Central Porphyrin Research Articles

Rigid and Flexible Bis-Porphyrinic Tweezers: Efficient Molecular Recognition of Bidentate Bases

Increasing efforts are devoted to the synthesis of cofacial bis-porphyrinic tweezers able to complex various bidentate guests through axial coordination of the Zn(II) porphyrins by the two nitrogen atoms. Elaboration of rigid receptors appeared up to now as the ideal way to pre-organize a bis-porphyrinic cavity and increase the stability of the formed host/guest complexes. However, the choice of using rigid spacer to attach the two porphyrins together may cost a lot as far as solubility and stability are concerned. The synthetic pathways necessary to achieve the synthesis of rigid systems are frequently long and tedious. We report here the synthesis and studies of new flexible bis-porphyrinic tweezers bearing uridine as linkers and offering pre-organized cavities able to welcome bidentate guests with extremely high association constants.As part of our studies concerning complexation of bidentate Lewis bases by bis-porphyrinic tweezers, we have synthesized two new bis-porphyrins bearing a flexible nucleosidic linker. Both uridine and 2’-deoxyuridine spacers were chosen on account of some observations we made a few years ago on the unexpected blocked conformations adopted by a pentaporphyrin consisting of four Zn(II) porphyrins attached to a central free-base porphyrin by four nucleosidic linkers. Since we observed no such blocked conformations in other flexible pentaporphyrins, we thought this might be due to the nucleosidic nature of the linkers. We thus synthesized two dimers, which differ by the attachment positions of the two porphyrins.The ability of these two tweezers to accomodate guests was investigated through ligand binding studies carried out in dichloromethane with DABCO as bidentate base. The complexation of DABCO by these dimers was monitored by UV-visible spectrophotometric titration in CH2Cl2. The binding constants between these two tweezers and DABCO were calculated from UV-visible spectroscopic data. These association constants are unexpectedly increased by more than one order of magnitude as compared to the association constants of the same bidentate ligand with a reference Zn(II) mono-porphyrin. This enhanced stability of the complexes may be ascribed to a pre-organization of the bis-porphyrinic tweezers forming a cavity, and provides convincing evidence that the bidentate base is inserted into the cavity of the dimers via host/guest interactions.We demonstrated that similar association constants can be obtained with flexible tweezers bearing uridine as linker and rigid tweezers. However, the stability of these flexible complexes isn’t as convincing as for our rigid tweezers bearing a tris-anthracenic spacer since the addition of an excess of DABCO destroys all the flexible complexes.Molecular modelling of one of the flexible tweezers and its 1/1 complex with DABCO is represented below, as well as our rigid tweezers bearing a tris-anthracenic spacer. Acknowledgements This work was supported by the CNRS and the French Ministry of Research.

Synthesis, Electrochemistry and Photochemistry of Hypervalent Phosphorus(V) Porphyrin and Antimony(V) Porphyrin Black Dyes

In the last few years, our focus has been on push-pull type hypervalent Group 15 porphyrins with intramolecular charge transfer (ICT) properties. Insertion of P(V) or Sb(V) ion in the porphyrin cavity results in a highly electron-deficient porphyrin center, under this condition the presence of electron-rich units in porphyrin meso-positions results in charge transfer within the molecules. Recently, we extended this strategy to 5,10,5,20-tetrakis(triphenylamine)porphyrin derivative where strong electron donor triphenylamine (TPA) units are in meso-positions. Upon insertion of the P(+5) and Sb(+5) ion, the resulting hypervalent Group 15 porphyrins manifested a strong ICT from the TPA units to the central porphyrin ring. The existence of ICT makes the absorption profiles cover the entire visible region with high molar extinction coefficients. Due to this reason, the studied hypervalent Group 15 porphyrins appear as black dyes. Here, I will present these porphyrins and discuss their structural, redox, and remarkable photophysical properties. Figure 1

Synthesis of porphyrin triads chelated with thallium(III) for studies of ground-state hole/electron transfer

Four target all-porphyrin triads have been prepared for fundamental studies of ground-state hole/electron transfer. Each triad contains thallium(III) porphyrins as bookends, which bear mesityl groups at the three non-linking meso-positions. The central porphyrin is a free base or thallium(III) porphyrin bearing mesityl or pentafluorophenyl groups at the two non-linking meso-positions. The linker is a 4,4′-diphenylethyne unit joined at the porphyrin meso-positions. The net spacer between the two bookend thallium(III) porphyrins thus consists of diphenylethyne–porphyrin–diphenylethyne and is designed as a superexchange element for through-bond hole/electron transfer. The energetics of the superexchange element are tunable given the nature of the substituents and metalation state of the central porphyrin. The synthesis entailed Sonogashira coupling of two building blocks, a free base bis(4-iodophenyl)porphyrin and a mono-ethynylporphinato thallium(III) chloride. Two benchmark porphyrins also were prepared. Absorption spectral comparisons are provided including of the all-thallium(III) monomer, dimer, and triad.

Protonated Z-scheme CdS-covalent organic framework heterojunction with highly efficient photocatalytic hydrogen evolution

The low efficiency of photocatalytic hydrogen production from water is mainly suffer from limited light absorption, charge separation and water delivery to the active centers. Herein, an inorganic–organic Z-scheme heterojunction (CdS-COF-Ni) is constructed by in-situ growth of CdS nanosheets on the porphyrin-based covalent organic framework with nickel ions (COF-Ni) in the porphyrin centers. A built-in electric field is formed at the interface, which accelerates the separation and transfer of photogenerated charges. Moreover, through the surface protonation treatment in ascorbic acid (AC) solution, the hydrophilicity of the obtained composite is obviously increased and facilitates the transport of water molecules to the photocatalytic centers. Under the synergistic effect of the interfacial interaction and surface protonation treatment, the photocatalytic hydrogen production rate is optimized to be 18.23 mmol h−1 g−1 without adding any cocatalysts, which is 21 times that of CdS. After a series of photoelectrochemical measurements, in situ X-ray photoelectron spectroscopy (XPS) analysis, and density functional theory (DFT) calculations, it is found that the photocatalytic charge transfer pathway conforms to the Z-scheme mechanism, which not only greatly accelerates the separation and transfer of photogenerated charges, but also retains a high reduction capacity for water splitting. This work offers a good strategy for constructing highly efficient organic–inorganic heterojunctions for water splitting.

Stepwise Protonation of Three-Dimensional Covalent Organic Frameworks for Enhancing Hydrogen Peroxide Photosynthesis.

Three-dimensional covalent organic frameworks (3D COFs), recognized for their tailorable structures and accessible active sites, offer a promising platform for developing advanced photocatalysts. However, the difficulty in the synthesis and functionalization of 3D COFs hinders their further development. In this study, we present a series of 3D-bcu-COFs with 8 connected porphyrin units linked by linear linkers through imine bonds as a versatile platform for photocatalyst design. The photoresponse of 3D-bcu-COFs was initially modulated by functionalizing linear linkers with benzo-thiadiazole or benzo-selenadiazole groups. Furthermore, taking advantage of the well-exposed porphyrin and imine sites in 3D-bcu-COFs, their photocatalytic activity was optimized by stepwise protonation of imine bonds and porphyrin centers. The dual protonated COF with benzo-selenadiazole groups exhibited enhanced charge separation, leading to an increased photocatalytic H2O2 production under visible light. This enhancement demonstrates the combined benefits of linker functionalization and stepwise protonation on photocatalytic efficiency.

Stepwise Protonation of Three‐Dimensional Covalent Organic Frameworks for Enhancing Hydrogen Peroxide Photosynthesis

AbstractThree‐dimensional covalent organic frameworks (3D COFs), recognized for their tailorable structures and accessible active sites, offer a promising platform for developing advanced photocatalysts. However, the difficulty in the synthesis and functionalization of 3D COFs hinders their further development. In this study, we present a series of 3D‐bcu‐COFs with 8 connected porphyrin units linked by linear linkers through imine bonds as a versatile platform for photocatalyst design. The photoresponse of 3D‐bcu‐COFs was initially modulated by functionalizing linear linkers with benzo‐thiadiazole or benzo‐selenadiazole groups. Furthermore, taking advantage of the well‐exposed porphyrin and imine sites in 3D‐bcu‐COFs, their photocatalytic activity was optimized by stepwise protonation of imine bonds and porphyrin centers. The dual protonated COF with benzo‐selenadiazole groups exhibited enhanced charge separation, leading to an increased photocatalytic H2O2 production under visible light. This enhancement demonstrates the combined benefits of linker functionalization and stepwise protonation on photocatalytic efficiency.

Unprecedented POSS-Linked 3D Covalent Organic Frameworks with 2-Fold Interpenetrated scu or sqc Topology Regulated by Porphyrin Center for Photocatalytic CO2 Reduction.

The synthesis and characterization of porphyrin center regulated three-dimensional covalent organic frameworks (COFs) with 2-fold interpenetrated scu or sqc topology have been investigated. These COFs exhibit unique structural features and properties, making them promising candidates for photocatalytic applications in CO2 reduction and artemisinin synthesis. The porphyrin center serves as an anchor for metal ions, allowing precise control over structures and functions of the frameworks. Furthermore, the metal coordination within the framework imparts desirable catalytic properties, enabling their potential use in photocatalytic reactions. Overall, these porphyrin center regulated metal-controlled COFs offer exciting opportunities for the development of advanced materials with tailored functionalities.

Unprecedented POSS‐Linked 3D Covalent Organic Frameworks with 2‐Fold Interpenetrated scu or sqc Topology Regulated by Porphyrin Center for Photocatalytic CO2 Reduction

AbstractThe synthesis and characterization of porphyrin center regulated three‐dimensional covalent organic frameworks (COFs) with 2‐fold interpenetrated scu or sqc topology have been investigated. These COFs exhibit unique structural features and properties, making them promising candidates for photocatalytic applications in CO2 reduction and artemisinin synthesis. The porphyrin center serves as an anchor for metal ions, allowing precise control over structures and functions of the frameworks. Furthermore, the metal coordination within the framework imparts desirable catalytic properties, enabling their potential use in photocatalytic reactions. Overall, these porphyrin center regulated metal‐controlled COFs offer exciting opportunities for the development of advanced materials with tailored functionalities.

Tuning Intramolecular Charge Transfer in Antimony(V) Porphyrin through Axial Fluorination.

Modulation of intramolecular charge transfer (ICT) has been tested in two antimony(V) porphyrins, SbT(DMP)P(OMe)2·PF6 and SbT(DMP)P(OTFE)2·PF6, where the meso-positions are occupied by 3,5-dimethoxyphenyl (DMP), and the axial positions are linked with either methoxy (OMe) or trifluoroethoxy (OTFE) units, respectively. The presence of the Sb(+5) ion makes the porphyrin center electron poor. Under this situation, placing electron-rich units in the meso-position creates a condition for push-pull type ICT in the SbT(DMP)P(OMe)2·PF6. Remarkably, it is shown that the ICT character can be further enhanced in SbT(DMP)P(OTFE)2·PF6 with the help of electron-withdrawing TFE units in the axial position, which makes the porphyrin center even more electron scarce. The steady-state and transient studies as well as solvatochromism studies establish the ICT in SbT(DMP)P(OMe)2·PF6 and SbT(DMP)P(OTFE)2·PF6, and the strength of the ICT can be modulated by exploiting the structural properties of antimony(V) porphyrin. The existence of ICT is further supported by density functional theory calculations. The transient studies show that upon excitation of these porphyrin, their charge-transfer states convert to a full charger-separated states with appreciable lifetimes.

Giant Star-shaped meso-substituted Fluorescent Porphyrins with Fluorenyl-containing Arms Designed for Two-photon Oxygen Photosensitization.

In the continuation of previous studies on carbon-rich meso-tetraarylporphyrins featuring 2,7-fluorene units at their periphery, the effect of changing the peripheral dendritic arms for linear arms on their oxygen-photosensitizing ability, their fluorescence and their two-photon absorption (2PA) properties is now analyzed. Thus, starburst porphyrins possessing up to twenty conjugated fluorenyl units were isolated and studied. More precisely, a series of five new free-base porphyrins featuring fully conjugated arms incorporating an increasing number of fluorenyl groups connected via 1,2-alkenyl spacers were synthesized, along with their Zn(II) complexes. Upon excitation in the arm-centred π-π* absorption band, an efficient energy transfer takes place from the peripheral fluorenyl units to the central porphyrin core, leading to intense red-light emission and oxygen photosensitization by the latter. More interestingly, while the linear optical properties of these porphyrins were only slightly improved compared to those of their dendrimer analogues for photodynamic therapy (PDT) or fluorescence imaging, their 2PA cross-sections were much more significantly boosted, evidencing the key role played by different structures on nonlinear optical properties. Finally, by comparison with other porphyrin-based two-photon photosensitizers reported in the literature, we show that these new "semi-disconnected" starburst systems exhibit a remarkable trade-off between intrinsic 2PA, fluorescence and oxygen photosensitization.

Single-atom Pd anchored in the porphyrin-center of ultrathin 2D-MOFs as the active center to enhance photocatalytic hydrogen-evolution and NO-removal

Single-atom catalysts were widely used to treat atmospheric pollution and alleviate energy crises through photocatalysis. However, how to prevent the aggregation of single atoms during the preparation and catalytic processes remained a great challenge. Herein, a novel ultrathin two-dimensional porphyrin-based single-atom photocatalyst Ti-MOF (abbreviated as TMPd) obtained through a simple hydrothermal synthesis strategy was used for photocatalytic hydrogen evolution and NO removal, in which the single-atom Pd tightly anchored in the center of porphyrin to ensure single-atom Pd stable existence. Compared with most reported MOFs-based photocatalysts, the TMPd showed an excellent hydrogen evolution rate (1.32 mmol g−1 h−1) and the NO removal efficiency (62%) under visible light irradiation. Aberration-corrected high-angle annular dark-field scanning transmission electron microscope (HAADF-STEM) and synchrotron-radiation-based X-ray absorption fine-structure spectroscopy (XAFS) proved that pd in TMPd existed in an isolated state, and the atomic force microscope (AFM) proved the ultrathin morphology of TMPd. DFT calculations had demonstrated that single-atom Pd could serve as the active center and more effectively achieve electron transfer, indicating that single-atom Pd played a vital role in photocatalytic hydrogen evolution. In addition, a possible photocatalytic pathway of NO removal was proposed based on ESR and in-situ infrared spectra, in which the catalysts anchored with single-atom Pd could produce more active substances and more effectively oxidize NO to NO2− or NO3−. The results suggested that coordinating single-atom metal species as the active site in the center of porphyrin could be a feasible strategy to obtain various ultrathin porphyrin-based single-atom photocatalysts to acquire excellent photocatalytic performance further.

C60-based Multivalent Glycoporphyrins Inhibit SARS-CoV-2 Specific Interaction with the DC-SIGN Transmembrane Receptor.

Since WHO has declared the COVID-19 outbreak a global pandemic, nearly seven million deaths have been reported. This efficient spread of Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) is facilitated by the ability of the spike glycoprotein to bind multiple cell membrane receptors. Although ACE2 is identified as the main receptor for SARS-CoV-2, other receptors could play a role in viral entry. Among others, C-type lectins such as DC-SIGN are identified as efficient trans-receptor for SARS-CoV-2 infection, so the use of glycomimetics to inhibit the infection through the DC-SIGN blockade is an encouraging approach. In this regard, multivalent nanostructures based on glycosylated [60]fullerenes linked to a central porphyrin scaffold have been designed and tested against DC-SIGN-mediated SARS-CoV-2 infection. First results show an outstanding inhibition of the trans-infection up to 90%. In addition, a deeper understanding of nanostructure-receptor binding is achieved through microscopy techniques, high-resolution NMR experiments, Quartz Crystal Microbalance experiments, and molecular dynamic simulations.

Enforcing Local DNA Kinks by Sequence-Selective Trisintercalating Oligopeptides of a Tricationic Porphyrin: A Polarizable Molecular Dynamics Study.

Bisacridinyl-bisarginyl porphyrin (BABAP) is a trisintercalating derivative of a tricationic porphyrin, formerly designed and synthesized in order to selectively target and photosensitize the ten-base pair palindromic sequence d(CGGGCGCCCG)2 . We resorted to the previously derived (Far et al., 2004) lowest energy-minimized (EM) structure of the BABAP complex with this sequence as a starting point. We performed polarizable molecular dynamics (MD) on this complex. It showed, over a 150 ns duration, the persistent binding of the Arg side-chain on each BABAP arm to the two G bases upstream from the central porphyrin intercalation site. We subsequently performed progressive shortenings of the connector chain linking the Arg-Gly backbone to the acridine, from n=6 methylenes to 4, followed by removal of the Gly backbone and further connector shortenings, from n=4 to n=1. These resulted into progressive deformations ('kinks') of the DNA backbone. In its most accented kinked structure, the DNA backbone was found to have a close overlap with that of DNA bound to Cre recombinase, with, at the level of one acridine intercalation site, negative roll and positive tilt values consistent with those experimentally found for this DNA at its own kinked dinucleotide sequence. Thus, in addition to their photosensitizing properties, some BABAP derivatives could induce sequence-selective, controlled DNA deformations, which are targets for cleavage by endonucleases or for repair enzymes.

Employing Noble Metal-Porphyrins to Engineer Robust and Highly Active Single-Atom Nanozymes for Targeted Catalytic Therapy in Nasopharyngeal Carcinoma.

Single-atom nanozymes (SANzymes) emerge as promising alternatives to conventional enzymes. However, chemical instability limits their application. Here, a systematic synthesis of highly active and stable SANzymes is presented by leveraging noble metal-porphyrins. Four noble metal-porphyrins are successfully synthesized to mimic the active site of natural peroxidases through atomic metal-N coordination anchored to the porphyrin center. These noble metal-porphyrins are integrated into a stable and biocompatible Zr-based metal-organic framework (MxP, x denoting Ir, Ru, Pt, and Pd). Among these, MIrP demonstrates superior peroxidase-like activity (685.61 U mg-1 ), catalytic efficiency, and selectivity compared to horseradish peroxidase (267.71 U mg-1 ). Mechanistic investigations unveil heightened catalytic activity of MIrP arises from its robust H2 O2 adsorption capacity, unique rate-determining step, and low energy threshold. Crucially, MIrP exhibits remarkable chemical stability under both room temperature and high H2 O2 concentrations. Further, through modification with (-)-Epigallocatechin-3-Gallate, a natural ligand for Epstein-Barr virus (EBV)-encoded latent membrane protein 1, targeted SANzyme (MIrPHE) tailored for EBV-associated nasopharyngeal carcinoma is engineered. This study not only presents an innovative strategy for augmenting the catalytic activity and chemical stability of SANzymes but also highlights the substantial potential of MIrP as a potent nanomedicine for targeted catalytic tumor therapy.

Pt loaded porphyrin-functionalized polysulfone membrane for visible-light driven H2 evolution

Photocatalytic hydrogen production has been described as a promising way to obtain green hydrogen energy. Effective proton reduction sites were added to the photocatalyst's surface in order to significantly increase the photocatalytic performance. Herein, Pt atoms were anchored onto porphyrin grafted polysulfone (THPP-g-PSf) membrane by the impregnation-photoreduction method, which was marked as Pt@THPP-g-PSf. Fourier transform infrared (FT-IR), ultraviolet-visible (UV–vis), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and fluorescence spectroscopy were used to systematically characterize the successful preparation of Pt@THPP-g-PSf. The results show that Pt atoms have been successfully loaded into the center of porphyrin on the membrane surface. Furthermore, the performance of the Pt@THPP-g-PSf membrane for the visible light-induced splitting of water to hydrogen was studied. It is found that the hydrogen production rate of Pt@THPP-g-PSf can reach 5.7 mmol·m−2·h−1, which is two times of that of the THPP-g-PSf membrane. In addition, the electron transfer mechanism of photocatalytic hydrogen production was further investigated by time-resolved specify. The results showed that the anchored Pt atoms can facilitate the electron-hole pair (e−/h+) separation, thus improving the photocatalytic activity. This work provides a facile method to construct Pt supported porphyrin functionalized PSf membrane for visible-light induced hydrogen production.

Rational design of bimetallic sites in covalent organic frameworks for efficient photocatalytic oxidative coupling of amines

The conversion of organic compounds by photocatalysis under mild conditions is an environment-friendly alternative for organic transformations. In this work, the bimetallic covalent organic framework coordinated by Sr2+ and Fe2+ in the porphyrin centers with molar ratio of 2:1 (COF-Sr2Fe1) was synthesized through a two-step reaction. Under the synergistic regulation of Sr2+ and Fe2+, the separation of photogenerated charges and visible light absorption for COF-Sr2Fe1 were significantly promoted, and thus COF-Sr2Fe1 exhibited efficient photocatalytic performance towards benzylamine oxidative coupling reaction with a yield of 97 %, much higher than that of the nonmetallic covalent organic framework COF-366. Moreover, it was found that the Fe site displayed higher dehydrogenation ability and the Sr site displayed higher CN coupling ability through the density functional theory (DFT) calculations, thereby making the dehydrogenation and CN coupling steps more controllable for benzylamine oxidative coupling reaction by COF-Sr2Fe1. This work provides a strategy for designing efficient covalent organic frameworks photocatalysts, and helps to understand the oxidative coupling of amines more deeply.

Tetraphenylporphyrin-based Chelating Ligand Additive as a Molecular Sieving Interfacial Barrier toward Durable Aqueous Zinc Metal Batteries.

The sustained water consumption and uncontrollable dendrite growth strongly hamper the practical applications of rechargeable zinc (Zn) metal batteries (ZMBs). Herein, for the first time, we demonstrate that trace amount of chelate ligand additive can serve as a "molecular sieve-like" interfacial barrier and achieve highly efficient Zn plating/stripping. As verified by theoretical modeling and experimental investigations, the benzenesulfonic acid groups on the additive molecular not only facilitates its water solubility and selective adsorption on the Zn anode, but also effectively accelerates the de-solvation kinetics of Zn2+ . Meanwhile, the central porphyrin ring on the chelate ligand effectively expels free water molecules from Zn2+ via chemical binding against hydrogen evolution, and reversibly releases the captured Zn2+ to endow a dendrite-free Zn deposition. By virtue of this non-consumable additive, high average Zn plating/stripping efficiency of 99.7 % over 2100 cycles together with extended lifespan and suppressed water decomposition in the Zn||MnO2 full battery were achieved, thus opening a new avenue for developing highly durable ZMBs.

Tetraphenylporphyrin‐based Chelating Ligand Additive as a Molecular Sieving Interfacial Barrier toward Durable Aqueous Zinc Metal Batteries

AbstractThe sustained water consumption and uncontrollable dendrite growth strongly hamper the practical applications of rechargeable zinc (Zn) metal batteries (ZMBs). Herein, for the first time, we demonstrate that trace amount of chelate ligand additive can serve as a “molecular sieve‐like” interfacial barrier and achieve highly efficient Zn plating/stripping. As verified by theoretical modeling and experimental investigations, the benzenesulfonic acid groups on the additive molecular not only facilitates its water solubility and selective adsorption on the Zn anode, but also effectively accelerates the de‐solvation kinetics of Zn2+. Meanwhile, the central porphyrin ring on the chelate ligand effectively expels free water molecules from Zn2+ via chemical binding against hydrogen evolution, and reversibly releases the captured Zn2+ to endow a dendrite‐free Zn deposition. By virtue of this non‐consumable additive, high average Zn plating/stripping efficiency of 99.7 % over 2100 cycles together with extended lifespan and suppressed water decomposition in the Zn||MnO2 full battery were achieved, thus opening a new avenue for developing highly durable ZMBs.

Meso-Meso and β-Meso Imine-Bridged Thien-2-yl Porphyrin Dyads: Synthesis, Spectral and Electrochemical Investigations

Imine-bridged meso-meso and β-meso unsymmetrical thien-2-yl porphyrin dyads were synthesized by condensation of meso- and β-formyl derivatives of 5,10,15,20-tetrakis(3-methylthien-2-yl)porphyrinato nickel (II), Ni3MeThP with 5-(5-Aminothien-2-yl)-10,15,20-triphenylporphyrinato nickel(II), Ni5AThPP in the presence of lanthanum(III)triflate catalyst in toluene at 120 °C for 8 h. The structural, photophysical, and redox properties were investigated by 1H NMR, UV/Vis spectral, and electrochemical analysis. The near coplanarity of the linker thien-2-yl group with the central porphyrin π-system, which can influence the electron delocalization of these molecules, is explained using electronic spectroscopy and cyclic voltammetry. The stronger electronic interaction between the two porphyrin units and the increased nonplanarity of the macrocycle brought about by the β-meso imine bridging is indicated by the larger shift of redox potentials in the dyad-2 as compared to the dyad-1 system. The results of the present investigation reveal that the two distinct porphyrin units in dyads interact via their near planar thien-2-yl linker.

Push-Pull Charge Transfer and High-Potentials Induced by Hypervalent Ions in Antimony(V) and Phosphorus(V) Porphyrins

When main-group element phosphorus(V) or antimony(V) is inserted into the porphyrin cavity, the resulting phosphorus(V) porphyrin or antimony(V) porphyrin acquires several unique properties: (i) it remains as an excellent photosensitizer, (ii) introduces two chemically active axial bonds orthogonal to the plane of the porphyrin, (iii) attains strong oxidizing potentials, and (iv) induces a push-pull type intramolecular charge transfer. Our recent research has been focused on the latter two properties. The high oxidation number of the phosphorus and antimony ions makes the porphyrin central ring electron deficient. The presence of meso-substitutions (R) with moderate to high electron densities is sufficient to induce a push-pull type intramolecular electron transfer from peripheral aryl units to the central porphyrin ring. By varying the electron richness of the R unit, it is possible to modulate the charge transfer character. Steady-state and transient absorption studies were employed to establish the push-pull intramolecular charge transfer. Here, I will present some hypervalent porphyrins and discuss their structural, redox, and photophysical properties. Figure 1