Cationic Agents Research Articles

Development of an inhalable contrast agent targeting the respiratory tract mucus layer for pulmonary ultrasonic imaging

Impaired mucociliary transport is a distinguishing sign of cystic fibrosis, but current methods of evaluation are invasive or expose young patients to ionizing radiation. Contrast-enhanced ultrasound imaging may provide a feasible alternative. We formulated a cationic microbubble ultrasound contrast agent, to optimize adhesion to the respiratory mucus layer when inhaled. Potential toxicity was evaluated in human bronchial epithelial cell (hBEC) cultures following a 24-hour exposure, compared to positive and negative control conditions. In vivo tolerability and pulmonary image enhancement feasibility were evaluated in mice, comparing oropharyngeal administration of contrast agent to saline control. When induced to flow across mucus plated on microscope slides, cationic microbubbles demonstrated greater affinity for target samples than standard microbubbles. Cationic microbubbles elicited no proinflammatory or cytotoxic response in hBECs, nor were any cross-links to the cilia observed. Unlike standard microbubbles, cationic microbubbles mixed into the mucus layer, without epithelial absorption, and were observed to move with the mucus layer by the action of mucociliary transport. When administered to mice, cationic microbubbles enhanced sonographic visualization of the trachea, and were well-tolerated with no adverse effects. This developmental work supports the safety and feasibility of a mucus-targeting contrast agent that may be useful for pulmonary ultrasound applications.

Bifunctional cationic modification of modal fabric for sustainable in textile dyeing with spent coffee grounds

In order to dye cellulose or regenerated cellulose with natural dyes, toxic metal mordants are generally employed. In response to this issue, the novel bifunctional cationic agent was pretreated to modify modal (regenerated cellulose) fabric prior to dyeing to enhance the fiber-dye affinity. The cationization reaction was carried out using a compound containing bicationic sites, N,N'-(oxybis (ethane-2,1-diyl))bis(3-chloro-2-hydroxy-N,N-dimethylpropan-1-aminium. This unique cationic agent is capable of producing nonvolatile amine and has no odor problem. The successful cationic modification was confirmed through FTIR spectroscopy and zeta potential measurement. The cationized process was optimized at a cationic and sodium hydroxide concentration of 90 and 20 g∙L‒1, respectively, with a duration of 5 h. The modified modal fabric significantly enhanced its dyeability with the extract from spent coffee grounds, resulting in deep brown colors. The cationized sample's color strength was noticeably improved. Cationized samples demonstrated better color fastness to washing than untreated samples. Crock fastness was comparable, except the light fastness at high dye concentrations was slightly lower. By utilizing cationization, it offers a promising and sustainable approach enhancing the dyeing with natural dye for green textile coloration.

Structural and Biological Studies of Bioactive Silver(I) Complexes with Coumarin Acid Derivatives.

Two new Ag(I) complexes with coumaric carboxylic acid derivatives have been synthesized. Structural studies of these noncrystalline complexes have been performed using a methodology that combines laboratory and synchrotron techniques, supported by density functional theory calculations. The arrangement of ligands around the Ag(I) cation has been refined using infrared, extended X-ray absorption fine structure, and X-ray absorption near edge structure spectroscopies. Different coordination modes of carboxylate ligands are observed for the studied compounds. Carboxylate bridges are characteristic for the Ag(I) complex with 4-oxo-4H-1-benzopyran-2-carboxylic acid (1), while a bidentate chelating motif was found for the complex with 2-oxo-2H-1-benzopyran-3-carboxylic acid (2). Additionally, the carbonyl oxygen atom of the coumarin ring coordinates to the silver cation in complex 2, while it is inactive in complex 1. Antimicrobial evaluation has been performed for both compounds. The complexes show activity against selected bacteria as well as Candida yeast. This activity is slightly lower for bacteria and the same or higher for Candida in relation to the reference substances: ciprofloxacin or fluconazole.

Blood-Brain Barrier-Penetrative Fluorescent Anticancer Agents Triggering Paraptosis and Ferroptosis for Glioblastoma Therapy.

Currently used drugs for glioblastoma (GBM) treatments are ineffective, primarily due to the significant challenges posed by strong drug resistance, poor blood-brain barrier (BBB) permeability, and the lack of tumor specificity. Here, we report two cationic fluorescent anticancer agents (TriPEX-ClO4 and TriPEX-PF6) capable of BBB penetration for efficient GBM therapy via paraptosis and ferroptosis induction. These aggregation-induced emission (AIE)-active agents specifically target mitochondria, effectively triggering ATF4/JNK/Alix-regulated paraptosis and GPX4-mediated ferroptosis. Specifically, they rapidly induce substantial mitochondria-derived vacuolation, accompanied by reactive oxygen species generation, decreased mitochondrial membrane potential, and intracellular Ca2+ overload, thereby disrupting metabolisms and inducing nonapoptotic cell death. In vivo imaging revealed that TriPEX-ClO4 and TriPEX-PF6 successfully traversed the BBB to target orthotopic glioma and initiated effective synergistic therapy postintravenous injection. Our AIE drugs emerged as the pioneering paraptosis inducers against drug-resistant GBM, significantly extending survival up to 40 days compared to Temozolomide (20 days) in drug-resistant GBM-bearing mice. These compelling results open up new venues for the development of fluorescent anticancer drugs and innovative treatments for brain diseases.

Enhanced densification of screen-printed GDC interlayers for solid oxide fuel cells using nitrate-based precursor in various chelating agents as pore-filling solution

The Gd-doped CeO2 (GDC) diffusion barrier between the zirconia-based electrolyte and the LSCF-based cathode in a solid-oxide fuel cell (SOFC) is essential for preventing the formation of Sc2ZrO3 as a secondary phase. However, the reaction between ceria and zirconia at high temperatures (>1300 °C) impedes the formation of a highly dense GDC layer. Herein, we present a cost-effective approach for fabricating a highly dense GDC diffusion barrier layer at lower sintering temperatures by filling the pores of the GDC skeleton using a gelatin or polyvinylpyrrolidone (PVP) solution as a chelating agent for GDC cations. We investigated the interaction between the cations and the chelating agent molecules and its effect on the diffusion barrier. In addition, the flow behavior of the pore-filling solution was evaluated to determine its penetrability. The proposed method yielded a pore-filled GDC (PF-GDC) interlayer with enhanced density at 1000 °C, a remarkable 250 °C below the conventional sintering temperature for a porous GDC interlayer. The effectiveness of the PF-GDC was investigated by analyzing the performance of electrolyte-supported cells (ESCs) and anode-supported cells (ASCs). On ASCs, the observed peak power density at 800 °C was enhanced 1.5-fold, from 1.91 W⋅cm−2 (porous GDC sintered at 1250 °C) to 2.61 W⋅cm−2 (PF-GDC sintered at 1200 °C). These findings highlight the potential for pore-filling methods to improve the performance of SOFCs.

Effects of Secondary Amine and Molecular Weight on the Biological Activities of Cationic Amphipathic Antimicrobial Macromolecules.

Cationic amphipathic antimicrobial agents inspired by antimicrobial peptides (AMPs) have shown potential in combating multidrug-resistant bacteria because of minimal resistance development. Here, this study focuses on the development of novel cationic amphipathic macromolecules in the form of dendrons and polymers with different molecular weights that employ secondary amine piperidine derivative as the cationic moiety. Generally, secondary amine compounds, especially at low molecular weights, have stronger bacteriostatic, bactericidal, and inner membrane disruption abilities than those of their primary amine counterparts. Low molecular weight D2 dendrons with two cationic centers and one hydrophobic dodecyl chain produce outstanding synergistic activity with the antibiotic rifampicin against Escherichia coli, where one-eighth of the standalone dose of D2 dendrons could reduce the concentration of rifampicin required by up to 4000-fold. The low molecular weight compounds are also less toxic and therefore have higher therapeutic index values compared to compounds with larger molecular weights. This study thus reveals key information that may inform the design of future synthetic AMPs and mimics, specifically, the design of low-molecular-weight compounds with secondary amine as the cationic center to achieve high antimicrobial potency and biocompatibility.

The role of carboxyl and cationic groups in low-level cationised cellulose fibres investigated by zeta potential and sorption studies

The anionic nature of both cellulose fibres and reactive dyes prevents substantial exhaustion of dye from the dyebath, which is at neutral pH before alkali is added to initiate dye fixation. Conventionally, salt is added to minimize the electrostatic repulsions that interfere with dye sorption, but that increases salt loads in effluents. An alternative is to affix cationic agents on the cellulose to overcome the inherent anionic charge, but that has generally been observed to result in uneven dye sorption. The focus of investigations in this work is to examine the influence of the ratio of charges on cellulose (of affixed cationic charges to inherent anionic charges) on the extents and evenness of dye sorption. The cationisation agent 3-chloro-2-hydroxypropyl-N,N,N-trimethylammonium chloride (CHPTAC) was grafted on loose viscose fibres to yield 12 to 185 mmol kg−1 cationic group content on the fibre that exhibited an inherent carboxyl group content of 68 mmol kg−1. Three different dyes (of varying molecular sizes and anionic group content) were employed for examination of sorption profiles. The results from both zeta potential measurements and dye sorption profiles showed evidence of limited dye uptake until the cationic group content in fibres exceeded that of the inherent carboxyl groups. Thereafter, an uptick in dye sorption was observed, with dye sorption levels increasing with rise in degree of cationisation. There were differences between the dyes in their degrees of sorption, which appear correlated with their molecular sizes.

Membrane-Active Antibiotics Affect Domains in Bacterial Membranes as the First Step of Their Activity.

The need to combat antimicrobial resistance is becoming more and more pressing. Here we investigate the working mechanism of a small cationic agent, N-alkylamide 3d, by conventional and high-speed atomic force microscopy. We show that N-alkylamide 3d interacts with the membrane of Staphylococcus aureus, where it changes the organization and dynamics of lipid domains. After this initial step, supramolecular structures of the antimicrobial agent attach on top of the affected membrane gradually, covering it entirely. These results demonstrate that lateral domains in the bacterial membranes might be affected by small antimicrobial agents more often than anticipated. At the same time, we show a new dual-step activity of N-alkylamide 3d that not only destroys the lateral membrane organization but also effectively covers the whole membrane with aggregates. This final step could render the membrane inaccessible from the outside and possibly prevent signaling and waste disposal of living bacteria.

A scalable and universal strategy for constructing long-term antibacterial coatings with lubricant property on medical catheters

Medical catheters might cause a high morbidity of catheter-associated urinary tract infections (CAUTIs) because of the bacterial adhesion onto the surface. In addition, the inherent hydrophobicity of catheter materials exacerbates mechanical friction, leading to tissue damage. Therefore, coatings with integrated antibacterial and lubricative properties are appealing approaches to mitigate these challenges. In this study, a kind of polyurethane (PU)-based coatings were developed and prepared on medical catheters, which were modified with a cationic antibacterial agent, quaternized ammonium-modified methyldiethanolamines (QMDEAs). Due to the reaction among castor oil tertiary alcohols, isocyanates and QMDEAs, a polymer cross-linked network was fabricated, in which a hydrophilic polymer, polyvinylpyrrolidone (PVP), was added to form a semi-interpenetrating network. The structures of the coatings were regulated by adjusting the lengths of alkyl chain of QMDEAs, concentrations of pre-coated solutions, ratios of QMDEA:isocyanate, and parameters of preparation process. Among the coatings we prepared, PU-C10–46 possessed the optimized performances, which reduced the dynamic friction coefficient by 91.38 % and had the antibacterial efficiency of 99.9 % with good biocompatibility. The in vivo anti-infective properties of PU-C10–46 were also demonstrated by an infected animal model. Furthermore, PU-C10–46 was produced in an industrial equipment, and the large-scaled industrial products also had the same performances. This work could provide a promising strategy to deal with the challenges of medical catheter-associated infection.

Surface treatment of artificial implants with hybrid nanolayers: results of antibacterial tests, leachates and scanning electron microscope analysis.

The aim of this study was to evaluate the antibacterial efficacy of surface-treated hernia implants modified by a hybrid nanolayer with incorporated Ag, Cu, and Zn cations using the sol-gel method. The materials (polypropylene, polyester, and polyvinylidene difluoride) were activated by vacuum plasma treatment or UV C radiation, then modified and tested for bacterial strains of Escherichia coli (gram-negative) and Staphylococcus aureus (gram-positive). The AATCC 100 (2019) method for quantitative and the ISO 20645 agar plate propagation method for qualitative evaluation of microbiological efficacy were used. The gradual release of incorporated ions was monitored over time in simulated body fluids (blood plasma, peritoneal fluid) and physiological saline using an inductively coupled plasma mass spectrometer. The thickness and the homogeneity of the layers were measured for individual random samples with scanning electron microscope analysis (SEMA) and evaluated with an elemental analysis. Qualitative and quantitative microbiological tests clearly show the great suitability of vacuum plasma and UV C with sol AD30 (dilution 1:1) surface treatment of the implants. The absolute concentration of Ag, Cu, and Zn cations in leachates was very low. SEMA showed a high degree of homogeneity of the layer and only very rare nanocracks by all tested materials appear after mechanical stress. This study confirms that surface treatment of meshes using the sol-gel method significantly increases the antibacterial properties. The nanolayers are sufficiently mechanically resistant and stable and pose no threat to health.

The impact of heparin and direct thrombin inhibitors on cell-penetrating polymer siRNA transfection.

Gene therapy using siRNA has become a promising strategy to achieve targeted gene knockdown for treatment of cardiovascular pathologies. However, efficient siRNA transfection often relies on cationic delivery vectors such as synthetic cell-penetrating polymers which are susceptible to interference by negatively charged molecules. Anticoagulants such as heparin, which is negatively charged and widely used in cardiovascular applications, may pose a significant barrier to effective siRNA delivery. We therefore conducted in vitro studies utilizing human smooth muscle and endothelial cells transfected with glyceraldehyde-3-phosphate dehydrogenase (GAPDH) and β2-microglobulin (B2M) siRNA in the presence of heparin, argatroban, and bivalirudin in order to determine which anticoagulant therapy is most compatible for siRNA delivery. We observed that while heparin, at clinical doses, decreases the efficiency of siRNA targeted mRNA knockdown, mRNA knockdown is not inhibited in the presence of either argatroban or bivalirudin. Our data suggests that heparin should be avoided during siRNA therapy with cationic transfection agents, and argatroban and bivalirudin should be used in its stead.

Fatty acid-derived ionic liquids as soft and sustainable antimicrobial agents

In this study, two sustainability goals are addressed: 1) developing new soft antimicrobial agents (to control antimicrobial resistance) and 2) using natural bio-derived components for this purpose. Fatty acids of bio-renewable origin (stearin, palm kernel and coconut oils) were found to be excellent starting materials for obtaining ester-functionalized ionic liquids (ILs) and mixtures. A series of soft antimicrobial agents based on imidazolium, pyridinium and cholinium ILs with long alkyl ester chains were synthesized, and their properties were examined. The length of the alkyl chain had a notable effect on the physicochemical and biological properties of the synthesized materials. The introduction of a butyl linker and an ester bond lowered the melting point, increased the antimicrobial effectiveness and reduced the cytotoxicity compared to those of non-functionalized ILs with the same hydrocarbon chain. ILs and mixtures with medium chain lengths (C12, C13 and C15) were recognized as promising substitutes for demanding cationic antimicrobial agents. The presence of an ester bond connecting the polar head and hydrophobic tail can promote the breakdown of amphiphilic molecules into less toxic initial compounds. These findings make an important contribution to the development of new, effective amphiphiles with broad-spectrum antimicrobial activity and lower environmental impact.

Cationization agent affects the stability of secondary ions in MeV-SIMS

The work presents studies of the cationization agent effect on the ionization efficiency, and on the stability of secondary molecules, which are desorbed from the surface as a result of bombardment by MeV primary ions. Different organic molecule standards were mixed with various trifluoroacetate (TFA) salts, namely AgTFA, LiTFA, NaTFA and KTFA, with Ag, Li, Na and K being common cationization agents of secondary ions besides hydrogen. Results show modest differences in ionization efficiency, and significant variation of secondary ions’ stability when different cationization agents are attached to the molecule. For all reference samples, lithium provided the most stable secondary ions with almost none detected fragmentations after the desorption, while secondary ions with attached potassium were measured as much less stable, and the ratio between neutrals (fragments) and normal positive ions is estimated to be more than 0.2. However, even potassium – ionized molecules were recognized as more stable than protonated molecules.

Unraveling Conductive Filament Formation in High Performance Halide Perovskite Memristor

AbstractHalide perovskites (HPs) are promising materials for memristor devices because of their unique characteristics. In this study, nonvolatile resistive switching memory devices based on thick MAPbI3 perovskite (800 nm) films with structure FTO/MAPbI3/polymethyl methacrylate (PMMA)/Ag are presented. Reproducible and reliable bipolar switching characteristics are demonstrated with an ultra‐low operating voltage (−0.1 V), high ON/OFF ratio (106), endurance (>2 × 103 times) and a record retention time (>105 s). The I–V curve of the first cycle exhibits self‐formed conductive filaments. These are attributed to the presence of metallic Pb resulting from an excess of PbI2 in the perovskite film. The subsequent activation process involves the formation of conductive filaments, consisting of either iodide vacancies or migrated charged metals. Numerical simulations are then carried out to understand the nature of these conductive filaments and the role of the internal electric field in the migration of iodide ions, iodide vacancies, and Ag cations. Finally, an exhaustive model is proposed that explains the set and reset processes governing the first voltage cycle and the steady state, at different voltage ranges. In summary, this work offers a novel and thorough perspective of the complete resistive switching (RS) behavior in a MAPbI3/buffer/Ag memristor, supported by numerical simulations.

Controlling the growth of uncapped silver nanoparticles on poly methacrylic acid nanospheres: The effect of polymer’s free surface on the antimicrobial properties

In this study, the control over the growth of uncapped silver nanoparticles on the surface of poly methacrylic acid nanospheres is presented. The pH of the growth medium and the size of the polymer nanospheres were studied as parameters in relation to the antimicrobial activity of the resulting structures against Escherichia coli and Staphylococcus aureus. Adjustment of the growth medium pH has a direct effect on the number of silver nanoparticles grown on the surface of the nanospheres, while the size of the nanospheres affects the resulting silver nanoparticle size distribution. The minimum bactericidal concentration was determined to 8 and 32 μg/mL against E. coli and S. aureus respectively, whereas the antimicrobial efficiency of the resulting nanospheres was enhanced in structures with increased free surface. Hence, the contribution of the as synthesized structures to the antimicrobial activity is attributed to the polymer’s ability to form stable suspensions in the aqueous bacterial growth medium, thus promoting the dissolution of silver nanoparticles to Ag cations with antimicrobial activity.

Enzyme activity test paper with high wet strength and anion adsorption properties fabricated from whole cationized softwood chemical fiber

Paper-based test film material is widely used in a variety of test instruments for different applications. The enzyme activity test paper sheet is one of the most popularly used test papers. Here we present a novel fabrication of paper-based enzyme activity test paper without cationic resin added in. The chemical pulping fibers were first beaten to different degrees (from 14.6 to 41.5°SR) with a PFI beater. After that, the fibers were modified with a cationic agent (3-chloro-2-hydroxypropyl trimethyl ammonium chloride) under the system of alkali and water solution. Finally, the test papers were made with the modified fiber by a regular paper former in lab. The results showed that beating is beneficial for the improvement of the cationization reaction which is indicated by the Zeta potential, FTIR and EDS. The main mechanisms involved are the destruction of crystalline zone, increase of free hydroxyl group and defibrillation. This hypothesis was supported by the SEM, XRD and fiber analyzer. Beating under the optimized condition, the wet strength and liquid absorbability of test paper can meet the application requirement, and the test results of enzyme activity are quite close to those of commercial test papers.

SUSTAINABLE DYEING OF MODIFIED COTTON FABRIC WITH REMAZOL DYES IN THE ABSENCE OF SALT AND ALKALI

This research work investigates the chemical modification of cotton cellulose with a cationizing agent (CHPTAC, 3-chloro-2-hydroxylpropyl trimethyl ammonium chloride), which resulted in the enhanced dye uptake and increased color strength (K/S) on the dyed cotton fabric in the absence costly auxiliaries, such as sodium chloride and sodium hydroxide. The modified and unmodified cotton fabric samples were dyed using the exhaust dyeing method on a high-temperature dyeing machine with several reactive dyes of the Remazol class in different shade depths. The dyed samples were washed, dried and tested for K/S and colorfastness properties (washing, rubbing, and light), using standard test protocols. The results revealed that the color strength and the colorfastness properties of the modified dyed cotton fabric were significantly better than those of unmodified cotton. Thus, this study attempted a sustainable approach in cotton dyeing without using salt and alkali.

FABRICATION OF HIGH STRENGTH PAPER FROM DIFFERENT TYPES OF PHOSPHORYLATED FIBERS USING HOT PRESSING AND FORMING AGENTS

Phosphorylated fibers offer a broad range of applications, particularly in thermal insulation, notably with wood fibers, provided they exhibit improved mechanical characteristics. Despite encountering challenges in applying traditional papermaking methods, the creation of paper or board sheets with phosphorylated pulp fibers remains a challenge. Findings suggest that phosphorylation-modified fibers show increased roughness. Moreover, in comparison with unbeaten kraft sheets (KF) and thermomechanical pulp sheets (TMP), those made from phosphorylated kraft fibers (PKF), using a cationic coagulant and a flocculant, demonstrate significant enhancements in burst index, break index, and tensile energy absorption by 2.12 times, 1.7 times, and 2.77 times, respectively. Similarly, phosphorylated TMP sheets, prepared with a dual polymeric system (coagulant/flocculant), exhibit improvements of 1.42 times, 1.33 times, and 1.82 times, respectively, in these properties. The study emphasizes the ameliorating effect of cationic polymeric agents on the charge impact of phosphorylated fibers on overall sheet quality, while also highlighting the substantial influence of hot-pressing lignin-containing paper on all determined physical properties.

Effective Removal of Ibuprofen from Aqueous Solution Using Cationic Surface-Active Agents in Dissolved Air-Flotation Process

This research paper focuses on the removal of the nonsteroidal anti-inflammatory drug, ibuprofen, from an aqueous solution using a dissolved air flotation process. The comparison of different types of cationic surface-active agents such as cetyltrimethyl ammonium bromide (CTAB), tetrabutyl ammonium bromide (TBAB), and octyltrimethyl ammonium bromide (OTAB) have been employed to scrutinize the effective removal of the ecotoxic pharmaceutically active compound. The work included the influencing parameters such as pressure, contact time, surfactant dosage, pH, flow rate, and initial concentration owing to the best-optimized conditions. The maximum removal rate of 96.09% was achieved at 15 min for CTAB, TBAB had 62.36% at 45 min, and 89.6% was obtained for OTAB at 30 min, with 50 mg L−1 as the initial concentration and pH = 4. The removal rate was better with the optimized dosage of CTAB at 0.6 g, TBAB at 1.2 g, and OTAB at 1.0 g. It was observed that the geometric shape of the surface-active agents had greater impacts on the contaminants’ efficiency. CTAB and OTAB were combined to find out the best possible removal rate of contaminants. The synergistic effect augments surfactant-based occurrence to be better in forming a good foaming effect and tends to have a lower critical micelle concentration (CMC). From the evaluation of kinetic models, pseudo-second-order flotation kinetics fitted the experimental data best. Furthermore, the formed metabolites that had been identified using gas chromatography-mass spectrometry were found to be less toxic than the parenting compounds.

Elastic and Self-Healing Copolymer Coatings with Antimicrobial Function.

The revolutionary self-healing function for long-term and safe service processes has inspired researchers to implement them in various fields, including in the application of antimicrobial protective coatings. Despite the great advances that have been made in the field of fabricating self-healing and antimicrobial polymers, their poor transparency and the trade-off between the mechanical and self-healing properties limit the utility of the materials as transparent antimicrobial protective coatings for wearable optical and display devices. Considering the compatibility in the blending process, our group proposed a self-healing, self-cross-linkable poly{(n-butyl acrylate)-co-[N-(hydroxymethyl)acrylamide]} copolymer (AP)-based protective coating combined with two types of commercial cationic antimicrobial agents (i.e., dimethyl octadecyl (3-trimethoxysilylpropyl) ammonium chloride (DTSACL) and chlorhexidine gluconate (CHG)), leading to the fabrication of a multifunctional modified compound film of (AP/b%CHG)-grafted-a%DTSACL. The first highlight of this research is that the reactivity of the hydroxyl group in the N-(hydroxymethyl)acrylamide of the copolymer side chains under thermal conditions facilitates the "grafting to" process with the trimethoxysilane groups of DTSACL to form AP-grafted-DTSACL, yielding favorable thermal stability, improvement in hydrophobicity, and enhancement of mechanical strength. Second, we highlight that the addition of CHG can generate covalent and noncovalent interactions in a complex manner between the two biguanide groups of CHG with the AP and DTSACL via a thermal-triggered cross-linking reaction. The noncovalent interactions synergistically serve as diverse dynamic hydrogen bonds, leading to complete healing upon scratches and even showing over 80% self-healing efficiency on full-cut, while covalent bonding can effectively improve elasticity and mechanical strength. The soft nature of CHG also takes part in improving the self-healing of the copolymer. Moreover, it was discovered that the addition of CHG can enhance antimicrobial effectiveness, as demonstrated by the long-term superior antibacterial activity (100%) against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria and the antifouling function on a glass substrate and/or a silica wafer coated by the modified polymer.