Cell-repellent Surfaces Research Articles

Cellular microarrays for assessing single-cell phenotypic changes in vascular cell populations

Microengineering technologies provide bespoke tools for single-cell studies, including microarray approaches. There are many challenges when culturing adherent single cells in confined geometries for extended periods, including the ability of migratory cells to overcome confining cell-repellent surfaces with time. Following studies suggesting clonal expansion of only a few vascular smooth muscle cells (vSMCs) contributes to plaque formation, the investigation of vSMCs at the single-cell level is central to furthering our understanding of atherosclerosis. Herein, we present a medium throughput cellular microarray, for the tracking of single, freshly-isolated vSMCs as they undergo phenotypic modulation in vitro. Our solution facilitates long-term cell confinement (> 3 weeks) utilising novel application of surface functionalisation methods to define individual culture microwells. We demonstrate successful tracking of hundreds of native vSMCs isolated from rat aortic and carotid artery tissue, monitoring their proliferative capacity and uptake of oxidised low-density lipoprotein (oxLDL) by live-cell microscopy. After 7 days in vitro, the majority of viable SMCs remained as single non-proliferating cells (51% aorta, 78% carotid). However, a sub-population of vSMCs demonstrated high proliferative capacity (≥ 10 progeny; 18% aorta, 5% carotid), in line with reports that a limited number of medial SMCs selectively expand to populate atherosclerotic lesions. Furthermore, we show that, when exposed to oxLDL, proliferative cells uptake higher levels of lipoproteins, whilst also expressing greater levels of galectin-3. Our microwell array approach enables long-term characterisation of multiple phenotypic characteristics and the identification of new cellular sub-populations in migratory, proliferative adherent cell types.Graphical abstract

Significantly improved cell affinity of polydimethylsiloxane enabled by a surface-modified strategy with chemical coupling

Polydimethylsiloxane (PDMS) is a commonly used insulation/packaging material for implantable neural electrodes. Nevertheless, the PDMS-initiated tissue response would lead to the deterioration of the electrode performances post-implantation, owing to its intrinsic hydrophobic and cell-repellent surface. The conventional physical coatings by hydrophilic hydrogels or bioactive molecules are unable to maintain during the long-term implantation due to their low stability by physical adhesion. In this work, we first anchor both hydrophilic polyethylene glycol (PEG) and bioactive molecule poly-L-lysine (PLL) on the PDMS surface by chemical coupling to change the PDMS surface from hydrophobic and cell-repellent to hydrophilic and cell-adhesive. XPS tests indicate the chemically coupled modification layers are stable on the PDMS surface after experiencing a harsh rinse process. Contact angle measurements show that the use of PEG 600 with the moderate molecular weight results in the highest hydrophilicity for the resulting PDMS-PEG-PLL. PC12 cell evaluation results exhibit that the PDMS-PEG-PLL with PEG 600 leads to significantly larger cell adhesion area, more neurite number, and longer neurite length than the PDMS. The PDMS-PEG-PLL with PEG 600 featuring stable modification layers, high hydrophilicity, and superior cell affinity has great potential in stabilizing the neural electrode-tissue interface for the long-term implantation.Graphical abstract

Mimicking of Blood Flow Results in a Distinct Functional Phenotype in Human Non-Adherent Classical Monocytes.

Simple SummaryMonocytes are immune cells of increasing interest as cellular-based therapeutic products in inflammation-related diseases. The underlying mechanism is that isolated monocytes are modified outside the body. After re-injection, monocytes are recruited to the site of inflammation, exerting their therapeutic effect. One current challenge is that isolated monocytes rapidly lose migratory capacity during culture, limiting their therapeutic efficacy. During suspension culture, mimicking blood flow has been shown to preserve the migratory capacity. However, the effects on the inflammatory response and other functional properties have not been studied so far. Hence, the present study investigates the effect of shear flow on cytokine secretion and selected features of human blood-derived classical monocytes. Our results demonstrate that mimicking blood flow resulted in a distinct phenotype with an anti-inflammatory cytokine response and a higher migratory capacity than cultured under static conditions. These features could be particularly relevant for further developing monocyte-based products as unwanted inflammatory signaling at the injection site or peripheral blood circulation will be attenuated.Ex vivo culture conditions during the manufacturing process impact the therapeutic effect of cell-based products. Mimicking blood flow during ex vivo culture of monocytes has beneficial effects by preserving their migratory ability. However, the effects of shear flow on the inflammatory response have not been studied so far. Hence, the present study investigates the effects of shear flow on both blood-derived naïve and activated monocytes. The activation of monocytes was experimentally induced by granulocyte-macrophage colony-stimulating factor (GM-CSF), which acts as a pro-survival and growth factor on monocytes with a potential role in inflammation. Monocytes were cultured under dynamic (=shear flow) or static conditions while preventing monocytes’ adherence by using cell-repellent surfaces to avoid adhesion-induced differentiation. After cultivation (40 h), cell size, viability, and cytokine secretion were evaluated, and the cells were further applied to functional tests on their migratory capacity, adherence, and metabolic activity. Our results demonstrate that the application of shear flow resulted in a decreased pro-inflammatory signaling concurrent with increased secretion of the anti-inflammatory cytokine IL-10 and increased migratory capacity. These features may improve the efficacy of monocyte-based therapeutic products as both the unwanted inflammatory signaling in blood circulation and the loss of migratory ability will be prevented.

Sequential and Switchable Patterning for Studying Cellular Processes under Spatiotemporal Control.

Attachment of adhesive molecules on cell culture surfaces to restrict cell adhesion to defined areas and shapes has been vital for the progress of in vitro research. In currently existing patterning methods, a combination of pattern properties such as stability, precision, specificity, high-throughput outcome, and spatiotemporal control is highly desirable but challenging to achieve. Here, we introduce a versatile and high-throughput covalent photoimmobilization technique, comprising a light-dose-dependent patterning step and a subsequent functionalization of the pattern via click chemistry. This two-step process is feasible on arbitrary surfaces and allows for generation of sustainable patterns and gradients. The method is validated in different biological systems by patterning adhesive ligands on cell-repellent surfaces, thereby constraining the growth and migration of cells to the designated areas. We then implement a sequential photopatterning approach by adding a second switchable patterning step, allowing for spatiotemporal control over two distinct surface patterns. As a proof of concept, we reconstruct the dynamics of the tip/stalk cell switch during angiogenesis. Our results show that the spatiotemporal control provided by our “sequential photopatterning” system is essential for mimicking dynamic biological processes and that our innovative approach has great potential for further applications in cell science.

Evaluation of Spheroid 3D Culture Methods to Study a Pancreatic Neuroendocrine Neoplasm Cell Line.

Pancreatic Neuroendocrine Neoplasms (pNEN) are rare tumors which treatment still represent an important clinical problem, due to the paucity of medical treatments. Due to tumor complexity, techniques as 3D cultures are important to study drug activity in a more realistic model. This study aims to compare three different 3D culture methods in order to understand which one can be considered the best option in terms of experimental easiness and reproducibility in studying the efficacy of a target drug on pNEN. The BON1 cell line was used as a pNEN model and the well-known Receptor Tyrosine Kinase inhibitor Sunitinib was used in order to better investigate the different features of each method. The investigated methods are: (1) 96-well hanging drop plates (HD plates), (2) 24-well plates with a cell-repellent surface, and (3) ultra-low attachment 96-well plates with clear round bottom (ULA plates). The evaluated parameters during the study were: cell seeding, easiness in spheroids formation, morphology, culture maintenance, medium change, spheroids monitoring, picture quality, spheroid perimeter measurement reproducibility error, possibility to perform assays into the seeding plate, overall time of the experiment. Moreover, we investigated how culture methods can influence experimental outcomes evaluating perimeter changes, cell viability and immunohistochemistry of spheroids treated with different Sunitinib concentrations. Results showed that each method has weak and strong points but, considering the easiness of spheroids maintenance and reproducibility results, ULA plates method appears to be the best approach to culture BON1 spheroids and, therefore, to study pNEN.

Investigation on surface properties of superhydrophobic nanocomposites based on polyvinyl chloride and correlation with cell adhesion behavior

The main aim was to study the roles of structural homogeneity and superhydrophobicity on the adhesion of SW colon cancer cells on the surface of polyvinyl chloride (PVC) nanocomposites. Concurrent use of a proper nonsolvent (ethanol) and silica nanoparticles resulted in superhydrophobic behavior and also different surface structures. The effect of added‐ethanol content on the surface properties of PVC nanocomposites was also studied. The synergetic combination of silica and ethanol has led to the formation of a porous surface layer resulting in a considerable boost in the hydrophobic behavior. The scanning electron microscopy, roughness, and X‐ray photoelectron spectroscopy (XPS) analysis results were all in total agreement indicating the substantial change in surface morphology, topography, and composition once the ethanol content was increased to 50 vol.%. The surface structure was notably changed by the addition of polyhedral oligomeric silsesquioxanes (POSS) nanoparticles. It was found that the induced inhomogeneity as a result of POSS addition had an adverse effect on the surface properties. In conclusion, superhydrophobicity could be regarded as a prerequisite for achieving cell‐repellent behavior, but it cannot guarantee a cell repellent surface especially if the surface layer possesses structural inhomogeneity.

Advanced Development of Primary Pancreatic Organoid Tumor Models for High-Throughput Phenotypic Drug Screening

Traditional high-throughput drug screening in oncology routinely relies on two-dimensional (2D) cell models, which inadequately recapitulate the physiologic context of cancer. Three-dimensional (3D) cell models are thought to better mimic the complexity of in vivo tumors. Numerous methods to culture 3D organoids have been described, but most are nonhomogeneous and expensive, and hence impractical for high-throughput screening (HTS) purposes. Here we describe an HTS-compatible method that enables the consistent production of organoids in standard flat-bottom 384- and 1536-well plates by combining the use of a cell-repellent surface with a bioprinting technology incorporating magnetic force. We validated this homogeneous process by evaluating the effects of well-characterized anticancer agents against four patient-derived pancreatic cancer KRAS mutant-associated primary cells, including cancer-associated fibroblasts. This technology was tested for its compatibility with HTS automation by completing a cytotoxicity pilot screen of ~3300 approved drugs. To highlight the benefits of the 3D format, we performed this pilot screen in parallel in both the 2D and 3D assays. These data indicate that this technique can be readily applied to support large-scale drug screening relying on clinically relevant, ex vivo 3D tumor models directly harvested from patients, an important milestone toward personalized medicine.

Flagellin based biomimetic coatings: From cell-repellent surfaces to highly adhesive coatings

Biomimetic coatings with cell-adhesion-regulating functionalities are intensively researched today. For example, cell-based biosensing for drug development, biomedical implants, and tissue engineering require that the surface adhesion of living cells is well controlled. Recently, we have shown that the bacterial flagellar protein, flagellin, adsorbs through its terminal segments to hydrophobic surfaces, forming an oriented monolayer and exposing its variable D3 domain to the solution. Here, we hypothesized that this nanostructured layer is highly cell-repellent since it mimics the surface of the flagellar filaments. Moreover, we proposed flagellin as a carrier molecule to display the cell-adhesive RGD (Arg-Gly-Asp) peptide sequence and induce cell adhesion on the coated surface. The D3 domain of flagellin was replaced with one or more RGD motifs linked by various oligopeptides modulating flexibility and accessibility of the inserted segment. The obtained flagellin variants were applied to create surface coatings inducing cell adhesion and spreading to different levels, while wild-type flagellin was shown to form a surface layer with strong anti-adhesive properties. As reference surfaces synthetic polymers were applied which have anti-adhesive (PLL-g-PEG poly(l-lysine)-graft-poly(ethylene glycol)) or adhesion inducing properties (RGD-functionalized PLL-g-PEG). Quantitative adhesion data was obtained by employing optical biochips and microscopy. Cell-adhesion-regulating coatings can be simply formed on hydrophobic surfaces by using the developed flagellin-based constructs. The developed novel RGD-displaying flagellin variants can be easily obtained by bacterial production and can serve as alternatives to create cell-adhesion-regulating biomimetic coatings. Statement of SignificanceIn the present work, we show for the first time that-an oriented and dense monolayer of flagellin molecules mimics the surface of the bacterial flagellar filament. Consequently, the fabricated layer is completely cell repellent.-By genetically modifying flagellin, we incorporate cell adhesion regulating functionalities into this anti-adhesive coating.-We can easily tune the adhesion of living cells from completely cell repellent to highly adhesive.

Cell Patterning with Mucin Biopolymers

The precise spatial control of cell adhesion to surfaces is an endeavor that has enabled discoveries in cell biology and new possibilities in tissue engineering. The generation of cell-repellent surfaces currently requires advanced chemistry techniques and could be simplified. Here we show that mucins, glycoproteins of high structural and chemical complexity, spontaneously adsorb on hydrophobic substrates to form coatings that prevent the surface adhesion of mammalian epithelial cells, fibroblasts, and myoblasts. These mucin coatings can be patterned with micrometer precision using a microfluidic device, and are stable enough to support myoblast differentiation over seven days. Moreover, our data indicate that the cell-repellent effect is dependent on mucin-associated glycans because their removal results in a loss of effective cell-repulsion. Last, we show that a critical surface density of mucins, which is required to achieve cell-repulsion, is efficiently obtained on hydrophobic surfaces, but not on hydrophilic glass surfaces. However, this limitation can be overcome by coating glass with hydrophobic fluorosilane. We conclude that mucin biopolymers are attractive candidates to control cell adhesion on surfaces.

Induction of Cell–Cell Connections by Using in situ Laser Lithography on a Perfluoroalkyl‐Coated Cultivation Platform

This article describes a novel laser-directed microfabrication method carried out in aqueous solution for the organization of cell networks on a platform. A femtosecond (fs) laser was applied to a platform culturing PC12, HeLa, or normal human astrocyte (NHA) cells to manipulate them and to facilitate mutual connections. By applying an fs-laser-induced impulsive force, cells were detached from their original location on the plate, and translocated onto microfabricated cell-adhesive domains that were surrounded with a cell-repellent perfluoroalkyl (R(f)) polymer. Then the fs-laser pulse-train was applied to the R(f) polymer surface to modify the cell-repellent surface, and to make cell-adhesive channels of several μm in width between each cell-adhesive domain. PC12 cells elongated along the channels and made contact with others cells. HeLa and NHA cells also migrated along the channels and connected to the other cells. Surface analysis by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) confirmed that the R(f) polymer was partially decomposed. The method presented here could contribute not only to the study of developing networks of neuronal, glial, and capillary cells, but also to the quantitative analysis of nerve function.

Surface modification of thermoplastic polyurethane in order to enhance reactivity and avoid cell adhesion

Recently, the definition of coating procedures which leads to strong cell repellent surfaces has been an extremely important issue. In the present study, the cell repellency of thermoplastic polyurethane material (Elastollan®1180A50) surfaces was achieved by chemical treatment. Samples of Elastollan®1180A50 processed by injection molding, were oxidized with hydrogen peroxide (H2O2) and then impregnated with poly(ethylene glycol). The oxidation time was evaluated as were the effects of the PEG impregnation. Of all the evaluated modifications, a surface oxidation for 2 h, followed by impregnation with poly(ethylene glycol) resulted in the best cell repellent surface.

Neural stem cells from human cord blood on bioengineered surfaces—Novel approach to multiparameter bio-tests

Stem cell technology combined with emerging surface nano/micro-technologies provides a new tool for better understanding of the mechanisms involved in cell fate decisions and compound-induced adverse reactions. This article provides state-of-the-art on the development of modern multiparameter bio-tests based on interactions between neural stem cells derived from human cord blood and bioengineered surfaces. Cell growth platforms with controlled content, geometry and spatial distribution of bioactive and stem cell attractive areas were fabricated either by micro-contact printing or piezoelectric spotting of polycationic biomolecules or extracellular matrix proteins (ECM) on cell-repellent surfaces. HUCB-NSCs were shown to adhere, differentiate and respond to neurotoxic MeHgCl on functional domains in a manner dependent on protein type and concentration, cell density and serum conditions. While receptor-mediated interactions with ECM proteins under absence of serum promote neuronal differentiation, non-specific adhesion to polycationic molecules maintain cells attached to the surface in non-differentiated stage. Functional domains were further engineered to create “smart” microenvironment by immobilizing to the surface signaling molecules together with ECM proteins. Stimulation of selected intracellular pathways by molecules of Wnt, Shh, CNTF or Notch type resulted in differentiation of HUCB-NSC to either neuronal or astroglial lineage. Sensor techniques applied to HUCB-NSC included measurements of electrical activity using multielectrode array chips. Spontaneous electrical field potentials of HUCB-NSCs were dependent upon developmental stage of tested cells. Bioengineered surfaces, on protein microarrays and micro-electrode array chips provide a novel approach to the multiparameter bio-tests by adding an important information on the sensitivity of certain molecular pathways and functional cellular responses to selected neurotoxins.

Deposition of Electrospun Fibers on Reactive Substrates forIn VitroInvestigations

Recent in vitro studies with electrospun nanofibers have used a range of techniques. The in vitro system presented in this article describes electrospun fibers deposited onto chemically reactive substrates to provide fiber adherence and surface chemistry control of the substrate. Fibers of poly(epsilon-caprolactone) (PCL) or of a blend of PCL and collagen type I (C/PCL) were electrospun directly onto collectors coated with isocyanate-terminated star (polyethylene glycol) (sPEG). Alternatively, parallel electrospun fibers were collected on dual collectors in "dilute" quantities and transferred onto sPEG-coated substrates. The initial reactive nature of the substrates allows the collection of very few fibers, which adhere well during frequent washes. Furthermore, the sPEG layer transforms into protein-repellent substrates with the additional potential to include specific cellular mediators such as glycine-arginine-glycine-aspartate-serine (GRGDS) peptides to promote cell adhesion. Therefore, the fiber and substrate chemistry can be modified independently, which is particularly useful for in vitro studies of guided migrating cells. In the present work, dissociated cells of dorsal root ganglia seeded onto the substrates were investigated to assess the influence of different combinations of fiber material, fiber orientation, and surface functionalization. Cell adhesion was observed predominantly on the nanofibers, except when the sPEG layer on the substrate contained GRGDS. On the cell-repellent sPEG substrates, neurites were aligned in direct contact with parallel C/PCL fibers and less so with PCL fibers. In contrast, neurite alignment showed less guidance effect with C/PCL electrospun fibers on the GRGDS/sPEG-coated substrates. Therefore, the combination of oriented biologically active fibers on cell-repellent surfaces enhanced the guidance of such cells. These reactive substrate systems provide a multitude of in vitro combinations for providing cells with specific mediators and, in turn, defining the optimum environment of regenerating devices for in vivo studies.

Micro-stamped surfaces for the patterned growth of neural stem cells

We present a method for patterning neural stem cells based on pre-patterning polypeptides on a cell-repellent surface (poly(ethylene) oxide-like, PEO-like, plasma-deposited films). The method ensures cell attachment and stability for several weeks, as well as it allows cell migration and differentiation. Various patterns of ∼1 nm thick cell adhesive poly- l-lysine (PLL) have been created on a cell-repellent PEO-like matrix by microcontact printing using different array configurations and printing conditions. The cell-repellent property of PEO-like film determined the confinement of the cells on the printed patterns. Optimization of the printing method showed that the most homogeneous patterns over large areas were obtained using PLL diluted in carbonate buffer (100 m m) at pH 8.4. Neural stem cells cultured on the PLL patterns in low serum and in differentiating medium over 20 days exhibited a good confinement to the polypeptide domains. The number of cells attached increased linearly with the micro-stamped PLL area. The cells were able to extend random axon-like projections to the outside of the patterns and presented high amount of ramifications when cultured in differentiating medium. Migration and axon-like outgrowth have been successfully guided by means of an interconnected squares configuration. The surfaces are suitable for controlling the patterning of stem cells and provide a platform for the assessment of the way how different cell arrangements and culture conditions influence cell interactions and cell developmental processes.

Switching On Cell Adhesion with Microelectrodes

With sincere regret, we would like to inform the readers that our recent Communication quoted from Nishizawa and co-workers1 without marking it as such. This refers in particular to the first two sentences of our paper. In addition, phrases in lines 20–30 and 66–71 are very similar to parts of references 1 and 2 without indication of their origin. Moreover, we would like to emphasize that the scientific concept of the electrochemical drawing of cell-adhesive regions, which enables the multipatterning of different cells, was proposed and demonstrated for the first time by Nishizawa and co-workers in reference 2. This statement was deleted in the process of shortening the manuscript and was not reinserted, and our claim of introducing an alternative strategy (lines 73–76) is misleading. References 1 and 2 were cited as reference [11] in our Communication only in the context of a side aspect of the study. The reports by Nishizawa and co-workers in references 1 and 2 describe the local generation of HBrO (or Br2) in a scanning electrochemical microscopy (SECM) configuration to alter a cell-repellent surface that consists of a physisorbed serum albumin layer on a glass support.1 Subsequently, adhesion and motility of HeLa cells could be observed at these regions.2 The method could be used for stepwise introduction of new HeLa cell populations.2 The local oxidative treatment of surfaces by a bromide oxidation pulse in an SECM apparatus was already introduced much earlier by Mandler and Bard3 and since then has been used for many surface modifications. Our Communication described the use of chemisorbed oligoethylene glycol terminated alkanethiols that are bound as a self-assembled monolayer to a gold support. Such layers are frequently used as a standard surface that resists protein adsorption and cell adhesion. We demonstrated that the monolayer can be switched to allow protein adsorption and cell adhesion by local treatment with Br2 as described in references 1 and 2. We used the permeability change of the self-assembled monolayer during the patterning to characterize the modified surfaces by feedback imaging in SECM. In this way, we could characterize independently the extent of the modified area (which is not identical) after Br2 treatment, after the adsorption of proteins, and after cell adhesion. Finally, we reemphasize our regret at this oversight and wish to give full credit to Nishizawa and co-workers for the idea of using a local oxidative treatment to lift the cell-repellent properties of surfaces through the recent improvements and applications that they have described.4–6

Polymer-Templated Microarrays for Highly Reliable Plaque Purification

To infect cells with a particular multiplicity of infection, it is essential to know the concentration of virus in the inoculum. Here we describe a highly reliable and controllable method for plaque purification using cell-repellent surfaces micropatterned on the substrate. Micropatterning of localized chemical or biochemical domains has the potential to become a powerful tool in controlling the seeding of cells. The cell array was reliably fabricated with micropatterned surfaces, and the number of cells in a pattern was easily controlled by the cell density in the media and micropattern size. The cell micropatterns were infected with baculoviruses to form an array of virus plaques. GFP-modified and wild-type baculoviruses were used to verify the feasibility of purifying a specific plaque. Using confocal microscopy, GFP-expressing plaques were readily selectable and removable.

Simple and versatile methods for the fabrication of arrays of live mammalian cells

Single-step methods for the generation of patterned surfaces on hydrogels are presented. Poly(vinyl alcohol) films covalently bonded on glass cover slips and commercially available hydrogel-coated polystyrene plates were used as cell-repellent surfaces. Cell-adhesive domains were created by spotting dilute solutions of sodium hypochlorite onto the surfaces. Alternatively, domains supporting cell attachment were created by exposure to UV light from a xenon excimer lamp, employing a contact mask. Rat skeletal myoblast cells, HEK 293 human embryonic kidney cells and Caco-2 colon carcinoma cells adhered and spread exclusively on modified areas. The surfaces are durable for weeks under cell culture conditions and re-usable after removal of the cells by trypsin treatment. Arrays of adhesive spots seeded with cells at a low density permitted dynamic monitoring of cell proliferation. Selected colonies can be harvested from the surfaces by means of local trypsination. Thus, these techniques may provide useful tools for the isolation of clonal cell populations. Additionally, we demonstrate the possibility of surface-mediated gene delivery from the micro patterns. We show that DNA, complexed with a lipid reagent, can be adsorbed on modified poly(vinyl alcohol) coatings, resulting in spatially controlled adhesion and reverse transfection of HEK 293 cells.