Catalytic Efficacy Research Articles

Enhance the Proportion of Fe3+ in NiFe-Layered Double Hydroxides by utilizing Citric Acid to Improve the Efficiency and Durability of the Oxygen Evolution Reaction.

NiFe-layered double hydroxides (NiFe-LDH) are a type of catalyst known for their exceptional catalytic performance during the oxygen evolution reaction (OER). In this study, citric acid was incorporated into the synthesis process of NiFe-LDH, resulting in the NiFe-LDH-CA catalyst with superior OER performance. The catalytic efficacy was evaluated using linear sweep voltammetry (LSV), which demonstrated a significant reduction in the overpotential for OER from 320 mV to 240 mV at a current density of 100 mA cm-2. X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) indicate that the distribution of nickel valence states showed no significant difference between two samples. However, the NiFe-LDH-CA exhibits a markedly higher proportion of Fe3+ ions in its iron content. In-situ Raman spectroscopes reveal that Fe3+ broadens the redox potential of nickel and Pourbaix diagrams indicate that higher Fe3+ levels could facilitate the interaction with oxygen active sites. Based on the analysis of test data, we propose a hypothesis that the high proportion of Fe3+ in catalysts may accelerate the oxygen evolution process by modulating the redox potential of nickel and engaging with reactive oxygen species. This provides valuable insights into how to improve the reaction rate of nickel-based catalysts.

Efficient photocatalytic degradation of Rhodamine B dye by undoped and zinc doped zirconium dioxide NPs

Undoped and Zinc-doped Zirconium Dioxide (ZrO2) nanoparticles (NPs) were synthesized via the co-precipitation method, employing Zirconium (IV) Oxynitrate hydrate (ZrO2N2·xH2O), Zinc Sulfate (ZnSO4·7H2O), and ammonia solution as precursor materials at room temperature. A comprehensive characterization of the structural, morphological, optical, and catalytic properties of the prepared samples was conducted using various techniques. Powder X-ray diffraction (PXRD) analysis revealed that the synthesized NPs exhibited a tetragonal phase structure, with crystallite sizes decreasing as doping concentration increased. Scanning electron microscopy (SEM) images confirmed the spherical shape of the NPs. Energy-dispersive X-ray spectroscopy (EDX) verified the presence of Zr, O, and Zn elements with high purity. Raman spectroscopy corroborated the tetragonal structure of the synthesized ZrO2 NPs. Ultraviolet–visible (UV–Vis) spectroscopy studies determined the cutoff wavelengths, while Tauc plot enabled the calculation of band gap energies. Fourier transform infrared spectroscopy (FTIR) confirmed the functional groups present in the synthesized samples. Photoluminescence spectroscopy provided evidence of defects and charge carrier recombination processes. The catalytic efficacy of the synthesized ZrO2 NPs was demonstrated through the degradation of Rhodamine B dye under visible and UV light.

Tetravalent metals modulated Zn-based layered double hydroxides and their mixed metal oxides for catalytic depolymerization of carbonyl-coordinating plastic waste

Plastic waste generation has become a global issue and presents a significant challenge concerning degradability in the environment. This poses a serious threat and adverse impact on the health of living creature and the environment ecosystem. The up-/re-cycling of plastic waste through catalytic depolymerization is becoming a sustainable way to reduce economic concerns about production and serious environmental impacts. Here, in the present study an effort has been made for the development of catalysts for efficient recycling of carbonyl group containing polymer waste [Polyethylene terephthalate (PET) and polycarbonate (PC)]. The sequential preparation of ZnMIV- and ZnAlMIV- LDHs (layered double hydroxides) (MIV= Zr and Ti) and their respective mixed metal oxide (MMOs) based catalytic materials, has been carried out by one-pot co-precipitation and calcination methods. The structural parameters were examined through the various characterisation techniques including XRD, FTIR, TEM, SEM, and EDS. The layered structure, high crystalline nature and hexagonal 2D-sheet/flakes like morphology with average particle size ranging from ~14 to 51nm [for LDHs] and ~6 to 21nm [for MMOs] were observed. Depolymerization of PET and PC using LDHs/MMOs catalyst in ethylene glycols (EG) produced bis(2-hydroxyethyl terephthalate) (BHET) and bisphenol A (BPA) monomers as main products, respectively. The catalyst quantity, concentration of solvent, recyclability of catalysts, reaction duration, and crystallization time have also been further investigated for better yield during catalytic glycolysis. The isolated monomers were further characterized by using melting point, mass spectroscopy, 1H-NMR, 13C-NMR and FTIR analysis. The order of catalytic activities of prepared samples as ZnTi-LDH˃ ZnAlTi-LDH ˃ ZnTi-MMO˃ ZnAlZr-LDH˃ ZnAlTi-MMO˃ ZnZr-LDH in PET depolymerization while in case of PC, the order as ZnTi-LDH˃ ZnAlTi-LDH ˃ ZnZr-LDH˃ ZnAlZr-LDH˃ ZnZr-MMO˃ ZnAlZr-MMO˃ ZnTi-MMO˃ ZnAlTi-MMO were observed. LDH samples showed higher catalytic conversion than their respective MMOs during PET and PC depolymerization into monomers BHET and BPA with % yield of ~76-83% and ~81-89%, respectively. ZnTi-LDH shows high catalytic efficacy in depolymerization of PET and PC with yield of (~82%) BHET monomer and (89%) BPA. This catalyst displayed good recyclability more than eight cycles during this catalytic glycolysis study.

Simplified synthesis of Pt-MnOx supported on three dimensional Co3O4 for catalytic removal of toluene

In this study, a simplified method was developed for synthesizing Pt-(MnOx)/three-dimensional (3D)-Co3O4 catalysts. This approach represents a convenient alternative to the typical procedure of initially synthesizing nanoparticles (NPs) and subsequently depositing them onto supports. The Pt1-(MnOx)1/3D Co3O4 catalyst, with a molar ratio of Pt:Mn=1:1, demonstrated excellent catalytic efficacy at a comparatively low reaction temperature and displayed commendable thermal stability during prolonged operation in the deep oxidation of toluene. The T90 (temperature required for 90% conversion) of Pt1-(MnOx)1/3D Co3O4 was merely 163 °C. Characterization analysis revealed that the catalyst's remarkable catalytic efficiency is attributed to the elevated concentration of oxygen vacancy defects on Pt1-(MnOx)1/3D Co3O4 and its low-temperature reducibility. In situ DRIFTS analysis was conducted to investigate the possible reaction pathway of Pt1-(MnOx)1/3D Co3O4. The results indicated that the rapid dehydrogenation of methyl and the demethylation of toluene facilitate the cleavage of the benzene ring on the Pt1-(MnOx)1/3D Co3O4 catalyst, due to the abundant absorption of oxygen species. This process enhances the catalytic combustion of toluene

Exploring Alkali Hydroxide Influence on Calcium Titanate Formation for Application in Biodiesel Catalysts

Biodiesel has been recognized as the most widely utilized biofuel around the world due to its significant role in reducing the consumption of crude oil and lowering environmental pollution levels. By serving as a renewable alternative to fossil fuels, bioethanol helps decrease greenhouse gas emissions and contributes to a more sustainable energy future. Traditionally, alkali hydroxides like NaOH and KOH have been mainstays in biodiesel synthesis. However, their overuse can lead to unwanted byproducts and operational complexities. Since calcium titanate can occur at a strong base condition, it presents an alternative avenue worth exploring. In this study, we investigate the influence of alkali hydroxides, namely LiOH, NaOH, and KOH, on the formation of calcium titanate through hydrothermal methods, with varying heating times. We aim to understand how different hydroxides affect the synthesis process and the resultant properties of calcium titanate. We delve into the vibrational properties of Ca‒O‒Ti and Ti‒O bonds using Fourier transform infrared spectroscopy (FTIR), confirming the presence of calcium titanate (JCPDS No.42-0423) through X-ray diffractometry (XRD). This thorough characterization provides insight into the structural integrity and composition of the synthesized materials. Moreover, scanning electron microscopy (SEM) reveals the intriguing cube-like morphology of calcium titanate, offering visual evidence of its unique structure. The fatty acid methyl ester Iimpressively, our results show that calcium titanate synthesized in 7 M NaOH and KOH solutions, heated for 24 hours, emerges as a promising biodiesel catalyst. We observe fatty acid methyl ester provides the percentages of 63.67% and 90.02%, respectively, indicating the catalytic efficacy of these materials in biodiesel production. These findings not only contribute to the understanding of calcium titanate synthesis but also pave the way for a sustainable future in biodiesel production by introducing efficient and eco-friendly catalysts.

Dysprosium chromite nanoparticles: A promising photocatalyst for the remediation of ciprofloxacin and methylene blue from wastewater

A facile sol-gel synthesis method was employed to synthesize dysprosium chromite (DyCrO3) nanoparticles (NPs), which were subsequently calcined at 750 ∘C to investigate their structural, optical, and photocatalytic properties. Rietveld refinement of powder X-ray diffraction patterns revealed a single-phase orthorhombic structure for the DyCrO3 NPs, exhibiting good crystallinity and belonging to the Pbnm space group. Furthermore, Field Emission Scanning Electron Microscopy and Transmission Electron Microscopy imaging revealed a promising morphology with an average particle size of 30 ± 7 nm. Optical assessments indicated an energy band gap of 2.72 eV, suggesting potential for solar light harvesting as a photocatalyst. Mott-Schottky plots confirmed the n-type semiconductor behavior of the DyCrO3 NPs, and valence band X-ray photoelectron spectroscopy analysis supported these findings. Electronic band structure calculations showed a substantial conduction band minimum and a positive valence band maximum, essential for promoting oxygen reduction and oxidation reactions, respectively, which are crucial for photocatalytic activity. Moreover, the synthesized DyCrO3 NPs demonstrated significant potential as efficient photocatalysts, effectively decomposing the antibiotic ciprofloxacin (CIP) under solar light. Notably, the DyCrO3 NPs achieved 83 % degradation of CIP within 240 min of solar irradiation. Similarly, under identical conditions, the DyCrO3 NPs photocatalyst showed promise in degrading 70 % of the colored organic pollutant methylene blue (MB). Interestingly, during the first 120 min, the degradation of CIP was approximately 25 % greater than that of MB. The ability of DyCrO3 NPs to efficiently degrade both colored and colorless pollutants highlights the catalyst’s inherent photocatalytic nature, rather than merely relying on dye-sensitization effects. Furthermore, the presence of DyCrO3 NPs reduced the activation energy for CIP degradation from 31.657 kJ mol−1 K−1 to 20.846 kJ mol−1 K−1, providing additional evidence of their true catalytic efficacy. Apparent quantum yield values of 40 % for CIP and 35 % for MB degradation further illustrate their superior solar energy harvesting ability. A comprehensive mechanism was developed to explain the impressive photocatalytic performance of the synthesized NPs, highlighting their potential in degrading pharmaceutical antibiotics.

In silico-guided synthesis of a new, highly soluble, and anti-melanoma flavone glucoside: Skullcapflavone II-6'-O-β-glucoside.

Guided by in silico analysis tools and biotransformation technology, new derivatives of natural compounds with heightened bioactivities can be explored and synthesized efficiently. In this study, in silico data mining and molecular docking analysis predicted that glucosides of skullcapflavone II (SKII) were new flavonoid compounds and had higher binding potential to oncogenic proteins than SKII. These benefits guided us to perform glycosylation of SKII by utilizing four glycoside hydrolases and five glycosyltransferases (GTs). Findings unveiled that exclusive glycosylation of SKII was achieved solely through the action of GTs, with Bacillus subtilis BsUGT489 exhibiting the highest catalytic glycosylation efficacy. Structure analysis determined the glycosylated product as a novel compound, skullcapflavone II-6'-O-β-glucoside (SKII-G). Significantly, the aqueous solubility of SKII-G exceeded its precursor, SKII, by 272-fold. Furthermore, SKII-G demonstrated noteworthy anti-melanoma activity against human A2058 cells, exhibiting an IC50 value surpassing that of SKII by 1.4-fold. Intriguingly, no substantial cytotoxic effects were observed in a murine macrophage cell line, RAW 264.7. This promising anti-melanoma activity without adverse effects on macrophages suggests that SKII-G could be a potential candidate for further preclinical and clinical studies. The in silico tool-guided synthesis of a new, highly soluble, and potent anti-melanoma glucoside, SKII-G, provides a rational design to facilitate the future discovery of new and bioactive compounds.

Mild acidic charcoal: adsorption, analysis, and application.

The adsorption of glacial acetic acid over a charcoal support was investigated. The amount of adsorption was analyzed using a traditional titration method and the prepared adsorbed system was employed as a heterogeneous catalyst for organic reactions as a viable application. Different 14-aryl-14H-dibenzo[a,j]xanthenes were synthesized using mild acidic charcoal as a catalyst and yields of 88%-94% were obtained. The advantages of this method include the easy preparation of a cheaper and environmentally safe catalyst system, a simple work-up procedure, and excellent catalytic efficacy.

Bio-templating approach and DFT study of ZrMo@KIT-6 catalyst for the conversion of deep fried oil into sustainable biodiesel production

In this study, highly porous ZrMo@KIT-6 heterogeneous catalyst was developed using Aloevera gel along with Pluronic as a mixed template. The catalytic activity was executed in biodiesel production from low valued deep fried oil to develop a sustainable energy approach. The physiochemical properties of the developed catalyst were assessed in depth using different analytical techniques including, TGA, XRD, BET, TPD-NH3, FESEM- EDX and XRD analyses. It was noted that the catalyst synthesized with Aloevera gel and Pluronic mixed template possessed improved texture, morphological properties and evenly distributed active centers with total acidity of 0.95 mmol/g and surface area of 741.46 m2/g. These experimental results were further endorsed by DFT analysis. Moreover, the designed catalystexhibited paramounted catalytic efficacy in transesterification reaction of deep fried oil into biodiesel, providing a phenomenal 97.7 % biodiesel yield under optimal reaction conditions. Apart from this, the designed catalyst sustained catalytic activity up to five times with biodiesel yield 87 %. Thus, the designed catalyst presents a novel fuel strategy which will bring both financial and environmental sustainability in the future.

Nanoarchitectonics of Nickel Nitride‐V2CTX Mxene: An Efficient Bifunctional Catalyst for Alkaline Water/Seawater Applications

AbstractSeawater, being the most plentiful natural water source worldwide, is a highly abundant and cost‐efficient medium for producing hydrogen by alkaline water electrolysis. However, the advancement of seawater electrolysis is hindered by notable impediments caused by chloride corrosion at the anode and the simultaneous chlorine evolution process. Only a limited number of non‐noble electrocatalysts demonstrate noteworthy bifunctional catalytic efficacy and long‐term durability. In this regard, Nickel Nitride tailored V2CTX Mxene nanostructures is reported as a bifunctional catalyst for overall water/seawater applications. The optimized sample Ni3N@3000‐V2CTx exhibits low overpotential values of 90 and 300 mV in acidic and alkaline + seawater solutions respectively at 10 mA cm−2 for hydrogen evolution reaction. Similarly, this catalyst shows 70 and 240 mV overpotential values in alkaline water and alkaline + seawater solutions respectively at the same current density for oxygen evolution reaction. Synergetic effects of Multiple Vanadium and Nickel valency along with compelling nitrogen bonds creates elevated density of exposed functional sites for electrocatalytic activity. Furthermore, the notable electrochemical active surface area and mass activity suggest an enhanced and significant presence of abundant active sites. Additionally, the high stability and significantly decreased charge transfer resistance expedited the overall water/seawater‐splitting reaction rate.

Physicochemical Investigations of Magnetite Persulfate Ozone Hybrid System for the Removal of Tartrazine Dye from Aqueous Solution

ABSTRACT This study involved the synthesis of magnetite nanoparticles by co-precipitation method. The synthesized nanoparticles were subsequently evaluated for their catalytic efficacy in the degradation and ozonation of tartrazine dye (TTD), employing sodium persulfate as a catalyst both in the presence and absence of ozone. The material characterization revealed that synthesized Fe3O4 nanoparticles were proven to have a crystalline structure by XRD. While spherical agglomerates with a flower-like morphology were revealed by the SEM, similarly FT-IR detected Fe – O – Fe and O – H bond vibrations, boosting surface area and catalytic activity. The degradation of the TTD was assessed in a laboratory-scale reactor, and its progress was monitored using UV-visible spectrophotometry. A comparative analysis of the two methods revealed that the catalytic ozonation demonstrated superior efficacy compared to the catalytic degradation, achieving a maximum degradation of 94.35% within 25 min of contact time. Optimal degradation parameters included a TTD concentration of 50 ppm, magnetite dosage of 0.75 g, persulfate concentration of 8 mm, and ozone inlet concentration of 5 g/L at pH 3. Evaluation of the degradation kinetics indicated the second-order kinetics model as the most appropriate, suggesting a physicochemical nature of the dye removal process. Furthermore, the study demonstrates enhanced efficiency in TTD decomposition compared to conventional methods.

Post-synthetic modification of Zr-based metal organic framework by schiff base zinc complex for catalytic applications in a click reaction

A novel nanocatalyst, denoted as UiO-66/Sal-ZnCl2, has been synthesized and systematically characterized employing a range of analytical techniques, including Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), Brunauer–Emmett–Teller (BET) surface area analysis, and inductively coupled plasma (ICP) analysis. The comprehensive analyses collectively affirm the effective coordination of zinc chloride onto the functionalized UiO-66. Subsequently, the catalytic efficacy of UiO-66/Sal-ZnCl2 was assessed in a one-pot, three-component click reaction involving terminal alkynes, alkyl halides, and sodium azide, conducted in an aqueous medium. The catalyst demonstrated remarkable catalytic activity, showcasing the capability to facilitate the reaction with high yields and exceptional regioselectivity. Noteworthy attributes of this nanocatalyst and the method include its elevated efficiency, recyclability, convenient product workup, and, significantly, the utilization of a sustainable solvent medium. The synthesis, characterization, and catalytic performance of this catalyst collectively contribute to its potential as an innovative and reusable nanocatalyst for diverse synthetic transformations.

Ordered Mesoporous Nitrogen Dope Carbon Synthesized from Aniline for Stabilization of Ruthenium Species in CO2 Hydrogenation to Formate

The hydrogenation of CO2 to produce formic acid has garnered increasing interest as a means to address climate change and promote the hydrogen economy. This research investigates the nanocasting technique for the synthesis of ordered mesoporous nitrogen-doped carbon (MNC-An). KIT-6 functioned as the silica template, while aniline served as the nitrogen–carbon precursor. The resultant MNC-An exhibits cubic Ia3D geometry, possesses significant mesoporosity, and has a high nitrogen content, which is essential for stabilizing ruthenium single atoms. The catalyst exhibited a specific activity of 252 mmolFAgcat−1 following a 2 h reaction at 120 °C. Moreover, the catalyst exhibited exceptional relative activity during five recycling experiments while preserving its catalytic efficacy. The atomically dispersed ruthenium and its Ru3+ oxidation state demonstrated perseverance both before and after the treatment. The results indicated that the synthesized catalyst possesses potential for the expedited commercialization of CO2 hydrogenation to produce formic acid. The elevated carbon yield, along with excellent thermal stability, renders it a viable substrate for attaching and stabilizing atomically dispersed ruthenium catalysts.

Synthesis of alternating polyesters using a dual catalytic system of alkali metal alkoxides and crown ether

In this study, a dual catalytic system that merges crown ether with alkali metal alkoxides (AMA) is utilized in the ring-opening alternating polymerization (ROAP) of phthalic anhydride (PA) and propylene oxide (PO). This method streamlines the production of polyesters characterized by a fully alternating sequence, a modifiable molar mass (achieving up to 59.3 kg mol−1), and a narrow molar mass distribution (ÐM < 1.26). Analysis of various commercially available AMAs, notably sodium ethoxide (EtONa), sodium methoxide, and lithium ethoxide, in tandem with crown ethers (15-crown-5 and 18-crown-6), underscores the superior catalytic efficacy of the EtONa and 18-crown-6 pairing. This heightened efficiency is attributed to the coordination of crown ether with alkali metal ions, thereby boosting the nucleophilicity of terminal alkoxide anions. The methodology has been successfully deployed in the ROAP of PA, norbornene anhydride, and multiple epoxides, while also simplifying the creation of aliphatic–aromatic block polyesters from a mixture of PA, PO, and lactide. This strategy presents a straightforward approach to polyester production, thus making significant contributions to the evolution of polyester synthesis technology.

Catalytic benzylation of arenes using metal-ion modified HY zeolites for sustainable synthesis

Microporous zeolites are commonly employed as catalysts for the benzylation of arenes and benzyl alcohol. However, their catalytic efficiency is often compromised by diffusion limitations, particularly in reactions involving larger arenes. In this study, we developed metal-ion modified HY zeolites using Zn, Mg, and Ni as dopants and investigated their catalytic performance in the benzylation of a range of arenes, including toluene, benzene, mesitylene, p-xylene and with benzyl alcohol (BzOH). The structural and acidic properties of the modified HY zeolites were characterized using a combination of techniques including scanning electron microscopy (SEM), X-ray diffraction (XRD), N₂ adsorption–desorption isotherms, Fourier-transform infrared (FTIR) spectroscopy, ammonia temperature-programmed desorption (NH₃-TPD), and proton magic angle spinning nuclear magnetic resonance (1H MAS NMR) spectroscopy. The presence of catalytically active Brønsted acid sites (BAS) was detected by 1H MAS NMR spectroscopy and it was demonstrated that the HY zeolite's acidity is considerably modulated by the addition of metal ions. The catalytic evaluations indicated that the metal-ion modified HY zeolites exhibited superior activity compared to unmodified HY zeolite, with the catalytic performance following the order Zn/HY > Ni/HY > Mg/HY > HY for the benzylation of benzyl alcohol with mesitylene. Further investigation into the mechanism revealed that the synergistic effect of metal ions and acidity plays a crucial role in enhancing the accessibility of arenes to the surface catalytic sites and thereby improving catalytic performance. These findings underscore the importance of the metal-acidity synergy in optimizing the catalytic efficacy of modified HY zeolites for selective benzylation reactions.

Construction of Donor-Acceptor-Type Conjugated Microporous Polymers by Oxidative Coupling of Boranil-Carbazole Mixed Monomers for Enhanced Photocatalytic Oxidation.

Conjugated microporous polymers (CMPs), featuring photoactive structures, a high surface area, robust thermal stability, and facile modulation, provide a versatile platform for fabricating diverse heterogeneous photocatalysts. The incorporation of donor-acceptor (D-A) structures into CMPs to increase their charge separation potential and enhance the photocatalytic efficacy is a viable strategy. In this work, we designed and synthesized a unique set of D-A monomers, incorporating boranil dyes as electron-deficient moieties and carbazoles as electron-rich subunits. Subsequently, D-A CMPs were prepared via an economical and environmentally friendly oxidation coupling reaction, and their potential in photocatalytic oxidation reactions was investigated. Modulation of the polymer's photoelectronic properties and photocatalytic performance can be achieved by adjusting the boranil content in the monomer. The polymer pCZFB-3, with the highest content of boranil units, exhibited an optimal photocatalytic activity. This finding confirms that strengthening the D-A effect can significantly enhance a catalyst's photoelectronic properties and catalytic efficacy. This study presents insights into designing innovative heterogeneous photocatalysts based on boron-containing dyes.

Stoichiometric-Ratio-Controlled Fe and Ni Non-noble Metal Catalysts Supported on γ-Al2O3 for Turquoise Hydrogen and Carbon Nanotubes Production.

Herein, we synthesized a series of catalysts comprising iron (Fe), and nickel (Ni) supported on γ-Al2O3 nanopowder (Fe-Ni/γ-Al2O3) by controlling the stoichiometric ratio of the metals through the facile co-precipitation method. The ratio of Fe and Ni on the γ-Al2O3 support varied from 0 to 70 weight percent (wt%). The freshly prepared catalysts' phase, structure, and crystallinity exhibited variability as the Fe and Ni stoichiometric ratios were altered. The catalyst demonstrated effective performance in methane cracking, producing turquoise hydrogen and carbon nanotubes (CNTs) using a temperature-programmed reactor coupled with mass spectrometry. It was observed that the Fe3Ni4 catalyst, comprising 30% Fe and 40% Ni, exhibited a maximum methane conversion rate of 85% and a hydrogen yield of 72.55%. Moreover, the values of turnover frequency (2.38 min-1) indicated that the Fe3Ni4 had a better production rate and was consistent with the conversion process throughout the reaction. The structural attributes of the spent catalysts were examined, revealing variations in the lateral length, uniformity, and diameters (~33 to 56 nm) of the produced Carbon Nanotubes (CNTs) when transitioning from catalyst Fe0Ni7 to Fe7Ni0. The investigation underscored the significance of metal stoichiometrically controlled catalysts and their catalytic efficacy in methane cracking applications.

Enhanced Real‐Time Monitoring of Catalytic Therapy Efficacy with Dual‐Channel MRI and Fluorescent Platform

AbstractCatalytic therapies, such as chemodynamic therapy and ferroptosis, harness the tumor microenvironment to enhance the specificity and penetration of treatments, thus improving targeted tumor therapy. Despite these advancements, treatment effectiveness varies due to individual differences, making precise monitoring of drug activity and dosage essential to optimize therapy. Traditional imaging strategies, which monitor metal ion release or reactive oxygen species production, frequently fail to well correlate with therapeutic outcome. Herein, this study have developed an integrated self‐monitoring catalytic therapy platform that combines palladium‐ and manganese‐based nanoparticles (PdMn NPs) with caspase‐3 activated probe (Casp probe). Dual‐channel MRI and fluorescent probe, responsive to both low pH and caspase‐3 activity, significantly enhances the accuracy of real‐time therapeutic evaluations, allowing for early reporting treatment response (in 6 h), earlier than tumor volume reduction (8 days). This approach improves the assessment of therapeutic outcomes and aligns with the shift toward individualized cancer treatment protocols.

Enhancing catalytic oxidation of benzene with Cu-Doped MnO2: Insights into structural defects and electronic modifications

The present research focuses on the role of copper (Cu) doping in enhancing the catalytic efficacy of manganese dioxide (α-MnO2) for benzene oxidation, a representative volatile organic compound (VOC). Despite the abundance and low cost of MnO2, its pristine form requires improvement for industrial VOC oxidation processes. Utilizing a range of characterization methods, the study reveals that Cu doping generates oxygen vacancies and increases the Mn3+ content within the catalyst structure, which are crucial for enhancing the adsorption and activation of reactants. The findings indicate that Cu-doped α-MnO2 exhibits superior catalytic activity and lower activation energy for benzene oxidation compared to the undoped counterpart. The electronic interactions induced by the doping of Cu and the effect on the catalytic process are demonstrated and discussed in depth. This work emphasizes the strategic importance of dopant optimization and contributes to the advancement of MnO2-based catalysts for environmental remediation, aligning with goals of environmental protection and human health safety.

Efficient catalysis for acidic methanol oxidation: Exploration of a Low-Platinum quaternary alloy catalyst via a Two-Step method

The quest for platinum-based catalysts with enhanced catalytic efficacy and durability during the methanol oxidation reaction (MOR) has been a focal point in energy conversion science. Traditional platinum-based catalysts are often constrained by their high platinum content, which escalates economic costs and complicates experimental protocols. In this study, we introduce a low-platinum-loaded catalyst synthesized via a two-step method, which incorporates a four-component alloy. This innovative approach significantly reduces platinum content while maintaining superior catalytic performance through precise control over the alloy’s composition and structure. The two-step synthesis methodology streamlines the conventional multi-step processes, enhancing the catalyst preparation’s efficiency and reproducibility. The resulting PtCoSnCu/N-C alloy catalyst exhibits remarkable catalytic activity in methanol solution, with mass activity and specific activity that are 9.73 and 9.75 times higher, respectively, than those of commercial platinum on carbon (Pt/C) catalysts. Notably, the optimized PtCoSnCu/N-C alloy catalyst demonstrates exceptional long-term stability, outperforming Pt/C in aging and extended stability tests. Density functional theory (DFT) calculations elucidate the optimization of the electronic structure and the synergistic effect of surface atoms in the PtCoSnCu/N-C catalyst, which mitigates the adsorption energy of CO molecules and enhances the utilization rate of active sites during the oxidation process. This research presents a paradigm-shifting low-platinum catalyst strategy for methanol fuel cells, establishing a theoretical foundation for catalyst design and optimization.