Transition Metal Carbonyl Complexes Research Articles

Reduction of CO to Methanol with Recyclable Organic Hydrides.

The reaction steps for the selective conversion of a transition metal carbonyl complex to a hydroxymethyl complex that releases methanol upon irradiation with visible light have been successfully quantified in acetonitrile solution with dihydrobenzimidazole organic hydride reductants. Dihydrobenzimidazole reductants have been shown to be inactive toward H2 generation in the presence of a wide range of proton sources and have been regenerated electrochemically or photochemically. Specifically, the reaction of cis-[Ru(bpy)2(CO)2]2+ (bpy = 2,2'-bipyridine) with one equivalent of a dihydrobenzimidazole quantitatively yields a formyl complex, cis-[Ru(bpy)2(CO)(CHO)]+, and the corresponding benzimidazolium on a seconds time scale. Kinetic experiments revealed a first-order dependence on the benzimidazole hydride concentration and an unusually large kinetic isotope effect, inconsistent with direct hydride transfer and more likely to occur by an electron transfer-proton-coupled electron transfer (EΤ-PCET) or related mechanism. Further reduction/protonation of cis-[Ru(bpy)2(CO)(CHO)]+ with two equivalents of the organic hydride yields the hydroxymethyl complex cis-[Ru(bpy)2(CO)(CH2OH)]+. Visible light excitation of cis-[Ru(bpy)2(CO)(CH2OH)]+ in the presence of excess organic hydride was shown to yield free methanol. Identification and quantification of methanol as the sole CO reduction product was confirmed by 1H NMR spectroscopy and gas chromatography. The high selectivity and mild reaction conditions suggest a viable approach for methanol production from CO, and from CO2 through cascade catalysis, with renewable organic hydrides that bear similarities to Nature's NADPH/NADP+.

Molybdenum-Mediated Insertion of Ketones into the P-P bond of cyclo-(P5Ph5) and Formation of Trinuclear Molybdenum Complexes.

The reaction of cyclopentaphosphine cyclo-(P5Ph5) (1) with ketones (acetone and cyclooctanone) in the presence of [Mo(CO)4(cod)] (cod = cycloocta-1,5-diene) led to the air-stable trinuclear complexes in which the bis-phosphanido ligands (PPhPPh-PPh-PPh-CMe2O-PPh)2- (complex 2) and (PPh-PPh-PPh-PPh-C(CH2)7O-PPh)2- (complex 3) bridge a Mo(CO)3-Mo(CO)3 unit. This extends the reaction of 1 with transition metal carbonyl complexes to further substrates and represents the first examples of the carbonyl compounds insertion into the P-P bond of cyclic oligophosphorus compounds. Complexes 2 and 3 have been characterized by 31P NMR spectroscopy and single crystal X-ray diffraction. Furthermore, the thermal properties of the obtained complexes have been studied by differential scanning calorimetry (DSC) and fast scanning calorimetry (FSC).

Metal-Metal Bonding in Late Transition-Metal [M2L5] Complexes: Exploring the Limits of the Isolobal Analogy between the CO and AlCp* Ligands.

Late dinuclear transition-metal (especially group 10 and 11) homoleptic carbonyl complexes are elusive species and have so far not been isolated. A typical example is the 30-electron species [Ni2(CO)5], the structure and bonding of which is still debated. We show that, by using the AlCp* ligand (isolobal to CO), it is possible to isolate and fully characterize [Ni2(AlCp*)5] (1), which inspired us to revisit by DFT calculations, the bonding situation within [Ni2L5] (L = CO, AlCp*) and other isoelectronic species. The short Ni-Ni X-ray distance in 1 (2.270 Å) should not be attributed to the existence of a typical localized triple-bond between the metals, but rather to a strong through-bond interaction involving the three bridging ligands via their donating lone pairs and accepting π* orbitals. In contrast, in the isostructural 32-electron [Au2(AlCp*)5] (2) cluster an orbital with M-M antibonding and Al...Al bonding character is occupied, which is in accordance with the particularly long Au-Au distance (3.856 Å) and rather short Al...Al contacts between the bridging ligands (2.843 Å). This work shows that, unlike late transition-metal [M2(CO)x] species, stable [M2(AlCp*)x] complexes can be isolated, owing to the subtle differences between CO and AlCp*. We propose a similar approach for rationalizing the bonding in the emblematic 34 electron species [Fe2(CO)9].

Corrigendum to: Application of a novel gas phase synthesis approach to carbonyl complexes of accelerator-produced 5d transition metals (Radiochim. Acta 2022; 110 (2): 75–86)

Article Corrigendum to: Application of a novel gas phase synthesis approach to carbonyl complexes of accelerator-produced 5d transition metals (Radiochim. Acta 2022; 110 (2): 75–86) was published on January 30, 2023 in the journal Radiochimica Acta (volume 0, issue 0).

Probing the Determinability of Meaningful Rate Constant Values in Solvent–Ligand Exchange Reactions in Metal Carbonyl Complexes

This communication describes an activity where upper-level chemistry students explore the determinability of rate constant values without concentration dependences (ktrue) related to a solvent–ligand exchange in a transition metal carbonyl complex. By performing a series of multivariable linear regression (MVLR) analyses of experimentally determined rate constant values (kobsd), students, in general, were able to grasp the notion that none of the values of the ktrue involved in the described kinetics scenario can be determined individually or collectively with reasonable accuracy due to the existence of linear correlations between the independent variables (solvent concentrations). Moreover, in this inquiry-based activity, coins were used as manipulatives to show the proof of concept that MVLR can still provide reliable individual ktrue values when the correlation between the independent variables is removed.

Carbon Monoxide in Main-Group Chemistry.

The usage of carbon monoxide (CO) as a C1 feedstock for carbonylation has been an important subject of numerous studies for over a century. The chemistry in this field has evolved significantly, and several processes (e.g., Fischer-Tropsch, Monsanto, and Cativa process) have even been industrialized to serve humankind in our daily lives. CO is also a crucial ligand (carbonyl) in organometallic chemistry, and transition-metal carbonyl complexes have been widely used as homogeneous catalysts in various chemical transformations. Historically, transition-metal carbonyls have been considered to be dominant for these purposes. In recent decades, main-group elements, especially naturally abundant elements in the Earth's crust such as silicon and aluminum, have gained much attention, as they are eco-friendly and have low toxicity compared to the late transition metals. Recent developments in main-group chemistry have revealed reactivity which can mimic that of transition-metal complexes toward small molecules such as H2, alkenes, and alkynes, along with carbon monoxide. This Perspective highlights CO activation by main-group compounds which leads to the formation of carbonyl complexes or CO insertion into the main-group element center as well as the reductive homologation of CO.

Application of a novel gas phase synthesis approach to carbonyl complexes of accelerator-produced 5d transition metals

Abstract In 2014 the first synthesis of a transactinide carbonyl complex – seaborgium hexacarbonyl – was reported. This was achieved in gas-phase chemical experiments in a beam-free environment behind the recoil separator GARIS. Extending this work to heavier elements requires more efficient techniques to synthesize carbonyl complexes as production rates of transactinide elements drop with increasing atomic number. A novel approach was thus conceived, which retains the benefit of a beam-free environment but avoids the physical preseparation step. The latter reduces the yields for products of asymmetric reactions such as those used for the synthesis of suitable isotopes of Sg, Bh, Hs and Mt. For this a series of experiments with accelerator-produced radioisotopes of the lighter homologues W, Re and Os was carried out at the tandem accelerator of JAEA Tokai, Japan. A newly developed double-chamber system, which allows for a decoupled recoil ion thermalization and chemical complex formation, was used, which avoids the low-efficiency physical preseparation step. Here, we demonstrate the feasibility of this newly developed method using accelerator-produced short-lived radioisotopes of the 5d homologues of the early transactinides.

Variational Energy Decomposition Analysis of Charge-Transfer Interactions between Metals and Ligands in Carbonyl Complexes.

Variational energy decomposition analyses have been presented to quantify the σ-dative, ligand-to-metal forward charge transfer (CT) and the π-conjugative, metal-to-ligand backward charge delocalization on a series of isolelectronic transition-metal carbonyl complexes M(CO)6, including M = Ti2-, V-, Cr, Mn+, and Fe2+. Although the qualitative features of these energy terms are understood, well-defined quantitative studies have been scarce. Consistent with early findings, electrostatic and Pauli exchange effects play a key role in σ-donation, resulting in blue shifts in ligand vibrational frequency in the complex geometries. Excluding chemical bonding interactions between the CO ligand and the metal fragments in the energy decomposition analysis, we found that loosely bound electrostatic complexes can be formed at a longer metal-to-ligand distance due to the exponential decay of Pauli exchange. In all complexes, the overall binding stabilization can be attributed to CT effects, with opposing trends between σ-donation and π-back bonding that follows an order of Ti2- (4.4) > V1- (2.6) > Cr (1.5) > Mn1+ (1.1) > Fe2+ (0.5) in π-to-σ CT ratio. These electronic and energetic features are mirrored in the vibrational frequency shifts induced by different factors. The present investigation may help stimulate the use of energy decomposition techniques to understand the structure and activity of metallocatalysts using density functional theory.

Precise Identification of the Dimethyl Sulfoxide Triggered Tricarbonyldichlororuthenium(II) Dimer for Releasing CO.

Low concentrations of carbon monoxide (CO) can play vital roles in pharmacological and physiological functions in the human body. The transition-metal carbonyl complexes of the tricarbonyldichlororuthenium(II) dimer [Ru2(CO)6Cl4 (CORM-2)] were proposed as CO-releasing molecules (CORMs) to improve the delivery efficiency of CO for therapeutic effects. The accurate identification of final products for CORMs in solution and the detailed mechanisms of the release of CO were the essential prerequisite for its effective physiological application, which have been deficient. In this study, utilizing the cutting-edge two-dimensional (2D) IR spectroscopy, with the intrinsic vibrational modes and the coupling information on dynamics of intramolecular vibrational energy redistribution (IVR), the final products of A, B, C, and E are accurately identified when CORM-2 is dissolved in dimethyl sulfoxide (DMSO). Furthermore, with the clues on intermolecular interaction and chemical exchange dynamics between different products, the transformations between different products are also directly characterized for the first time. These findings challenge the results from the classic 1D spectroscopic pattern, and they evidently demonstrated that the release of CO from CORM-2 in DMSO was slow and complicated with multiple reaction pathways. Combining with DFT simulations, the detailed mechanisms of release of CO for CORM-2 dissolved in DMSO are schematically proposed, which can significantly contribute to its drug optimization and pharmacological as well as physiological applications.

Metal-CO Bonding in Mononuclear Transition Metal Carbonyl Complexes.

DFT calculations have been carried out for coordinatively saturated neutral and charged carbonyl complexes [M(CO)n]q where M is a metal atom of groups 2–10. The model compounds M(CO)2 (M = Ca, Sr, Ba) and the experimentally observed [Ba(CO)]+ were also studied. The bonding situation has been analyzed with a variety of charge and energy partitioning approaches. It is shown that the Dewar–Chatt–Duncanson model in terms of M ← CO σ-donation and M → CO π-backdonation is a valid approach to explain the M–CO bonds and the trend of the CO stretching frequencies. The carbonyl ligands of the neutral complexes carry a negative charge, and the polarity of the M–CO bonds increases for the less electronegative metals, which is particularly strong for the group 4 and group 2 atoms. The NBO method delivers an unrealistic charge distribution in the carbonyl complexes, while the AIM approach gives physically reasonable partial charges that are consistent with the EDA-NOCV calculations and with the trend of the C–O stretching frequencies. The AdNDP method provides delocalized MOs which are very useful models for the carbonyl complexes. Deep insight into the nature of the metal–CO bonds and quantitative information about the strength of the [M] ← (CO)8 σ-donation and [M(d)] → (CO)8 π-backdonation visualized by the deformation densities are provided by the EDA-NOCV method. The large polarity of the M–CO π orbitals toward the CO end in the alkaline earth octacarbonyls M(CO)8 (M = Ca, Sr, Ba) leads to small values for the delocalization indices δ(M–C) and δ(M···O) and significant overlap between adjacent CO groups, but the origin of the charge migration and the associated red-shift of the C–O stretching frequencies is the [M(d)] → (CO)8 π-backdonation. The heavier alkaline earth metals calcium, strontium and barium use their s/d valence orbitals for covalent bonding. They are therefore to be assigned to the transition metals.

Gas phase synthesis of 4d transition metal carbonyl complexes with thermalized fission fragments in single-atom reactions

Abstract The formation of carbonyl complexes using atom-at-a-time quantities of short-lived transition metals from fusion and fission reactions was reported in 2012. Numerous studies focussing on this chemical system, which is also applicable for the superheavy elements followed. We report on a novel two-chamber approach for the synthesis of such complexes that allows spatial decoupling of thermalization and gas-phase carbonyl complex synthesis. Neutron induced fission on 235U and spontaneous fission of 248Cm were employed for the production of the fission products. These were stopped inside a gas volume behind the target and flushed with an inert-gas flow into a second chamber. This was flushed with carbon monoxide to allow the gas-phase synthesis of carbonyl complexes. Parameter studies of the transfer from the first into the second chamber as well as on the carbonyl complex formation and transport processes have been performed. High overall efficiencies of more than 50% were reached rendering this approach interesting for studies of superheavy elements. Our results show that carbonyl complex formation of thermalized fission products is a single-atom reaction, and not a hot-atom reaction.

Synthesis and characterization of crystalline niobium and tantalum carbonyl complexes at room temperature.

A variety of homoleptic transition metal carbonyl complexes are known as bulk compounds for group 7-12 metals. These metals typically feature a maximum of 6 CO ligands to form complexes with 18 valence electrons. In contrast, group 3-5 metals, with fewer valence electrons, have been shown to form highly coordinated heptacarbonyl and octacarbonyl complexes-although they were only identified by gas-phase mass spectrometry and/or matrix isolation spectroscopy work. Now we have prepared heptacarbonyl cations of niobium and tantalum as crystalline salts that are stable at room temperature. The [M(CO)7]+ (M = Nb or Ta) complexes were formed by the oxidation of [M(CO)6]- with 2Ag+[Al(ORF)4]- (RF, C(CF3)3) under a CO atmosphere; their experimental characterization was supported by density functional theory calculations. Other unusual carbonyl compounds were also synthesized: two isostructural salts that contained the 84-valence-electron cluster cation [Ag6{Nb(CO)6}4]2+, the piano-stool complexes [(1,2-F2C6H4)M(CO)4]+ and two polymorphs of neutral Ta2(CO)12 with a long, unsupported Ta-Ta bond.

Diminished viability of human ovarian cancer cells by antigen-specific delivery of carbon monoxide with a family of photoactivatable antibody-photoCORM conjugates.

Carbon monoxide (CO)-releasing antibody conjugates were synthesized utilizing a photoactivatable CO-releasing molecule (photoCORM) and mouse monoclonal antibodies linked by a biotin-streptavidin system. Different monoclonal antibodies raised against different surface-expressed antigens that are implicated in ovarian cancer afforded a family of antibody-photoCORM conjugates (Ab-photoCORMs). In an immunosorbent/cell viability assay, Ab-photoCORMs accumulated onto ovarian cancer cells expressing the target antigens, delivering cytotoxic doses of CO in vitro. The results described here provide the first example of an "immunoCORM", a proof-of-the-concept antibody-drug conjugate that delivers a gaseous molecule as a warhead to ovarian cancer.

Transition Metal Carbonyl Complexes of an N-Heterocyclic Carbene Stabilized Silyliumylidene Ion.

Silyliumylidene ions-Si(II) cations with a stereochemically active lone pair of electrons-can act as ligands in transition metal complexes comparable to silylenes. However, no investigations concerning their donor abilities have been carried out. Carbonyl complexes lend themselves exceptionally well to determine the donor/acceptor strength of various ligand systems. We now report the synthesis of novel group 6 and group 8 transition metal carbonyl complexes 2-5 of N-heterocyclic carbene (NHC) stabilized silyliumylidene ion 1b, including the first Cr, Mo, and Fe complexes of a Si(II) cation. The complexes were fully characterized by multinuclear NMR and IR spectroscopy and SC-XRD studies. A combination of experimentally determined IR bands together with theoretical calculations revealed weak σ-donor properties and a negligible π-acceptor ability of NHC-stabilized Si(II) cation 1b.

Pnictogen‐containing iron and chromium carbonyl complexes: From complexes to semiconducting frameworks

AbstractRecently, main group elements containing transition metal carbonyl complexes have received much attention due to their novel bonding modes and versatile reactivities. In this article, we will focus on the development of pnictogen (Bi, Sb, and As)‐containing Fe or Cr carbonyl complexes reported in our previous study, in which their rational synthetic methodologies, intriguing reactivities, as well as their special properties will be described and systematically compared. Importantly, a unique zig‐zag Bi‐Fe polymer was synthesized, and several Bi‐Cr complexes were found to exhibit surprising semiconducting behaviors with varied ultra‐low energy gaps via the through‐bond or through‐space electron communication.

Highly Photoactive Polythiophenes Obtained by Electrochemical Synthesis from Bipyridine-Containing Terthiophenes

According to numerous previous reports, a Z-scheme with two photon absorbers is the most promising strategy to achieve artificial photosynthesis, but in addition to two efficient catalysts — one for oxygen evolution, the other for CO2 reduction — two different and complementary semiconducting sensitizers are required. Here we present the synthesis of two bipyridine-functionalized terthiophenes, which can be electropolymerized to give photoactive p-type semiconductors the capability to perform as photocathode in photoelectrochemical cells for water photosplitting or artificial photosynthesis. Indeed the bipyridine moiety in their structure allows the binding of transition metal carbonyl complexes employed in CO2 reduction, and their band-gap is suitable for the coupling with wide band-gap semiconductors, which have already found application as photoanodes. Finally, they are characterized by photogenerated charge carrier density between 1.1 and 1.4 × 1019 cm−3, with first-order recombination constant of 0.7–1.8 × 10−2 s−1. These figures are of the same order of magnitude of their inorganic counterparts and would therefore guarantee photoconductivity of the device and the activation of the organometallic catalysts with which they should be coupled to function as photocathodes for CO2 reduction.

Computational Characterization of Bidentate P-Donor Ligands: Direct Comparison to Tolman's Electronic Parameters.

The applicability of two types of transition-metal carbonyl complexes as appropriate candidates for computationally derived Tolman’s ligand electronic parameters were examined with density functional theory (DFT) calculations employing the B97D3 functional. Both Pd(0)L2(CO) and HRh(I)L2(CO) complexes correlated well with the experimental Tolman Electronic Parameter scale. For direct comparison of the electronic effects of diphosphines with those of monophosphines, the palladium-containing system is recommended. The trans influence of various phosphines did not show a major difference, but the decrease of the H-Rh-P angle from linear can cause a significant change.

Aryl Oligogermanes as Ligands for Transition Metal Complexes

The ligand properties of a series of aryl oligogermanes R3Ge‐GeAr3, 3–7 [Me3Ge‐GePh3 (3), Me3Ge‐Ge(pTol)3 (4), Ph3Ge‐GePh3 (5), (C6F5)3Ge‐GePh3 (6), Ph3Ge‐GeMe2GePh3 (7)] for the synthesis of transition metal carbonyl complexes such as R3Ge‐GeAr2(R′C6H4‐η6)M(CO)3 (M = Cr, 3a–7a; M = Mo, 3b; M = W, 3c) were investigated. The target complexes were obtained in moderate yields using several different synthetic approaches. The physicochemical properties of these new derivatives were investigated by IR, UV/Vis, NMR spectroscopy, electrochemistry, and DFT calculations. The molecular structures of 3c, 4a, and 5a were studied by single‐crystal X‐ray diffraction analysis. A comparative analysis of donor and acceptor properties of aryl oligogermanes as ligands for transition metal carbonyl complexes is reported.

Carbon Chain Growth by Sequential Reactions of CO and CO2 with [W(CO)6] and an Aluminum(I) Reductant.

The formation of carbon chains by the coupling of CO x ( x = 1 or 2) units on transition metals is a fundamental step relevant to Fischer-Tropsch catalysis. Fischer-Tropsch catalysis produces energy dense liquid hydrocarbons from synthesis gas (CO and H2) and has been a mainstay of the energy economy since its discovery nearly a century ago. Despite detailed studies aimed at elucidating the steps of catalysis, experimental evidence for chain growth (C n → C n+1; n ≥ 2) from the coupling of CO units on metal complexes is, to the best of our knowledge, unprecedented. In this paper, we show that carbon chains can be grown from sequential reactions of CO or CO2 with a transition metal carbonyl complex. By exploiting the cooperative effect of transition and main group metals, we document the first example of chain propagation from sequential coupling of CO units (C1 → C3 → C4), along with the first example of incorporation of CO2 into the growing carbon chain.

Efficient Intramolecular Vibrational Excitonic Energy Transfer in Ru3(CO)12 Cluster Revealed by Two-Dimensional Infrared Spectroscopy.

Trinuclear transition-metal carbonyl complex dodecacarbonyl triruthenium (Ru3(CO)12) is considered as one of the paradigms in cluster chemistry, which plays an important role in photocatalysis, photoenergy conversion, and synthetic chemistry. Due to structural symmetry (D3h point group), 12 carbonyl (C≡O) groups in the Ru3(CO)12 complex contribute to mainly three excitonic carbonyl stretching modes: E' (radial), A2″ (axial), and E' (axial). In this work, efficient intramolecular vibrational energy redistribution (IVR) processes among the three modes in this Ru-CO complex were observed to occur on the time scale of tens of picoseconds. The IVR processes were characterized in detail using a kinetic model and fitting to the waiting-time-dependent diagonal and off-diagonal signals of ultrafast two-dimensional infrared spectroscopy. In addition, the diagonal anharmonicities of the three C≡O stretching modes were determined to be quite close to one another, and the coupling-induced cross peaks were invariant because this Ru3(CO)12 cluster does not show picosecond fluxionality and hence their contributions were neglected in modeling the IVR processes. Our results provide a benchmark for understanding the excitonic nature of the vibrational excited states of the carbonyl vibrators and the associated efficient vibrational energy-flow pathways, in such multicentered transition-metal complexes, which are of key importance to their functions.