Carboxylic Multi-walled Carbon Nanotubes Research Articles

Preparation and Electrical Properties of Nanocomposite Based on Epoxy Resin and Core-Shell Polyaniline/Multi-Walled Carbon Nanotubes

Nanocomposites of epoxy resin containing various concentrations of carboxylated multiwalled carbon nanotubes (C-MWCNTs) and surface modified C-MWCNTs various concentration of both C-MWCNTs and core-shell nanoparticles were prepared. The physical, mechanical and electrical properties of prepared epoxy nanocomposites were investigated using experimental evaluations such as dynamic mechanical thermal analysis (DMTA), differential scanning calorimeter (DSC), and tensile strength measurements. The results of DSC tests revealed that the introduction of nanoparticles into the epoxy resin did not have much effect on the curing system, and by adding these nanoparticles to the epoxy resin, there is no need to change the curing system. However, the released energy during of epoxy curing show a 24% increase with the introduction of nanofiller into the epoxy matrix. The results of electrical conductivity measurements indicated a higher elastic dielectric constant for nanocomposites up to 200% incomparison with neat epoxy resin. The use of these epoxy nanocomposites in modern electrical and electro-optical industries is of great practical importance.

Environmentally Friendly, Dual-Responsive Actuator Based on Nafion, Carboxylated Multiwalled Carbon Nanotubes, and Polyethylene.

As a type of smart material, flexible stimulus-responsive actuators have become a hot research topic nowadays. However, flexible actuators responding to a single stimulus source are susceptible to external perturbations, which may lead to an unstable function or even failure. Therefore, in this paper, we proposed a bilayer actuator that can be driven by both humidity and light by combining the humidity-sensitive Nafion, carboxylated multiwalled carbon nanotubes (cMWCNT) with excellent photothermal conversion properties, and commercial polyethylene (PE) tape with good humidity insensitivity and thermal expansion. First, the cMWCNT-Nafion film was prepared by a solution casting method and bonded together with PE tape to obtain a bilayer actuator. Then, the effects of the cMWCNT mass fraction and film thickness on the humidity and light response performance of the bilayer actuator were investigated. The optimal ratios of raw materials were obtained for different stimulation sources, respectively. Furthermore, the performance of the bilayer actuator with the optimal ratios was tested; it was verified that the proposed dual-responsive actuator can realize different degrees of bending deformation under different relative humidity (RH) and ultraviolet (UV) light intensity with good stability. Finally, the application potential in multiple scenarios was further verified by applying the prepared cMWCNT-Nafion/PE bilayer actuator to a smart window, crawling robot, and flexible gripper. This paper will provide a meaningful reference for the development and performance optimization of high-performance dual-responsive actuators.

Highly Specific Non-Enzymatic Electrochemical Sensor for the Detection of Uric Acid Using Carboxylated Multiwalled Carbon Nanotubes Intertwined with GdS-Gd2O3 Nanoplates in Human Urine and Serum.

Herein, the electrochemical sensing efficacy of carboxylic acid functionalized multiwalled carbon nanotubes (C-MWCNT) intertwined with coexisting phases of gadolinium monosulfide (GdS) and gadolinium oxide (Gd2O3) nanosheets is explored for the first time. The nanocomposite demonstrated splendid specificity for nonenzymatic electrochemical detection of uric acid (UA) in biological samples. It was synthesized using the coprecipitation method and thoroughly characterized. The presence of functional groups and disorder in the as-synthesized nanocomposite are confirmed using Fourier transform infrared spectroscopy and Raman spectroscopy. Furthermore, field emission scanning electron microscopy, high-resolution transmission electron microscope, X-ray powder diffraction, and X-ray photoelectron spectroscopy provides a clear understanding of the morphology, coexisting phases, and elemental composition of the as-synthesized nanocomposites. The differential pulse voltammetry technique was utilized to elaborate the electrochemical sensing of UA using a GdS-Gd2O3/C-MWCNT modified glassy carbon electrode (GCE), The sensor showed an enhanced current response by more than 2-fold compared to bare GCE. Also, the sensor's performance was further improved by dispersing the nanocomposite in an ionic liquid with the exceptional reproducibility (SD = 0.0025, n = 3). The fabricated UA sensor GdS-Gd2O3/C-MWCNT/IL/GCE demonstrated a wide linear detection range from 0.5-30 μM and 30-2000 μM, effectively covering the entire physiological range of UA in biological fluids with a limit of detection (LOD) of 0.380 μM (+3SD of blank) and a sensitivity of 356.125 μA mM-1 cm-2. Moreover, the electrodes exhibited storage stability for 2 weeks with decrease in zero-day current by only 4.5%. The sensor was validated by quantifying UA in 12 unprocessed clinical human urine and serum samples, and its comparison with the gold standard test yielded remarkable results (p < 0.05). Hence, the proposed nonenzymatic electrochemical UA sensor is selective, sensitive, reproducible, and stable, making it reliable for point-of-care diagnostics.

Printed flexible supercapacitors utilizing composites of MWCNT/MOF ultrathin nanosheets: Exploring 1D/2D structural adjustment

The self-stacking propensity of metal–organic frameworks (MOFs) during synthesis, combined with their intrinsic limitations in electrical conductivity and mechanical stability, constrains their utility as high-capacity energy sources in wearable electronics. Here, we employ a surfactant-assisted method to mitigate the Z-axis stacking of zinc metalloporphyrin organic frameworks (NMOFs), yielding ultrathin two-dimensional (2D) material sheets. By integrating carboxyl multiwalled carbon nanotubes into these nanosheets (denoted as C-NMOF-x), the lamellar structure of MOF is preserved while promoting the formation of rich multistage micropores and continuous conductive channels. This structural refinement remarkably enhances electrochemical properties, including capacitance, electronic conductivity, and cycling stability. Leveraging synergistic interactions, the resulting C-NMOF-4 composite achieves a specific capacitance of 0.152 mAh/g in a three-electrode system at a current density of 1 A/g. Furthermore, the modulated C-NMOF-4 composites are successfully formulated into homogeneous e-inks suitable for dispensing printing, enabling the mass production of flexible micro-supercapacitors (MSCs). Notably, these MSCs maintain 95 % of their capacitance even after 180° bending under wearable conditions. This surface and interface microstructure modulation strategy holds promise for enhancing the synergistic coupling effects of 2D materials and offers new avenues for the application of innovative 2D materials in wearable electronics.

Biobased, degradable and directional porous carboxymethyl chitosan/lignosulfonate sodium aerogel-based piezoresistive pressure sensor with dual-conductive network for human motion detection

The rapid growth of wearable electronics, healthcare monitoring, and human–computer interaction has sparked growing interest in flexible piezoresistive pressure sensors, which in turn raised considerable concerns about the increasingly serious environmental pollution caused by electronic waste. Herein, a radial inward directional freezing-drying method was proposed to prepare biobased, degradable and directional porous carboxymethyl chitosan/lignosulfonate sodium aerogel with dual-conductive network constructed by carboxylated multiwalled carbon nanotubes (C-CNTs) and MXene for piezoresistive pressure sensor. Owing to the synergistic conductive network of C-CNTs and MXene as well as directional porous structure, the sensor exhibited high sensitivity (2.33 kPa−1 in 0–10 kPa, 1.04 kPa−1 in 10–31 kPa, 0.53 kPa−1 in 31–53 kPa), fast response (response/recovery time of 140/60 ms), and excellent repeatability (2,000 loading–unloading cycles). Moreover, the sensor was successfully applied for human motion detection, healthy monitoring, micro-expression identification, and speech recognition. In addition, the aerogel for sensor was able to be completely degraded within 70 h in 1 M hydrochloric acid solution or partially degraded in boiling water within 2.5 h for the recycling of conductive materials, which was beneficial for not only environment protection but also saving resource. Our findings conceivably stand out as a new strategy to prepare environmentally friendly and high-performance piezoresistive pressure sensor and will promote the further development and application of flexible electronics.

Molecular Insights into the Binding and Conformational Changes of Hepcidin25 Blood Peptide with 4-Aminoantipyrine and Their Sorption Mechanism by Carboxylic-Functionalized Multiwalled Carbon Nanotubes: A Comprehensive Spectral Analysis and Molecular Dynamics Simulation Study.

In this work, the main purpose is to analyze and understand the mechanism and thermodynamic interactions of carboxylic acid-functionalized multiwalled carbon nanotubes (cf-MWCNTs) and 4-aminoantipyrine (AAP) with human hepcidine25 (Hep25) using multispectroscopic and molecular docking modeling methods, binding free energy calculations, and molecular dynamics (MD) simulations under physiological conditions. AAP belongs to a class of persistent environmental contaminants, and its residue is a potential hazard to human health, exhibiting a high binding affinity with blood peptides. Hepcidin is a 25-residue peptide hormone with four disulfide bonds that regulates the iron balance in vertebrates and contributes to host immunity as a cysteine-rich antimicrobial peptide. Due to their diverse properties and pollutant absorption capabilities, CNTs demonstrate important biological effects in biological applications, particularly in the noncovalent interactions with blood peptides. A comprehensive molecular dynamics simulation integrated with molecular docking methodologies was employed to explore the binding free energy between AAP and Hep25, identify binding sites, elucidate thermodynamic characteristics, and evaluate the binding forces governing their interaction. The investigation delved into elucidating the precise binding site of AAP within the Hep25 protein and thoroughly analyzed the impact of AAP on the microenvironment and conformational dynamics of Hep25. The circular dichroism (CD) experimental results highlight a reduction in β-sheet composition following the introduction of AAP and cf-MWCNT. In addition, outcomes from fluorescence spectroscopy demonstrate that both cf-MWCNT and AAP significantly attenuated Hep-25 fluorescence via a static quenching mechanism. According to the MD simulations, the presence of AAP induces changes in the secondary structure of Hep25 and enhances its hydrophobicity. Additionally, our findings demonstrated that alongside the alteration in protein structure and functionality induced by contaminants, cf-MWCNTs possess the capability to mitigate the contaminant-induced effects on Hep25 activity while preserving the overarching structural integrity of Hep25. Based on the distance and RDF data, we found that during the simulation the presence of the cf-MWCNT causes the AAP to move away from the Hep25, and as a result fewer and weaker interactions of the AAP with the Hep25 will be observed. Likewise, free energy calculations indicate that the binding of Hep25 to AAP and cf-MWCNT involves electrostatic, π-cationic, and π-π stacking interactions. The research findings offer invaluable insights into the intricate influence of pollutants and carbon nanotubes on protein functionality within the circulatory system and their toxicity in vivo for prospective investigations.

Studies on Recovery of Performance of Fouled Nanocomposite Ultrafiltration Membranes on Cleaning after Treatment of Oil–Water Emulsions

Herein, we discussed the pure water flux recovery of carbon based nanofillers embedded polyvinyl chloride nanocomposite membranes after physical cleaning through backwashing &amp; flushing with flow reversal and after chemical cleaning using hydrochloric acid and caustic soda. The water flux recovery by backwashing is more than that by forward flushing for all the membrane but it is more effective in carbon black (CB) &amp; graphitized carbon black (GCB) carbon-based membranes than relatively hydrophilic multiwalled carbon-nanotube (MWCNT) &amp; carboxylated multiwalled carbon-nanotube (CMWCNT) based nanocomposite membranes. The highest water flux recovery was found ~96% for nanocomposite membranes by backwashing and caustic soda cleaning. The combination of backwashing and caustic soda cleaning could be the most effective method of cleaning of oil-water fouled membranes to restore the maximum water flux.

A high Q-factor evanescent field fiber sensor coated with C-MWCNT for label-free HPV determination

A high Q-factor evanescent field fiber sensor is designed based on a fiber Bragg grating (FBG) coated with carboxylic multi-walled carbon nanotubes (C-MWCNT). In a high-reflectivity FBG, multiple cladding modes are stimulated as the forward-moving guided mode within the core of the multimode fiber is coupled to the FBG’s reverse-moving guided mode within the cladding. Our evanescent field fiber sensor is highly sensitive to the refractive index without altering the architecture of fiber or deviating from the conventional process of fabricating fiber gratings. The proposed sensor exhibits a full-width at half maximum (FWHM) of 78 pm and a Q-factor of 1.9 × 104 for its standard cladding-mode resonance, outperforming the majority of reported evanescent field fiber sensors in these parameters. Furthermore, by coating C-MWCNT on the fiber sensing surface, our sensor has been demonstrated to combine multiple functions into one, such as label-free determination of human papilloma virus (HPV) DNA sequences, the measurement of different concentrations, and mispairing discrimination. The sensor design put forward offers a compelling technique within the realm of optical fiber sensing for refractive index and label-free biomolecule detection.

Evaluation of the tensile strength and impact property of polyamide/short glass fibre-multi-walled carbon nanotube composites: an experimental study based on response surface method

The tensile strength, impact property and thermal stability of polyamide 6 (PA6) reinforced with carboxylic acid-functionalised multi-walled carbon nanotubes (MWCNTs) with 1 and 2 wt.%, and short glass fibre (SGF) with 10 and 20 wt.%, were investigated. The morphological properties were examined by SEM. The differential scanning calorimetry (DSC) was also carried out to explore the thermal stability and crystallinity of nanocomposites. For determining the optimal weight percentage of reinforcements, the response surface methodology (RSM) was used. The effect of nanotubes and weight percentages of fibre on the tensile and impact properties was investigated by analysis of variance. The results indicated that the incorporation of MWCNTs to PA6 increased the tensile and impact strength of the matrix by 16% and 24%, respectively. Also, the addition of SGFs to polyamide improved the mechanical properties. The results also showed that the nanocomposite containing 1 wt.% MWCNTs and 20 wt.% SGFs had the highest properties (66% increase for tensile and 81% increase for impact strength compared to neat PA6). The DSC results confirmed the effect of reinforcements on thermal characteristics of nanocomposites. The validation of output models of responses implies the ability of models to predict the tensile and impact behaviour of composites.

Electrochemical sensor based on silver nanoparticles/ carboxylated multi-walled carbon nanotubes modified glassy carbon electrode for detection of carbamate pesticide in food

Electrochemical sensor based on silver nanoparticles/ carboxylated multi-walled carbon nanotubes modified glassy carbon electrode for detection of carbamate pesticide in food

Polycaprolactone-Based Composite Electrospun Nanofibers as Hybrid Biomaterial Systems Containing Hydroxyl- or Carboxylic Acid-Functionalized Multiwall Carbon Nanotubes

Composite electrospun nanofibers based on polycaprolactone (PCL) have shown promise in various biomedical applications due to their unique properties. This study investigates the effects of incorporating hydroxyl (–OH)- or carboxylic acid (–COOH)-functionalized multiwall carbon nanotubes (MWCNTs) into PCL matrices. Two types of functionalized additives, MWCNT-OH and MWCNT-COOH, were used at different concentrations (0.06 and 0.12 wt%). Various characterization techniques including FTIR, XRD, AFM, SEM, water contact angle analysis, and tensile strength testing were employed to evaluate changes in nanofiber morphology, crystallinity, surface topography, wettability, and mechanical properties. In addition, in vitro cytotoxicity assays were conducted using HUVECs and L929 fibroblasts over 1-, 3-, and 5-day intervals. This study represents a novel examination of (–OH)- and (–COOH)-functionalized MWCNTs as additives in electrospun PCL biopolymer matrices. The findings indicate that incorporating small amounts of (–OH)- or (–COOH)-functionalized MWCNTs enhances the physicochemical characteristics of PCL nanofibers, making them more suitable for biomedical applications. While both types of functionalized MWCNT additives improved properties compared to pure PCL nanofibers, (–COOH)-functionalized MWCNT-incorporated nanofibers exhibited the most favorable features. In conclusion, this research highlights the potential of tailored PCL-based composite nanofibers containing functionalized MWCNTs as advanced biomaterial systems for biomedical applications, contributing to the development of innovative biomaterials for diverse biomedical contexts.

Lightweight carbon nanotube/aramid nanofiber aerogel with superior electromagnetic wave absorption, thermal insulation, and flame resistance

Carbon nanotubes, presenting distinguished electromagnetic wave (EMW) loss capacity and light-weight advantage, are promising candidates for EMW absorption materials. However, poor dispersibility, inadequate processibility, and excessive permittivity leading to impedance mismatch limit the application of carbon nanotubes. Herein, branched aramid nanofiber (ANF) acting as a surfactant, gelling agent, and electromagnetic parameter regulator is utilized to ameliorate the performances of carboxylic multi-walled carbon nanotube (c-MWCNT). The c-MWCNT/ANF aerogels with anisotropic structures are assembled through electrostatic-repulsion-assisted dispersion, hydrogen-bond-induced gelation, unidirectional freezing, and freeze-drying. By adjusting the proportion of c-MWCNT and ANF to optimize the impedance matching and electromagnetic parameters, the composite aerogel with ultralow density (∼26.2 mg cm−3) shows an extraordinary minimum reflection loss of −60.43 dB and a maximum effective absorption bandwidth of 5.34 GHz along the vertical direction of oriented channels. Moreover, benefiting from high porosity and remarkable thermal stability, the aerogels possess prominent thermal insulation and flame resistance. This work provides a strategy for the advanced EMW absorption materials, which have great potential value for aerospace applications under harsh environments.

Optimization, validation, and application of a liquid chromatography-tandem mass spectrometry method for the determination of 47 banned drug and related chemical residues in livestock urine using graphitized carboxyl multi-walled carbon nanotubes-based QuEChERS extraction

The establishment of an efficient method for the analysis of drug residues in animal urine facilitates the real-time monitoring of drugs used in the production of animal-derived food. A modified QuEChERS extraction–liquid chromatography-tandem mass spectrometry (LC–MS/MS) method was established for the determination of 47 banned drug and related chemical residues in livestock urine. The sample was extracted with acetonitrile by converting the acid-base environment. The sample cleanup effects of seven solid phase extraction cartridges and two EMR-Lipid products were compared, and three materials, including graphitized carboxyl multi-walled carbon nanotubes (MWCNTs), PSA, and C18, were selected as QuEChERS adsorbents from 24 materials. All analytes showed good linearity, with correlation coefficients (R2) greater than 0.9936. Low limits of quantification could be obtained, ranging from 0.2 to 5.5 ng/mL. The average recoveries at low, medium, and high spiked levels were in the range of 70.8–114.9 %, with intra-day precision ranging from 2.4 % to 11.2 % and inter-day precision ranging from 4.5 % to 16.1 %. Swine urine and bovine urine samples collected from different farms were effectively analyzed using the developed method, and metronidazole was detected in three swine urine samples.

Co/P co-doped bamboo-based woodceramics with a sandwich structure modified by carbon nanotube electrodeposition as supercapacitor electrodes

Exploring new electrode structures and co-doped composite biomass material electrodes is considered to be an effective way of developing cheap, efficient carbon-based supercapacitors. A bamboo-based sandwich-structured matrix was prepared from thin bamboo veneer and bamboo fiber by pretreatment with H3PO4 and Co2+-catalyzed graphitization. The pore structure was modulated by hydrothermal activation with NaOH and electrodeposition of carbon nanotubes (CNTs) to obtain CNTs modified, Co/P co-doped sandwich-structured woodceramics electrode (CNT@Co/P). It not only has an obvious sandwich structure, but also retains the natural structural characteristics of bamboo. The specific capacitance of the resulting electrode (CNT@Co/P-20) is as high as 453.72F/g using 1 wt% of carboxylated multi-walled carbon nanotubes (CMWCNT) solution as the deposition electrolyte at a current density of 0.2 A/g for 20 min at room temperature. When the power density is 500 W/kg, the energy density reaches 21.3Wh /kg, showing a good electrochemical performance.

Redox-active cerium-based metal–organic layers coordinated on carbon nanotubes as materials for supercapacitors

In this work, the redox-active, two-dimensional (2D), and highly dispersible metal–organic layers (MOLs) constructed from hexa-cerium(IV) clusters, CeBTB (BTB = 1,3,5-benzenetribenzoate), were directly coordinated onto the surface of carboxylic acid-functionalized multi-walled carbon nanotubes (CNTs) by utilizing a post-synthetically grafting approach. Nanocomposites with various MOL-to-CNT ratios can be synthesized. Crystallinity, porosity, morphology, electrical conductivity, and electrochemical behaviors of CeBTB and all nanocomposites as well as the chemical interaction between CeBTB and CNT in the composite are investigated. Thin films of materials with the same mass loading are then fabricated for measuring their capacitive performances in neutral aqueous solutions of Na2SO4. With the electrical conductivity provided by carbon nanotubes and the redox activity of CeBTB between Ce(IV) and Ce(III), the optimal CeBTB-CNT nanocomposite can show a better capacitive performance compared to the pristine CeBTB, pristine CNT, and the physical mixture of both of them with the same MOL-to-CNT ratio. With such a simple post-synthetically grafting approach that can precisely control the ratio between the 2D MOLs and CNTs, the findings here open opportunities for designing numerous composites composed of MOLs and nanocarbons with tunable conductivity, redox activity, and functionality, which are potential candidates for a range of applications.

Tailoring molecular structures for enhanced anchoring of polysulfides in lithium–sulfur batteries

Lithium–sulfur (Li–S) batteries, with promising potential for high energy density, remain compelling candidates for next-generation energy storage systems. However, they still suffer from huge challenges such as severe shuttle effects and sluggish redox kinetics. A strategic approach involves the meticulous design of host materials at the molecular level, emphasizing the construction of efficient sulfiphilic organic molecules as anchoring sites for lithium polysulfides (LiPS). In this study, a series of benzamides (benzamide, 2-fluorobenzamide, and 2,6-difluorobenzamide) are introduced onto carboxylic multiwalled carbon nanotubes (C-CNT) to graft sulfur hosting materials with tailored functional interfaces for Li–S batteries. Through a comparative study, we identify the semi-ionic C−F bond and carbonyl functional group as active centers, presenting a synergistic strategy via Li···O and Li···F bonds for anchoring LiPS. The optimized cathode material of sulfur-based carbon nanotubes grafted with 2-fluorobenzamide exhibits outstanding electrochemical activity, achieving a high reversible capacity of 944.8 mAh/g under a high sulfur loading (5.5 mg cm−2) and low electrolyte usage (8 µL mg−1). Our study underscores the potential of tailoring the molecular structure of host materials to effectively immobilize LiPS for high-performance Li–S batteries.

High thermal conductivity regenerated cellulose/carboxylated carbon nanotubes composite films with semi-insulating properties prepared via ionic coordination and hydrothermal synthesis of zinc oxide

With the rapid development of miniaturization and integration of electronic products, its heat dissipation has become the focus of research. In order to improve the heat dissipation efficiency of electronic components, flexible thermal conduction materials are constantly studied. Cellulose has good flexibility and load capacity, which is often used in the preparation of thermal conduction materials. In this paper, carboxylated multi-walled carbon nanotubes (C-MWCNTs) were modified by metal ion coordination and hydrothermal synthesis of zinc oxide (ZnO) to prepare semi-insulating thermal conduction fillers, which were dispersed into regenerated cellulose (RC) to cast to be composite films. The results show that the two modification methods can reduce the probability of phonon scattering and block the electron transport path, so as to improve the thermal conductivity (TC) and electrical insulation properties of the composite films. Especially for the RC/C-MWCNTs@ZnO composite films, when the total filler content is 20 wt%, the in-plane TC can reach 11.89 ± 0.19 (W/(m·K)), and the surface electrical resistivity (ρs) is (5.24 ± 0.17) × 106 Ω. Compared with the RC/C-MWCNTs composite films, the in-plane TC and ρs of the RC/C-MWCNTs@ZnO composites films are increased by about 94.92 % and 555 %, respectively. Therefore, the developed RC-based composite film has broad application prospects in thermal management.

An ultra-sensitive ammonia sensor based on a quartz crystal microbalance using nanofibers overlaid with carboxylic group-functionalized MWCNTs.

Detecting ammonia at low concentrations is crucial in various fields, including environmental monitoring, industrial processes, and healthcare. This study explores the development and performance of an ultra-sensitive ammonia sensor using carboxylic group-functionalized multi-walled carbon nanotubes (f-MWCNTs) overlaid on polyvinyl acetate nanofibers coated on a quartz crystal microbalance (QCM). The sensor demonstrates high responsiveness, with a frequency shift response of over 120 Hz when exposed to 1.5 ppm ammonia, a sensitivity of 23.3 Hz ppm-1 over a concentration range of 1.5-7.5 ppm, and a detection limit of 50 ppb. Additionally, the sensor exhibits a rapid response time of only 14 s, excellent selectivity against other gases, such as acetic acid, formaldehyde, methanol, ethanol, propanol, benzene, toluene, and xylene, and good stability in daily use. These characteristics make the sensor a promising tool for real-time ammonia detection in diverse applications.

Ultra-stretchable, sensitive and breathable electronic skin based on TPU electrospinning fibrous membrane with microcrack structure for human motion monitoring and self-powered application

With the rapid development of wearable electronic, electronic skin with excellent performance for human motion detection have been widely investigated recently. In this work, a multifunctional electronic skin with three-dimensional conductive network skeleton was prepared based on synergistic conductive filler (carboxylated multi-walled carbon nanotubes (C-MWCNT) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonic acid) (PEDOT:PSS)) decorated breathable thermoplastic polyurethane (TPU) electrospinning fibrous membrane. Then, microcrack structure was constructed via pre-stretching and the strain sensitivity of the resultant C-MWCNT/PEDOT:PSS/TPU (CPT) conductive fibrous membrane could be effectively adjusted by changing the microcrack density. Due to the three-dimensional conductive network skeleton, microcrack structure and the bridging effect of C-MWCNT between the adjacent crack fragments, ethylene glycol treated CPT (mass ratio of C-MWCNT and PEDOT:PSS is 9/1) (e-CPT9/1) strain sensor exhibited high sensitivity (6008.3), wide response range (680 %), fast response/recovery time (200 ms/200 ms), low detection limit (0.5 %), excellent durability and repeatability (6000 cycles). The excellent strain sensing performances enables it to accurately monitor motion activities and physiological signals, and can also be used as a smart sensing glove to identify different letters gesture and numeric gestures. Furthermore, owing to the photothermal conversion ability and thermoelectric effect of C-MWCNT and PEDOT:PSS, the obtained e-CPT9/1 device also displayed efficient “light-thermal-electric” conversion ability and showed the great potential as self-powered strain sensor.

Photo-cured phase change energy storage material with photo-thermal conversion, self-cleaning and electromagnetic shielding performances via the lamellar structure strengthened by segment rearrangement of dynamic disulfide bond

At present, phase change materials (PCMs) with single function hardly meet the needs of advanced intelligent materials in practical applications, and the multifunction integration is the current trend. However, photo-cured multifunctional PCMs are hampered by insufficient transparency due to adding functional fillers, such as carbon and metal materials. The novel strategy is necessary to overcome this limitation. Here, a photo-cured multifunctional PCM is prepared by using the design of a lamellar structure composing the photo-cured phase change polymer layer and the functional fillers layer. The curing of the phase change polymer is realized by the photo-induced "thiol-ene" click reaction, and reversible dynamic disulfide bonds are introduced into the PCM, which not only gives the phase change crosslinked network reprocessability, but also strengthens the interface layer by the chain rearrangement to form a stable composite structure. The carboxylated multiwalled carbon nanotubes (CCNTs) and silver nanowires (AgNWs), as functional fillers, give the PCM photo-thermal conversion, self-cleaning and electromagnetic shielding (EMI SE) performances. Its phase change latent heat and photo-thermal conversion can reach 105.2 J/g and 78.5%, and the water contact angle is 142° with self-cleaning performance. In addition, due to the dense and well-developed conductive path formed by AgNWs layer on the PCM surface, the EMI SE effect can reach 39 dB with only 6.3% (in mass) filler content and 7.2% phase change latent heat loss. As far as we know, this is the first report about photo-cured PCMs with self-cleaning, photo-thermal conversion and EMI SE performances.