Cell Wall Layers Research Articles

NOD2-mediated dual negative regulation of inflammatory responses triggered by TLRs in the gastrointestinal tract.

Loss-of-function mutations in nucleotide-binding oligomerization domain 2 (NOD2) constitute the primary risk factors for Crohn's disease. NOD2 is an intracellular sensor for muramyl dipeptide (MDP), a small molecule derived from the peptidoglycan layer of bacterial cell wall. Although NOD2 is involved in host immune responses, much attention has been paid to the involvement of NOD2 in the maintenance of intestinal homeostasis. Despite the fact that the proinflammatory cytokine and chemokine responses induced by NOD2 activation alone are weaker than those induced by toll-like receptors (TLRs), NOD2 plays a crucial role in host defense against invading pathogens and in the regulation of immune responses. Recent studies have highlighted the importance of negative regulatory functions of NOD2 in TLRs-mediated proinflammatory cytokine responses. MDP-mediated activation of NOD2 induces interferon regulatory factor 4 (IRF4) expression, thereby suppressing nuclear factor-κB-dependent colitogenic cytokine responses through the inhibition of Lys(K)63-linked polyubiquitination on receptor-interacting serine/threonine protein kinase 2. MDP-mediated activation of NOD2 also downregulates TLR9-induced type I IFN responses by inhibiting the K63-linked polyubiquitination of TNF receptor-associated factor 3 via deubiquitinating enzyme A (DUBA) expression. Thus, NOD2 exerts dual negative regulation of TLRs-mediated proinflammatory cytokine and type I IFN responses by inducing the expression of IRF4 and DUBA, respectively. In this review, we summarize the molecular mechanisms whereby NOD2 activation suppresses TLRs-mediated proinflammatory and type I IFN responses. In addition, we discuss the clinical relevance of the NOD2-mediated negative regulation of TLRs in inflammatory bowel disease.

Investigating the Impact of Flavonoids on Aspergillus flavus: Insights into Cell Wall Damage and Biofilms.

Aspergillus flavus, a fungus known for producing aflatoxins, poses significant threats to agriculture and global health. Flavonoids, plant-derived compounds, inhibit A. flavus proliferation and mitigate aflatoxin production, although the precise molecular and physical mechanisms underlying these effects remain poorly understood. In this study, we investigated three flavonoids-apigenin, luteolin, and quercetin-applied to A. flavus NRRL 3357. We determined the following: (1) glycosylated luteolin led to a 10% reduction in maximum fungal growth capacity; (2) quercetin affected cell wall integrity by triggering extreme mycelial collapse, while apigenin and luteolin caused peeling of the outer layer of cell wall; (3) luteolin exhibited the highest antioxidant capacity in the environment compared to apigenin and quercetin; (4) osmotic stress assays did not reveal morphological defects; (5) flavonoids promoted cell adherence, a precursor for biofilm formation; and (6) RNA sequencing analysis revealed that flavonoids impact expression of putative cell wall and plasma membrane biosynthesis genes. Our findings suggest that the differential effects of quercetin, luteolin, and apigenin on membrane integrity and biofilm formation may be driven by their interactions with fungal cell walls. These insights may inform the development of novel antifungal additives or plant breeding strategies focusing on plant-derived compounds in crop protection.

Alcoholysis-induced changes in cell wall surfaces: Structural insights for the effective delignification of lignocellulosic biomass

Alcoholysis (organosolv delignification)-induced changes in cell wall surfaces were investigated to verify whether structural assessments are required for effective delignification. Softwood blocks of Cryptomeria japonica were subjected to alcoholysis at 100–150 °C, which gradually decreased their lignin content. Scanning electron microscopy revealed the emergence of amorphous mesh structures on the intercellular side and their transformation into spherical particles with increasing temperature. In addition, warty layers changed from uneven structures into spherical particles on the lumen side of tracheids. These particles produced in cell walls under harsh alcoholysis conditions, damaging the cell wall layers on both sides. Confocal laser scanning microscopy identified that they were mainly lignin eluted by alcoholysis. Alcoholysis at 130 °C providing the largest specific surface area showed intermediate stages of growth into spherical particles but allowed complete delignification when combined with NaClO2 bleaching. Therefore, the role of the spherical particles, which has so far been debatable, was clarified as causing damage rather than a bleaching accelerant. Focusing only on compositional changes while ignoring structural ones leads to the incorrect identification of optimal conditions that remove lignin but damage the cell walls. Our findings demonstrate that structural considerations are required for effective and noninvasive delignification.

NST3 induces ectopic transdifferentiation, forming secondary walls with diverse patterns and composition in Arabidopsis thaliana.

The master transcription factor NAC SECONDARY WALL THICKENING PROMOTING FACTOR3 (NST3), also known as SND1, plays a pivotal role in regulating secondary cell wall (SCW) development in interfascicular and xylary fibers in Arabidopsis thaliana. Despite progress in understanding SCW assembly in xylem vessel-like cells, the mechanisms behind its assembly across different cell types remain unclear. Overexpressing NST3 or its homolog NST1 leads to reduced fertility, posing challenges for studying their impact on secondary wall formation. This study aimed at developing a tightly regulated dexamethasone (DEX)-inducible expression system for NST3 and NST1 to elucidate the structure and assembly of diverse SCWs. Using the DEX-inducible system, we characterized ectopically formed SCWs for their diverse patterns, mesoscale organization, cellulose microfibril orientation, and molecular composition using spinning disk confocal microscopy, field emission scanning electron microscopy (FESEM), vibrational sum-frequency generation (SFG) spectroscopy and, histochemical staining and time-of-flight secondary ion mass spectrometry (ToF-SIMS), respectively. Upon DEX treatment, NST3 and NST1 transgenic hypocotyls underwent time-dependent transdifferentiation, progressing from protoxylem-like to metaxylem-like cells. NST3-induced plants exhibited normal growth but had rough secondary wall surfaces with delaminating S2 and S3 layers. Mesoscale examination of induced SCWs in epidermal cells revealed that macrofibril thickness and orientation were comparable to xylem vessels, while wall thickness resembled that of interfascicular fibers. Additionally, induced epidermal cells formed SCWs with altered cellulose and lignin contents. These findings suggest NST3 and/or NST1 induce SCWs with shared characteristics of both xylem and fiber-like cells forming loosely arranged cell wall layers and cellulose organized at multiple angles relative to the cell growth axis and with varied cellulose and lignin abundance. This inducible system opens avenues to explore ectopic SCWs for bioenergy and bioproducts, offering valuable insights into SCW patterning across diverse cell types and developmental stages.

The structural organization of the outer tissues in the gametophytic stem of the umbrella moss Hypnodendron menziesii optimizes load bearing.

The ultrastructural design and biochemical organization of the significantly thickened outer tissues of the gametophytic stem of Hypnodendron menziesii optimizes load bearing of the stem. Hypnodendron menziesii is a bryoid umbrella moss growing in high humid conditions on the forest floors of New Zealand. The erect gametophyte bears up to eight whorls of branches in succession, spreading across the stem that bears the heavy weight of branches with highly hydrated leaves. Our investigation using a combination of light microscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and TEM-immunolabeling techniques provided novel information on the structural design and biochemical organization of greatly thickened cell walls of epidermal, hypodermal, and outermost cortical tissues, comparing underlying thin-walled cortical tissues in the gametophytic stem. Probing into the ultrastructure of the cell wall architecture of these target tissues by TEM and SEM revealed the cell walls to display a multilamellar organization, in addition to demonstrating the presence of an electron-dense substance in the cell wall, presumably flavonoids. The pattern of distribution and concentration of rhamnogalacturonan, homogalacturonan, and heteromannan, as determined by immunogold labeling, suggests that it is the combination of structural and molecular design of the cell wall that may optimize the mechanical function of the epidermal, hypodermal, and outer cortical tissues. Statistical relationships between the overall thickness of epidermal, hypodermal, and outer cortical cell walls, the lumen area of cells and the percentage area of cell wall occupied in these tissues at different heights of the stem, and thickness of secondary cell wall layers (L1-L4/5) were explored. The results of these analyses unequivocally support the contribution of outer tissues to the mechanical strength of the resilient stem.

PagKNAT2/6b regulates tension wood formation and gravitropism by targeting cytokinin metabolism.

Tension wood is a specialized xylem tissue associated with gravitropism in angiosperm trees. However, few regulators of tension wood formation have been identified. The molecular mechanisms underpinning tension wood formation remain elusive. Here, we report that a Populus KNOTTED-like homeobox gene, PagKNAT2/6b, is involved in tension wood formation and gravity response. Transgenic poplar plants overexpressing PagKNAT2/6b displayed more sensitive gravitropism than controls, as indicated by increased stem curvature. Microscopic examination revealed greater abundance of fibre cells with a gelatinous cell wall layer (G-layer) and asymmetric growth of secondary xylem in PagKNAT2/6b overexpression lines. Conversely, PagKNAT2/6b dominant repression plants exhibited decreased tension wood formation and reduced response to gravity stimulation. Moreover, sensitivity to gravity stimulation showed a negative relationship with development stage. Expression of genes related to growth and senescence was affected in PagKNAT2/6b transgenic plants. More importantly, transcription activation and electrophoretic mobility shift assays suggested that PagKNAT2/6b promotes the expression of cytokinin metabolism genes. Consistently, cytokinin content was increased in PagKNAT2/6b overexpression plants. Therefore, PagKNAT2/6b is involved in gravitropism and tension wood formation, likely via modulation of cytokinin metabolism.

Residual Membrane Fluidity in Mycobacterial Cell Envelope Layers under Extreme Conditions Underlines Membrane-Centric Adaptation.

One of the routes for adaptation to extreme environments is via remodeling of cell membrane structure, composition, and biophysical properties rendering a functional membrane. Collective studies suggest some form of membrane feedback in mycobacterial species that harbor complex lipids within the outer and inner cell wall layers. Here, we study the homeostatic membrane landscape of mycobacteria in response to high hydrostatic pressure and temperature triggers using high pressure fluorescence, mass and infrared spectroscopies, NMR, SAXS, and molecular dynamics simulations. Our findings reveal that mycobacterial membrane possesses unique and lipid-specific pressure-induced signatures that attenuate progression to highly ordered phases. Both inner and outer membrane layers exhibit phase coexistence of nearly identical lipid phases keeping residual fluidity over a wide range of temperature and pressure, but with different sensitivities. Lipidomic analysis of bacteria grown under pressure revealed lipidome remodeling in terms of chain length, unsaturation, and specific long-chained characteristic mycobacterial lipids, rendering a fluid bacterial membrane. These findings could help understand how bacteria may adapt to a broad spectrum of harsh environments by modulating their lipidome to select lipids that enable the maintenance of a fluid functional cell envelope.

Stereoselective Synthesis of meso- and l,l-Diaminopimelic Acids from Enone-Derived α-Amino Acids.

The stereoselective synthesis of meso-diaminopimelic acid (meso-DAP), the key cross-linking amino acid of the peptidoglycan cell wall layer in Gram-negative bacteria, and its biological precursor, l,l-DAP, is described. The key step involved stereoselective reduction of a common enone-derived amino acid by substrate- or reagent-based control. Overman rearrangement of the resulting allylic alcohols, concurrent alkene hydrogenation and trichloroacetamide reduction, and subsequent ruthenium-catalyzed arene oxidation completed the synthesis of each stereoisomer. The synthetic utility of this approach was demonstrated with the efficient preparation of an l,l-DAP-derived dipeptide.

A multiscale mechanics model for elastic properties of densified wood

We introduce a multiscale mechanics model for analyzing the elastic properties of super-strong densified wood (DW). Our model incorporates microstructural features such as microfibril angle and densification ratio, along with chemical parameters including degree of polymerization, crystallinity, and density of hydrogen bonds. At the nanoscale and microscale, the elastic properties of cellulose nanofibril and cell wall layers are derived analytically using the mechanics of composite materials. Finite element simulations based on representative volume elements are conducted at the mesoscale to obtain homogenized effective elastic properties at the macroscale. Our quantitative investigations validate that microstructural changes and alterations in chemical components significantly enhance DW's mechanical performance. Densification and chemical changes, especially increased cellulose content and reduced lignin, emerge as vital mechanisms for strengthening DW. The model's insights offer valuable guidance for optimizing the two-step preparation process of DW to achieve superior mechanical performance. Additionally, the versatility of the model allows for exploring the influence of cell dimensions and potential applications in designing bioinspired materials.

Impact of secreted glucanases upon the cell surface and fitness of Candida albicans during colonisation and infection

Host recognition of the pathogen-associated molecular pattern (PAMP), β-1,3-glucan, plays a major role in antifungal immunity. β-1,3-glucan is an essential component of the inner cell wall of the opportunistic pathogen Candida albicans. Most β-1,3-glucan is shielded by the outer cell wall layer of mannan fibrils, but some can become exposed at the cell surface. In response to host signals such as lactate, C. albicans shaves the exposed β-1,3-glucan from its cell surface, thereby reducing the ability of innate immune cells to recognise and kill the fungus. We have used sets of barcoded xog1 and eng1 mutants to compare the impacts of the secreted β-glucanases Xog1 and Eng1 upon C. albicans in vitro and in vivo. Flow cytometry of Fc-dectin-1-stained strains revealed that Eng1 plays the greater role in lactate-induced β-1,3-glucan masking. Transmission electron microscopy and stress assays showed that neither Eng1 nor Xog1 are essential for cell wall maintenance, but the inactivation of either enzyme compromised fungal adhesion to gut and vaginal epithelial cells. Competitive barcode sequencing suggested that neither Eng1 nor Xog1 strongly influence C. albicans fitness during systemic infection or vaginal colonisation in mice. However, the deletion of XOG1 enhanced C. albicans fitness during gut colonisation. We conclude that both Eng1 and Xog1 exert subtle effects on the C. albicans cell surface that influence fungal adhesion to host cells and that affect fungal colonisation in certain host niches.

Cell Wall Microdomains in the External Glands of Utricularia dichotoma Traps.

The genus Utricularia (bladderworts) species are carnivorous plants that prey on invertebrates using traps with a high-speed suction mechanism. The outer trap surface is lined by dome-shaped glands responsible for secreting water in active traps. In terminal cells of these glands, the outer wall is differentiated into several layers, and even cell wall ingrowths are covered by new cell wall layers. Due to changes in the cell wall, these glands are excellent models for studying the specialization of cell walls (microdomains). The main aim of this study was to check if different cell wall layers have a different composition. Antibodies against arabinogalactan proteins (AGPs) were used, including JIM8, JIM13, JIM14, MAC207, and JIM4. The localization of the examined compounds was determined using immunohistochemistry techniques and immunogold labeling. Differences in composition were found between the primary cell wall and the cell secondary wall in terminal gland cells. The outermost layer of the cell wall of the terminal cell, which was cuticularized, was devoid of AGPs (JIM8, JIM14). In contrast, the secondary cell wall in terminal cells was rich in AGPs. AGPs localized with the JIM13, JIM8, and JIM14 epitopes occurred in wall ingrowths of pedestal cells. Our research supports the hypothesis of water secretion by the external glands.

Revealing degradation mechanisms of archaeological flax textiles through the evolution of fibres’ parietal polymers by synchrotron deep-UV fluorescence

Autofluorescence generated by plant cells and tissues provides a label-free method for investigating them without altering their structure and biochemistry. While in the literature, research mainly focuses on investigating fresh plant tissues, this study examines flax yarns from five archaeological artefacts to understand how cell wall fibres degrade and how their biochemical composition is modified after natural ageing over millennia. Using Synchrotron-based deep UV fluorescence (S-DUV), we aim to correlate fibre autofluorescence with the environmental conditions of discovery (clothes of votive statuettes buried in a sanctuary or shrouds and bandages for mummification rituals found in tombs) or their intended purposes (fishing net, which underwent wet-dry cycles during its use). Out of the five archaeological objects studied, the two yarns sampled from the buried fabrics were found encrusted with minerals, but with significant differences in the fibres’ degradation. The yarn sampled from the fishing net displayed a great variability of the dataset, with some fibres biochemically similar to the buried samples while others were closer to the funerary linen shrouds. Lignin's predominant presence at 480 nm in the fishing net suggests extensive cellulose-enriched cell wall layer degradation while the lignin-enriched layer is still preserved. Additionally, second harmonic generation imaging microscopy (SHG) and 2-photon excitation fluorescence (2PEF) were used alongside S-DUV analyses to evaluate the flax fibres’ ultrastructure. SHG confirmed S-DUV findings and indicated poor crystalline cellulose preservation in one linen shroud, explaining the yarn's brittleness.

Sound absorption performance and mechanism of aluminum foam with double-layer structures of conventional and porous cell walls

Open-cell aluminum foam exhibits sound absorption valleys in the 2500-4000 Hz range, reducing its sound absorption performance in the 800–6300 Hz range. This paper prepared a novel aluminum foam with a double-layer structure using the infiltration casting method, and its pore structure, sound absorption performance, acoustic model, and sound absorption mechanism are investigated. The double-layer structure consists of a conventional pore (CP) layer with a single pore size of 250 μm or 600 μm and a porous cell wall (PCW) layer with double pore diameters of 250 μm and 600 μm. As the thickness ratio between the CP and PCW layers decreases, the acoustic absorption valley value of the double-layer structure increases when combined with a small-pore CP layer. In contrast, it decreases slightly when combined with a large-pores CP layer. The double-layer structure reaches a sound absorption valley value and average sound absorption coefficient of 0.912 and 0.902, respectively. The double-layer structure's sound absorption valley value is better than that of a homogeneous structure, improving sound absorption performance. A Lu modified model is established to characterize the sound absorption of the double-layer structure, which closely matches the experimental results. The modified model further analyzed the vital geometrical parameters affecting the absorption valleys. Acoustic impedance analysis shows the enhanced sound absorption valleys are due to: 1) Gradient acoustic impedance reduces sound reflections at the air-structure interfaces and increases secondary reflection at the interfaces in the structure; 2) The series–parallel configuration increased the resonance peak bandwidth, while the dual-sized resonance cavities regulated the resonance peak frequency.

Unveiling the structural properties and induced resistance activity in rice of Chitin/Chitosan-Glucan Complex of Rhizoctonia solani AG1 IA inner cell wall

Phytopathogen cell wall polysaccharides have important physiological functions. In this study, we isolated and characterized the alkali-insoluble residue on the inner layers of the Rhizoctonia solani AG1 IA cell wall (RsCW-AIR). Through chemical composition and structural analysis, RsCW-AIR was mainly identified as a complex of chitin/chitosan and glucan (ChCsGC), with glucose and glucosamine were present in a molar ratio of 2.7:1.0. The predominant glycosidic bond linkage of glucan in ChCsGC was β-1,3-linked Glcp, both the α and β-polymorphic forms of chitin were presented in it by IR, XRD, and solid-state NMR, and the ChCsGC exhibited a degree of deacetylation measuring 67.08 %. RsCW-AIR pretreatment effectively reduced the incidence of rice sheath blight, and its induced resistance activity in rice was evaluated, such as inducing a reactive oxygen species (ROS) burst, leading to the accumulation of salicylic acid (SA) and the up-regulation of SA-related gene expression. The recognition of RsCW-AIR in rice is partially dependent on CERK1.

Characterization of the fiber-like cortical cells in moss gametophytes.

Fiber-like cells with thickened cell walls of specific structure and polymer composition that includes (1 → 4)-β-galactans develop in the outer stem cortex of several moss species gametophytes. The early land plants evolved several specialized cell types and tissues that did not exist in their aquatic ancestors. Of these, water-conducting elements and reproductive organs have received most of the research attention. The evolution of tissues specialized to fulfill a mechanical function is by far less studied despite their wide distribution in land plants. For vascular plants following a homoiohydric trajectory, the evolutionary emergence of mechanical tissues is mainly discussed starting with the fern-like plants with their hypodermal sterome or sclerified fibers that have xylan and lignin-based cell walls. However, mechanical challenges were also faced by bryophytes, which lack lignified cell-walls. To characterize mechanical tissues in the bryophyte lineage, following a poikilohydric trajectory, we used six wild moss species (Polytrichum juniperinum, Dicranum sp., Rhodobryum roseum, Eurhynchiadelphus sp., Climacium dendroides, and Hylocomium splendens) and analyzed the structure and composition of their cell walls. In all of them, the outer stem cortex of the leafy gametophytic generation had fiber-like cells with a thickened but non-lignified cell wall. Such cells have a spindle-like shape with pointed tips. The additional thick cell wall layer in those fiber-like cells is composed of sublayers with structural evidence for different cellulose microfibril orientation, and with specific polymer composition that includes (1 → 4)-β-galactans. Thus, the basic cellular characters of the cells that provide mechanical support in vascular plant taxa (elongated cell shape, location at the periphery of a primary organ, the thickened cell wall and its peculiar composition and structure) also exist in mosses.

The multifunctional roles of the extracellular matrix in the sessile life of the zygnematophyte Penium margaritaceum: stick, glide and cluster.

Adhesion and consequent adoption of a sessile habit is a common feature of many green algae and was likely a key mechanism in terrestrialization by an ancient zygnematophyte (i.e., the Zygnematophyceae, the group of algae ancestral to land plants). Penium margaritaceum is a unicellular zygnematophyte that exhibits a multistep adhesion mechanism, which leads to the establishment of the sessile habit. Based on microscopic and immunological data, a dense aggregate of fibrils containing arabinogalactan-protein (AGP)-like components covers the cell surface and is responsible for initial adhesion. The AGP-like fibrils are 20 μm in diameter and possess chemical profiles similar to land plant AGPs. The fibrils attach to the inner cell wall layers and are very likely connected to the plasma membrane as glycophosphatidylinositol (GPI) lipid-anchored proteins, as they are susceptible to phospholipase C treatment. The presence of GPI-anchored AGPs in Penium is further supported by the identification of putative Penium homologs of land plant AGP genes responsible for GPI-anchor synthesis. After adhesion, cells secrete a complex heteropolysaccharide-containing extracellular polymeric substance (EPS) that facilitates gliding motility and the formation of cell aggregates. Fucoidan-like polymers, major components of brown algal CWs, are a major constituent of both the EPS and the adhesive layer of the CW and their role in the adhesion process is still to be examined.

Optimization of microwave-expanding pretreatment and microwave-assisted extraction of hemicellulose from bagasse cells with the exploration of the extracting mechanism

Hemicellulose is mainly distributed in the tightly packed S2 layer of the plant cell wall and the middle lamella. This rigid microstructure of wood and interactions among hemicellulose, lignin, and cellulose jointly restrict the separation and transformation of hemicellulose in the wood matrix. To address this issue, a method combined with microwave-expanding pretreatment (MEP) and microwave-assisted extraction (MAE) with a NaOH solution was carried out. We found that the MEP could effectively create new pathways for bagasse cells in mass transferring. More specifically, 195 % of the specific surface area (m2/g) with 193 % of the pores (>50 nm) increased after MEP; the SEM images also confirmed that the microstructure of bagasse was modified. MAE could considerably exfoliate hemicellulose from cellulose fiber and accelerate mass transfer. Additionally, we optimized MEP and MAE by using response surface methodology (RSM). The optimal parameters were 370 K, 3.7 min, 1081 W microwave power, and 9.9 wt% NH4HCO3 consumption for the MEP and 1100 W microwave power, 2.5 wt% NaOH concentration, 34.6 min reaction time for MAE, respectively. Moreover, molecular dynamics (MD) simulation suggests that NaOH could significantly lower the work needed to peel off the xylan chain from cellulose nanofibril.

Unveiling the mechanism of bactericidal activity of a cecropin A-fused endolysin LNT113

Endolysins are lytic enzymes produced by bacteriophages at the end of their lytic cycle and degrade the peptidoglycan layer of the bacterial cell wall. Thus, they have been extensively explored as a promising antibacterial agent to replace or supplement current antibiotics. Gram-negative bacteria, however, are prone to resist exogenous endolysins owing to their protective outer membrane. We previously engineered endolysin EC340, encoded by the Escherichia coli phage PBEC131, by substituting its seven amino acids and fusing an antimicrobial peptide cecropin A at its N-terminus. The engineered endolysin LNT113 exerted superior activity to its intrinsic form. This study investigated how cecropin A fusion facilitated the bactericidal activity of LNT113 toward Gram-negative bacteria. Cecropin A of LNT113 markedly increased the interaction with lipopolysaccharides, while the E. coli defective in the core oligosaccharide was less susceptible to endolysins, implicating the interaction between the core oligosaccharide and endolysins. In fact, E. coli with compromised lipid A construction was more vulnerable to LNT113 treatment, suggesting that the integrity of the lipid A layer was important to resist the internalization of LNT113 across the outer membrane. Cecropin A fusion further accelerated the inner membrane destabilization, thereby enabling LNT113 to deconstruct it promptly. Owing to the increased membrane permeability, LNT113 could inactivate some Gram-positive bacteria as well. This study demonstrates that cecropin A fusion is a feasible method to improve the membrane permeability of endolysins in both Gram-negative and Gram-positive bacteria.

Keanekaragaman Fungi Mikoriza Arbuskula pada Tegakan Kelicung (Diospyros macrophylla Blume) di KHDTK Rarung, Lombok Tengah

Kelicung tree (Diospyros macrophylla) is a native tree species of West Nusa Tenggara. It is a slow-growing tree with very good wood ornament, strength, and durability properties. Symbiotic mutualism between kelicung and mycorrhiza has not been documented. Mycrorrhiza is a mutualism symbiosis between fungi and plant roots that could improve plant growth due to increase nutrient and water absorbtion. Therefore, the objective of this study is to investigate mycorrhizal symbiosis in kelicung roots. Soil and root samples were taken in the Rarung Special Purpose Forest Area at 0 – 20 cm depth. Isolation and identification of arbuscular mycorrhizal fungi used screening and centrifugation methods to identify spore density, diversity, abundance, and frequency. Furthermore, root staining and colonization of arbuscular mycorrhizal fungi were carried out by observing the structure of vesicles, arbuscules, hyphae, and spores on Kelicung roots. The research results showed that the average number of spores found was 846 spores/50 g of soil. Spores were identified in two genera: Glomus sp and Acaulospora sp. Glomus spores found were round, the colour of the spores was yellow, the spores did not react when Melzer's solution was dropped, and the spore walls of the Arbuscular mycorrhizal fungi of the genus Glomus consisted of 1-2 layers of cell walls. Observation of root colonization, no structures of root arbuscular mycorrhizal fungi were found in Kelicung.
 Keywords: Acaulospora sp., Arbuscular mycorrhizal fungi, Diospyros macrophylla, Glomus sp., Kelicung

Comparison on thermally modified beech wood in different mediums: Morphology, chemical change and water-related properties

Thermal modification has been proved to be an effective approach to improve the dimensional stability of wood, while different processes of thermal modification often resulted in various efficacy. In this study, the morphology, chemical structure, crystallinity, pore size distribution, and some water-related properties were investigated in order to explore the effect of different mediums (vacuum, nitrogen, steam and air) on thermally modified wood (TMW). It was found that heating medium plays an important role in thermal modification of wood. At both 180 and 210 ℃, the general severity of thermal modification is in the following order: air > steam > nitrogen > vacuum. Accordingly, the highest dimensional stability appeared in air TMW, and then steam, nitrogen, and vacuum. It seemed that the water-related properties were primarily affected by the extent of decomposition of the amorphous polysaccharides, but showed no direct relationship with the pore structure. Lignin changed greatly for TMW treated in steam at 180 ℃ and all TMW treated at 210 ℃, by showing more uniform distribution in all cell wall layers. It might be resulted from the migration of lignin fragments after depolymerization, the formation of pseudo lignin from holocellulose, and the increased relative lignin content in secondary wall. The changes on pore structure and lignin structure might have significant effect on other wood properties.