Cementless Total Hip Arthroplasty Research Articles

Coxa valga and antetorta configuration leads to underestimation of the femoral component size: a matched case-control study of patients undergoing cementless total hip arthroplasty.

Total hip arthroplasty (THA) is the gold standard procedure for patients with end-stage osteoarthritis after failed conservative therapy. Digital templating is commonly employed in preoperative preparation for THA and contributes positively to its outcome. However, the impact of coxa valga and antetorta (CVA) configurations on stem size prediction accuracy remains not reported. Previous studies demonstrated that the size of the lesser trochanter (LT) can be used to determine femoral anteversion on pelvis radiographs. This study investigates the accuracy of preoperative digital templating in predicting stem size in patients with CVA undergoing cementless THA. Preoperative radiographs of 620 patients undergoing cementless THA were retrospectively investigated. Radiographs were standardized with patients standing and the leg internally rotated by 15°. A CVA group was established including patients with a CCD angle greater than 140° and a lesser trochanter (LT) size of at least 10mm for men and 8mm for women. For the control group, radiographs with a CCD angle ranging from 125-135° and LT size 3-10mm for men and 3-8mm for women were selected. Preoperative templating was performed using mediCAD. To reduce confounding factors, case-control matching was carried out for BMI and body height. After case-control matching, a total of thirty-one matches were analyzed. Stem size was underestimated in 74% (23/31) in the CVA and 13% (4/31) in the control group (p < 0.001). Moreover, patients with CVA were more likely to be underestimated by two sizes compared to controls (p < 0.004). In contrast, the exact stem size was predicted more frequently in the control group (p < 0.001). Stem size in patients with a CVA configuration are at high risk of being underestimated when using digital templating. These findings can be valuable for guiding in intraoperative decisions and lowering the risk of complications associated with an undersized femoral component.

The cementless taper wedge vs. fit-and-fill stem in primary total hip arthroplasty: risk of stem-related complication differs across Dorr types.

The choice between a cementless taper wedge stem and a fit-and-fill stem in total Hip arthroplasty (THA) for various proximal femoral morphological types has not been thoroughly evaluated. This study aimed to compare the risk of stem-related complications between these two stem types in Dorr type A, B, and C femurs. From January 2015 through April 2021, we retrospectively reviewed 1995 cementless THA procedures. We stratified all procedures into three groups: Dorr type A (N = 360, 18.0%), B (N = 1489, 74.7%) and C (N = 146, 7.3%). The primary outcome domain was stem-related complications, including stem subsidence ≥ 3mm, intraoperative fracture, periprosthetic fracture and aseptic stem loosening. We performed multivariate regression analysis to compare the risk of stem-related complication between the two stem types. Other factors included age, sex, body mass index, diagnosis, age-adjusted Charlson comorbidity index, stem alignment and canal fill ratio. The incidence of stem-related complications in the taper wedge and fit-and-fill stem groups was 4.4% (N = 15) and 6.5% (N = 107), respectively. Fit-and-fill stems showed an increased risk of stem-related complications (aOR: 9.903, 95% CI: 1.567-62.597) only in Dorr type C femurs. No significant difference in risk was observed in Dorr type A and B femurs. Furthermore, the canal fill ratio at the lesser trochanter, 2cm and 7cm below the lesser trochanter, did not exhibit an association with stem-related complications in any Dorr type. Concerning the risk of stem-related complications, the taper wedge stem was a better choice in Dorr type C femurs. However, there was no difference in risk between the taper wedge stem and fit-and-fill stem in Dorr type A and B femurs.

Preventing Loss of Femoral Periprosthetic Bone Mineral Density in Cementless Total Hip Arthroplasty Using a Tapered Wedge Stem: A Retrospective, Cohort Study in Osteoporotic Patients Treated with Denosumab.

Purpose: Bone quality is an important issue in elderly osteoporotic patients who undergo total hip arthroplasty (THA) because periprosthetic fracture or aseptic loosening of implant caused by periprosthetic bone loss is a serious concern. Denosumab has been approved for osteoporosis patients. Thus, the purpose of this study was to investigate whether denosumab prevents loss of proximal femoral periprosthetic bone mineral density (BMD) in cementless THA using a tapered wedge stem in patients with osteoporosis. Methods: Seventy consecutive patients who had undergone primary THA were included in this study. Twenty-seven patients who received denosumab for osteoporosis formed the denosumab group, and 43 patients without denosumab formed the control group. Bone turnover markers and femoral periprosthetic BMD were measured at two weeks, six months, and 12 months after THA. BMD was evaluated in seven regions of interest according to the zones of Gruen. Results: BMD in zone 1 was significantly increased from baseline at both six and 12 months after THA in the denosumab group (10.0±10.2%, p<0.001 and 13.1±12.7%, p<0.001, respectively) and significantly decreased in the control group (-3.6±9.7%, p<0.05, and -5.9±9.4%, p<0.001, respectively). BMD in zone 7 was significantly decreased compared to baseline at both six and 12 months after THA in the control group (-19.2±20.2%, p<0.001 and -22.3±16.8%, p<0.001, respectively) but not in the denosumab group (-0.7±18.5% and -1.1±16.6%, respectively). The use of denosumab for THA patients with osteoporosis was independently related to preventing loss of periprosthetic BMD of the femur at 12 months after surgery in zones 1 (p<0.001) and 7 (p<0.001) on multivariate analysis. Conclusions: Denosumab significantly increased proximal femoral periprosthetic BMD in zone 1 and prevented loss of BMD in zone 7 in patients with osteoporosis after cementless THA using a tapered wedge stem at both seven and 12 months. Future studies of denosumab treatment following THA in patients with osteoporosis should focus on clinical outcomes such as the risk of periprosthetic fracture and revision THA.

Clinical effects of combined anteversion and offset on postoperative dislocation in total hip arthroplasty

BackgroundImplant impingement and soft tissue tension are factors involved in dislocation after total hip arthroplasty (THA). Combined anteversion (CA) has been used as an indicator for implant placement. However, optimal implant placement remains a challenge. Moreover, the effect of changes in offset on dislocation is still unclear. In this study, we aimed to clarify the effects of postoperative CA and pre- and postoperative changes in offset on dislocation.MethodsIncluded were patients who underwent primary cementless THA between 2013 and 2020. The mean values of CA and offset in the dislocation and non-dislocation groups were compared. The CA values within ± 10% of the recommended values were defined as good CA, and those outside the range were rated as poor CA. The dislocation rates were compared between the good and poor CA groups and between the groups with and without increased offset.ResultsA total of 283 hips were included. The mean values of CA in the dislocation and non-dislocation groups were significantly different (P < 0.05). The dislocation rate was significantly lower in the good CA group (P < 0.05). The dislocation rates in the groups with and without increased total offset were 0.5% and 4.3%, respectively (P = 0.004). There were no dislocations in patients with good CA and increased offset.ConclusionsThe dislocation rate was significantly lower when implants were placed within ± 10% of the recommended CA value. Our results suggest that dislocation can be avoided by placing the implant in the good CA range and considering the increase in total offset on the operative side.

Collared Cementless Femoral Components Reduce the Revision Rates in Primary Total Hip Arthroplasty Using the Direct Anterior Approach: An Australian Orthopaedic Association National Joint Replacement Registry Study

BackgroundAn increased risk of periprosthetic fracture and aseptic loosening is reported when the direct anterior approach (DAA) is used for total hip arthroplasty (THA), especially with cementless implants. We assessed the rate of revision comparing collared and collarless femoral stems when using the DAA for THA. MethodsWe used data from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) for primary THA for osteoarthritis inserted with the DAA between January 2015 and December 2022. There were 48,567 THAs that used the DAA (26,690 collarless cementless, 10,161 collared cementless, and 11,716 cemented). Cumulative percent revision (CPR) was calculated for all-cause revision, revision for periprosthetic femoral fractures, and aseptic femoral stem loosening. Cox proportional hazard ratios were used to compare the revision of collared and collarless cementless stems. We also compared collared cementless stems and cemented stems. ResultsA higher rate of all-cause revision within three months of surgery was observed with collarless compared to collared cementless implants (HR [hazard ratio]: 1.99 [95% CI (confidence interval), 1.56 to 2.54]; P < 0.001). Similarly, collarless cementless implants were associated with a greater rate of revision for fracture in the first six months (HR: 2.90 [95% CI, 1.89 to 4.45]; P < 0.001) and after 6 months (HR 10.04 [95% CI 1.38 to 73.21]; P = 0.02), as well as an increased rate of revision for aseptic loosening after two years (HR: 5.76 [95% CI, 1.81 to 18.28], P = 0.003). Collared cementless and cemented stems performed similarly. ConclusionCollared stems were associated with a reduced rate of all-cause revision for cementless THA performed via the DAA. The reduction in risk may be due to protection from periprosthetic femoral fracture and aseptic loosening.

Biomechanical Comparison of Impaction Techniques and Cross-Sectional Femoral Stem Shapes for Cementless Total Hip Arthroplasty.

Traditional mallet broaching and stem seating in cementless total hip arthroplasty (THA) can result in femoral stem misalignment, potentially reducing implant longevity. This study aimed to compare the pullout strength of cementless THA femoral stems with different cross-sectional designs achieved through the powered impactor method versus the traditional mallet method. The authors utilized 24 polyurethane foam femurs and two femoral bone preservation stems with different proximal cross-sectional shapes (double taper: ACTIS®, size 5; flat taper: TRI-LOCK®, size 5). A single orthopedic surgeon broached each femur from size 0 to size 5 using either the powered impactor or mallet impaction methods. Broaching time and component implantation times were recorded. A load-to-failure pullout strength test was conducted, and the ultimate pullout load was recorded. The broaching time for the TRI-LOCK® stem showed a statistically significant difference between the two impaction methods (powered: 37±7 seconds, mallet: 75±29 seconds, F[3, 20] = 4.56, p = 0.002), but no statistically significant difference was detected for the ACTIS® stem between the two impaction methods (powered: 47±22 seconds, mallet: 59±9 seconds, F[3, 20] = 4.56, p = 0.304). There was a statistically significant difference in pullout strength between the two impaction groups, and this strength was influenced by the implant cross-sectional shape (ACTIS®: 774±75N versus 679±22N, F(3,20) = 16.38, p = 0.018; TRI-LOCK®: 616±57N versus 859±85N, F(3, 20) = 16.38, p <0.001). The technique used for femoral bone preparation (powered impactor versus mallet) and the cross-sectional design of the cementless femoral stem are crucial factors that affect initial stem stability and operation time.

Cementless Total Hip Arthroplasty With Paavilainen Femoral Shortening Osteotomy Can Provide Good Results at 10 Years in Patients Who Have Crowe IV Developmental Dysplasia of the Hip

BackgroundThe aim of this study was to present the clinical and radiologic results of primary total hip arthroplasty (THA) using the femoral shortening osteotomy technique described by Paavilainen in patients who have Crowe IV developmental dysplasia of the hip. MethodsWe retrospectively analyzed the results of primary THA using the Paavilainen technique in 335 hips. The mean follow-up was 10.2 years. The degree of limp, leg-length discrepancy, and patient satisfaction were assessed. The Oxford Hip Score was used to examine functional outcomes. A number of radiographic parameters were also assessed. ResultsThe most common reason for revision surgery was nonunion of the distally advanced greater trochanter. This complication was observed in 22 hips (6.5%). The 10-year survival for acetabular components, it was 97.3%, and for femoral components was 98.7% with aseptic loosening as the end point, and 85.9% with reoperation for any reason as the end point. Patients demonstrated improved functional outcomes. The mean limb lengthening was 27.8 mm. Nonunion was more common if the contact length of the proximal femoral fragment with the lateral surface of the distal femoral fragment was less than 35 mm. ConclusionsCementless primary THA using the femoral shortening osteotomy technique described by Paavilainen in patients who have Crowe IV dysplasia of the hip demonstrates good clinical and radiologic postoperative results. If the contact between the fragments after osteotomy is less than 35 mm, there is a high risk of nonunion, and supplemental fixation may be warranted.

Accuracy of cup placement and pelvic motion in total hip arthroplasty in the lateral decubitus position using a new computed tomography-based navigation system with augmented reality technology.

This study aimed to investigate the accuracy of cup position and assess the changes in pelvic tilt during primary total hip arthroplasty (THA) in the lateral decubitus position using a new computed tomography (CT)-based navigation system with augmented reality (AR) technology. There were 37 cementless THAs performed using a CT-based navigation system with AR technology in the lateral decubitus position and 63 cementless THAs performed using manual implant techniques in the lateral decubitus position in this retrospective study. Postoperative cup radiographic inclination and anteversion were measured using postoperative CT, and the proportion of hips within Lewinnek's safe zone was analyzed and compared between the two groups. The mean absolute values of navigation error were assessed. Intraoperative pelvic tilt angles were also recorded using navigation system. The percentage of cups inside Lewinnek's safe zone was 100% in the navigation group and 35% in the control group (p < 0.001). The mean absolute values of navigation error in inclination and anteversion were 2.9° ± 2.1° and 3.3° ± 2.4°, respectively. The mean abduction angle of the pelvis was 5.1° ± 4.8° after placing the patients in the lateral decubitus position and 4.1° ± 6.0° after cup placement. The mean posterior tilt angle was 6.8° ± 5.1° after placing the patients in the lateral decubitus position and 9.3° ± 5.9° after cup placement. The mean internal rotation angle was 14.8° ± 7.4° after cup placement. There were no correlations between the navigation error in inclination or anteversion and the absolute values of changes of the pelvic tilt angle at any phase. Although progressive pelvic motion occurred in THA in the lateral decubitus position, especially during cup placement, the CT-based navigation system with AR technology improved cup placement accuracy.

Evaluation of Outcome after Total Hip Arthroplasty for Femoral Neck Fracture: Which Factors Are Relevant for Better Results?

Background: Femoral neck fractures (FNFs) are frequent orthopedic injuries in elderly patients. Despite improvements in clinical monitoring and advances in surgical procedures, 1-year mortality remains between 15% and 30%. The aim of this study is to identify variables that lead to better outcomes in patients treated with total hip arthroplasty (THA) for FNFs. Methods: All patients who underwent cementless THA for FNF from January 2018 to December 2022 were identified. Patients aged more than 80 years old and with other post-traumatic lesions were excluded. Patient data and demographic characteristics were collected. The following data were also registered: time trauma/surgery, surgical approach, operative time, intraoperative complications, surgeon arthroplasty-trained or not, and anesthesia type. In order to search for any predictive factors of better short- and long-term outcomes, we performed different logistic regression analyses. Results: A total of 92 patients were included. From multivariable logistic regression models, we derived that a direct anterior surgical approach and an American Society of Anesthesiologists (ASA) classification < 3 can predict improved short-term outcomes. Moreover, THAs performed by surgeons with specific training in arthroplasty have a lower probability of revision at 1 year. Mortality at 1 year was ultimately influenced by the ASA classification. Conclusions: A direct anterior approach and specific arthroplasty training of the surgeon appear to be able to improve the short- and long-term follow-up of THA after FNF.

Optimizing Implant Selection: The Critical Role of Objective and Biomechanical Data in Orthopaedic Decision-Making: Commentary on an article by Gary Hooper, MBChB, MD, FRACS, et al.: "Evaluation of Proximal Femoral Bone Mineral Density in Cementless Total Hip Arthroplasty. A 3-Arm Prospective Randomized Controlled Trial".

Optimizing Implant Selection: The Critical Role of Objective and Biomechanical Data in Orthopaedic Decision-Making: Commentary on an article by Gary Hooper, MBChB, MD, FRACS, et al.: "Evaluation of Proximal Femoral Bone Mineral Density in Cementless Total Hip Arthroplasty. A 3-Arm Prospective Randomized Controlled Trial".

Excellent survival of two anatomically adapted hydroxyapatite coated cementless Total Hip Arthroplasties. A mean follow-up of 11.3 years.

There are many different types of cementless anatomically adapted Total Hip Arthroplasties (THAs) on the market, the Anatomic Benoist Gerard (ABG) I and II are such types of cementless THAs. In this retrospective single-centre study we evaluated the overall survival with revision for any reason and aseptic loosening as endpoint at more than 11 years follow-up. Between 2000 and 2004, 244 cementless THAs were performed in 230 patients in a primary care hospital. At a mean of 11.3 years follow-up (range 9.8 - 12.8 years) clinical examination, plain radiography and Patient Reported Outcome Measures (PROMs) were obtained and analysed. The PROMs consisted of the Oxford Hip Score (OHS) and the Western Ontario and McMaster University Index (WOMAC). At a mean of 11.3 years follow-up 32 patients (13.1%) had died of unrelated causes. Of the remaining cohort all 198 patients (212 THAs) have been reached for evaluation. There were no patients considered as lost to follow-up. At a mean of 11.3 years 11 patients (11 THAs) have had a revision of either the femoral implant or acetabular component resulting in an overall survival of 95.5%. There was no statistically significant difference (p=0.564) in survival between the ABG I and II THAs. Radiographic there were no changes between the ABG I and II last follow up. The ABG II performed statistically significant better in PROMs. We concluded that both anatomically adapted hydroxyapatite coated cementless THAs show excellent survival at more than 11 years follow-up.

High femoral offset as a risk factor for aseptic femoral component loosening in cementless primary total hip arthroplasty

PurposeLateralized stems in primary cementless total hip arthroplasty (THA) showed to be associated with aseptic femoral loosening. However, femoral head length also affects femoral offset but was not considered so far. This study analyzed the impact of high femoral offset (hFO) combinations, formed by lateralized stems or large femoral head lengths, on aseptic femoral component loosening.MethodsRetrospective cohort study was performed including all patients that underwent primary cementless THA at our institution between July 2004 and December 2016. Patients were screened for aseptic femoral component loosening and grouped in aseptic loosening (AL) and non-aseptic loosening (nAL) group. Medical records were screened; implant details were noted and classified in hFO and standard femoral offset (sFO) combinations. Supposed risk factors for aseptic loosening were analyzed.ResultsTwo thousand four hundred fifty-nine THA could be included, containing 14 THA (0.6%) with aseptic femoral component loosening. The AL group contained 11 hFO combinations (78.6%), whereas in the nAL group, 1315 hFO combinations (53.8%) were used. Subgroup analysis showed significant difference between two groups for hFO combinations (p = 0.014), age (p = 0.002), NSAR (p = 0.001), and bilateral THA on same day (p = 0.001). The multiple logistic regression analysis showed that hFO combination was the only variable for increased probability of aseptic loosening (OR, 3.7; p = 0.04).ConclusionHigh femoral offset combinations, formed by lateralized stems or large femoral head lengths in our collective of standard straight stems implanted by an anterior approach, show a 3.7-fold increased probability for aseptic femoral component loosening. Adjustment of the postoperative protocol may be considered in these cases to ensure proper stem ingrowth.

Influence of offset on osseointegration in cementless total hip arthroplasty: A finite element study.

Early aseptic loosening is caused by deficient osteointegration of the femoral stem due to increased micromotions and represents a common mode of failure in uncemented total hip arthroplasty (THA). This study hypothesized that a higher femoral offset, a smaller stem size and obesity increase femoral micromotion, potentially resulting in early aseptic loosening. A finite element analysis was conducted based on computed tomography segmented model of four patients who received a THA with a triple-tapered straight stem (Size 1, 3, 6). The influence of femoral stem offset (short neck, standard, lateral), head length (S to XXL), femoral anteversion and obesity during daily activities of fast walking and stair climbing was analyzed. The micromotions for the femoral stem zones were compared to a threshold representing a value above which only partial osseointegration is expected. The minimum femoral offset configuration compared to the maximum offset configuration (short neck stem, S head vs. lateral stem, XXL head) leads to a relative mean micromotion increase of 24% for the upper stem zone. Increasing the body weight (body mass index 30-35 kg/m2 ) increases the micromotion by 20% for all stem zones. The obese population recorded threshold-exceeding micromotions for stem sizes 1 and 3 for all offset configurations during stair climbing. Higher femoral offset, a smaller stem size, and higher loading due to obesity lead to an increase in micromotion between the prosthesis and proximal femur and represent a risk configuration for impaired osseointegration of a triple-tapered straight stem, especially when these three factors are present simultaneously.

The Outcome of Total Hip Arthroplasty Without Subtrochanteric Shortening Osteotomy in Severe Developmental Dysplasia of the Hip

Background: Total hip arthroplasty (THA) is a surgical technique to correct developmental dysplasia of the hip (DDH). Various THA-based methods have been developed for managing end-stage osteoarthritis in patients with DDH Crowe type III or IV. Objectives: In this study, we evaluate the Harris hip score (HHS) before and after cementless THA without subtrochanteric shortening osteotomy (STO) in patients with DDH Crowe type III or IV who were candidates for THA, as well as complications and the need for revision surgery. Methods: This retrospective cohort study was conducted on patients with DDH Crowe type III and IV, who were candidates for cementless THA using the Watson Jones technique without shortening STO. The HHS was calculated and recorded in their medical files before surgery. Patients with missing or incomplete medical files, without written informed consent, with neurovascular diseases, immunosuppressive drug use, congenital bone and articular anomalies, low back pain radiating to the lower extremities, simultaneous fractures, a history of lower extremity fractures, or joint infections were excluded. The HHS was recalculated during outpatient follow-up. Neurovascular defects and the need for reoperation were also evaluated. All data were recorded and analyzed. Results: Thirty-two patients were enrolled with a mean ± SD age of 50.34 ± 15.45 years, most of whom were women (75%). The patients were followed for 2 to 7 years. Postoperative nerve defects were observed in only 1 (3.1%) patient. Hip reoperation was performed in 1 (3.1%) patient. The mean ± SD of HHS before surgery was 50.10 ± 12.48, which increased significantly to 77.99 ± 15.60 after surgery (P &lt; 0.001). Furthermore, the HHS was evaluated before and after the intervention for each gender, showing a significant increase in both. Conclusions: Cementless THA without shortening osteotomy can improve HHS in patients with DDH Crowe III and IV, providing satisfactory outcomes. Furthermore, complications, such as neurological defects and the need for reoperation, are minimal with this method.

Outcomes Following Intraoperative Calcar Fractures During Cementless Total Hip Arthroplasty

BackgroundIntraoperative calcar fractures (IOCFs) are an established complication of cementless total hip arthroplasty (THA). Prompt recognition and management may prevent subsequent postoperative complications. This study aimed to evaluate the outcomes and revision rates of THAs with IOCFs identified and managed intraoperatively. MethodsThere were 11,438 primary cementless THAs performed at a single institution from 2009 to 2022. Prospectively collected data on cases with an IOCF was compared to cases without the complication. The fracture group had a lower body mass index (26.9 versus 28.9 kg/m2; P = .01). Patient age, sex, and mean follow-up (3.2 (0 to 12.8) versus 3.5 years (0 to 14); P = .45) were similar between groups. ResultsAn IOCF occurred in 62 of 11,438 (0.54%) cases. The THAs done via a direct anterior approach experienced the lowest rate of fractures (31 of 7,505, 0.4%) compared to postero-lateral (27 of 3,759, 0.7%; P = .03) and lateral (4 of 165, 2.4%; P < .01) approaches. Of the IOCFs, 48 of 62 (77%) were managed with cerclage cabling, 4 of 62 (6.5%) with intraoperative stem design change and cabling, 4 of 62 (6.5%) with restricted weight-bearing, and 6 of 62 (9.7%) with no modification to the standard postoperative protocol. The IOCF group experienced one case of postoperative component subsidence. No subjects in the IOCF cohort required revision, and rates were similar between groups (0 of 62, 0% versus 215 of 11,376, 1.9%; P = .63). Postoperative Hip dysfunction and Osteoarthritis Outcome Score for Joint Replacement scores were comparable (85.7 versus 86.4; P = .80). ConclusionsCementless THA complicated by IOCF had similar postoperative revision rates and patient-reported outcome measures at early follow-up when compared to patients not experiencing this complication. Surgeons may use these data to provide postoperative counseling on expectations and outcomes following these rare intraoperative events.

Durability of Primary Total Hip Arthroplasty With Cementless Stems Without a Collar in Elderly Patients Age 75 Years and Over

BackgroundCementless femoral fixation in total hip arthroplasty (THA) has increased in prevalence worldwide. However, cementless fixation in elderly patients is controversial due to the risks of periprosthetic fracture and aseptic loosening. This study evaluated outcomes in patients undergoing primary THA utilizing a cementless stem without a collar, comparing those less than 75 years to those older than 75 years. MethodsBetween 2011 and 2021, there were 2,605 cementless THAs performed by 4 surgeons utilizing a highly porous metal fixation surface without a collar and consistent clinical protocols. There were 469 patients who had an age ≥ 75 years. Revision rates, intraoperative fractures, and 90-day mortality were compared between cohorts. In the ≥ 75 year age group, there were more women, more American Society of Anesthesiologists physical status classification III or IV, a lower body mass index, and more kidney disease, osteoporosis, and thyroid disease (P ≤ .002). ResultsAll-cause revision rates trended lower for the ≥75 year age group compared to < 75 year (1.9 versus 3.5%, P = .082) at 20-months of follow-up. Moreover, there was no difference in all-cause femoral component revisions comparing ≥ 75 to < 75 year age groups (1.5 versus 2.2%, P = .375), with only 3 of 10 femoral revisions due to aseptic loosening being in the ≥ 75 year age group. Intraoperative fracture (0.2 versus 0.5%, P = .701) and 90-day mortality (0.2 versus 0.1%, P = .460) did not differ between ≥ 75 and < 75 year age groups. ConclusionsOlder patients had comparable revision rates compared to younger patients using cementless femoral fixation without a collar. Furthermore, there was no difference in 90-day mortality or intraoperative fracture rates. Study findings provide evidence for the safety and durability of cementless THA using collarless femoral stems in elderly patients ≥ 75 years of age. Level of EvidenceIII.

Insufficient stem antetorsion and lower cup abduction is a combined risk factor for posterior hip dislocation in patients undergoing THA for femoral neck fractures: a retrospective analysis

BackgroundThe role of acetabular and femoral component positions with respect to the risk of post-operative instability and dislocation remains debated. In this study, we aimed to identify potential risk factors for early dislocation following primary total hip arthroplasty (THA) for displaced intracapsular femoral neck fractures (FNF) using radiological measurements.MethodsWe retrospectively analyzed data for patients who underwent cementless primary THA for FNF using a posterolateral approach between January 2018 and December 2021. Follow-up duration, age, sex, affected side, and mean time from THA to dislocation were recorded. Leg-length inequality, abductor lever arm, vertical and horizontal femoral offsets, vertical and horizontal hip centers of rotation, abduction, anteversion of the acetabulum and femoral prosthesis, and combined anteversion were measured.ResultsThe study sample included 17 men and 34 women, with 21 and 30 patients undergoing left- and right-hip operations, respectively. The mean patient age was 70.18 ± 7.64 years, and the mean follow-up duration was 27.73 ± 13.52 months. The mean time between THA and dislocation was 1.58 ± 0.79 months. Seven patients (13.73%) sustained posterior dislocation of the hip. The abduction angle (36.05 ± 6.82° vs. 45.68 ± 8.78°) (p = 0.008) and anteversion of the femoral prosthesis (8.26 ± 4.47° vs. 19.47 ± 9.01°) (p = 0.002) were significantly lower in the dislocation group than in the control group. There were no significant differences in other parameters.ConclusionsInsufficient stem antetorsion combined with lower abduction angle of the acetabular component were associated with a high risk of dislocation, especially in patients with deep flexion or internal rotation of the flexed hip joint and knees, or in patients with a stiff spine or anterior pelvic tilt, impingement may then occur in the neck of the prosthesis and cup component, ultimately resulting in posterior dislocation. These findings could remind surgeons to avoid simultaneous occurrence of both in THA surgery. These results provide new insight into risk factors for hip dislocation in patients undergoing primary THA for FNF and may aid in reducing the risk of instability and dislocation.Level of evidenceProspective comparative study Level II.

Gender differences in cementless short stem total hip arthroplasty: significantly higher femoral lengthening in female patients

Modern cementless short stems in total hip arthroplasty (THA) enable a precise reconstruction of the native pre-arthritic hip geometry. While gender differences have been reported for older generation straight hip stems, there are hardly reports regarding modern cementless short hip stems. Therefore, we aimed to evaluate the influence of gender differences in hip anatomy in cementless short stem THA. A total of 207 patients (109 females, 98 males) with unilateral THA and absence of contralateral joint space narrowing (Kellgren-Lawrence grade ≤ 2) were included. Acetabular height and offset as well as femoral height and offset were measured on pre- and 3-months-postoperative anteroposterior X-rays of the pelvis and compared to the contralateral hip. Additionally, implant position was evaluated on the postoperative radiograph. In male patients, the loss of acetabular offset was significantly greater than in females (p = 0.012), leading to a compensatory increase in femoral offset (p = 0.041). Femoral height discrepancy was significantly higher in females (p < 0.001), accounting for an increased global hip height discrepancy (p < 0.001). The mean acetabular anteversion was significantly greater in female patients (p < 0.001). Female patients are at higher risk of femoral lengthening in THA with a cementless short stem potentially caused by a further proximally conducted femoral neck osteotomy and show significantly higher cup anteversion angles. Therefore, surgeons should take special care to the level of neck resection and implant positioning in female patients.

Variety of femoral anteversion and its measurement in cementless total hip arthroplasty: Does robotic technology improve accuracy?

BackgroundHigh-performance total hip arthroplasty (THA) depends on the accurate position of components. However, femoral anteversion is variable, and current studies only used traditional instruments to evaluate it, such as protractor and spirit level with limited cases. This study aimed to identify the variability in the measured femoral native anteversion and intraoperative stem anteversion under different measurement methods, including intraoperative robotic method. We hypothesized that robotic technology was more accurate than traditional instruments for femoral anteversion evaluation.MethodsThis study included 117 hips of patients who underwent robotic-assisted THA between November 2019 and March 2021. Preoperative native femoral anteversion was measured using a robotic system. Intraoperative femoral stem anteversion was evaluated visually, and then measured with a goniometer and a robotic system, respectively. Variability in the measured femoral native anteversion and intraoperative femoral stem anteversion was calculated and compared. Intraclass correlation coefficient (ICC) and Pearson correlation analysis were used to assess the consistency and correlation of anteversion of different measurements and postoperative CT-measured stem anteversion, respectively.ResultsThe result of measurement for preoperative native femoral anteversion was more variable than the intraoperative robotic-measured stem anteversion. Intraoperative robotic-measured stem version showed the highest correlation with postoperative CT measurement of stem version (r = 0.806, P < 0.001), while intraoperative surgeon estimation had the lowest correlation coefficient (r = 0.281, P = 0.025). As for the consistency with postoperative CT measurement of femoral stem anteversion, the intraoperative robotic-measured femoral stem version also had the highest value (ICC = 0.892, P < 0.001).ConclusionNative femoral anteversion was variable preoperatively. Using cementless stems, anteversion was also highly variable. Robotic assessment for stem anteversion during surgery was more consistent with the final position than the preoperative assessment and conventional intraoperative estimation.

Small design modifications can improve the primary stability of a fully coated tapered wedge hip stem.

Increasing the stem size during surgery is associated with a higher incidence of intraoperative periprosthetic fractures in cementless total hip arthroplasty with fully coated tapered wedge stems, especially in femurs of Dorr type A. If in contrast a stem is implanted and sufficient primary stability is not achieved, such preventing successful osseointegration due to increased micromotions, it may also fail, especially if the stem is undersized. Stem loosening or periprosthetic fractures due to stem subsidence can be the consequence. The adaptation of an established stem design to femurs of Dorr type A by design modifications, which increase the stem width proximally combined with a smaller stem tip and an overall shorter stem, might reduce the risk of distal locking of a proximally inadequately fixed stem and provide increased stability. The aim of this study was to investigate whether such a modified stem design provides improved primary stability without increasing the periprosthetic fracture risk compared to the established stem design. The established (Corail, DePuy Synthes, Warsaw, IN, US) and modified stem designs (Emphasys, DePuy Synthes, Warsaw, IN, US) were implanted in cadaveric femur pairs (n = 6 pairs) using the respective instruments. Broaching and implantation forces were recorded and the contact areas between the prepared cavity and the stem determined. Implanted stems were subjected to two different cyclic loading conditions according to ISO 7206-4 using a material testing machine (1 Hz, 600 cycles @ 80 to 800 N, 600 cycles @ 80 to 1600 N). Translational and rotational relative motions between stem and femur were recorded using digital image correlation. Broaching and implantation forces for the modified stem were up to 40% higher (p = 0.024), achieving a 23% larger contact area between stem and bone (R2 = 0.694, p = 0.039) resulting in a four times lower subsidence during loading (p = 0.028). The slight design modifications showed the desired effect in this in-vitro study resulting in a higher primary stability suggesting a reduced risk of loosening. The higher forces required during the preparation of the cavity with the new broaches and during implantation of the stem could bare an increased risk for intraoperative periprosthetic fractures, which did not occur in this study.