Cell Surface Displayed Research Articles

Engineering Pickering Emulsion with Cell Surface-Displayed Esterase Est7 for Specific and Efficient Synthesis of EPA Monoglyceride

Engineering Pickering Emulsion with Cell Surface-Displayed Esterase Est7 for Specific and Efficient Synthesis of EPA Monoglyceride

Preparation of Bacterial Cell-Surface Displayed Semisynthetic Cyclic Peptides.

Semisynthetic cyclic peptides bearing both non-proteinogenic and genetically encoded amino acids are excellent ligands for peptide-based drug discovery. While semisynthesis expands the chemical space, genetic encoding allows access to a large library via randomization at the nucleic acid level. Selection of novel binders of such macrocyclic ligands requires linking their genotype to phenotype. In this chapter, we report a bacterial cell-surface display system to present cyclic peptides composed of synthetic and genetically encoded fragments. The synthetic fragment along with the split intein partner and an aminooxy moiety is ligated and cyclized with the recombinant backbone containing an unnatural amino acid by protein trans-splicing and intramolecular oxime ligation, respectively. A pH-shift protocol was applied to accelerate on surface cyclization. This method will enable generation of semisynthetic cyclic peptide libraries and their selection by fluorescence-activated cell sorting.

Cell-Surface Displayed Expression of Trehalose Synthase from Pseudomonas putida ATCC 47054 in Pichia Pastoris Using Pir1p as an Anchor Protein.

Yeast cell-surface display technologies have been widely applied in the fields of food, medicine, and feed enzyme production, including lipase, α-amylase, and endoglucanase. In this study, a treS gene was fused with the yeast cell-surface anchor protein gene Pir1p by overlap PCR, the Pir1p-treS fusion gene was ligated into pPICZαA and pGAPZαA and transformed into P. pastoris GS115 to obtain recombinant yeast strains that displays trehalose synthase(TreS) on its cell surface as an efficient and recyclable whole-cell biocatalyst. Firstly, the enhanced green fluorescence protein gene (egfp) was used as the reporter protein to fusion the Pir1p gene and treS gene to construct the recombinant plasmids containing treS-egfg-Pir1p fusion gene, and electrotransformed into P. pastoris GS115 to analyze the surface display characteristics of fusion gene by Western blot, fluorescence microscopy and flow cytometry. The analysis shown that the treS-egfg-Pir1p fusion protein can be successfully displayed on the surface of yeast cell, and the expression level increased with the extension of fermentation time. These results implied that the Pir1p-treS fusion gene can be well displayed on the cell surface. Secondly, in order to obtain surface active cells with high enzyme activity, the enzymatic properties of TreS displayed on the cell surface was analyzed, and the fermentation process of recombinant P. patoris GS115 containing pPICZαA-Pir1p-treS and pGAPZαA-Pir1p-treS was studied respectively. The cell surface display TreS was stable over a broad range of temperatures (10–45°C) and pH (6.0–8.5). The activity of TreS displayed on cell surface respectively reached 1,108 Ug−1 under PAOX1 control for 150 h, and 1,109 Ug−1 under PGAP control for 75h in a 5 L fermenter, respectively. Lastly, the cell-surface displayed TreS was used to product trehalose using high maltose syrup as substrate at pH 8.0 and 15°C. The surface display TreS cells can be recycled for three times and the weight conversion rate of trehalose was more than 60%. This paper revealed that the TreS can display on the P. pastoris cell surface and still had a higher catalytic activity after recycled three times, which was suitable for industrial application, especially the preparation of pharmaceutical grade trehalose products.

Biocatalytic behavior of a new Aspergillus niger whole-cell biocatalyst with high operational stability during the synthesis of green biosolvent isopropyl esters

Using microbial cell-surface displayed enzymes to produce chemicals is a promising green chemistry procedure, but few studies evaluated filamentous fungi cell-surface display systems. Here, a novel Aspergillus niger whole-cell biocatalyst with excellent operational stability was constructed using a heterologous anchor protein, and the details about its practical catalytic characteristics during the synthesis of green biosolvent isopropyl esters (IPEs) were investigated. Candida antarctica lipase B (CALB) was chosen as a model enzyme, fused to a Saccharomyces cerevisiae glycosylphosphatidylinositol protein, SED1, and displayed on the A. niger surface, the hydrolytic activity of the A. niger mycelium-surface displayed CALB reached 440.30U/g dry cell. In solvent-free esterifications of medium-long chain fatty acids and isopropanol, the A. niger/CALB-Flag-SED1 whole-cell biocatalyst showed great organic substrate tolerance, high thermostability, no significant lag time in a dry initial condition and no synthetic activity decrease after five batch reactions at 65°C. The highest yields of isopropyl laurate, isopropyl myristate, and isopropyl palmitate, 79.21, 81.62, and 81.41%, respectively, were obtained after a 6-h reaction. Acetone washing helped to remove the excessive water accumulating during esterification and benefitted the operational stability. The relative acid conversions of the three IPEs in batch 5 were 99.79, 99.10, and 96.83%, respectively, of those in batch 1. The A. niger/CALB-Flag-SED1 whole-cell biocatalyst is a promising alternative to commercial immobilized products, and SED1 can serve as an efficient anchor module to display industrial enzymes in an A. niger expression system.

Cell Surface Display of Cellulase Activity–Free Xylanase Enzyme on Saccharomyces Cerevisiae EBY100

Cellulase-free xylanase has potential for its application in the selective removal of hemicellulose from kraft pulp to give good strength to paper. In this study, a gene (xyn) encoding cellulase activity-free xylanase enzyme (Xyn) was isolated from Paenibacillus polymyxa PPL-3. The xyn gene encoded a protein of 221 amino acids, and the purified Xyn was about 22.5 kDa measured by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Moreover, the cellulase activity-free xylanase enzyme (Xyn) was displayed on the cell surface of Saccharomyces cerevisiae EBY100 using Aga2p as an anchor protein. Cell surface display of xylanase enzyme (Xyn) on S. cerevisiae EBY100 was confirmed by immunofluorescence microscopy. Optimum cell surface display of xylanase enzyme (Xyn) was observed at pH 7 and 40 °C. Therefore, cell surface-displayed xylanase enzyme (Xyn) can be used in the paper industry.

Engineering the cell surface display of cohesins for assembly of cellulosome-inspired enzyme complexes on Lactococcus lactis

BackgroundThe assembly and spatial organization of enzymes in naturally occurring multi-protein complexes is of paramount importance for the efficient degradation of complex polymers and biosynthesis of valuable products. The degradation of cellulose into fermentable sugars by Clostridium thermocellum is achieved by means of a multi-protein "cellulosome" complex. Assembled via dockerin-cohesin interactions, the cellulosome is associated with the cell surface during cellulose hydrolysis, forming ternary cellulose-enzyme-microbe complexes for enhanced activity and synergy. The assembly of recombinant cell surface displayed cellulosome-inspired complexes in surrogate microbes is highly desirable. The model organism Lactococcus lactis is of particular interest as it has been metabolically engineered to produce a variety of commodity chemicals including lactic acid and bioactive compounds, and can efficiently secrete an array of recombinant proteins and enzymes of varying sizes.ResultsFragments of the scaffoldin protein CipA were functionally displayed on the cell surface of Lactococcus lactis. Scaffolds were engineered to contain a single cohesin module, two cohesin modules, one cohesin and a cellulose-binding module, or only a cellulose-binding module. Cell toxicity from over-expression of the proteins was circumvented by use of the nisA inducible promoter, and incorporation of the C-terminal anchor motif of the streptococcal M6 protein resulted in the successful surface-display of the scaffolds. The facilitated detection of successfully secreted scaffolds was achieved by fusion with the export-specific reporter staphylococcal nuclease (NucA). Scaffolds retained their ability to associate in vivo with an engineered hybrid reporter enzyme, E. coli β-glucuronidase fused to the type 1 dockerin motif of the cellulosomal enzyme CelS. Surface-anchored complexes exhibited dual enzyme activities (nuclease and β-glucuronidase), and were displayed with efficiencies approaching 104 complexes/cell.ConclusionsWe report the successful display of cellulosome-inspired recombinant complexes on the surface of Lactococcus lactis. Significant differences in display efficiency among constructs were observed and attributed to their structural characteristics including protein conformation and solubility, scaffold size, and the inclusion and exclusion of non-cohesin modules. The surface-display of functional scaffold proteins described here represents a key step in the development of recombinant microorganisms capable of carrying out a variety of metabolic processes including the direct conversion of cellulosic substrates into fuels and chemicals.

Flow cytometric analysis of DNA binding and cleavage by cell surface-displayed homing endonucleases

LAGLIDADG homing endonucleases (LHEs) cleave 18–24 bp DNA sequences and are promising enzymes for applications requiring sequence-specific DNA cleavage amongst genome-sized DNA backgrounds. Here, we report a method for cell surface display of LHEs, which facilitates analysis of their DNA binding and cleavage properties by flow cytometry. Cells expressing surface LHEs can be stained with fluorescently conjugated double-stranded oligonucleotides (dsOligos) containing their respective target sequences. The signal is absolutely sequence specific and undetectable with dsOligos carrying single base-pair substitutions. LHE–dsOligo interactions facilitate rapid enrichment and viable recovery of rare LHE expressing cells by both fluorescence-activated cell sorting (FACS) and magnetic cell sorting (MACS). Additionally, dsOligos conjugated with unique fluorophores at opposite termini can be tethered to the cell surface and used to detect DNA cleavage. Recapitulation of DNA binding and cleavage by surface-displayed LHEs provides a high-throughput approach to library screening that should facilitate rapid identification and analysis of enzymes with novel sequence specificities.

Protein cell surface display in Gram-positive bacteria: from single protein to macromolecular protein structure

In the course of evolution, Gram-positive bacteria, defined here as prokaryotes from the domain Bacteria with a cell envelope composed of one biological membrane (monodermita) and a cell wall composed at least of peptidoglycan and covalently linked teichoic acids, have developed several mechanisms permitting to a cytoplasmic synthesized protein to be present on the bacterial cell surface. Four major types of cell surface displayed proteins are currently recognized: (i) transmembrane proteins, (ii) lipoproteins, (iii) LPXTG-like proteins and (iv) cell wall binding proteins. The subset of proteins exposed on the bacterial cell surface, and thus interacting with extracellular milieu, constitutes the surfaceome. Here, we review exhaustively the current molecular mechanisms involved in protein attachment within the cell envelope of Gram-positive bacteria, from single protein to macromolecular protein structure.

Display of lipase on the cell surface of Escherichia coli using OprF as an anchor and its application to enantioselective resolution in organic solvent

We have developed a new cell surface display system using a major outer membrane protein of Pseudomonas aeruginosa OprF as an anchoring motif. Pseudomonas fluorescens SIK W1 lipase gene was fused to the truncated oprF gene by C-terminal deletion fusion strategy. The truncated OprF-lipase fusion protein was successfully displayed on the surface of Escherichia coli. Localization of the truncated OprF-lipase fusion protein was confirmed by western blot analysis, immunofluorescence microscopy, and whole-cell lipase activity. To examine the enzymatic characteristics of the cell surface displayed lipase, the whole-cell enzyme activity and stability were determined under various conditions. Cell surface displayed lipase showed the highest activity at 37 degrees C and pH 8.0. It retained over 80% of initial activity after incubation for a week in both aqueous solution and organic solvent. When the E. coli cells displaying lipases were used for enantioselective resolution of racemic 1-phenylethanol in hexane, (R)-phenyl ethyl acetate was successfully obtained with the enantiomeric excess of greater than 96% in 36 h of reaction. These results suggest that E. coli cells displaying lipases using OprF as an anchoring motif can be employed for various biotechnological applications both in aqueous and nonaqueous phases.

Display of bacterial lipase on the Escherichia coli cell surface by using FadL as an anchoring motif and use of the enzyme in enantioselective biocatalysis.

We have developed a novel cell surface display system by employing FadL as an anchoring motif, which is an outer membrane protein involved in long-chain fatty acid transport in Escherichia coli. A thermostable Bacillus sp. strain TG43 lipase (44.5 kDa) could be successfully displayed on the cell surface of E. coli in an active form by C-terminal deletion-fusion of lipase at the ninth external loop of FadL. The localization of the truncated FadL-lipase fusion protein on the cell surface was confirmed by confocal microscopy and Western blot analysis. Lipase activity was mainly detected with whole cells, but not with the culture supernatant, suggesting that cell lysis was not a problem. The activity of cell surface-displayed lipase was examined at different temperatures and pHs and was found to be the highest at 50 degrees C and pH 9 to 10. Cell surface-displayed lipase was quite stable, even at 60 and 70 degrees C, and retained over 90% of the full activity after incubation at 50 degrees C for a week. As a potential application, cell surface-displayed lipase was used as a whole-cell catalyst for kinetic resolution of racemic methyl mandelate. In 36 h of reaction, (S)-mandelic acid could be produced with the enantiomeric excess of 99% and the enantiomeric ratio of 292, which are remarkably higher than values obtained with crude lipase or cross-linked lipase crystal. These results suggest that FadL may be a useful anchoring motif for displaying enzymes on the cell surface of E. coli for whole-cell biocatalysis.

Affinity selection of target cells from cell surface displayed libraries: a novel procedure using thermo-responsive magnetic nanoparticles.

Biotinylated thermo-responsive magnetic nanoparticles for use in affinity selection from yeast cell surface display libraries were prepared by coating magnetite nanoparticles with a thermo-responsive polymer consisting of N-isopropyl acrylamide and a biotin derivative. These particles showed a reversible transition between flocculation and dispersion at around the lower critical solution temperature of 30 degrees C, above which the flocculated particles--which absorbed a large amount of avidin due to their large surface area--were quickly separable by magnet. The model library was constructed by mixing control yeast cells with target yeast cells co-displaying IgG binding protein (ZZ) and enhanced green fluorescence protein. Biotinylated IgG and avidin were subsequently added to the model library, and target cells were efficiently enriched with the biotinylated magnetic nanoparticles by avidin-biotin sandwich and ZZ-IgG interaction. The few target cells (0.001%) in the model library were enriched by up to 100% in only 5 days by an affinity selection procedure repeated four times. This novel method based on magnetic nanoparticles and a yeast cell surface display system could fulfill a wide range of applications in the analysis of protein-protein interactions and rapid isolation of novel biomolecules.