Cell Plating Density Research Articles

Biomodulatory Effects of Molecular Delivery in Human T Cells Using 3D-Printed Acoustofluidic Devices

ObjectiveCell-based therapies have shown significant promise for treating many diseases, including cancer. Current cell therapy manufacturing processes primarily utilize viral transduction to insert genomic material into cells, which has limitations, including variable transduction efficiency and extended processing times. Non-viral transfection techniques are also limited by high variability or reduced molecular delivery efficiency. Novel 3D-printed acoustofluidic devices are in development to address these challenges by delivering biomolecules into cells within seconds via sonoporation. MethodsIn this study, we assessed biological parameters that influence the ultrasound-mediated delivery of fluorescent molecules (i.e., calcein and 150 kDa FITC-Dextran) to human T cells using flow cytometry and confocal imaging. ResultsLow cell plating densities (100,000 cells/mL) enhanced molecular delivery compared to higher cell plating densities (p < 0.001), even though cells were resuspended at equal concentrations for acoustofluidic processing. Additionally, cells in the S phase of the cell cycle had enhanced intracellular delivery compared to cells in the G2/M phase (p < 0.001) and G0/G1 phase (p < 0.01), while also maintaining higher viability compared to G0/G1 phase (p < 0.001). Furthermore, the calcium chelator (EGTA) decreased overall molecular delivery levels. Confocal imaging indicated that the actin cytoskeleton had important implications on plasma membrane recovery dynamics after sonoporation. In addition, confocal imaging indicates that acoustofluidic treatment can permeabilize the nuclear membrane, which could enable rapid intranuclear delivery of nucleic acids. ConclusionsThe results of this study demonstrate that a 3D-printed acoustofluidic device can enhance molecular delivery to human T cells, which may enable improved techniques for non-viral processing of cell therapies.

Abstract TP305: microRNA-182 Preserves Oxidative Phosphorylation During Substrate Limitation in Both Male and Female Primary Astrocyte Cultures

Introduction: Stroke remains the leading cause of long-term disability in the United States, with therapy remaining limited to early reperfusion interventions. Adjuvants that aim to preserve neuronal survival could provide functional benefits to stroke survivors. Astrocytes promote neuronal survival by providing metabolic support to neurons in the absence of glucose availability, a critical substrate required for neuronal metabolism and survival. MicroRNAs (miRs) are non-coding RNAs that suppress translation of target genes. Our prior work identified miR-182 as a critical modulator of stroke by targeting genes that preserve astrocyte mitochondrial function. In the present study we assessed the role of miR-182 inhibition on oxygen consumption rate (OCR) during glucose deprivation (GD) injury. As stroke-induced mitochondrial dysfunction occurs mechanistically differently between males and females, we compared the effect of miR-182 inhibition between male and female astrocytes. Methods: Primary male and female cortical astrocyte cultures were generated from neonatal male and female C57BL/6 mice. Cultures were maintained at ambient O 2 tension and 5% CO 2 until day-in-vitro 12. Cultures were randomized to transfection with miR-182 inhibitor, or mismatch control RNA, 24h prior to 72h of GD injury. OCR was measured using the Lucid Scientific Recipher TM . Cell plating density was assessed using the nuclear stain DAPI. Results: No significant differences between treatments or between sexes in cell density were observed. GD injury resulted in a progressive decrease in OCR, requiring 12.5+7.8h to become significantly (p&lt;0.05) lower in male astrocyte cultures, and 12.5+6.4h in females, with no difference between sexes. Comparatively, time-to-reach a lower OCR with miR-182 inhibitor required 38+7.1h in male cultures and 47+12.7h in females. The time-to-reach a lower OCR with miR-182 inhibition was significantly greater in both sexes versus control transfection, but not between sexes with miR-182 inhibition. Conclusions: These results suggest that inhibition of miR-182 represents a novel target to indirectly support neuronal metabolism during stroke that could be applied to both men and women survivors of stroke to improve functional outcomes.

A Conceptual Approach for Examining Effects of the Adolescent Bone Marrow Milieu on MSC Phenotype.

Children with bone fragility often exhibit elevated bone marrow lipid levels, which may affect mesenchymal stem cell (MSC) differentiation potential and ultimately bone strength via cell-autonomous and/or non-cell-autonomous factors. Here, we use standard co-culture techniques to study biological effects of bone marrow cell-derived secretome on MSC. Bone marrow was collected during routine orthopedic surgery, and the entire marrow cell preparation, with or without red blood cell (RBC) reduction, was plated at three different densities. Conditioned medium (secretome) was collected after 1, 3, and 7 days. ST2 cells, a murine MSC line, were then cultured in the secretomes. Exposure to the secretomes was associated with reductions of up to 62% in MSC MTT outcomes that depended on the duration of secretome development, as well as marrow cell plating density. Reduced MTT values were not associated with diminished cell number and viability assessed using Trypan Blue exclusion. Expression of pyruvate dehydrogenase kinase 4 was modestly elevated, and β-actin levels were transiently reduced in ST2 cells exposed to secretome formulations that had elicited maximal reductions in MTT outcomes. The findings from this study can inform the design of future experimental studies to examine contributions of cell-autonomous and non-cell-autonomous factors in the bone marrow to MSC differentiation potential, bone formation, and skeletal growth. © 2023 The Authors. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research.

Density dependent regulation of inflammatory responses in macrophages.

Macrophage distribution density is tightly regulated within the body, yet the importance of macrophage crowding during in vitro culture is largely unstudied. Using a human induced pluripotent stem cell (iPSC)-derived macrophage model of tissue resident macrophages, we characterize how increasing macrophage culture density changes their morphology and phenotype before and after inflammatory stimulation. In particular, density drives changes in macrophage inflammatory cytokine and chemokine secretion in both resting and activated states. This density regulated inflammatory state is also evident in blood monocyte derived-macrophages, the human monocytic THP-1 immortalized cell line, and iPSC-derived microglia. Density-dependent changes appear to be driven by a transferable soluble factor, yet the precise mechanism remains unknown. Our findings highlight cell plating density as an important but frequently overlooked consideration of in vitro macrophage research relevant to a variety of fields ranging from basic macrophage cell biology to disease studies.

Interaction between adipoderivated mesenchymal stem cells and PLGA/PIepox scaffold with possible use in tissue engineering: in vitro study

The objective of this work was to evaluate the interaction between human mesenchymal cells adipoderived with PLGA/PIepox scaffold made by the centrifugation technique. The best plating cell density was predicted between 0.32 × 105, 0.65 × 105 and 1.3 × 105 and the best culture time between 24, 48, 72 h. The metabolic activity of the tested groups was similar to their respective controls, except for the higher density and longer cultivation time, which were metabolically more active. The association between the PLGA/PIepox scaffold and adipoderived mesenchymal cells can be considered for future in vivo studies in tissue engineering.

Abstract 1008: Cell density-related variability in chemotherapeutic resistance patterns in human cancer cells

Abstract Assessment of chemosensitivity and resistance varies with cancer cell of origin, drug and culture conditions. However, it is also not uncommon to find multiple different IC50 values for the same chemotherapeutic treatments acting on the same tumor cell lines. The aim of this research was to investigate this discrepancy in phenotypes and elucidate relevant variables that influence them. We assessed chemosensivity as a function of tumor cell density by plating TOV-21G ovarian, HT29 colorectal, and U2OS osteosarcoma cell lines in 96-well plates at various seeding densities per well and treated them with various concentrations of cisplatin, 5-fluorouracil (5-FU), and etoposide, respectively. CellTiter Glo assays were performed at 72 hours of treatment to determine IC50. Cisplatin IC50 for TOV-21G cells plated at 50,000, 20,000, 10,000, 5,000, 2,000, 1,000, and 500 cells/well were 12.00 μM, 5.47 μM, 3.16 μM, 2.45 μM, 2.54 μM, 2.83 μM, and 2.66 μM, respectively. Etoposide IC50 for U2OS cells plated at the same seeding densities were 6.50 μM, 5.19 μM, 3.23 μM, 2.98 μM, 2.49 μM, 2.13 μM, and 1.88 μM, respectively. IC50 values for HT29 cells treated with 5-FU at 2,000, 1,000, and 500 cells/well were 35.89 μM, 19.74 μM, and 13.42 μM, respectively. TOV-21G, U2OS, and HT29 cells all showed differences in IC50 values depending on cell plating density. TOV-21G and U2OS cells both showed a gradual decrease and plateau in IC50 as the cancer cell density decreased from 50,000 cells/well to 500 cells/well. HT29 cells displayed a sharper IC50 decrease as the cell density decreased from 2,000 cells/well to 500 cells/well. Our experiments demonstrate that IC50 values are not static at 72 hours and that tumor cell density is an important variable in influencing observed tumor resistance to traditionally effective drugs. As the density of cancer cells increases, the cells develop more resistance to the associated chemotherapy and require higher quantities of drug to achieve the same level of growth inhibition. We are currently exploring underlying molecular mechanisms that may influence these changes in IC50 including cell survival signaling proteins, cell-cell contact or growth factors that may influence cell density-related chemoresistance. Citation Format: Thomas Brown, Ujwal Punyamurtula, Jill Strandberg, Wafik S. El-Deiry. Cell density-related variability in chemotherapeutic resistance patterns in human cancer cells [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2022; 2022 Apr 8-13. Philadelphia (PA): AACR; Cancer Res 2022;82(12_Suppl):Abstract nr 1008.

Optimization of Human Neural Progenitor Cells for an Imaging-Based High-Throughput Phenotypic Profiling Assay for Developmental Neurotoxicity Screening.

Studies in in vivo rodent models have been the accepted approach by regulatory agencies to evaluate potential developmental neurotoxicity (DNT) of chemicals for decades. These studies, however, are inefficient and cannot meet the demand for the thousands of chemicals that need to be assessed for DNT hazard. As such, several in vitro new approach methods (NAMs) have been developed to circumvent limitations of these traditional studies. The DNT NAMs, some of which utilize human-derived cell models, are intended to be employed in a testing battery approach, each focused on a specific neurodevelopmental process. The need for multiple assays, however, to evaluate each process can prolong testing and prioritization of chemicals for more in depth assessments. Therefore, a multi-endpoint higher-throughput approach to assess DNT hazard potential would be of value. Accordingly, we have adapted a high-throughput phenotypic profiling (HTPP) approach for use with human-derived neural progenitor (hNP1) cells. HTPP is a fluorescence-based assay that quantitatively measures alterations in cellular morphology. This approach, however, required optimization of several laboratory procedures prior to chemical screening. First, we had to determine an appropriate cell plating density in 384-well plates. We then had to identify the minimum laminin concentration required for optimal cell growth and attachment. And finally, we had to evaluate whether addition of antibiotics to the culture medium would alter cellular morphology. We selected 6,000 cells/well as an appropriate plating density, 20 µg/ml laminin for optimal cell growth and attachment, and antibiotic addition in the culture medium. After optimizing hNP1 cell culture conditions for HTPP, it was then necessary to select appropriate in-plate assay controls from a reference chemical set. These reference chemicals were previously demonstrated to elicit unique phenotypic profiles in various other cell types. Aphidicolin, bafilomycin A1, berberine chloride, and cucurbitacin I induced robust phenotypic profiles as compared to dimethyl sulfoxide vehicle control in the hNP1 cells, and thus can be employed as in-plate assay controls for subsequent chemical screens. We have optimized HTPP for hNP1 cells, and consequently this approach can now be assessed as a potential NAM for DNT hazard evaluation and results compared to previously developed DNT assays.

3-D multi-electrode arrays detect early spontaneous electrophysiological activity in 3-D neuronal-astrocytic co-cultures.

Three-dimensional (3-D) neural cultures represent a promising platform for studying disease and drug screening. Tools and methodologies for measuring the electrophysiological function in these cultures are needed. Therefore, the purpose of this work was primarily to develop a methodology to interface engineered 3-D dissociated neural cultures with commercially available 3-D multi-electrode arrays (MEAs) reliably over 3weeks to enable the recording of their electrophysiological activity. We further compared the functional output of these cultures to their structural and synaptic network development over time. We reliably interfaced a primary rodent neuron-astrocyte (2:1) 3-D co-culture (2500 cells/mm3 plating cell density) in Matrigel™ (7.5mg/mL) that was up to 750µm thick (30-40 cell-layers) with spiked 3-D MEAs while maintaining high viability. Using these MEAs we successfully recorded the spontaneous development of neural network-level electrophysiological activity and measured the development of putative synapses and neuronal maturation in these co-cultures using immunocytochemistry over 3weeks in vitro. Planar (2-D) MEAs interfaced with these cultures served as recording controls. Neurons within this interfaced 3-D culture-MEA system exhibited considerable neurite outgrowth, networking, neuronal maturation, synaptogenesis, and culture-wide spontaneous firing of synchronized spikes and bursts of action potentials. Network-wide spikes and synchronized bursts increased rapidly (first detected at 2days) during the first week in culture, plateaued during the second week, and reduced slightly in the third week, while maintaining high viability throughout the 3-week culturing period. Early electrophysiology activity occurred prior to neuronal process maturation and significant synaptic density increases in the second week. We successfully interfaced 3-D neural co-cultures with 3-D MEAs and recorded the electrophysiological activity of these cultures over 3weeks. The initial period of rapid increase in electrophysiological activity, followed by a period of neuronal maturation and high-level of synapse formation in these cultures suggests a developmental homeostatic process. This methodology can enable future applications both in fundamental investigations of neural network behavior and in translational studies involving drug testing and neural interfacing.

Colony-forming unit assay as a potency test for hematopoietic stem/progenitor cell products

Colony-forming unit (CFU) assay is a short-term culture assay used for the detection of functionally active hematopoietic progenitor cells (HPCs) in the in vitro setting. This potency assay enables the identification of colony-producing HPCs in any type of hematopoietic stem cell/progenitor product (HSC/P) including bone marrow (BM), cord blood (CB) and mobilized peripheral blood (MPB). It has been shown that the frequency of HPCs in BM, MPB and CB cellular products directly correlates with the engraftment of both neutrophils and platelets as well as with the overall survival of recipients following hematopoietic stem cell transplantation which makes the CFU assay a good quality parameter for the prediction of engraftment success. The aim of this article is to provide an overview of different approaches to setting up the CFU assay with an emphasis on different sample preparation techniques, cell plating density and colony identification and enumeration used by different laboratories.

Manufacturing mesenchymal stromal cells for clinical applications: A survey of Good Manufacturing Practices at U.S. academic centers

Background aimsMesenchymal stromal cells (MSC) have gained prominence in the field of regenerative medicine due to their excellent safety profile in human patients and recently demonstrated efficacy in late-stage clinical studies. A prerequisite to achieving successful MSC-based therapies is the development of large-scale manufacturing processes that preserve the biological potency of the founder cell population. Because no standardized manufacturing process exists for MSCs, understanding differences in these processes among U.S. academic facilities would allow for better comparison of results obtained in the clinical setting. MethodsWe collected information through a questionnaire sent to U.S. academic centers that produce MSCs under Good Manufacturing Practice conditions. ResultsThe survey provided information on the number and geographic location of academic facilities in the United States and major trends in their manufacturing practices. For example, most facilities employed MSCs enriched from bone marrow by plastic adherence and expanded in media supplemented with pooled human platelet lysate. Sterility testing and product identification via cell surface phenotype analysis were commonly reported practices, whereas initial and working cell plating densities, culture duration, product formulation and the intended use of the MSC product were highly variable among facilities. The survey also revealed that although most facilities assessed product potency, the methods used were limited in scope compared with the broad array of intended clinical applications of the product. ConclusionsSurvey responses reported herein offer insight into the current best practices used to manufacture MSC-based products in the United States and how these practices may affect product quality and potency. The responses also provide a foundation to establish standardized manufacturing platforms.

Morphometric and computational assessments to evaluate neuron survival and maturation within compartmentalized microfluidic devices: The influence of design variation on diffusion-driven nutrient transport

Burgeoning use of segregated microfluidic platforms that parse somas and neurites into discrete compartments is fueling unique examinations of neuronal structure and physiology in a manner impossible to achieve with non-compartmentalized systems. However, even though this line of axon-soma polarizing microfluidic devices stems from the same general design of a Campenot chamber set-up, slight deviations in device geometry appear to induce vastly different nutrient transport profiles that influence neuron survival and maturation. Here we examine the uptake of nerve growth factor (NGF) by a pheochromocytoma PC12 cell line cultured using two Campenot-like device designs, a “Standard” layout, representative of a commercial device, and a custom “Notch” layout, predicted to encourage more efficient nutrient transfer that gives rise to sustained neuron viability and extensive neurite elaboration. Exploiting in vitro culture schemes coupled with computational analyses, we identify the influence of device design geometry on the interplay between neuronal survival and maturation, gauged from morphometric assessments and the spatiotemporal distribution of NGF. Computer simulations of NGF transport within the devices revealed that the microfluidic neuron culture system is highly sensitive to change, where nutrient transport is intricately linked to device geometry and cell plating density, and premature depletion of nutrients is observed if specific design criteria are not met. This study underscores the importance of validating specific device geometries for a particular neuro-based assessment, while showcasing computational modeling as a powerful tool to achieve this goal.

Initial cell plating density affects properties of human primary synovial mesenchymal stem cells

ABSTRACTSynovial mesenchymal stem cells (MSCs) appear to be an attractive cell source in cartilage and meniscus regeneration because of their high proliferative and chondrogenic potentials. Two methods are used to culture synovial nucleated cells in the preparation of primary synovial MSCs. In one method, the cells are plated at low density to make cell colonies. In the other method, the cells are plated at high density. We investigated the effects of initial cell density on proliferation, surface markers, and multipotentiality, including chondrogenesis in primary synovial MSCs. Human synovium was obtained from the knee joints of patients with osteoarthritis after total knee arthroplasty. Immediately after enzyme digestion, the synovial nucleated cells were plated in densities of 103, 104, or 105 cells/60‐cm2 dish and cultured for 14 days. Proliferation, surface markers, chondrogenesis, adipogenesis, and calcification were examined in three populations. The cell colonies were distinct in the 103 cells/dish group, faint in the 104 cells/dish group, and obscure in the 105 cells/dish group. The total number of cells/dish was positively related to plating density, whereas the fold increase was negatively related to plating density (n = 13). Among 12 surface markers, a negative relation to plating density was distinct in CD105. The cartilage pellet weight was negatively related to the initial plating density. The oil red‐o positive area and alizarin red positive area were positively related to the initial plating density. The initial cell plating density affected the properties of primary synovial MSCs. Synovial nucleated cells proliferated better when plated at low density, and the synovial MSCs obtained by this method contained a high chondrogenic potential. © 2018 The Authors. Journal of Orthopaedic Research® Published by Wiley Periodicals, Inc. J Orthop Res 37:1358–1367, 2019.

Simultaneous isolation of two different stem cell populations from murine dermis by increasing the plating cell density

Simultaneous isolation of two different stem cell populations from murine dermis by increasing the plating cell density

Optimization of episomal reprogramming for generation of human induced pluripotent stem cells from fibroblasts

ABSTRACTGeneration of induced pluripotent stem cells (iPSCs) by defined factors (OCT4, SOX2, C-MYC, and KLF4) from various human primary cells has been reported. Human fibroblasts have been widely used as a cellular source in reprogramming studies over recent decades. The original method of iPSC generation uses retro- or lentivirus vectors that require integration of viral DNA into the target cells. The integration of exogenous genes encoding transcription factors (OCT4, SOX2, C-MYC, and KLF4) can be detected in iPSCs, raising concern about the risk of mutagenesis and tumor formation. Therefore, stem cell therapy would ideally require generation of integration-free iPSCs using non-integration gene delivery system such as Sendai virus, recombinant proteins, synthetic mRNA, and episomal vectors. Several groups have reported that episomal vectors are capable of reprogramming human fibroblasts into iPSCs. Although vector concentration and cell density are important in the episomal vector reprogramming method, optimization of this method for human fibroblasts has not been reported. In this study, we determined optimal conditions for generating integration-free iPSCs from human fibroblasts through the use of different concentrations of episomal vectors (OCT4/p53, SOX2/KLF4, L-MYC/LIN28A) and different plating cell density. We found that optimized vector concentration and cell density accelerate reprogramming and improve iPSC generation. Our study provides a detailed stepwise protocol for improved generation of integration-free iPSCs from human fibroblasts by transfection with episomal vectors.

Analysis of gene expression in filamentous cells of Candida albicans grown on agar plates.

Candida albicans (C. albicans) is a commensal organism of the human gastrointestinal and genitourinary tracts. C. albicans is also a major human pathogen, causing disease ranging from cutaneous infections to lethal systemic disease. The ability of this fungus to switch between yeast and filamentous forms of growth has long been linked to its pathogenesis. Filamentation can be induced by a variety of distinct environmental cues and can occur in either liquid or solid media. While some evidence suggests that there are differences between filamentation in solid and liquid media, gene expression analysis of filamentation in C. albicans has focused strictly on cells grown in liquid media. We have developed a method for analyzing gene expression of filamentous cells grown on solid induction media at early stages of filamentation, establishing cell plating densities, ideal collection times, and collection techniques. We have also demonstrated the utility of the approach not only in qRT-PCR assays, but high-throughput RNAseq assays as well. These assays will allow for comparison studies of C. albicans filamentation initiation in solid and liquid media.

An infrared optical pacing system for screening cardiac electrophysiology in human cardiomyocytes.

Human cardiac myocytes derived from pluripotent stem cells (hCM) have invigorated interest in genetic disease mechanisms and cardiac safety testing; however, the technology to fully assess electrophysiological function in an assay that is amenable to high throughput screening has lagged. We describe a fully contactless system using optical pacing with an infrared (IR) laser and multi-site high fidelity fluorescence imaging to assess multiple electrophysiological parameters from hCM monolayers in a standard 96-well plate. Simultaneous multi-site action potentials (FluoVolt) or Ca2+ transients (Fluo4-AM) were measured, from which high resolution maps of conduction velocity and action potential duration (APD) were obtained in a single well. Energy thresholds for optical pacing were determined for cell plating density, laser spot size, pulse width, and wavelength and found to be within ranges reported previously for reliable pacing. Action potentials measured using FluoVolt and a microelectrode exhibited the same morphology and rate of depolarization. Importantly, we show that this can be achieved accurately with minimal damage to hCM due to optical pacing or fluorescence excitation. Finally, using this assay we demonstrate that hCM exhibit reproducible changes in repolarization and impulse conduction velocity for Flecainide and Quinidine, two well described reference compounds. In conclusion, we demonstrate a high fidelity electrophysiological screening assay that incorporates optical pacing with IR light to control beating rate of hCM monolayers.

Abstract 1279: Sigma-2 receptor-mediated cell death is altered by cell density in human SK-N-SH neuroblastoma 2-D and 3-D cultures

Abstract Sigma-2 receptors are highly expressed in tumor cell lines compared to normal cells and are more highly upregulated in proliferative than in quiescent cells. Sigma-2 receptor agonists induce apoptotic cell death. Here, we investigate the effect of cell confluence at the time of harvest, cell plating density, and 3-D cell aggregation on the cytotoxic potency of the irreversible sigma-2 receptor partial agonist CM572. Sensitivity to sigma-2 receptor agonists has in practice appeared to vary with cell confluency, an effect likely due to proliferative state. To examine 2-D SK-N-SH cell culture sensitivity to CM572, we varied two parameters: 1) cell confluence at the time of harvest (cells harvested upon reaching 60% confluency or cells harvested after remaining at 100% confluency for 3 days) and 2) cell plating density (low: 7,000, medium: 15,000, or high: 30,000 cells/well). Cells were treated with CM572 24 h after plating. Using MTT assay, CM572 EC50 values for cells harvested at 60% confluence were similar regardless of cell plating densities (μM): 4.92 ± 2.24, 7.6 ± 1.68, and 6.06 ± 1.30 for cells plated at low, medium, and high densities, respectively. In contrast, CM572 EC50 values for cells harvested at 100% confluence for 3 days were significantly dependent on plating density (μM): 17.62 ±7.62, 35.33 ± 35.3, and &amp;gt;50 for cells plated at low, medium, and high densities, respectively. [3H]DTG Scatchard analysis of cells harvested at 60% confluence vs. 100% confluence for 3 days revealed no significant difference in sigma-2 receptor number: Bmax = 212.3 ± 34.22 and 173.0 ± 4.31 fmol bound/mg protein, respectively. The effect of CM572 on cell aggregation and cytotoxicity was additionally studied in 3-D SK-N-SH cultures. Cells were seeded into rod-shaped agarose wells, to which they could not adhere but only self-aggregate over a period of 24 h. Subsequent treatment with CM572 over 24-72 h significantly reduced 3-D aggregation, which was defined as an increase in the length of the 3-D culture rod after aggregation. However, treatment of these 3-D cultures with up to 70 μM CM572 for 24-72 h resulted in cytotoxicity levels of less than 10%, as measured by the LDH assay. This indicates a significant decrease in CM572 potency compared to the 2-D EC50. Therefore, sensitivity to CM572 decreases both after cells are confluent for 3 days at 100% in 2-D culture and in cells that form aggregates in 3-D culture. These results show that sensitivity of SK-N-SH cell cultures to CM572 is dependent on cell density, suggesting that CM572 may cause cell death in a cell-cycle dependent manner. This may be related to SK-N-SH cells transitioning from a proliferative to quiescent state when they are confluent in 2-D culture or form aggregates in 3-D culture. Taken together, these results suggest that cytotoxic sigma-2 receptor ligands such as CM572 may be more potent in proliferating cancer cells and/or cells leaving tumor masses in the process of metastasis. Citation Format: Cheri Z. Liu, Vira Behnam, Wayne D. Bowen. Sigma-2 receptor-mediated cell death is altered by cell density in human SK-N-SH neuroblastoma 2-D and 3-D cultures. [abstract]. In: Proceedings of the 107th Annual Meeting of the American Association for Cancer Research; 2016 Apr 16-20; New Orleans, LA. Philadelphia (PA): AACR; Cancer Res 2016;76(14 Suppl):Abstract nr 1279.

Abstract 605: Building better cell models for screening oncology compounds

Abstract The NCI60 screen is a valuable compound screening service offered to researchers for 20+ years. The screen allows the submission of small molecules, biologics and natural products for testing in the NCI60 cell line panel (60 cell lines covering 9 major tumor types). Sophisticated tools such as COMPARE allow stratification of compounds based on pattern of cell line response and these tools elucidated several compounds with differential specificity for a disease type (e.g. breast cancer over melanoma). Since inception the NCI60 screen has been performed in 96-well plates on monolayer cultures of cells. SulfoRhodamine B was used to measure cell viability after a 48h exposure to the compounds at either a single concentration or 5 point concentration response assay. However, recent work has suggested that cells in 3D culture may respond differently to compounds than in 2D. 3D culture systems produce tumor cell spheroids that exhibit features seen in vivo including greater cell-cell contact, and gradients of nutrients and oxygen between the periphery and the center of the spheroid. We sought to optimize the NCI60 cells for use in a 3D spheroid model that would be suitable for screening compounds. By varying NCI60 cell plating density and incubation times, we optimized the formation of spheroids of a given diameter (500um) in Ultra Low Attachment (ULA) plates. Spheroids were imaged using a high content imaging plate reader and classified into 4 categories based on their apparent morphologies. Comparisons were made in drug sensitivity between 2D and 3D model systems using the NCI60 and cells derived from PDX samples. Data on the optimal cell densities of the NCI60 lines used for spheroid formation as well as concentration response effects of select agents compared in 2D and 3D models are presented. These data will allow others to rapidly utilize these 3D models to determine the differential drug sensitivity of select cell types. Funded by NCI Contract No. HHSN261200800001E. Citation Format: David M. Evans, Michael Selby, Rene Delosh, Julie Laudeman, Chad Ogle, Russell Reinhart, Thomas Silvers, Ralph E. Parchment, Beverly Teicher. Building better cell models for screening oncology compounds. [abstract]. In: Proceedings of the 107th Annual Meeting of the American Association for Cancer Research; 2016 Apr 16-20; New Orleans, LA. Philadelphia (PA): AACR; Cancer Res 2016;76(14 Suppl):Abstract nr 605.

HTRF-based high-throughput PGE2 release prohibition model and application in discovering traditional Chinese medicine active ingredients

Prostaglandin (PG) E2 is an active substance in pathological and physiological mechanisms, such as inflammation and pain. The in vitro high-throughput assay for screening the inhibitors of reducing PEG2 production is a useful method for finding out antiphlogistic and analgesic candidates. The assay was based on LPS-induced PGE2 production model using a homogeneous time-resolved fluorescence(HTRF) PGE2 testing kit combined with liquid handling automation and detection instruments. The critical steps, including the cell density optimization and IC50 values determination of a positive compound, were taken to verify the stability and sensibility of the assay. Low intra-plate, inter-plate and day-to-day variability were observed in this 384-well, high-throughput format assay. Totally 5 121 samples were selected from the company's traditional Chinese medicine(TCM) material base library and used to screen PGE2 inhibitors. In this model, the cell plating density was 2 000 cells for each well; the average IC₅₀ value for positive compounds was (7.3±0.1) μmol; the Z' factor for test plates was more than 0.5 and averaged at 0.7. Among the 5 121 samples, 228 components exhibited a PGE2 production prohibition rate of more than 50%, and 23 components exhibited more than 80%. This model reached the expected standards in data stability and accuracy, indicating the reliability and authenticity of the screening results. The automated screening system was introduced to make the model fast and efficient, with a average daily screening amount exceeding 14 000 data points and provide a new model for discovering new anti-inflammatory and analgesic drug and quickly screening effective constituents of TCM in the early stage.

A simple method for differentiation of H9 cells into neuroectoderm.

Human embryonic stem cells (ESCs) can form neuroectoderm (NE), providing a platform for in vitro dissection of NE formation. However, human ESCs can differentiate into all three germ layers. It thus is crucial to develop efficient methods for differentiation of human ESCs into NE cells. Both plating cell density and localized cell density (LCD) affect NE differentiation. Here, we developed a cell cluster-based NE differentiation method, in which both plating cell density and LCD are under control. Using our new method, high plating cell densities promote expression of PAX6, a NE marker protein. Two SMAD signaling blockers, SB431542 and NOGGIN, downregulate OCT4 and upregulate PAX6, while does not affect mRNA expression of GATA2 after 5 d of differentiation. Moreover, IB analysis showed a time-dependent upregulation of PAX6 and beta-III-tubulin together with a downregulation of OCT4 during the neural differentiation. Coexpression of both TH and beta-III-tubulin in the H9-derived cells was also detected, proving the NE cells have an ability to differentiate into one of the specific neurons. Together, we established a simple method for generating NE cells from H9 cells, which might contribute to develop high efficient method for neural differentiation.