Cellulose Nanofiber Suspension Research Articles

Lightweight and robust cellulose/MXene/polyurethane composite aerogels as personal protective wearable devices for electromagnetic interference shielding

The increasing electromagnetic pollution is urgently needed as an electromagnetic interference shielding protection device for wearable devices. Two-dimensional transition metal carbides and nitrides (MXene), due to their interesting layered structure and high electrical conductivity, are ideal candidates for constructing efficient conductive networks in electromagnetic interference shielding materials. In this work, lightweight and robust cellulose/MXene/polyurethane composite aerogels were prepared by mixing cellulose nanofiber (CNF) suspensions with MXene, followed by freeze-drying and coating with polyurethane. In this process, CNF effectively assembled MXene nanosheets into a conductive network by enhancing the interactions between MXene nanosheets. The prepared aerogel exhibited the shielding effectiveness of 48.59 dB in the X-band and an electrical conductivity of 0.34 S·cm−1. Meanwhile, the composite aerogel also possessed excellent thermal insulation, infrared stealth, mechanical and hydrophobic properties, and can be used as a wearable protective device to protect the human body from injuries in different scenarios while providing electromagnetic interference shielding protection.

Two-dimensional rheo-optical measurement system to study dynamics and structure of complex fluids

Abstract We have developed a novel rheo-optical measurement system based on two-dimensional polarization analysis, which can evaluate the rheological properties and structure of a complex fluid simultaneously. To assess the utility of the system, we used it to investigate the relationship between yield behavior and structural evolution in a TEMPO-oxidized cellulose nanofiber (T-CNF) suspension, which is a yield-stress fluid that has been actively studied in recent years. To analyze the structural evolution of a T-CNF suspension, stress-ramp tests were conducted. A two-step yield behavior was observed, and distributions of retardation and orientation axis varied dramatically with increasing shear stress. In particular, different distributions were observed in the three regions: after the first yield point, before the second yield point, and after the second yield point. In experiments with a low-concentration T-CNF suspension that exhibits no yield behavior, the retardation increased monotonically with increasing shear stress, and its distribution was uniform. It was demonstrated that the yield behavior and related structures can be analyzed from these results. More detailed structural mechanisms require various rheological tests using the developed system. However, the present insights demonstrate the valuable information provided by the developed rheo-optical measurement system, contributing essential knowledge for applications in various fields.

Selection of suitable cellulose nanofibers derived from eco-friendly sources for the production of lightweight cementitious composites with tuned rheological, mechanical, and microstructure properties

Different cellulose nanofibers (CNF) and ordinary Portland cement (OPC) were combined to prepare CNF-OPC composite pastes at different water to cement ratios (W/C) to optimize density, thermal conductivity, and mechanical strength. The rheological data of CNF-OPC composites showed that the viscosity and yield stress of the mixtures were abruptly increased in comparison to those of OPC pastes at equal W/C. Rheological and morphological data showed that the uniformity of the CNF and degree of fiber entanglement plays a significant role in tuning the composite properties. CNF suspensions with short fibers were observed to improve the mechanical properties of the composite while suspensions with entangled fiber networks were found to decrease density and thermal conductivity. Loss of flexural strength of CNF-OPC compared to OPC was found to be to a lesser extent than loss of compressive strength. The dry density and thermal conductivity of the CNF-OPC composites were substantially reduced to the range of 750 (kg/m3) and 0.1 (W/m-1K-1) at W/C = 2. CNF caused a reduction in peak temperature and postponed the hydration peak by more than 2 hours compared to OPC.

Ambient-dried, scalable and biodegradable cellulose nanofibers aerogel for oil-spill cleanup

Aerogels made of surface-modified cellulose nanofibers (CNF) have the potential to be a long-term solution for oil spill cleanup and industrial waste-water treatment, but their use is currently constrained by high preparation costs, lengthy processing times, and use of hazardous chemicals. In this study, a cost-effective and easily scalable cellulose nanofibers aerogel is developed using sugarcane bagasse as the cellulose source. The aqueous suspension of CNF and urea is freeze-thawed and then dried at ambient temperatures to produce CNF aerogels, avoiding the costly and time-consuming freeze-drying or supercritical drying methods. The role of urea in the aerogel structure is investigated using molecular dynamics. The aerogel exhibited an elastic modulus of 1345 KPa and a porosity of 96.9 %. To enhance the hydrophobicity of the surface of these aerogels, they are coated with the biodegradable polymer polycaprolactone (PCL). Further, two molecular weights (MW) PCL 10,000 and 80,000 are used to examine the impact of PCL MW on the performance and biodegradability of aerogel. Moreover, the efficacy of these green modifications is being compared to the conventional silane modifications. The 10,000 MW PCL-modified aerogel demonstrated a water-contact angle measuring 125.5°, an oil sorption capacity of 24 g/g, and exceptional recyclability even after undergoing 20 cycles. Further, after 15 days, the aerogel showed excellent biodegradability.

Synthesis and characterization of cellulose nanofibers from waste paper and their utilization in wood adhesion

AbstractNanocellulose extraction from lignocellulosic materials is a highly chemical and energy‐intensive process as it requires the removal of lignin and hemicellulose. Writing paper is one of the processed materials that could be used as a raw material for the extraction of nanocellulose. In this work, cellulose nanofibers (CNFs) were synthesized from paper waste using TEMPO‐oxidation followed by high‐shear microfluidization. Scanning electron microscopy and atomic force microscopy confirmed the diameter of fibers in the nano‐range and a consistent zeta potential confirmed the stability of CNF suspension in water over a long time frame. Characterization of the CNFs using Fourier transform infrared spectroscopy indicated the presence of a carbonyl group due to the oxidation process. Thermogravimetric analysis and x‐ray diffraction revealed lower thermal stability and reduction in the crystallinity index of CNFs, as compared to pulp fibers. The obtained CNFs were used successfully as the sole binding agent in the preparation of fiberboards and also utilized as a reinforcing agent for polyvinyl acetate (PVAc) adhesive in the preparation of laminated veneer lumber (LVLs). The addition of CNFs in PVAc improved the glue shear strength indicating superior bonding characteristics and also increased the water resistance of the LVLs.Highlights This work focused on cellulose nanofibers (CNFs) extraction from waste paper Obtained CNFs form stable water suspension and have a diameter of less than 15 nm Thermal stability and crystallinity index reduced after conversion to nanofibers CNFs form a complex network and act as a sole binder to make fiberboards CNFs were utilized as a reinforcing agent for PVAc in preparation of LVLs

Environment-friendly, high-performance cellulose nanofiber-vanillin epoxy nanocomposite with excellent mechanical, thermal insulation and UV shielding properties

With the increased demand for biobased epoxy thermosets as an alternative to petroleum-based materials in various fields, developing environment-friendly and high-performance natural fiber-biobased epoxy nanocomposites is crucial for industrial applications. Herein, an environment-friendly nanocomposite is reported by introducing cellulose nanofiber (CNF) in situ interaction with lignin-derived vanillin epoxy (VE) monomer and 4, 4´-diaminodiphenyl methane (DDM) hardener that serves as a multifunctional platform. The CNF-VE nanocomposite is fabricated by simply dispersing the CNF suspension to the VE and DDM hardener solution through the in-situ reaction, and its mechanical properties and thermal insulation behavior, wettability, chemical resistance, and optical properties are evaluated with the CNF weight percent variation. The well-dispersed CNF-VE nanocomposite exhibited high tensile strength (∼127.78 ± 3.99 MPa) and strain-at-break (∼16.49 ± 0.61 %), haziness (∼50 %) and UV-shielding properties. The in situ loading of CNF forms covalent crosslinking with the VE and favors improving the mechanical properties along with the homogeneous dispersion of CNF. The CNF-VE nanocomposite also shows lower thermal conductivity (0.26 Wm−1K−1) than glass. The environment-friendly and high-performance nanocomposite provides multiple platforms and can be used for building materials.

Potential use of nanofibrillated cellulose-loaded cationic starch solutions as coating formulation for recycled fluting papers

Effects of cellulose nanofibers (CNF) and cationic starch (CS) were evaluated as coating components relative to the physical and mechanical properties of fluting papersheets fabricated from recycled corrugated cardboard fibers. Fabricated fluting papers were subjected to size press applications by three different coating blends. Coating suspensions were prepared at various concentrations of CNF (0.5%, 1%, 2%, 3%, and 4%) and 4 wt% CS, and the same amounts of CS/CNF. The paper sheets were fabricated using size press machine as three-time repetitive applications, followed by one-time drying section, and compared to uncoated, CS-coated, and CNF-coated papers. The application of CNF suspensions increased tensile indices up to 11.7%. Moreover, CS/CNF suspensions resulted in a 67.2% increase in tensile index values. The coating of CS/CNF suspensions increased the burst index values by 163% at the CS+1%CNF concentration when compared to the control pulp. Surface application of prepared suspensions reduced the porosity of the samples under all conditions. The highest reduction in the air permeability was observed in the CS+4%CNF-coated samples as 91.5%. It can be concluded that the superficial applications of CNF on the physical and mechanical properties of recycled fluting paper was more effective in the presence of CS.

Nanofibers/reduced graphene oxide/polypyrrole for High-performance electrode material

Abstract This paper prepared the composite aerogel by adding graphene oxide (GO) and polypyrrole (PPy) to the cellulose nanofiber suspension. Then GO was reduced to RGO (reduced graphene oxide) with reducing agent, and CNFs/RGO/PPy composite aerogel with excellent conductivity was prepared. Scanning electron microscope (SEM) was adopted to analyze the structure and morphology of CNFs/RGO/PPy aerogel. Cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS) were employed to analyze its electrochemical properties. The results showed that the best structure and electrochemical effect could be obtained when the ratio of CNFs/RGO/PPy was 6:2:3. At the current density of 0.25 mA cm−2, CNFs/RGO/PPy composite aerogel had higher electrochemical performance, and the specific capacitance was 330 F g−1. As an energy storage material, the composite has excellent potential in electrode materials.

Exploring the potential of potato products: Puree and cellulose nanofibers, to improve the nutritional value of mayonnaise

This study aimed to prepare fat-reduced mayonnaise (FRM) using potato puree (PP) and cellulose nanofiber suspension (CNFS, 1.5% w/v) as fat replacer and nutrient supplement, to explore the potential of potato products. Compared with commercial mayonnaise, the texture and rheology of FRMs improved significantly. The optimal formulation of FRM (O-FRM) was selected, and the content of CNFS–PP mixture (the ratio of CNFS and PP was 10:90), corn oil, egg yolk, vinegar, sugar, and salt was 40.0%, 35.0%, 16.0%, 3.5%, 3.0%, and 2.5% (w/w), respectively. O-FRM displayed similar color with commercial full-fat mayonnaise (C-FFM). Its protein and dietary fiber contents were higher than C-FFM and commercial low-fat mayonnaise (C-LFM). Its oil content and energy were lower than C-FFM. Meanwhile, its total acceptability was lower than C-FFM but higher than C-LFM. Overall, CNFS and PP are promising for improving the nutritional quality while maintaining desirable textural and sensorial attributes of mayonnaise.

Green preparation of cellulose nanofibers via high-pressure homogenization and their film-forming properties

Cellulose nanofibers (CNFs) have captured extensive recognition owing to their unparalleled properties and environmental-friendliness. Green preparation process is an important step in realizing the sustainable development of CNFs. Herein, CNFs were prepared via high-pressure homogenization using commercial microcrystalline cellulose (MCC) as raw material, and subsequently employed for CNF films production by vacuum filtration. A comprehensive investigation was conducted to explore the influence of the homogenization processes on the stability, rheological characteristics of CNF suspensions, and the resultant properties of CNF films. The results showed that with the increase of homogenization pressure and cycles, the aspect ratio of CNFs increased, the dispersion stability of CNF suspensions improved, and the mechanical properties, hydrophilicity, air barrier property, and light transmittance of CNF films ascended, correspondingly. Under the homogenization pressure of 1000 bar with 15 cycles, the CNF sample exhibited an aspect ratio of 87.8 and a zeta potential of − 23.9 mV. Moreover, the CNF displayed favorable film-forming characteristics, with a tensile strength of 67 MPa, an air permeability of 4.8 µm/Pa·s, and a light transmittance of 70.2%. This work generally provides an effective and eco-friendly process for the preparation of CNFs and CNF films with high performance, which might hold great promise in biodegradable packaging application.

Contaminant microorganisms in the in vitro evaluation of cellular responses of cellulose nanofibers and their microbial inactivation using gamma irradiation

Cellulose nanofibers (CNFs) are fibrous nanomaterials produced from plants. Since some nanomaterials are toxic, toxicity evaluation, including in vitro examinations using cultured cells, is essential for the effective use of CNFs. On the other hand, microorganisms in the environment can contaminate CNF suspensions. The contamination of CNF samples and the effects of contaminating microorganisms on in vitro examinations were investigated in this study. Microorganism contamination in CNF samples was examined, and microbial inactivation of CNF suspensions using gamma irradiation was evaluated. After gamma-ray irradiation at absorbed doses of 0.5, 1, 5, and 10 kGy, the cellular effects of CNF suspensions were examined using 6 types of cultured cell, HaCaT, A549, Caco-2, MeT-5A, THP-1, and NR8383 cells. CNF samples were contaminated with bacteria and CNF suspensions exhibited endotoxin activity. Gamma irradiation effectively inactivated the microorganisms contained in the CNF suspensions. When the absorbed dose was 10 kGy, the fiber length of CNF was shortened, but the effect on CNF was small at 1.0 kGy or less. CNF suspensions showed lipopolysaccharides (LPS)-like cellular responses and strongly induced interleukin-8, especially in macrophages. Absorbed doses of at least 10 kGy did not affect the LPS-like activity. In this study, it was shown that the CNF suspension may be contaminated with microorganisms. Gamma irradiation was effective for microbial inactivation of suspension for invitor toxicity evaluation of CNF. In vitro evaluation of CNFs requires attention to the effects of contaminants such as LPS.

Water vapor permeability of smooth cellulose nanofiber film prepared via spraying

Eco-friendly and greener barrier materials are required to replace the synthetic packaging materials as they produce a threat to environment. These can be fabricated by natural polymers such as cellulose nanofiber (CNF). The sustainability of CNF was so amazing due to its potential for circular economy and provides alternative platform for synthetic plastics. The challenging task to fabricate CNF films still existed and also current methods have various limitations. CNF films have good oxygen permeability and the value was lower than synthetic plastics. However, CNF films have poor water vapour permeability and higher than that of synthetic plastics. The fabrication method is one of strong parameters to impact on the water permeability of CNF films. The deposition of CNF suspension on the stainless-steel plate via spraying, is a potential process for fabrication for CNF films acting as barrier material against water vapour. In spraying process, the time required to form CNF films in diameter of 15.9 cm was less than 1 min and it is independent of CNF content in the suspension. The uniqueness of CNF films via the spraying process was their surfaces, such as rough surface exposed to air and smooth surface exposed to stainless steel. Their surfaces were investigated by SEM, AFM and optical profilometry micrographs, confirming that the smooth surface was evaluated notable lower surface roughness. The spray coated surface was smooth and glossy and its impact on the water vapor permeability remains obscure. The spraying process is a flexible process to tailor the basis weight and thickness of CNF films can be adjusted by the spraying of CNF suspension with varying fibre content. The water vapour permeability of CNF films can be tailored via varying density of CNF films. The plot between water vapour transfer rate (WVTR)/water vapour and density of CNF films has been investigated. The WVP of spray coated CNF films varied from 6.99 ± 1.17 × 10−11 to 4.19 ± 1.45 × 10−11 g/m.s.Pa. with the density from 664 Kg/m3 to 1,412.08 Kg/m3. The WVP of CNF films achieved with 2 wt% CNF films (1,120 Kg/m3) was 3.91 × 10−11 g/m.s.Pa. These values were comparable with the WVP of synthetic plastics. Given this correspondence, CNF films via spraying have a good barrier against water vapour. This process is a potential for scale up and commercialization of CNF films as barrier materials.

Spray-assisted LBL assembly of chitosan/nanocellulose as coatings of commercial membranes for oil-in-water emulsion separation

Owing to the limitation of their wettability and pore size, lab filter membranes could not separate oil/water emulsions. Herein, we present surface modification of commercial membranes with chitosan/nanocellulose coatings via a spray-assisted layer-by-layer (LBL) assembly technology. By alternate spraying chitosan (CS) solution and TEMPO-oxidized tunicate cellulose nanofiber (TCNF) suspension, (CS/TCNF)n multilayers were obtained, where n denotes the number of bilayers. The (CS/TCNF)6 coated membrane possessed superhydrophilicity, underwater superoleophobicity, and outperforming anti-oil-fouling properties, which could effectively separate various oil-in-water emulsions. Importantly, the (CS/TCNF)6 coated membrane not only had stable permeate flux with nearly 100 % recovery ratio for the separation of pump oil-in-water emulsion, but also exhibited good harsh-environment-tolerant property. This work provided a novel strategy for designing and preparing stable anti-oil-fouling membranes for oily wastewater treatment.

Cellulose Nanofiber-Coated Perfluoropentane Droplets: Fabrication and Biocompatibility Study.

To study the effect of cellulose nanofiber (CNF)-shelled perfluoropentane (PFP) droplets on the cell viability of 4T1 breast cancer cells with or without the addition of non-encapsulated paclitaxel. The CNF-shelled PFP droplets were produced by mixing a CNF suspension and PFP using a homogenizer. The volume size distribution and concentration of CNF-shelled PFP droplets were estimated from images taken with an optical microscope and analyzed using Fiji software and an in-house Matlab script. The thermal stability was qualitatively assessed by comparing the size distribution and concentration of CNF-shelled PFP droplets at room temperature (~22°) and 37°C. The cell viability of 4T1 cells was measured using a 3-[4,5-dimethylthiazol-2yl]-2,5-diphenyltetrazolium bromide (MTT) assay. Additionally, a hemolysis assay was performed to assess blood compatibility of CNF-shelled PFP droplets. The droplet diameter and concentration of CNF-shelled PFP droplets decreased after 48 hours at both room temperature and 37°C. In addition, the decrease in concentration was more significant at 37°C, from 3.50 ± 0.64×106 droplets/mL to 1.94 ± 0.10×106 droplets/mL, than at room temperature, from 3.65 ± 0.29×106 droplets/mL to 2.56 ± 0.22×106 droplets/mL. The 4T1 cell viability decreased with increased exposure time and concentration of paclitaxel, but it was not affected by the presence of CNF-shelled PFP droplets. No hemolysis was observed at any concentration of CNF-shelled PFP droplets. CNF-shelled PFP droplets have the potential to be applied as drug carriers in ultrasound-mediated therapy.

Production of salad dressings via the use of economically prepared cellulose nanofiber from lime residue as a functional ingredient.

Production of cellulose nanofiber (CNF) via the use of a more economical and less energy-intensive means is desirable. Once formed, it is necessary to determine whether or not the prepared CNF would be capable of forming a Pickering emulsion as in the case of traditionally prepared nanofiber. In the present study, oil-in-water emulsions, namely, salad dressings, with CNF as a functional ingredient, were prepared. Lime residue powder as the source of dietary fiber was subject to high-shear homogenization to form CNF suspension, which was then mixed with other ingredients. Different contents of fat (20%-40%), egg yolk (0%-4%), and lime residue powder (0%-4%) were tested. The formed CNF successfully acted as a Pickering emulsifier and allowed the production of salad dressings with desirable characteristics at 30%-40% fat, 2% egg yolk, and 2% lime residue powder. The dressings exhibited adequate physicochemical properties and remained stable throughout the storage period of 28 days. PRACTICAL APPLICATION: The presently proposed means would allow the industry to produce cellulose nanofiber (CNF) in a more economical and less energy-intensive manner. The so-produced CNF exhibits comparable properties as traditionally prepared nanofiber and can be used as a stabilizer in food emulsions.

Effect of cellulose nanofibers on the fracture toughness mode II of glass fiber/epoxy composite laminates

Cellulose nanofibers (CNFs) were used to improve the fracture toughness of glass fiber reinforced epoxy composites (GFRPs). Different CNF suspensions were prepared and sprayed onto the surface of woven glass fiber laminates. The vacuum resin transfer molding (VaRTM) process was used to manufacture the GFRP composites. End notch flexure tests were conducted to evaluate the effect of CNFs on the critical energy release rate in mode II fracture toughness GIIC. The results revealed that 0.05 wt% was the optimum concentration. The interlaminar fracture toughness GIIC was improved by 28% with the addition of 0.05 wt% of CNFs to GF/epoxy composites. Whereas 0.1 wt% of CNFs resulted in decreasing GIIC due to the uncomplete impregnation of GF with epoxy resin caused by the thicker CNF layer at the interfacial laminates. The toughening mechanisms were investigated using a field-emission electron microscope. Large epoxy deformations and shear hackles were predominant for improving the interlaminar fracture toughness of GFRP composites.

Sponges from Plasma Treated Cellulose Nanofibers Grafted with Poly(ethylene glycol)methyl Ether Methacrylate.

In this work, cellulose nanofibers (CNF) were surface treated by plasma and grafted with poly(ethylene glycol)methyl ether methacrylate (PEGMMA) for increasing mechanical strength and hydrophobicity. The surface characteristics of the sponges were studied by scanning electron microscopy, micro-computed tomography, and Fourier transform infrared spectroscopy, which demonstrated successful surface modification. Plasma treatment applied to CNF suspension led to advanced defibrillation, and the resulting sponges (CNFpl) exhibited smaller wall thickness than CNF. The grafting of PEGMMA led to an increase in the wall thickness of the sponges and the number of larger pores when compared with the non-grafted counterparts. Sponges with increased hydrophobicity demonstrated by an almost 4 times increase in the water contact angle and better mechanical strength proved by 2.5 times increase in specific compression strength were obtained after PEGMMA grafting of plasma treated CNF. Cells cultivated on both neat and PEGMMA-grafted CNF sponges showed high viability (>99%). Remarkably, CNF grafted with PEGMMA showed better cell viability as compared with the untreated CNF sample; this difference is statistically significant (p < 0.05). In addition, the obtained sponges do not trigger an inflammatory response in macrophages, with TNF-α secretion by cells in contact with CNFpl, CNF-PEGMMA, and CNFpl-PEGMMA samples being lower than that observed for the CNF sample. All these results support the great potential of cellulose nanofibers surface treated by plasma and grafted with PEGMMA for biomedical applications.

MXene supported by cotton fabric as electrode layer of triboelectric nanogenerators for flexible sensors

In this work, Ti3C2 MXene supported by cotton fabric was used as electrode layer to construct a novel triboelectric nanogenerator (TENG) as self-powered flexible sensors. The electrode layer was made by immersing cotton fabric in the mixing suspension of Ti3C2 MXene and cellulose nanofibers (CNFs). In the electrode layer, Ti3C2 MXene provides the electrical conductivity and electrical negativity. The fabric substrate provides the strength and flexibility of the electrode layer. The MXene on the surface of electrode layer can lose electrons if it frictionally contacts the friction layer of TENG, silicone rubber. The TENG can produce open-circuit voltage up to 400 V in single-electrode mode during the press-release cycles of a human’s palm. The harvested energy can directly power 32 green light emitting diodes connected in series and charge capacitors. The TENG can sense the mass of touched steel object (2–200 g) with good repeatability and linear relationship. The TENG can be stretched up to 100 % of the original length and can produce different voltage signals according to the bending/folding angles. The TENG exhibits excellent flexibility and sensing performance to be applied as self-powered flexible sensors to monitor various physiological movements of the human body.

Unexpected Gelation Behavior of Cellulose Nanofibers Dispersed in Glycols

In this study, the gelation behavior of TEMPO-oxidized wood-based cellulose nanofiber (CNF) suspensions in two different glycols, ethylene glycol (EG) and propylene glycol (PG), was investigated near the overlap concentration and compared with that of aqueous CNF suspensions. The flow property of these non-aqueous and aqueous CNF suspensions was characterized by rheological, UV–vis, and rheo-optical techniques. It was found that the CNF(PG) suspensions exhibited stirring-reversible gelation behavior, where gelation could be induced simply by resting (i.e., prolonged holding time). However, this behavior was not observed for CNF(EG) and CNF(aq) suspensions. Higher temperature and higher CNF concentration could accelerate the gelation process of CNFs in PG, but no large-scale phase separation was detected by the optical techniques. Our study suggests that the reduced hydrophilic attraction between CNFs in PG is the main driving force for forming CNF-rich micro-domains, yielding a physically crosslinked network. This study suggests that the choice of solvent can be used to tailor and control the flow behavior of CNF suspensions, leading to designs of new cellulose-enabled nanocomposites for varying applications.

Cellulose Nanofiber Films and Their Vibration Energy Harvesting.

Cellulose, the most abundant sustainable material on Earth, has excellent mechanical and physical properties, high optical transparency, biocompatibility, and piezoelectricity. So, it has many possibilities for future materials, and many researchers are interested in its application. In this paper, cellulose nanofiber (CNF) and CNF/polyvinyl alcohol (PVA) films are made, and their vibration energy harvesting is studied. CNF was isolated by chemical and physical methods, and the CNF suspension was cast on a flat substrate to make a film. A cast CNF wet film stayed in a 5 Tesla superconductor magnet for 7 days, which resulted in CNF alignment perpendicular to the magnetic field. To further improve the mechanical properties of the CNF film, mechanical stretching was applied. The CNF suspension was mixed with PVA, giving the film toughness. The cast CNF/PVA wet film was mechanically stretched and dried, which improved the CNF alignment. The fabricated CNF and CNF/PVA films were characterized using scanning electron microscopy and X-ray diffraction to verify the alignment. By stretching, the aligned CNF/PVA film exhibits the largest mechanical properties along the aligned direction. The maximum Young’s modulus and tensile strength of the 50% stretched CNF/PVA film are 14.9 GPa and 170.6 MPa, respectively. Finally, a vibration energy harvesting experiment was performed by invoking the piezoelectric behavior of the pure CNF, and 50% stretched CNF/PVA films. The harvester structure was innovated by adopting a cymbal structure, which was beneficial to producing large in-plane strain on the films. The designed cymbal structure was analyzed using ANSYS, and its natural frequency was experimentally verified. The CNF/PVA film performs better vibration energy harvesting than the pure CNF film. The CNF/PVA film is applicable for biocompatible and flexible vibration energy harvesting.