Catalytic Chains Of Aspartate Transcarbamoylase Research Articles

Random circular permutation leading to chain disruption within and near alpha helices in the catalytic chains of aspartate transcarbamoylase: effects on assembly, stability, and function.

A collection of circularly permuted catalytic chains of aspartate transcarbamoylase (ATCase) has been generated by random circular permutation of the pyrB gene. From the library of ATCases containing permuted polypeptide chains, we have chosen for further investigation nine ATCase variants whose catalytic chains have termini located within or close to an alpha helix. All of the variants fold and assemble into dodecameric holoenzymes with similar sedimentation coefficients and slightly reduced thermal stabilities. Those variants disrupted within three different helical regions in the wild-type structure show no detectable enzyme activity and no apparent binding of the bisubstrate analog N:-phosphonacetyl-L-aspartate. In contrast, two variants whose termini are just within or adjacent to other alpha helices are catalytically active and allosteric. As expected, helical disruptions are more destabilizing than loop disruptions. Nonetheless, some catalytic chains lacking continuity within helical regions can assemble into stable holoenzymes comprising six catalytic and six regulatory chains. For seven of the variants, continuity within the helices in the catalytic chains is important for enzyme activity but not necessary for proper folding, assembly, and stability of the holoenzyme.

Random circular permutation of genes and expressed polypeptide chains: application of the method to the catalytic chains of aspartate transcarbamoylase.

Recent studies on proteins whose N and C termini are in close proximity have demonstrated that folding of polypeptide chains and assembly of oligomers can be accomplished with circularly permuted chains. As yet no methodical study has been conducted to determine how extensively new termini can be introduced and where such termini cannot be tolerated. We have devised a procedure to generate random circular permutations of the catalytic chains of Escherichia coli aspartate transcarbamoylase (ATCase; EC 2.1.3.2) and to select clones that produce active or stable holoenzyme containing permuted chains. A tandem gene construct was made, based on the desired linkage between amino acid residues in the C- and N-terminal regions of the polypeptide chain, and this DNA was treated with a suitable restriction enzyme to yield a fragment containing the rearranged coding sequence for the chain. Circularization achieved with DNA ligase, followed by linearization at random with DNase I, and incorporation of the linearized, repaired, blunt-ended, rearranged genes into a suitable plasmid permitted the expression of randomly permuted polypeptide chains. The plasmid with appropriate stop codons also contained pyrI, the gene encoding the regulatory chain of ATCase. Colonies expressing detectable amounts of ATCase-like molecules containing permuted catalytic chains were identified by an immunoblot technique or by their ability to grow in the absence of pyrimidines in the growth medium. Sequencing of positive clones revealed a variety of novel circular permutations. Some had N and C termini within helices of the wild-type enzyme as well as deletions and insertions. Permutations were concentrated in the C-terminal domain and only few were detected in the N-terminal domain. The technique, which is adaptable generally to proteins whose N and C termini are near each other, can be of value in relating in vivo folding of nascent, growing polypeptide chains to in vitro renaturation of complete chains and determining the role of protein sequence in folding kinetics.

A bifunctional fusion protein containing the maltose-binding polypeptide and the catalytic chain of aspartate transcarbamoylase: assembly, oligomers, and domains

The in vivo synthesis of many target proteins or polypeptides has been enhanced dramatically and their purification facilitated through the use of gene fusion techniques which lead to the expression of fusion proteins. This approach was used to characterize the product formed in Escherichia coli encoded by a DNA construct comprising malE, the gene encoding maltose binding protein, linked to a small 30 nucleotide region which, in turn, was linked to pyrB, the gene encoding the catalytic (c) chains of aspartate transcarbamoylase (ATCase). The resulting fusion protein, MBP-C, was produced in excellent yield and readily purified in two steps because of its binding to an amylose column and displacement by maltose. The complex was studied by both sedimentation velocity and sedimentation equilibrium and shown to be a trimer of c chains with one MBP linked covalently to each chain. Treatment of the fusion protein with factor Xa cleaved each chain at the tetrapeptide encoded by the linker region yielding purified MBP with a minor modification at the C-terminus and the catalytic (C) trimer of ATCase. The MBP-C complex was fully active as an enzyme and could be reversibly denatured in 6 M urea. Scanning calorimetry studies on the fusion protein demonstrated that the MBP domain melted at the same temperature as did the purified protein. Similarly, the T m for the C trimer in the complex was identical to the value for C trimer isolated from ATCase. Moreover, the thermal stability of the C trimer in the MBP-C complex was greatly enhanced by the addition of the bisubstrate ligand, N-(phosphonacetyl)- l-aspartate (PALA), just as observed with purified C trimer. Analogous denaturation experiments with varying concentrations of guanidine-HCl indicated that the fusion protein was denatured at much lower concentration of denaturant than observed for C trimer. These experiments demonstrate that the linker between the two structural genes encodes a polypeptide of sufficient length to permit independent folding and assembly of each protein and permit the subsequent specific cleavage at the factor Xa recognition site, thereby yielding both active proteins.

Aspartate transcarbamoylase containing circularly permuted catalytic polypeptide chains.

Based on the demonstration that active enzyme is formed in vitro and in vivo from polypeptide fragments of the catalytic chains of aspartate transcarbamoylase (ATCase; EC 2.1.3.2) and the evidence that NH2 and COOH termini of wild-type chains are in close proximity, we constructed altered genes to determine whether circularly permuted catalytic chains could fold and assemble into active catalytic trimers. Two slightly different genetic constructs led to the expression in good yield of circularly permuted catalytic chains, which associated in vivo into active trimers. They, in turn, combined in vitro with wild-type regulatory dimers to form ATCase-like molecules. Both polypeptide chains began at residue 235 in a different domain from the NH2 terminus of wild type and had an overlapping sequence of eight residues at the COOH terminus. One had a six-amino-acid linker, and the other had a deletion of four residues. Enzymes containing rearranged chains were similar to their wild-type counterparts in physical properties. Whereas values of Vmax were close to those of wild-type trimers and ATCase, the Km values were more than 10-fold greater. Also the allosteric properties characteristic of wild-type ATCase were lacking in the enzymes containing permuted chains. Denaturation of trimers by urea was reversible, and recovery of activity in both rate and yield was comparable to that of wild-type trimers. The experiments demonstrate that folding of chains into clearly defined domains and the assembly of active, thermodynamically stable oligomers are not dependent on the positions of NH2 and COOH termini; the folded structures are a consequence of the final sequence and not the order of biosynthetic addition of amino acids.

Importance of a conserved residue, aspartate-162, for the function of Escherichia coli aspartate transcarbamoylase.

Aspartate-162 in the catalytic chain of aspartate transcarbamoylase is conserved in all of the sequences determined to date. The X-ray structure of the Escherichia coli enzyme indicates that this residue is located in a loop region (160's loop) that is near the interface between two catalytic trimers and is also close to the active site. In order to test whether this conserved residue is important for support of the internal architecture of the enzyme and/or involved in transmitting homotropic and heterotropic effects, the function of this residue was studied using a mutant version of the enzyme with an alanine at this position (Asp-162----Ala) created by site-specific mutagenesis. The Asp-162----Ala enzyme exhibits a 400-fold reduction in the maximal observed specific activity, approximately 2-fold and 10-fold decreases in the aspartate and carbamoyl phosphate concentrations at half the maximal observed specific activity respectively, a loss of homotropic cooperativity, and loss of response to the regulatory nucleotides ATP and CTP. Furthermore, equilibrium binding studies indicate that the affinity of the mutant enzyme for CTP is reduced more than 10-fold. The isolated catalytic subunit exhibits a 660-fold reduction in maximal observed specific activity compared to the wild-type catalytic subunit. The Km values for aspartate and carbamoyl phosphate for the Asp-162----Ala catalytic subunit were within 2-fold of the values observed for the wild-type catalytic subunit. Computer simulations of the energy-minimized mutant enzyme indicate that the space once occupied by the side chain of Asp-162 may be filled by other side chains, suggesting that Asp-162 is important for stabilizing the internal architecture of the wild-type enzyme.

Long range effects of amino acid substitutions in the catalytic chain of aspartate transcarbamoylase. Localized replacements in the carboxyl-terminal alpha-helix cause marked alterations in allosteric properties and intersubunit interactions.

A single alpha-helical polypeptide segment of 21 amino acids near the carboxyl terminus of the catalytic chain of aspartate transcarbamoylase from Escherichia coli has been shown recently to be important for the in vivo folding of the chains and assembly of the enzyme (Peterson, C. B., and Schachman, H. K. (1991) Proc. Natl. Acad. Sci. U.S.A. 88, 458-462). Calorimetric measurements on purified mutant enzymes showed that single amino acid replacements within this secondary structural element affect the overall thermal stability of the oligomeric enzyme and the energetics of the interactions between polypeptide chains within the holoenzyme. Studies presented here demonstrate that marked changes in cooperativity occur due to single amino acid substitutions. Replacement of Gln288 by either Ala or Glu leads to a striking increase in the Hill coefficient of the holoenzymes and a substantial increase in the aspartate concentration corresponding to one-half Vmax. In contrast, the isolated catalytic trimers harboring these same substitutions were similar in activity to the wild-type subunit, with the same affinity for aspartate as indicated by the values of Km. Substituting Ala for the only charged residue in the helix, Arg296, caused a marked reduction in enzyme activity, as well as a greatly reduced stability of the holoenzyme due to a substantial weakening of the interactions between the catalytic and regulatory subunits. A subunit exchange method was used to demonstrate the changes in interchain interactions resulting from the amino acid substitutions and to show the additional weakening upon the binding of the bisubstrate ligand, N-(phosphonacetyl)-L-aspartate, at the active sites. Taken together, the results on this series of mutant enzymes illustrate how the effects of single amino acid replacements in one element of secondary structure are propagated throughout the molecule to positions remote from the site of the substitution.

Site-specific substitutions of the Tyr-165 residue in the catalytic chain of aspartate transcarbamoylase promotes a T-state preference in the holoenzyme.

The amino acid residue Tyr-165C of aspartate transcarbamoylase (EC 2.1.3.2) of Escherichia coli has been proposed to be involved in the transition from the T-state to the R-state upon binding of the bisubstrate analogue N-(phosphonacetyl)-L-aspartate. Site-specific mutagenesis has been used to substitute phenylalanine for tyrosine, thus maintaining the aromatic R-group but removing the charged hydroxyl moiety. This mutation dramatically altered the aspartate requirements for the holoenzyme but did not substantially affect the homotropic or heterotropic characteristics of the oligomer. The aspartate requirements for half-maximal saturation increased from 5.5 mM at pH 7.0 for the native holoenzyme to approximately 90 mM in the mutant enzyme. Nonetheless, estimates of the kinetic cooperativity index remained similar (Hill coefficients: Tyr-165C, n = 2.1; Phe-165C, n = 2.5). CTP inhibited both enzymes approximately 70% and ATP activated approximately 40% at the aspartate concentrations required for half-maximal saturation (5 and 90 mM, respectively). The maximal velocity of the mutant holoenzyme is almost identical to that of the wild-type enzyme. The phenylalanine substitution does not affect the stability of the holoenzyme to heat or mercurials, and the Vmax of the catalytic trimer was 444% greater than that of the holoenzyme. Upon dissociation of the wild-type native enzyme into catalytic trimers, the Vmax increased 450%. The Km for aspartate in the separated catalytic trimer is approximately 2-fold higher than for the native catalytic trimer (16.5 versus 8 mM at pH 7.0). It is clear from the data that although Tyr-165C is not directly involved in the active site of the enzyme, it does play a pivotal role in catalytic transitions of the holoenzyme. In addition, the homotropic and heterotropic characteristics of the enzyme do not seem to be altered by the substitution of phenylalanine for Tyr-165C in the E. coli aspartate transcarbamoylase, although other substitutions have been reported (Robey, E. H., and Schachman, H. K. (1984) J. Biol. Chem. 259, 11180-11183) which show more complex effects.

Location of amino acid alterations in mutants of aspartate transcarbamoylase: Structural aspects of interallelic complementation.

Recent genetic studies of the pyrB locus of Escherichia coli resulted in the characterization of 29 mutant strains harboring defects in the structural gene that encodes the catalytic chains of aspartate transcarbamoylase (carbamoylphosphate: L-aspartate carbamoyltransferase, EC 2.1.3.2). Three alleles, pyrB554, pyrB730, and pyrB748, have been cloned, and their nucleotide sequences have been determined along with that of the wild-type pyrBI operon in order to locate the sites of the alterations in the catalytic chains. Missense mutation pyrB554 leads to replacement of serine-52 by phenylalanine, and the inactive mutant enzyme has properties similar to those of wild-type aspartate transcarbamoylase. The amber mutation pyrB730 results in unstable truncated polypeptide chains 27 amino acids shorter than wild-type chains. Deletion mutation pyrB748 causes the removal of 181 amino acids. Combining these results with knowledge of the crystallographic structure of the wild-type enzyme provides a basis for tentative structural mechanisms for the observed complementation behavior of the mutant proteins.

Genetic characterization of the folding domains of the catalytic chains in aspartate transcarbamoylase.

In Salmonella typhimurium strains which produce high constitutive levels of aspartate transcarbamoylase due to the pyrH700 mutation, the bulk of the carbamoyl phosphate of the cell is consumed for the biosynthesis of pyrimidines. As a consequence, there is little substrate available for arginine synthesis and the cell growth is impeded. Suppression of arginine auxotrophy by mutations which block aspartate transcarbamoylase activity provides a positive selection technique for mutant strains defective in this enzyme activity. A genetic analysis was performed on 29 mutant strains harboring defects in the structural gene pyrB, encoding the catalytic chains of aspartate transcarbamoylase of Escherichia coli. Extracts from 15 strains contained intact, inactive enzyme-like molecules of the same size as the purified wild type enzyme. These same extracts contained a predominant polypeptide chain which migrated electrophoretically at the same rate as catalytic chains from wild type enzyme. In addition to these 15 different missense mutants, 14 others (presumably chain-terminating mutants) were isolated; no polypeptides corresponding to full length catalytic chains were detected in these strains. Based on their reversion and suppression properties, seven were designated as frameshift and two as amber nonsense. A fine structure recombination map of the pyrB locus was constructed from a series of three-factor transductional crosses. Mutational sites were correlated with regions in the polypeptide sequence by relating their map positions to that of mutation pyrB231 which results in an amino acid replacement at position 128. Moreover, since recent crystallographic studies indicate that residue 128 is located near the junction between the NH2- and COOH-terminal folding domains, the mutational sites can be placed within either of these two regions of tertiary structure. Interallelic complementation experiments showed four units of complementation. Those defining the alpha and beta units were missense mutants with their mutational sites in the NH2- and COOH-terminal domains, respectively. The mutants determining the delta and gamma units involved premature polypeptide chain termination and their mutational sites were correlated with distal regions of the two respective domains. Several mutants of the chain-terminating type failed to complement members of more than one unit. Possible effects of the various mutations and their implications for mechanisms of complementation and enzyme activity are presented.

Propagation of conformational changes in Ni(II)-substituted aspartate transcarbamoylase: effect of active-site ligands on the regulatory chains.

Although the importance of ligand-promoted conformational changes in allosteric enzymes has been recognized, it often has been difficult to determine whether the effects of binding are propagated to remote positions in different chains. Efforts were made, therefore, to demonstrate that changes due to ligand binding to the catalytic chains of aspartate transcarbamoylase (carbamoylphosphate:L-aspartate carbamoyltransferase, EC 2.1.3.2) of Escherichia coli are "communicated" to the regulatory chains. For these studies the endogenous zinc in the latter chains was replaced by nickel, which served as a discriminating spectral probe. The Ni(II)-enzyme was constructed by dissociating the native enzyme, separating the catalytic and regulatory subunits, removing Zn(II) from the latter, replacing it with Ni(II), and reconstituting the enzyme from native catalytic and Ni(II)-containing regulatory subunits. Ni(II) derivatives containing either six Ni(II) or five Ni(II) and one Zn(II) possess the allosteric properties of the native enzyme and exhibit absorption bands at 360 and 440 nm due to charge transfer transitions. Smaller bands were also observed at 665 and 720 nm from d-d transitions, which are consistent with tetrahedral geometry in the coordination sphere of nickel. Binding of the bisubstrate ligand N-(phosphonacetyl)-L-aspartate to the catalytic subunit of Ni(II)-aspartate transcarbamoylase perturbed the Ni(II) chromophore, giving rise to two difference spectral bands (at 390 and 465 nm). Spectral titrations showed that the conformational changes at the metal-ion-binding sites were complete even though about one-third of the active sites were unoccupied. This propagation of conformational changes is in accord with other evidence indicating that the allosteric transition in aspartate transcarbamoylase is concerted.

The thiol group in the catalytic chains of aspartate transcarbamoylase.

The allosteric enzyme aspartate transcarbamoylase (EC 2.1.3.2) was previously shown to consist of two functionally distinct types of polypeptide chains. X-ray diffraction and chemical studies showed that there are six copies of both catalytic (C) and regulatory (R) chains, and that the intact molecular complex (C(6)R(6)) has D(3) symmetry. Organomercurials react preferentially with the four thiol groups on each R chain, dissociating the molecular complex. We show that 2-chloromercuri-4-nitrophenol reacts specifically and rapidly with the single C-chain thiol, which is believed to be near the catalytic site. This reaction inactivates the enzyme in solution and does not dissociate the molecular complex. Spectrophotometric titration and mercury analysis indicates that six molecules of this mercurial are firmly bound to the enzyme (R(6)C(6)), and crystallographic studies establish that only six sites, related by D(3) symmetry, are modified. The known low reactivity of this C-chain thiol with other sulfhydryl reagents, the unusual structural requirements in the reaction with 2-chloromercuri-4-nitrophenol, and the spectral properties of the resulting derivative provide insight into the environment of this thiol. Probably, at least one positively charged group of the enzyme is nearby, and the environment of this thiol is at least partially hydrophobic.