Hydrophobic Drug Carrier Research Articles

Synthesis and Physicochemical Characterization of Amphiphilic Triblock Copolymer Brush Containing pH-Sensitive Linkage for Oral Drug Delivery

A novel and well-defined pH-sensitive amphiphilic triblock copolymer brush poly(lactide)-b-poly(methacrylic acid)-b-poly(poly(ethylene glycol) methyl ether monomethacrylate) (PLA-b-PMAA-b-PPEGMA) and its self-assembled micelles were developed for oral administration of hydrophobic drugs. The copolymer and its precursors were synthesized by the combination of activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) and ring-opening polymerization (ROP) techniques. The molecular structures and characteristics were confirmed by GPC, (1)H NMR, and FT-IR. The critical micelle concentration (CMC) values of PLA-b-PMAA-b-PPEGMA in aqueous medium varied from 1.4 to 2.6 mg/L, and the partition equilibrium constant (K(v)) of pyrene in micellar solutions ranged from 2.873 × 10(5) to 3.312 × 10(5). The average sizes of the self-assembled blank and drug-loaded micelles were 140-250 nm determined by DLS in aqueous solution. The morphology of the micelles was found to be spherical by SEM. Nifedipine (NFD), a poorly water-soluble drug, was selected as the model drug and wrapped into the core of micelles via dialysis method. The in vitro release behavior of NFD from the micelles was pH-dependent. In simulated gastric fluid (SGF, pH 1.2), the cumulative release percent of NFD was relative low, while in simulated intestinal fluid (SIF, pH 7.4), more than 96% was released within 24 h. All the results showed that the pH-sensitive PLA-b-PMAA-b-PPEGMA micelle may be a prospective candidate as oral drug delivery carrier for hydrophobic drugs with controlled release behavior.

Copper(II) coordination properties of the integrin ligand sequence PHSRN and its new β-cyclodextrin conjugates

The peptide sequence PHSRN is the second cell binding site of the human fibronectin protein, a glycoprotein which plays a critical adhesive role during development, tissue repair and angiogenesis. The copper(II) complexes with the peptide fragment PHSRN were characterized by potentiometric and UV–visible, CD, EPR spectroscopic methods. Thermodynamic and spectroscopic evidences indicate that at physiological pH, only one copper(II) complex species, [CuLH−2], is present and the metal ion is bound to one imidazole and two amide nitrogen atoms (NIm, 2N−) in a tetrahedral distorted square planar coordination. Two new β-cyclodextrin–ethylendiamino derivatives with the PHSRN covalently attached were synthesized as multitargeting molecules, able to have a site-specific recognition sequence, to interact with copper(II) ions and to be a potential carrier of hydrophobic drugs. Copper(II) complexes with these β-cyclodextrin derivatives were characterized by means of potentiometric and spectroscopic techniques. The comparison of the experimental parameters determined at different pH values with those obtained for the parent peptide complex species, shows that at physiological pH the ethylendiamino-β-CD moiety does not influence the peptide interaction with copper ions and the β-CD hydrophobic cavity is not blocked, being available to host hydrophobic drugs such as naproxen.

Thermosensitive nanosized micelles from cholesteryl-modified hydroxypropyl cellulose as a novel carrier of hydrophobic drugs

The thermosensitive micelles based on the two series of cholesteryl-modified hydroxypropyl cellulose (series 1 and 2, respectively) were used as a promising drug carrier. The polymers 1a and 2a with side chain substitution degrees DChol = 0.7 and 2.1 mol% were selected for micelle preparation, respectively. Polymeric micelles were prepared by the co-solvent evaporation method. The aqueous self-assembly of the polymers was studied using fluorescence analysis and transmission electron microscopy (TEM). The critical micelle concentrations (CMCs) values of the various DChol of polymers were evaluated in the range of ca. 0.13–0.29 g/L which decreased with the increase of DChol in both series. Furthermore, the CMC values displayed a downtrend profile, with increasing the temperature. The polymer 1a with less DChol had lower CMC than that of polymer 2a. By using the naproxen as a hydrophobic model drug, the drug-loaded micelles were prepared. The TEM image of naproxen-loaded micelles of polymer 1a with 40 % drug-loading efficiency and 8 % loading capacity showed that micelles were regularly spherical in shape with a mean diameter of 70 nm. The unmodified HPC exhibited a lower critical solution temperature (LCST) of more than 41 °C in water, while polymeric micelles in aqueous solution presented an LCST of 38.7 °C. A drug release study was performed by dialysis method in phosphate-buffered solution at 25, 37 and 40 °C, respectively. The release kinetics of naproxen from the polymeric micelles revealed a thermosensitivity, since its release rate was higher at 40 °C than at 25 °C.

A self-assembling peptide RADA16-I integrated with spider fibroin uncrystalline motifs

Mechanical strength of nanofiber scaffolds formed by the self-assembling peptide RADA16-I or its derivatives is not very good and limits their application. To address this problem, we inserted spidroin uncrystalline motifs, which confer incomparable elasticity and hydrophobicity to spider silk GGAGGS or GPGGY, into the C-terminus of RADA16-I to newly design two peptides: R3 (n-RADARADARADARADA-GGAGGS-c) and R4 (n-RADARADARADARADA-GPGGY-c), and then observed the effect of these motifs on biophysical properties of the peptide. Atomic force microscopy, transmitting electron microscopy, and circular dichroism spectroscopy confirm that R3 and R4 display β-sheet structure and self-assemble into long nanofibers. Compared with R3, the β-sheet structure and nanofibers formed by R4 are more stable; they change to random coil and unordered aggregation at higher temperature. Rheology measurements indicate that novel peptides form hydrogel when induced by DMEM, and the storage modulus of R3 and R4 hydrogel is 0.5 times and 3 times higher than that of RADA16-I, respectively. Furthermore, R4 hydrogel remarkably promotes growth of liver cell L02 and liver cancer cell SMCC7721 compared with 2D culture, determined by MTT assay. Novel peptides still have potential as hydrophobic drug carriers; they can stabilize pyrene microcrystals in aqueous solution and deliver this into a lipophilic environment, identified by fluorescence emission spectra. Altogether, the spider fibroin motif GPGGY most effectively enhances mechanical strength and hydrophobicity of the peptide. This study provides a new method in the design of nanobiomaterials and helps us to understand the role of the amino acid sequence in nanofiber formation.

Hollow superparamagnetic iron oxide nanoshells as a hydrophobic anticancer drug carrier: intracelluar pH-dependent drug release and enhanced cytotoxicity

With curcumin and doxorubicin (DOX) base as model drugs, intracellular delivery of hydrophobic anticancer drugs by hollow structured superparamagnetic iron oxide (SPIO) nanoshells (hydrodynamic diameter: 191.9 ± 2.6 nm) was studied in glioblastoma U-87 MG cells. SPIO nanoshell-based encapsulation provided a stable aqueous dispersion of the curcumin. After the SPIO nanoshells were internalized by U-87 MG cells, they localized at the acidic compartments of endosomes and lysosomes. In endosome/lysosome-mimicking buffers with a pH of 4.5-5.5, pH-dependent drug release was observed from curcumin or DOX loaded SPIO nanoshells (curcumin/SPIO or DOX/SPIO). Compared with the free drug, the intracellular curcumin content delivered via curcumin/SPIO was 30 fold higher. Increased intracellular drug content for DOX base delivered via DOX/SPIO was also confirmed, along with a fast intracellular DOX release that was attributed to its protonation in the acidic environment. DOX/SPIO enhanced caspase-3 activity by twofold compared with free DOX base. The concentration that induced 50% cytotoxic effect (CC(50)) was 0.05 ± 0.03 μg ml(-1) for DOX/SPIO, while it was 0.13 ± 0.02 μg ml(-1) for free DOX base. These results suggested SPIO nanoshells might be a promising intracellular carrier for hydrophobic anticancer drugs.

Preparation and characterization of solid lipid nanoparticles loaded with frankincense and myrrh oil

The aim of the present study was to prepare solid lipid nanoparticles (SLNs) for the oral delivery of frankincense and myrrh essential oils (FMO). Aqueous dispersions of SLNs were successfully prepared by a high-pressure homogenization method using Compritol 888 ATO as the solid lipid and soybean lecithin and Tween 80 as the surfactants. The properties of the SLNs such as particle size, zeta potential (ZP), and drug encapsulation efficiency (EE) were investigated. The morphology of SLNs was observed by transmission electron microscopy (TEM). The crystallinity of the formulation was analyzed by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). In addition, drug evaporation release and antitumor activity were also studied. Round SLNs with a mean size of 113.3 ± 3.6 nm, a ZP of −16.8 ± 0.4 mV, and an EE of 80.60% ± 1.11% were obtained. DSC and XRD measurements revealed that less ordered structures were formed in the inner cores of the SLN particles. Evaporation loss of the active components in FMO could be reduced in the SLNs. Furthermore, the SLN formulation increased the antitumor efficacy of FMO in H22-bearing Kunming mice. Hence, the presented SLNs can be used as drug carriers for hydrophobic oil drugs extracted from traditional Chinese medicines.

Construction of paclitaxel-loaded poly (2-hydroxyethyl methacrylate)-g-poly (lactide)- 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine copolymer nanoparticle delivery system and evaluation of its anticancer activity

BackgroundThere is an urgent need to develop drug-loaded biocompatible nanoscale packages with improved therapeutic efficacy for effective clinical treatment. To address this need, a novel poly (2-hydroxyethyl methacrylate)-poly (lactide)-1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine [PHEMA-g-(PLA-DPPE)] copolymer was designed and synthesized to enable these nanoparticles to be pH responsive under pathological conditions.MethodsThe structural properties and thermal stability of the copolymer was measured and confirmed by Fourier transform infrared spectroscopy, nuclear magnetic resonance, and thermogravimetric analysis. In order to evaluate its feasibility as a drug carrier, paclitaxel-loaded PHEMA-g-(PLA-DPPE) nanoparticles were prepared using the emulsion-solvent evaporation method.ResultsThe PHEMA-g-(PLA-DPPE) nanoparticles could be efficiently loaded with paclitaxel and controlled to release the drug gradually and effectively. In vitro release experiments demonstrated that drug release was faster at pH 5.0 than at pH 7.4. The anticancer activity of the PHEMA-g-(PLA-DPPE) nanoparticles was measured in breast cancer MCF-7 cells in vivo and in vitro. In comparison with the free drug, the paclitaxel-loaded PHEMA-g-(PLA-DPPE) nanoparticles could induce more significant tumor regression.ConclusionThis study indicates that PHEMA-g-(PLA-DPPE) nanoparticles are promising carriers for hydrophobic drugs. This system can passively target cancer tissue and release drugs in a controllable manner, as determined by the pH value of the area in which the drug accumulates.

Amphiphilic copolymer brush with random pH-sensitive/hydrophobic structure: synthesis and self-assembled micelles for sustained drug delivery

A random hydrophobic/pH-sensitive copolymer brush poly(polylactide methacrylate-co-methacrylic acid)-b-poly(poly(ethylene glycol) methyl ether methacrylate) [P(PLAMA-co-MAA)-b-PPEGMA] and its self-assembled micelles were developed for oral administration of hydrophobic drugs. The polymer was synthesized by the combination of activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) and ring opening polymerization (ROP). The CMC of P(PLAMA-co-MAA)-b-PPEGMA in aqueous solution was extremely low (about 1.5 mg L−1). The self-assembled blank and drug-loaded micelles were spherical in morphology and had an average size of 160–220 nm, determined by DLS and SEM. Ibuprofen (IBU) was selected as the model drug and encapsulated into the core of micelles via a dialysis method. The in vitro release behavior of IBU from these micelles was pH-dependent. In simulated gastric fluid (SGF, pH 1.2), the cumulative release of IBU was less than 25% of the initial drug content over 24 h, suggesting that the drug can be well protected from the harsh environment in stomach. While in simulated intestinal fluid (SIF, pH 7.4), the ionization of carboxyl groups of MAA contributed to the swelling of the micelle structure, which could accelerate the IBU release from the micelles. 35–45% of IBU was released in 8 h, 60% in 24 h, and 100% after 56 h for P(PLAMA6.3k-co-MAA3k)-b-PPEGMA4k micelles, and it was 50% in 2 h, 90% in 10 h, and 100% after 14 h for P(PLAMA6.3k-co-MAA4.5k)-b-PPEGMA4k micelles with an increased content of MAA. All the results indicate that the pH-sensitive P(PLAMA-co-MAA)-b-PPEGMA micelles may be a potential oral drug delivery carrier for hydrophobic drugs with sustained release.

Preparation of Polymeric Micelles Consisting of Poly(propylene glycol) and Poly(caprolactone)

The ring-opening polymerization of epsilon-caprolactone (CL) was carried out with polypropylene glycol (PPG) as an initiator in the presence of the monomer activator HCl. Et2O to synthesize poly(epsilon-caprolactone)-poly(propyleneglycol)-poly(epsilon-caprolactone) (PCL-PPG-PCL) triblock copolymers with change of length PPG and PCL. The micelle formation of PCL-PPG-PCL triblock copolymers in an aqueous phase was confirmed by NMR, dynamic light scattering and fluorescence techniques. The critical micelle concentration (CMC) of the PCL-PPG-PCL triblock copolymers, determined from fluorescence measurements, was in range of 1.4 x 10(-3)-4.6 x 10(-3) mg/ml with dependence on block lengths of PPG and PCL. The partition equilibrium constant, K(v), which is an indicator of the hydrophobicity of the micelles of the PCL-PPG-PCL triblock copolymers in aqueous media, was also changed with dependence on length PPG and PCL. We confirmed that the PCL-PPG-PCL triblock copolymers formed micelles and hence may be potential hydrophobic drug carriers.

Electrospun PLA/PCL fibers with tubular nanoclay: Morphological and structural analysis

AbstractBiodegradable polymers are good candidates for a wide range of applications in tissue engineering and drug delivery because of their biocompatibility, their degradation, mechanical properties, and offer a sustained release of encapsulated drugs. The electrospun polymer nanofibrous materials can be used as carriers for hydrophobic and hydrophilic drugs. This research work focused on poly(lactic acid) (PLA) and blends of PLA with poly (ε‐caprolactone) (PCL) that are reinforced with different concentrations of halloysite nanotubes (HNTs) and various cosolvents for electrospinning including chloroform : acetone, chloroform : methanol, and dichloromethane (DCM) : N,N, dimethylformamide (DFM). The fibers produced from the DCM : DMF system without HNTs were more uniform resulting in smaller fiber diameters as compared to the chloroform: methanol system due to the increased solution conductivity. The addition of HNT nanoparticles produced electrospun fibers with large diameters because the viscosity of the solution increased. Cosolvent was important in determining fiber diameters because it strongly influenced the solution viscosity and conductivity. HNTs had relatively small impact on the growth of a crystalline morphology in PCL–HNT composites. The solvent mixture of chloroform : methanol was better for PLA‐based systems since PLA was found to have slightly higher crystallinity and larger enthalpy value indicating the improved structural orderness in the PLA polymer matrix. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012

Copolymer of star poly(epsilon‐caprolactone) and polyglycidols as potential carriers for hydrophobic drugs

AbstractAmphiphilic star shape poly(ε‐caprolactone)‐b‐hyperbranched polyglycidol (sPCL‐HPG) were synthesized and used to investigate micell formation and to encapsulate hydrophobic drugs. The synthesis of sPCL‐HPG copolymers was carried out by using sPCL as macroinitiator for the ensuing of hypergrafting reaction with glycidols. 1H‐NMR and FTIR were used to characterize sPCL‐b‐HPG structures. The self‐assembled structure of the sPCL‐HPG was characterized by scanning electronic microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM). The size and size dispersities of micelles were measured by dynamic light scattering DLS. Critical micelle concentration (CMC) was determined using pyrene as fluorescent probe. Hydrophobic methyl red was encapsulated in sPCL‐HPG micelles to illustrate hydrophobic drug loading. The copolymer micelles were used to enhance paclitaxel solubility. The results showed that hydrophobic drugs could be encapsulated in the sPCL‐HPG micelles. The paclitaxel solubility in the micelles of 5 wt% of sPCL23‐HPG170 got to 168 µg/ml. sPCL‐HPG, which have biodegrability and hydrophobicity at PCL part and smaller size of HPG fragments while maintaining the total repeating units of glycidols, provide an alternative choice of carriers for poorly soluble drugs. Copyright © 2011 John Wiley & Sons, Ltd.

ChemInform Abstract: Techniques for Efficient Entrapment of Pharmaceuticals in Biodegradable Solid Micro/Nanoparticles

AbstractReview: 91 refs.

Fluorescence Studies on a Designed Peptide of REIP as a Potential Hydrophobic Drug Carrier

Many hydrophobic drugs have limited or no activity in clinical application due to their poor aqueous solubility. In order to find fine delivery system, we designed a novel peptide REIP (Ac-RIEIRIEIAPAIEIRIEIR) and investigated its properties as a delivery system. Microcrystal of pyrene could be stabilized by the peptide REIP and suspended in aqueous solution. We used pyrene as a model hydrophobic drug and egg phosphatidylcholine (EPC) vesicles as model membranes to study the ability of REIP in hydrophobic drug encapsulation and transfer to EPC vesicles (liposome) by analyzing the fluorescence spectroscopy of pyrene. It was found that pyrene was present in the crystalline form when stabilized by REIP and was able to transfer into EPC vesicles in molecular form. The concentration of pyrene released into the EPC vesicles at a given time was quantified using a calibration curve. Double exponential curve fitting was better for the release profiles of REIP-Py solution than single exponential curve fitting.

Multi-responsive nanogels containing motifs of ortho ester, oligo(ethylene glycol) and disulfide linkage as carriers of hydrophobic anti-cancer drugs

A family of multi-responsive nanogels with different compositions and crosslinking degrees have been prepared by the miniemulsion copolymerization of monomethyl oligo(ethylene glycol) acrylate (OEGA) and an ortho ester-containing acrylic monomer, 2-(5,5-dimethyl-1,3-dioxan-2-yloxy) ethyl acrylate (DMDEA), with bis(2-acryloyloxyethyl) disulfide (BADS) as a crosslinker. These nanogels are thermoresponsive and labile in the weakly acidic or reductive environments. The thermoresponsive behaviors, acid-triggered hydrolysis, and reduction-induced degradation of these nanogels were studied by means of dynamic light scattering (DLS), transmission electron microscopy (TEM) and atomic force microscopy (AFM). The results indicate that the volume phase transition temperature (VPTT), thermally induced deswelling ratio, and acid-triggered swelling ratio of the nanogels are closely relevant to their compositions and crosslinking degrees. Although these nanogels could be reductively disrupted by dithiothreitol (DTT), single polymer chains with sizes smaller than 20 nm were not detected by DLS. This is probably due to the existence of some unbreakable linkages formed by chain transfer to the disulfide bond during the radical polymerization. These nanogels are capable of encapsulating hydrophobic compounds. The loading capability of the nanogels for Nile Red (NR), paclitaxel (PTX), and doxorubicin (DOX), and the release behaviors of the drug-loaded nanogels were investigated by UV–vis spectrometry and HPLC. As expected, drug release can be greatly accelerated by a cooperative effect of both acid-triggered hydrolysis and DTT-induced degradation. Finally, the PTX-loaded nanogels exhibit a concentration-dependent toxicity to MCF-7 cells while the intact unloaded nanogels are non-toxic, thereby they may be used as potential carriers for hydrophobic anticancer drugs.

Preparation and characterization of self-assembled nanoparticles of 6-O-cholesterol-modified chitosan for drug delivery

6-O-Cholesterol modified chitosan (O-CHCS) conjugates with succinyl linkages were synthesized through a protection-graft-deprotection method with phthaloylchitosan as an intermediate. O-CHCS conjugates were characterized by Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (1H NMR), and the degrees of substitution (DS) of the cholesterol moiety determined by elemental analysis were 1.7%, 4.0% or 5.9%. O-CHCS self-assembled nanoparticles prepared by the dialysis method displayed the classic “core–shell” structures and their sizes were in the range of 100–240nm. All-trans retinoic acid (ATRA), as a model drug, was physically entrapped inside O-CHCS self-assembled nanoparticles by the dialysis method. With increasing initial levels of the drug, the drug loading content increased, but the encapsulation efficiency and the particle size decreased. The release profiles in vitro demonstrated that ATRA showed slow sustained released over 72h, which indicated that O-CHCS self-assembled nanoparticles had the potential to be used as a carrier for hydrophobic drugs.

Polymeric Micelles in Anticancer Therapy: Targeting, Imaging and Triggered Release

Micelles are colloidal particles with a size around 5–100 nm which are currently under investigation as carriers for hydrophobic drugs in anticancer therapy. Currently, five micellar formulations for anticancer therapy are under clinical evaluation, of which Genexol-PM has been FDA approved for use in patients with breast cancer. Micelle-based drug delivery, however, can be improved in different ways. Targeting ligands can be attached to the micelles which specifically recognize and bind to receptors overexpressed in tumor cells, and chelation or incorporation of imaging moieties enables tracking micelles in vivo for biodistribution studies. Moreover, pH-, thermo-, ultrasound-, or light-sensitive block copolymers allow for controlled micelle dissociation and triggered drug release. The combination of these approaches will further improve specificity and efficacy of micelle-based drug delivery and brings the development of a ‘magic bullet’ a major step forward.

In vitro degradability and stability of hydrophobically modified pH‐sensitive micelles using MPEG‐grafted poly(β‐amino ester) for efficient encapsulation of paclitaxel

AbstractMethoxypoly(ethylene glycol)‐grafted poly(β‐amino ester) was synthesized for the fabrication of pH‐sensitive micelles, and these micelles were modified with deoxycholic acid to facilitate the hydrophobic interaction between the micellar core and paclitaxel. The micelle properties were studied by dynamic light scattering and fluorescence spectrometry. An in vitro degradation study showed that the synthesized polymers degraded hydrolytically within 24 h under physiological conditions. The stability of paclitaxel‐loaded pH‐sensitive micelles was evaluated in vitro. The introduced deoxycholic acid more stabilized the micelles at pH 7.4 compared to the micelles without modification. But the pH‐sensitive region of the micelles was lowered from pH 6.8 to pH 5.8. These results indicate that pH‐sensitive micelles with improved stability have great potential as hydrophobic drug carriers for tumor targeting. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010

Safety Evaluation of Amphiphilic Three-Armed Star-Shaped Copolymer Micelles

In our previous work, we had prepared a biodegradable amphiphilic three-armed star-shaped copolymers (SPCE) based on poly(epsilon-caprolactone) (PCL) and poly(ethylene glycol) (PEG), which could form micelles by self-assembly method and it was a potential carrier for hydrophobic drug. For further application, the safety of SPCE micelles was evaluated in vitro and in vivo here. (13)C-NMR was used to confirm the formation of the micelles in aqueous solution, and the morphology was observed on transmission electron microscope (TEM). Also, thermostability of blank SPCE micelles was determined by Malvern Nano-ZS 90 laser particle size analyzer. In vitro toxicity evaluation included hemolytic test and cytotoxicity. In vivo acute toxicity tests and histopathological study of SPCE micelles were carried out on BALB/C mice which were administrated SPCE micelles (1 g/kg b.w.) intravenously. In acute toxicity test, the mice were observed continuously for 7 days, obtained their body weight every day, at last the mice was sacrificed for the following study: the blood of the mice was assigned for blood chemistry and routine analysis, the heart, liver, spleen, lung, and kidneys were used for histopathological study. All results indicated that the biodegradable self-assembled SPCE micelles were nontoxic; therefore, it might be used as a safe candidate for drug delivery system.

Preparation and pharmacodynamics of stearic acid and poly (lactic-co-glycolic acid) grafted chitosan oligosaccharide micelles for 10-hydroxycamptothecin

Stearic acid (SA) and poly (lactic-co-glycolic acid) (PLGA) grafted chitosan oligosaccharide (SA-CSO-PLGA SCP) tripolymer was synthesized via the reaction between the carboxyl group of SA or PLGA with carboxylic side group, and the amine group of CSO in the presence of 1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC). The degrees of amino-substitution for SA and PLGA were assayed through 2, 4, 6-trinitrobenzene sulfonic acid (TNBS) test and 13C NMR spectrum, which were 8.15% and 5.82%, respectively; the critical micelle concentrations of SCP in PBS (pH 7.4) and deionized water (DI water) were about 34.9 and 14.5 μg/ml, respectively. Using 10-hydroxycamptothecin (HCPT) as a model drug, the drug-loaded micelles showed above 86% encapsulation efficiency, which not only enhanced the solubility of HCPT in aqueous medium markedly, but also protected the lactone ring of HCPT. Cellular uptakes of SCP micelles against A549, MCF-7 and HepG-2 tumor cells showed a faster cellular internalization. Comparing to the commercial HCPT injection, HCPT-loaded micelles showed higher cytotoxicities against A549, MCF-7 and HepG-2 cells. The increased folds were 22, 18 and 15, respectively. These results suggested the SCP could be applied as a carrier for hydrophobic drugs.

Enzyme-assisted formation of nanosphere: a potential carrier for hydrophobiccompounds

In this study, we report the use of a phosphatase to catalyze the formation of nanospheresfrom a hydrophobic compound (Ada-GFFY-OMe, 2) via a unique mechanism. Thenanospheres were stable in aqueous solutions for two weeks. Their size couldbe controlled by both concentrations of the precursor (Ada-GFFY(p)-OMe, 1)and the enzyme and the nanospheres were characterized by SEM and dynamiclight scattering (DLS). We then demonstrated that nanospheres could help thecell-impermeable propidium iodine (PI) to penetrate the cells, which impliedthat the nanospheres have the potential to be developed into useful carriers forhydrophobic drugs. This study offers the first example of using an enzyme to controlthe formation of nanospheres from a hydrophobic compound. There is thus thepotential that nanospheres can be developed into a carrier for hydrophobic drugs.