ +1.50), but depleted whole-rock and zircon Hf isotopic compositions (ƐHf(t) = 7.81–8.10 and 8.2–9.1). The HfNd isotopic systems are decoupled with positive △ƐHf values (5.22 to 5.92) (△ƐHf = ƐHf(t) – (1.59 × ƐNd(t) + 1.28)). The zircon grains display higher δ18O values of 6.3 to 6.5‰ than those of the normal mantle zircon. Whole-rock Pb isotopic compositions of the studied samples are of 15.610–15.624 for 207Pb/204Pb, 38.027–38.178 for 208Pb/204Pb, and 18.100–18.269 for 206Pb/204Pb. These geochemical features indicate that the Lajimiao mafic complex was derived from relatively depleted mantle that had been metasomatized by 2–5% subducted zircon-barren oceanic sediments. Combining with regional geological, geochronological, mineralogical, and geochemical data, the Lajimiao mafic complex was suggested to be generated by partial melting of a phlogopite-bearing mantle source at relatively low pressure in an arc setting. We suggested that the generation of the Lajimiao mafic complex was induced by the subduction of Shangdan Ocean during the early Devonian and thus the eastern branch of Proto-Tethys Ocean might have not been closed until that time.

Combining fuzzy analytic hierarchy process with concentration–area fractal for mineral prospectivity mapping: A case study involving Qinling orogenic belt in central China

We combined cluster analysis, the fuzzy analytic hierarchy process (fuzzy AHP), and the concentration–area (C-A) fractal for mineral prospectivity mapping. First, cluster analysis was used to determine the indicator elements for orogenic Au deposits (omitting redundant geochemical elements). Subsequently, according to pairwise comparisons of mineralization alternatives performed by three exploration experts, a series of fuzzy evaluation matrices were constructed, and the corresponding normalized weights were calculated. Furthermore, on the basis of the multifractal theory, two thresholds for each alternative were obtained (each alternative was divided into a background region, a general anomaly region, and a high anomaly region), and the fuzzy membership function was used to obtain the normalized score of each alternative. Finally, the weight of each alternative was multiplied by the normalized score, and fuzzy superposition was employed to generate a mineralization prediction map, which consisted of high, medium, low, and weak metallogenic potential areas, accounting for 7.05%, 19.67%, 40.99%, and 32.29% of the study area, which contained 4, 1, 1, and 0 of the six known mine occurrences, respectively. The prediction area (P-A) plot indicated that the result predicted 83.3% of Au deposits with an area of 16.7%, indicating that the combination of cluster analysis, the fuzzy AHP, and the concentration–area method is an efficient and economical forecasting method that has guiding significance for mineral prospectivity mapping (MPM).

Geology, fluid inclusions, and H–O–S–Pb isotopes of the Chigou porphyry Cu deposit in Southern Qinling, central China: Implication for ore genesis

The Chigou porphyry Cu deposit is located in eastern segment of the Southern Qinling metallogenic belt, on the southern margin of the Central China Orogenic Belt. Copper mineralization is associated with quartz diorite, quartz diorite porphyry and granite porphyry, and occurs as veins, veinlets, disseminations, or veinlet-disseminations within host porphyries. Ore-forming process could be divided into three stages: stage I quartz + K-feldspar + pyrite ± chalcopyrite, stage II quartz + chlorite + chalcopyrite ± molybdenite and stage III quartz + calcite + pyrite. Four types of fluid inclusions (FIs) were distinguished in quartz-bearing veins, including vapor-rich two-phase (V-type), liquid-rich two-phase (L-type), hypersaline (H-type), and CO2-rich (C-type) inclusions. The FIs were homogenized at temperatures of 330–473 °C for stage I, 174–345 °C for stage II, and 128–272 °C for stage III, with corresponding salinities of 3.8–53.6 wt% NaCl equiv., 1.4–15.1 wt% NaCl equiv., and 0.4–7.7 wt% NaCl equiv., respectively. Hydrogen and oxygen isotope data indicate that the ore-forming fluids have a dominant magma signature and were diluted by meteoric water during the late stage. Chalcopyrite and pyrite from different stages record a narrow range of δ34S values from −0.2 to −2‰, consistent with the sulfur isotopic values of typical magmatic-hydrothermal system. Chalcopyrite has similar 206Pb/204Pb, 207Pb/204Pb, and 208Pb/204Pb ratios to those of porphyry intrusions. All stable and radiogenic isotope results reveal that the ore-forming components (i.e. metal and sulfur) were sourced from a magmatic reservoir with some crustal materials. Laser Raman micro spectroscopy data and fluid inclusion analytical results suggest that the Chigou deposit was formed by an initially high- to intermediate-temperature, high-oxygen fugacity (fO2) and CO2-rich fluid system at an estimated depth of 0.7–2.1 km. Decreases in temperature and fO2 as well as fluid boiling were critical factors controlling sulfide precipitation at Chigou.

Tectonic Setting of the Eastern Margin of the Sino-Korean Block in the Pennsylvanian: Constraints from Detrital Zircon Ages

To test the previous hypothesis that upper Paleozoic sediments in the eastern Sino-Korean Block were mostly derived from the paleo-orogen located to the east, we compared published and new U–Pb age data of detrital zircons from Pennsylvanian strata distributed in the Sino-Korean Block (SKB). The age distributions of detrital zircons from different localities of Pennsylvanian strata in North China reflect varying contributions from the Inner Mongolia Paleo-uplift in the north and the Central China Orogenic Belt in the south. The supply of detritus from the northern source to distant areas, however, appears to have been limited during the Pennsylvanian times. The age distributions of detrital zircons from Korean Pennsylvanian strata located in the east of the SKB are characterized by a dense cluster of 1.84–1.90 Ga and differ from those of North China. The Korean age characteristic is best explained by strong influences of the detritus derived from the Paleoproterozoic Yeongnam Massif in southeastern Korea. Along with the significant number of zircons that record syn- to near-depositional magmatic activities, this observation supports the hypothesis of the existence of an active continental margin setting in the east of the SKB.

Multiple episodes of gold mineralization in the East Kunlun Orogen, western Central Orogenic Belt, China: Constraints from Re-Os sulfide geochronology

The Gouli goldfield (>110 t Au), located in the East Kunlun Orogen, western Central Orogenic Belt of China, is one of the most important goldfields in this area. In the last decade, a number of orogenic gold deposits (e.g., Guoluolongwa and Annage) have been shown to be hosted by rock units of different lithology and ages. Rhenium-osmium (Re-Os) geochronology of sulfides from gold-bearing veins was performed to define the chronologic relationships between gold mineralization present in the metamorphic rocks (Proterozoic and Silurian) of the East Kunlun Orogen. Sulfides (pyrite and chalcopyrite) from pyrite-quartz vein and polymetallic sulfides-quartz vein in the Guoluolongwa gold deposit yield Re-Os isochron dates of 374 ± 15 Ma (MSWD = 4.6; initial 187Os/188Os ratio (Osi) = 0.06 ± 0.22) and 354 ± 7 Ma (MSWD = 0.18; Osi = 0.13 ± 0.01), respectively. Similar ages are also revealed by the pyrite mineral separates from the Annage gold deposit (383 ± 8 Ma and 349 ± 6 Ma). These ages are interpreted to record the timings of the formation of the two vein types in these deposits, which are nominally separated by ~20 Ma.The new Re-Os ages presented here identify the first two Late Paleozoic (Devonian and Early Carboniferous) gold-mineralizing events in the East Kunlun Orogen and thus indicate at least two mineralization epochs in this area given ages (Late Triassic) of other gold systems and field observations. Considering the geological background and temporal distribution of gold deposits in adjacent areas (western Qinling and Qaidam-Qilian), we suggest that gold deposits in the western Central Orogenic Belt were formed in collisional/post-collisional settings being controlled by common tectonic-magmatic activities related to the evolution of both the Prototethys Ocean (Proterozoic – Paleozoic) and Paleotethys Ocean (Paleozoic – Early Cenozoic).Further, the initial Os (Osi) obtained from the Re-Os isochron suggest that for the two vein types in the Guoluolongwa gold deposit the Os and by inference the ore metal (Au) were derived from a mantle-like source (Osi values = ~0.12–0.13), which should be related to the contemporaneous mantle-like magmatism. In contrast, the pyrite-quartz vein in the Annage gold deposit possesses a significantly radiogenic Osi value (3.65 ± 0.51). Given the similar timing of mineralization between the Guoluolongwa and Annage deposits, it is considered that the ore metal likely has a similar origin, i.e., a mantle-like source, however at Annage the hydrothermal fluid interacted with the Proterozoic metamorphic host rocks and leached radiogenic Os that masks any evidence of a mantle-like source.