Caudal Screw Research Articles

Are Variable Screw Angle Change and Screw-to-Vertebral Body Ratio Associated With Radiographic Subsidence Following Anterior Cervical Discectomy and Fusion?

Retrospective Cohort. This study aims to assess the easily measurable radiographic landmarks of screw-to-vertebral body ratio and changes in screw angle to identify if they are associated with early subsidence following an Anterior cervical discectomy and fusion (ACDF). A retrospective cohort study was conducted on patients undergoing 1-3 level ACDF with allograft or PEEK cages. Preoperative, immediate postoperative, and 6-month postoperative radiographs were analyzed to measure intradiscal height (or distance between 2 vertebral bodies) as an anterior vertebral distance (AVD), middle (MVD), and posterior (PVD), screw angle, screw-to-vertebral body length ratio, and interscrew distance. Multivariate stepwise regression analyses were performed. 92 patients were included (42 single-level, 32 two-level, and 18 3-level ACDFs). In single-level ACDFs, a decrease in the caudal screw angle was associated with a decrease in AVD (=.001) and MVD (P = .03). A decrease in the PVD was associated with a decrease in segmental lordosis (P < .001). For two-level ACDFs, a higher caudal screw-to-body ratio was associated with a lower MVD (P = .01). Six months following an ACDF for degenerative pathology, a decrease in the caudal screw angle was associated with an increase in radiographic subsidence at the antero-medial aspect of the disc space albeit largely subclinical. This suggests that the caudal screw angle change may serve as a reliable radiographic marker for early radiographic subsidence. Furthermore, a greater screw-to-vertebral body ratio may be protective against radiographic subsidence in two-level ACDF procedures.

Increasing the angle between caudal screw and the transverse plane may aggravate the risk of femoral head necrosis by deteriorating the fixation stability in patients with femoral neck fracture

Necrosis of the femoral head is the main complication in femoral neck fracture patients with triangle cannulated screw fixation. Instant postoperative fixation instability is a main reason for the higher risk of femoral head necrosis. Biomechanical studies have shown that cross screw fixation can effectively optimize fixation stability in patients with proximal humerus fractures and pedicle screw fixation, but whether this method can also effectively optimize the fixation stability of femoral neck fractures and reduce the corresponding risk of femoral head necrosis has yet to be identified. In this study, a retrospective review of imaging data in femoral neck fracture patients was performed. The cross angle between the femoral neck and the caudal cannulated screw was reported; if the angle between the screw and the transverse plane increased, it was recorded as positive; otherwise, it was recorded as negative. Angle values and their corresponding absolute values were compared in patients with and without femoral head necrosis. Regression analysis identified potential risk factors for femoral head necrosis. Moreover, the biomechanical effect of the screw–femoral neck angle on fixation stability was also verified by numerical mechanical simulations. Clinical review presented significantly larger positive angle values in patients with femoral head necrosis, which was also proven to be an independent risk factor for this complication. Moreover, fixation stability progressively deteriorated with increasing angle between the caudal screw and the transverse plane. Therefore, increasing the angle between the caudal screw and the transverse plane may aggravate the risk of femoral head necrosis by deteriorating the fixation stability in patients with femoral neck fracture.

Incidence and Risk Factors of the Caudal Screw Loosening after Pelvic Fixation for Adult Spinal Deformity: A Systematic Review and Meta-analysis.

The purpose of this study was to assess the factors affecting caudal screw loosening after spinopelvic fixation for adult patients with spinal deformity. This meta-analysis calculated the weighted mean difference (WMD) and odds ratio (OR) using Review Manager ver. 5.3 (RevMan; Cochrane, London, UK). The loosening group was older than the control group (WMD, 2.17; 95% confidence interval [CI], 0.48-3.87; p=0.01). The S2 alar-iliac (S2AI) could prevent the caudal screw from loosening (OR, 0.43; 95% CI, 0.20-0.94; p=0.03). However, gender distribution (p=0.36), the number of fusion segments (p=0.24), rod breakage (p=0.97), T-score (p=0.10), and proximal junctional kyphosis (p=0.75) demonstrated no difference. Preoperatively, only pelvic incidence (PI) in the loosening group was higher (WMD, 5.08; 95% CI, 2.71-7.45; p<0.01), while thoracic kyphosis (p=0.09), lumbar lordosis (LL) (p=0.69), pelvic tilt (PT) (p=0.31), pelvic incidence minus lumbar lordosis (PI-LL) (p=0.35), sagittal vertical axis (SVA) (p=0.27), and T1 pelvic angle (TPA) demonstrated no difference (p=0.10). PI-LL (WMD, 6.05; 95% CI, 0.96-11.14; p=0.02), PT (WMD, 4.12; 95% CI, 0.99-7.26; p=0.01), TPA (WMD, 4.72; 95% CI, 2.35-7.09; p<0.01), and SVA (WMD, 13.35; 95% CI, 2.83-3.87; p=0.001) were higher in the screw loosening group immediately postoperatively. However, TK (p=0.24) and LL (p=0.44) demonstrated no difference. TPA (WMD, 8.38; 95% CI, 3.30-13.47; p<0.01), PT (WMD, 6.01; 95% CI, 1.47-10.55; p=0.01), and SVA (WMD, 23.13; 95% CI, 12.06-34.21; p<0.01) were higher in the screw loosening group at the final follow-up. However, PI-LL (p=0.17) demonstrated no significant difference. Elderly individuals were more susceptible to the caudal screw loosening, and the S2AI screw might better reduce the caudal screw loosening rate than the iliac screws. The lumbar lordosis and sagittal alignment should be reconstructed properly to prevent the caudal screw from loosening. Measures to block sagittal alignment deterioration could also prevent the caudal screw from loosening.

Multiple-Rod Constructs in Adult Spinal Deformity Surgery: A Systematic Review and Meta-Analysis.

The purpose of this research was to compare the therapeutic efficacy of multiple-rod constructs vis-a-vis 2-rod constructs in the treatment of adult spinal deformity. A systematic review and meta-analysis were performed to determine whether the multiple-rod construct outperformed the 2-rod construct. We initially retrieved 357 papers, but only 12 were chosen for further meta-analysis. The rod breakage rates in the multiple-rod and the 2-rod groups were 10.66% and 29.87%, respectively. The multiple-rod construct inhibited rod breakage (odds ratio [OR], 0.28; 95% confidence interval [CI], 0.19-0.41; p<0.001), pseudarthrosis (OR, 0.30; 95% CI, 0.18-0.50; p<0.001) and rod fracture at the osteotomy site (OR, 0.34; 95% CI, 0.13-0.89; p=0.03). Furthermore, the multiple-rod construct reduces the risk of revision surgery (OR, 0.38; 95% CI, 0.20-0.73; p=0.04) as well as the revision risk of pseudarthrosis/rod fracture in the multiple- rod group (OR, 0.31; 95% CI, 0.18-0.52; p<0.001), but increases the risk of caudal screw loosening (OR, 4.99; 95% CI, 1.87-13.30; p=0.001). There was no statistically significant difference in proximal junctional kyphosis (PJK) parameters (p=0.85), cerebrospinal fluid leakage (p=0.09), wound infection (p =0.71), age at surgery (p=0.62), gender distribution (p=0.93), body mass index (p =0.86), smoking status (p=0.05), hospital stay (p=0.09), osteoporosis (p=0.95), CoCr rod material (p=0.15), bone morphogenetic protein-2 (p=0.58), L5/S1 interbody fusion (p=0.07), high-grade osteotomies (p=0.07), the number of fusion levels (p=0.11), operation time (p=0.30), and blood loss volume (p=0.34). Regarding radiographic parameters, only preoperative sagittal vertical axis was found to be higher (weight means difference [WMD], 25.60; 95% CI, 15.43-35.77; p<0.001) in the multiple-rod group. There was no difference in preoperative Oswestry Disability Index (ODI) (WMD, -3.32; 95% CI, -7.38 to 0.73; p=0.11), but the multiple-rod group had a lower ODI at follow-up (WMD, -7.71; 95% CI, -11.62 to -3.86; p<0.001). Multiple-rod constructs could prevent rod breakage and pseudarthrosis while also lowering the revision rate, resulting in a better clinical outcome than the 2-rod construct. Nonetheless, due consideration should be given to PJK and screw loosening in multiple-rod constructs, possibly due to the increased stiffness caused by the multiple-rod structure.

Case report: Three-dimensionally printed patient-specific acetabular cage for revision surgery of aseptic loosening in a dog with micro total hip replacement

A 2-year-old castrated male Pomeranian dog was presented for regular follow-up after micro total hip replacement (mTHR) 16 months prior to presentation. Clinically, the dog did not show any noticeable lameness of the left hindlimb, except for external rotation during walking. However, radiographic findings, namely rotation and medialization of the acetabular cup with a periprosthetic lucent line and bone formation medial to the acetabulum, were interpreted as aseptic loosening of the acetabular component. Because the dog was incompatible with the conventional THR revision method owing to severe bone defects in the acetabulum, a patient-specific titanium acetabular cage prosthesis with biflanges and four cranial and one caudal screw hole was designed for revision surgery. A custom-made acetabular cage was prepared, and it had a 12-mm polyethylene cup fixed with polymethylmethacrylate bone cement and positioned in the acetabulum. After the custom-made acetabular cage was anchored to the pelvic bone with the five cortical screws, reduction of the prostheses was achieved smoothly. The dog showed almost normal limb function without external rotation of the left hindlimb 2 weeks postoperatively. Bone remodeling and stable implant position were noted on radiographic images 3 years after revision surgery, with no evidence of loosening. Based on the clinical outcomes, the use of a custom-made acetabular prosthesis can be an effective treatment option for revision arthroplasty in acetabula with severe bone loss and structural changes in small-breed dogs.

Deterioration of the fixation segment's stress distribution and the strength reduction of screw holding position together cause screw loosening in ALSR fixed OLIF patients with poor BMD.

The vertebral body’s Hounsfield unit (HU) value can credibly reflect patients’ bone mineral density (BMD). Given that poor bone-screw integration initially triggers screw loosening and regional differences in BMD and strength in the vertebral body exist, HU in screw holding planes should better predict screw loosening. According to the stress shielding effect, the stress distribution changes in the fixation segment with BMD reduction should be related to screw loosening, but this has not been identified. We retrospectively collected the radiographic and demographic data of 56 patients treated by single-level oblique lumbar interbody fusion (OLIF) with anterior lateral single rod (ALSR) screw fixation. BMD was identified by measuring HU values in vertebral bodies and screw holding planes. Regression analyses identified independent risk factors for cranial and caudal screw loosening separately. Meanwhile, OLIF with ALSR fixation was numerically simulated; the elastic modulus of bony structures was adjusted to simulate different grades of BMD reduction. Stress distribution changes were judged by computing stress distribution in screws, bone-screw interfaces, and cancellous bones in the fixation segment. The results showed that HU reduction in vertebral bodies and screw holding planes were independent risk factors for screw loosening. The predictive performance of screw holding plane HU is better than the mean HU of vertebral bodies. Cranial screws suffer a higher risk of screw loosening, but HU was not significantly different between cranial and caudal sides. The poor BMD led to stress concentrations on both the screw and bone-screw interfaces. Biomechanical deterioration was more severe in the cranial screws than in the caudal screws. Additionally, lower stress can also be observed in fixation segments’ cancellous bone. Therefore, a higher proportion of ALSR load transmission triggers stress concentration on the screw and bone-screw interfaces in patients with poor BMD. This, together with decreased bony strength in the screw holding position, contributes to screw loosening in osteoporotic patients biomechanically. The trajectory optimization of ALSR screws based on preoperative HU measurement and regular anti-osteoporosis therapy may effectively reduce the risk of screw loosening.

Three cases of caudal screw back out after percutaneous pedicle screw for osteoporosis vertebral fracture

Three cases of caudal screw back out after percutaneous pedicle screw for osteoporosis vertebral fracture

Key-Vertebral Screws Strategy for Main Thoracic Curve Correction in Patients With Adolescent Idiopathic Scoliosis.

The following study was a prospective radiographic and retrospective clinical data assessment of adolescent idiopathic scoliosis (AIS) patients who had undergone a key-vertebral screws strategy (KVSS) at a single institution, with a minimum of 2 years' follow-up. The aim of the study was to introduce the KVSS for the operative treatment of AIS of the main thoracic curve, and to address the role of the fulcrum-bending radiograph (FBR) in predicting the outcome of surgical management by this method. The application of multilevel pedicle screws for the main thoracic curve in AIS patients is popular in an effort to provide spinal stability, enhance fusion outcome, and provide optimal curve correction. However, with the application of pedicle screw also comes a potential risk for soft tissue and neural injury and increased health care costs. It remains unknown whether limited screw placement can provide proper curve correction without compromising patient outcome. A total of 17 consecutive patients with AIS extending to the main thoracic spine, who had undergone posterior fusion and fixation by the KVSS, a procedure in which screws are placed at important strategic points in the spine (ie, bilaterally at the upper and lower end segments of the fusion block, apical vertebra on the convex side, adjacent cephalad, and caudal screw placement on the concave side), at a single institution, with a minimum of 2 year' follow-up, were included. The assessment of preoperative standing posteroanterior and sagittal, FBR, and postoperative standing posteroanterior and sagittal plain radiographs were assessed in all patients. The flexibility of the curve as well as the fulcrum-bending correction index (FBCI) were calculated for all patients. Postoperatively, radiographs were assessed at the immediate (ie, 1 wk) and last follow-up. Clinical assessment entailed evaluation of patient demographics and the presence of any intraoperative or postoperative complications. The mean age at the time of surgery was 15.6 years. The mean follow-up was 39.8 months. The average FBR flexibility was 62.2%. The mean immediate curve correction was 71.2%, which did not differ in comparison with the last follow-up assessment (P>0.05). The mean immediate and last follow-up FBCIs were 119.3% and 112.5%, respectively (P=0.079). A significant negative correlation was found between immediate FBCI to that of the FBR curve flexibility (r=-0.706; P=0.002), which remained similar on the last follow-up (r=-0.681; P=0.003). Sagittal alignment did not significantly change from the immediate to last follow-up (P=0.163) Fusion was achieved in all patients. No instrumentation-related complications were noted. Key-vertebral screws strategy is a safe and cost-effective method for the surgical treatment of the main thoracic curve in AIS patients. Moreover, in the context of this strategy, the FBR may have some predictive utility in the correction of the main thoracic curve in AIS patients.

Fixation Strength of Caudal Pedicle Screws after Posterior Lumbar Interbody Fusion with the Modified Cortical Bone Trajectory Screw Method.

Study DesignClinical case series.PurposeIn the posterior lumbar interbody fusion (PLIF) procedure in our institute, the cephalad screw trajectory follows a mediolateral and caudocephalad directed path according to the original cortical bone trajectory (CBT) method. However, the starting point of the caudal screw is at the medial border of the pedicle on an articular surface of the superior articular process, and the trajectory takes a mediolateral path parallel to the cephalad endplate. The incidence of caudal screw loosening after PLIF with this modified CBT screw method was investigated, and significant risk factors for caudal screw loosening were evaluated.Overview of LiteratureA biomechanical study of this modified caudal screw trajectory using the finite element method reported about a 20% increase in uniaxial yield pullout load compared with the traditional trajectory. However, there has been no clinical study concerning the fixation strength of this modified caudal screw trajectory.MethodsThe subjects were 193 consecutive patients who underwent single-level PLIF with modified CBT screw fixation. Caudal screw loosening was checked in computed tomography at 6 months after surgery, and screw loosening was defined as a radiolucency of 1 mm or more at the bone-screw interface.ResultsThe incidence of caudal screw loosening after lumbosacral PLIF (46.2%) was significantly higher than that after floating PLIF (6.0%). No significant differences in sex, brand of the instruments, and diameter and length of the caudal screw were evident between patients with and without caudal screw loosening. Patients with caudal screw loosening were significantly older at the time of surgery than patients without caudal screw loosening.ConclusionsFixation strength of the caudal screw after floating PLIF with this modified CBT screw technique was sufficiently acceptable. Fixation strength after the lumbosacral procedure was not.

Tibial fractures after tibial tubercle osteotomies for patellar instability: A comparison of three osteotomy configurations

Tibial tubercle osteotomies (TTOs) are a seemingly straightforward technique; however problems with bony union, implant failure, wound infections, and fractures have been reported in the literature. A database search identified all patients who had a TTO performed for patellofemoral instability between 1 March 2000 and 30 July 2008 by a single surgeon. The TTO technique was modified twice during the study period (December 2003 and June 2007, respectively), thereby creating three similar patient cohorts. TTOs were performed in 101 knees (90 patients), in which 34 knees (29 patients) received the blunt technique (TTO-B), 32 knees (30 patients) the sloped technique (TTO-S), and 35 knees (31 patients) the greenstick technique (TTO-G). Mean age of the patients (75 females, 15 males) was 16.0years (range 12.2-20.2years). Overall, six patients had complications, namely, six tibia fractures and no nonunions, for an overall complication rate of 5.9%. In the TTO-B group, four patients had four tibia fractures for an overall bony complication rate of 11.8%. In the TTO-S group, two patients had two delayed unions which developed into tibia fractures for an overall bony complication rate of 6.2%. There were no complications (0%) in the TTO-G group. No correlation was identified between TTO screw size and complications. The caudal aspect of the osteotomy was the location of the tibia fracture in five knees and the caudal screw in 1 knee, at a mean of 11weeks postoperatively. All fractures were treated only with splint or cast immobilization and protected weight-bearing. The overall bony complication rate was 5.9% for the TTOs in this study. Utilizing the TTO-G technique with rigid two-screw, bicortical fixation the complication rate could be lowered to 0%. Avoidance of periosteal stripping, and secondary cortical devascularization at the caudal aspect of the TTO appears to optimize bony consolidation, thereby minimizing fractures. Bony complications are an infrequent problem after TTO. Greensticking the distal end of the TTO can minimize postoperative tibia fractures. Running and sports should not be permitted until complete cortical healing is documented on the lateral radiograph.

Occipitocervical Fusion Using Contoured Rods and Medial Offset Connectors: Description of a New Technique

Stabilization of the occipitocervical junction and fixation of the occiput is challenging. Rigid fixation with plates and screws has reduced dependence on external immobilization and improved fusion rates. The strength of the occipital fixation can be compromised as plates constrain the ability to place occipital screws along the midline. Bilateral contoured rods with medial offset connectors allow placement of 6 occipital screws in the thickest and strongest bone along the midline, while easily connecting to screws in the cervical spine. The purpose of this study is to review complications and fusion rates in a patient series using this new technique to stabilize the occipitocervical junction. A retrospective review was performed at 2 years of 20 patients who underwent occipitocervical fusion for instability using bilateral contoured rods with medial offset connectors. Six occipital screws were successfully placed in 17 patients. The caudal screw on one side was abandoned in 3 patients due to insufficient occipital thickness. Sixteen patients fused. Four patients died in the perioperative period secondary to polytrauma complications. There were no hardware-related complications nor failure of occipital fixation. Bilateral rods with medial offset connectors allow parasagittal placement of 6 bicortical screws in the thickest and strongest bone along the occipital midline. The use of 6 occipital screws has been shown to be biomechanically advantageous. Using this technique, 6 occipital screws were easily placed in each of 17 patients, while 5 strong points of fixation were obtained in the other 3 patients. We experienced no failure of occipital fixation, and all surviving patients went on to fusion.

Biomechanical Evaluation of Parasagittal Occipital Plating

Biomechanical evaluation of occipitocervical instrumentation techniques. Compare methods of occipital instrumentation by quantifying load sharing of occipital screws and measuring motion across instrumented occipitocervical spines. Newer occipitocervical plate/screw systems that attach to longitudinal rods have been developed to improve fixation. These devices place screws in the center of occipital bone or off-midline. Midline plates offer screw purchase in thicker bone. Off-midline systems may increase the effective moment arm for torsional and lateral bending control. Measurement of screw loads within occipital plates is useful for determining optimal plate configuration. Ten cadaveric specimens (occiput-C4) were tested in flexion/extension (FE), lateral bending (LAT), and axial rotation (ROT) over +/-3 Nm pure moment. After intact testing, 4 occipitocervical fixation constructs were tested using washer load cells to assess loading across screws used to fix the plates to the occiput. Parasagittal occipital plates were positioned either convex or concave side facing medially. Each plate was first fixed using 3 screws (rostral, middle, caudal), then with the caudal screw eliminated (simulated failure). Range of motion (ROM) and peak screw loads are reported. ROM decreased from intact to any of the 4 fusion plate configurations in FE, LAT, and ROT (P << 0.05), but not between plate configurations. Screw load significantly decreased from medially convex to medially concave configurations in LAT, but no significant changes were observed in FE or ROT. With caudal screws removed, middle screws peak loads significantly increased in FE and LAT (P < 0.05), but not ROT. Occipital screw placement off-midline improves screw loads under lateral bending forces on occipitocervical constructs, though loads for FE and ROT are unchanged. As screws pullout, the loads may be redistributed, resulting in increased screw pullout forces above. Despite the improvement in screw loads for laterally based plates during lateral bending, overall ROM across the occipitocervical junction is unchanged.

A biomechanical comparison of external skeletal fixation and plating for the stabilization of ilial osteotomies in dogs

This in vitro study compares the biomechanical properties of two methods of ilial fracture repair in dogs. Ten pelves were harvested from skeletally mature mixed breed dogs weighing 20-27 kg and bilateral oblique ilial body osteotomies were created. One hemipelvis from each dog was stabilized with a 2.7 mm plate and screws and the contralateral hemipelvis was stabilized with a five pin linear external fixator construct. Each hemipelvis was mounted at an angle of 30 degrees to an actuator platform, such that the acetabulum was centrally loaded by a steel sphere attached to the load cell of a servohydraulic materials testing machine. The construct was loaded at a constant rate of 20 mm/min. A load/displacement curve was generated for each hemipelvis by plotting the sustained load against the actuator movement. The stiffness, yield load and failure load for each hemipelvis were determined from the load/displacement curve. Bending stiffness was defined as the slope of the load/displacement curve from 100 N to yield load. The mode of failure was determined by observations made during testing and gross inspection of each specimen. The mean construct stiffness, yield load and failure load were compared between stabilization groups using a Student's paired t-test with statistical significance set at p<0.05. Nine out of 10 of the hemipelves that were stabilized by plates and screws failed catastrophically by fracture through the caudal screw holes and nine out of 10 of the hemipelves that were stabilized using an external fixator failed by fracture of the ischium in the region supported by the mounting roller, propagating through the most caudal ischial pin. There was not any significant difference (P=0.22) in bending stiffness between stabilization techniques, but yield (1467 N vs 2620 N; P=0.04) and failure (1918 N vs 2687 N; P=0.002) loads were significantly greater for hemipelves stabilized with external fixators.

Late Spontaneous Hemothorax Complicating Anterior Spinal Instrumentation in Adolescent Idiopathic Scoliosis

Case report. Describes a case report of a 16-year-old woman treated for adolescent idiopathic scoliosis (AIS) by anterior spinal fusion and instrumentation, who developed a spontaneous massive intrathoracic bleeding 10 months after surgery. Hemothorax (HT) is a known rare postoperative complication of anterior spinal scoliosis surgery. However, spontaneous HT has never been described as a late complication, in relationship to diaphragm movement over the anterior instrumentation material. Retrospective case report. A 16-year-old woman with Lenke type I AIS underwent a successful anterior spinal fusion with instrumentation. After surgery, there were no complications, however, she experienced a distressing grating sensation while breathing. Ten months after surgery, the patient developed a spontaneous HT that needed emergency surgery. Erosion of a small artery in the scar tissue around the most caudal screw of the instrumentation proved to be the cause of the late HT. Subsequent dynamic magnetic resonance imaging showed the relationship between the moving diaphragmatic muscles and the most caudal screws of instrumentation material during breathing. Sixteen months after the initial surgery, the anterior instrumentation was removed. Late spontaneous HT in patients with anterior fusion and instrumentation for AIS is a rare but life-threatening complication.