Cell Wall Thickness Research Articles

CapD deletion in the Elizabethkingia miricola capsular locus leads to capsule production deficiency and reduced virulence

Abstract Elizabethkingia miricola is a multidrug-resistant pathogen that can cause life-threatening infections in immunocompromised humans and outbreaks in amphibians. However, the specific virulence factors of this microorganism have not been described. In this study, we identified the polysaccharide biosynthesis protein-encoding gene capD, which is located in the conserved region of the Wzy-dependent capsule synthesis gene cluster in the E. miricola strain FL160902, and investigated its role in the pathogenesis of E. miricola. Our results revealed that the capD deletion strain (ΔcapD) lost its typical encapsulated structure, with a 45% reduction in cell wall thickness. CapD affects wza expression in the capsule polysaccharide synthesis pathway. Furthermore, the survival rates were significantly reduced in ΔcapD in response to complement-mediated killing, desiccation stress, and macrophage phagocytosis, whereas biofilm formation, surface hydrophobicity, and adherence to both endothelial and epithelial cells were increased. Additionally, the deletion of capD sharply attenuated the virulence of E. miricola in a frog infection model. Complementation of the capD gene restored the biological properties and virulence to wild-type levels. Overall, these findings suggest that CapD contributes to polysaccharide synthesis and plays a crucial role in the pathogenesis of E. miricola.

Pressure-tolerant survival mechanism of Schizophyllum commune 20R-7-F01 isolated from deep sediments 2 kilometers below the seafloor

In anaerobic high hydrostatic pressure (HHP) sedimentary environments below the seafloor, fungi are found to dominate the eukaryotic communities, playing crucial ecological roles. However, the specific mechanisms by which fungi adapt to anaerobic HHP environments remain unclear. In this study, we investigated Schizophyllum commune 20R-7-F01 isolated from coal-bearing sediments at a depth of 2 km below the seafloor. By assessing the cell viability, biomass, and cell wall thickness changes of strain 20-7-1 under different HHP conditions, we observed that, compared to 0.1 MPa, strain 20-7-1 exhibited slower growth rates and decreased cell viability at 15 MPa and 35 MPa, yet demonstrated significant pressure tolerance. Transcriptomic and metabolomic analyses revealed that this strain activated the carbohydrate metabolic process to simultaneously utilize ethanol and lactic acid fermentation pathway. Additionally, it activates the oxidoreductase activity and hydrolase activity pathways to detoxify intracellular reactive oxygen species (ROS). Activation of the metal ion binding pathway increases the proportion of unsaturated fatty acids in the cell membrane, while instigation of the integral component of membrane pathway maintains cell wall structural stability. Furthermore, activation of the DNA repair pathway repairs DNA damage, demonstrating its comprehensive adaptive mechanisms against the HHP stress. These research findings deepen our understanding of fungal survival strategies and adaptation mechanisms in extreme environments, laying the groundwork for further exploration of their roles in cycling of carbon, nitrogen, sulfur, and other elements in the deep biosphere.

Integrative DNA methylome and transcriptome analysis illuminate leaf phenotype alterations in tetraploid citrus

Whole-genome duplication (WGD) in plants triggers profound morphological and physiological changes, with DNA modification being a key epigenetic factor that helps neo-polyploids overcome challenges and gain adaptive advantages. Tetraploids were previously mined from diploid citrus seedlings, showing enhanced environmental adaptability and potential as rootstocks. These tetraploids exhibited increased leaf and cell wall thickness compared to their diploid counterparts. To explore the impact of WGD, transcriptomic and whole-genome bisulfite sequencing (WGBS) were conducted on two pairs of citrus tetraploids and their diploid controls, revealing significant molecular changes. Notably, tetraploid citrus displayed lower CG methylation levels in gene and transposable element (TE) bodies relative to diploids. Differentially methylated genes (DMGs) between tetraploids and diploids were primarily associated with immune stress, organ development, metabolic pathways, and secondary metabolism. In Trifoliate orange (Poncirus trifoliata L. Raf.) and Ziyang Xiangcheng (Citrus junos Sieb. ex Tanaka), only 150 and 58 differentially expressed genes (DEGs) were identified, respectively, with enrichment in critical cellular processes such as cell wall synthesis, plastid development, and pathways modulating chloroplasts and plasma membranes. A total of 70 genes showed both differential methylation and expression, including ACN1, Nac036, and ASMT1, which are involved in stomatal development, leaf morphology, and melatonin synthesis, respectively, offering insight into the regulatory mechanisms of phenotype alterations after polyploidization. These findings reveal the epigenetic modifications in polyploid citrus and highlight the role of polyploidization-induced methylation in driving phenotypic changes.

Susceptibility of Different Aesculus Species to the Horse Chestnut Leaf Miner Moth: Chemical Composition and Morphological Features of Leaves

The susceptibility of seven species of chestnuts to the horse chestnut leaf miner was studied in the arboretum of the Main Botanical Garden of the Russian Academy of Sciences (MBG RAS), taking into account their interspecific characteristics. Using pheromone delta traps, the highest number of Cameraria ohridella moths was shown for Aesculus hippocastanum and the lowest for Aesculus chinensis. A number of anatomical parameters of leaves were investigated, such as the thickness of the epidermal cell wall and the thickness of the palisade and spongy parenchyma layers. As a result, it was shown that the most infected chestnut species had a greater thickness of the nutritious parenchyma tissue. No dependence was found between the degree of susceptibility to the horse chestnut leaf miner and such indicators as the content of chlorophyll a + b and carotenoids in the leaves of seven species of chestnuts. Nevertheless, resistance of different species of the genus Aesculus to Cameraria ohridella under increased tannin content in leaves has been shown. Evaluation of phenolic compounds and flavonoids has not established their reliable role as repellents. The high levels of carbohydrates found during the study contributed to increased susceptibility to the horse chestnut leaf miner.

Histochemical and gene expression changes in Cannabis sativa hypocotyls exposed to increasing concentrations of cadmium and zinc

Hemp (Cannabis sativa L.) is a versatile crop that produces cellulosic bast fibres used in textiles and biocomposites. Is also finds use in phytoremediation, being a good candidate for the cultivation on marginal lands, such as those contaminated by heavy metals (HMs). HMs like cadmium (Cd) and zinc (Zn) are known to affect plant growth and impair the biosynthesis of cellulose and lignin at the cell wall level. Since cellulose is the major component in the gelatinous layer of bast fibres, HMs can impact the structure of hemp fibres and, consequently, their mechanical properties. This study investigates how varying concentrations of Cd and Zn in the soil affect the bast fibres of hemp plantlets. The chosen model is the hypocotyl, as it is ideal for studying bast fibre development: it exhibits a temporal separation between the elongation and thickening phases within a short period of approximately three weeks. C. sativa plantlets were grown for 20 days, and the hypocotyls sampled to perform histochemical observations, gene expression analysis, as well as to quantify biomass yield and Cd/Zn accumulation. Hemp plantlets grown in soils with the three highest Zn concentrations were smaller than the control group, whereas no decrease in size was observed under elevated Cd concentrations. However, at the highest Cd concentration, the root system exhibited enhanced development, accompanied by a significant increase in dry weight across all the concentrations tested. The quantification of Cd and Zn showed that the roots were the main organs accumulating HMs. Cd at the two highest concentrations decreased significantly the lumen area of bast fibres and increased their cell wall thickness. Zn decreased significantly the lumen area, but it did not impact the thickness of the cell wall at the highest concentration. Cd also increased the number of secondary fibres. Immunohistochemistry highlighted a different pattern of crystalline cellulose distribution with a signal that was less homogeneous in the presence of Cd and Zn. Gene expression analysis revealed changes in transcripts encoding cellulose synthases, fasciclin-like arabinogalactan proteins, class III peroxidases. The results obtained shed light on the molecular response and bast fibre histological changes occurring in young hemp plants exposed to Cd and Zn.

Eggplant NAC domain transcription factor SmNST1 as an activator promotes secondary cell wall thickening.

NAC-domain transcription factors (TFs) are plant-specific transcriptional regulators playing crucial roles in plant secondary cell wall (SCW) biosynthesis. SCW is important for plant growth and development, maintaining plant morphology, providing rigid support, ensuring material transportation and participating in plant stress responses as a protective barrier. However, the molecular mechanisms underlying SCW in eggplant have not been thoroughly explored. In this study, the NAC domain TFs SmNST1 and SmNST2 were cloned from the eggplant line 'Sanyue qie'. SmNST1 and SmNST2 expression levels were the highest in the roots and stems. Subcellular localization analysis showed that they were localized in the cell membrane and nucleus. Their overexpression in transgenic tobacco showed that SmNST1 promotes SCW thickening. The expression of a set of SCW biosynthetic genes for cellulose, xylan and lignin, which regulate SCW formation, was increased in transgenic tobacco. Bimolecular fluorescence and luciferase complementation assays showed that SmNST1 interacted with SmNST2 in vivo. Yeast one-hybrid, electrophoretic mobility shift assay (EMSA) and Dual-luciferase reporter assays showed that SmMYB26 directly bound to the SmNST1 promoter and acted as an activator. SmNST1 and SmNST2 interact with the SmMYB108 promoter and repress SmMYB108 expression. Altogether, we showed that SmNST1 positively regulates SCW formation, improving our understanding of SCW biosynthesis transcriptional regulation.

Genome-wide identification and expression analysis of SpUGE gene family and heterologous expression-mediated Arabidopsis thaliana tolerance to Cd stress

The UDP-glucose 4-epimerase (UGE) enzyme plays a critical role in plant growth and responses to abiotic stressors, such as heavy metal exposure. However, UGE-mediated remodeling of cell wall polysaccharides in response to these stressors remains poorly understood in willow. This study investigated the structure, function, and expression patterns of the UGE gene family in willow, focusing on cadmium treatment to elucidate how SpUGE1 enhances Cd resistance. Six SpUGE genes were identified through whole-genome sequencing and bioinformatics analysis, and they were mapped across five chromosomes. Quantitative PCR analysis revealed that, with the exception of SpUGE3, all genes showed their highest relative expression in the leaves. Under Cd treatment, members of the SpUGE gene family displayed varying levels of responsiveness, with SpUGE1 showing a marked increase in expression over time. In transgenic Arabidopsis thaliana overexpressing SpUGE1, the cellulose, hemicellulose, lignin, and pectin content significantly increased, with cellulose levels rising by >50 % and pectin by approximately 30 %. This overexpression conferred enhanced Cd resistance by increasing cell wall thickness through elevated cell wall polysaccharides, which reduced Cd uptake. Consequently, Cd content in the cell wall, chloroplasts, and mitochondria was significantly lower than that in wild-type plants, reducing cellular damage and improving Cd resistance. Overall, this study provides valuable theoretical and experimental insights into the role of the SpUGE1 gene family in willow.

Genomic characterization and comparative genomics of Chlorella sp. CH2018 from Musi River water, India

Microalgae, a diverse class of photosynthetic eukaryote, can provide food and energy sustainably. Selecting productive strains is crucial for commercial viability. Here, we isolated an axenic microalgal species from Musi River water, and based on its morphology, molecular makeup, and cell wall composition identified it as Chlorella sp. CH2018. Scanning electron microscopy was used to measure the size of cells, which were found to be 3-, 4-, or 5-μm in diameter with a discernible thick outer cell wall. The characterization of algal genomes is imperative for comprehending species, studying metabolic pathways, and modifying genetics. In this study, we sequenced the entire genome of Chlorella sp. CH2018, yielded genome size of 56.83 Mb with 11,143 functionally annotated protein-coding gene models. The Gene Ontology (GO) analysis revealed that Chlorella's predominant metabolic pathway is carbohydrate metabolism. Ortholog comparative analysis of species of phylum Chlorophyta with Chlorella sp. CH2018 showed that the isolated species possesses unique protein families with a maximum number of 6292 ortholog groups with Chlorella sorokiniana. The phylogenetic tree created by concatenating single-copy ortholog sequences demonstrates the uniqueness of Chlorella sp. CH2018, and its genome sequence serves as a genetic resource for future research.

Low-velocity crashworthiness and optimization of a crash box filled with modularized graded honeycomb

PurposeGraded honeycombs are materials that exhibit better energy absorption performance compared to uniform honeycombs without adding additional weight. This paper introduces a novel modularized graded honeycomb into a commercial crash box to improve its crashworthiness.Design/methodology/approachA modularized graded honeycomb is inserted into a commercial crash box to develop a novel crash box. Finite element analyses are conducted to investigate the crashworthiness. Pareto cumulative influence analysis is conducted to rank the effects of design parameters on crashworthiness. A surrogate model-based multi-objective optimization is carried out to improve energy absorption while limiting the impact peak force. An optimal Pareto solution set is obtained.FindingsModularized honeycomb-filled crash box outperforms that of its corresponding uniform honeycomb-filled crash box and empty crash box in resisting impact. Pareto cumulative influence analysis reveals that for most crashworthiness indicators, cell-wall thicknesses of crash box tube contribute the most, followed by average relative density and graded coefficient of modularized honeycomb (MH). Graded coefficient contributes nearly 10% on mean force and maximum displacement, but it has insignificant influence on peak force and weight. Optimization results show that the optimal designs can not only absorb more energy but also limit the peak force compared with those of uniform honeycomb-filled crash box.Originality/valueThis paper fills a MH into a commercial crash box to propose a novel crash box and demonstrates the positive impact of modularized design on crashworthiness compared with that of uniform honeycomb-filled crash box. Moreover, modularizing honeycomb does not change the weight of the filler, and thus, the novel crash box would benefit development of crash box with lightweight and excellent energy absorption capacity.

Mechanism of Exogenous Jasmonic Acid-Induced Resistance to Thrips palmi in Hemerocallis citrina Baroni Revealed by Combined Physiological, Biochemical and Transcriptomic Analyses

Jasmonic acid (JA) is a regulator of plant resistance to phytophagous insects, and exogenous JA treatment induces plant insect resistance. This study investigated the mechanism of exogenous JA-induced resistance of Hemerocallis citrina Baroni (daylily) to Thrips palmi at the biochemical and molecular levels. Daylily leaves sprayed with JA showed significantly higher levels of secondary metabolites—tannins, flavonoids, and total phenols, and activity of defense enzymes—peroxidase, phenylalanine ammonia lyase, polyphenol oxidase, and protease inhibitor (PI) than control leaves; the most significant effects were observed with 1 mmol L−1 JA. Owing to an improved defense system, significantly fewer T. palmi were present on the JA-treated plants than control plants. The JA-treated leaves had a smoother wax layer and fewer stomata, which was unfavorable for insect egg attachment. The differentially expressed genes (DEGs) were significantly enriched in insect resistance pathways such as lignin and wax biosynthesis, cell wall thickening, antioxidant enzyme synthesis, PI synthesis, secondary metabolite synthesis, and defense hormone signaling. A total of 466 DEGs were predicted to be transcription factors, mainly bHLH and WRKY family members. Weighted gene co-expression network analysis identified 13 key genes; TRINITY_DN16412_c0_g1 and TRINITY_DN6953_c0_g1 are associated with stomatal regulation and lipid barrier polymer synthesis, TRINITY_DN7582_c0_g1 and TRINITY_DN11770_c0_g1 regulate alkaloid synthesis, and TRINITY_DN7597_c1_g3 and TRINITY_DN1899_c0_g1 regulate salicylic acid and ethylene biosynthesis. These results indicate that JA treatment of daylily improved its resistance to T. palmi. These findings provide a scientific basis for the utilization of JA as an antagonist to control T. palmi in daylily.

PbAGL7-PbNAC47-PbMYB73 complex coordinately regulates PbC3H1 and PbHCT17 to promote the lignin biosynthesis in stone cells of pear fruit.

Lignification of the cell wall in pear (Pyrus) fruit results in the formation of stone cells, which affects the texture and quality of the fruit. However, it is still unclear that how different transcription factors (TFs) work together to coordinate the synthesis and deposition of lignin. Here, we examined the transcriptome of pear varieties with different stone cell contents and found a key TF (PbAGL7) that can promote the increase of stone cell contents and secondary cell wall thicknesses. In addition, PbAGL7 can facilitate the expression level of lignin biosynthesis-related genes and accelerate the lignin biosynthesis in pear fruit and Arabidopsis. However, PbAGL7 did not directly bind to the promoters of PbC3H1 and PbHCT17 which are crucial genes involved in lignin biosynthesis. On the other hand, yeast two-hybrid (Y2H) library showed that PbNAC47 and PbMYB73 interacted with PbAGL7 in the nucleus. PbNAC47 and PbMYB73 also increased the stone cell and lignin contents, and upregulated the expressions of PbC3H1 and PbHCT17 by binding to the SNBE and AC elements, respectively. Moreover, PbNAC47 also interacted with PbMYB73 to form PbAGL7-PbNAC47-PbMYB73 complex. This complex significantly activated the expression levels of PbC3H1 and PbHCT17 and promoted lignin biosynthesis to form stone cells in pear fruit. Overall, our study provides new insights into the molecular mechanism of TFs that coordinately regulate the stone cell formation in pear fruit and extend our knowledge to understand cell wall lignification in plants.

PBP4 is required for serum-induced cell wall thickening and antibiotic tolerance in Staphylococcus aureus.

The bacterial pathogen Staphylococcus aureus responds to the host environment by synthesizing a thick peptidoglycan cell wall, which protects the bacterium from membrane-targeting antimicrobials and the immune response. However, the proteins required for this response were previously unknown. Here, we demonstrate by three independent approaches that the penicillin-binding protein PBP4 is crucial for serum-induced cell wall thickening. First, mutants lacking various non-essential cell wall synthesis enzymes were tested, revealing that a mutant lacking pbp4 was unable to generate a thick cell wall in serum. This resulted in reduced serum-induced tolerance of the pbp4 mutant toward the last resort antibiotic daptomycin relative to wild-type cells. Second, we found that serum-induced cell wall thickening occurred in each of a panel of 134 clinical bacteremia isolates, except for one strain with a naturally occurring mutation that results in an S140R substitution in the active site of PBP4. Finally, inhibition of PBP4 with cefoxitin prevented serum-induced cell wall thickening and the resulting antibiotic tolerance in the USA300 strain and clinical MRSA isolates. Together, this provides a rationale for combining daptomycin with cefoxitin, a PBP4 inhibitor, to potentially improve treatment outcomes for patients with invasive MRSA infections.

Study on foaming behavior of block copolymer/inorganic particles co‐construction of toughened epoxy resin foams

AbstractLow toughness and brittleness limit its application range of thermosetting epoxy resin (EP) based foams. In current research, inorganic particles are commonly utilized as heterogeneous nucleating agents to enhance foaming quality and EP toughness. However, the increasing inorganic particle content usually leads to particle agglomeration, which negatively impacts foaming quality and reduces EP performance. Block copolymers, which appear as liquid to effectively mitigate agglomeration, are employed as toughening materials for EP. In this study, a small number of modified calcium silicate particles (MCS) were used as anchor points to induce the distribution of block copolymers (P‐F68) to improve EP toughness and effectively enhance cell nucleation, thus, EP/MCS/P‐F68 foams performance was improved. The research results showed that EP foams obtained excellent cell structure and very small foam density (0.256 g/cm3) at the P‐F68 content of 10 wt%. The continuous increase of P‐F68 content would lead to the thickening of cell wall and the increase of cell size. Simultaneously, the core‐shell structure formed by P‐F68 in EP effectively enhanced the toughness of EP foams and mitigated its brittleness, offering crucial theoretical guidance for toughening and regulating the cell structure of EP foams.

GhGRF4/GhARF2-GhGASA24 module regulates fiber cell wall thickness by modulating cellulose biosynthesis in upland cotton (Gossypium hirsutum).

Fiber elongation rate is an essential characteristic of cotton fiber in the textile industry, yet it has been largely overlooked in genetic studies. Gibberellins (GAs) and auxin (IAA) are recognized for their role in directing numerous developmental processes in plants by influencing cell differentiation and elongation. However, the degree to which GA-IAA interaction governs cellular elongation in cotton fiber cells remains to be fully understood. In this study, we identified a causal gene, Gibberellic Acid-Stimulated in Arabidopsis 24 (GhGASA24), that appears to be responsible for fiber elongation rate via regulating fiber cell wall thickness. Subsequent experiments revealed that GhGASA24 influences cell wall formation by promoting the expression of GhCesA8 and GhCesA10. Our findings suggest that Auxin Response Factor 2 (GhARF2) regulates fiber elongation rate by directly binding to the AuxRE elements in GhGASA24 promoter. In addition, we identified Growth Regulation Factor 4 (GhGRF4) as a transcription factor that interacts with GhARF2 to form a heterodimer complex, which also transcriptionally activates GhGASA24. Intriguingly, GhGRF4 regulates GhARF2 expression by directly binding to its promoter, thereby acting as a cascade regulator to enhance the transcriptional levels of GhGASA24. We propose that the GhGRF4/GhARF2-GhGASA24-GhCesAs module may contribute to fiber cell wall thickness by modulating cellulose biosynthesis, and provide a theoretical basis for improvement of fiber quality.

Biochar addition enhances remediation efficiency and rapeseed yield in copper-contaminated soil.

Soil contamination with copper (Cu) threatens ecological security and human health. Rapeseed demonstrates potential in remediating copper-contaminated soil, and biochar-assisted phytoremediation is increasingly being employed to improve remediation efficiency. However, the combined application of them has not been thoroughly studied in terms of the synergistic effects and the mechanisms of their interaction. In this regard, this study conducted a pot experiment to evaluate biochar-assisted remediation under Cu-contaminated soil with varying biochar application rates; Furthermore, the plant physiological mechanism and soil physicochemical properties involved in the biocharrapeseed system was explored. Our results showed that the exchangeable pool of copper in soil decreased by 10.0% and 12.3% with adding 5% biochar (BC1) and 10% biochar (BC2) relative to control (BC0), respectively, prior to rapeseed cultivation. The rapeseed cultivation for one season further reclaimed 4.9%, 9.0%, and 13.6% of the available copper in this soil by root extraction under the BC0, BC1, and BC2 treatments, respectively. The overall copper concentration in plants decreased by 23.7% under BC2 and 13.3% under BC1 compared to BC0. However, the plant's dry biomass at BC1 and BC2 treatments increased by 1.7-fold and 2.7-fold relative to BC0, which offset the negative impact of the decreased copper concentration on phytoremediation. Physiological analysis showed adding 10% biochar decreased the MDA content by 36% in the leaf and 49% in the root, compared to BC0. The transmission electron microscopy for cell wall ultrastructure in root tips showed that biochar addition in Cu-contaminated soil increased the mechanical strength of the celL wall, explicitly increasing the thickness of the secondary cell wall. Further cell wall components analysis revealed a remarkable increment of the pectin content in BC2 relative to BC0, increased by 56% in the leaf and 99% in the root, respectively. Additionally, 10% biochar application led to a roughly 2-fold increase in seed yield via ameliorating the soil physicochemical properties and increasing the rapeseed growth. These findings offer insights into synergistic rapeseed-biochar use for Cu-contaminated soil remediation.

A preliminary investigation of banana pseudo-stem (Musa cavendish) for pulp and paper production: morphology, chemical composition, FTIR, XRD and thermogravimetric analysis

Abstract In today’s world, the use of paper and cardboard increasing but the availability of raw materials and the environmental impact on the paper industry is a big concern. To address these concerns, researchers are exploring the potential of agricultural waste products as raw materials for pulp production. This study uses morphological, chemical composition, FTIR, XRD, and thermogravimetric analysis to examine the potential of banana pseudo-stem as a raw material for paper pulp to address environmental concerns and raw material shortages in the paper industry. The study reveals favorable characteristics for papermaking, including long fiber length (1750 μm), thin cell wall thickness (9.7 μm), and large lumen diameter (22.15 μm). The chemical composition of banana pseudo-stem contains cellulose (44.93 %), hemicellulose (23.7 %), and Klason lignin (11.1) showing its suitability for pulp production. FTIR analysis highlights the functional groups present on the banana pseudo-stem. The XRD analysis shows that it has a similar cellulosic peak and crystallinity index with common raw materials used in pulp production. The thermogravimetric analysis shows that the banana pseudo-stem has high thermal stability. The findings demonstrate that banana pseudo-stem, both by itself and in combination with other raw materials, might be a potential raw material for the pulp production.

Optimization of Triply Periodic Minimal Surface Heat Exchanger to Achieve Compactness, High Efficiency, and Low-Pressure Drop

With advancements in additive manufacturing (AM) techniques, high-quality triply periodic minimal surface (TPMS) structures can now be produced. TPMS walled heat exchangers (HX) hold significant potential for industrial applications and are receiving increasing attention. This paper explores the impact of various TPMS design variables on flow and thermal performance to optimize TPMS heat exchangers for compactness, high efficiency, and low pressure drop. The design variables examined include the type of TPMS lattice, unit cell size, wall thickness, aspect ratio, TPMS orientation, and equivalent thickness. The study reveals that the flow and heat transfer performance of TPMS structures are significantly affected by these design variables. For the Gyroid, Diamond, and SplitP lattices, performance is nearly identical when the surface-to-volume ratio is kept constant. The average velocity of the fluid in the TPMS HX should be 0.3 m/s. The corresponding Re is between 300~800. Thin wall thickness, small equivalent thickness, and flat lattice configurations can significantly reduce pressure drop while maintaining the overall heat transfer coefficient. Additionally, the angle between the flow direction and TPMS orientation can increase pressure drop. Three aluminum heat exchangers were successfully printed using an AM machine, and testing results are comparable with theoretical prediction.

Production and characterization of pulp and paper from flax straw

Flax (Linum usitatissimum) is a bast fiber plant known for its long fibers, making it an excellent source of pulp for paper production. In Ethiopia, flax is primarily cultivated for oil, with the residual straw utilized for papermaking. This study focuses on pulping flax straw using the Kraft process and investigates its chemical composition, proximate analysis, and morphological properties. The proximate analysis revealed an ash content of 4.13% and moisture content of 11%. Chemical composition analysis showed cellulose at 51.34%, hemicellulose at 25.20%, lignin at 14.12%, ash at 4.13%, and extractives at 5.21%. The morphological properties included a fiber length of 1.41 mm, diameter of 16.78 μm, lumen width of 9.45 μm, and cell wall thickness of 3.77 μm. Flax straw exhibited an acceptable Runkel ratio (0.8) and flexibility coefficient (56.32), placing it within the range of non-wood fibers. SEM analysis of the pulp’s morphology was conducted to assess fiber structure, including the presence of cracks. Pulp quality and length are directly linked to paper strength. Various pulping conditions were studied using a full-factorial design, with optimum conditions being 10% alkaline, 131.74°C, and 120 min of cooking time, yielding a pulp with a Kappa number of 10.45 and a yield of 40.56%. The resulting paper demonstrated standard tensile, tearing, and burst strengths, indicating that flax straw is a promising raw material for paper production.

Physiological and biochemical responses in a cadmium accumulator of traditional Chinese medicine Ligusticum sinense cv. Chuanxiong under cadmium condition

Ligusticum sinense cv. Chuanxiong (L. Chuanxiong), one of the widely used traditional Chinese medicines (TCM), is currently facing the problem of excessive cadmium (Cd) content. This problem has significantly affected the quality and safety of L. Chuanxiong and become a vital factor restricting its clinical application and international trade development. Currently, to solve the problem of excessive Cd, it is essential to research the response mechanisms of L. Chuanxiong to Cd stress. However, there are few reports on its physiological and biochemical responses under Cd stress. In this study, we conducted the hydroponic experiment under 25 μM Cd stress, based on the Cd content of the genuine producing areas soil. The results showed that 25 μM Cd stress not only had no significant inhibitory effect on the growth of L. Chuanxiong seedlings but also significantly increased the chlorophyll a content (11.79%) and root activity (51.82%) compared with that of the control, which might be a hormesis effect. Further results showed that the absorption and assimilation of NH4+ increased in seedlings under 25 μM Cd stress, which was associated with high photosynthetic pigments. Here, we initially hypothesized and confirmed that Cd exceedance in the root system of L. Chuanxiong was due to the thickening of the root cell wall, changes in the content of the cell wall components, and chelation of Cd by GSH. There was an increase in cell wall thickness (57.64 %) and a significant increase in cellulose (25.48%) content of roots under 25 μM Cd stress. In addition, L. Chuanxiong reduced oxidative stress caused by 25 μM Cd stress mainly through the GSH/GSSG cycle. Among them, GSH-Px (48.26%) and GR (42.64%) activities were significantly increased, thereby maintaining a high GSH/GSSG ratio. This study preliminarily reveals the response of L. Chuanxiong to Cd stress and the mechanism of Cd enrichment. It provides a theoretical basis for solving the problem of Cd excessive in L. Chuanxiong.Graphical Physiological and biochemical mechanisms of L. Chuanxiong seedlings under Cd stress.

In-plane crushing behavior and energy absorption of CFRP honeycombs with different core topologies

The in-plane crushing behavior and energy absorption performance of carbon fiber reinforced polymer (CFRP) honeycombs with different core topologies were experimentally investigated under uniaxial loading conditions. Three types of CFRP honeycomb core topologies (i.e. circular, square and hexagonal) with different cell wall thicknesses and heights were considered in the designs. The honeycomb samples were fabricated by the molding and bonding process, which is widely used in the easy, fast and economical manufacturing of thin-walled honeycomb structures. A total of twenty-seven sample groups were experimentally tested for each loading condition, in which honeycomb samples with different core topologies were designed to have almost the same weights for a meaningful comparison. The experimental results revealed that all honeycomb designs have higher in-plane compression strength in the expansion direction, and hexagonal honeycombs showed the highest strength and energy absorption performance in both directions due to their stable load-carrying capacity and outstanding force efficiency. In particular, the experimental findings showed that the crushing strength and the specific energy absorption of CFRP honeycomb structures can be improved up to 6.1 and 4.2 times, respectively, by properly adjusting the cell wall thickness and height parameters. The results also revealed that the proposed lightweight CFRP honeycombs with the structural densities of 155–283 kg/m3 showed better in-plane crushing performance than many competing cellular topologies.