Carbon Black Research Articles

A facile in‐situ fabrication of black polyimide films with ultrahigh electrical properties

AbstractConsidering the ongoing evolution of flexible printed circuit boards and the importance of safeguarding the intellectual property of circuit designs, there exists an imperative demand for the development of a black film exhibiting exceptional electrical properties and remarkable light‐shielding capabilities. Consequently, this work employs a straightforward strategy to enhance the opacity of polyimide films by incorporating carbon black (CB) and manganese dioxide (MnO2) as black fillers using an in situ doping method. Rigorous tests are conducted, analyzing properties such as dielectric constant, dielectric loss, breakdown field strength, current density, and ferroelectric energy storage. The optimal ratio of CB to MnO2 (mass fraction) is determined as 1:5, with a total powder doping amount of 6 wt%, providing the best ratio relative to the matrix resin. This ratio ensures an optimal powder dispersion state, resulting in an outstanding breakdown field of 147.4 kV/mm and ultralow dielectric constants, measuring less than 3.78 at 103 Hz. This composite film is anticipated to find applications as a cutting‐edge material for electronic devices and the semiconductor industry.

Mesoporous carbon nanoparticles embedded with iron in hydrogen-photothermal synergistic therapy

We developed a new method to synthesize polyethylene glycol modified ultra small iron embedded in mesoporous carbon nanoparticle (C/Fe-PEG NP) for hydrogen (H2) assisted photothermal synergistic therapy. Herein, we use a simple in-situ reduction method to obtain the C/Fe NP in one-step carbonizing process, which is further modified by the biocompatible polyethylene glycol (PEG) on the surface of C/Fe NP to acquire high stability in physiological solutions. Utilizing the excellent photothermal property from the mesoporous carbon and the controllable H2 release property in the weakly acidic tumor microenvironment by the ultra-small Fe, the obtained C/Fe-PEG NPs can effective kill the cancer cells, meanwhile, protect normal cells without drugs. This selective anti-cancer mechanism of C/Fe-PEG NPs may because the produced H2 selective change the mitochondrial energy metabolism. In vivo results prove that the C/Fe-PEG NPs achieve excellent tumor ablation therapeutic effect and normal tissue protecting ability benefit from the H2-assisted photothermal therapy, promising the use of novel nanomaterials with more safety method for future cancer therapy.

Carbon-TiO2 Hybrid Quantum Dots for Photocatalytic Inactivation of Gram-Positive and Gram-Negative Bacteria.

Carbon-semiconductor hybrid quantum dots are classical carbon dots with core carbon nanoparticles doped with a selected nanoscale semiconductor. Specifically, on those with the nanoscale TiO2 doping, denoted as CTiO2-Dots, their synthesis and thorough characterization were reported previously. In this work, the CTiO2-Dots were evaluated for their visible light-activated antibacterial function, with the results showing the effective killing of not only Gram-positive but also the generally more resistant Gram-negative bacteria. The hybrid dots are clearly more potent antibacterial agents than their neat carbon dot counterparts. Mechanistically, the higher antibacterial performance of the CTiO2-Dots is attributed to their superior photoexcited state properties, which are reflected by the observed much brighter fluorescence emissions. Also considered and discussed is the possibility of additional contributions to the antibacterial activities due to the photosensitization of the nanoscale TiO2 by its doped core carbon nanoparticles.

A review of ternary polymer nanocomposites containing clay and calcium carbonate and their biomedical applications

Abstract Patchy interactions and heterogeneous charge distribution make nanoclay (NC) a promising biomaterial to interact with different biomolecules, polymers, and biological components. Many researchers have studied the polymer/clay nanocomposites in recent years. However, some deficiencies, such as poor impact strength, limit the application of polymer/clay nanocomposites in different fields. As a result, many attempts have been made to resolve this problem. Also, researchers have developed calcium carbonate (CaCO3) nanoparticles as biomedical materials. The nontoxic properties and biocompatibility of both CaCO3 and NC make their nanocomposites ideal for biomedical applications. In this article, a detailed review of the ternary polymer nanocomposites containing NC and CaCO3 is presented. The morphological, thermal, mechanical, and rheological characteristics, in addition to the modeling of behavior and foam properties, are studied in this article. In addition, the potential challenges for ternary nanocomposites and their biomedical applications are discussed.

A Novel Multiple Plasma Jet Tangentially Mixed Reactor: Design and Carbon Black Production

A Novel Multiple Plasma Jet Tangentially Mixed Reactor: Design and Carbon Black Production

Interfacial Electronic Interactions within the Pd-CeO2/Carbon Onions Define the Efficient Electrocatalytic Ethanol Oxidation Reaction in Alkaline Electrolytes.

Porous Pd-based electrocatalysts are promising materials for alkaline direct ethanol fuel cells (ADEFCs) and ethanol sensors in the development of renewable energy and point-of-contact ethanol sensor test kits for drunk drivers. However, experimental and theoretical investigations of the interfacial interaction among Pd nanocrystals on supports (i.e., carbon black (CB), onion-like carbon (OLC), and CeO2/OLC) toward ADEFC and ethanol sensors are not yet reported. This is based on the preparation of Pd-CeO2/OLC nanocrystals by the sol-gel and impregnation methods. Evidently, the porous Pd-CeO2/OLC significantly increased membrane-free micro-3D-printed ADEFC performance with a high peak power density (Pmax = 27.15 mW cm-2) that is 1.38- and 7.58-times those of Pd/OLC (19.72 mW cm-2) and Pd/CB (3.59 mW cm-2), besides its excellent stability for 48 h. This is due to the excellent interfacial interaction among Pd, CeO2, and OLC, evidenced by density functional theory (DFT) simulations that showed a modulated Pd d-band center and facile active oxygenated species formation by the CeO2 needed for ethanol fuel cells. Similarly, Pd-CeO2/OLC gives excellent sensitivity (0.00024 mA mM-1) and limit of detection (LoD = 8.7 mM) for ethanol sensing and satisfactory recoveries (89-108%) in commercial alcoholic beverages (i.e., human serum, Amstel beer, and Nederberg Wine). This study shows the excellent possibility of utilizing Pd-CeO2/OLC for future applications in fuel cells and alcohol sensors.

Non-Enzymatic Electrochemical Sensing of Glucose with a Carbon Black/Polyaniline/Silver Nanoparticle Composite

The present work describes the synthesis of an electroactive nanocomposite consisting of carbon black (CB) and polyaniline (PANI) obtained by in situ oxidative polymerization. Monomer P1 was used as a polyaniline precursor. P1 has surfactant properties that allow obtaining core–shell structures dispersed in an aqueous medium. The nanocomposite, together with silver nanoparticles (AgNPs) as an electrocatalytic element, was used to modify the surface of a glassy carbon electrode (GCE) for glucose detection. Electroactive areas were calculated using the Randles–Sevick equation. The results showed that the CB-PANI.1-1/AgNP nanocomposite exhibited a larger electroactive surface area (0.3451 cm2) compared to AgNP alone (0.0973 cm2) or the CB-PANI.1-1 composite (0.2989 cm2). Characterization of CB-PANI.1-1/AgNP, by cyclic voltammetry in the presence of glucose, showed a new oxidation peak with a maximum current close to 0.7 V due to the oxidation of glucose to gluconolactone. The amperometry test at 0.7 V showed a linear response with R2 of 0.999 as a function of the analyte concentration. The glucose sensor presented a linear detection range of 1 to 10 mM, a sensitivity of 41 µA mM−1 cm−2, and a limit of detection (LOD) of 520 µM.

Novel olive stone biochar particle network for piezoresistive strain sensing in natural fiber‐reinforced composites

AbstractNatural fiber‐reinforced composites (NFRCs) suffer from water absorption and low temperature stability, resulting in fiber degradation and subsequent material failure. Built‐in piezoresistive sensors are investigated to monitor the deformation/strain of the component. As a low‐cost material from renewable resources biochar particles derived from olive stones were applied on flax plies and yarn bundles that served as model systems. Carbon black samples as petrochemical variants were used as a reference material. Biochar and carbon black‐covered fiber systems were laminated in epoxy resin followed by tensile tests. The electrical resistance was recorded simultaneously during testing. Biochar with a broad size distribution from nano to high micrometer range (D < 200 μm) was superior in sensor performance compared to carbon black and biochar with a smaller particle size range D < 20 μm. Gauge factors (GF) of NFRC samples with integrated biochar particles reached 30–80 while carbon black could not exceed a GF of 8. To obtain maximum GFs, yarn count of flax yarn/ply substrate should be as thin as possible, but still enable percolation of the adhering particle network. Comparatively large particle size was identified as a contributing factor enabling the high GF for coarse biochar compared to carbon black.Highlights A nonfossil biochar built‐in piezoresistive sensor in natural fiber‐reinforced composites was fabricated Deposing biochar directly on flax fibers facilitates processing The biochar piezoresistive sensor exhibits superior sensitivity compared to carbon black

Castor seed-derived luminescent carbon nanoparticles for metal ion detection and temperature sensing applications

In the current study, castor seeds are used as a first-time natural precursor in the hydrothermal process of making carbon nanoparticles. The produced nanoparticles have a non-uniform size distribution with an average diameter of 13 nm and a roughly spherical shape. They comprise a variety of functional groups containing carbon, nitrogen, and oxygen. Their spectra have peaks at 524 nm and 441 nm for their emission and excitation, respectively. They exhibit temperature-sensitive Photoluminescence (PL) behaviour, high quantum yield value (24%), and excitation-dependent emission. In high salt environments, UV radiation, storage time, and fluorescent light they provide exceptional photostability. They have been used in applications for metal ion and thermal sensing. With a limit of detection (LOD) value of 18 μM, they are found to be both sensitive and selective to Fe3+ ions. Additionally, a nanothermosensor with good recovery and a broad temperature range (5 °C–85 °C) has also been demonstrated with a thermal sensitivity of 0.54% °C−1 based on their temperature-sensitive behaviour.

Targeting the Antifungal Activity of Carbon Dots against Candida albicans Biofilm Formation by Tailoring Their Surface Functional Groups.

Carbon dots (CDs) are an emerging class of carbon nanoparticles, which for their characteristics have found applications in many fields such as catalysis, materials and biomedicine. Within this context, the application of CDs as antibacterial agents has received much attention in very recent years, while their use as antifungal nanoparticles has been scarcely investigated. Here we report a systematic investigation of the surface functional groups of CDs to study their influence on these nanoparticles' against Candida albicans. Three classes of CDs have been synthesised and fully characterized. A thorough in vitro and in vivo biological screening against C. albicans was performed to test their antifungal, antiadhesion and antibiofilm formation activities. Moreover, the interaction with C. albicans cells was investigated by microscopic analysis. Our results evidence how the presence of a positively polarised surface results crucial for the internalization into COS-7 cells. Positively charged nanoparticles were also able to inhibit adhesion and biofilm formation, to interact with the cellular membrane of C. albicans, and to increase the survival of G. mellonella infected larvae after the injection with positive nanoparticles. The antifungal activity of CDs and their extremely low toxicity may represent a new strategy to combat infections sustained by C.albicans.

Colourants on the Persian architectural decorations from the 11th to the 15th century

AbstractOver 200 samples from colourants appeared in 50 monuments in Iran dated back to the 11th century up to the 15th century were identified using micro‐X‐ray fluorescence (μ‐XRF), micro‐Raman spectroscopy (μ‐Raman), polarized light microscopy (PLM), and scanning electron microscopy–energy dispersive X‐ray spectrometry (SEM‐EDS). Whereas red ochre, red lead, vermilion, and an organic red dye were identified as red colourants, ultramarine blue, azurite, and indigo were the blue colourants occurred in the wall decorations. In addition, atacamite was the only green pigment identified on the wall paintings and stucco decorations, and carbon black was identified as black pigment. We also show that gold leaf and tin foil have been used in gilding decorations. Furthermore, we were able to discern yellow ochre together with orpiment, natrojarosite, and crocoite in a number of architectural decorations. Moreover, we show that huntite and gypsum are used as white preparation layer of the wall decorations in Iran. Periods of emergence of particular pigments have been discussed and regional preferences in the use of certain pigments are argued. An extensive discussion is provided to compare the colourant appeared on wall decoration with those appeared on illuminated manuscripts in the Persianate world.

Infiltration of nanocarbon into the trachea during thyroidectomy surgery: case series and literature review

Introduction: The presence of metastatic disease in the cervical lymph nodes can affect the recurrence and survival of patients with thyroid cancer. Parathyroid gland injury during surgery can result in hypoparathyroidism, particularly with total thyroidectomy. Injection of carbon nanoparticles into the thyroid will label draining lymph nodes and aid in the visualization of metastatic cervical lymph nodes during a radical operation, sparing accidental damage to the parathyroid glands. Although reported to be useful during surgery, the safety of nano-carbon particles has rarely been investigated, and adverse side effects need to be studied. Case presentation: We describe five patients with thyroid cancer who had carbon secretions in the trachea or mucosa after carbon nanoparticles were injected into the thyroid. A patient with carbon secretions in the trachea mucosa recovered but had progressive dyspnea. Surgical treatment was performed, and a mass was found in the trachea mucosa. After excluding all other possibilities, we concluded that the mass was caused by nano-carbon suspension. Discussion: To our knowledge, there are no reports on nano-carbon suspension into the mucosa and no consensus has yet been reached on the precise injection site, depth, or dose for injecting carbon nanoparticles before thyroidectomy. Conclusion: We suggest that the most appropriate injection depth of nano-carbon suspensions should be no more than 3 mm of the thyroid gland thickness to avoid deep injection into the trachea.

Reprocessable and Recyclable Self-Healing Natural Rubber/Carbon Black Composite Based on Metal Thiolate Ionic Network

Reprocessable and recyclable self-healing rubber composites were fabricated by mixing natural rubber (NR) with carbon black (CB) filler in the presence of zinc thiolate (ZT) to form the ionic association in the rubber system. This work investigated and compared the unfilled and natural rubber filled with 5phr of carbon black. The recycling process was repeated three times, and the mechanical performance was measured each time. Tensile strength was increased by more than 430% for unfilled rubber and 520% for NR/5CB composites after the third recycling process. Tear strength was also increased with the number of the recycling process. According to a welding test ability, the developed materials showed potential for repair. Scanning electron micrographs revealed that as the recycling number increased, the white spot of ZT responsible for generating the ionic network reduced as more ZT was converted into Zn2+ salt bonding.

Kinetics of Formation and Degradation of Elastomer Matrix with New Generation Non ASTM Carbon Black

Kinetics of Formation and Degradation of Elastomer Matrix with New Generation Non ASTM Carbon Black

Comprehensive Study on Carbon-Coated Silver for Improved Tribo-Electrical and Wetting Performance

The rise in electrification has considerably increased the demand for high-efficiency and durable electrical contact materials. Carbon nanoparticles (CNP) are a promising coating material due to their intrinsic transport properties (thus minimizing the impact on conductivity), their proven solid lubricity (potentially improving tribological performance), and their hydrophobic wetting behavior (potentially providing atmospheric protection). In this study, carbon nanotube and nanohorn coatings are produced via electrophoretic deposition on silver-plated surfaces, followed by tribo-electrical and wetting characterization. The proposed coatings do not negatively affect the conductivity of the substrate, showing resistance values on par with the uncoated reference. Tribo-electrical characterization revealed that the coatings reduce adhesive wear during fretting tests while maintaining stable and constant electrical contact resistance. Furthermore, CNP-coated surfaces show a hydrophobic wetting behavior toward water, with graphite and carbon nanotube (CNT) coatings approaching super-hydrophobicity. Prolonged exposure to water droplets during sessile drop tests caused a reduction in contact angle (CA) measurement; however, CNT coatings’ CA reduction after five minutes was only approximately 5°. Accordingly, CNP (specifically CNT) coatings show auspicious results for their application as wear and atmospheric protective barriers in electrical contacts.

Effect of Prestrain on Payne Effect and Hysteresis Loss of Carbon-Black-Filled Rubber Vulcanizates: Measurements and Modeling.

The performance of a viscoelastic damper is governed by the mechanical properties of the viscoelastic material, which are sensitive to prestrain. Among viscoelastic materials, carbon black (CB)-filled rubber vulcanizate is commonly used in structural applications. In this paper, the prestrain-dependent Payne effect and hysteresis loss of CB-filled rubber vulcanizates are investigated through experimental and theoretical analysis. Based on the experimental results, the classic quantitative models proposed by Kraus, Huber-Vilgis, and Maier-Göritz are used to describe the Payne effect. The results show that the Maier-Göritz model is most suitable to describe the Payne effect, especially for the loss modulus. After calculating the area of the hysteresis loops, hysteresis loss curves at various dynamic strain amplitudes are parallel to each other. Through application of the time-strain superposition principle, the hysteresis loss at any arbitrary prestrain can be predicted. Thus, the aim of this paper is to provide guidance for researchers in choosing an accurate model for future investigations of the prestrain-dependent Payne effect. An accelerated characterization method is useful for the prediction of the hysteresis loss of rubber products using small amounts of experimental data, which can provide manufacturers with more attractive and lower cost opportunities for testing the mechanical properties of rubber products.

A Review of Development of Chemical Sensors

A comprehensive summary of the most recentre search concentrating on chemical sensors utilizing nano tubes,Nano rods,Nano belts, and nano wiresis given in this article. The experimental principle, sensor device design,sensor mechanism, and multiple significant conclusionsreceivethevastmajorityofourattention.Thefollowingfoursectionsprovide additional information on the creation of chemical sensors based on nanostructured materials: nanotube sensors, Nano rod sensors, Nano belt sensors and Nano wire sensors. Weconcludethisreviewwithpersonalperspectivesonthedirectionstowardswhichfuture research on nanostructured sensors might be directed. At ambient temperature, the nanotube sensors show a far faster response time and a significantly higher sensitivity than the current solid-state sensors. Reversibility of the sensor can be obtained by heating it to a high temperature or by slowly recovering under ambient conditions. Over the past decade, synthesized nanomaterial’s, such as carbon nanotube, nanoparticle, quantum dot, and nanowire, have already made breakthroughs in various fields, including biomedical sensors. Enormous surface area-to-volume ratio of the Nano materials increases sensitivity dramatically compared with macro-sized material. Herein we present a comprehensive review about the working principle and fabrication process of nanowire sensors. Then anotube sensor sex hibit a fast response and asubstantially higher sensitivity than thatofexistingsolid-statesensorsatroomtemperature.Sensorreversibilityisachievedbyslow recovery under ambient conditions or by heating to high temperatures.Synthesized Nano materials, including carbon nanotubes, nanoparticles, quantum dots, and nanowires, have already achieved significant advances in a number of sectors, including biological sensors, during the last ten years. When compared to macro-sized material, the nanoparticles' enormous surface area-to-volume ratio significantly boosts sensitivity. We provide a thorough overview of the fabrication process and operating principle of the nanowire sensor here. Recent advances including self-powering, reusability, sensitivity in high ionic strength solvent,andlong-term stabilityaresurveyedandhighlightedas well.Nanowire isexpectedtolead significant improvement of biomedical sensor in the near future.Advantages and disadvantages of the sensors are provided along with brief descriptions. An electrical device that monitors changes in a quantity, such as voltage, temperature, pressure, or humidity, is called a sensor. As a result, classification is done according to the attribute that a sensor measures. A temperature sensor detects even the smallest variations in its environment or shifts in temperature, such as hot or cold weather. Microelectronic manufacturing techniques have been used to manufacture chemical and electrochemical sensors.Thedevelopment ofchemical sensors has been spurred forward by the recentadvancesinmicromachingtechnology.Chemicalsensorresearchhasadvancedthanksto micro machining methods like sacrificiallayers, plasmaetching, andchemicalanisotropicetching. These methods enable the creation of low mass, low power driven devices as well as controlled working conditions and temperature. Researchersbecameinterestedinthesecarefullychoseninvitronanostructureswhentheywere combined with nanomaterials because the improved properties of these nanostructures led to advances inthe analytical performance of chemical and biosensors. Thisstudycoversthe latest advancements in recognition elements that are integrated in to chemical sensors and bio sensors used in the food, medical, and environmental domains. These elements include both traditional ones like enzymes and antibodies as well as more modern ones like aptomers and phages.Cyclic voltammetry and electron microscopy are frequently used in the characterization of chemically modified sensors and biosensors because they enable the confirmation of electrode mechanisms and surface morphologies. X-ray photoelectron spectroscopy (XPS), among other methods, is a special tool for obtaining information on the sensor surface that is qualitative, quantitative/semi-quantitative, and speciation-related. However, XPS is still not widely applied in this industry. The purpose of this work is to review a few selected studies that demonstrate how wellXPSperformswhencharacterizingthetopsurfacelayersofbiosensorsandchemically Modified sensors. The reader is provided with the necessary background information in a brief introduction to X-ray photoelectron spectroscopy. The use of XPS to characterize sensors appropriate for environmental and food analysis is highlighted.

Open-source electrochemical cell for in situ X-ray absorption spectroscopy in transmission and fluorescence modes.

X-ray spectroscopy is a valuable technique for the study of many materials systems. Characterizing reactions in situ and operando can reveal complex reaction kinetics, which is crucial to understanding active site composition and reaction mechanisms. In this project, the design, fabrication and testing of an open-source and easy-to-fabricate electrochemical cell for in situ electrochemistry compatible with X-ray absorption spectroscopy in both transmission and fluorescence modes are accomplished via windows with large opening angles on both the upstream and downstream sides of the cell. Using a hobbyist computer numerical control machine and free 3D CAD software, anyone can make a reliable electrochemical cell using this design. Onion-like carbon nanoparticles, with a 1:3 iron-to-cobalt ratio, were drop-coated onto carbon paper for testing in situ X-ray absorption spectroscopy. Cyclic voltammetry of the carbon paper showed the expected behavior, with no increased ohmic drop, even in sandwiched cells. Chronoamperometry was used to apply 0.4 V versus reversible hydrogen electrode, with and without 15 min of oxygen purging to ensure that the electrochemical cell does not provide any artefacts due to gas purging. The XANES and EXAFS spectra showed no differences with and without oxygen, as expected at 0.4 V, without any artefacts due to gas purging. The development of this open-source electrochemical cell design allows for improved collection of in situ X-ray absorption spectroscopy data and enables researchers to perform both transmission and fluorescence simultaneously. It additionally addresses key practical considerations including gas purging, reduced ionic resistance and leak prevention.

Vulcanization kinetics and reinforcement behaviour of natural rubber-carbon black composites: Addition of Shea-butter versus aromatic oil as plasticizers

This work is a comparative study between Shea butter (SB) and treated distillate aromatic extract oil (TDAE) as plasticizers in the vulcanization of natural rubber (NR)- carbon black (CB) vulcanizates (—CB—S—NR—). The plasticized —CB—S—NR— composites extended scorch (Ts2) and optimum (T90) curing times. The delays in crosslinking reaction were suspected to be due to the increased viscosity (ML) and insulation of the reacting species (NR, CB, Sulfur and other curing aids) by the films of plasticizers. This effect increased the activation energy (Ea (KJ/mol)) for vulcanization. The —CB—S—NR— without plasticizer SB (SBO), showed higher ML, crosslinking density index (ΔM), rheological strength (MH) and low cure reversion properties than others. In comparison, the SB loaded —CB—S—NR— composites showed improvement in ML, ΔM, T90, with lowers Ea (KJ/mol) than TDAE samples. Also, the SB compounds exhibited higher Young's modulus Eo(MPa) than SBO and TDAE compounds. For instance, the Eo(MPa) of SB5 was over 7 and 1200 % higher than SBO and STD5 respectively. However, —CB—S—NR— filled with TDAE generally showed higher strength(MPa), attributed to stronger CB—NR interactions. Therefore, environmentally friendly SB could replace petroleum based oils for compounding rubbers.

Influence of Carbon Black on Conductivity and Structure of Polyethylene Oxide Based Polymer Electrolyte Film

AbstractThe potential applications of carbon black are expected to grow as science and technology improve offering up new possibilities for innovation throughout disciplines included in the field of energy storage. The present work shows the influence of carbon black to improve the ionic conductivity of the polymer electrolyte. The synthesis of polyethylene oxide: ammonium iodide based polymer electrolyte incorporated with carbon black varying from 0.01 to 0.06 wt% with respect to PEO: NH4I system by solution casting method. Different characterizations like polarized optical microscopy (POM), impedance spectroscopy, and ionic transference number (tion) are studied in detail. The maximum ionic conductivity is achieved at 0.05 wt% carbon black shows 1.20 × 10−5 S cm−1 at ambient temperature. In accordance with POM data, the amorphous region has increased whereas the crystalline region has shrunk which further indicated the increase in ionic conductivity. The value of (tion) is calculated to be 0.97 which shows the system is ionic in nature. PEO based polymer electrolyte doped carbon black can be used for the fabrication of energy storage devices.