Central Spot Research Articles

Online Optical Axis Parallelism Measurement Method for Continuous Zoom Camera Based on High-Precision Spot Center Positioning Algorithm

Ensuring precise alignment of the optical axis is critical for achieving high-quality imaging in continuous zoom cameras. However, existing methods for measuring optical axis parallelism often lack accuracy and fail to assess parallelism across the entire focal range. This study introduces an online measurement method designed to address these limitations by incorporating two enhancements. First, image processing methodologies enable sub-pixel-level extraction of the spot center, achieved through improved morphological processing and the incorporation of an edge tracing algorithm. Second, measurement software developed using Qt Creator can output real-time data on optical axis parallelism across the full focal range post-measurement. This software features a multi-threaded architecture that facilitates the concurrent execution of image acquisition, data processing, and serial communication. Experimental results derived from simulations and real data indicate that the maximum average error in extracting the center of the spot is 0.13 pixels. The proposed system provides critical data for optical axis calibration during camera adjustment and inspection.

Preliminary study on temperature distribution and pyroelectric current of LiNbO3 heated by nanosecond pulse laser

In order to reduce the volume of compact neutron generators, a lot of investigations are carried out on generating high voltages by heating pyroelectric crystals with external heating. Laser irradiation is an effective non-contact heating method. Different laser parameters determine the crystal's temperature distribution, impacting the accelerating electric field. A preliminary study on the temperature distribution and pyroelectric current response of LiNbO3 heated by nanosecond pulse laser is presented, including both direct heating and heating with Cu and Ti disks adhered to the crystal. A two-dimensional transient heat transfer and circuit model is constructed in COMSOL. To validate the simulation model of temperature field distribution, FLIR thermal camera is utilized to measure the temperature in laser spot center experimentally. The experimental results coincide with simulations, which prove that the simulation model can predict temperature field distribution of the pyroelectric crystal effectively. This study can benefit the optimization of laser parameters for modulating high-quality deuterium ion acceleration fields.

Precision Polishing of Ablator Capsules via in situ Process Monitoring and Machine Learning–Based Optimization

In inertial confinement fusion (ICF) experiments seeking output gains of unity and beyond, the quality of the ablator capsule is paramount for minimizing the hydrodynamic mix that quenches the central hot spot. Defects in the form of foreign particles or missing mass on the surface and within the wall of the capsule are primary offenders. High-density carbon capsules made for ICF experiments at the National Ignition Facility are precision polished to achieve surface smoothness on the order of a few nanometers as well as to minimize isolated defects in the form of pits. Given the critical role of this process, we are developing smart manufacturing techniques with the goal of elevating the efficiency of this process. Our approach is to use MEMS (micro-electromechanical systems)–based sensors to capture the fine vibration signals generated during the polishing process and combine them with synchronized visual feedback as needed. Beyond using these sensors for process monitoring, we use specific deep learning methods to analyze the data and extract correlations with both the process parameters and the final performance of the polishing run. Here, we describe the multiple fronts we have explored in this regard and the results we have gotten so far. This approach promises to have the potential to ultimately provide real-time feedback that can be used to ensure the progress of the run as well as a means for faster optimization.

Beam-shaping in laser-based powder bed fusion of metals: A computational analysis of point-ring intensity profiles

Laser-based powder bed fusion has the potential to enable manufacturing of local material properties and locally varying alloys. One promising approach under research is shaping of the applied laser beam. The current commercial standard using a Gaussian laser beam profile is associated with a high energy intensity peak and strong gradients. A potential alternative beam shape is the point-ring profile where laser energy is distributed between a central spot and an outer ring. We conduct a numerical study of beam shape impact on melt-pool shapes, surface temperatures, evaporation and flow dynamics of single-melt-tracks. To that end, we apply a Weakly Compressible Smoothed Particle Hydrodynamics solver coupled with a ray-tracing laser scheme. A point-ring profile is compared to a standard Gaussian profile. The profiles are studied at two different beam sizes to find the influence of beam size on the shape effect. We find good agreement between numerical results and experimental data for both narrow and deep, as well as wide and shallow melt-tracks. The simulation results show that beam size and thus energy density influence the effect beam-shaping has on the melt-pool dynamics. Both the distribution of evaporation and surface tension forces over the melt-pool surface are found to depend on the used beam shape. The study highlights the importance of distinguishing between size and shape effects when investigating laser beam shapes. Both energy density and its distribution need to be tuned for the desired melt-pool behavior.

Bessel-Beam Single-Photon High-Resolution Imaging in Time and Space

Synchronous laser beam scanning is a common technique used in single-photon imaging where the spatial resolution is primarily determined by the beam divergence angle. In this context, Bessel beams have been investigated as they can overcome the diffraction limit associated with traditional Gaussian beams. Notably, the central spot of a Bessel beam retains its size almost unchanged within a non-diffractive distance. However, the presence of sidelobes in the Bessel beam can negatively impact spatial resolution. To address this challenge, we have developed a single-photon imaging system with high-depth resolution, which allows for the suppression of echo photons from the sidelobe light in the depth image, particularly when their flight time differs from that of the central spot. In our LiDAR setup, we successfully achieved high-resolution scanning imaging with a spatial resolution of approximately 0.5 mm while also demonstrating a high-depth resolution of 12 mm.

Leber’s Hereditary Optic Neuropathy Following Unilateral Syphilitic Optic Neuritis

This report describes a case of Leber’s hereditary optic neuropathy (LHON) following unilateral syphilitic optic neuritis. A 31-year-old man presented with a four-day history of decreased vision in his left eye. At the initial visit, the patient’s best corrected visual acuity (BCVA) was 1.2 and 0.02 in the right and left eye, respectively, along with a relative afferent pupillary defect in the left eye. Goldmann visual field testing revealed a central absolute scotoma and an enlarged blind spot in the left eye. Serological testing confirmed syphilis with rapid plasma reagin positivity. The patient was diagnosed with syphilitic optic neuritis and treated with intravenous penicillin G (24 million units daily) for two weeks. After two weeks of therapy, his left BCVA improved to 0.4 after two months. However, five months later, despite completing syphilis treatment, the patient developed acute painless visual loss in both eyes. His BCVA decreased to 0.8 and 0.05 in the right and left eyes, respectively. Goldmann visual field testing revealed a central absolute scotoma and an enlarged blind spot in both eyes. After two weeks, BCVA progressively declined to 0.4 in the right and 0.04 in the left eye. Furthermore, Goldmann visual field testing revealed an enlarged central absolute scotoma and blind spot in both eyes. Six months after the initial examination, his BCVA was counting fingers and 0.02 in the right and left eye, respectively. The optic discs appeared diffusely pale in both eyes. Genetic testing for LHON revealed a pathologic mtDNA 11778 point mutation. This case underscores the importance of considering the possibility of LHON if acute or subacute vision loss occurs subsequently or simultaneously in both eyes and remains unresponsive to treatment.

Learning From the Global Experience in Conflict Prevention

This article identifies some of the central blind spots in the Western understanding of conflict prevention. On the one hand, this is achieved by referencing research that contrasts elements of Western conflict prevention approaches with more successful non-Western methods. On the other hand, the article summarizes research indicating which framings and social realities predict conflict onset and escalation, exposing intellectual approaches that are detrimental to conflict prevention. Throughout this exploration, the article also unveils my personal intellectual history and development in the field of peace studies.

Rapid measurement method for key dimensions of train wheelset based on improved image processing algorithm

The key dimensions of train wheelsets change with the increase of running time. To ensure the safe operation of the train, the key dimensions should meet the relevant technical requirements. Maintenance of wheelsets and measurement of key dimensions are important part of the daily maintenance work. A rapid measurement method based on image processing algorithms for key dimensions of hand-held wheelsets integrating multiple parameter measurements is studied. The general framework of the system is examined and the roles of the modules are described. The optical center for the initial position of the continuous line spot is searched. The continuous line spot center extraction algorithm during tread measurement is optimized. A three-dimensional model is reconstructed using point cloud data, then key dimensions are measured and calculated from the model. In order to verify the feasibility of the method, traditional measurement methods are used for comparison tests. The results show that the method is effective in the daily maintenance of trains.

Tissue characterization using axicon probe-assisted common-path optical coherence tomography

In this work, a common-path optical coherence tomography (OCT) system is demonstrated for characterizing the tissue in terms of some optical properties. A negative axicon structure chemically etched inside the fiber tip is employed as optical probe in the OCT. This probe generates a quality Bessel beam owning a large depth-of-field, ∼700 µm and small central spot size, ∼3 µm. The OCT system is probing the sample without using any microscopic lens. For experimental validation, the OCT imaging of chicken tissue has been obtained along with estimation of its refractive index and optical attenuation coefficient. Afterwards, the cancerous tissue is differentiated from the normal tissue based on the OCT imaging, refractive index, and optical attenuation coefficient. The respective tissue samples are collected from the human liver and pancreas. This probe could be a useful tool for endoscopic or minimal-invasive inspection of malignancy inside the tissue either at early-stage or during surgery.

Simulation of the reflection of a high energy laser beam at the sea surface for hazard and risk analyses

The application of a high energy laser beam in a maritime scenario necessitates a laser safety concept to prevent injury to personnel or uninvolved third parties from uncontrolled reflections of laser light from the sea surface. Therefore, it is crucial to have knowledge of the amount and direction of reflected laser energy, which varies statistically and depends largely on the dynamics of the wavy sea surface. These dynamics are primarily influenced by wind speed, wind direction, and fetch. An analytical model is presented for calculating the time-averaged spatial intensity distribution of the laser beam reflected at the dynamic sea surface. The model also identifies the hazard areas inside which laser intensities exceed a fixed exposure limit. Furthermore, as far as we know, our model is unique in its ability to calculate the probabilities of potentially eye-damaging glints for arbitrary observer positions, taking into account the slope statistics of gravity waves. This is a critical first step toward an extensive risk analysis. The simulation results are presented on a hemisphere of observer positions with fixed radii from the laser spot center. The advantage of the analytical model over our numeric (dynamic) model is its fast computation time. A comparison of the results of our new analytical model with those of the previous numerical model is presented.

Infall Motions in the Hot Core Associated with the Hypercompact H ii Region G345.0061+01.794 B

We report high angular resolution observations, made with the Atacama Large Millimeter Array in band 6, of high excitation molecular lines of CH3CN and SO2 and of the H29α radio recombination line toward the G345.0061+01.794 B HC H ii region in order to investigate the physical and kinematical characteristics of its surroundings. Emission was detected in all observed components of the J = 14 →13 rotational ladder of CH3CN and in the 304,26–303,27, and 324,28–323,29 lines of SO2. The peak of the velocity-integrated molecular emission is located ∼0.″4 northwest of the peak of the continuum emission. The first-order moment images and channel maps show a velocity gradient of 1.1 km s−1 arcsec−1 across the source and a distinctive spot of blueshifted emission toward the peak of the zero-order moment. The rotational temperature is found to decrease from 252±24 K at the peak position to 166±16 K at its edge, indicating that our molecular observations are probing a hot molecular core that is internally excited. The emission in the H29α line arises from a region of 0.″65 in size, where its peak coincides with that of the dust continuum. We model the kinematical characteristics of the “central blue spot” feature as due to infalling motions, suggesting a central mass of 172.8±8.8 M ⊙. Our observations indicate that this HC H ii region is surrounded by a compact structure of hot molecular gas, which is rotating and infalling toward a central mass, that is most likely confining the ionized region. The observed scenario is reminiscent of a “butterfly pattern” with an approximately edge-on torus and ionized gas roughly parallel to its rotation axis.

Towards the systematic reconnaissance of seismic signals from glaciers and ice sheets – Part 2: Unsupervised learning for source process characterization

Abstract. Given the high number and diversity of events in a typical cryoseismic dataset, in particular those recorded on ice sheet margins, it is desirable to use a semi-automated method of grouping similar events for reconnaissance and ongoing analysis. We present a workflow for employing semi-unsupervised cluster analysis to inform investigations of the processes occurring in glaciers and ice sheets. In this demonstration study, we make use of a seismic event catalogue previously compiled for the Whillans Ice Stream, for the 2010–2011 austral summer (outlined in Part 1, Latto et al., 2024). We address the challenges of seismic event analysis for a complex wave field by clustering similar seismic events into groups using characteristic temporal, spectral, and polarization attributes of seismic time series with the k-means++ algorithm. This provides the basis for a reconnaissance analysis of a seismic wave field that contains local events (from the ice stream) set in an ambient wave field that itself contains a diversity of signals (mostly from the Ross Ice Shelf). As one result, we find that two clusters include stick-slip events that diverge in terms of length and initiation locality (i.e., central sticky spot and/or the grounding line). We also identify a swarm of high-frequency signals on 16–17 January 2011 that are potentially associated with a surface melt event from the Ross Ice Shelf. Used together with the event detection presented in Part 1, the semi-automated workflow could readily be generalized to other locations and, as a possible benchmark procedure, could enable the monitoring of remote glaciers over time and comparisons between locations.

Spatiotemporal reshaping of femtosecond laser pulses on interaction with gas sheath at ionization saturation intensity regime

Interaction of intense ultrashort laser pulse with gases generates a transient spatiotemporal electron density distribution via field ionization, which may lead to the spatiotemporal reshaping of the pulse, viz., its beam profile, pulse width, etc. Here, we present an experimental study on ultrashort laser pulse interaction with argon gas sheath in an ionization saturation intensity regime (∼1015–1017 W/cm2). The present investigation has been performed using a 6 mJ, 1 kHz, and 55−60 fs Ti:Sapphire laser pulse interaction with a ∼2.5 mm long argon sheath. After the laser gas interaction, the laser spatial profile exhibits a multi-ring structure around a central maximum spot. Laser gas interaction parameters, such as laser intensity, gas pressure, etc., affect the ring pattern significantly. Under optimum parameter conditions, the laser pulse has two rings in spatial profile, and the pulse width of the central spot is self-compressed to ∼35 fs. A theoretical calculation reveals that the laser beam’s spatiotemporal profile evolves as it propagates inside the gas sheath. The calculation also demonstrates that the gas ionization profile plays a crucial role in the spatiotemporal reshaping and self-compression of the laser beam. The calculation also shows that the generation of concentric ring patterns in the spatial profile is mainly due to the ionization of argon atoms into Ar+, Ar2+, and Ar3+ species in the interaction region. Such self-compressed laser pulses with concentric ring beam profiles may be useful for high-harmonic generation and shorter attosecond pulse trains.

Deposition of silica in sorghum root endodermis modifies the chemistry of associated lignin.

Silica aggregates at the endodermis of sorghum roots. Aggregation follows a spotted pattern of locally deposited lignin at the inner tangential cell walls. Autofluorescence microscopy suggests that non-silicified (-Si) lignin spots are composed of two distinct concentric regions of varied composition. To highlight variations in lignin chemistry, we used Raman microspectroscopy to map the endodermal cell wall and silica aggregation sites in sorghum roots grown hydroponically with or without Si amendment. In +Si samples, the aggregate center was characterized by typical lignin monomer bands surrounded by lignin with a low level of polymerization. Farther from the spot, polysaccharide concentration increased and soluble silicic acid was detected in addition to silica bands. In -Si samples, the main band at the spot center was assigned to lignin radicals and highly polymerized lignin. Both +Si and -Si loci were enriched by aromatic carbonyls. We propose that at silica aggregation sites, carbonyl rich lignin monomers are locally exported to the apoplast. These monomers are radicalized and polymerized into short lignin polymers. In the presence of silicic acid, bonds typically involved in lignin extension, bind to silanols and nucleate silica aggregates near the monomer extrusion loci. This process inhibits further polymerization of lignin. In -Si samples, the monomers diffuse farther in the wall and crosslink with cell wall polymers, forming a ring of dense lignified cell wall around their export sites.

Light-Induced Increase of the Local Molecular Coverage on a Surface.

Light is a versatile tool to remotely activate molecules adsorbed on a surface, for example, to trigger their polymerization. Here, we explore the spatial distribution of light-induced chemical reactions on a Au(111) surface. Specifically, the covalent on-surface polymerization of an anthracene derivative in the submonolayer coverage range is studied. Using scanning tunneling microscopy and X-ray photoemission spectroscopy, we observe a substantial increase of the local molecular coverage with the sample illumination time at the center of the laser spot. We find that the interplay between thermally induced diffusion and the reduced mobility of reaction products steers the accumulation of material. Moreover, the debromination of the adsorbed species never progresses to completion within the experiment time, despite a long irradiation of many hours.

Taguchi–gray relational analysis of eccentricity and tilt of multilens module mount fabricated by injection compression molding

AbstractThis study utilizes the mold flow analysis technique of the injection compression molding (ICM) process, combined with the Taguchi–gray relational analysis (GRA), for process optimization analysis on the roundness of the lens holes and the flatness of the lens mount in a 4 × 4 planar multilens array mount. After manufacturing simulation analysis, the eccentricity and tilt information of the lens mount was further evaluated optically through spot diagram analysis upon inserting the same glass lenses. The results showed a positive correlation trend between roundness and flatness in structural deformation analysis, indicating that improving the overall flatness of the lens mount can enhance the roundness of the lens holes. In optical analysis, better improvements in the lens tilt angle were achieved through GRA. In conclusion, aiming to simultaneously improve the roundness of the lens holes and the overall flatness of the lens mount, the Taguchi–GRA method can achieve the optimization objectives. In terms of optical performance, by optimizing for roundness, it is possible not only to reduce the diameter of the light spot but also to simultaneously reduce the offset displacement of the light spot center on the screen. The method proposed in this paper can serve as an analytical model for the design and fabrication of plastic multilens mount.

A new species of the genus Homalocerus Schoenherr, 1839 (Coleoptera: Belidae) from south-eastern Brazil

A new species, Homalocerus vanini sp. n., of the subtribe Homalocerina (Belini, Belinae) is described and illustrated from the State of Rio de Janeiro, Brazil. The new species is similar to Homalocerus flavicornis Vanin, 1976 but differs in a thinner and more strongly curved rostrum, a pronotum with narrow lateral stripes of hairs and without a central spot, apices of the base of the elytra without spots of hairs, and larger body size.

Uncovering the mechanism of the LME susceptibility for the galvanized and electrogalvanized DP 1180 steels

Zn-based coatings generally protect dual-phase (DP) 1180 advanced high-strength steel in automobiles from corrosion. However, liquid metal embrittlement (LME) tends to occur in Zn-coated DP 1180 steel during resistance spot welding. In this study, the LME phenomena of the galvanized (GI) and electrogalvanized (EG) DP 1180 steels were compared based on the LME susceptibility evaluation standard. For DP 1180 steel coated with GI, the maximum length of the LME crack was approximately 121.2 μm at the shoulder of the welding spot. In contrast, for the specimen coated with EG, the maximum length of the LME crack was 792.6 μm at the center of the welding spot. Owing to the different galvanizing processes, the microstructure differed during annealing, thereby influencing the occurrence of the LME. Furthermore, the microstructural observations indicated that the protection of the interfacial oxide layer in the GI specimen could prevent the formation of the LME to some extent. Therefore, the presence of the interfacial oxide layer could account for the different LME susceptibilities of the GI and EG DP 1180 steels.

Precision prediction of beacon center spot in atmospheric turbulent environments

Atmospheric turbulence in the laser propagation path induces phase distortion and adversely affects the acquisition of the beacon spot center for satellite–ground laser links. We introduce an optical flow method to track multiple feature points and obtain the overall motion state of the light spot to predict the inter-frame offset and offset direction of the center position of the light spot. We combined rough and specific selections to improve the feature point selection and proposed a feature point exit and supplement mechanism suitable for an atmospheric turbulence environment. The algorithm outperformed traditional algorithms in terms of stability and accuracy in experimental verification, providing a simple and high-precision solution for predicting beacon spot centers under turbulent atmospheric conditions.

First report of Hibiscus soymovirus in Hibiscus rosa-sinensis in Colombia in mixed infection.

Hibiscus is native to southeast Asia but well suited to Colombia's arid soil and dry climates from the coast to the mountains of Bogotá. Viruses infecting hibiscus in Colombia are largely unexplored, with four viruses previously known: hibiscus chlorotic ringspot virus (HCRSV), hibiscus latent Fort Pierce virus (HLFPV), hibiscus latent Singapore virus (HLSV), and citrus leprosis virus C2 (CiLV-C2) (Padmanabhan et al., 2023). Mixed infections between these viruses were frequently detected. A recent virome analysis of a single hibiscus plant from Colombia revealed multiple viruses in mixed infection; : HCRSV, HLFPV, passion fruit green spot virus (PFGSV), a strain of physalis vein necrosis nepovirus, four novel carlavirus, one new potexvirus and a mitovirus. In addition, few smaller contigs of blunervirus and soymovirus were also identified in the high throughput sequencing (HTS) data, but their presence in the mixed infection could not be validated (A. Roy et al. 2023unpublish data). During Brevipalpus-transmitted virus (BTV) surveys, two asymptomatic and 15 hibiscus foliar samples showing green ringspots with central chlorotic spots in senescing areas, mosaic, and black or chlorotic spots were collected from six departments (states) in three geographical regions of Colombia: Tolima (n=4) and Cauca Valley (n=2) (Andean region), Meta (n=6) and Casanare (n=1) (Orinoquia region), and Quindío (n=1) and Risaralda (n=1) (coffee growing region). About 100 mg of 17 hibiscus leaf samples were separately processed for RNA isolation without DNase I treatment and tested for known BTVs, and for newly discovered hibiscus soymovirus (HSV; genus Soymovirus family Caulimoviridae) using PCR assays (Padmanabhan et al. 2023, Wang et al. 2023). To identify potential HSV infection in the samples, published SVF1/SVR1 and newly designed primer pairs (HSV-REP-F/-R and HSV-CPG-F/-R) were used to amplify the 430 nt transactivation (ORF-VI), 631 nt replicase (REP) and 401 nt coat protein gene (CPG), respectively (Supplementary 1). Of 17 samples tested, three from Tolima and one each from Meta and Quindío yielded all three expected size amplicons. Bi-directional sequencing followed by BLASTn analysis revealed 95-98% nt identity with the CPG, REP, and ORF-VI genes of HSV (OP757659). Ribo-depleted libraries were prepared using the RNA extracts of five HSV PCR positive samples. HTS yielded 11.6 to 50.3 million raw reads per sample library. Adapters were trimmed and filtered from the raw reads with Trimmomatic v0.39 and then assembled using SPAdes v3.15.5 (Padmanabhan et al., 2023). Contigs were blasted against the Arabidopsis proteome and a RefSeq-based viral protein database. Potential viral sequences were then blasted against the complete NCBI nr database. Assembled soymo contigs covered 99-100% of the HSV genome, with per-nucleotide read depths of 23.8 to 393. Contigs from the Tolima (Accessions; OR621030- OR621032 and Quindío samples (OR621033) covered 99-100% of the HSV genome and had >96-98% nt identity to Hawaiian isolate (OP757659) whereas the Meta sample contigs covered 78% of the genome with 9495% nt identity. HTS contigs shared >98-99% nt identities with their PCR amplicons. Along with HSV, other virus sequences (HCRSV, HLFPV, PFGSV, CiLV-C2, and mycoviruses) were variously detected from all five libraries. Due to mixed infection no symptom similarity was noticed among these 5 samples. The findings in hibiscus in Tolima, Meta and Quindío represent the first confirmed report of HSV infection in hibiscus in Colombia. The widespread distribution suggests the possibility of HSV dispersion via movement of planting material, and potential further spread to another hibiscus growing region.