Cellulose-binding Ability Research Articles

A sensitive paper-based lateral flow immunoassay platform using engineered cellulose-binding protein linker fused with antibody-binding domains

An advanced paper-based LFIA using engineered cellulose-binding protein linker fused with antibody-binding domains was developed to resolve problems associated with conventional LFIA strip, including the limitation of quantitative analysis and low sensitivity. CBP31-BC linker was prepared by genetically fusing the cellulose-binding modules of family 3 (CBM3) and family 1 (CBM1) with antibody-binding B and C domains of Protein A. Cellulose-binding analysis showed that the addition of two CBMs led to high cellulose-binding capacity in CBP31-BC. Transmission electron microscopy and quartz crystal microbalance analyses demonstrated that the cellulose-binding ability of CBP31-BC enabled the BC domain to be efficiently exposed, allowing about 6-fold higher antibody-binding efficiency (∼32.5 %) than that (∼5.5 %) of sole BC. To evaluate the feasibility of the CBP31-BC linker-employed LFIA platform, an immunoassay of prostate-specific antigen (PSA) was performed as a model reaction. The CBP31-BC-employed paper-based LFIA detected PSA at levels as low as 0.25 ng/mL in 20 min, which is about 10-fold more sensitive to conventional LFIAs that use simple physical adsorption. CBP31-BC-employed LFIA also exhibited a lower detection range of 0.25–2.5 ng/mL when compared to conventional LFIAs. These results might be due to efficient oriented immobilization of the capture antibody by CBP31-BC linker on cellulose membrane. Thus, our developed CBP31-BC linker-employed paper-based LFIA platform holds great promise for the detection of target markers due to significantly enhanced sensitivity.

Identification and Biochemical Characterization of Major β-Mannanase in Talaromyces cellulolyticus Mannanolytic System.

Talaromyces cellulolyticus is a promising fungus for providing a cellulase preparation suitable for the hydrolysis of lignocellulosic material, although its mannan-degrading activities are insufficient. In the present study, three core mannanolytic enzymes, including glycosyl hydrolase family 5-7 (GH5-7) β-mannanase (Man5A), GH27 α-galactosidase, and GH2 β-mannosidase, were purified from a culture supernatant of T. cellulolyticus grown with glucomannan, and the corresponding genes were identified based on their genomic sequences. Transcriptional analysis revealed that these genes were specifically induced by glucomannan. Two types of Man5A products, Man5A1 and Man5A2, were found as major proteins in the mannanolytic system. Man5A1 was devoid of a family 1 carbohydrate-binding module (CBM1) at the N-terminus, whereas Man5A2 was devoid of both CBM1 and Ser/Thr-rich linker region. The physicochemical and catalytic properties of both Man5A1 and Man5A2 were identical to those of recombinant Man5A (rMan5A) possessing CBM1, except for the cellulose-binding ability. Man5A CBM1 had little effect on mannan hydrolysis of pretreated Hinoki cypress. The results suggest that an improvement in Man5A CBM1 along with the augmentation of identified mannanolytic enzyme components would aid in efficient hydrolysis of softwood using T. cellulolyticus cellulase preparation.

A Disulfide Oxidoreductase (CHU_1165) Is Essential for Cellulose Degradation by Affecting Outer Membrane Proteins in Cytophaga hutchinsonii.

Cytophaga hutchinsonii cells can bind to the surface of insoluble cellulose and degrade it by utilizing a novel cell contact-dependent mechanism, in which the outer membrane proteins may play important roles. In this study, the deletion of a gene locus, chu_1165, which encodes a hypothetical protein with 32% identity with TlpB, a disulfide oxidoreductase in Flavobacterium psychrophilum, caused a complete cellulolytic defect in C. hutchinsonii Further study showed that cells of the Δ1165 strain could not bind to cellulose, and the levels of many outer membrane proteins that can bind to cellulose were significantly decreased. The N-terminal region of CHU_1165 is anchored to the cytoplasmic membrane with five predicted transmembrane helices, and the C-terminal region is predicted to stretch to the periplasm and has a similar thioredoxin (Trx) fold containing a Cys-X-X-Cys motif that is conserved in disulfide oxidoreductases. Recombinant CHU_1165His containing the Cys-X-X-Cys motif was able to reduce the disulfide bonds of insulin in vitro Site-directed mutation showed that the cysteines in the Cys-X-X-Cys motif and at residues 106 and 108 were indispensable for the function of CHU_1165. Western blotting showed that CHU_1165 was in an oxidized state in vivo, suggesting that it may act as an oxidase to catalyze disulfide bond formation. However, many of the decreased outer membrane proteins that were essential for cellulose degradation contained no or one cysteine, and mutation of the cysteine in these proteins did not affect cellulose degradation, indicating that CHU_1165 may have an indirect or pleiotropic effect on the function of these outer membrane proteins.IMPORTANCECytophaga hutchinsonii can rapidly digest cellulose in a contact-dependent manner, in which the outer membrane proteins may play important roles. In this study, a hypothetical protein, CHU_1165, characterized as a disulfide oxidoreductase, is essential for cellulose degradation by affecting the cellulose binding ability of many outer membrane proteins in C. hutchinsonii Disulfide oxidoreductases are involved in disulfide bond formation. However, our studies show that many of the decreased outer membrane proteins that were essential for cellulose degradation contained no or one cysteine, and mutation of cysteine did not affect their function, indicating that CHU_1165 did not facilitate the formation of a disulfide bond in these proteins. It may have an indirect or pleiotropic effect on the function of these outer membrane proteins. Our study provides an orientation for exploring the proteins that assist in the appropriate conformation of many outer membrane proteins essential for cellulose degradation, which is important for exploring the novel mechanism of cellulose degradation in C. hutchinsonii.

Molecular characterization of hypothetical scaffolding-like protein S1 in multienzyme complex produced by Paenibacillus curdlanolyticus B-6

Paenibacillus curdlanolyticus B-6 produces an extracellular multienzyme complex containing a hypothetical scaffolding-like protein and several xylanases and cellulases. The largest (280-kDa) component protein, called S1, has cellulose-binding ability and xylanase activity, thus was considered to function like the scaffolding proteins found in cellulosomes. S1 consists of 863 amino acid residues with predicted molecular mass 91,029 Da and includes two N-terminal surface layer homology (SLH) domains, but most of its sequence shows no homology with proteins of known function. Native S1 (nS1) was highly glycosylated. Purified nS1 and recombinant Xyn11A (rXyn11A) as a major xylanase subunit could assemble in a complex, but recombinant S1 (rS1) could not interact with rXyn11A, indicating that S1 glycosylation is necessary for assembly of the multienzyme complex. nS1 and rS1 showed weak, typical endo-xylanase activity, even though they have no homology with known glycosyl hydrolase family enzymes. S1 and its SLH domains bound tightly to the peptide-glycan layer of P. curdlanolyticus B-6, microcrystalline cellulose, and insoluble xylan, indicating that the SLHs of S1 bind to carbohydrate polymers and the cell surface. When nS1 and rXyn11A were co-incubated with birchwood xylan, the degradation ability was synergistically increased compared with that for each protein; however synergy was not observed for rS1 and rXynA. These results indicate that S1 may have a scaffolding protein-like function by interaction with enzyme subunits and polysaccharides through its glycosylated sites and SLH domains.

Biomimetic strategy for constructing Clostridium thermocellum cellulosomal operons in Bacillus subtilis

BackgroundEnzymatic conversion of lignocellulosic biomass into soluble sugars is a major bottleneck in the plant biomass utilization. Several anaerobic organisms cope these issues via multiple-enzyme complex system so called ‘cellulosome’. Hence, we proposed a “biomimic operon” concept for making an artificial cellulosome which can be used as a promising tool for the expression of cellulosomal enzymes in Bacillus subtilis.ResultsAccording to the proteomic analysis of Clostridium thermocellum ATCC27405 induced by Avicel or cellobiose, we selected eight highly expressed cellulosomal genes including a scaffoldin protein gene (cipA), a cell-surface anchor gene (sdbA), two exoglucanase genes (celK and celS), two endoglucanase genes (celA and celR), and two xylanase genes (xynC and xynZ). Arranging these eight genes in two different orders, we constructed two different polycistronic operons using the ordered gene assembly in Bacillus method. This is the first study to express the whole CipA along with cellulolytic enzymes in B. subtilis. Each operon was successfully expressed in B. subtilis RM125, and the protein complex assembly, cellulose-binding ability, thermostability, and cellulolytic activity were demonstrated. The operon with a higher xylanase activity showed greater saccharification on complex cellulosic substrates such as Napier grass than the other operon.ConclusionsIn this study, a strategy for constructing an efficient cellulosome system was developed and two different artificial cellulosomal operons were constructed. Both operons could efficiently express the cellulosomal enzymes and exhibited cellulose saccharification. This strategy can be applied to different industries with cellulose-containing materials, such as papermaking, biofuel, agricultural compost, mushroom cultivation, and waste processing industries.

Processivity and enzymatic mechanism of a multifunctional family 5 endoglucanase from Bacillus subtilis BS-5 with potential applications in the saccharification of cellulosic substrates

BackgroundPresently, enzymes still constitute a major part of the cost of biofuel production from lignocellulosic biomass. Processive endoglucanases, which possess both endoglucanase and exoglucanase activity, have the potential to reduce the costs of biomass saccharification when used together with commercial cellulases. Therefore, the exploration of new processive endoglucanases has attracted much attention with a view to accelerating the industrialization of biofuels and biochemicals.ResultsThe endoglucanase EG5C and its truncated form EG5C-1 from Bacillus subtilis BS-5 were expressed and characterized. EG5C was a typical endoglucanase, comprised of a family 5 catalytic domain and family 3 carbohydrate-binding domain, and which had high activity toward soluble cellulosic substrates, but low activity toward insoluble cellulosic substrates. Importantly, the truncated form EG5C-1 was a processive endoglucanase that hydrolyzed not only carboxymethyl cellulose (CMC), but also insoluble cellulosic substrates. The hydrolytic activities of EG5C-1 towards CMC, phosphoric acid-swollen cellulose (PASC), p-nitrophenyl-β-d-cellobioside, filter paper and Avicel are 4170, 700, 2550, 405 and 320 U/μmol, respectively. These data demonstrated that EG5C-1 had higher activity ratio of exoglucanase to endoglucanase than other known processive endoglucanases. When PASC was degraded by EG5C-1, the ratio of soluble to insoluble reducing sugars was about 3.7 after 3 h of incubation with cellobiose and cellotriose as the main products. Importantly, EG5C-1 alone was able to hydrolyze filter paper and PASC. At 5% substrate concentration and 10 FPU/g PASC enzyme loading, the saccharification yield was 76.5% after 60 h of incubation. Replacement of a phenylalanine residue (F238) by an alanine at the entrance/exit of the substrate binding cleft significantly reduces the ability of EG5C-1 to degrade filter paper and Avicel, but this mutation has little impact on CMCase activity. The processivity of this mutant was also greatly reduced while its cellulose binding ability was markedly enhanced.ConclusionsThe processive endoglucanase EG5C-1 from B. subtilis BS-5 exhibits excellent properties that render it a suitable candidate for use in biofuel and biochemical production from lignocellulosic biomass. In addition, our studies also provide useful information for research on enzyme processivity at the molecular level.

Probing the Functions of Carbohydrate Binding Modules in the CBEL Protein from the Oomycete Phytophthora parasitica.

Oomycetes are microorganisms that are distantly related to true fungi and many members of this phylum are major plant pathogens. Oomycetes express proteins that are able to interact with plant cell wall polysaccharides, such as cellulose. This interaction is thought to be mediated by carbohydrate-binding modules that are classified into CBM family 1 in the CAZy database. In this study, the two CBMs (1–1 and 1–2) that form part of the cell wall glycoprotein, CBEL, from Phytophthora parasitica have been submitted to detailed characterization, first to better quantify their interaction with cellulose and second to determine whether these CBMs can be useful for biotechnological applications, such as biomass hydrolysis. A variety of biophysical techniques were used to study the interaction of the CBMs with various substrates and the data obtained indicate that CBEL’s CBM1-1 exhibits much greater cellulose binding ability than CBM1-2. Engineering of the family 11 xylanase from Talaromyces versatilis (TvXynB), an enzyme that naturally bears a fungal family 1 CBM, has produced two variants. The first one lacks its native CBM, whereas the second contains the CBEL CBM1-1. The study of these enzymes has revealed that wild type TvXynB binds to cellulose, via its CBM1, and that the substitution of its CBM by oomycetal CBM1-1 does not affect its activity on wheat straw. However, intriguingly the addition of CBEL during the hydrolysis of wheat straw actually potentiates the action of TvXynB variant lacking a CBM1. This suggests that the potentiating effect of CBM1-1 might not require the formation of a covalent linkage to TvXynB.

Contribution of a family 1 carbohydrate-binding module in thermostable glycoside hydrolase 10 xylanase from Talaromyces cellulolyticus toward synergistic enzymatic hydrolysis of lignocellulose.

BackgroundEnzymatic removal of hemicellulose components such as xylan is an important factor for maintaining high glucose conversion from lignocelluloses subjected to low-severity pretreatment. Supplementation of xylanase in the cellulase mixture enhances glucose release from pretreated lignocellulose. Filamentous fungi produce multiple xylanases in their cellulase system, and some of them have modular structures consisting of a catalytic domain and a family 1 carbohydrate-binding module (CBM1). However, the role of CBM1 in xylanase in the synergistic hydrolysis of lignocellulose has not been investigated in depth.ResultsThermostable endo-β-1,4-xylanase (Xyl10A) from Talaromyces cellulolyticus, which is recognized as one of the core enzymes in the fungal cellulase system, has a modular structure consisting of a glycoside hydrolase family 10 catalytic domain and CBM1 at the C-terminus separated by a linker region. Three recombinant Xyl10A variants, that is, intact Xyl10A (Xyl10Awt), CBM1-deleted Xyl10A (Xyl10AdC), and CBM1 and linker region-deleted Xyl10A (Xyl10AdLC), were constructed and overexpressed in T. cellulolyticus. Cellulose-binding ability of Xyl10A CBM1 was demonstrated using quartz crystal microbalance with dissipation monitoring. Xyl10AdC and Xyl10AdLC showed relatively high catalytic activities for soluble and insoluble xylan substrates, whereas Xyl10Awt was more effective in xylan hydrolysis of wet disc-mill treated rice straw (WDM-RS). The enzyme mixture of cellulase monocomponents and intact or mutant Xyl10A enhanced the hydrolysis of WDM-RS glucan, with the most efficient synergism found in the interactions with Xyl10Awt. The increased glucan hydrolysis yield exhibited a linear relationship with the xylan hydrolysis yield by each enzyme. This relationship revealed significant hydrolysis of WDM-RS glucan with lower supplementation of Xyl10Awt.ConclusionsOur results suggest that Xyl10A CBM1 has the following two roles in synergistic hydrolysis of lignocellulose by Xyl10A and cellulases: enhancement of lignocellulosic xylan hydrolysis by binding to cellulose, and the efficient removal of xylan obstacles that interrupt the cellulase activity (because of similar binding target of CBM1). The combination of CBM-containing cellulases and xylanases in a fugal cellulase system could contribute to reduction of the enzyme loading in the hydrolysis of pretreated lignocelluloses.

Characterization of a multi-function processive endoglucanase CHU_2103 from Cytophaga hutchinsonii

Cytophaga hutchinsonii is a Gram-negative gliding bacterium which can efficiently degrade crystalline cellulose by an unknown strategy. Genomic analysis suggests the C. hutchinsonii genome lacks homologs to an obvious exoglucanase that previously seemed essential for cellulose degradation. One of the putative endoglucanases, CHU_2103, was successfully expressed in Escherichia coli JM109 and identified as a processive endoglucanase with transglycosylation activity. It could hydrolyze carboxymethyl cellulose (CMC) into cellodextrins and rapidly decrease the viscosity of CMC. When regenerated amorphous cellulose (RAC) was degraded by CHU_2103, the ratio of the soluble to insoluble reducing sugars was 3.72 after 3 h with cellobiose and cellotriose as the main products, indicating that CHU_2103 was a processive endoglucanase. CHU_2103 could degrade cellodextrins of degree of polymerization ≥3. It hydrolyzed p-nitrophenyl β-D-cellodextrins by cutting glucose or cellobiose from the non-reducing end. Meanwhile, some larger-molecular-weight cellodextrins could be detected, indicating it also had transglycosylation activity. Without carbohydrate-binding module (CBM), CHU_2103 could bind to crystalline cellulose and acted processively on it. Site-directed mutation of CHU_2103 demonstrated that the conserved aromatic amino acid W197 in the catalytic domain was essential not only for its processive activity, but also its cellulose binding ability.

A single mutation reforms the binding activity of an adhesion-deficient family 3 carbohydrate-binding module

The crystal structure of the family 3b carbohydrate-binding module (CBM3b) of the cellulosomal multimodular hydrolytic enzyme cellobiohydrolase 9A (Cbh9A) from Clostridium thermocellum has been determined. Cbh9A CBM3b crystallized in space group P4(1) with four molecules in the asymmetric unit and diffracted to a resolution of 2.20 Å using synchrotron radiation. The structure was determined by molecular replacement using C. thermocellum Cel9V CBM3b' (PDB entry 2wnx) as a model. The C.thermocellum Cbh9A CBM3b molecule forms a nine-stranded antiparallel β-sandwich similar to other family 3 carbohydrate-binding modules (CBMs). It has a short planar array of two aromatic residues that are assumed to bind cellulose, yet it lacks the ability to bind cellulose. The molecule contains a shallow groove of unknown function that characterizes other family 3 CBMs with high sequence homology. In addition, it contains a calcium-binding site formed by a group of amino-acid residues that are highly conserved in similar structures. After determination of the three-dimensional structure of Cbh9A CBM3b, the site-specific N126W mutant was produced with the intention of enhancing the cellulose-binding ability of the CBM. Cbh9A CBM3b(N126W) crystallized in space group P4(1)2(1)2, with one molecule in the asymmetric unit. The crystals diffracted to 1.04 Å resolution using synchrotron radiation. The structure of Cbh9A CBM3b(N126W) revealed incorporation of the mutated Trp126 into the putative cellulose-binding strip of residues. Cellulose-binding experiments demonstrated the ability of Cbh9A CBM3b(N126W) to bind cellulose owing to the mutation. This is the first report of the engineered conversion of a non-cellulose-binding CBM3 to a binding CBM3 by site-directed mutagenesis. The three-dimensional structure of Cbh9A CBM3b(N126W) provided a structural correlation with cellulose-binding ability, revealing a longer planar array of definitive cellulose-binding residues.

A new locus affects cell motility, cellulose binding, and degradation by Cytophaga hutchinsonii

Cytophaga hutchinsonii is a Gram-negative gliding bacterium, which can rapidly degrade crystalline cellulose via a novel strategy without any recognizable processive cellulases. Its mechanism of cellulose binding and degradation is still a mystery. In this study, the mutagenesis of C. hutchinsonii with the mariner-based transposon HimarEm3 and gene complementation with the oriC-based plasmid carrying the antibiotic resistance gene cfxA or tetQ were reported for the first time to provide valuable tools for mutagenesis and genetic manipulation of the bacterium. Mutant A-4 with a transposon mutation in gene CHU_0134, which encodes a putative thiol-disulfide isomerase exhibits defects in cell motility and cellulose degradation. The cellulose binding ability of A-4 was only half of that of the wild-type strain, while the endo-cellulase activity of the cell-free supernatants and on the intact cell surface of A-4 decreased by 40%. Sodium dodecyl sulfate polyacrylamide gel electrophoresis of proteins binding to cellulose in the outer membrane showed that most of them were significantly decreased or disappeared in A-4 including some Gld proteins and hypothetical proteins, indicating that these proteins might play an important role in cell motility and cellulose binding and degradation by the bacterium.

Engineering a family 9 processive endoglucanase from Paenibacillus barcinonensis displaying a novel architecture

Cel9B from Paenibacillus barcinonensis is a modular endoglucanase with a novel molecular architecture among family 9 enzymes that comprises a catalytic domain (GH9), a family 3c cellulose-binding domain (CBM3c), a fibronectin III-like domain repeat (Fn3(1,2)), and a C-terminal family 3b cellulose-binding domain (CBM3b). A series of truncated derivatives of endoglucanase Cel9B have been constructed and characterized. Deletion of CBM3c produced a notable reduction in hydrolytic activity, while it did not affect the cellulose-binding properties as CBM3c did not show the ability to bind to cellulose. On the contrary, CBM3b exhibited binding to cellulose. The truncated forms devoid of CBM3b lost cellulose-binding ability and showed a reduced activity on crystalline cellulose, although activity on amorphous celluloses was not affected. Endoglucanase Cel9B produced only a small ratio of insoluble products from filter paper, while most of the reducing ends produced by the enzyme were released as soluble sugars (91%), indicating that it is a processive enzyme. Processivity of Cel9B resides in traits contained in the tandem of domains GH9-CBM3c, although the slightly reduced processivity of truncated form GH9-CBM3c suggests a minor contribution of domains Fn3(1,2) or CBM3b, not contained in it, on processivity of endoglucanase Cel9B.

Parameter and process significance in mechanistic modeling of cellulose hydrolysis

A process-based model relevant to landfill and anaerobic digesters was developed, which included a novel approach to biomass transfer between a cellulose-bound biofilm and biomass in the bulk liquid. Model results highlighted the significance of the bacterial colonization of cellulose particles by attachment through contact in solution. Simulations revealed that both enhanced colonization and cellulose degradation are associated with reduced cellulose particle size, increased biomass populations in solution and increased cellulose-binding ability of the biomass. This suggests that transportation of biomass into the system from elsewhere and/or bacterial inoculation of such systems could enhance degradation significantly. A sensitivity analysis of the system parameters revealed the biological rate and yield properties of the hydrolyzing bacteria are most significant with regard to cellulose degradation in the system.

Correlation between cellulose binding and activity of cellulose-binding domain mutants of Humicola grisea cellobiohydrolase 1

The cellulose-binding domains (CBDs) of fungal cellulases interact with crystalline cellulose through their hydrophobic flat surface formed by three conserved aromatic amino acid residues. To analyze the functional importance of these residues, we constructed CBD mutants of cellobiohydrolase 1 (CBH1) of the thermophilic fungus Humicola grisea, and examined their cellulose-binding ability and enzymatic activities. High activity on crystalline cellulose correlated with high cellulose-binding ability and was dependent on the combination and configuration of the three aromatic residues. Tyrosine works best in the middle of the flat surface, while tryptophan is the best residue in the two outer positions.

Identification of the cellulose-binding and the cell wall-binding domains of Eubacterium cellulosolvens 5 cellulose-binding protein A (CBPA)

The cellulose-binding domain (CBD) and the cell wall-binding domain (CWBD) of Eubacterium cellulosolvens 5 cellulose-binding protein A (CBPA) have been determined. The gene ( cbpA) encoding CBPA and its derivatives were expressed in Escherichia coli. We were able to obtain the eight recombinant proteins and examine for their cellulose-binding ability, cell wall-binding ability and carboxymethyl cellulase (CMCase) activity. Since five recombinant proteins, which contain the unknown domain (UD-2) located between two linker-like regions of CBPA, bound to cellulose, this region has been identified as the CBD. The CBD did not show a significant sequence similarity with any other CBDs. Moreover, the N-terminal region of CBPA showed a significant sequence similarity with a catalytic domain of glycosyl hydrolase family 9, and the recombinant proteins containing the region showed CMCase activity. Since the UD-3, which is located in the C-terminal region of CBPA, bound to the cell walls of E. cellulosolvens 5, the region has been identified as the CWBD. However, the CWBD did not show a significant sequence similarity with any other proteins previously reported.

Identification of the cellulose-binding and the cell wall-binding domains of Eubacterium cellulosolvens 5 cellulose-binding protein A (CBPA).

The cellulose-binding domain (CBD) and the cell wall-binding domain (CWBD) of Eubacterium cellulosolvens 5 cellulose-binding protein A (CBPA) have been determined. The gene (cbpA) encoding CBPA and its derivatives were expressed in Escherichia coli. We were able to obtain the eight recombinant proteins and examine for their cellulose-binding ability, cell wall-binding ability and carboxymethyl cellulase (CMCase) activity. Since five recombinant proteins, which contain the unknown domain (UD-2) located between two linker-like regions of CBPA, bound to cellulose, this region has been identified as the CBD. The CBD did not show a significant sequence similarity with any other CBDs. Moreover, the N-terminal region of CBPA showed a significant sequence similarity with a catalytic domain of glycosyl hydrolase family 9, and the recombinant proteins containing the region showed CMCase activity. Since the UD-3, which is located in the C-terminal region of CBPA, bound to the cell walls of E. cellulosolvens 5, the region has been identified as the CWBD. However, the CWBD did not show a significant sequence similarity with any other proteins previously reported.

Properties and mutation analysis of the CelK cellulose-binding domain from the Clostridium thermocellum cellulosome.

The family IV cellulose-binding domain of Clostridium thermocellum CelK (CBD(CelK)) was expressed in Escherichia coli and purified. It binds to acid-swollen cellulose (ASC) and bacterial microcrystalline cellulose (BMCC) with capacities of 16.03 and 3.95 micromol/g of cellulose and relative affinities (K(r)) of 2.33 and 9.87 liters/g, respectively. The CBD(CelK) is the first representative of family IV CBDs to exhibit an affinity for BMCC. The CBD(CelK) also binds to the soluble polysaccharides lichenin, glucomannan, and barley beta-glucan, which are substrates for CelK. It does not bind to xylan, galactomannan, and carboxymethyl cellulose. The CBD(CelK) contains 1 mol of calcium per mol. The CBD(CelK) has three thiol groups and one disulfide, reduction of which results in total loss of cellulose-binding ability. To reveal amino acid residues important for biological function of the domain and to investigate the role of calcium in the CBD(CelK) four highly conserved aromatic residues (Trp(56), Trp(94), Tyr(111), and Tyr(136)) and Asp(192) were mutated into alanines, giving the mutants W56A, W94A, Y111A, Y136A, and D192A. In addition 14 N-terminal amino acids were deleted, giving the CBD-N(CelK). The CBD-N(CelK) and D192A retained binding parameters close to that of the intact CBD(CelK), W56A and W94A totally lost the ability to bind to cellulose, Y136A bound to both ASC and BMCC but with significantly reduced binding capacity and K(r) and Y111A bound weakly to ASC and did not bind to BMCC. Mutations of the aromatic residues in the CBD(CelK) led to structural changes revealed by studying solubility, circular-dichroism spectra, dimer formation, and aggregation. Calcium content was drastically decreased in D192A. The results suggest that Asp192 is in the calcium-binding site of the CBD(CelK) and that calcium does not affect binding to cellulose. The 14 amino acids from the N terminus of the CBD(CelK) are not important for binding. Tyr136, corresponding to Cellulomonas fimi CenC CBD(N1) Y85, located near the binding cleft, might be involved in the formation of the binding surface, while Y111, W56A, and W94A are essential for the binding process by keeping the CBD(CelK) correctly folded.

Characterization of the cellulose-binding ability of Geotrichum sp. M111 cells and its application to dehydration of the distilled waste of sweet potato shouchu.

The cellulose-binding ability of Geotrichum sp. M111 cells was investigated by the micro-tube method which gives an indication of the binding ability of M111 cells. The optimum pH value and temperature were 3-7 and below 50 degrees C, respectively, from measurement of the aggregation height for a mixture of cellulose powder and M111 cells. The binding constant of 0.3% for M111 cells to cellulose powder was obtained in a 20 mm citrate buffer of pH 5.0 at 30 degrees C. Aggregation was inhibited by such surfactants as sodium dodecylsulfate. The binding ability of M111 cells to cellulose fiber disappeared after a treatment with Driselase or Pronase E. This suggests that the binding ability might be related to the cell surface proteins. The dehydration rate of the distilled waste of sweet potato shouchu was accelerated by the addition of M111 cells. The analysis of dehydration by a linear viscoelastic model suggests that the acceleration effect might have been due to the space increase between cellulose fibers with the cell addition.

Isolation and properties of a cellulosome-type multienzyme complex of the thermophilic Bacteroides sp. strain P-1.

The extracellular form of cellulosome-type multienzyme complex of thermophilic Bacteroides sp. strain P-1 which was isolated from the anaerobic digester, is described. Multienzyme complex was isolated from the culture supernatant by an adsorption-desorption affinity chromatography on microcrystalline cellulose. The isolated multienzyme complex was found to form a complex that exhibited a high molecular weight (estimated at more than 1400 kDa) and was quite stable, requiring strong denaturing condition for dissociation. Polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulphate resolved multienzyme complex into at least 12 subunits with the molecular weight range of 49 to 209 kDa, respectively. The isolated multienzyme complex showed cellulose-binding ability, cellulase and xylanase activities and effected the hydrolysis of crystalline cellulose and lignocellulosic materials in the form of corncob, corn hull, rice straw, and sugarcane bagasse.

Identification of the cellulose-binding domain of Fibrobacter succinogenes endoglucanase F

The cellulose-binding domain (CBD) of Fibrobacter succinogenes endoglucanase F (EGF) has been determined. The gene encoding EGF ( celF) and its derivatives were expressed in Escherichia coli. We were able to obtain eight recombinant proteins and examine their cellulose-binding ability and endoglucanase activity. Because four recombinant proteins, which contain the first N-terminal reiterated region of EGF, bound to cellulose, the region has been identified as the CBD. Although the CBD did not show significant sequence similarity with any other CBDs, it did show significant similarity with a part of endoglucanase J (CelJ) of Clostridium thermocellum F1. Moreover, a large part of the C-terminal catalytic region of EGF showed sequence similarity with α- L-arabinofuranosidases of glycosyl hydrolase family 51.