Metathesis Catalysts Research Articles

Activation of Methyltrioxorhenium for Olefin Metathesis by a Frustrated Lewis Pair.

Methyltrioxorhenium (MTO) supported on Al2O3 or SiO2-Al2O3 is an efficient heterogeneous alkene metathesis catalyst that works at room temperature and tolerates various functional groups. Surface studies found that MTO interacts with highly Lewis-acidic aluminum centers and that its methyl group is probably C-H activated resulting in rhenium-methylidene species. The exact structure of the catalyst resting state and the active species is subject to scientific debate. Here, we report on the activation of MTO by 2,6-lutidine and tris(pentafluorophenyl)borane (B(C6F5)3), a frustrated Lewis pair (FLP) in solution. The MTO/FLP catalyst is active in ring-opening metathesis polymerization of norbornene and in cross-metathesis of internal olefins under mild conditions. ESI-MS and NMR studies found that MTO is deprotonated in the presence of the FLP to yield a rhenium-methylidene species. While this initially activated methylidene eluded detection, spraying reaction mixtures with structurally constrained olefins in ESI-MS allowed for the detection of on-cycle rhenium-alkylidene species. Time-course measurements showed that the modest catalytic activity could be attributed to a rapid catalyst deactivation step. One possible deactivation pathway was identified to be a second deprotonation step of the metathesis-active methylidene, yielding a rhenium-methylidyne. Kinetic experiments have shown that it can be reactivated for olefin metathesis by protonation in solution. Additionally, several irreversible catalyst deactivation pathways leading to permanently deactivated catalyst species are hypothesized. We propose that the MTO/FLP system constitutes a homogeneous model system for the heterogeneous MTO catalysts.

Amino Imidazoline-2-imine-Chelated Triel Carbenoids as Ligands for Ruthenium Complexes: DFT Studies on Their Activity as Potential Olefin Metathesis Catalysts

Amino Imidazoline-2-imine-Chelated Triel Carbenoids as Ligands for Ruthenium Complexes: DFT Studies on Their Activity as Potential Olefin Metathesis Catalysts

The Role of Spacer Length in Macrocyclization Reactions Under Confinement

AbstractWe studied the influence of the distance of olefin metathesis catalysts from the inner surface of a mesoporous support on macrocyclization and Z‐selectivity under confinement. For these purposes, the cationic molybdenum imido alkylidene N‐heterocyclic carbene (NHC) catalysts [Mo(N‐(2‐tBu‐C6H4)(1‐mesityl‐3‐(3‐trimethoxysilylprop‐1‐yl)‐imidazol‐2‐ylidene)(CHCMe2Ph)(MeCN)Br+ B(ArF)4−] Mo2, [Mo(N‐(2‐tBu‐C6H4)(1‐mesityl‐3‐(3‐trimethoxysilylprop‐1‐yl)‐imidazol‐2‐ylidene)(CHCMe2Ph)(MeCN)OTf+ B(ArF)4−] Mo3, [Mo(N‐(2,6‐Me2‐C6H3)(1‐mesityl‐3‐(3‐trimethoxysilylprop‐1‐yl)‐imidazol‐2‐ylidene)(CHCMe2Ph)(MeCN)Br+ B(ArF)4−] Mo5, and [Mo(N‐(2,6‐iPr2‐C6H3)(1‐mesityl‐3‐(3‐trimethoxysilylprop‐1‐yl)‐imidazol‐2‐ylidene)(CHCMe2Ph)(MeCN)+Br B(ArF)4−] Mo7 (B(ArF)4 = tetrakis[3,5‐bis(trifluoromethyl)phenyl]borate), all containing a trimethoxysilylpropyl tether, were selectively immobilized inside the mesopores of SBA‐15. Under confinement, both macro(mono)cyclization (MMC) and Z‐selectivity were higher than in solution but lower than with catalysts directly bound to the surface of the mesoporous supports. These findings are in agreement with existing theoretical models on substrate and product distribution in mesopores, which suggest that the highest substrate concentration is found at the pore wall and that it increases with decreasing pore diameter.

High Molecular Weight Semicrystalline Substituted Polycyclohexene From Alternating Copolymerization of Butadiene and Methacrylate and Its Ambient Depolymerization.

Cyclohexene cannot be polymerized via ring-opening polymerization under any conditions due to its lack of ring strain. A hypothetical polycyclohexene would therefore have a strong thermodynamic driving force to depolymerize to monomer if a metathesis catalyst were provided while otherwise having thermal and hydrolytic stability under normal conditions because of its hydrocarbon backbone. We envisioned access to this otherwise unattainable family of polymers via the alternating polymerization of a diene and an alkene. Ethyl aluminum chloride was found to promote highly alternating polymerization of butadiene and methacrylate when radically initiated at room temperature, resulting in formal polycyclohexene structures. Ultrahigh molecular weight (up to 1750 kDa) polymers can be synthesized at the decagram scale in high monomer conversions. The resulting presumably atactic copolymers exhibited semicrystallinity, leading to high toughness. In the presence of a small amount of the Grubbs catalyst, the generated polycyclohexene can be fully depolymerized at ambient temperatures into pure constituent cyclohexene. The strategy of using orthogonal chemistry for the polymerization and depolymerization processes allows access to polymer structures with subambient ceiling temperatures without using ultralow temperature synthesis or relying on the monomer-polymer equilibrium.

Hocheffizienter Niedrigbeladener PdOx/AlSiOx‐Katalysator für die Ethylen‐Dimerisierung

AbstractDie Ethylen‐Dimerisierung ist ein industrieller Prozess, der derzeit mit homogenen Katalysatoren durchgeführt wird. Hier stellen wir einen hochaktiven heterogenen Katalysator vor, der winzige Mengen von atomar dispergiertem Pd enthält. Er erfordert keine Cokatalysatoren oder Aktivatoren und übertrifft die Leistung früherer Katalysatoren, die unter ähnlichen Reaktionsbedingungen getestet wurden. Die Selektivität für C4‐ und C6‐Kohlenwasserstoffe betrug bei 200 °C etwa 80 % bzw. 10 % bei 42 % C2H4‐Umsatz unter Verwendung eines industriell relevanten Reaktionsgemisches mit 50 Vol.‐% Ethylen. Unsere Experimente zur Kinetik und Katalysatorcharakterisierung, ergänzt durch Dichtefunktionaltheorie‐Berechnungen, liefern molekulare Einblicke in die lokale Umgebung isolierter Pd(II)Ox‐Spezies und ihre Rolle bei der Erzielung einer hohen Aktivität in der Zielreaktion. Als der entwickelte Katalysator rationell mit einem Mo‐haltigen Olefinmetathesekatalysator im gleichen Reaktor integriert wurde, reagierten die gebildeten Butene mit Ethylen zu Propylen mit einer Selektivität von 98 % bei etwa 24 % C2H4‐Umsatz.

Highly Efficient Low-loaded PdOx/AlSiOx Catalyst for Ethylene Dimerization.

Ethylene dimerization is an industrial process that is currently carried out using homogeneous catalysts. Here we present a highly active heterogeneous catalyst containing minute amounts of atomically dispersed Pd. It requires no co-catalyst(s) or activator(s) and significantly outperforms previously reported catalysts tested under similar reaction conditions. The selectivity to C4- and C6-hydrocarbons was about 80 % and 10 % at 42 % ethylene conversion at 200 °C using an industrially relevant feed containing 50 vol % ethylene, respectively. Our kinetic and catalyst characterization experiments complemented by density functional theory calculations provide molecular insights into the local environment of isolated Pd(II)Ox species and their role in achieving high activity in the target reaction. When the developed catalyst was rationally integrated with a Mo-containing olefin metathesis catalyst in the same reactor, the formed butenes reacted with ethylene to propylene with a selectivity of 98 % at about 24 % ethylene conversion.

Anionic Olefin Metathesis Catalysts Enable Modification of Unprotected Biomolecules in Water.

Stability problems have limited the uptake of cationic olefin metathesis catalysts in chemical biology. Described herein are anionic catalysts that improve water-solubility, robustness, and compatibility with biomolecules such as DNA. A sulfonate tag is installed on the cyclic (alkyl)(amino) carbene (CAAC) ligand platform, chosen for resistance to degradation by nucleophiles, base, water, and β-elimination. Hoveyda-Grubbs catalysts bearing the sulfonated CAAC ligands deliver record productivity in metathesis of unprotected carbohydrates and nucleosides at neutral pH. Decomposed catalyst has negligible impact on metathesis selectivity, whereas N-heterocyclic carbene (NHC) catalysts degrade rapidly in water and cause extensive C=C migration.

A high-performance liquid Ru-based metathesis catalyst for the ring-opening metathesis polymerization of dicyclopentadiene

A high-performance liquid Ru-based metathesis catalyst for the ring-opening metathesis polymerization of dicyclopentadiene

Synthesis and Application of Robust Spiro [Fluorene-9] CAAC Ruthenium Alkylidene Complexes for the "One-Pot" Conversion of Allyl Acetate to Butane-1,4-diol.

A series of a novel CAAC ligands featuring a spiro-fluorene group have been synthesized and complexed with ruthenium alkylidenes, yielding the corresponding Hoveyda-type derivatives as a new family of olefin metathesis catalysts. The novel complexes have been characterized by XRD, HRMS and NMR measurements. The synthetised complexes were tested in catalysis and showed good activity in olefin metathesis, as demonstrated on diethyl diallylmalonate and allyl acetate substrates. The unique backbone in the ligand with the large, yet inflexible condensed system renders interesting properties to the catalyst, exemplified by the good catalytic performance and improved Z-selectivity. In addition, the complex can also serve as a hydrogenation catalyst in a consecutive (one-pot) reaction. The latter reaction can convert allyl acetate to butane-1,4-diol, a valuable chemical intermediate for biodegradable polybutylene succinate (PBS).

Reprocessability in Engineering Thermosets Achieved Through Frontal Ring-Opening Metathesis Polymerization.

While valued for their durability and exceptional performance, crosslinked thermosets are challenging to recycle and reuse. Here, inherent reprocessability in industrially relevant polyolefin thermosets is unveiled. Unlike prior methods, this approach eliminates the need to introduce exchangeable functionality to regenerate the material, relying instead on preserving the activity of the metathesis catalyst employed in the curing reaction. Frontal ring-opening metathesis polymerization (FROMP) proves critical to preserving this activity. Conditions controlling catalytic viability are explored to successfully reclaim performance across multiple generations of material, thus demonstrating long-term reprocessability. This straightforward and scalable remolding strategy is poised for widespread adoption. Given the anticipated growth in polyolefin thermosets, these findings represent an important conceptual advance in the pursuit of a fully circular lifecycle for thermoset polymers.

Revisiting the Potential of Group VI Inorganic Precatalysts for the Ethenolysis of Fatty Acids through a Mechanochemical Approach.

The utilization of biobased feedstocks to prepare useful compounds is a pivotal trend in current chemical research. Among a varied portfolio of naturally available starting materials, fatty acids are abundant, versatile substrates with multiple applications. In this context, the ethenolysis of unsaturated fatty acid esters such as methyl oleate is an atom-economical way to prepare functional C10 olefins with a biobased footprint. Despite the existence of a variety of metathesis catalysts for the latter process, there is a lack of readily available, efficient, and inexpensive catalytic systems based on earth-abundant metals (Mo, W) whose preparation does not require sophisticated syntheses and manipulations. Here, a systematic exploration of homogeneous and heterogeneous inorganic Mo, W (oxy)halides shows that MoOCl4, while inactive as a homogeneous species, forms active and selective silica-supported ethenolysis precatalysts able to reach equilibrium conversion of methyl oleate within a few minutes upon activation with SnMe4. Such heterogeneous MoOCl4-based precatalysts were easily accessed through mechanochemical solvent-free procedures and found to contain, upon characterization by elemental analysis and Raman spectroscopy, isolated (≡SiO)Mo(=O)Cl3 units or polymeric silica-supported [-O(≡SiO)nMoCl4-nO-]m (n = 1, 2) complexes depending on the molybdenum loading. The former isolated species exhibited a higher catalytic performance. The developed heterogeneous precatalysts could be applied to the ethenolysis of various substrates, including polyunsaturated fatty acid esters and industrial fatty acid methyl ester (FAME) mixtures from palm oil transesterification.

PhotoROMP: The Future Is Bright.

Since the earliest investigations of olefin metathesis catalysis, light has been the choice for controlling the catalyst activity on demand. From the perspective of energy efficiency, temporal and spatial control, and selectivity, photochemistry is not only an attractive alternative to traditional thermal manufacturing techniques but also arguably a superior manifold for advanced applications like additive manufacturing (AM). In the last three decades, pioneering work in the field of ring-opening metathesis polymerization (ROMP) has broadened the scope of material properties achievable through AM, particularly using light as both an activating and deactivating stimulus. In this Perspective, we explore trends in photocontrolled ROMP systems with an emphasis on approaches to photoinduced activation and deactivation of metathesis catalysts. Recent work has yielded a myriad of commercial and synthetically accessible photosensitive catalyst systems, although comparatively little attention has been paid to achieving precise control over polymer morphology using light. Metal-free, photophysical, and living ROMP systems have also been relatively underexplored. To take fuller advantage of both the thermomechanical properties of ROMP polymers and the operational simplicity of photocontrol, clear directions for the field are to improve the reversibility of activation and deactivation strategies as well as to further develop photocontrolled approaches to tuning cross-link density and polymer tacticity.

Cross-Linked Polyolefins through Tandem ROMP/Hydrogenation.

Cross-linked polyolefins have important advantages over their thermoplastic analogues, particularly improved impact strength and abrasion resistance, as well as increased chemical and thermal stability; however, most strategies for their production involve postpolymerization cross-linking of polyolefin chains. Here, a tandem ring-opening metathesis polymerization (ROMP)/hydrogenation approach is presented. Cyclooctene (COE)-co-dicyclopentadiene (DCPD) networks are first synthesized using ROMP, after which the dispersed Ru metathesis catalyst is activated for hydrogenation through the addition of hydrogen gas. The reaction temperature for hydrogenation must be sufficiently high to allow mobility within the system, as dictated by thermal transitions (i.e., glass and melting transitions) of the polymeric matrix. COE-rich materials exhibit branched-polyethylene-like crystallinity (25% crystallinity) and melting points (Tm = 107 °C), as well as excellent ductility (>750% extension), while majority DCPD materials are glassy (Tg = 84 °C) and much stiffer (E = 710 MPa); all materials exhibit high tensile toughness. Importantly, hydrogenation of olefins in these cross-linked materials leads to notable improvements in oxidative stability, as saturated networks do not experience the same substantial degradation of mechanical performance as their unsaturated counterparts upon prolonged exposure to air.

Is Mn(I) More Promising Than Fe(II)-A Comparison of Mn vs Fe Complexes for Olefin Metathesis.

Olefin metathesis is one of the most significant transformations in organic chemistry and is an excellent example for efficient homogeneous catalysis. Although most currently used catalysts are primarily based on 4d and 5d metals, cycloaddition and cycloreversion reactions can also be attributed to first-row transition metals, such as Fe. Surprisingly, the potential of Mn(I)-based catalysts for olefin metathesis has been unexplored despite their prominence in homogeneous catalysis and their diagonal relationship to Ru(II). In the present study, we have investigated the prospective capabilities of Mn complexes for cycloaddition and reversion reactions using density functional theory. Therefore, we have initially compared the literature known iron model systems and their isoelectronic Mn counterparts regarding their reactivity and electronic structure. Next, we constructed potential Mn complexes derived from synthetically accessible species, including carbonyl ligands and obeying octahedral geometry. Based on thermodynamic parameters and the calculation of electronic descriptors, we were able to validate the isodiagonal relationship. Our study serves as guidance for the experimental chemist.

Automated de Novo Design of Olefin Metathesis Catalysts: Computational and Experimental Analysis of a Simple Thermodynamic Design Criterion.

Methods for computational de novo design of inorganic molecules have paved the way for automated design of homogeneous catalysts. Such studies have so far relied on correlation-based prediction models as fitness functions (figures of merit), but the soundness of these approaches has yet to be tested by experimental verification of de novo-designed catalysts. Here, a previously developed criterion for the optimization of dative ligands L in ruthenium-based olefin metathesis catalysts RuCl2(L)(L')(═CHAr), where Ar is an aryl group and L' is a phosphine ligand dissociating to activate the catalyst, was used in de novo design experiments. These experiments predicted catalysts bearing an N-heterocyclic carbene (L = 9) substituted by two N-bound mesityls and two tert-butyl groups at the imidazolidin-2-ylidene backbone to be promising. Whereas the phosphine-stabilized precursor assumed by the prediction model could not be made, a pyridine-stabilized ruthenium alkylidene complex (17) bearing carbene 9 was less active than a known leading pyridine-stabilized Grubbs-type catalyst (18, L = H2IMes). A density functional theory-based analysis showed that the unsubstituted metallacyclobutane (MCB) intermediate generated in the presence of ethylene is the likely resting state of both 17 and 18. Whereas the design criterion via its correlation between the stability of the MCB and the rate-determining barrier indeed seeks to stabilize the MCB, it relies on RuCl2(L)(L')(═CH2) adducts as resting states. The change in resting state explains the discrepancy between the prediction and the actual performance of catalyst 17. To avoid such discrepancies and better address the multifaceted challenges of predicting catalytic performance, future de novo catalyst design studies should explore and test design criteria incorporating information from more than a single relative energy or intermediate.

Comparison of SiO2-supported molybdena, tungsta and rhenia catalysts for olefin metathesis

The characteristics of supported MOx/SiO2 catalysts (M = Re, Mo, W) for olefin metathesis were compared side-by-side to understand the differences among these catalyst systems.

A bioinspired bifunctional catalyst: an amphiphilic organometallic catalyst for ring-closing metathesis forming liquid droplets in aqueous media.

Inspired by phase-separated biopolymers with enzymatic activity, we developed an amphiphilic catalyst consisting of alternating hydrophilic oligo(ethylene glycol) and hydrophobic aromatic units bearing a Hoveyda-Grubbs catalyst center (MAHGII). MAHGII served as both a droplet-forming scaffold and a catalyst for ring-closing metathesis reactions, providing a new biomimetic system that promotes organic reactions in an aqueous environment.

From trials on rosuvastatin production waste valorization to development of new catalytic methods for Z → E isomerization of alkenes

A convenient method for Z → E geometry isomerization of aryl–aryl (stilbenes), alkyl–aryl, and alkyl–alkyl alkenes was developed.

Exploring efficient and air-stable d2 Re(v) alkylidyne catalysts: toward room temperature alkyne metathesis.

Transition metal-catalyzed alkyne metathesis has become a useful tool in synthetic chemistry. Well-defined alkyne metathesis catalysts comprise alkylidyne complexes of tungsten, molybdenum and rhenium. Non-d0 Re(v) alkylidyne catalysts exhibit advantages such as remarkable tolerance to air and moisture as well as excellent functional group compatibility. However, the known Re(v) alkylidynes with a pyridine leaving ligand require harsh conditions for activation, resulting in lower catalytic efficiency compared to d0 Mo(vi) and W(vi) alkylidynes. Herein, we report the first non-d0 alkylidyne complex capable of mediating alkyne metathesis at room temperature, namely, the Re(v) aqua alkylidyne complex Re([triple bond, length as m-dash]CCH2Ph)( Ph PO)2(H2O) (14). The aqua complex readily dissociates a water ligand in solution, confirmed by ligand substitution reactions with other σ-donor ligands. The aqua complex can be readily prepared on a large scale, and is stable to air and moisture in the solid state and compatible with a variety of functional groups. The versatile ability of the catalyst has been demonstrated through examples of alkyne cross-metathesis (ACM), ring-closing alkyne metathesis (RCAM), and acyclic diyne metathesis macrocyclization (ADIMAC) reactions. All in all, this work presents a solution for an efficient and air-stable alkyne metathesis catalytic system based on d2 Re(v)-alkylidynes.

Photoinitiated thermoset polymerization through controlled release of metathesis catalysts encapsulated in poly(phthalaldehyde)

Frontal polymerization of dicyclopentadiene initiated by UV-degradable catalyst microparticles with excellent resin stability and tenability.