Catalytic Reaction Research Articles

Performance and Mechanism of the Modified Group Regulated the MIL-101(Fe) Type Fenton-like Catalysts.

In order to avoid the disadvantages of the Fenton process in wastewater treatment and reduce the cost of wastewater treatment, a series of MIL-101(Fe)-X (X = -OH, -NH2, -NO2, -H) solid Fenton catalysts were successfully prepared. The performance of these Fenton-like catalysts was studied with the Fenton experiment as a reference and methylene blue (MB) as an organic pollutant. The effects of the H2O2 concentration, catalyst dosage, and reaction pH on catalytic performance were systematically studied. The research had shown that the optimal concentration of H2O2 for catalytic reactions was 0.10 mmol/L and the pH was 3. At this point, their catalytic degradation MB performance was superior to the Fenton reaction and photocatalytic reaction. When the H2O2 participated in the reaction, the performance of MIL-101(Fe)-X (X = -OH, -NH2, -NO2, -H) in catalyzing the degradation of MB followed the rule of -OH > -NH2 > -NO2 > -H. This was due to the synergistic effect of Fenton-like catalysis and photocatalytic degradation in the catalytic degradation of MB. In addition, the electron paramagnetic resonance and electrospray ionization mass spectrometry showed that the hydroxyl radical (·OH) generated during the catalytic process first underwent a redox reaction with the highly electronegative functional groups in the MB molecule, and finally oxidized it to CO2 and H2O. This study successfully prepared commercially applicable Fenton-like catalysts and explored their optimal reaction conditions. This provides a technical reference for wastewater treatment.

Insertion reactions of CO2 and COS into metal-alkoxide bonds: Reactivity differences on copolymer formation with epoxides

This minireview is written to explain (speculate) upon the reasons for the dramatic differences in product distribution observed upon coupling of carbon dioxide (CO2) or carbonyl sulfide (COS) with specific epoxides under the same catalytic reaction conditions. That is, based on known results of CO2 or COS reactivities with well-defined metal-alkoxide and -phenoxide complexes, the formation of cyclic carbonates vs polycarbonates from CO2 as compared to COS is rationalized for epoxides possessing bulky substituents. This comparison concludes that although copolymers produced from CO2 and COS with epoxides are structurally similar, COS is not a good model for CO2 reactivity in these processes.

Unraveling iron oxides as abiotic catalysts of organic phosphorus recycling in soil and sediment matrices

In biogeochemical phosphorus cycling, iron oxide minerals are acknowledged as strong adsorbents of inorganic and organic phosphorus. Dephosphorylation of organic phosphorus is attributed only to biological processes, but iron oxides could also catalyze this reaction. Evidence of this abiotic catalysis has relied on monitoring products in solution, thereby ignoring iron oxides as both catalysts and adsorbents. Here we apply high-resolution mass spectrometry and X-ray absorption spectroscopy to characterize dissolved and particulate phosphorus species, respectively. In soil and sediment samples reacted with ribonucleotides, we uncover the abiotic production of particulate inorganic phosphate associated specifically with iron oxides. Reactions of various organic phosphorus compounds with the different minerals identified in the environmental samples reveal up to ten-fold greater catalytic reactivities with iron oxides than with silicate and aluminosilicate minerals. Importantly, accounting for inorganic phosphate both in solution and mineral-bound, the dephosphorylation rates of iron oxides were within reported enzymatic rates in soils. Our findings thus imply a missing abiotic axiom for organic phosphorus mineralization in phosphorus cycling.

Constructing Functional Radiation-Resistant Thorium Clusters for Catalytic Redox Reactions.

When catalytic reactions are interfered with by radiation sources, thorium clusters are promising as potential catalysts due to their superior radiation resistance. However, there is currently very little research on the design synthesis and catalytic application of radiation-stable thorium clusters. In this work, we have elaborately engineered and fabricated three high-nuclear thorium cluster catalysts denoted as Th12L3-MA12, Th12L3-MA6-BF6, and Th12L3-Fcc12, which did not undergo any significant alterations in their molecular structures and compositions after irradiation with 690 kGy γ-rays. We systematically investigated the photocatalytic/thermocatalytic properties of these radiation-resistant thorium clusters for the first time and found that γ-rays could not alter their catalytic activities. In addition, it was found that ligand engineering could modulate the catalytic activity of thorium clusters, thus expanding the range of catalytic applications of thorium clusters, including reduction reactions (nitroarene reduction) and some oxidation reactions (N-heterocyclic oxidative dehydrogenation and diphenylmethane oxidation). Meanwhile, all of these organic transformation reactions achieved a >80% conversion and nearly 100% product selectivity. Radiation experiments combined with DFT calculations showed that the synergistic catalysis of thorium-oxo core and ligands led to the generation of specific active species (H+, O2•-, or tBuO/tBuOO•) and activation of substrate molecules, thus achieving superior catalytic performance. This work is not only the first to develop radiation-resistant thorium cluster catalysts to perform efficient redox reactions but also provides design ideas for the construction of high-nuclearity thorium clusters under mild conditions.

Highly Active Oxidation Catalysts through Confining Pd Clusters on CeO2 Nano‐Islands

AbstractCeO2‐supported noble metal clusters are attractive catalytic materials for several applications. However, their atomic dispersion under oxidizing reaction conditions often leads to catalyst deactivation. In this study, the noble metal cluster formation threshold is rationally adjusted by using a mixed CeO2‐Al2O3 support. The preferential location of Pd on CeO2 islands leads to a high local surface noble metal concentration and promotes the in situ formation of small Pd clusters at a rather low noble metal loading (0.5 wt %), which are shown to be the active species for CO conversion at low temperatures. As elucidated by complementary in situ/operando techniques, the spatial separation of CeO2 islands on Al2O3 confines the mobility of Pd, preventing the full redispersion or the formation of larger noble metal particles and maintaining a high CO oxidation activity at low temperatures. In a broader perspective, this approach to more efficiently use the noble metal can be transferred to further systems and reactions in heterogeneous catalysis.

Highly Active Oxidation Catalysts through Confining Pd Clusters on CeO2 Nano-Islands.

CeO2-supported noble metal clusters are attractive catalytic materials for several applications. However, their atomic dispersion under oxidizing reaction conditions often leads to catalyst deactivation. In this study, the noble metal cluster formation threshold is rationally adjusted by using a mixed CeO2-Al2O3 support. The preferential location of Pd on CeO2 islands leads to a high local surface noble metal concentration and promotes the in situ formation of small Pd clusters at a rather low noble metal loading (0.5 wt %), which are shown to be the active species for CO conversion at low temperatures. As elucidated by complementary in situ/operando techniques, the spatial separation of CeO2 islands on Al2O3 confines the mobility of Pd, preventing the full redispersion or the formation of larger noble metal particles and maintaining a high CO oxidation activity at low temperatures. In a broader perspective, this approach to more efficiently use the noble metal can be transferred to further systems and reactions in heterogeneous catalysis.

Buildup and Consumption of Species in Emulsion Droplets during Aqueous Suzuki Coupling Correlate with Yield.

Fluorescence lifetime imaging microscopy (FLIM) provides spatiotemporal resolution of the changing composition of emulsion droplets during aqueous-surfactant Suzuki coupling. In contrast to previous investigations, the present experiments characterize the full course of a catalytic chemical reaction, addressing key questions about reaction species buildup and correlating these microscale behaviors with bench-scale product yields. At low concentrations of (active) catalyst, droplet environments are stable; however, at higher concentrations, emulsion droplet environments change markedly. These changes are consistent with the buildup and consumption of reaction species inside the droplets. A combination of FLIM and bright-field imaging pinpoints limitations in catalyst solubility as controlling rate and degree of buildup of species in droplets. These solubility limitations are also identified as the cause of a reaction induction period and an origin of the rate-and-reproducibility advantage obtained by adding THF cosolvent. The subsequent mechanistic model from these data led to a bench-scale reaction optimization, wherein premixing the catalyst components bypasses the catalyst induction period, resulting in a faster reaction. The understanding generated by FLIM thus provides an early example of how visualizing changes in droplet compositions on the microscale during ongoing aqueous-organic reactions can be leveraged for enhancing efficiencies in bench-scale reactions.

Crystal phase-driven performance of MnO2 in aqueous phase low-temperature thermal catalysis: Synergistic interactions between Mn3+ and surface lattice oxygen

Catalytic oxidation at mild conditions is crucial for mitigating the high pressure and high temperature challenges associated with current catalytic wet air oxidation (CWAO) technologies in wastewater treatment. Among potential materials for catalytic oxidation reactions, polycrystalline MnO2 existed in natural minerals holds considerable promise. However, the relationships between different crystal phases of MnO2 and their catalytic activity sources in aqueous phase remain uncertain and subject to debate. In this research, we synthesized various MnO2 crystal phases, comprising α-, β-, δ-, γ-, ε-, and λ-MnO2, and assessed their catalytic oxidation efficiency during low-temperature heating for treatment of organic pollutants. Our findings demonstrate that λ-MnO2 exhibits the highest catalytic activity, followed by δ-MnO2, γ-MnO2, α-MnO2, ε-MnO2, and β-MnO2. The variations in catalytic activity among different MnO2 are attributed to variances in their oxygen vacancy abundance and redox activity. Furthermore, we identified the primary active species, which include Mn3+ and superoxide radicals (•O2–) generated by surface lattice oxygen of MnO2. This research highlights the critical role of crystal phases in influencing oxygen vacancy content, redox activity, and overall catalytic performance, providing valuable insights for the rational design of MnO2 catalysts tailored for effective organic pollutant degradation in CWAO applications.

Competitive Valerate Binding Enables RuO2-Mediated Butene Electrosynthesis in Water.

The (non)-Kolbe oxidation of valeric acid, sourced from a hydrolysis product of cellulose, provides a sustainable synthetic route to access value-added products, such as butene. An essential mechanistic step preceding product formation involves the oxidative and decarboxylative cleavage of a C-C bond. Yet, the role of the electrode surface in mediating this oxidative step remains an open question: the electron transfer can occur either via an inner-sphere or outer-sphere mechanism. Here, we report the electrochemical, in situ spectroscopic, computational, and reactivity studies of RuO2-mediated oxidative decarboxylation of valeric acid to butene in aqueous electrolytes. We find that carboxylates bind to RuO2 anode surfaces at potential values where decarboxylation products are observed. Our results are consistent with a reaction scheme where the competitive and catalytic oxygen evolution reaction (OER) is impeded by these bound carboxylate species while these species are inert toward butene formation. Our results implicate an outer-sphere electron transfer mechanism for decarboxylation where the surface chemistry of the RuO2 electrode serves to enable higher non-Kolbe reaction selectivity by suppressing the parasitic OER. Our findings delineate interfacial design principles for selective electrochemical systems that utilize water as the ultimate oxidant for sustainable decarboxylation.

Cascade C-H Activation and Two C-C Bond Forming in Reaction of Azalutetacyclopentadiene with 2-Methylbenzonitriles.

Azametallacyclopentadienes are an important class of metallacycles as the key intermediates in metal-promoted or catalyzed carbon-carbon coupling reaction of nitriles and alkynes. Rare-earth azametallacyclopentadienes have shown unique reactivity toward benzonitriles. The reaction chemistry of azalutetacyclopentadienes toward 2-methylbenzonitriles has been investigated in this work, showing different reactivity. Experimental and computational studies reveal that the reaction selectively initiates with the remote activation of the benzylic C-H bond by the Lu-N bond, followed by the intramolecular nucleophilic attack from the deprotonated benzylic carbon to form a C-C bond. Subsequently, the high ring strain promoted the generation of the uncoordinated carbanion dissociated from the lutetium center, which then undergoes intramolecular nucleophilic attack toward C≡N triple bond to give the final product containing fused 7-5-6-membered azalutetacycle. This work not only achieves highly selective three-step cascade transformation to form a unique class of rare-earth metallacycle, but also reveals a novel reaction pattern of unsaturated substrates with C-H bonds that can be activated.

Mechanistic Implications of the Varying Susceptibility of PAHs to Pyro-Catalytic Treatment as a Function of Their Ionization Potential and Hydrophobicity.

Transition metal catalysts in soil constituents (e.g., clays) can significantly decrease the pyrolytic treatment temperature and energy requirements for efficient removal of polycyclic aromatic hydrocarbons (PAHs) and, thus, lead to more sustainable remediation of contaminated soils. However, the catalytic mechanism and its rate-limiting steps are not fully understood. Here, we show that PAHs with lower ionization potential (IP) are more easily removed by pyro-catalytic treatment when deposited onto Fe-enriched bentonite (1.8% wt. ion-exchanged content). We used four PAHs with decreasing IP: naphthalene > pyrene > benz(a)anthracene > benzo(g,h,i)perylene. Density functional theory (DFT) calculations showed that lower IP results in stronger PAH adsorption to Fe(III) sites and easier transfer of π-bond electrons from the aromatic ring to Fe(III) at the onset of pyrolysis. We postulate that the formation of aromatic radicals via this direct electron transfer (DET) mechanism is the initiation step of a cascade of aromatic polymerization reactions that eventually convert PAHs to a non-toxic and fertility-preserving char, as we demonstrated earlier. However, IP is inversely correlated with PAH hydrophobicity (log Kow), which may limit access to the Fe(III) catalytic sites (and thus DET) if it increases PAH sorption to soil OM. Thus, ensuring adequate contact between sorbed PAHs and the catalytic reaction centers represents an engineering challenge to achieve faster remediation with a lower carbon footprint via pyro-catalytic treatment.

Hierarchical Carbon Nanocages as Superior Supports for Photothermal CO2 Catalysis.

The exploitation of hierarchical carbon nanocages with superior light-to-heat conversion efficiency, together with their distinct structural, morphological, and electronic properties, in photothermal applications could provide effective solutions to long-standing challenges in diverse areas. Here, we demonstrate the discovery of pristine and nitrogen-doped hierarchical carbon nanocages as superior supports for highly loaded, small-sized Ru particles toward enhanced photothermal CO2 catalysis. A record CO production rate of 3.1 mol·gRu-1·h-1 with above 90% selectivity in flow reactors was reached for hierarchical nitrogen-doped carbon-nanocage-supported Ru clusters under 2.4 W·cm-2 illumination without external heating. Detailed studies reveal that the enhanced performance originates from the strong broadband sunlight absorption and efficient light-to-heat conversion of nanocage supports as well as the excellent intrinsic catalytic reactivity of sub-2 nm Ru particles. Our study reveals the great potential of hierarchical carbon nanocages in photothermal catalysis to reduce the fossil fuel consumption of various industrial chemical processes and stimulates interest in their exploitation for other demanding photothermal applications.

Metal‐free nucleophilic substitution of α‐ferrocenyl alcohols

Ferrocene‐based derivatives play significant roles in biomedicine and catalytic reactions. This article demonstrates the C–O/N/S formation reactions of α‐ferrocenyl alcohols under mild conditions using the organic compound NTBC (2,2′,2″‐(nitrilotris (methylene))tris(1H‐benzo[d]imidazole‐5‐carboxylic acid)) as the catalyst. The catalyst is utilized in amounts of 5 mol% or less, and the majority of substrates yield derivatized products in good to excellent yields. This metal‐free catalytic method shows promising applications in the synthesis of pharmaceutical intermediates for its no metal pollution.

Highly Efficient Carbonylation of Propylene Oxide into β‐Butyrolactone Catalyzed over Co‐Al Bimetallic Species

Rational designation of the catalyst for efficient atom‐economic conversion of propylene oxide (PO) and carbon monoxide (CO) into β‐butyrolactone is of current significance. By employing the O,N,O‐tridentate ligands R1,R2LH2 (1‐4), the aluminium compounds (R1,R2LAlCl)2 (R1,R2 = H,H (5), tBu,tBu (6), Cl,Cl (7), Br,Br (8)) and the derived anion‐cation pairs [H,HLAl(THF)3]+[Co(CO)4]ˉ (9) and [(R1,R2LAl)2Cl(THF)2]+[Co(CO)4]ˉ (R1,R2 = tBu,tBu (10), Cl,Cl (11), Br,Br (12)) as well as the aluminium‐cobalt bimetallic cluster compounds [(R1,R2LAl)2Cl(THF)][Co3(CO)10] (R1,R2 = tBu,tBu (13), Cl,Cl (14), Br,Br (15)) were prepared. Compounds 9‐12 efficiently catalyzed the PO carbonylation into β‐butyrolactone to achieve up 93.4‐98.9% yields while 13‐15 gained 95.2‐99.0% yields all at 25 °C and 0.1 MPa CO pressure. The Lewis acidic property of the aluminium compounds 5‐8 was investigated. The kinetic of the catalytic reaction using compound 10 was studied. The cooperatively catalytic reaction mechanism by the Co‐Al bimetallic species is proposed.

Copper‐Catalyzed Dearomative 1,2‐Hydroamination

AbstractCatalytic olefin hydroamination reactions are some of the most atom‐economical transformations that bridge readily available starting materials–olefins and high‐value‐added amines. Despite significant advances in this field over the last two decades, the formal hydroamination of nonactivated aromatic compounds remains an unsolved challenge. Herein, we report the extension of olefin hydroamination to aromatic π‐systems by using arenophile‐mediated dearomatization and Cu‐catalysis to perform 1,2‐hydroamination on nonactivated arenes. This strategy was applied to a variety of substituted arenes and heteroarenes to provide general access to structurally complex amines. We conducted DFT calculations to inform mechanistic understanding and rationalize unexpected selectivity trends. Furthermore, we developed a practical, scalable desymmetrization to deliver enantioenriched dearomatized products and enable downstream synthetic applications. We ultimately used this dearomative strategy to efficiently synthesize a collection of densely functionalized small molecules.

Strong Interaction between Molybdenum Compounds and Mesoporous CMK‐5 Supports Boosts Hydrogen Evolution Reaction

AbstractStrong metal‐support interaction (SMSI) between transition metal nanoparticles and carbon matrix offers significant structure advantages due to the ability to modulate the electronic structure of metal nanoparticles, increase the density of active sites, and improve the conductivity of catalysts. Here, ultrafine nanoparticles of metallic molybdenum compounds (MoP, Mo2C, and MoS2) strongly coupled with mesoporous carbon CMK‐5 are synthesized. The confinement growth of nanoparticles in the pores of CMK‐5 produces encapsulated nanoparticles, affording facilitated electron transfer, and enhancing the HER activity induced by the SMSI effect. The hierarchical nanostructure and strong electronic interactions between the carbon substrate and molybdenum‐based nanoparticles allow efficient mass/electron transport between the carbon substrate and molybdenum‐based nanoparticles, improving the catalytic hydrogen evolution reaction (HER) activity. The effective electron exchange between the Mo species and the CMK‐5 support is studied by X‐ray photoelectron spectroscopy (XPS) measurement, confirming the presence of the SMSI effect. The resulting MoP/CMK‐5 catalyst exhibits outstanding HER performance in alkaline (65 mV@10 mA cm−2), acidic (123 mV@10 mA cm−2), and simulated seawater electrolytes (103 mV@10 mA cm−2), making it one of the most promising catalysts reported for HER. This work provides guidance on designing high‐performance electrocatalysts with SMSI for the enhancement of the electrochemical reaction.

Copper-Catalyzed Dearomative 1,2-Hydroamination.

Catalytic olefin hydroamination reactions are some of the most atom-economical transformations that bridge readily available starting materials-olefins and high-value-added amines. Despite significant advances in this field over the last two decades, the formal hydroamination of nonactivated aromatic compounds remains an unsolved challenge. Herein, we report the extension of olefin hydroamination to aromatic π-systems by using arenophile-mediated dearomatization and Cu-catalysis to perform 1,2-hydroamination on nonactivated arenes. This strategy was applied to a variety of substituted arenes and heteroarenes to provide general access to structurally complex amines. We conducted DFT calculations to inform mechanistic understanding and rationalize unexpected selectivity trends. Furthermore, we developed a practical, scalable desymmetrization to deliver enantioenriched dearomatized products and enable downstream synthetic applications. We ultimately used this dearomative strategy to efficiently synthesize a collection of densely functionalized small molecules.

Transition‐Metal Catalyzed Enantioselective Aziridination Reaction: Recent Development in Catalysis and Future Perspectives

Chiral aziridines are important motifs in natural products and biologically significant compounds, as well as one of the most valuable and versatile building blocks for the construction of diverse chiral functionalized amines. Because of the importance of chiral aziridines, various novel transition‐metal‐based catalytic systems and synthetic strategies have been established to investigate the highly effective and enantioselective aziridination process. This review outlined the recent significant advances made in the transition‐metal catalyzed enantioselective aziridination reactions, as well as the challenges and potential of the field at the current stage.

Cu-alginate hydrogels in microfluidic systems: a sustainable catalytic approach for click chemistry

This work explores the innovative use of copper-alginate (Cu-alginate) hydrogels within microfluidic systems to catalyze dipolar cycloaddition reactions, emphasizing green chemistry principles and process intensification. Utilizing naturally occurring biopolymers, such as alginates, provides an environmentally friendly alternative to conventional catalyst supports due to their biocompatibility, biodegradability, and effective metal ion immobilization capabilities. The integration of these biopolymer-based catalysts into microfluidic devices allows for precise control over reaction conditions, leading to enhanced reaction kinetics and mass transfer efficiencies. Our results demonstrate that Cu-alginate hydrogels effectively catalyze the formation of 1,4-disubstituted 1,2,3-triazoles through [3 + 2] dipolar cycloaddition reactions with high regioselectivity and conversion. The microfluidic setup ensures rapid and efficient synthesis, surpassing traditional batch reaction methods in both reaction rate and environmental impact by reducing solvent usage and waste generation. Furthermore, the use of microfluidics contributes to the reproducibility and scalability of the synthesis process, important for industrial applications. The model-based design and its simulations have been employed to further understand and optimize the reaction system. Diffusion through the gel layer and catalytic reaction kinetics estimated from experimental data were included in the model, providing a theoretical foundation for a comprehensive process evaluation. This study not only advances the field of sustainable catalysis by demonstrating the practical utility of biopolymer-supported catalysts in microfluidic systems, but also sets the stage for further research into biopolymer applications in complex chemical syntheses.

Zr‐MOF nanosheets featuring benzothiadiazoles enable efficient visible light driven photooxidation of sulfides and amines

Ultrathin zirconium‐based metal–organic framework (MOF) nanosheets, embedded with photochromic units, are expected to be highly efficient heterogeneous photocatalysts, thanks to their rich catalytic sites, short diffusion paths, and effective separation of photogenerated charge carriers. Herein, we reported the synthesis of novel Zr‐MOF nanosheets (Zr‐BTDB) through a solvothermal synthesis that integrates benzothiadiazole (BTz) as a photochromic moiety within the framework of MOF. The Zr‐BTDB nanosheets processes a [Zr12(μ3‐O)8(μ3‐OH)8(μ2‐OH)6] cluster with hcp topology. Importantly, Zr‐BTDB nanosheets exhibit excellent photocatalytic activity for the photooxidation of sulfides and amines at room temperature under blue light irradiation. Notably, these nanosheets maintain their photocatalytic activity and selectivity for up to five cycles without significant loss of activity and crystallinity. Systematical catalytic reactions revealed that the Zr‐BTDB nanosheets enable the generation of singlet oxygen (1O2) and superoxide radical (O2•–) under visible light irradiation, which is critical reactive oxygen species for the photooxidation of sulfides and benzylamines. Our work represents a straightforward route for the preparation of ultrathin, water stable, and visible‐light‐activated Zr‐MOF nanosheets, offering new potentials for the selective photooxidation of sulfides and amines in an eco‐friendly way.