Catalytic Performance Research Articles

Near-Barrierless CO Oxidation Using Phosphotungstic Acid-Supported Single-Atom Catalysts.

Efficient CO oxidation at ambient or low temperatures is essential for environmental purification and selective CO oxidation in H2, yet achieving this remains a challenge with current methodologies. In this research, we extensively evaluated the catalytic performance of phosphotungstic acid (PTA)-supported 11 M1/PTA single-atom catalysts (SACs) using density functional theory calculations across both gas phase and 12 common solvents. The Rh1/PTA, Pd1/PTA, and Pt1/PTA systems exhibit moderate CO adsorption energies, facilitating the feasibility of oxygen vacancy formation. Remarkably, the Pd1/PTA and Pt1/PTA catalysts exhibited negligible energy barriers and demonstrated exceptionally high catalytic rates, with values reaching up to (1 × 1010)11, markedly exceeding the threshold for room temperature reactions, set at 6.55 × 108. This phenomenon is attributed to a transition from the high-energy barrier processes of oxygen dissociation in O2 and N-O bond dissociation in N2O to the more efficient dissociation of H2O2. Orbital analysis and charge variations at metal sites throughout the reaction process provide deeper insights into the role of the three metal catalytic sites in CO activation. Our findings not only reveal key aspects of SACs in facilitating CO oxidation at low temperatures but also provide valuable insights for future catalytic reaction mechanism studies and environmental applications.

One-pot conversion of xylose to 1,2-pentanediol catalyzed by an organic acid-assisted Pt/NC in aqueous phase.

The direct synthesis of 1,2-pentanediol (1,2-PeD) from renewable xylose and its derivatives derived from hemicellulose is appealing yet challenging due to its low selectivity for the target product. In this study, one-pot catalytic conversion of xylose to 1,2-PeD was performed by using nitrogen-doped carbon (NC) supported Pt catalysts with the assistance of organic acids. A remarkable yield of 49.3% for 1,2-PeD was achieved by reacting 0.1869 g xylose in 30 mL water at 200 °C under a hydrogen pressure of 3 MPa for 8 h in the presence of 0.1 g of 2.5Pt/NC600 catalyst and 0.1869 g propanoic acid co-catalyst. The presence of vicinal Pt-acid pair sites on the surface of the 2.5Pt/NC600 catalyst exhibited a synergistic effect in promoting the hydrogenation of furfural to furfuryl alcohol intermediate and subsequent hydrogenation and ring-opening reactions leading to the formation of 1,2-PeD. The addition of organic acids, may serve as both acid catalyst for dehydration of xylose and hydrogen donor for hydrogenation of furfural and furfuryl alcohol, thereby promoting the one-pot conversion of xylose to 1,2-PeD. Remarkably, the 2.5Pt/NC600 catalyst demonstrated outstanding catalytic performance and good reusability over five consecutive cycles without significant deactivation.

Photoinduced Ordered Growth of Copper-Doped Polyaniline Nanotubes: A Method to Improve the Catalytic Activity for C-N Coupling Reactions.

Polyaniline-supported metal nanoparticles (M@PANIs) have been widely employed as catalysts for organic reactions. Traditionally, the catalytic activities of the materials can be improved by introducing functional groups onto the aniline monomers, but it may enhance the catalyst cost and reduce the production yield of the material. This work reports a new strategy for improving the catalytic activity of M@PANIs. It was found that induced by visible light in the presence of a polymeric carbon nitride catalyst and copper dopant, the oxidative polymerization of simple aniline occurred slowly and orderly to produce the copper-doped polyaniline nanotubes. The unique tubular structure protected the catalytically active Cu(I) inside and endowed even more sufficient contact of the catalytic sites with reactants so that the material exhibited excellent catalytic performances in C-N coupling reactions.

Understanding and Harnessing Nanoscale Immiscibility in Ru-In Alloys for Selective CO2 Hydrogenation.

Bimetallic alloys made from immiscible elements are characterized by their tendency to segregate on the macroscopic scale, but their behavior is known to change at the nanoscale. Here, we demonstrate that in the Ru-In system, In atoms preferentially decorate the surface of 6 nm Ru nanoparticles, forming Ru-In superficial immiscible alloys. This surface decoration dramatically affects the catalytic performance of the system, even at small atomic fractions of In added to Ru. The interfaces between Ru and In enabled unexplored methanol productivity from CO2 hydrogenation, which outperformed not only the individual constituents but also ordered RuIn3 intermetallic alloys. Our work highlights that the formation of superficial immiscible alloys could offer new insights into the understanding and design of heterogeneous catalysts.

Structure evolution and specific effects for the catalysis of atomically ordered intermetallic compounds.

Atomically ordered intermetallic compounds (IMCs) have been extensively studied for exploring catalysts with high activity, selectivity, and longevity. Compared to random alloys, IMCs present a more pronounced geometric and electronic effect with desirable catalytic performance. Their well-defined structure makes IMCs ideal model catalysts for studying the catalytic mechanism. This review focuses especially on elemental composition, electron transfer, and structure/phase evolution under high temperature treatment conditions, providing direct evidence for the migration and rearrangement of metal atoms through electron microscopy. We then present the outstanding applications of IMCs in growing single-walled nanotubes, hydrogenation/dehydrogenation reactions, and electrocatalysis from the perspective of electronic, geometric, strain, and bifunctional effects of ordered IMCs. Finally, the current obstacles associated with the use of in situ techniques are proposed, as well as future research possibilities.

Creating Asymmetric Fe-N3C-N Sites in Single-Atom Catalysts Boosts Catalytic Performance for Oxygen Reduction Reaction.

Fine tuning of the metal site coordination environment of a single-atom catalyst (SAC) to boost its catalytic activity for oxygen reduction reaction (ORR) is of significance but challenging. Herein, we report a new SAC bearing Fe-N3C-N sites with asymmetric in-plane coordinated Fe-N3C and axial coordinated N atom for ORR, which was obtained by pyrolysis of an iron isoporphyrin on polyvinylimidazole (PVI) coated carbon black. The C@PVI-(NCTPP)Fe-800 catalyst exhibited significantly improved ORR activity (E1/2 = 0.89 V vs RHE) than the counterpart SAC with Fe-N4-N sites in 0.1 M KOH. Significantly, the Zn-air batteries equipped with the C@PVI-(NCTPP)Fe-800 catalyst demonstrated an open-circuit voltage (OCV) of 1.45 V and a peak power density (Pmax) of 130 mW/cm2, outperforming the commercial Pt/C catalyst (OCV = 1.42 V; Pmax = 119 mW/cm2). The density functional theory (DFT) calculations revealed that the d-band center of the asymmetric Fe-N3C-N structure shifted upward, which enhances its electron-donating ability, favors O2 adsorption, and supports O-O bond activation, thus leading to significantly promoted catalytic activity. This research presents an intriguing strategy for the designing of the active site architecture in metal SACs with a structure-function controlled approach, significantly enhancing their catalytic efficiency for the ORR and offering promising prospects in energy-conversion technologies.

The recent progress of single-atom catalysts on amorphous substrates for electrocatalysis

Single-atom catalysts (SACs) have emerged as a focal point in energy catalytic conversion due to their remarkable atomic efficiency and catalytic performance. The challenge lies in efficiently anchoring active sites on a specific substrate to prevent agglomeration, maximizing their effectiveness. Substrate characteristics play a pivotal role in shaping the catalytic performance of SACs, influencing the dispersion and stability of single atoms. In recent years, amorphous materials have gained attention as substrates due to their unique surface structure and abundance of unsaturated coordination sites, offering an ideal platform for capturing and anchoring single atoms effectively, thus enhancing catalytic activity. To clarify the interaction between single atoms and amorphous substrates, this review outlines amorphization methods, the mechanism of single-atom anchoring and the characterization methods of amorphous SACs. Subsequently, it summarizes the physical properties and electrocatalytic mechanisms of amorphous materials. Then, interactions between single atoms and amorphous substrates are categorized and summarized. Finally, the paper consolidates the research progress of amorphous SACs and outlines future development prospects. By exploring the synergistic relationship between single atoms and amorphous substrates, this review aims to deepen the understanding of their interaction mechanisms, thereby propelling advancements in SACs for energy catalytic conversion.

Direct oxidation of alcohols to carboxylic acids using simple and economical Pd@Glu-HTC catalyst: Practical and scalable approach towards biomass based value added chemicals

Sustainable catalytic transformation of bio-based alcohols to high value-added fine chemicals is an important topic of research. This work described preparation of simple and economical Pd@Glu-HTC catalyst from biomass derived low cost d-glucose. Hydrothermal carbonization of glucose was carried out in first step to synthesize Glu-HTC support in a simpler, greener, economical and efficient manner followed by incorporation of palladium metal on surface of the catalyst in second step. The catalyst was characterized using techniques such as Fourier Transform Infrared Spectroscopy (FT-IR), Solid-state Cross-Polarization Magic Angle Spinning Carbon-13 (13C CPMAS), Energy-dispersive X-ray spectroscopy (EDAX), Powder X-ray diffraction (P-XRD), X-ray photoelectron spectroscopy (XPS), Thermogravimetric/Differential Thermal Analyzer (TG-DTA), Field emission scanning electron microscopy (FE-SEM) and High-resolution transmission electron microscopy (HR-TEM). The catalyst was evaluated for direct oxidation of alcohols to yield carboxylic acids and exhibited very good catalytic activity for wider substrate scope. Oxidation of alcohols was carried out using milder base, molecular oxygen and water as a solvent to achieve 92–99 % excellent yields. The practical utility of current strategy was also studied for gram scale synthesis of bio-based value added industrially important chemicals such as furoic acid (flavouring agent and preservative in industry), 2, 5-furan-dicarboxylic acid (monomer to 100 % fossil-free, recyclable polymer polyethylene furanoate (PEF), tetrahydro-2-furoic acid (production of many drugs) and vanillin (important product of flavor and fragrance industry). Pd@Glu-HTC catalyst was found to be reusable for four recycles and the catalytic performance was retained without any loss in its activity after four cycles.

Hierarchical metal–organic framework nanoarchitectures for catalysis

Metal–organic frameworks (MOFs) have garnered significant attention in the field of catalysis due to their unique advantages such as diverse coordination geometry, variable metal nodes, and organic linkers, facilitating precise structural and compositional control for achieving programmable catalytic functionalities. Although their inherent microporous structure could provide excellent shape selectivity during catalysis, it typically impedes the mass transfer process, thereby reducing the use of internal active sites and overall catalytic efficiency. Additionally, employing single MOFs as catalysts presents challenges in achieving complex catalytic reactions that require multifunctional active sites. In recent years, considerable research efforts have focused on designing and constructing hierarchical nanostructured MOFs to alleviate substrate diffusion limitations by introducing secondary nanopores, shortening diffusion distances via the construction of low-dimensional nanoarchitectures, and constructing multifunctional catalysts by integrating distinct MOFs with suitable functions. This review provides a comprehensive overview of the design, synthesis methods, and formation mechanisms of MOF-based hierarchical nanostructures in recent years. Subsequently, it further highlights their applications in thermal catalysis, electrocatalysis, and photocatalysis, along with the relationship between their hierarchical nanostructures and catalytic performances. Finally, it provides an outlook on the challenges and potential development directions of hierarchically structured MOF nanocatalysts.

P-Diarylboryl Halothiophenols as Multifunctional Catalysts via Photoactive Intramolecular Frustrated Lewis Pairs.

p-Diarylboryl halothiophenols are developed and unequivocally characterized. Their photophysical properties and catalytic performance are unveiled by experimental and theoretical investigations. This novel class of triarylboranes behaves as a Brønsted acid to generate the corresponding borylthiophenolate that can absorb visible light to undergo intramolecular charge transfer to form a radical pair consisting of a boron radical anion and thiyl radical, which acts as a single-electron reductant while engaging in hydrogen atom transfer to regenerate the parent borylthiophenol. The synthetic relevance of this mode of action is demonstrated by the establishment of unique catalysis that integrates three different yet tunable functions in a single catalytic cycle, thereby allowing borylthiophenols to solely promote the assembly of sterically congested 1,2-diols and 1,2-aminoalcohol derivatives via radical-radical cross-coupling.

Surface activation via selective dealloying of Cu-based metallic glasses for efficient catalytic behavior.

Surface activation is considered to regulate the electronic structures of materials for enhancing catalytic capability. Herein, we report a controllable strategy for constructing three-dimensional micro-nanoporous copper catalysts with high reactivity and activity for the degradation reaction of organic pollutants. Various micro-nanoporous structures and in situ formation processes by chemical selective dealloying of Cu-based metallic glasses are evaluated due to the surface modification. The porous catalysts exhibit superior catalytic performance, attributing to the catalytic mechanisms related to the superior surface activity of nanoscale copper composites and the strong oxidizing capability of activated radicals. These findings will provide a promising synthesis approach for three-dimensional micro-nanoporous catalysts for many chemical reactions.

Electrosynthesis of Transition Metal Coordinated Polymers for Active and Stable Oxygen Evolution.

Transition metal coordination polymers (TM-CP) are promising inexpensive and flexible electrocatalysts for oxygen evolution reaction in water electrolysis, while their facile synthesis and controllable regulation remain challenging. Here we report an anodic oxidation-electrodeposition strategy for the growth of TM-CP (TM = Fe, Co, Ni, Cr, Mn; CP = polyaniline, polypyrrole) films on a variety of metal substrates that act as both catalyst supports and metal ion sources. An exemplified bimetallic NiFe-polypyrrole (NiFe-PPy) features superior mechanical stability in friction and exhibits high activity with long-term durability in alkaline seawater (over 2000 h) and anion exchange membrane electrolyzer devices at current density of 500 mA cm-2. Spectroscopic and microscopic analysis unravels the configurations with atomically distributed metal sites induced by d-π conjugation, which transforms into a mosaic structure with NiFe (oxy)hydroxides embedded in PPy matrix during oxygen evolution. The superior catalytic performance is ascribed to the anchoring effect of PPy that inhibits the metal dissolution, the strong substrate-to-catalyst interaction that ensures good adhesion, and the Fe/Ni-N coordination that modulates the electronic structures to facilitate the deprotonation of *OOH intermediate. This work provides a general strategy and mechanistic insight into building robust inorganic/polymer composite electrodes for oxygen electrocatalysis.

Electrosynthesis of Transition Metal Coordinated Polymers for Active and Stable Oxygen Evolution

Transition metal coordination polymers (TM‐CP) are promising inexpensive and flexible electrocatalysts for oxygen evolution reaction in water electrolysis, while their facile synthesis and controllable regulation remain challenging. Here we report an anodic oxidation‐electrodeposition strategy for the growth of TM‐CP (TM = Fe, Co, Ni, Cr, Mn; CP = polyaniline, polypyrrole) films on a variety of metal substrates that act as both catalyst supports and metal ion sources. An exemplified bimetallic NiFe‐polypyrrole (NiFe‐PPy) features superior mechanical stability in friction and exhibits high activity with long‐term durability in alkaline seawater (over 2000 h) and anion exchange membrane electrolyzer devices at current density of 500 mA cm−2. Spectroscopic and microscopic analysis unravels the configurations with atomically distributed metal sites induced by d‐π conjugation, which transforms into a mosaic structure with NiFe (oxy)hydroxides embedded in PPy matrix during oxygen evolution. The superior catalytic performance is ascribed to the anchoring effect of PPy that inhibits the metal dissolution, the strong substrate‐to‐catalyst interaction that ensures good adhesion, and the Fe/Ni−N coordination that modulates the electronic structures to facilitate the deprotonation of *OOH intermediate. This work provides a general strategy and mechanistic insight into building robust inorganic/polymer composite electrodes for oxygen electrocatalysis.

Halogen Tailoring of Platinum Electrocatalyst with High CO Tolerance for Methanol Oxidation Reaction

The catalytic activity of platinum for the CO oxidation depends on the interaction of electron donation and back‐donation at the platinum center. Here we demonstrate that the platinum bromine nanoparticles with electron‐rich properties on bromine bonded with sp‐C in graphdiyne (PtBr NPs/Br‐GDY), which is formed by bromine ligand and constitutes an electrocatalyst with a high CO‐resistant for methanol oxidation reaction (MOR). The catalyst showed peak mass activity for MOR as high as 10.4 A mgPt−1, which is 20.8 times higher than the 20% Pt/C. The catalyst also showed robust long‐term stability with slight current density decay after 100 hours at 35 mA cm−2. Structural characterization, experimental, and theoretical studies show that the electron donation from bromine makes the surface of platinum catalysts highly electron‐rich, and can strengthen the adsorption of CO as well as enhance π back‐donation of Pt to weaken the C−O bond to facilitate CO electrooxidation and enhance catalytic performance during MOR. The results highlight the importance of electron‐rich structure among active sites in Pt‐halogen catalysts and provide detailed insights into the new mechanism of CO electrooxidation to overcome CO poisoning at the Pt center on an orbital level.

Improving the ORR catalytic performance of hollow porous carbon derived from F127 assembled in ethanol-hexane mixture containing Fe3+ ion

Improving the ORR catalytic performance of hollow porous carbon derived from F127 assembled in ethanol-hexane mixture containing Fe3+ ion

Facile synthesis of silver doped manganese oxide nanocomposite with superior photocatalytic and antimicrobial activity under visible spectrum

Water pollution and antimicrobial resistance (AMR) have become two global threats; 80% of diseases and 50% of child deaths are due to poor water quality. In this study, hydrothermal processing was employed to manufacture manganese oxide nanorods. Silver dopant was deposited on the surface of manganese oxide. XRD diffractogram confirmed the facile synthesis of Ag/Mn2O3 nanocomposite. XPS survey analysis demonstrated silver content of 9.43 atom %. Photocatalytic measurements demonstrated the outstanding efficiency of the Ag-Mn2O3 compared to virgin oxide particles under visible radiation. Degradation efficiencies Mn2O3 and Ag/Mn2O3 on methyl orange (MO) dye was found to be 53% and 85% under visible spectrum. Silver dopant was found to decrease the binding energy of valence electrons; this action could support electron–hole pair generation under visible spectrum and could promote catalytic performance. Ag/Mn2O3 NPs demonstrated most effective performance (95% removal efficiency) at pH 3; this could be ascribed to the electrostatic attraction between positively charged catalyst and the negatively charged MO. Ag/Mn2O3 demonstrated enhanced antibacterial activity against Gram-positive Staphylococcus aureus (S. aureus) (19 mm ZOI), and Gram-negative Escherichiacoli (E. coli) (22 mm ZOI) respectively; the developed nanocomposite demonstrated advanced anti-film activity with inhibition percentage of 95.5% against E. coli followed by 89.5% against S. aureus.

Halogen Tailoring of Platinum Electrocatalyst with High CO Tolerance for Methanol Oxidation Reaction.

The catalytic activity of platinum for the CO oxidation depends on the interaction of electron donation and back-donation at the platinum center. Here we demonstrate that the platinum bromine nanoparticles with electron-rich properties on bromine bonded with sp-C in graphdiyne (PtBr NPs/Br-GDY), which is formed by bromine ligand and constitutes an electrocatalyst with a high CO-resistant for methanol oxidation reaction (MOR). The catalyst showed peak mass activity for MOR as high as 10.4 A mgPt-1, which is 20.8 times higher than the 20% Pt/C. The catalyst also showed robust long-term stability with slight current density decay after 100 hours at 35 mA cm-2. Structural characterization, experimental, and theoretical studies show that the electron donation from bromine makes the surface of platinum catalysts highly electron-rich, and can strengthen the adsorption of CO as well as enhance π back-donation of Pt to weaken the C-O bond to facilitate CO electrooxidation and enhance catalytic performance during MOR. The results highlight the importance of electron-rich structure among active sites in Pt-halogen catalysts and provide detailed insights into the new mechanism of CO electrooxidation to overcome CO poisoning at the Pt center on an orbital level.

CoMo Sulfide Catalysts Supported on Natural Halloysite Nanotubes: Dealumination as an Effective Approach to Improve Catalytic Performance

CoMo Sulfide Catalysts Supported on Natural Halloysite Nanotubes: Dealumination as an Effective Approach to Improve Catalytic Performance

Confinement-Induced Biocatalytic Activity Enhancement of Light- and Thermoresponsive Polymer@Enzyme@MOF Composites.

Metal-organic frameworks (MOFs) are favorable hosting materials for fixing enzymes to construct enzyme@MOF composites and to expand the applications of biocatalysts. However, the rigid structure of MOFs without tunable hollow voids and a confinement effect often limits their catalytic activities. Taking advantage of the smart soft polymers to overcome the limitation, herein, a protection protocol to encapsulate the enzyme in zeolitic imidazolate framework-8 (ZIF-8) was developed using a glutathione-sensitive liposome (L) as a soft template. Glucose oxidase (GOx) and horseradish peroxidase (HRP) were first anchored on a light- and thermoresponsive porous poly(styrene-maleic anhydride-N,N-dimethylaminoethyl methacrylate-spiropyran) membrane (PSMDSP) to produce PSMDSP@GOx-HRP, which could provide a confinement effect by switching the UV irradiation or varying the temperature. Afterward, embedding PSMDSP@GOx-HRP in L and encapsulating PSMDSP@GOx-HRP@L into hollow ZIF-8 (HZIF-8) to form PSMDSP@GOx-HRP@HZIF-8 composites were performed, which proceeded during the crystallization of the framework following the removal of L by adding glutathione. Impressively, the biocatalytic activity of the composites was 4.45-fold higher than that of the free enzyme under UV irradiation at 47 °C, which could benefit from the confinement effect of PSMDSP and the conformational freedom of the enzyme in HZIF-8. The proposed composites contributed to the protection of the enzyme against harsh conditions and exhibited superior stability. Furthermore, a colorimetric assay based on the composites for the detection of serum glucose was established with a linearity range of 0.05-5.0 mM, and the calculated LOD value was 0.001 mM in a cascade reaction system. This work provides a universal design idea and a versatile technique to immobilize enzymes on soft polymer membranes that can be encapsulated in porous rigid MOF-hosts. It also holds potential for the development of smart polymer@enzyme@HMOFs biocatalysts with a tunable confinement effect and high catalytic performance.

Optimal Oxophilicity at the Fe-Nx Interface Enhances the Generation of Singlet Oxygen for Efficient Fenton-Like Catalysis.

In the pursuit of efficient singlet oxygen generation in Fenton-like catalysis, the utilization of single-atom catalysts (SACs) emerges as a highly desired strategy. Here, a discovery is reported that the single-atom Fe coordinated with five N-atoms on N-doped porous carbon, denoted as Fe-N5/NC, outperform its counterparts, those coordinated with four (Fe-N4/NC) or six N-atoms (Fe-N6/NC), as well as state-of-the-art SACs comprising other transition metals. Thus, Fe-N5/NC exhibits exceptional efficacy in activating peroxymonosulfate for the degradation of organic pollutants. The coordination number of N-atoms can be readily adjusted by pyrolysis of pre-assembly structures consisting of Fe3+ and various isomers of phenylenediamine. Fe-N5/NC displayed outstanding tolerance to environmental disturbances and minimal iron leaching when incorporated into a membrane reactor. A mechanistic study reveals that the axial ligand N reduces the contribution of Fe-3d orbitals in LUMO and increases the LUMO energy of Fe-N5/NC. This, in turn, reduces the oxophilicity of the Fe center, promoting the reactivity of *OO intermediate-a pivotal step for yielding singlet oxygen and the rate-determining step. These findings unveil the significance of manipulating the oxophilicity of metal atoms in single-atom catalysis and highlight the potential to augment Fenton-like catalysis performance using Fe-SACs.