Carrier Solution Research Articles

Impact of the Design of Different Infusion Containers on the Dosing Accuracy of a Therapeutic Drug Product

Residual volumes of infusion solutions vary greatly due to container and dimensional variances. Manufacturers use overfill to compensate, but the exact amounts vary significantly. This variability in overfill – when carrier solutions are used to dilute other parenteral preparations – may lead to variable concentrations and dosing, hence, potential risk for patients.We analyzed the overfill and residual volume of 22 pre-filled infusion containers and evaluated the impact on the (simulated) dosing accuracy of a therapeutic drug product for different handling scenarios. In addition, compendial properties of the diluents (i.e. sub-visible particles, pH, color and opalescence) were assessed. The overfill and residual volume between different containers for the same diluent varied. As container size increased, the relative volume of overfill decreased while the residual volume remained constant. The design and material of the containers (e.g. port systems) defined the residual volume. Different handling scenarios led to differences in dosing accuracy. As a result, no universal approach applicable for all containers can be defined. To ensure the right dose, it is recommended to pre-select the preferred diluent, evaluate fill volumes of carrier solutions, and assess in-use compatibility of the product solution with its diluent in terms of concentration and volume.

Resveratrol attenuates efavirenz-induced hepatic steatosis and hypercholesterolemia in mice by inhibiting pregnane X receptor activation and decreasing inflammation

Efavirenz (EFV), a widely prescribed antiviral medication, has been implicated in dyslipidemia and can activate the pregnane X receptor (PXR), leading to hepatic steatosis and hypercholesterolemia in mice. Resveratrol (RES) can ameliorate hepatic steatosis and functions as a partial PXR agonist, capable of mitigating PXR expression induced by other PXR agonists. Therefore, we hypothesized that RES could attenuate EFV-induced hepatic steatosis and hypercholesterolemia by downregulating PXR expression and suppressing inflammatory cytokine production. Here, we conducted an in vivo study involving 6-week-old male mice, which were divided into 4 groups for a 7-day intervention: control (carrier solution), EFV (80 mg/kg), RES (50 mg/kg), and RES + EFV groups. Serum and hepatic tissue samples were collected to assess cholesterol and triglyceride concentrations. Hepatic lipid accumulation was evaluated through hematoxylin-eosin and oil red O staining. Polymerase chain reaction and western blot were performed to quantify hepatic inflammatory factors, lipogenic gene, and PXR expression. Our results indicated that hepatic lipid droplet accumulation was reduced in the RES + EFV group compared with the EFV group. Similarly, the expressions of hepatic inflammatory factors were attenuated in the RES + EFV group relative to the EFV group. Furthermore, RES counteracted the upregulation of hepatic lipid-metabolizing enzymes induced by EFV at both the transcriptional and protein levels. Importantly, PXR expression was downregulated in the RES + EFV group compared with the EFV group. Conclusively, our findings suggest that RES effectively mitigates EFV-induced hepatic steatosis and hypercholesterolemia by inhibiting PXR activation and decreasing inflammation.

Investigating the Operation of an LNG Carrier as a Floating Power Generating Plant (FPGP)

The paper provides a novel alternative solution for the old generation turbine LNG carriers (LNG/Cs) in order to extend their life cycle, thus avoiding their demolition. Nowadays, the use of liquefied natural gas (LNG) as fuel for the production of electricity is predominant against other fossil fuels. LNG has been widely recognized as the most promising alternative fuel, combining both high efficiency and environmental friendliness. The old generation of steam turbine LNG/Cs with the distinct disadvantage of a low thermal efficiency ratio, leading to higher fuel costs, are coming to a crossroad, which is either to keep the vessel on duty until the end of their life cycle, earning low fares as those are not preferred from the charterers, or to change the use of the vessel, converting them either to a FSRU (floating storage regasification unit) or to a FPGP (floating power generating plant). In this paper, the last alternative is proposed via a holistic examination of the techno-economical (the CBA performed calculates all related metrics) but also in terms of the electric energy market by utilizing power purchase agreements (PPAs) and the contracts for difference (CfDs). This conversion into an FPGO is a novel approach providing a ‘win–win’ solution scheme, on the one hand, to areas with the non-economical bunkering chain of LNG along with non-expensive electricity production, while on the other hand, it provides an extension of the profitable life cycle of the LNG/Cs under study, which would otherwise have been considered of obsolete technology. The proposition is supported by figurative numerical case studies that help extract tangible conclusions regarding the degree of the investment viability.

Getting ahead of Alzheimer's disease: early intervention with focused ultrasound.

The amyloid-β (Aβ) hypothesis implicates Aβ protein accumulation in Alzheimer's disease (AD) onset and progression. However, therapies targeting Aβ have proven insufficient in achieving disease reversal, prompting a shift to focus on early intervention and alternative therapeutic targets. Focused ultrasound (FUS) paired with systemically-introduced microbubbles (μB) is a non-invasive technique for targeted and transient blood-brain barrier opening (BBBO), which has demonstrated Aβ and tau reduction, as well as memory improvement in models of late-stage AD. However, similar to drug treatments for AD, this approach is not sufficient for complete reversal of advanced, symptomatic AD. Here we aim to determine whether early intervention with FUS-BBBO in asymptomatic AD could delay disease onset. Thus, the objective of this study is to measure the protective effects of FUS-BBBO on anxiety, memory and AD-associated protein levels in female and male triple transgenic (3xTg) AD mice treated at an early age and disease state. Here we show that early, repeated intervention with FUS-BBBO decreased anxiety-associated behaviors in the open field test by 463.02 and 37.42% in male and female cohorts, respectively. FUS-BBBO preserved female aptitude for learning in the active place avoidance paradigm, reducing the shock quadrant time by 30.03 and 31.01% in the final long-term and reversal learning trials, respectively. Finally, FUS-BBBO reduced hippocampal accumulation of Aβ40, Aβ42, and total tau in females by 12.54, 13.05, and 3.57%, respectively, and reduced total tau in males by 18.98%. This demonstration of both cognitive and pathological protection could offer a solution for carriers of AD-associated mutations as a safe, non-invasive technique to delay the onset of the cognitive and pathological effects of AD.

Nanoplastic production procedure for scientific purposes: PP, PVC, PE-LD, PE-HD, and PS

Studies on the environmental impact of nanoplastics face challenges in plastic analysis and a scarcity of nanoplastic materials necessary for the development of analytical techniques and experiments on biota impact. Here we provide detailed procedures for obtaining nanoparticles suspended in water for the most commonly used polymers: Polypropylene (PP), Polyvinylchloride (PVC), Low- and High-Density Polyethylene (PE-LD, PE-HD), and Polystyrene (PS). We dissolved larger size material to reprecipitate nanoparticles. For all plastic types, we obtained nanoparticles with a size between 50 and 300 nm, and a mainly spherical morphology. We verified that no irreversible agglomeration or coalescence of the particles occurred after 5 days of storage. The concentrations obtained in the final carrier solution were of the order of 109 particles mL−1. To prevent the persistence of reagents in the final carrier solution, a filtration step was implemented at the end of the process. The method proved unsuitable for Polyethylene Terephthalate (PET).

Reducing toxic element leaching in mine tailings with natural zeolite clinoptilolite.

The use of natural zeolite clinoptilolite to reduce the leaching rate of potentially toxic elements such as Cd, Pb, and Mn in soil from mine tailings was studied. Soil from the surroundings of the mine El Bote in Zacatecas, Mexico, was analyzed, and the zeolite was characterized by X-ray diffraction, Fourier-transform infrared spectroscopy, and nitrogen physisorption. An ammonium-exchange method for the zeolite was employed. Leaching experiments using packed columns with polluted soil and zeolite mixtures were carried out and the effect of the pH of the carrier solutions was studied. Incorporation of zeolite in the soil achieved a beneficial increase in pH, from 5.03 to 6.95. The concentration of Cd and Mn was reduced when zeolite was present in the column and the ammonium-modified zeolite with ammonia also enhanced the concentration reduction of metallic species in leachates in a range of 28 to 68%. The first-order model best fits the experimental data, suggesting that the leaching rate is controlled by concentration difference between the liquid and the soil matrix. These results demonstrate the potential for using natural zeolite clinoptilolite to reduce the leaching rate of potentially toxic elements in soil from mine tailings.

Quantitative analysis of trace elements in technological materials using online-laser ablation of solids in liquids (online-LASIL)

To overcome the challenges of the 21st century, the demand for novel materials which outperforms the limits of previous material classes is high. However, the elemental composition determines crucial material properties from the bulk stoichiometry down to ultra-trace impurities. Therefore, a precise analytical characterization is inevitable to establish a connection between composition and function.For this purpose, conventional solid sampling techniques could be applied. However, matrix-matched standards are indispensable for quantitative analysis and are often unavailable in the case of technological materials. To overcome this limitation online-Laser Ablation of Solids in Liquids (online-LASIL) has been proposed recently, which combines the advantages of solution-based analysis and solid sampling techniques. However, this technique has only been applied to determine sample stoichiometry.In this work, major improvements of the online-LASIL approach were reported by the controllable segmentation of the carrier solution, leading to an improved washout behavior of the ablated material, enabling the quantitative investigation at trace levels. The accuracy of this improved measurement setup is validated by the quantitative analysis of trace elements in the standard reference material (SRM) NIST612. To demonstrate the applicability of this method, silicon carbide (SiC), a wide bandgap semiconductor, was analyzed. With the improved online-LASIL method, an Al-doped region, which is only constant for the first 250 nm, was successfully quantified.

Dual Inhibition of the Wnt Inhibitors DKK1 and Sclerostin Promotes Fracture Healing and Increases the Density and Strength of Uninjured BoneAn Experimental Study in Nonhuman Primates.

Fracture repair involves the reactivation of developmental signaling cascades, including Wnt signaling that stimulates bone formation and bone regeneration. Rodent data indicate that dual inhibition of the Wnt signaling antagonists sclerostin and Dickkopf-1 (DKK1) increases callus bone volume and strength while increasing bone mass systemically. We evaluated the effects of 16 weeks of subcutaneously administered carrier solution (vehicle, VEH), anti-sclerostin antibody (Scl-Ab), anti-DKK1 antibody (DKK1-Ab), or Scl-Ab plus DKK1-Ab combination therapy (COMBO) on ulnar osteotomy healing in nonhuman primates (cynomolgus monkeys; 20 to 22 per group). Scl-Ab and COMBO therapy increased systemic markers of bone formation versus VEH, with COMBO leading to synergistic increases versus Scl-Ab or DKK1-Ab monotherapies. The COMBO and Scl-Ab groups showed reduced serum markers of bone resorption versus VEH. The COMBO and DKK1-Ab groups exhibited greater callus bone mineral density (BMD), torsional stiffness, and torsional rigidity versus VEH. Lumbar vertebrae from the Scl-Ab and COMBO groups showed greater BMD and bone formation rate versus VEH, and the femoral mid-diaphysis of the Scl-Ab and COMBO groups showed greater periosteal and endocortical bone formation rates versus VEH. DKK1-Ab increased BMD and strength at the ulnar osteotomy site, Scl-Ab increased bone formation and BMD at uninjured skeletal sites, and Scl-Ab plus DKK1-Ab combination therapy induced all of these effects, in some cases to a greater degree versus 1 or both monotherapies. These results in nonhuman primates suggest that DKK1 preferentially regulates bone healing while sclerostin preferentially regulates systemic bone mass. Combination therapy with antibodies against sclerostin and DKK1 may offer a promising therapeutic strategy for both fracture treatment and fracture prevention.

Ammonia thermal decomposition on quartz and stainless steel walls

Ammonia has been proposed as a promising solution for hydrogen carriers as well as clean fuels. However, the reaction kinetics is still not robust in many engineering applications, where the deviation is mainly caused by the surface reactions of ammonia on the wall. To examine the ammonia surface reaction on engineering materials, in the present study, the thermal decomposition of ammonia is systematically investigated in uniformly heated quartz/SUS304 tubular flow reactors with the prescribed heating length. A decrease in the inner diameter of the quartz tubular reactor leads to an increase in the ammonia thermal decomposition rate, showing that the thermal decomposition reaction occurs even on quartz surfaces, which is usually believed to be inert. The thermal decomposition on the SUS304 reactor surface starts from as low as 700 K, indicating it is much more reactive than the quartz surface. One-step surface reaction models of ammonia for quartz/SUS304 surfaces are proposed, with which the reaction rates are estimated based on the experimental data. The inner surface of the SUS304 tubular reactor after the thermal decomposition experiments is examined by X-ray photoelectron spectroscopy. The formation of iron nitride on SUS304, which in turn facilitates ammonia thermal decomposition, reveals the positive feedback between ammonia decomposition and nitriding. Moreover, the present one-step surface reaction on stainless steel has been validated by measuring ammonia distributions in the preheat zone of NH3/O2/N2 premixed flame impinging on a stainless steel plate through a two-photon absorption laser-induced fluorescence (TALIF) technique.

Probiotic treatment (Enterococcus faecalis) improves symptoms of seasonal allergic rhinitis: A randomized controlled trial.

Probiotic treatment (Enterococcus faecalis) improves symptoms of seasonal allergic rhinitis: A randomized controlled trial.

Hybrid Microfluidic-Flow Injection System for Determining Copper(II) in Aqueous Solution by Homemade Microfluidic-Chip

Background: A new technique was designed for determining copper in an aqueous solution. Copper was determined by a hybrid system microfluidic coupled with flow injection. The homemade microfluidic chip (MFC) is used for injecting copper and 2,9-Dimethyl-1,10-phenanthroline (2,9DMP) reagent as a merging zone technique, whereas uric acid is used as a reducing agent and carrier. Methods: A microfluidic chip was made by a Computer Numerical Control (CNC) laser machine using the AutoCAD application for the study of copper by the hybrid system. The chip contains two microchannels with a volume of 60 μL for copper(II) and 2,9DMP reagent. As a carrier solution and reducing agent, 40 mg/L of uric acid was pumped at a flow rate of 5.2 mL/min. Conditions of the coupled technique and analyses were measured at 454 nm. Results: This system's approach has a linear range, a detection limit (S/N=3), and a quantitation limit (S/N=10) at 0.1-25 mg/L (r2 0.9979), 0.03 and 0.09 mg/L, respectively. Also, repeatability of analyses (n=7) with an average RSD of 0.97 % for concentrations of 5, 10, and 20 mg/L. The dispersion coefficients were 1.977, 1.789, and 1.555 for the three concentrations 5,10, and 20 mg/L, respectively. The recovery of copper in the aqueous solution was estimated to be 103.5%. Dead volume and throughput were zero and 62 per hour, respectively. Sandell’s sensitivity and molar absorptivity were 2.467×10-3 µg/cm2 and 1.947×105 L/mol cm, respectively. Conclusion: The analysis in the novel hybrid microfluidic-flow injection system is efficient, simple, and fast, and it can be used to determine the concentration of copper in an aqueous solution. The homemade microfluidic chip is a low-cost component that uses only an small volume of copper and reagent during analysis.

Resveratrol influences pulmonary mechanics and inflammatory response in a porcine ARDS model

AimsInfluencing the inflammatory response represents an important branch in ARDS research. The naturally occurring polyphenol derivative resveratrol has already been confirmed to have strong anti-inflammatory effects on the cardiac and metabolic system. In the present study, we investigated the propagated anti-inflammatory effects of intravenous resveratrol in a porcine ARDS model. Main methods20 domestic pigs (30 ± 2 kg; approval G20–1-135), divided into three groups: 1. resveratrol high dose (HD; n = 8), single bolus of 20 mg/kg over 15 min. 2. resveratrol low dose (LD; n = 8), single bolus of 10 mg/kg over 15 min. 3. Vehicle (n = 4), with the carrier solution DMSO over 15 min administered after ARDS induction. ARDS induction: using BAL/oleic acid and a subsequent test period of 8 h. Measurement parameters: Hemodynamics/spirometry data were collected continuously, BGA/laboratory parameters repetitively. Post-mortem: analysis of pulmonary inflammatory markers. Statistics: Two-way analysis of variance (repeated measurement) and Student-Newman-Keuls method. Key findingsResveratrol HD significantly reduced the expression of TNF-alpha in lung tissue compared to the LD group (p < 0.05). A significantly increased functional residual capacity (FRC) could be demonstrated for the HD group at the end of the test (p < 0.05 for HD vs. LD/vehicle). Further, resveratrol HD reduced statistically the EVLWI compared to LD/vehicle (p < 0.05 at T4/T8). SignificanceIn this study, resveratrol HD ameliorated pulmonary mechanics as reported for the FRC and EVLWI. Further, the proposed anti-inflammatory effects of resveratrol, a significant reduction in the expression of TNF-alpha was observed in the HD group.

Supercritical fluid coating of flavonoids on excipients enhances drug release and antioxidant activity

Supercritical anti-solvent fluidized bed (SAS-FB) technology can be applied to reduce particle size, prevent particle aggregation, and improve the dissolution and bioavailability of poorly soluble drugs. In this work, drug-loaded microparticles of three similar structures, the flavonoids luteolin (LUT), naringenin (NGR), and dihydromyricetin (DMY) were prepared using SAS-FB technology, to explore its effect on the coating of flavonoid particles. Operating temperature, pressure, carrier, solvent, and concentration of drug solution were investigated for their effects on the yield and dissolution of flavonoid particles. The results showed that temperature, pressure, carrier, and drug solution concentration have a large effect on yield. Within the study range, low supercritical CO2 density at higher temperature and lower pressure, a larger surface area carrier, and moderate drug solution concentration led to a higher yield. The effect of the solvent on the yield of flavonoids is a result of multiple factors. Scanning electron microscopy (SEM) images showed that the drug-loaded particles prepared from different carriers and solvents have different precipitations pattern on the carrier surface, and their particle sizes were smaller than unprocessed particles and those prepared by the SAS process. Fluorescence microscopy (FM) results showed that the flavonoids were uniformly coated on the carrier. X-ray powder diffraction (XRPD) results showed that the crystalline morphology of SAS-FB particles remained unchanged after the SAS-FB process, although the diffraction peak intensity decreased. The cumulative dissolution of SAS-FB particles was more than four times faster in the first 5 min than that of the unprocessed flavonoids. The antioxidant activity of SAS-FB processed LUT, NGR and DMY was 1.89-3.78 times, 4.92-10.68 times and 0.99-2.57 times higher than that of the untreated flavonoids, respectively. The approach provides a reference for the application of SAS-FB technology in flavonoids.

Pancreatic Cancer Cells Undergo Immunogenic Cell Death upon Exposure to Gas Plasma-Oxidized Ringers Lactate.

Survival rates among patients with pancreatic cancer, the most lethal gastrointestinal cancer, have not improved compared to other malignancies. Early tumor dissemination and a supportive, cancer-promoting tumor microenvironment (TME) limit therapeutic options and consequently impede tumor remission, outlining an acute need for effective treatments. Gas plasma-oxidized liquid treatment showed promising preclinical results in other gastrointestinal and gynecological tumors by targeting the tumor redox state. Here, carrier solutions are enriched with reactive oxygen (ROS) and nitrogen (RNS) species that can cause oxidative distress in tumor cells, leading to a broad range of anti-tumor effects. Unfortunately, clinical relevance is often limited, as many studies have forgone the use of medical-grade solutions. This study investigated the efficacy of gas plasma-oxidized Ringer's lactate (oxRilac), a physiological solution often used in clinical practice, on two pancreatic cancer cell lines to induce tumor toxicity and provoke immunogenicity. Tumor toxicity of the oxRilac solutions was further confirmed in three-dimensional tumor spheroids monitored over 72 h and in ovo using stereomicroscope imaging of excised GFP-expressing tumors. We demonstrated that cell death signaling was induced in a dose-dependent fashion in both cell lines and was paralleled by the increased surface expression of key markers of immunogenic cell death (ICD). Nuclear magnetic resonance (NMR) spectroscopy analysis suggested putative reaction pathways that may cause the non-ROS related effects. In summary, our study suggests gas plasma-deposited ROS in clinically relevant liquids as an additive option for treating pancreatic cancers via immune-stimulating and cytotoxic effects.

Simultaneous detection of dopamine and ascorbic acid by using a thread-based microfluidic device and multiple pulse amperometry.

This study presents a novel approach for the simultaneous detection of ascorbic acid (AA) and dopamine (DA) using an affordable and user-friendly microfluidic device. Microfluidic devices, when combined with electrochemical detectors like screen-printed electrodes (SPEs), offer numerous advantages such as portability, high sample throughput, and low reagent consumption. In this study, a 3D-printed microfluidic device called a μTED was developed, utilizing textile threads as microfluidic channels and an unmodified SPE as the amperometric detector. The method employed multiple pulse amperometry (MPA) with carefully selected potential values (+0.65 V and -0.10 V). The reduction current signals generated by dopamine o-quinone were used to calculate a correction factor for the oxidation signals of ascorbic acid, enabling simultaneous quantification. The developed microfluidic device ensured a stable flow rate of the carrier solution at 1.19 μL s-1, minimizing the consumption of samples and reagents (injection volume of 2.0 μL). Under the optimized experimental conditions, a linear range from 50 to 900 μmol L-1 was achieved for both DA and AA. The obtained sensitivities were 2.24 μA L mmol-1 for AA and 5.09 μA L mmol-1 for DA, with corresponding limits of detection (LOD) of 2.60 μmol L-1 and 1.54 μmol L-1, respectively. To confirm the effectiveness of the proposed method, it was successfully applied to analyze AA and DA in a commercial blood serum sample spiked at three different concentration levels, with a medium recovery rate of 70%. Furthermore, the MPA technique demonstrated its simplicity by enabling the simultaneous determination of AA and DA without the need for prior separation steps or the use of chemically modified electrodes.

Synthesis of Vacancy-Controlled Copper Iodide Semiconductor for High-Performance p-Type Thin-Film Transistors.

Copper iodide (CuI) has emerged as a promising p-type semiconductor material owing to its excellent carrier mobility, high transparency, and solution processability. Although CuI has potential for numerous applications, including perovskite solar cells, photovoltaic devices, and thin-film transistors (TFTs), the close relationship between the anion vacancy generation and the charge transport mechanism in CuI-based devices is underexplored. In this study, we propose solution-processed p-type CuI TFTs which were subject to the thermal annealing process in air and vacuum atmospheres at temperatures of 100, 200, and 300 °C. The chemical states and surface morphologies of the CuI thin films were systematically investigated, revealing the generation of iodine vacancy states and the reduction of carrier concentration, as well as increased film density and grain size according to the annealing condition. Further, the effective role of the Al2O3 passivation layer on the electrical characteristics of the solution-processed CuI TFTs is demonstrated for the first time, where the Al2O3 precursor greatly enhanced the electrical performance of the CuI TFTs, exhibiting a field-effect mobility of 4.02 cm2/V·s, a subthreshold swing of 0.61 V/decade, and an on/off current ratio of 1.12 × 104, which exceed the values of CuI TFTs reported so far. Based on the synergistic effects of the annealing process and the passivation layer that engineered the iodine vacancy state and morphology of CuI, the proposed CuI TFTs with the Al2O3 passivation layer showed excellent reliability under 100 times repeated operation and long-term stability over 216 h, where the transfer curves slightly shifted in the positive direction of 1.36 and 1.88 V measured at a current level of 10-6 A for the reliability and stability tests, respectively. Thus, this work opens a new window for solution-processed p-type CuI TFTs with excellent stability for developing next-generation complementary logic circuits.

Biosorption of Cs (I): Utilization of an eco-friendly adsorbent Dry Cowdung Powder

Dry Cowdung Powder (DCP) – a green biosorbent, has been demonstrated for Cs(I) removal from aqueous media using radiotracer technique. 100 mesh DCP was added to Cs(I) carrier solution spiked with radioactive Cs-137. Parameters like pH, biosorbent dose, agitation speed, contact time, temperature and Cs(I) ion concentration were optimized. Industrial effluents or other polluted water bodies contain different salts in varying proportions. To analyse the effect of these salts on adsorption of Cs(I), various sodium, potassium and ammonium salts were used. DCP characteristics pre and post biosorption of Cs(I) was analysed with EDAX spectra. The investigation reports a successful Cs(I) metal removal by following the principles of green chemistry.

Biosorption of Cs (I): Utilization of an eco-friendly adsorbent Dry Cowdung Powder

Dry Cowdung Powder (DCP) – a green biosorbent, has been demonstrated for Cs(I) removal from aqueous media using radiotracer technique. 100 mesh DCP was added to Cs(I) carrier solution spiked with radioactive Cs-137. Parameters like pH, biosorbent dose, agitation speed, contact time, temperature and Cs(I) ion concentration were optimized. Industrial effluents or other polluted water bodies contain different salts in varying proportions. To analyse the effect of these salts on adsorption of Cs(I), various sodium, potassium and ammonium salts were used. DCP characteristics pre and post biosorption of Cs(I) was analysed with EDAX spectra. The investigation reports a successful Cs(I) metal removal by following the principles of green chemistry.

Synergistic epoxidation of palm oleic acid using a hybrid oxygen carrier solution

Synergistic epoxidation of palm oleic acid using a hybrid oxygen carrier solution

Tailoring the density of carbon nanotube networks through chemical self-assembly by click reaction for reliable transistors

Semiconducting single-walled carbon nanotubes (sc-SWNTs) are attracting considerable interest for use as active layers in various electronic applications such as field-effect transistors (FETs) because of their extremely high intrinsic charge carrier mobility and solution processability at low costs. However, it is challenging to achieve a constant sc-SWNT density for ensuring commercial-level, uniform performance in FETs based on random-network SWNT films formed by solution processing. This paper reports a facile method for sorting sc-SWNT and precisely controlling the density of random-network sc-SWNT films by azide-functionalized polymer. The chemical self-assembly of SWNTs is performed between azide-functionalized polymer-wrapped sc-SWNTs and alkyne-based substrate via click reaction. A high-purity sc-SWNT ink is obtained by the conjugated polymer wrapping method using an azide-functionalized polyfluorene in methylcyclohexane. The sc-SWNTs are then chemically bound to a substrate with an alkyne adhesive layer through a Cu-catalyzed azide-alkyne cycloaddition reaction. FETs with dense and uniform SWNT films with a linear density of 30 (±2) tubes μm−1 exhibit markedly high hole mobility of up to 25.4 cm2 V−1 s−1 and excellent performance uniformity. Furthermore, the SWNT films anchored on the substrates are highly resistant to exogenous disruptions, such as sonication in organic solvents, leading the great potential for applications such as biosensors that require strong adhesive strength.