Cell Wall Analogues Research Articles

Bacterial Cell Wall Analogue Peptides Control the Oligomeric States and Activity of the Glycopeptide Antibiotic Eremomycin: Solution NMR and Antimicrobial Studies.

For some time, glycopeptide antibiotics have been considered the last line of defense against Methicillin-resistant Staphylococcus aureus (MRSA). However, vancomycin resistance of Gram-positive bacteria is an increasingly emerging worldwide health problem. The mode of action of glycopeptide antibiotics is essentially the binding of peptidoglycan cell-wall fragments terminating in the d-Ala-d-Ala sequence to the carboxylate anion binding pocket of the antibiotic. Dimerization of these antibiotics in aqueous solution was shown to persist and even to enhance the antibacterial effect in a co-operative manner. Some works based on solid state (ss) Nuclear Magnetic Resonance (NMR) studies questioned the presence of dimers under the conditions of ssNMR while in a few cases, higher-order oligomers associated with contiguous back-to-back and face-to-face dimers were observed in the crystal phase. However, it is not proved if such oligomers persist in aqueous solutions. With the aid of 15N-labelled eremomycin using 15N relaxation and diffusion NMR methods, we observed tetramers and octamers when the N-Ac-d-Ala-d-Ala dipeptide was added. To the contrary, the N-Ac-d-Ala or (N-Ac)2-l-Lys-d-Ala-d-Ala tripeptide did not induce higher-order oligomers. These observations are interesting examples of tailored supramolecular self-organization. New antimicrobial tests have also been carried out with these self-assemblies against MRSA and VRE (resistant) strains.

Induction of Endogenous Antibody Recruitment to the Surface of the Pathogen Enterococcus faecium.

For the foreseeable future, conventional small molecule antibiotics will continue to be the predominant treatment option due to wide patient coverage and low costs. Today, however, there is already a significant portion of patients that fail to respond to small molecule antibiotics and, according to the Centers for Disease Control and Prevention, this number is poised to increase in the coming years. Therefore, this rise in drug resistant bacteria must be countered with the development of nontraditional therapies. We propose a measure based on the re-engagement of the immune system toward pathogenic bacteria by grafting bacterial cell surfaces with immunogenic agents. Herein, we describe a class of cell wall analogues that selectively graft bacterial cell surfaces with epitopes that promote their opsonization. More specifically, synthetic analogues of peptidoglycan conjugated to haptens were designed to be incorporated by the cell wall biosynthetic machinery into live Enterococcus faecium. E. faecium is a formidable human pathogen that poses a considerable burden to healthcare and often results in fatalities. We showed that treatment of E. faecium and vancomycin-resistant strains with the cell wall analogues led to the display of haptens on the cell surface, which induced the recruitment of antibodies existing in the serum of humans. These results demonstrate the feasibility in using cell wall analogues as the basis of a class of bacterial immunotherapies against dangerous pathogens.

Vancomycin-Dependent Response in Live Drug-Resistant Bacteria by Metabolic Labeling.

The surge in drug-resistant bacterial infections threatens to overburden healthcare systems worldwide. Bacterial cell walls are essential to bacteria, thus making them unique targets for the development of antibiotics. We describe a cellular reporter to directly monitor the phenotypic switch in drug-resistant bacteria with temporal resolution. Vancomycin-resistant enterococci (VRE) escape the bactericidal action of vancomycin by chemically modifying their cell-wall precursors. A synthetic cell-wall analogue was developed to hijack the biosynthetic rewiring of drug-resistant cells in response to antibiotics. Our study provides the first in vivo VanX reporter agent that responds to cell-wall alteration in drug-resistant bacteria. Cellular reporters that reveal mechanisms related to antibiotic resistance can potentially have a significant impact on the fundamental understanding of cellular adaption to antibiotics.

Cell Wall Remodeling by a Synthetic Analog Reveals Metabolic Adaptation in Vancomycin Resistant Enterococci.

Drug-resistant bacterial infections threaten to overburden our healthcare system and disrupt modern medicine. A large class of potent antibiotics, including vancomycin, operate by interfering with bacterial cell wall biosynthesis. Vancomycin-resistant enterococci (VRE) evade the blockage of cell wall biosynthesis by altering cell wall precursors, rendering them drug insensitive. Herein, we reveal the phenotypic plasticity and cell wall remodeling of VRE in response to vancomycin in live bacterial cells via a metabolic probe. A synthetic cell wall analog was designed and constructed to monitor cell wall structural alterations. Our results demonstrate that the biosynthetic pathway for vancomycin-resistant precursors can be hijacked by synthetic analogs to track the kinetics of phenotype induction. In addition, we leveraged this probe to interrogate the response of VRE cells to vancomycin analogs and a series of cell wall-targeted antibiotics. Finally, we describe a proof-of-principle strategy to visually inspect drug resistance induction. Based on our findings, we anticipate that our metabolic probe will play an important role in further elucidating the interplay among the enzymes involved in the VRE biosynthetic rewiring.

Characterisation of bacterial cellulose from diverse Komagataeibacter strains and their application to construct plant cell wall analogues

This study investigated cellulose production and microstructure variation from six Komagataeibacter strains (ATCC 53524, ATCC 10245, ATCC 23769, ATCC 700178, NBRC 13693 and KTH 5655). Strain KTH 5655 produced the highest cellulose yields (10.39 g/l) after 9 days cultivation. Nuclear magnetic resonance spectroscopy and X-ray diffraction revealed that strain ATCC 23769 synthesised cellulose with the lowest crystallinity and decreased ratio of Iα/Iβ allomorph, whilst strain KTH 5655 produced a relatively ordered cellulose structure. However, the average widths of cellulose ribbons were similar (30–50 nm) for all types of cellulose. Phylogenetic analysis of the 16S rRNA gene indicated that these strains shared a high level of genetic similarity (ranging from 88 to 98%). All strains were used to produce cellulose in the presence of arabinoxylan or xyloglucan as simplified cell wall analogues. Our results provide guidance for the selection of cellulose-producing strains for specific biotechnological and research applications.

Aluminium effects on mechanical properties of cell wall analogues

Aluminium (Al) toxicity adversely impacts plant productivity in acid soils by restricting root growth and although several mechanisms are involved the physiological basis of decreased root elongation remains unclear. Understanding the primary mechanisms of Al rhizotoxicity is hindered due to the rapid effects of soluble Al on root growth and the close proximity of many cellular components within the cell wall, plasma membrane, cytosol and nucleus with which Al may react. To overcome some of these difficulties, we report on a novel method for investigating Al interactions with Komagataeibacter xylinus bacterial cellulose (BC)-pectin composites as cell wall analogues. The growth of K. xylinus in the presence of various plant cell wall polysaccharides, such as pectin, has provided a unique in vitro model system with which to investigate the interactions of Al with plant cell wall polysaccharides. The BC-pectin composites reacted in a similar way with Al as do plant cell walls, providing insights into the effects of Al on the mechanical properties of the BC-pectin composites as cell wall analogues. Our findings indicated that there were no significant effects of Al (4-160 μM) on the tensile stress, tensile strain or Young's modulus of the composites. This finding was consistent with cellulose, not pectin, being the major load bearing component in BC-pectin composites, as is also the case in plant cell walls.

Dipeptide-Based Metabolic Labeling of Bacterial Cells for Endogenous Antibody Recruitment.

The number of antibiotic-resistant bacterial infections has increased dramatically over the past decade. To combat these pathogens, novel antimicrobial strategies must be explored and developed. We previously reported a strategy based on hapten-modified cell wall analogues to induce recruitment of endogenous antibodies to bacterial cell surfaces. Cell surface remodeling using unnatural single d-amino acid cell wall analogues led to modification at the C-terminus of the peptidoglycan stem peptide. During peptidoglycan processing, installed hapten-displaying amino acids can be subsequently removed by cell wall enzymes. Herein, we disclose a two-step dipeptide peptidoglycan remodeling strategy aimed at introducing haptens at an alternative site within the stem peptide to improve retention and diminish removal by cell wall enzymes. Through this redesigned strategy, we determined size constraints of peptidoglycan remodeling and applied these constraints to attain hapten–linker conjugates that produced high levels of antibody recruitment to bacterial cell surfaces.

Poroelastic mechanical effects of hemicelluloses on cellulosic hydrogels under compression.

Hemicelluloses exhibit a range of interactions with cellulose, the mechanical consequences of which in plant cell walls are incompletely understood. We report the mechanical properties of cell wall analogues based on cellulose hydrogels to elucidate the contribution of xyloglucan or arabinoxylan as examples of two hemicelluloses displaying different interactions with cellulose. We subjected the hydrogels to mechanical pressures to emulate the compressive stresses experienced by cell walls in planta. Our results revealed that the presence of either hemicellulose increased the resistance to compression at fast strain rates. However, at slow strain rates, only xyloglucan increased composite strength. This behaviour could be explained considering the microstructure and the flow of water through the composites confirming their poroelastic nature. In contrast, small deformation oscillatory rheology showed that only xyloglucan decreased the elastic moduli. These results provide evidence for contrasting roles of different hemicelluloses in plant cell wall mechanics and man-made cellulose-based composite materials.

Core–shell cellulose nanofibers for biocomposites – Nanostructural effects in hydrated state

Core–shell wood cellulose nanofibers (CNF) coated by an XG hemicellulose polymer are prepared and used to make biocomposites. CNF/XG biocomposites have interest as packaging materials and as hydrated CNF/XG plant cell wall analogues. Structure and properties are compared between Core–shell CNF/XG and more inhomogeneous CNF/XG. Experiments include XG sorption, dynamic light scattering of CNF nanoparticle suspensions, FE-SEM of nanostructure, moisture sorption, tensile testing in moist conditions and dynamic mechanical analysis. 2H NMR relaxometry is performed on materials containing sorbed 2H2O2 in order to assess water molecular dynamics in different materials. The results clarify the roles of CNF, XG and the CNF/XG interface in the biocomposites, both in terms of moisture sorption mechanisms and mechanical properties in moist state. The concept of core–shell nanofiber network biocomposites, prepared by filtering of colloids, provides improved control of polymer matrix distribution and interface structure. Also, present mechanical properties are much superior to comparable plant fiber biocomposites.

Structure and cell wall cleavage by modular lytic transglycosylase MltC of Escherichia coli.

The lytic transglycosylases are essential bacterial enzymes that catalyze the nonhydrolytic cleavage of the glycan strands of the bacterial cell wall. We describe here the structural and catalytic properties of MltC, one of the seven lytic transglycosylases found in the genome of the Gram-negative bacterium Escherichia coli. The 2.3 Å resolution X-ray structure of a soluble construct of MltC shows a unique, compared to known lytic transglycosylase structures, two-domain structure characterized by an expansive active site of 53 Å length extending through an interface between the domains. The structures of three complexes of MltC with cell wall analogues suggest the positioning of the peptidoglycan in the active site both as a substrate and as a product. One complex is suggested to correspond to an intermediate in the course of sequential and exolytic cleavage of the peptidoglycan. Moreover, MltC partitioned its reactive oxocarbenium-like intermediate between trapping by the C6-hydroxyl of the muramyl moiety (lytic transglycosylase activity, the major path) and by water (muramidase activity). Genomic analysis identifies the presence of an MltC homologue in no less than 791 bacterial genomes. While the role of MltC in cell wall assembly and maturation remains uncertain, we propose a functional role for this enzyme as befits the uniqueness of its two-domain structure.

Binding of polyphenols to plant cell wall analogues – Part 2: Phenolic acids

Bacterial cellulose and cellulose–pectin composites were used as well-defined model plant cell wall (PCW) systems to study the interaction between phenolic acids (PA) derived from purple carrot juice concentrate (PCJC) and PCW components. Significant PA depletion from solution occurred, with pure cellulose initially (30s–1h) absorbing more than cellulose–pectin composites in the first hour (ca 20% cf 10–15%), but with all composites absorbing similar levels (ca 30%) after several days. Individual PAs bound to different relative extents with caffeic acid>chlorogenic acid>ferulic acid. Extrapolation of data for these model systems to carrot puree suggests that nutritionally-significant amounts of PAs could bind to cell walls, potentially restricting bioavailability in the small intestine and, as a consequence, delivering PAs to the large intestine for fermentation and metabolism by gut bacteria.

Binding of polyphenols to plant cell wall analogues – Part 1: Anthocyanins

Anthocyanins are located within the vacuole of plant cells, and are released following cell rupture during eating or processing at which time they first come into contact with the plant cell wall. The extent of anthocyanin-cell wall interaction was investigated by monitoring the rate of anthocyanin depletion in the presence of pure cellulose or cellulose-pectin composites as cell wall models. It was found that anthocyanins interact with both cellulose and pectin over a two-stage process with initially (mins-hours) 13 similar to 18% of anthocyanins binding to cellulose or cellulose/pectincomposites. With prolonged exposure (days-weeks), a gradual increase in anthocyanin binding occurs, possibly due to anthocyanins stacking on top of a base layer. Binding of acylated and non-acylated anthocyanins followed a similar pattern with slightly more (5-10%) binding of the acylated forms. Composites with the highest pectin content had the greatest anthocyanin binding suggesting the existence of both ionic interactions (with pectin) and hydrophobic interactions (with cellulose) of anthocyanin with plant cell walls.

Molecular Interactions between Glycopeptide Vancomycin and Bacterial Cell Wall Peptide Analogues

The molecular interactions of the glycopeptide antibiotic vancomycin (Van) with bacterial cell wall analogues N,N'-diacetyl-L-Lys-D-Ala-D-Ala (Ac(2) KdAdA) and N,N'-diacetyl-L-Lys-D-Ala-D-Lac (Ac(2) KdAdL) were investigated in neat water, phosphate buffer and HEPES buffer by using fluorescence correlation spectroscopy (FCS) and molecular dynamics (MD) simulations. The FCS determined dissociation constants (k(d)) show that the intrinsic binding affinity between Van and the drug-sensitive peptide ligand Ac(2)KdAdA remains invariant when the solvent is changed from neat water to either PBS or HEPES buffer; this demonstrates that there are no obvious solvent effects on the association between Van and Ac(2)KdAdA due to the strong intermolecular interaction between the two moieties. When compared to Ac(2)KdAdA, a significantly larger k(d) value was observed for the binding between the drug-resistant peptide ligand Ac(2)KdAdL and Van. Furthermore, the k(d) increased by about 8- to 11-times when the solvent was changed from neat water to 10 mM phosphate/HEPES buffer. The stability of the Ac(2)KdAdL-Van complex was dependent on the concentration of the buffer and k(d) increases as the concentration of either phosphate ions or HEPES increased until an equilibrium was attained. Both FCS and MD simulation studies clearly showed that the components constituting the buffer solution (e.g., phosphate ions and HEPES) are involved in molecular interactions with the binding pocket of Van and they profoundly affect the intrinsic stability of the complex formed between the low-affinity Ac(2)KdAdL and Van. These results could help us to better understand the detailed structure and activity of glycopeptide antibiotic derivatives toward bacterial cell wall peptide analogues, and can further facilitate the development of new drug candidates against drug-resistant bacterial strains.

Influence of the Charge State on the Structures and Interactions of Vancomycin Antibiotics with Cell‐Wall Analogue Peptides: Experimental and Theoretical Studies

Charge matters! The charge state significantly influences the conformation and the binding energy between vancomycin antibiotic and bacterial cell-wall analogue peptides (see figure). Surface-induced dissociation (SID) studies provide a quantitative comparison between the stabilities of different charge states of the complex.In this study we examined the effect of the charge state on the energetics and dynamics of dissociation of the noncovalent complex between the vancomycin and the cell-wall peptide analogue N(alpha),N(epsilon)-diacetyl-L-Lys-D-Ala-D-Ala (V-Ac(2)LKdAdA). The binding energies between the vancomycin and the peptide were obtained from the RRKM (Rice, Ramsperger, Kassel, Marcus) modeling of the time- and energy-resolved surface-induced dissociation (SID) experiments. Our results demonstrate that the stability of the complex towards fragmentation increases in the order: doubly protonated<singly protonated<deprotonated. Dissociation of the singly protonated and singly deprotonated complex is characterized by very large entropy effects, which indicate a substantial increase in the conformational flexibility of the resulting products. The experimental threshold energies of (1.75+/-0.08) eV ((40.3+/-1.8) kcal mol(-1)) and (1.34+/-0.08) eV ((30.9+/-1.8) kcal mol(-1)) obtained for the deprotonated and singly protonated complexes, respectively, are in excellent agreement with the results of density functional theory calculations. The increased stability of the deprotonated complex observed experimentally is attributed to the presence of three charged sites in the deprotonated complex, as compared with only one charged site in the singly protonated complex. The low binding energy of (0.93+/-0.04) eV ((21.4+/-0.9) kcal mol(-1)) obtained for the doubly protonated complex suggests that this ion is destabilized by Coulomb repulsion between the singly protonated vancomycin and the singly protonated peptide comprising the complex.

Experimental and Theoretical Studies of the Structures and Interactions of Vancomycin Antibiotics with Cell Wall Analogues

Surface-induced dissociation (SID) of the singly protonated complex of vancomycin antibiotic with cell wall peptide analogue (N(alpha),N(epsilon)-diacetyl-L-Lys-D-Ala-D-Ala) was studied using a 6 T Fourier Transform Ion Cyclotron Resonance Mass Spectrometer (FT-ICR MS) specially configured for SID experiments. The binding energy between the vancomycin and the peptide was obtained from the RRKM modeling of the time- and energy-resolved fragmentation efficiency curves (TFECs) of the precursor ion and its fragments. Molecular dynamics simulations of the vancomycin, peptide, and vancomycin-peptide complex were carried out to explore the low energy conformations. Density functional theory (DFT) calculations of the geometries, proton affinities, and binding energies were performed for several model systems including vancomycin (V), vancomycin aglycon (VA), N(alpha),N(epsilon)-diacetyl-L-Lys-D-Ala-D-Ala, and noncovalent complexes of VA with N-acetyl-D-Ala-D-Ala and V with N(alpha),N(epsilon)-diacetyl-L-Lys-D-Ala-D-Ala. Comparison between the experimental and computational results suggests that the most probable structure of the complex observed in our experiments corresponds to the neutral peptide bound to the vancomycin protonated at the primary amine of the disaccharide group. The experimental binding energy of 30.9 +/- 1.8 kcal/mol is in good agreement with the binding energy of 36.3-42.0 kcal/mol calculated for the model system representing the preferred structure of the complex.

Molecular Recognition and Screening Using a 15N Group Selective STD NMR Method

We present a novel saturation transfer difference (STD) experiment where group selective (GS) saturation of amide protons in (15)N labeled hosts is achieved. It is demonstrated that a train of BIRD(d) pulses that inverts only protons attached to (15)N indeed results in saturation of the amide protons, while the background proton magnetization is much less affected. The undesired effect of partial saturation of the unlabeled protons can be completely cancelled out in difference spectra by switching the (15)N carrier between the on- and the off-resonance frequencies. As a result, clean and artifact-free STD spectra are obtained without the need of time-consuming optimization of experimental parameters and acquiring control spectra in the absence of the host. The use of the (15)N-GS STD experiment is demonstrated for the case of a glycopeptide antibiotic (dimeric eremomycin)-cell-wall analogue peptide (N-Ac-D-Ala) model system where the host and guest (1)H signals overlap. The application seems feasible for ligand screening against proteins without the prerequisite of a clean on-resonance frequency or defined ligand library. The new experiment can be used as the basis for studying intermolecular interactions where the standard STD experiment is difficult to optimize.

Quantum Simulations of the Structure and Binding of Glycopeptide Antibiotic Aglycons to Cell Wall Analogues

The recent rise of vancomycin-resistant enterococci (VRE) and vancomycin-resistant Staphylococcus aureus (VRSA) has given new impetus to the study of the binding between glycopeptide antibiotics and bacterial cell wall termini. Here, we report on an extensive first principles investigation of the binding of vancomycin, avoparcin, teicoplanin, and ristocetin aglycons with dipetides, Ac-d-Ala-X, where X = d-Lac and d-Ser (characteristic of VREs) and X = d-Ala, Gly (characteristic of non-VREs), and a model "methylated d-Ala" CH(2)CH(CH(3))COO(-), in liquid as well as gas phase. The gas-phase ordering of the binding, from strongest to weakest, is Gly, d-Ala, d-Ser, CH(2)CH(CH(3))COO(-), and d-Lac. Calculations show that the order of the Gly and d-Ala binding is reversed in solution. The results are in good agreement with recent experimental findings.

Mechanical effects of plant cell wall enzymes on cellulose/xyloglucan composites

Xyloglucan-acting enzymes are believed to have effects on type I primary plant cell wall mechanical properties. In order to get a better understanding of these effects, a range of enzymes with different in vitro modes of action were tested against cell wall analogues (bio-composite materials based on Acetobacter xylinus cellulose and xyloglucan). Tomato pericarp xyloglucan endo transglycosylase (tXET) and nasturtium seed xyloglucanase (nXGase) were produced heterologously in Pichia pastoris. Their action against the cell wall analogues was compared with that of a commercial preparation of Trichoderma endo-glucanase (EndoGase). Both 'hydrolytic' enzymes (nXGase and EndoGase) were able to depolymerise not only the cross-link xyloglucan fraction but also the surface-bound fraction. Consequent major changes in cellulose fibril architecture were observed. In mechanical terms, removal of xyloglucan cross-links from composites resulted in increased stiffness (at high strain) and decreased visco-elasticity with similar extensibility. On the other hand, true transglycosylase activity (tXET) did not affect the cellulose/xyloglucan ratio. No change in composite stiffness or extensibility resulted, but a significant increase in creep behaviour was observed in the presence of active tXET. These results provide direct in vitro evidence for the involvement of cell wall xyloglucan-specific enzymes in mechanical changes underlying plant cell wall re-modelling and growth processes. Mechanical consequences of tXET action are shown to be complimentary to those of cucumber expansin.

Noncovalent interactions: defining cooperativity. Ligand binding aided by reduced dynamic behavior of receptors. Binding of bacterial cell wall analogues to ristocetin A.

Changes in the relative populations of the monomer and asymmetric dimer forms of ristocetin A, upon binding of two molecules of ligand, suggest that ligand binding is negatively cooperative with respect to dimerization. However, strong hydrogen bonds formed in the binding sites of the ligands are reinforced in the dimer relative to the monomer, and the barrier to dissociation of the dimer is increased upon binding of the ligands. It is concluded that the interactions which are common in the binding of both ligands are made with positive cooperativity with respect to those involved in dimerization. The conclusions are relevant to the binding of ligands to proteins, where ligand binding energy can be derived from stabilization of the protein in its ligand-bound form.

Mechanical properties of primary plant cell wall analogues.

Mechanical effects of turgor pressure on cell walls were simulated by deforming cell wall analogues based on Acetobacter xylinus cellulose under equi-biaxial tension. This experimental set-up, with associated modelling, allowed quantitative information to be obtained on cellulose alone and in composites with pectin and/or xyloglucan. Cellulose was the main load-bearing component, pectin and xyloglucan leading to a decrease in modulus when incorporated. The cellulose-only system could be regarded as an essentially linear elastic material with a modulus ranging from 200 to 500 MPa. Pectin incorporation modified extensibility properties of the system by topology/architecture changes of cellulose fibril assemblies, but the cellulose/pectin composites could still be described as a linear elastic material with a modulus ranging from 120 to 250 MPa. The xyloglucan/cellulose composite could not be modelled as a linear elastic material. Introducing xyloglucan into a cellulose network or a cellulose/pectin composite led to very compliant materials characterised by time-dependent creep behaviour. Modulus values obtained for the composite materials were compared with mechanical data found for plant-derived systems. After comparing bi-axial and uni-axial behaviour of the different composites, structural models were proposed to explain the role of each polysaccharide in determining the mechanical properties of these plant primary cell wall analogues.