Capillary Electrochromatography Research Articles

Effective enrichment and separation of three flavonoids from Ohwia caudata (Thunberg) H. Ohashi using magnetic layered double hydroxide/ZIF-8 composites and pCEC

In this study, Fe3O4@ZnCr–layered double hydroxide/zeolitic imidazolate frameworks-8 (MLDH/ZIF-8) magnetically functionalized composites were synthesized by co-precipitation and in situ growth based on the advantages of LDHs and ZIF-8 using Fe3O4 nanoparticles as a magnetic substrate to obtain adsorbents with excellent performance. Moreover, the composite was used for the efficient enrichment of flavonoids in Chinese herbal medicines. The internal structures and surface properties were characterized by SEM, Fourier transform infrared spectroscopy, X-ray diffraction and so on. MLDH/ZIF-8 exhibited a large specific surface area and good paramagnetic properties. The MLDH/ZIF-8 magnetic composite was used as a magnetic solid-phase extraction (MSPE) adsorbent, and a MLDH/ZIF-8 MSPE–pressurized capillary electrochromatography coupling method was developed for the separation and detection of flavonoids (luteolin, kaempferol and apigenin) in a sample of the Chinese herb Ohwia caudata (Thunberg) H. Ohashi. The relevant parameters affecting the extraction efficiency were optimized to determine the ideal conditions for MSPE. 5 mg of adsorbent in sample solution at pH 6, vortex extraction for 5 min, elution with 1.5 mL of ethyl acetate for 15 min. The method showed good linearity in the concentration range of 3–50 μg mL−1 with correlation coefficients of 0.9934–0.9981, and displayed a relatively LODs of 0.07–0.09 μg mL−1. The spiked recoveries of all analytes ranged from 84.5% to 122.0% with RSDs (n=3) between 4.5% and 7.7%. This method is straightforward and efficient, with promising potential in the separation and analysis of active ingredients in various Chinese herbal medicines.

Exploring the performance of cellulose tris-3,5-dichlorophenylcarbamate as a stationary phase for the chiral electro-chromatographic separation of azole antifungals

In this study, the enantiorecognition and separation performance of cellulose tris-3,5-dichlorophenylcarbamate (CDCPC) as the chiral selector for the enantioseparation of some chiral antifungal compounds was investigated. The CDCPC was bonded to 5 µm porous silica particles and the stationary phase packed into fused silica capillaries (250 mm x 75 µm I.D.) using the "slurry method". The column was used for the separation of twelve selected azole compounds in their enantiomers by capillary electrochromatography (CEC). To study chiral recognition, the mobile phase was modified changing the organic solvent, water content, buffer type, concentration, and pH. Each change resulted in the enhancement of specific interactions at the expense of others, leading to chiral recognition. Their effects on retention factors, enantiomeric resolution, and peak broadening are critically discussed. The developed methodology was used as an appropriate test bench to evaluate the stability of the stationary phase under different mobile phase conditions, demonstrating a remarkable enantioselective capacity even after several tens of hours of continuous use. The optimized CEC-UV method was very effective in the enantiomeric separation of seven out of twelve azole fungicides, totaling fourteen separated peaks in a single 30 min run analysis.

Enantiomeric analysis of chiral phenyl aromatic compounds by coated capillary electrochromatography based on aMOF-on-MOF stationary phase.

Chiral phenyl aromatic compounds (CPACs) are widely used in drug development, food/cosmetic production, and other organic synthesis processes, and their different enantiomers have distinct physiological activities and application differences. A double-layer metal-organic framework composite (MOF-on-MOF) was obtained by in situ synthesis of chiral metal-organic framework (CMOM-3S) on the surface of an iron-based metal-organic framework (NH2-MIL-101(Fe)). According to ourinvestigation, MOF-on-MOF composite was for the first time applied tothe stationary phase of capillary electrochromatography (CEC), and enantioseparations of eight CPACs were accomplished. Compared with single CMOM-3S, the enantioseparation performance of the coated capillary columns based on NH2-MIL-101(Fe)@CMOM-3S was improved by 34.07 ~ 720.0%. The R-/S-mandelic acid in actual sample (apricot leaves) was detected by the newly CEC system to be 0.0118mgmL-1 and 0.0523mgmL-1, respectively. The spike recoveries were 96.60 ~ 104.7%, indicating its good stability and accuracy. In addition, the selective adsorption capacity of MOF-on-MOF composites was verified by adsorption experiments.

Chiral zeolite beta used as stationary phase for enantioseparation in miniaturized open tubular capillary electrochromatography with amperometric detection

BackgroundWith the rapid growth of the demand for optically pure compounds in the fields of biology, medicine and stereospecific synthesis, it is of great importance to develop efficient, economical, simple enantioseparation and analysis methods. Open tubular capillary electrochromatography (OT-CEC) has attracted much attention in the field of chiral separation, but its column capacity and the sensitivity of common-used optical detection are relatively low. Zeolite beta nanomaterial is both enantioselective and size-selective, providing suitable chiral microenvironment for chiral recognition, and amperometric detection (AD) avoids the low sensitivity caused by the short optical path in optical detection to some extent. ResultsZeolite beta nanomaterials with different particle sizes (25, 50 and 200 nm) were synthesized, and the morphology and structure were characterized by scanning electron microscopy and X-ray diffraction. Then, a novel chiral OT column was prepared by one-step method using zeolite beta nanomaterial as chiral stationary phase, and its separation performance was characterized by miniaturized CEC with AD (mini-CEC-AD) device. Under the optimum conditions, six groups of chiral drugs achieved baseline separation. Norepinephrine enantiomers were used for evaluating the inter-day, intra-day and inter-column reproducibility of the prepared open-tubular column. The relative standard deviations of migration time, peak area, resolution and selectivity factor were within 8.7 %. The limits of detection for norepinephrine enantiomers were 0.18 μg mL−1 (S/N = 3), and the average recoveries were in range of 96.7–105.0 %. This developed method has been successfully applied to the analysis of impurity enantiomer in potassium dichromate (+)-norepinephrine injection sample. SignificanceZeolite beta nanomaterial was used as the stationary phase to prepare chiral OT columns for the first time, and this one-step preparation method is simple and easy. The introduction of zeolite beta enriches the types of chiral stationary phase materials in electrochromatographic columns, and mini-OT-CEC-AD system provides an alternative for fast enantioseparation of chiral compounds.

Multilayer coatings based on gold nanoparticles and polymers with bovine serum albumin as a functional layer for the chiral separation in capillary electrochromatography.

In this study, we developed physically adsorbed multi-layer coatings using poly-l-lysine or poly(diallyldimethylammonium chloride) and gold nanoparticles, which were functionalized with bovine serum albumin for the chiral separation in electrochromatography. The approach involves sequentially depositing positively charged polymers and negatively charged citrate-stabilized gold nanoparticles. By repeating this modification cycle, we created two- and four-layer coatings, which were sequentially functionalized with albumin forming three- and five-layer coatings that were finally applied for the separation of enantiomers of dl-tryptophan. The formed coatings exhibit stability across a pH range of 2-10 and feature a dense, uniform surface, as confirmed by scanning electron microscope images. The number of layers impacted nanoparticle deposition density, with five-layer coatings being denser than three-layer ones. Five-layer coatings enable baseline separation of dl-tryptophan enantiomers, whereas three-layer coatings require the presence of albumin in the background electrolyte for separation. Therefore, increasing the number of layers and gold nanoparticles density enhances albumin active center concentration on capillary walls, improving the separation of dl-tryptophan enantiomers. The five-layer coatings can be easily fabricated and possess good repeatability of analytes migration time.

In situ growth of imine-based covalent organic framework as stationary phase for open-tubular capillary electrochromatographic separation.

Designing advanced stationary phases to improve separation efficiency is essential in capillary electrochromatography. Due to their outstanding performance, covalent organic frameworks have recently demonstrated considerable promise in the field of separation science. Herein, an open-tubular capillary electrochromatography method was reported using porous imine-based covalent organic framework with sufficiently available interaction sites as stationary phase. The imine-based covalent organic framework coated capillary was easily prepared via an in situ growth method at room temperature, and its separation performance was evaluated, indicating the high separation efficiency for three types of analytes, including herbicides, polybrominated dibenzofurans, and bisphenols. Moreover, the imine-based covalent organic framework coated capillary showed good reproducibility and stability, with intraday (n=3), interday (n=3), and column-to-column (n=3) relative standard deviations of retention time and peak areas of less than 5%. The separation efficiency of the coated capillary remained unchanged even after 200 runs and the maximum theoretical plates reached up to 85595 N/m for 4,4'-ethylidenebisphenol. It was predicted that the imine-based covalent organic framework stationary phase would be a strong contender for chromatographic separation with high efficiency.

Facile room-temperature synthesis of a spherical mesoporous covalent organic framework for capillary electrochromatography

Herein, a spherical covalent organic framework COF TAPB-DMTP was facilely synthesized from 2,5-dimethoxyterephthalaldehyde (DMTP) and 1,3,5-tri-(4-aminophenyl)benzene (TAPB) as monomers. COF TAPB-DMTP with regular mesoporous and excellent mass transfer ability was first introduced into the capillary and immobilized on the inner wall of the capillary through a simple in situ growth method. Through various characterization results, COF TAPB-DMTP was successfully prepared and modified onto the capillary inner wall. The separation performance and potential of COF TAPB-DMTP modified capillary column was explored. The new developed COF modified column achieved a highly efficiency and selective separation between analytes with different properties, including halogeno benzenes, alkylbenzenes, phenols and sulfonamides. Satisfactory stability and reproducibility were observed on COF TAPB-DMTP modified columns. The intraday, interday and three batch columns relative standard deviations were all less than 1.85 % for the retention time. The separation performance of prepared column has no significant change after 90 continuous runs. Additionally, the COF TAPB-DMTP modified capillary column was successfully used for separation and detection of triazole antifungal drugs in human plasma, and the recoveries of three antifungal drugs (fluconazole, isavuconazole and posaconazole) in spiked samples were in the range of 98.6–100.8 %, 92.4–102.1 % and 99.9–107.5 %, respectively. This self-made column showed excellent application potential in chromatography separation science.

Rapid and in-situ preparation COFs coated capillary by adsorption method for the separation and determination of phthalate ester using CEC

As a novel class of stationary phase materials, covalent organic frameworks (COFs) have shown great promise in open-tubular capillary electrochromatography. However, the current preparation of COFs coating capillaries heavily relies on tedious and time-consuming covalent bond methods. In this work, a novel, simple and rapid adsorption method was developed for fabrication of TPB-DMTP COF (fabricated from 1,3,5-tris(4-aminophenyl)benzene (TPB) and 2,5-dimethoxyterephthalaldehyde (DMTP)) coated capillary. Due to the crystallization process of the COF is greatly shortened because pre-modification capillary does not require silane coupling agent, this method enables the rapid preparation of COFs-coated capillaries. The organic molecular building units only need 25 min to form a stable COFs coating on the inner wall of a capillary by this method. To our knowledge, this is the shortest method for preparing COFs coated capillary up to now. The performance of the TPB-DMTP COF coated capillary was evaluated by using phthalate esters as model analytes. The results demonstrated that the TPB-DMTP COF coated capillary has excellent repeatability and stability. The relative standard deviations (RSDs) of the analyte's retention time of intra-day, inter-day and column-to-column were in the range of 0.05 %–0.27 %, 0.31 %–0.63 % and 0.31 %–0.88 %, respectively. And, no significant changes were observed in separation efficiency and retention time after over 200 runs. Finally, the TPB-DMTP COF coated capillary was applied for the determination of phthalates in marketed plastic bag and the recovery ranged from 88.0 % to 114.0 %.

Itaconic Acid-Based Organic-Polymer Monolithic Column for Hydrophilic Capillary Electrochromatography and Its Application in Pharmaceutical Analysis.

Itaconic acid is an excellent hydrophilic monomer owing to the dicarboxylic group possessing strong polarity. This study reports on the preparation of a new organic-polymer monolithic column poly(itaconic acid-co-3-(acryloyloxy)-2-hydroxypropyl methacrylate) (poly(IA-co-AHM)) featuring excellent hydrophilic chromatography ability and its application in pharmaceutical analysis. The monolithic column was successfully synthesized by using the monomer itaconic acid and the cross-linker AHM through an in situ copolymerization method. Optical microscopy, scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR) were employed for the characterization of the poly(IA-co-AHM) monolithic column, and all of these demonstrated that the prepared itaconic acid-based monolithic column exhibited satisfactory permeability and a homogeneous porous structure. Owing to the carboxylic groups of itaconic acid, a cathodic electroosmotic flow (EOF) was generated on the itaconic acid-based monolithic column among the pH ranges of the mobile phase from 4.0 to 9.0. Depending on the powerful hydrophilic interactions, different kinds of polar substances, including thioureas, nucleoside drugs, sulfonamides, and polypeptides, were separated efficiently by the itaconic acid-based monoliths poly(IA-co-AHM). The separations of polar compounds were successfully realized, even at a lower level of 50% acetonitrile content on this monolithic column. The highest column efficiencies corresponding to N,N'-dimethylthiourea and idoxuridine were 102 720 and 124 267 N/m, respectively. The poly(IA-co-AHM) monolithic column displayed excellent repeatability, whose relative standard deviations (RSDs) of the retention time and peak area were both lower than 5.0%. All experimental results demonstrated that the new itaconic acid-functionalized monolithic column was greatly appropriate to separate the polar compounds under the HILIC mode.

Open tubular capillary electrochromatography with dual-responsive polymer as coating for separation of chromones

Fabricating polymeric coatings that are responsive to multiple/dual stimuli is crucial and remains a major challenge in the development of highly efficient open tubular capillary electrochromatography (OT-CEC). In this study, a pH and temperature-responsive block copolymer, poly(styrene-maleic anhydride 2-dimethylamino ethyl methacrylate), P(St-MAn-DMAEMA), was designed and synthesized. Using P(St-MAn-DMAEMA) as the coating, an OT-CEC protocol was constructed for the analysis of chromones. The morphology and hydrophobicity-hydrophilicity of the polymeric coating could change via varying the environmental conditions, affecting the separation efficiency of OT-CEC. Interestingly, the best performance of OT-CEC was achieved at pH 9.7 and 45 °C via tuning the interactions between the coating and the analytes. Additionally, the proposed OT-CEC method exhibited a good linear range for the detection of the three test chromones from 10.0 to 100.0 μM, with all correlation coefficients (R2) >0.997. The coatings also had good stability and reusability. This work provides an approach for the preparation of new multiple-stimuli-responsive polymeric coatings for the establishment of OT-CEC systems.

Organic-silica hybrid monolithic sorbents for sample preparation techniques: A review on advances in synthesis, characterization, and applications

Organic-silica hybrid monolithic materials have attracted considerable attention as potential stationary phases in separation science. These materials combine the advantages of organic polymer and silica-based monoliths, including easy preparation, lower back pressure, high permeability, excellent mechanical strength, thermal stability, and tunable surface chemistry with high surface area and selectivity. The outstanding chromatographic efficiency as stationary phase of hybrid monolithic capillary columns for capillary liquid chromatography and capillary electrochromatography has been reported in many papers. Organic-silica hybrid monolithic materials have also been extensively used in the field of sample preparation. Owing to their surface functionalities, these porous sorbents offer unique selectivity for pre-concentration of different analytes in the most complex matrixes by fast dynamic transport. These sorbents not only improve the analytical method sensitivity, but also introduce novelties in terms of extraction devices and instrument coupling strategies. The current review covers the period spanning from 2017 to 2023 and describes the properties of organic-inorganic hybrid monolithic materials, the present status of this technology and summarizes recent developments in their use as innovative sorbents for microextraction sample preparation techniques (solid phase microextraction with pipette tip, offline in-tube SPME, in-tube SPME online with LC, and in-tube SPME directly coupled with mass spectrometry). Aspects such as the synthesis methods (sol–gel process, one-pot approach, and polyhedral oligomeric silsesquioxanes-based procedure), characterization techniques, and strategies to improve extraction efficiency in various applications in different areas (environmental, food, bioanalysis, and proteomics) are also discussed.

Recent developments in the application of covalent organic frameworks in capillary electrochromatography

Capillary electrochromatography (CEC) has received increased attention from the academic community because it combines the excellent selectivity of high performance liquid chromatography (HPLC) and the high efficiency of capillary electrophoresis (CE). Selecting the most appropriate stationary phase material is crucial to achieve better separation effects in CEC. In recent years, a considerable number of materials, such as graphene oxide, proteins, metal organic frameworks, and covalent organic frameworks (COFs), have been widely used as stationary phases in CEC to further improve its separation performance and extend its scope of potential applications. Among these materials, COFs have shown great application prospects in CEC owing to their unique properties, which include high porosity, large surface area, excellent stability, tunable pore size, and high designability of the framework structure. This review systematically summarizes published papers on the development and application of COFs in CEC from 2016 to 2023. First, two COF-based capillary columns (i. e., open-tube CEC columns and monolithic CEC columns) and their preparation methods are introduced. Second, the applications of CEC based on COF stationary phases in the separation of environmental endocrine disruptors, pesticides, aromatic compounds, amino acids, and drugs, particularly chiral drugs, are systematically summarized. The separation mechanism of CEC based on COF stationary phases is also introduced. At present, the good separation ability of COF-based CEC is mainly attributed to two factors: 1) The size exclusion effect of the pores of the COF stationary phase. Because of differences in the sizes of their organic molecular building units and side chains, COFs have varying pore sizes and topological structures. Thus, target analytes smaller than the pores of the COFs can enter the frameworks and interact with them during separation. On the other hand, target analytes larger than the pores of the COFs cannot enter the frameworks and interact with them during separation; thus, they can be separated. 2) The interactions between the target analytes and side chains (e. g., hydrophobic interactions, hydrogen bonding, π-π interactions, etc.) of the COFs. Since COFs usually contain alkyl side chains, aromatic structures, and oxygen and/or nitrogen atoms with high electronegativity, various interactions could occur between the COFs and target analytes. Finally, directions for the future development and strategic application of CEC based on COF stationary phases are proposed. We believe that future research in CEC based on COF stationary phases should focus on the following aspects: 1) The use of cheminformatics to design and construct COFs to improve the efficiency of COF capillary column preparation; 2) the development of milder methods to synthesize COFs that can meet the requirements of high performance COF capillary columns; and 3) in-depth research to explore the separation mechanism of CEC based on COF stationary phases to provide theoretical guidance for developing CEC methods suitable for the separation and analysis of complex samples.

Research progress on the construction and applications of metal-organic frameworks in chromatographic stationary phases

Metal-organic frameworks (MOFs) are a class of porous crystalline materials composed of metal centers or clusters assembled with organic ligands. These materials possess excellent properties, such as large surface areas, high porosities, uniform pore sizes, and diverse structures. Thus, MOFs have been widely applied in various fields, including catalysis, adsorption, sensing, sample pretreatment, and chromatographic separation. The applications of MOFs as stationary phases for chromatographic separation and analysis have attracted considerable attention from the research community in recent years. Compared with traditional chromatographic stationary phases, such as mesoporous silica, nanoparticles, and porous layers, MOFs possess flexible and tunable pore sizes and structures, thereby enabling precise control over their intermolecular interactions. Furthermore, the wide range of functional ligands and topologies of MOFs could potentially facilitate the separation and analysis of complex samples. These unique advantages render MOFs highly suitable for constructing novel chromatographic stationary phases.This article focuses primarily on the construction methods of MOFs as chromatographic stationary phases, and provides an overview of the latest research advancements in their applications in several chromatographic separation techniques such as high performance liquid chromatography (HPLC), gas chromatography (GC), and capillary electrochromatography (CEC). The existing methods for the preparation and construction of MOFs-based chromatographic stationary phases are classified and evaluated. The construction methods for MOFs as stationary phases for HPLC mainly include filling, precursor-doped polymerization, and post-modification. The construction methods for MOFs as stationary phases for GC predominantly include in situ growth, static coating, and dynamic coating. The stationary phases for CEC can be categorized into packed columns, monolithic columns, and open-tubular columns. Compared with monolithic and packed columns, open-tubular CEC (OT-CEC) offers numerous advantages, including a more flexible and convenient preparation method, enhanced compatibility with various separation media, and higher separation efficiency. Consequently, OT-CEC has emerged as an important method for investigating the preparation of stationary phases for CEC. Several methods such as physical adsorption, covalent attachment, and electrostatic interactions have been developed for the preparation and modification of MOFs-based CEC stationary phases, and extensive studies have been conducted to optimize the performance and applications of MOFs in OT-CEC. However, the existing methods for constructing MOFs-based chromatographic stationary phases present certain limitations. Therefore, the selection of the appropriate MOFs, optimization of their preparation methods, and examination of their performance in different separation modes have become the focus of intensive research.This review also summarizes the different analytical targets (e. g., chiral small molecules, biomacromolecules, and nonchiral molecules) and corresponding separation effects achieved using various MOFs-based chromatographic stationary phases. Finally, future studies focusing on the development of MOFs as chromatographic separation media are discussed. Overall, this review provides a valuable reference for the rational construction and practical applications of advanced MOFs-based chromatographic stationary phases.

Recent advances in carbon dots-based chromatographic separation materials

Chromatographic column is the core of chromatographic separation, and chromatographic separation material is considered the soul of the chromatographic column. The type and characteristics of the chromatographic separation material directly determine the separation mode and performance of chromatographic columns. The development and preparation of separation materials with novel structures and good separation performance is an ongoing hotspot in chromatography research. Given rapid developments in nanoscience and technology, nanomaterials with unique surface functional groups and large specific surface areas have attracted extensive attention and great interest from researchers in the field of separation science. Carbon dots (CDs), a new type of zero-dimensional fluorescent carbon nanomaterials, have been widely used in bioimaging, light-emitting diodes, sensing, catalysis, drug delivery, and other applications since they were first reported in 2004. These nanomaterials present several advantages over other types of separation materials, including a simple preparation process, low toxicity, easy functionalization, excellent biocompatibility, and photobleaching resistance. In addition, compared with traditional carbon nanomaterials such as graphene and carbon nanotubes, CDs have abundant surface functional groups, nanoscale sizes, and moderate adsorption properties. Hence, when CDs-based new materials are applied as a stationary phase for column chromatography, they can provide rich reaction sites and ensure the uniformity of the chromatographic packing process. The use of CDs can effectively avoid the peak-tailing phenomenon caused by the strong interaction of large π-conjugated systems with some analytes and improve the efficiency of the chromatographic column. As such, these nanomaterials show good application prospects in the field of chromatographic separation. In this review, the development history, classification, and synthesis strategies of CDs are briefly described. We then focus on the development of CDs-based chromatographic separation materials by systematically reviewing the recent advances in the use of CDs-based materials as a stationary phase for high-performance liquid chromatography (including hydrophilic interaction, reversed-phase, mixed-mode, and chiral chromatography), gas chromatography, and capillary electrochromatography, with special emphasis on the preparation methods and applications of various stationary phases. Finally, the development prospects of CDs and future research efforts on these materials are also analyzed and discussed. This review can provide guidance on the rational design and application of new CDs-based chromatographic separation materials.

Preparation of porous organic cage and its use as chiral stationary phase for capillary electrochromatography

Porous organic cages (POCs) are a unique type of microporous materials composed of discrete molecules with internal cavities that are accessible to various compounds. In this study, a prismatic chiral POC with good thermochemical stability was synthesized by condensing (1R,2R)-diaminocyclohexane and 3,3',5,5'-teturonic-4,4'-biphenediol via the Schiff base reaction and characterized by proton nuclear magnetic resonance spectroscopy, infrared (IR) spectroscopy, thermogravimetric analysis (TGA), and scanning electron microscopy. The IR spectrum of the POC revealed a strong characteristic absorption peak at 1635 cm-1, indicating that it formed imine bonds (C=N). The absorption peak at 3425 cm-1 was attributed to the stretching vibrations of -OH, the absorption peaks at 2925 and 2858 cm-1 were attributed to the stretching vibrations of N=C-H and C-H, and the absorption peaks at 1446 and 1383 cm-1 were attributed to the stretching vibrations of C=C-H and C=C in the benzene ring. High-resolution mass spectral analysis of the POC showed a molecular ion peak at m/z 1363.7228, indicating its successful synthesis. TGA was performed from 25 to 800 ℃ at a rate of 10 ℃/min, and the results of this analysis showed that the POC was stable up to approximately 300 ℃. The POC was dissolved in dichloromethane and uniformly coated on the inner wall of a quartz capillary via the dynamic coating method to prepare a capillary electrochromatographic column. The experimental results revealed that the chiral electrochromatographic column could not only resolve ofloxacin, Troger's base, 2-amino-1-butanol, and 1-phenyl-1-amyl alcohol but also separate the isomers of o-, m-, and p-toluidine and o-, m-, and p-chloroaniline, indicating its good chiral separation ability. Investigation of the optimal separation conditions for ofloxacin, Troger's base, 2-amino-1-butanol, and 1-phenyl-1-amyl alcohol revealed that the voltage, buffer solution concentration, and pH significantly affected their separation degree. In particular, the optimal separation voltage for ofloxacin, Troger's base, and 2-amino-1-butanol was 15 kV, while that for 1-phenyl-1-amyl alcohol was 17 kV. The optimal buffer concentration and pH for ofloxacin, Troger's base, 2-amino-1-butanol, and 1-phenyl-1-amyl alcohol were 0.100 mol/L and 7.5. Under optimal chromatographic conditions, the resolution values for ofloxacin, Troger's base, 2-amino-1-butanol, and 1-phenyl-1-pentanol were 1.80, 3.33, 1.69, and 1.18, respectively. The results collectively demonstrate that the prepared POC may serve as a good chiral stationary phase for capillary electrochromatography with a certain chiral resolution ability and has good application prospects in chromatographic separation.

Sulfonic acid functionalized monolithic column for high selectivity capillary electrochromatography separation.

A new nano-scale spherical vinyl-functionalized covalent organic polymer (TAPT-DVA-COP) with uniform sizes around 300nm was initially constructed using 2,5-divinyl-1,4-benzaldehyde (DVA) and 2,4,6-tris(4-aminophenyl)-1,3,5-triazine (TAPT) as monomers. Then, a sulfonic acid (-SO3H) modified COP termed COP-SO3H was developed based on post-sythesis method employing TAPT-DVA-COP as precursor. Capillary electrochromatography (CEC) monolithic columns were fabricated using the physical doping technique to exhibit the application potential of TAPT-DVA-COP and COP-SO3H. Compared to the TAPT-DVA-COP monolithic column, the COP-SO3H monolithic column achieved a highly selective separation between analytes with different properties, including monosubstituted benzenes, alkylbenzenes, hydroxybenzoates, nucleoside bases, and biogenic amines. Non-covalent interaction (NCI) analysis and experimental data show that the synergism of the sulfonic acid group and aromatic moieties on COP-SO3H endows the new stationary phase with diverse interactions, including ion exchange, hydrophobic, π-π and hydrogen bonding. In addition, the COP-SO3H monolithic column exhibited good reproducibility and excellent potential for the determination of hydroxybenzoates in compact powders and alkylbenzenes in effluent samples.

Emerging Developments in Separation Techniques and Analysis of Chiral Pharmaceuticals.

Chiral separation, the process of isolating enantiomers from a racemic mixture, holds paramount importance in diverse scientific disciplines. Using chiral separation methods like chromatography and electrophoresis, enantiomers can be isolated and characterized. This study emphasizes the significance of chiral separation in drug development, quality control, environmental analysis, and chemical synthesis, facilitating improved therapeutic outcomes, regulatory compliance, and enhanced industrial processes. Capillary electrophoresis (CE) has emerged as a powerful technique for the analysis of chiral drugs. This review also highlights the significance of CE in chiral drug analysis, emphasizing its high separation efficiency, rapid analysis times, and compatibility with other detection techniques. High-performance liquid chromatography (HPLC) has become a vital technique for chiral drugs analysis. Through the utilization of a chiral stationary phase, HPLC separates enantiomers based on their differential interactions, allowing for the quantification of individual enantiomeric concentrations. This study also emphasizes the significance of HPLC in chiral drug analysis, highlighting its excellent resolution, sensitivity, and applicability. The resolution and enantiomeric analysis of nonsteroidal anti-inflammatory drugs (NSAIDs) hold great importance due to their chiral nature and potential variations in pharmacological effects. Several studies have emphasized the significance of resolving and analyzing the enantiomers of NSAIDs. Enantiomeric analysis provides critical insights into the pharmacokinetics, pharmacodynamics, and potential interactions of NSAIDs, aiding in drug design, optimization, and personalized medicine for improved therapeutic outcomes and patient safety. Microfluidics systems have revolutionized chiral separation, offering miniaturization, precise fluid control, and high throughput. Integration of microscale channels and techniques provides a promising platform for on-chip chiral analysis in pharmaceuticals and analytical chemistry. Their applications in techniques such as high-performance liquid chromatography (HPLC) and capillary electrochromatography (CEC) offer improved resolution and faster analysis times, making them valuable tools for enantiomeric analysis in pharmaceutical, environmental, and biomedical research.

Construction of chiral capillary electrochromatography microsystems based on Aspergillus sp. CM96.

Novel chiral capillary electrochromatography (CEC) microsystems were constructed based on Aspergillus sp. CM96. As a newly discovered intrinsic characteristic of the cell, cell chirality occupies an essential position in life evolution. Aspergillus sp. CM96 spore (CM96s) was chosen as a proof of concept to develop chiral capillary columns. Interestingly, various types of amino acid (AA) enantiomers were baseline separated under the optimized conditions. Furthermore, the time-dependent chiral interactions between AAs and CM96s were explored in a wider space. Pectinases generated from Aspergillus sp. CM96 fermentation were immobilized onto graphene oxide-functionalized capillary silica monoliths for separating AA enantiomers. Molecular docking simulations were performed to explore chiral separation mechanisms of pectinase for AA enantiomers. These results indicated that Aspergillus sp. CM96-based CEC microsystems have a significant advantage for chiral separation.

Review of recent advances in development and applications of organic-silica hybrid monoliths.

Organic-silica hybrid monoliths attracted attention as an alternative to extensively researched organic polymer-based and silica-based counterparts. The development and applications of these materials as extraction and separation media in capillary liquid chromatography and capillary electrochromatography were previously reviewed in several manuscripts. In this review, we will concentrate on work published since mid-2016 focusing on advances in their development using sol-gel chemistry of tetra- and trialkoxysilanes and subsequent surface modification with organic monomers, and "one-pot" strategy incorporating sol-gel chemistry of alkoxysilanes and free-radical polymerization, ring-opening polymerization, or thiol-based click polymerization with organic monomers. Approaches adapted to the preparation of hybrid monoliths made with polyhedral oligomeric silsesquioxanes will be covered as well.

Three-dimensional fluorinated covalent organic frameworks coated capillary for the separation of fluoroquinolones by capillary electrochromatography

In this work, a three-dimensional fluorinated covalent organic frameworks (3D FCOFs) JUC-515 was synthesized from tetra(4-aminophenyl)methane (TAM) and 2,3,5,6-tetrafluoroterephthalol (TFA) by an ionic liquid method. JUC-515 was introduced into the capillary column and bonded to the inner wall of the capillary column by chemical bonding. Through a variety of characterization results, JUC-515 was successfully synthesized and introduced into the capillary column. The effects of buffer solution concentration, organic additive content and pH of the buffer solution on the separation of fluoroquinolones (FQs) were investigated in detail. The JUC-515-coated capillary column showed good resolution (>1.5) and reproducibility. The relative standard deviations (RSDs) of the retention time for intraday, interday, column-to-column and interbatch precision were less than 0.88%, 2.45%, 2.74% and 3.32%, respectively. The RSDs of the peak area for intraday, interday, column-to-column and interbatch precision were less than 3.79%, 4.31%, 3.33% and 5.62%, respectively. The JUC-515-coated capillary column could be used no less than 150 times. The results showed that the JUC-515-coated capillary column had good separation performance. In addition, by separating fluorinated β-phenylalanine analogs, β-phenylalanine and trifluoromethyl β-phenylalanine analogs, the separation mechanism based on fluorine interactions was discussed. In conclusion, JUC-515 had good potential as a stationary phase for capillary electrochromatography.