Catalytic Materials Research Articles

Ultralow Catalytic Loading for Optimised Electrocatalytic Performance of AuPt Nanoparticles to Produce Hydrogen and Ammonia.

The hydrogen evolution and nitrite reduction reactions are key to producing green hydrogen and ammonia. Antenna-reactor nanoparticles hold promise to improve the performances of these transformations under visible-light excitation, by combining plasmonic and catalytic materials. However, current materials involve compromising either on the catalytic activity or the plasmonic enhancement and also lack control of reaction selectivity. Here, we demonstrate that ultralow loadings and non-uniform surface segregation of the catalytic component optimize catalytic activity and selectivity under visible-light irradiation. Taking Pt-Au as an example we find that fine-tuning the Pt content produces a 6-fold increase in the hydrogen evolution compared to commercial Pt/C as well as a 6.5-fold increase in the nitrite reduction and a 2.5-fold increase in the selectivity for producing ammonia under visible light excitation relative to dark conditions. Density functional theory suggests that the catalytic reactions are accelerated by the intimate contact between nanoscale Pt-rich and Au-rich regions at the surface, which facilitates the formation of electron-rich hot-carrier puddles associated with the Pt-based active sites. The results provide exciting opportunities to design new materials with improved photocatalytic performance for demanding sustainable energy applications.

Heterostructured Catalytic Materials as Advanced Electrocatalysts: Classification, Synthesis, Characterization, and Application

Heterostructured Catalytic Materials as Advanced Electrocatalysts: Classification, Synthesis, Characterization, and Application

Phase Engineering of High‐Entropy Alloy for Enhanced Electrocatalytic Nitrate Reduction to Ammonia

Directly electrochemical conversion of nitrate (NO3−) is an efficient and environmentally friendly technology for ammonia (NH3) production but is challenged by highly selective electrocatalysts. High‐entropy alloys (HEAs) with unique properties are attractive materials in catalysis, particularly for multi‐step reactions. Herein, we first reported the application of HEA (FeCoNiAlTi) for electrocatalytic NO3− reduction to NH3 (NRA). The bulk HEA is active for NRA but limited by the unsatisfied NH3 yield of 0.36 mg h−1 cm−2 and Faradaic efficiency (FE) of 82.66%. Through an effective phase engineering strategy, uniform intermetallic nanoparticles are introduced on the bulk HEA to increase electrochemical active surface area and charge transfer efficiency.The resulting nanostructured HEA (n‐HEA) delivers enhanced electrochemical NRA performance in terms of NH3 yield (0.52 mg h−1 cm−2) and FE (95.23%). Further experimental and theoretical investigations reveal that the multi‐active sites (Fe, Co, and Ni) dominated electrocatalysis for NRA over the n‐HEA. Notably, the typical Co sites exhibit the lowest energy barrier for NRA with *NO + H+ + e− → *NOH as the rate‐determining step.

Phase Engineering of High-Entropy Alloy for Enhanced Electrocatalytic Nitrate Reduction to Ammonia.

Directly electrochemical conversion of nitrate (NO3-) is an efficient and environmentally friendly technology for ammonia (NH3) production but is challenged by highly selective electrocatalysts. High-entropy alloys (HEAs) with unique properties are attractive materials in catalysis, particularly for multi-step reactions. Herein, we first reported the application of HEA (FeCoNiAlTi) for electrocatalytic NO3- reduction to NH3 (NRA). The bulk HEA is active for NRA but limited by the unsatisfied NH3 yield of 0.36 mg h-1 cm-2 and Faradaic efficiency (FE) of 82.66%. Through an effective phase engineering strategy, uniform intermetallic nanoparticles are introduced on the bulk HEA to increase electrochemical active surface area and charge transfer efficiency.The resulting nanostructured HEA (n-HEA) delivers enhanced electrochemical NRA performance in terms of NH3 yield (0.52 mg h-1 cm-2) and FE (95.23%). Further experimental and theoretical investigations reveal that the multi-active sites (Fe, Co, and Ni) dominated electrocatalysis for NRA over the n-HEA. Notably, the typical Co sites exhibit the lowest energy barrier for NRA with *NO + H+ + e- → *NOH as the rate-determining step.

Electrocatalytic Poly(3,4-ethylenedioxythiophene) for Electrochemical Conversion of 5-Hydroxymethylfurfural.

This study investigates the utilization of the conductive polymer poly(3,4-ethylenedioxythiophene) (PEDOT) as a catalytic material for the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA). PEDOT films doped with different counterions were electrodeposited on graphite foil. In particular, the mobile anion perchlorate and the polymeric ionomers polystyrenesulfonate, Nafion, and Aquivion were used. The electrocatalytic properties of PEDOT films were evaluated toward the TEMPO redox mediator in the absence and the presence of HMF as a substrate for oxidation reactions. The electrocatalytic HMF oxidation was confirmed to occur at PEDOT electrodes, and it was also found that the chemical nature of PEDOT counterions controls the electrocatalytic conversion of HMF by modulating the kinetics of the electrochemical generation of the oxoammonium cation TEMPO(+). Potentiostatic electrolysis experiments showed that both the reference graphite electrode and PEDOT substrates were able to convert HMF to FDCA with an 80% faradaic efficiency (FE) and a >90% yield (FDCA), but, compared to graphite, the complete conversion of HMF to FDCA required a ca. 30% shorter time when using PEDOT electrodes doped with perchlorate or Aquivion, thanks to their ability to sustain a higher current density in the initial phase of the electrolysis. In addition, while all PEDOT films were chemically stable under the electrochemical conditions herein described, only PEDOT films doped with Aquivion were also mechanically robust and stable against delamination. Thus, the new PEDOT/Aquivion composite may represent the best choice for the implementation of PEDOT-based electrodes in TEMPO-mediated electrocatalytic applications.

First-principles screening of XSbF3 (X = Ba and Ra) fluoroperovskites: An insight into structural, optoelectronic and thermal properties

Abstract This work presents a computational study of the physical properties such as structural, electronic, optical and thermal properties of XSbF3 (X = Ba and Ra) fluoroperovskites. The calculations were performed using the density functional theory (DFT) calculations in conjunction with Quantum Espresso code. The stability of the crystal structure XSbF3 compounds is determined by binding energy 〖(E〗_b) computations. The E_b values for BaSbF3 and RaSbF3 compounds are -19.25 and -20.04 eV respectively, indicating that both studied compounds are stable. The optimized lattice constants for BaSbF3 and RaSbF3 compounds are 5.03 and 5.06 Å, respectively. The evaluation of electronic properties is conducted by electronic band structure, total density of states (DOS), and partial density of states (PDOS). It is observed from the PDOS plots that the p-states of Sb and F whereas the d-states of X atoms have the major contribution in the formation of the band structure. Various optical properties have been computed and compared. The static value of ε_1 (0) highlights the metallic nature of the studied compounds while RaSbF3 stands out for having the highest recorded value of ε_2 (0). The maximum n(ω) values for BaSbF3 and RaSbF3 are 8.46 and 6.86 respectively indicating their potential for photoelectric applications. Furthermore when examining the properties it is evident that the BaSbF3 compound stands out as a material for energy storage because of its higher electron energy at 2.36 KJ/N.mol and lower electron free energy of -2.55 KJ/N.mol compared to the RaSbF3 compound. On the other hand, the RaSbF3 compound is an efficient material for catalysis due to its high ability to absorb heat energy from the external source, as compared to the BaSbF3 compound. This study is the first computational investigation of XSbF3 (X is Ba and Ra) compounds, which provides valuable insights into the physical properties of sb-based fluroperovskites and their potential applications.

Heterogeneous Porous Synergistic Photocatalysts for Organic Transformations.

Recent interest has surged in using heterogeneous carriers to boost synergistic photocatalysis for organic transformations. Heterogeneous catalysts not only facilitate synergistic enhancement of distinct catalytic centers compared to their homogeneous counterparts, but also allow for the easy recovery and reuse of catalysts. This mini-review summarizes recent advancements in developing heterogeneous carriers, including metal-organic frameworks, covalent-organic frameworks, porous organic polymers, and others, for synergistic catalytic reactions. The advantages of porous materials in heterogeneous catalysis originate from their ability to provide a high surface area, facilitate enhanced mass transport, offer a tunable chemical structure, ensure the stability of active species, and enable easy recovery and reuse of catalysts. Both photosensitizers and catalysts can be intricately incorporated into suitable porous carriers to create heterogeneous dual photocatalysts for organic transformations. Notably, experimental evidence from reported cases has shown that the catalytic efficacy of heterogeneous catalysts often surpasses that of their homogeneous analogues. This enhanced performance is attributed to the proximity and confinement effects provided by the porous nature of the carriers. It is expected that porous carriers will provide a versatile platform for integrating diverse catalysts, thus exhibiting superior performance across a range of organic transformations and appealing prospect for industrial applications.

Heterokaryotic transition-metal dimers embedded monolayer g-C3N3 as promising anchoring and electrocatalytic materials for lithium-sulfur battery: First-principles calculations

g-C3N3 not only has high content of pyridine nitrogen, but also has a special two-dimensional porous structure, which is an ideal diatomic catalytic host materials. In this work, homonuclear and heteronuclear dual-atom catalysts (DACs, TM-TM@g-C3N3, TM = Mn, Fe, Co, Ni) were constructed using single-layer g-C3N3 as the carrier material of DACs, and their potential as sulfur-hosting materials and electrocatalytic materials for lithium-sulfur batteries was explored through first principles comprehensively. The results show that the coupling between the two metal atoms in heteronuclear DACs can regulate the spin state of each other's d-electrons, so that the anchoring and catalytic effects of heteronuclear DACs on polysulfide are more excellent than that of homonuclear DACs. Co-Mn@g-C3N3, when utilized as the cathode material in lithium-sulfur batteries, offers exceptional properties due to the hybridization between Mn2+ high-spin state d electron and Co2+ half-filled dz2 orbital. This unique interaction not only enables the polysulfide to exhibit the lowest Gibbs free energy during conversion, but also results in the lowest reaction energy barrier of 0.26 eV for the conversion of Li2S2 to Li2S. Furthermore, it is found that when 3d transition metal atoms act as heteronuclear DACs, the coupling between metal ions with high-spin states at the active site and metal ions with empty orbitals or half-full d-electrons has the most significant catalytic effect on polysulfides.

PREPARATION AND CHARACTERIZATION OF BENTONITE CLAY CATALYSTS FOR TRANSESTERIFICATION OF WASTE COOKING OIL INTO BIODIESEL

The development of low-cost green catalytic materials is crucial for the conversion of non-edible vegetable oils or waste materials into biodiesel. The research focuses on the preparation and characterization of aluminium pillared clay and NaOH-doped bentonite clay catalysts for biodiesel production from waste cooking oil using XRF, XRD, FTIR and N2 adsorption-desorption techniques. The molecular profile and functional group assessment of the biodiesel were done using GC-MS and FTIR respectively. XRF analysis revealed the presence of oxides in all samples. The amount of SiO2 in all samples was within the range of 35.303–39.199 wt%. Al2O3 increased from 15.560 to 19.11 wt%, while the interlayer cations decreased after pillaring. FTIR revealed the appearance of peaks which are characteristic of bentonite. The pillaring and impregnation of NaOH with bentonite led to a distortion of certain peaks' intensity, as evidenced by FTIR results. The pillaring caused an increase in BET surface area and pore volume compared to bentonite from 302.1 to 366.4 m2/g, and 0.186 to 0.189 cc/g respectively, while a decrease in surface area and pore volume was observed in NaOH/bentonite due to impregnation. The XRD data have shown the increase of basal d-spacing of pillared clay from 12.65 to 16.49 Å relative to bentonite with a decrease to 12.45 in the case of NaOH/bentonite. The catalysts prepared outperformed neat bentonite with NaOH/bentonite, resulting in the highest yield of (83 ± 1.80). GC-MS, FTIR, and physicochemical analyses confirmed the production of fatty acid methyl esters.

Efficient Inhibition of Deep Conversion of Partial Oxidation Products in C-H Bonds’ Functionalization Utilizing O2 via Relay Catalysis of Dual Metalloporphyrins on Surface of Hybrid Silica Possessing Capacity for Product Exclusion

To inhibit the deep conversion of partial oxidation products (POX-products) in C-H bonds’ functionalization utilizing O2, 5-(4-(chloromethyl)phenyl)-10,15,20-tris(perfluorophenyl)porphyrin cobalt(II) and 5-(4-(chloromethyl)phenyl)-10,15,20-tris(perfluorophenyl)porphyrin copper(II) were immobilized on the surface of hybrid silica to conduct relay catalysis on the surface. Fluorocarbons with low polarity and heterogeneous catalysis were devised to decrease the convenient accessibility of polar POX-products to catalytic centers on the lower polar surface. Relay catalysis between Co and Cu was designed to utilize the oxidation intermediates alkyl hydroperoxides to transform more C-H bonds. Systematic characterizations were conducted to investigate the structure of catalytic materials and confirm their successful syntheses. Applied to C-H bond oxidation, not only deep conversion of POX-products was inhibited but also substrate conversion and POX-product selectivity were improved simultaneously. For cyclohexane oxidation, conversion was improved from 3.87% to 5.27% with selectivity from 84.8% to 92.3%, which was mainly attributed to the relay catalysis on the surface excluding products. The effects of the catalytic materials, product exclusion, relay catalysis, kinetic study, substrate scope, and reaction mechanism were also investigated. To our knowledge, a practical and novel strategy was presented to inhibit the deep conversion of POX-products and to achieve efficient and accurate oxidative functionalization of hydrocarbons. Also, a valuable protocol was provided to avoid over-reaction in other chemical transformations requiring high selectivity.

Fabricating a Structured Single‐Atom Catalyst via High‐Resolution Photopolymerization 3D Printing

AbstractThis study introduces a novel solution to the design of structured catalysts, integrating single‐piece 3D printing with single‐atom catalysis. Structured catalysts are widely employed in industrial processes, as they provide optimal mass and heat transfer, leading to a more efficient use of catalytic materials. They are conventionally prepared using ceramic or metallic bodies, which are then washcoated and impregnated with catalytically active layers. However, this approach may lead to adhesion issues of the latter. By employing photopolymerization printing, a stable and active single‐atom catalyst is directly shaped into a stand‐alone, single‐piece structured material. The battery of characterization methods employed in the present study confirms the uniform distribution of catalytically active species and the structural integrity of the material. Computational fluid dynamics simulations are applied to demonstrate enhanced momentum transfer and light distribution within the structured body. The materials are finally evaluated in the continuous‐flow photocatalytic oxidation of benzyl alcohol to benzaldehyde, a relevant reaction to prepare biomass‐derived building blocks. The innovative approach reported herein to manufacture a structured single‐atom catalyst circumvents the complexities of traditional synthetic methods, offering scalability and efficiency improvements, and highlights the transformative role of 3D printing in catalysis engineering to revolutionize catalysts’ design.

What Elements Really Intercalate into Pd Lattice When Heated in Dimethylformamide?

Palladium hydrides (PdHx) are pivotal in both fundamental research and practical applications across a wide spectrum. PdHx nanocrystals, synthesized by heating in dimethylformamide (DMF), exhibit remarkable stability, granting them widespread applications in the field of electrocatalysis. However, this stability appears inconsistent with their metastable nature. The substantial challenges in characterizing nanoscale structures contribute to the limited understanding of this anomalous phenomenon. Here, through a series of well-conceived experimental designs and advanced characterization techniques, including aberration-corrected scanning transmission electron microscopy (AC-STEM), in situ X-ray diffraction (XRD), and time-of-flight secondary ion mass spectrometry (TOF-SIMS), we have uncovered evidence that indicates the presence of C and N within the lattice of Pd (PdCxNy), rather than H (PdHx). By combining theoretical calculations, we have thoroughly studied the potential configurations and thermodynamic stability of PdCxNy, demonstrating a 2.5:1 ratio of C to N infiltration into the Pd lattice. Furthermore, we successfully modulated the electronic structure of Pd nanocrystals through C and N doping, enhancing their catalytic activity in methanol oxidation reactions. This breakthrough provides a new perspective on the structure and composition of Pd-based nanocrystals infused with light elements, paving the way for the development of advanced catalytic materials in the future.

Engineering Materials for Catalysis

The Special Issue “Engineering Materials for Catalysis” was inspired by the preceding 2020 Summer School of the European Federation of Catalysis Societies (EFCATS, https://skd2020 [...]

Rapid CO2 laser treatment of Pt–Fe MOF for efficient electrochemical hydrogen evolution reaction

The quest for efficient hydrogen production via electrochemical water splitting has led to extensive research on catalytic materials. This work focuses on enhancing the catalytic functionality of metal-organic frameworks (MOFs) by incorporating platinum (Pt) to improve the performance of the hydrogen evolution reaction (HER). Fe-based MOFs mixed with platinum precursors were altered through laser treatment, which caused considerable changes in their structure and catalytic activity in just 3 min. This was achieved without the need for vacuum or an inert atmosphere. Characterization techniques including X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and electrochemical measurements were used to characterize the synthesized materials. The laser-treated Pt–Fe MOF demonstrated outstanding HER performance with 3.5 wt% Pt content, outperforming commercial 20 wt% Pt/C catalysts, and exhibiting good stability even after prolonged cycling. These results highlight the potential of laser-treated MOFs for efficient and cost-effective electrochemical hydrogen generation.

Fabrication of 0D/2D CoFe2O4/CoFe LDH composite intruded within CNTs network as a high-performance electrocatalyst for oxygen evolution and hydrogen evolution reactions

Designing highly efficient and durable multicomponent heterostructured composites as catalytic materials for concomitant hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is highly desirable. Researchers all over the world are continuously working to develop such materials. Herein, CNTs wrapped CoFe2O4/CoFe LDH (CoF/CoFe LDH@CNTs) ternary composite is synthesized by hydrothermal and ultra-sonication routes. Numerous methods, including X-ray diffraction (XRD), scanning electron microscopy (SEM), cyclic voltammetry (CV), electrical Mott-Schottky, and electrochemical impedance spectroscopy (EIS) are employed to study structure, morphology, flat band potential, and electrochemical properties of prepared samples. In terms of water splitting performance, CoF/CoFe LDH@CNTs composite showed predominant performance for both HER and OER activities, as compared to its analogs (CoF and CoF/CoFe LDH). Faster electron transfer is also exhibited by CoF/CoFe LDH@CNTs, as it possesses a lower Tafel slope. For OER, CoF/CoFe, LDH@CNTs require a small overpotential of 170 mV to reach a current density of 10 mA cm−2 in 1 M KOH, with a Tafel slope of 42 mV dec-1. Similarly, for HER an overpotential of 218 mV is required to drive 10 mA cm−2 with a small Tafel slope of 31 mV dec-1. Impedance studies show a small value of charge transfer resistance (Rct = 1.11 Ω) for CoF/CoFe, LDH@CNTs. Significant electrochemical performance for CoF/CoFe, LDH@CNTs for both half-reactions (OER and HER) is ascribed to the synergy among electrochemically active CoF and CoFe LDH, and a highly conductive network of CNTs. The present strategy improves the electrochemical performance of electrochemical systems relevant to energy applications.

Cerium/sulfur co-doped spinel iron-cobalt oxide@carbon interconnected mesh networks as superior peroxymonosulfate activator for tetracycline degradation

Transition metal spinel oxides have potential applications in activating peroxymonosulfate (PMS) to generate reactive substances for degrading organics in polluted water. However, many catalytic materials have low efficiency, indicating the need for advancements in material design. In this study, we present the one-step fabrication of Ce, S-codoped spinel iron-cobalt oxide@carbon (Ce-FeCo2O4@SxC) with interconnected mesh networks for efficient PMS activation in degrading tetracycline hydrochloride (TCH). Among the Ce-FeCo2O4@SxC samples, Ce-FeCo2O4@S1.5C demonstrates the highest catalytic performance, achieving a TCH degradation efficiency of 97.2 % in 30 min. Moreover, the catalytic system also exhibits anti-interference abilities against various anions and shows universality in degrading organic pollutants. Characterization and experimental tests confirm the co-existence of radical (SO4•−, •OH and O2•−) and non-radical pathways (1O2 and direct electron transfer), with 1O2 identified as the primary reactive species. Three plausible pathways for TCH removal are proposed based on detected intermediate products. Toxicity evaluation reveals a significant reduction in the toxicity of the original TCH solution during the degradation process with the PMS activator. This study introduces a simple yet effective co-doping strategy to enhance the catalytic properties of spinel oxides for PMS activation in degrading organic contaminants in aquatic environments.

Enhancing the catalytic activity of Pd nanoparticles in the hydrolysis of ethylenediamine-bisborane through sulfonation of graphene oxide as a solid support

Ethylenediamine-bisborane (EDB), with its high hydrogen storage capacity, has been in the limelight among researchers. In this study, a new catalytic hybrid material (Pd@rGO-SO3H), comprising sulfonated reduced graphene oxide (rGO-SO3H) and palladium (Pd), was developed. This material serves as a highly efficient and reusable catalyst in the hydrogen production from EDB hydrolysis. The synthesized EDB, rGO-SO3H, and Pd@rGO-SO3H were characterized using ICP-OES, PXRD, XPS, SEM, TEM, and TEM/EDX tools. The initial TOF value of the Pd@rGO-SO3H catalyst in hydrogen production from EDB hydrolysis was calculated as 136 min−1. This TOF value was found to be remarkably high compared to related studies in the literature. The reusability performance of Pd@rGO-SO3H was observed to be quite stable. Finally, activation parameters, such as activation energy (Ea), activation enthalpy (ΔH#), and activation entropy (ΔS#) for the hydrolysis reaction, were calculated by conducting catalytic reactions at different temperatures using relevant equations.

Electrocatalytic Properties of Electrochemically‐Polymerized Metal‐Phenolic Networks

AbstractMetal‐phenolic networks (MPNs) are a promising platform for developing new heterogeneous catalytic materials for water splitting technologies. This study systematically investigates the relationship between MPN composition and catalytic properties via electropolymerization of copper and cobalt combined with lignin, tannic acid, epigallocatechin‐3‐gallate (EGCG), and gallic acid polyphenols. We find that the choice of metal, size of polyphenol, and polymerization method have the greatest impact on the propensity of MPNs for catalyzing hydrogen evolution. For example, gallic acid‐based MPNs result in smoother surfaces with ~2 nm roughness, resulting in low surface area and lower average current densities compared to all other polyphenols tested. Cobalt‐based MPNs show higher current densities compared to copper, yet higher onset potentials. The results provide a map of design choices that can be used to increase the catalytic performance of new materials used in water electrolysis.

Cellulose supported TiO2/Cu2O for highly asymmetric conjugate addition of α,β-unsaturated compounds in aqueous phase

A series of new kind green cellulose-supported bimetallic TiO2/Cu2O (Cell@TiO2/Cu2O) catalytic materials were obtained by in-situ reduction method employing cellulose as the carrier. The effects of metal percentage composition on the morphology and construction of the catalytic materials were systematically investigated. The Cell@TiO2/Cu2O were characterized by FT-IR, TG, XPS, SEM, TEM, EDS, and the element content was obtained by elemental analysis. Then, the achieved catalytic materials were applied to the chiral borylation reaction of α,β-unsaturated compounds, including nitrile compounds, esters, and α,β-unsaturated ketones. Remarkably, this approach provides an efficient strategy to gain an important class of chiral organic boron compounds with target chiral products in high yields as well as enantioselectivities. Besides, the Cell@TiO2/Cu2O could be easily recycled and effectively reused. This work constructed bimetallic TiO2/Cu2O on cellulose as a newly catalyst to obtain chiral boron compounds in aqueous phase.

Emulsion Liquid Membranes Based on Os-NP/n-Decanol or n-Dodecanol Nanodispersions for p-Nitrophenol Reduction.

Membrane materials with osmium nanoparticles have been recently reported for bulk membranes and supported composite membrane systems. In the present paper, a catalytic material based on osmium dispersed in n-decanol (nD) or n-dodecanol (nDD) is presented, which also works as an emulsion membrane. The hydrogenation of p-nitrophenol (PNP) is carried out in a reaction and separation column in which an emulsion in the acid-receiving phase is dispersed in an osmium nanodispersion in n-alcohols. The variables of the PNP conversion process and p-aminophenol (PAP) transport are as follows: the nature of the membrane alcohol, the flow regime, the pH difference between the source and receiving phases and the number of operating cycles. The conversion results are in all cases better for nD than nDD. The counter-current flow regime is superior to the co-current flow. Increasing the pH difference between the source and receiving phases amplifies the process. The number of operating cycles is limited to five, after which the regeneration of the membrane dispersion is required. The apparent catalytic rate constant (kapp) of the new catalytic material based on the emulsion membrane with the nanodispersion of osmium nanoparticles (0.1 × 10-3 s-1 for n-dodecanol and 0.9 × 10-3 s-1 for n-decanol) is lower by an order of magnitude compared to those based on adsorption on catalysts from the platinum metal group. The advantage of the tested membrane catalytic material is that it extracts p-aminophenol in the acid-receiving phase.