Carbonate Research Articles

Radical radiotherapy without surgical tumor resection for rectal cancer

In this editorial, I would like to comment on the article, recently published in the World Journal of Clinical Oncology . The article focuses on non-surgical treatments for locally recurrent rectal cancer, including the watch-and-wait (WW) strategy after total neoadjuvant therapy (TNT) and particle beam therapy. As treatment options for rectal cancer continue to evolve, the high complete response rate achieved with TNT has led to the development of a new non-surgical approach: WW. Chemoradiotherapy followed by consolidation chemotherapy, in particular, has a low rate of tumor growth and is a treatment aimed at achieving a cure without surgery. However, the risk of recurrence within two years is significant, necessitating careful follow-up. Establishing standardized follow-up methods that can be implemented by many physicians is essential. Carbon ion radiotherapy has demonstrated high local control with a low incidence of severe late toxicities, even after previous pelvic radiotherapy. While these new non-surgical curative treatments for rectal cancer require further investigation, future advancements in this field are anticipated.

The Spatial Dynamics of Diazotrophs in the Forefield of Three Tibetan Glaciers.

Nitrogen is often a limiting nutrient for microbial communities and plants in glacier forefields. Nitrogen-fixing microorganisms (diazotrophs) play an important role in providing bioavailable nitrogen, with their composition determining the nitrogen-fixating capacities. This study investigates the spatial and temporal dynamics of diazotrophs in the forefields of three Tibetan glaciers: Qiangyong, Kuoqionggangri, and Longxiazailongba. We collected soil samples from recently deglaciated barren grounds, and also along an ecosystem succession transect at Kuoqionggangri glacier, encompassing barren ground, herb steppe, legume steppe, and alpine meadow ecosystems. Our finding revealed abundant and diverse diazotrophs in the recently deglaciated barren ground. They are taxonomically affiliated with anaerobic Bradyrhizobium, Desulfobulbus, and Pelobacter, which may be relics from subglacial sediments. The vegetated soils (herb steppe, legume steppe, and alpine meadow) were dominated by phototrophic Nostoc and Anabaena, as well as symbiotic Sinorhizobium. Soil physicochemical parameters, such as soil organic carbon, pH, and nitrate ion, significantly influenced diazotroph community structure. This study highlights the critical role of diazotrophs in mitigating nitrogen limitation during early ecosystem development in glacier forefields. Understanding the distribution and ecological drivers of diazotrophs in these rapidly changing environments provides insights into biogeochemical cycling and ecosystem resilience under climate change.

Nanodosimetric investigation of the track structure of therapeutic carbon ion radiation. Part 2: Detailed simulation.


A previous study reported nanodosimetric measurements of therapeutic-energy carbon ions penetrating simulated tissue. The results are incompatible with the predicted mean energy of the carbon ions in the nanodosimeter and previous experiments with lower energy monoenergetic beams. The purpose of this study is to explore the origin of these discrepancies.
Approach: Detailed simulations using the Geant4 toolkit were performed to investigate the radiation field in the nanodosimeter and provide input data for track structure simulations, which were performed with a developed version of the PTra code.

Main results: 
The Geant4 simulations show that with the narrow-beam geometry employed in the experiment, only a small fraction of the carbon ions traverse the nanodosimeter and their mean energy is between 12 % and 30 % lower than the values estimated using the SRIM software. Only about one-third or less of these carbon ions hit the trigger detector. The track structure simulations indicate that the observed enhanced ionization cluster sizes are mainly due to coincidences with events in which carbon ions miss the trigger detector. In addition, the discrepancies observed for high absorber thicknesses of carbon ions traversing the target volume could be explained by assuming an increase in thickness or interaction cross-sections in the order of 1 %.

Significance: 
The results show that even with strong collimation of the radiation field, future nanodosimetric measurements of clinical carbon ion beams will require large trigger detectors to register all events with carbon ions traversing the nanodosimeter. Energy loss calculations of the primary beam in the absorbers are insufficient and should be replaced by detailed simulations when planning such experiments. Uncertainties of the interaction cross-sections in simulation codes may shift the Bragg peak position.

An empirical model of carbon-ion relative biological effectiveness based on the linear correlation between radiosensitivity to photons and carbon ions.

To develop an empirical model to predict carbon ion (C-ion) relative biological effectiveness (RBE). 

Approach. We used published cell survival data comprising 360 cell line/energy combinations to characterize the linear energy transfer (LET) dependence of cell radiosensitivity parameters describing the dose required to achieve a given survival level, e.g. 5% (D5%), which are linearly correlated between photon and C-ion radiations. Based on the LET response of the metrics D5% and D37%, we constructed a model containing four free parameters that predicts cells' linear quadratic model (LQM) survival curve parameters for C-ions, αCand βC, from the reference LQM parameters for photons, αXand βX, for a given C-ion LET value. We fit our model's free parameters to the training dataset and assessed its accuracy via leave-one out cross-validation. We further compared our model to the local effect model (LEM) and the microdosimetric kinetic model (MKM) by comparing its predictions against published predictions made with those models for clinically relevant LET values in the range of 23-107 keV/μm. 

Main Results. Our model predicted C-ion RBE within ±7%-15% depending on cell line and dose which was comparable to LEM and MKM for the same conditions. 

Significance. Our model offers comparable accuracy to the LEM or MKM but requires fewer input parameters and is less computationally expensive and whose implementation is so simple we provide it coded into a spreadsheet. Thus, our model can serve as a pragmatic alternative to these mechanistic models in cases where cell-specific input parameters cannot be obtained, the models cannot be implemented, or for which their computational efficiency is paramount.

Iron Impurity Impairs the CO2 Capture Performance of MgO: Insights from Microscopy and Machine Learning Molecular Dynamics.

Magnesium oxide (MgO) is a promising sorbent for direct air capture (DAC) of carbon dioxide. Iron (Fe) is a common impurity in naturally occurring MgO and minerals used to produce MgO, yet a molecular-scale understanding of Fe-doping effects on carbonation is lacking. Here, we observed reduced carbonation performance in Fe-doped MgO experimentally. The energetics of adsorbing a (bi)carbonate ion on pristine and Fe-doped MgO(001) surfaces were further investigated using ab initio and machine learning potential molecular dynamics coupled with metadynamics simulations. Both pristine and Fe-doped surfaces exhibited a basic (OH-) hydration layer, where the (bi)carbonate ion adsorption is thermodynamically favorable. However, the dissolution of surface Fe had smaller energy barriers and was more favorable than Mg. Leached Fe likely neutralized the near-surface basicity, yielding reduced reactivity on Fe-doped MgO. Our observations offer critical insights for material selection and emphasize the importance of evaluating the geologic origin of earth materials used for DAC.

Oxygen consumption measurements at ultra-high dose rate over a wide LET range.

The role of radiolytic oxygen consumption for the in-vitro "Ultra-High Dose Rate" (UHDR) sparing and in-vivo FLASH effect is subject to active debate, but data on key dependencies such as the radiation quality are lacking. The influence of "dose-averaged Linear Energy Transfer" (LETd) and dose rate on radiolytic oxygen consumption was investigated by monitoring the oxygen concentration during irradiation with electrons, protons, helium, carbon, and oxygen ions at UHDR and "Standard Dose Rates" (SDR). Sealed "Bovine Serum Albumin" (BSA) 5% samples were exposed to 15Gy of electrons and protons, and for the first time helium, carbon, and oxygen ions with LETd values of 1, 5.4, 14.4, 65, and 100.3keV/µm, respectively, delivered at mean dose rates of either 0.3-0.4Gy/s for SDR or approximately 100Gy/s for UHDR. The Oxylite (Oxford Optronics) system allowed measurements of the oxygen concentration before and after irradiation to calculate the oxygen consumption rate. The oxygen consumption rate was found to decrease with increasing LETd from 0.351mmHg/Gy for low LET electrons to 0.1796mmHg/Gy for high LET oxygen ions at SDR and for UHDR from 0.317 to 0.1556mmHg/Gy, respectively. A higher consumption rate for SDR irradiation compared to the corresponding UHDR irradiation persisted for all particle types. The measured consumption rates demonstrate a distinct LETd dependence. The obtained dataset, encompassing a wide range of LETd values, could serve as a benchmark for Monte Carlo simulations, which may aid in enhancing our comprehension of oxygen-related mechanisms after irradiations. Ultimately, they could help assess the viability of different hypotheses regarding UHDR sparing mechanisms and the FLASH effect. The found LETd dependence underscores the potential of heavy ion therapy, wherein elevated consumption rates in adjacent normal tissue offer protective benefits, while leaving tumor regions with generally higher "Linear Energy Transfer" (LET) vulnerable.

Effect of Silver Nanoparticle Size on Antibacterial Activity

The ubiquitous use of products containing AgNPs results in the entry of nanoparticles into the environment. Both nanoparticles and Ag+ released upon their oxidative dissolution have a toxic effect on living microorganisms. The antibacterial activity of spherical silver nanoparticles of 10.8 ± 0.8 nm and 22.7 ± 2.2 nm in size stabilized by carbonate ions was studied against Escherichia coli and other bacteria. The biocidal action of silver increases as the particle size decreases. Analysis of these results and other known data made it possible to substantiate a linear proportional relationship between the minimum inhibitory concentration (MIC) or the half-maximal inhibitory concentration (IC50) and silver nanoparticle size and determine empirical parameters for this relationship. The antibacterial activity (toxicity) is directly proportional to the specific surface area of nanosized silver.

State primary standard for units of absorbed dose and absorbed dose rate of photon, electron, proton radiation and in carbon ion beams, quantity, fuence, fux density and energy of particles in proton beams and heavy charged particles GET 38-2024

The problem of ensuring the accuracy and traceability of the measurement results of the absorbed dose in carbon ion beams, as well as the measurement results of the amount, fluence, flux density and energy of particles in proton and heavy charged particles beams is considered. Until now, in practice, these values have been measured only by indirect methods. The lack of approved measuring instruments for the quantities under consideration and the metrological traceability of measurement results of these quantities to standards did not allow achieving consistency of measurement methods used in practice and confirming the reliability of the results obtained. To solve this problem, three measuring complexes have been developed and created, which are included in the State Primary Standard of units of absorbed dose and absorbed dose rate of photon, electron, proton radiation and in carbon ion beams, quantity, fluence, flux density and energy of particles in proton and heavy charged particles beams GET 38-2024. The measuring complex for reproducing the unit of absorbed dose in carbon ion beams consists of an adiabatic calorimeter, a thermostating system, a data collection and processing system and a vacuum pumping station. To reproduce the unit of energy of protons and heavy charged particles, a complex has been implemented, which includes a total absorption calorimeter, a data collection and processing system, a vacuum pumping station and a particle count determination system based on the use of a Faraday cup. To reproduce the units of fluence and particle flux density in proton and heavy charged particles beams, a measuring complex has been created containing a Faraday cup, a set of collimators and a low current meter. The schemes, the principles and the results of studies of the metrological characteristics of the developed measuring complexes are described. The results are relevant for the field of radiation therapy and radiation resistance tests of the electronic component base used in the space industry.

Direct reduction of CO2 to carbon material on liquid cathode in molten salts

This study presents a novel method for the direct reduction of CO2 to produce carbon materials on a liquid cathode in high-temperature molten salts. CO2 gases were introduced into a Sn-Li liquid alloy, and they were subsequently reduced to solid carbons by the Li in the alloy. Unreacted CO2 gases were absorbed as carbonate ions (CO32−) in molten salts containing oxide ions (O2−). Subsequently, these carbonate ions were electrochemically reduced to solid carbons on the liquid cathode surface. Consequently, the current density was five times higher than that achieved using the conventional method without bubbling CO2 into the liquid cathode. The enhanced current density can be attributed to the combined thermochemical reduction of CO2 by Li and the electrochemical reduction of CO32−. This combination was realized for the first time at a relatively positive potential range, where pure Li or Ca cannot be deposited, leading to the carbon yield of over 90 % relative to CO2 feed reached. The resulting carbons contained a trace amount of Sn, which could be removed by washing after milling. These results show the potential for efficient and sustainable carbon capture and conversion technologies using liquid cathodes in high-temperature molten salts for CO2 reduction.

A highly water-soluble phenoxazine quaternary ammonium compound catholyte for pH-neutral aqueous organic redox flow batteries

The pH-neutral aqueous redox flow battery (ARFB) is one of the most attractive flow batteries due to its non-corrosiveness, low-cost, and wider electrochemical stability window compared to those with acidic or alkaline electrolytes. However, there are few families of organic redox-active molecules available as catholyte materials for pH-neutral ARFBs. Herein, through incorporation of quaternary ammonium moiety into the redox-active phenoxazine nucleus, an organic catholyte material, N, N, N-trimethyl-2-(10H-phenoxazin-10-yl) ethan-1-aminium chloride (NEt-POZ) is achieved for pH-neutral ARFBs. The NEt-POZ has a high redox potential of 0.79 V versus SHE and rapid redox kinetics (0.23 cm s−1) as well as high water-solubility (∼2.6 M in H2O). Paired with a methyl viologen (MV) anolyte in the pH-neutral aqueous electrolyte, a viologen-phenoxazine ARFB full cell is assembled, which shows an open circuit voltage of ∼1.23 V. However, the results of long-term cycling experiments indicate low Coulomb efficiency and rapid declining capacity of the NEt-POZ catholyte. The mechanism analysis unveils that the unstable doubly oxidized tri-cations (NEt-POZ3+) formed via the disproportionation of radical di-cations (NEt-POZ2+) in solution readily react with chloride anions to form poly-chlorinated derivatives, which precipitate from the catholyte due to their poor water solubility, leading to a rapid decrease in capacity. When there is no chloride present in the electrolyte solution, highly reactive NEt-POZ3+ cations can interact with other counter-anions (such as sulfate and carbonate ions) and even water to form complex adducts.

Tourism activities significantly contributed toatmospheric pollutants in a remote town of Tianshan revealed by the continuous observation of two years

The large reduction in tourism activities in 2020 provided a unique opportunity to investigate their contribution on atmospheric pollutants in Bayanbulak, a remote town in Tianshan, China. In this scenic and sensitive region, we measured total suspended particulates (TSP) along with concentrations of polycyclic aromatic hydrocarbons (PAHs), organic carbon (OC), elemental carbon (EC) and water-soluble inorganic ions (WSIIs) during the lockdown in 2020 and compared these to levels in the pre-pandemic period of 2019. The study revealed significant reductions in PAHs, OC, EC, and some WSIIs concentrations during the tourist season (May–October) of 2020 compared with 2019, whereas variations between non-tourist seasons were less pronounced. Furthermore, by comparing pollutant characteristics in tourist seasons of these two years, we found that 5- and 6-ring groups were main PAH constituents in 2019, while 5- and 3-ring groups contributed more to total PAHs in 2020. OC/EC ratio increased from 2019 to 2020, indicating an increase of biomass burning contribution after the lockdown. Using positive matrix factorization, we determined that emissions from tourism-related transportation and combustion of natural gas and coal (mainly for cooking) contributed 21.9% and 46.6%, respectively, to certain atmospheric pollutants in 2019, whereas they decreased significantly to 3% and 19.4% in 2020 with dust and biomass contributions increased substantially. The levels of PAHs, OC, and EC from tourism-related sources were as high as 9.31 ng m−3, 1.28 μg m−3 and 0.11 μg m−3 and decreased by 54.37%, 25.16%, and 9.54%, respectively, compared to 2019. Hence, the impact of tourism must be considered during the assessment of local air pollutant emissions, particularly in remote areas.

Rapid carbonate precipitation induced by carbamate coating: A new approach to form impermeable thin barrier and its mechanism

Various coating strategies have been explored in the past to prevent the ingress of aggressive substances into concrete. However, either the durability or performance is still far from satisfaction. Here, carbamate solutions were prepared by pre-absorbing CO2 into amino acid salts (AASs) to carbonize the surface of cementitious materials. The high concentration of carbonate ions provided by the carbamate induced rapid surface carbonation, resulting in the formation of an AAS-CaCO3 composite barrier with a thickness of 2–3 μm and possessing high micromechanical properties. Additionally, it was observed that the barrier's effectiveness depends on the molecular structures of the amino acids employed. Coatings formed by arginine-based carbamates demonstrated excellent performances, likely due to the highly compacted calcite particles they produced. This easy-to-operate and effective strategy has the potential to open new avenues for the development of highly durable and impermeable coating barriers for practical applications.

In-Situ CO2 Release from Captured Solution and Subsequent Electrolysis: Advancements in Integrated CO2 Capture and Conversion Systems

The electrochemical reduction of carbon dioxide (CO2ER) offers a compelling strategy for sustainable energy and carbon management by transforming CO2 into valuable chemicals and fuels. This approach is particularly attractive when powered by surplus renewable energy, aiding in the closure of the carbon cycle. However, the significant energy requirements for CO2 isolation, pressurization, and purification from capture media pose challenges for industrial-scale implementation. To overcome these obstacles, recently innovative electrolyzers have developed that directly convert reactive carbon solutions, such as bicarbonate-rich effluents from carbon capture units, into higher-value products. This electrolyzers produces CO2 in situ by reacting (bi)carbonate with acid generated within the electrolyzer, facilitating efficient CO2ER at the cathode surface and eliminating the need for costly CO2 recovery and compression steps. This study details recent efforts in advancing this type of electrolyzer, focusing on CO2 sources for capturing step, technical aspect consideration of integrated systems, electrolyzer design consideration and membrane designs for integrated systems. Herein, we emphasize the need for a permeable cathode that allows efficient (bi)carbonate ion transport while maintaining a high catalytic surface area. Additionally, we discuss the critical role of electrolytes, including the impact of (bi)carbonate concentration, their effect on CO2 utilizations and CO2ER selectivity. We also demonstrate the state-of-the-art performance metrics for electrolyzers that utilize CO2-captured solutions, such as Faradaic efficiency, experimental validation of CO2 sources, current density, and CO2 utilization efficiency, a guideline for future studies. Collectively, we believe that this analysis will contribute to the development of industrial-scale electrochemical reactors for CO2 conversion, advancing towards a sustainable and closed-loop carbon cycle.

High-count-rate particle tracking in proton and carbon radiotherapy with Timepix2 operated in ultra-short acquisition time

This work investigates the operational acquisition time limits of Timepix3 and Timepix2 detectors operated in frame mode for high-count rate of high deposited energy transfer particles. Measurements were performed using alpha particles from a 241Am laboratory source and proton and carbon ion beams from a synchrotron accelerator. The particle count rate upper limit is determined by overlapping per-pixel particle signals, identifiable by the hits per pixel counter > 2, indicating the need to decrease acquisition time. On the other hand, the lower limit is the time required to collect the particle deposited charge while maintaining spectral properties. Different acquisition times were evaluated for an AdvaPIX Timepix3 detector (500 μm Silicon sensor) with standard per-pixelDigital to Analog Converter (DAC)settings and a Minipix Timepix2 detector (300 μm Silicon sensor) with standard and customized settings the pulse shaping parameter and threshold. For AdvaPIX Timepix3, spectra remained accurate down to 100 μs frame acquisition time; at 10 μs, loss of collected charge occurred, suggesting either avoiding this acquisition time or applying a correction. Timepix2 allowed acquisition times down to 100 ns for single particle track measurements even for high energy loss, enabled by a new Timepix2 feature delaying shutter closure until full particle charge collection. This work represents the first measurement utilizing Timepix-chips pixel detectors in an accelerator beam of clinical energy and intensity without the need to decrease the beam current. This is made possible by exploiting the short shutter feature in Timepix2 and a customized per-pixel energy calibration of the Timepix2 detector with a larger discharging signal value which allowed for shorterTime-over-Threshold (ToT)signal. These customized settings extend the operation of the pixel detectors to higher event rates up to 109 particles/cm2/s.

A deep learning model for predicting the modified micro-dosimetric kinetic model-based dose and the dose-averaged linear energy transfer for prostate cancer in carbon ion therapy

A deep learning model for predicting the modified micro-dosimetric kinetic model-based dose and the dose-averaged linear energy transfer for prostate cancer in carbon ion therapy

Development of a Tumor Growth-responsive Robust Planning Method for Head and Neck Cancer in Carbon-ion Radiotherapy.

The current study aimed to evaluate a treatment planning method that is robust against tumor growth and to assess its effectiveness in particle therapy for head and neck cancer. The proposed method optimizes dose distribution by replacing the relative stopping power ratio (rSPR) of the clinical target volume (CTV) cavity region with a tumor-equivalent rSPR (Condition 1). The optimized initial treatment plan template was then recalculated using in-room CT images acquired in the same treatment position, and the doses to the tumor and organs at risk were compared with those in the initial treatment plan. We evaluated this method in 10 patients with head and neck cancer treated with carbon ion radiotherapy. To evaluate the effectiveness of the proposed method, we compared it to the initial treatment plan without the replacement (Condition 2). CTV V95% reduction relative to that of the initial treatment plan at the end of treatment was 1.3%±2.9% and 2.6%±3.7% for Condition 1 and Condition 2, respectively, with Condition 1 (Replacement condition) providing better CTV coverage. Subgroup analysis showed a higher change in target coverage in the mucosal melanoma than in the adenoid cystic carcinoma, suggesting that this was influenced by the rate of tumor growth. The proposed treatment planning method, which adjusts for tumor growth by modifying the rSPR in the cavity region, improved robustness in carbon ion radiotherapy for head and neck cancer. Condition 1 (with replacement) achieved better CTV coverage than Condition 2 (without replacement), particularly in fast-growing tumors like mucosal melanoma. This method ensures consistent dose delivery to tumors while maintaining safe doses to organs at risk, offering potential for improved treatment outcomes.

The effect of different additives on bacteria adsorption, compressive strength and ammonia removal for MICP

Abstract Microbial induced calcite precipitation is a commonly used technique for the application of biocementation. The metabolism of urea by ureolytic active bacteria leads, among other metabolic products such as ammonium, to carbonate ions. In the presence of calcium ions, calcium carbonate formation occurs. It was investigated whether the addition of different additives (Ca-bentonite, Na-bentonite, clinoptilolite, natrolite, limestone, marl clay, concresol, secursol, and activated carbon powder) can optimize this process. First, the influence of these additives on the adsorption rates and distribution of the ureolytic active organism Sporosarcina pasteurii in quartz sand columns was tested. Moreover, an investigation was conducted on the impact of various additives on ammonium immobilization to mitigate its leaching from soils subjected to the biocementation process. For eight additives uniaxial compressive strength tests in quartz sand columns and a storage method according to DIN EN 12390–2 were carried out. Each additive showed a characteristic adsorption and localisation progression. Furthermore, each additive was able to enhance the immobilization behavior of the present ammonium, with a maximum immobilization capacity of 10.76 $$\frac{mg (NH^+_4)}{g (additive)}$$ m g ( N H 4 + ) g ( a d d i t i v e ) . The uniaxial compressive strength of biocemented columns out of quartz sand could sectionally be increased by the addition of each additive. However, the storage methodology shows a much greater influence on column strength. Overall, the best results were achieved with the two additives, Ca-bentonite and clinoptilolite, resulting in strength increases in sand columns of up to 4.64 and 3.22 $$\frac{N}{mm^2}$$ N m m 2 , respectively.

Downregulation of CTRP1 Reduces Radio-resistance in Glioblastoma Cells by Inhibiting the Expression of CD133 after X-ray and Carbon Ion Irradiation

Glioblastomas (GBMs), the most prevalent primary malignant brain tumors, present significant challenges due to their invasive nature, high recurrence rates, and limited treatment options. Radiotherapy is a cornerstone in the management of GBMs; however, resistance to treatment poses a substantial obstacle. This study investigates the role of adipokine C1q/TNF-related protein 1 (CTRP1) in the radio-sensitivity of GBMs, utilizing both X-ray and carbon ion irradiation. Expression analyses revealed elevated CTRP1 and CD133 levels in GBMs tissues, which were associated with poor patient survival. Carbon ion irradiation demonstrated superior growth inhibition compared to X-ray, particularly in U87 (high CD133) cells. Moreover, CTRP1 expression increased following radiation exposure, especially after X-ray treatment. Knockdown of CTRP1 enhanced radio-sensitivity by reducing cell proliferation and increasing apoptosis, while exacerbating oxidative stress. Bioinformatics analysis revealed CTRP1's involvement in DNA damage repair pathways. Our findings establish a novel connection between CTRP1 and cellular radio-sensitivity. Targeting CTRP1, especially in U87 (high CD133) cells, enhances GBMs radio-sensitivity, offering potential therapeutic avenues.

Verification of Calculation for the Protection of the Medical Cabin for Ion Therapy of Channel 26A of the Luch U-70 Project

Currently, the experience in designing installations using extracted carbon ion beams in Russia (the world) is very limited. The medical cabin for ion therapy of channel 26A of the LUCH U-70 project provides a unique opportunity for assessing the effectiveness of biological protection and verifying calculations. The paper presents data from experimental measurements of neutron radiation behind the biological protection of a medical cabin. The data were obtained for two energies of the extracted beam of accelerated carbon nuclei - 400 and 450 MeV/nucleon. The result is compared with the calculation performed using the FLUKA program for a given protection configuration. Good agreement between experimental data and calculations is shown.

Monitoring and Control of Irradiation with Carbon Ions During Radiobiological Experiments at the RBS Experimental Set-Up

The RBS experimental set-up has been working in every accelerator session of the U-70 accelerator complex since 2015. The main users of the set-up are radiobiologists and physicians. The direction of research is radiobiological experiments with extracted beams of accelerated carbon ions and preclinical studies aimed at the development of domestic methods of ion therapy. The requirements for irradiation of samples with carbon ions are very high: irradiation uniformity is no worse than 95%, positioning accuracy is no worse than 0.1 mm, dose delivery accuracy is no worse than ±2.5%. The article describes the instruments and devices that are used to support radiobiological experiments at the RBS installation: a plane-parallel ionization chamber, a mosaic ionization chamber, a water phantom with a 3D movement system, a 6-axis table, a degrader, a laser positioning system, clinical dosimeters. Programs for working with this equipment and archiving the data obtained are described.