Candle Soot Research Articles

Dual-action defense: A photothermal and controlled nitric oxide-releasing coating for preventing biofilm formation

Biofilms formed by pathogenic bacteria on biomedical devices and implants pose a considerable challenge due to their resistance to conventional treatments and their role in severe infections. Preventing biofilm formation is strategically more advantageous than attempting to eliminate the mature biofilms, particularly in addressing the persistence of such formations. In this context, a dual-action antibiofilm coating is developed, utilizing S-nitrosothiols functionalized candle soot (CS), which capitalizes on CS’s strong light absorption for photothermal therapy and the controlled release of nitric oxide (NO) from S-nitrosothiols to inhibit biofilm formation. This coating exhibits stable and efficient light-to-heat conversion, along with the ability to release NO gradually at physiological temperatures and to rapidly release NO on demand when triggered by a near-infrared (NIR) laser. Under NIR irradition, the coating generates heat swiftly and releases substantial amounts of NO, which synergistically disrupts bacterial membranes, leading to the leakage of intracellular components and the effective eradication of surface-adhered bacteria. In the absence of NIR irradiation, the coating continuously releases low concentrations of NO, which depletes exopolysaccharides and impedes biofilm formation. The antibiofilm efficacy of this coating is assessed against Staphylococcus aureus and Pseudomonas aeruginosa, demonstrating marked reductions in bacterial viability and biofilm formation in vitro. Additionally, the coating exhibits minimal cytotoxicity and can be easily applied to diverse substrates. This study underscores the potential of this coating as a broad-spectrum, non-toxic approach for preventing biofilm-related complications in biomedical applications.

Easily Applicable Superhydrophobic Composite Coating with Improved Corrosion Resistance and Delayed Icing Properties

Mitigating the adverse effects of corrosion failure and low-temperature icing on aluminum (Al) alloy materials poses significant research challenges. The facile fabrication of bioinspired superhydrophobic materials offers a promising solution to the issues of corrosion and icing. In this study, we utilized laboratory-collected candle soot (CS), hydrophobic fumed SiO2, and epoxy resin (EP) to create a HF-SiO2@CS@EP superhydrophobic coating on Al alloy surfaces using a spray-coating technique. Various characterization techniques, including contact angle meter, high-speed camera, FE-SEM, EDS, FTIR, and XPS, were employed to investigate surface wettability, morphologies, and chemical compositions. Moreover, a 3.5 wt.% NaCl solution was used as a corrosive medium to evaluate the corrosion resistance of the uncoated and coated samples. The results show that the capacitive arc radius, charge transfer resistance, and low-frequency modulus of the coated Al alloy significantly increased, while the corrosion potential (Ecorr) shifted positively and the corrosion current (Icorr) decreased by two orders of magnitude, indicating improved corrosion resistance. Additionally, an investigation of ice formation on the coated Al alloy at −10 °C revealed that the freezing time was 4.75 times longer and the ice adhesion strength was one-fifth of the uncoated Al alloy substrate, demonstrating superior delayed icing and reduced ice adhesion strength performance.

Candle soot-modified rPET electrospun nanofibrous membrane for separating on-demand oil-water mixture and emulsions

The CS-rPET electrospun nanofibrous membrane is fabricated from recycled polyethylene terephthalate (rPET) through electrospinning and enhanced with candle soot (CS) to separate oil-water mixtures and emulsions when pre-wetted by oil or water. Using rPET polymers and CS waste reduces the environmental impact of plastic bottle waste and improves its value. The CS-rPET electrospun nanofibrous membrane showed excellent separation performance in oil-water mixtures, achieving over 81.18 % and 71.38 % of separation efficiency through 40 separation cycles after pre-wetting by oil and after washing with ethanol and pre-wetting by water, respectively. The membrane maintained high separation performance after being pre-wetted by oil for water-in-oil emulsions with efficiencies above 99 % and flux exceeding 12,200 L m−2 h−1. Similarly, the efficiencies remained above 98 % for oil-in-water emulsions after being pre-wetted by water, with a flux over 8000 L m−2 h−1. Additionally, the CS-rPET electrospun nanofibrous membrane exhibited high separation efficiencies above 97 % and flux over 14,000 L m−2 h−1 after pre-wetting by oil and 7700 L m−2 h−1 after pre-wetting by water in harsh environmental conditions. Its adaptability of switchable wettability on-demand after pre-wetting by oil or water highlights its potential for a wide range of challenging oil-water separation applications. However, multiple separation cycles, separation efficiency and flux were reduced, indicating the necessity to improve the membrane's efficiency and reduce the chance of water accumulation in multicycle separation.

Assessing the Degradation Status of the Imperial Doors of the Ascension Church, Grindu Commune, Romania

To asses the degradation status of the Imperial Doors of the early 19th century Ascension Church iconostasis, a complex study consisting of micro-optical and scanning electron microscopy followed by energy-dispersive X-ray fluorescence and Fourier transform infrared spectroscopy was performed. Accordingly, the entire left door and some small fragments of gilded wood were investigated. The final results evidenced a certain degree of degradation of the lime wood and gilded surfaces, mainly due to the bacterial and fungi attacks given the increased humidity and the presence of more than a century of candle soot. Also, some unsuccessful restorations performed using brass paint instead of gold foils were evidenced. Overall, this study permitted elaborating more appropriate procedures for the iconostasis’ full restoration to its initial form, given that the Ascension Church is classified as a historical objective of national and universal value.

Preliminary Electrochemical Analysis of Carbon Nanoparticles from Candle Soot

Nanoparticles (NPs) generated by candle soot are of interest due to their potential applications. Because of their electronic properties, carbon-based zero-dimensional, one-dimensional, and two-dimensional nanomaterials such as graphene, fullerene, carbon nanotubes, and carbon nanofibers are extensively studied (1).However, synthesis of these nanomaterials is complex and expensive. Candle soot also contains fluorescent carbon NPswhich can be used for the preparation of fluorescent makers (2). The potential applications of candle soot NPs include energy storage [e.g., can be used for supercapacitor electrode material (3)], and conversion [fuel cells (4)]. Candle soot can be an excellent source of carbon NPs. In this presentation, we cover some challenges associated with carbon NPs, such as (a) instability of NPs due to agglomeration with time and increase in temperature and (b) separation and isolation of NPs. Thus, we focus on stabilization of NPs, isolation and characterization of NPs and to study electronic, optical, and electrochemical properties to determine whether they are promising candidate in the field of energy conversion.Candle soot formation depends on various parameters like substrate material, deposition time, flame temperature, wick dimension, and flame height (5). We developed a protocol for the collection of candle soot. With this proposed protocol, the carbon NPs generated from candle soot ranges from 50 nm to larger particle size which is confirmed by dynamic light scattering (DLS) technique shown in Fig. 1, and transmission electron microscope (TEM). We will include the electrochemical analysis such as investigation of oxidation/reduction processes to determine fundamental thermodynamic parameters of standard potential in organic solvents and aqueous solutions. References Jariwala, V.K. Sangwan, L.J. Lauhan, T.J. Marks, M.C. Harsam, Carbon nanomaterials for electronics, optoelectronics, photovoltaics, and sensing, Chem. Soc. Rev., 43 (2013), 2824-28.J. Campbell, M.J. Andrews, K.J. Stevenson, New nanotech from an ancient material: Chemistry demonstrations involving carbon-based soot, J. Chem. Educ., 89 (2012) 1280-1287.Zhang, D. Wang, B. Yu, F. Zhou, W. Liu, Candle soot as a supercapacitor electrode material, RSC. Adv., 4 (2014), 2586-2589.Khalakhan, R. Fiala, J. Laukova, P. Kus, A. Ostroverkh, M. Vaclavu, M. Vorokhta, I. Matolinova, V. Matolin., Candle Soot as an efficient support for proton exchange membrane fuel cell catalyst, Fuel Cell., 16 (2016) 652-655.N. Sahoo, B. kandasubramanian. An experimental design for the investigation of water repellent property of candle soot particles, Mater. Chem. Phys.,148 (2014), 134-142. Figure 1

Anisotropic Superhydrophobic Properties Replicated from Leek Leaves.

A bio-inspired approach to fabricate robust superhydrophobic (SHB) surfaces with anisotropic properties replicated from a leek leaf is presented. The polydimethylsiloxane (PDMS) replica surfaces exhibit anisotropic wetting, anti-icing, and light scattering properties due to microgrooves replicated from leek leaves. Superhydrophobicity is achieved by a novel modified candle soot (CS) coating that mimics leek's epicuticular wax. The resulting surfaces show a contact angle (CA) difference of ≈30° in the directions perpendicular and parallel to the grooves, which is similar to the anisotropic properties of the original leek leaf. The coated replica is durable, withstanding cyclic bending tests (up to 10 000 cycles) and mechanical sand abrasion (up to 60g of sand). The coated replica shows low ice adhesion (10kPa) after the first cycle; and then, increases to ≈70kPa after ten icing-shearing cycles; while, anisotropy in ice adhesion becomes more evident with more cycles. In addition, the candle soot-coated positive replica (CS-coated PR) demonstrates a transmittance of ≈73% and a haze of ≈65% at the wavelength of 550nm. The results show that the properties depend on the replicated surface features of the leek leaf, which means that the leek leaf appears to be a highly useful template for bioinspired surfaces.

Enhanced Performance of Laser-Induced Graphene Supercapacitors via Integration with Candle-Soot Nanoparticles.

Laser-induced graphene (LIG) has been emerging as a promising electrode material for supercapacitors due to its cost-effective and straightforward fabrication approach. However, LIG-based supercapacitors still face challenges with limited capacitance and stability. To overcome these limitations, in this work, we present a novel, cost-effective, and facile fabrication approach by integrating LIG materials with candle-soot nanoparticles. The composite electrode is fabricated by laser irradiation on a Kapton sheet to generate LIG material, followed by spray-coating with candle-soot nanoparticles and annealing. Materials characterization reveals that the annealing process enables a robust connection between the nanoparticles and the LIG materials and enhances nanoparticle graphitization. The prepared supercapacitor yields a maximum specific capacitance of 15.1 mF/cm2 at 0.1 mA/cm2, with a maximum energy density of 2.1 μWh/cm2 and a power density of 50 μW/cm2. Notably, the synergistic activity of candle soot and LIG surpasses the performances of previously reported LIG-based supercapacitors. Furthermore, the cyclic stability of the device demonstrates excellent capacitance retention of 80% and Coulombic efficiency of 100% over 10000 cycles.

Application of High-Surface Tension and Hygroscopic Ionic Liquid-Infused Nanostructured SiO2 Surfaces for Reversible/Repeatable Anti-Fogging Treatment

Anti-fogging coatings/surfaces have attracted much attention lately because of their practical applications in a wide variety of engineering fields. In this study, we successfully developed transparent anti-fogging surfaces using a non-volatile and hygroscopic ionic liquid (IL), bis(hydroxyethyl)dimethylammonium methanesulfonate ([BHEDMA][MeSO3]), with a high surface tension (HST, 66.4 mN/m). To prepare these surfaces, a layer of highly transparent, superhydrophilic silica (SiO2) nano-frameworks (SNFs) was first prepared on a glass slide using candle soot particles and the subsequent chemisorption of tetraethoxysilane (TEOS). This particulate layer of SNFs was then used as the support for the preparation of the [BHEDMA][MeSO3] layer. The resulting IL-infused SNF-covered glass slide was highly transparent, superhydrophilic, hygroscopic, and had self-healing and reasonable reversible/repeatable anti-fogging/frosting properties. This IL-infused sample surface kept its excellent anti-fogging performance in air for more than 8 weeks due to the IL’s non-volatile, HST, and hygroscopic nature. In addition, even if the water absorption limit of [BHEDMA][MeSO3] was reached, the anti-fogging properties could be fully restored reversibly/repeatably by simply leaving the samples in air for several tens of minutes or heating them at 100 °C for a few minutes to remove the absorbed water. Our IL-based anti-fogging surfaces showed substantial improvement in their abilities to prevent fogging when compared to other dry/wet (super)hydrophobic/(super)hydrophilic surfaces having different surface geometries and chemistries.

Candle Soot as a Novel Support for Nickel Nanoparticles in the Electrocatalytic Ethanol Oxidation.

The enhancement of carbon-supported components is a crucial factor in augmenting the interplay between carbon-supported and metal-active components in the utilization of catalysts for direct ethanol fuel cells (DEFCs). Here, we propose a strategy for designing a catalyst by modifying candle soot (CS) and loading nickel onto ordered carbon soot. The present study aimed to investigate the effect of the Ni nanoparticles content on the electrocatalytic performance of Ni-CS, ultimately leading to the identification of a maximum composition. The presence of an excessive quantity of nickel particles leads to a decrease in the number of active sites within the material, resulting in sluggishness of the electron transfer pathway. The electrocatalyst composed of nickel and carbon support, with a nickel content of 20 wt%, has demonstrated a noteworthy current activity of 18.43 mA/cm2, which is three times that of the electrocatalyst with a higher nickel content of 25 wt%. For example, the 20 wt% Ni-CS electrocatalytic activity was found to be good, and it was approximately four times higher than that of 20 wt% Ni-CB (nickel-carbon black). Moreover, the chronoamperometry (CA) test demonstrated a reduction in current activity of merely 65.80% for a 20 wt% Ni-CS electrocatalyst, indicating electrochemical stability. In addition, this demonstrates the great potential of candle soot with Ni nanoparticles to be used as a catalyst in practical applications.

Interfacial Zn ion capture and desolvation engineering for high-performance Zn metal anode

The uneven surface of planar zinc (Zn) metal anodes fundamentally reduces the electrochemical reversibility of aqueous Zn metal batteries due to dendritic growth. Herein, an interphase protection layer engineering is formed on the surface of the Zn metal anode through a solution-processed coating method. This interesting carbon layer, composed of carbon nanoparticles obtained from outer flame-derived candle soot (OFCS), exhibits excellent Zn ion capturing and storage capabilities, effectively reducing the accumulation of charge density on the Zn metal surface, providing a homogeneous Zn ion flux and inducing even Zn metal deposition. The OFCS@Zn can promote the desolvation of [Zn(H2O)6]2+ through strong interaction with Zn ions, mitigating corrosion and hydrogen evolution reactions. The multifunctional integration of the OFCS layer synergistically induces uniform Zn metal plating and inhibits side reactions. Consequently, in the OFCS @Zn | OFCS @Zn symmetric-cell tests, high-rate performance and deep charge/discharge capabilities are demonstrated. The OFCS@Zn anode-based pouch cell exhibits a high discharge capacity of 156.2 mAh g-1 and maintains a significant capacity retention rate of 95.4 % for 200 cycles at the current density of 1 A g-1, indicating its potential for enhanced battery stability and efficiency.

Investigation of friction and vibration performance of lithium complex grease containing candle soot on aviation electrical machine

The prolonged operation of the motor in the all-electric aircraft can cause the fragmentation and shortening of grease thickener fibers, ultimately resulting in the lubricating grease becoming ineffective. In order to avoid grease failure causing motor winding burnout, this paper uses a four-ball friction testing machine to test the tribological properties of six composite greases containing candle soot with different concentrations, and analyzes the changes in friction coefficient and wear diameter. In addition, by building a test platform for motor vibration and noise, this paper studies the influence of lithium complex grease on vibration and noise characteristics of aviation electrical machine at different propeller speeds. The results show that the addition of 0.04 wt% candle soot lithium grease has the best tribological properties and vibration inhibition properties, because the candle soot in the oil film changes the sliding friction into rolling friction in the contact area of some friction pair. The temperature rise test of aviation electrical machine shows that the lithium complex grease plays an active role in the heat dissipation performance of the high-speed rotating motor.

A Strategy of Candle Soot-Based Photothermal Icephobic Superhydrophobic Surface

Anti-icing/de-icing is of fundamental importance in practical applications such as power transmission, wind turbines, and aerofoils. Despite recent efforts in developing engineering surfaces to delay ice accumulation or reduce ice adhesion, it remains challenging to design robust photothermal icephobic surfaces in a durable, low-cost, easy-fabrication manner. Here, we report an intelligent candle soot-based photothermal surface (PDMS/CS60@PDMS/Al) that can utilize sunlight illumination to achieve the multi-abilities of anti-icing, de-icing, and self-cleaning. Our method lies in the construction of hierarchical micro/nanostructures by depositing photothermal candle soot nanoparticles, which endow the surface with superior superhydrophobicity and excellent photothermal performance. The underlying mechanism is exploited by establishing the heat transfer model between the droplets and the cooled surface. We believe that the smart PDMS/CS60@PDMS/Al developed in this work could provide a feasible strategy to design intelligent engineering surfaces for enhanced anti-icing/de-icing.

Fabrication of mechanical durable novolac matrix composites with recycled and cost-effective candle-soot nano particles

Novolac matrix composites are crucial due to their exceptional resistance to heat, chemicals, and mechanical stress. These advanced materials find applications in aerospace, electronics, and automotive industries, providing high-performance solutions for components requiring superior durability and reliability. In this context, the microstructure, thermal, phase, and mechanical properties of the composites obtained as a result of the recycling-oriented reinforcement of the waste candle-soot (CS) reinforcement at the rate of 1 wt% to the pure novolac (PN) and shaping with the hot press method were examined in detail at first time in the literature. While microstructural properties and fracture mechanisms were investigated by scanning electron microscopy (SEM), thermal properties were investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results obtained provided critical findings as the composite hardness, tensile strength, and flexural strength values were 3.28, 2.47, and 3.21 times higher than PN, respectively. CS-reinforced novolac composites made a significant contribution to the literature by introducing a novel and eco-friendly approach to enhance material properties. Their use as a filler material provided insights into sustainable novolac composites, offering potential applications in various industries, such as electronics and aerospace, with improved mechanical and thermal properties.

A Route towards Durable Underwater Stable Superhydrophobic Surfaces: PET-Reinforced Candle Soot Layers

Superhydrophobic coating is widely used due to its waterproof and self-cleaning properties. Carbon soot (CS) nanoparticles are naturally superhydrophobic and non-toxic which are superior to other superhydrophobic coating. However, the weak binding force of the CS nanoparticle layers hinders their practical application. In this study, micro-nanostructured PET-CS superhydrophobic coatings were prepared by a simple method. The obtained coatings presented durable superhydrophobicity and underwater stability, which are superior to PDMS-CS coatings and CS layers. The coating surfaces demonstrated superhydrophobicity under a water pressure of 13.72 kPa for up to 16 days. The surface could withstand water flush for more than 15 min. The coatings also demonstrated good mechanical stability and maintained superhydrophobicity after an abrasion length of 8 m. The stable long-lasting underwater superhydrophobic surface is of great importance for marine applications.

A conical shaped self-healing slippery film for enhanced fog harvesting in windy environment

Wind presents both advantages and disadvantages for water collection. It can bring an abundant fog resource to arid areas for water harvesting, however, some of the captured water droplets are inevitably blown away in a windy environment because of the easy-sliding property of the material surface. Herein, a conical-shaped, self-healing, liquid-infused film with tunable cone angles based on candle soot, thermoplastic poly (ethylene-co-vinyl acetate) (EVA), and hydrophobic silicone oil has been developed using a simple template method and traditional Chinese origami. Benefiting from the inward force induced by the conical structure, the condensed droplets prefer to gather toward the top of the conical structure in windy environments rather than splashing out, which usually occurs on a plane surface. This advantage can greatly ensure the high water collection efficiency of materials in windy regions. In addition, owing to the unique photothermal property and thermoplasticity of the designed conical structure, surface scratches during application can be quickly repaired under solar illumination without extra fossil energy consumption, and long-term stable application of the materials can be guaranteed. Therefore, this study finely synergized structure design and performance enhancement and established a new paradigm for effective and reliable fog harvesting applications.

Multipoint Energy-Balanced Laser-Ultrasonic Transducer Based on a Thin-Cladding Fiber.

This study proposes a novel multipoint transducer system by utilizing the single-mode-multimode-thin-cladding fiber (SMTC) structure. This structure leverages the disparity in mode field diameter between the multimode fiber (MMF) and thin-cladding fiber (TCF) to generate high-amplitude ultrasonic signals safely and efficiently. The fabricated transducer exhibits signal amplitudes 2-3-fold higher compared to conventional laser-ultrasonic transducers. Simulation analysis investigates the impact of the length of the MMF and the diameter of the TCF on coupling efficiency. The coupling efficiency of individual transducer units can be accurately controlled by adjusting the length of the MMF. A three-point energy-balanced laser-ultrasonic transducer system was achieved, with improved energy conversion efficiencies, and the optimal thickness of candle soot nanoparticles (CSNPs) is experimentally determined. Additionally, we carried out experiments to compare the performance of the proposed SMTC-based transducer system under different material conditions using two different photoacoustic materials: graphite-epoxy resin and candle soot nanoparticle-polydimethylsiloxane (CSNP-PDMS) composite. CSNPs, as a cost-effective and easy-to-prepare composite material, exhibit higher photoacoustic conversion efficiency compared to graphite-epoxy resin. The proposed system demonstrates the potential for applications in non-destructive testing techniques.

An easy preparation of carbon nanoparticle-coated hydrophobic substrates for highly efficient oil/water separation

Hydrophobic cotton fabrics and sponges were fabricated using a simple hydrothermal method in a mixed solution of carbon nanoparticles (CNPs) generated from candle soot and n-octadecyltrimethoxysilane, within which a cotton fabric was immersed. The negatively charged CNPs firmly bonded to the positively charged surface of the fabric and sponge through electrostatic interactions, resulting in the formation of a chemically durable hydrophobic filter. The separation efficiencies of the hydrophobic fabric and sponge were high for different types of oil, including hexane, iso-octane, chloroform, and canola oil, which had different viscosities and densities. The CNP-coated fabric showed outstanding recycling ability and chemical durability in corrosive chemical environments such as in highly acidic, alkaline, saline, and hot solutions. Moreover, the CNP-coated sponge showed strong absorption of a diverse range of oils, up to 64.1 times the weight of the sponge. The proposed synthesis method shows considerable technical potential for the application of CNP-based hydrophobic coating technology in various methods used for the separation of oily waste.

Fabrication of a superhydrophobic surface with photothermal electrical conversion performance for anti-icing

The development of anti-icing technology is an effective way to decrease the harm caused by ice accumulation on the surface of materials. In this work, the polypropylene with candle soot and micro-nano structures on its surface (the PP/CS replica) is prepared using a template method. The micro-nano structures are formed on the PP/CS replica surface after hot-pressing. The surface water contact angle of the PP/CS replica is up to 163° and the rolling angle is as low as 2°. The PP/CS replica still has superhydrophobic performance after water flow impact, friction and immersion. The freezing time of the water droplet is delayed and the ice adhesion strength is reduced on the PP/CS replica surface, owing to the micro-nano structures. The PP/CS replica surface has excellent photothermal performance, and the surface temperature can reach 89 °C under simulated sunlight illumination, which accelerates the melting of ice. The photothermal electrical conversion is achieved by the combination of the PP/CS replica and the thermoelectric generator, with an output power up to 604 mW. The solar energy can be effectively utilized.

Candle soot colloids enhance tomato (Solanum lycopersicum) seed germination and seedling quality

The effect of candle soot colloids, a novel nanomaterial from candle combustion that we developed previously, on tomato (Solanum lycopersicum) seed germination and seedling vigor was investigated. Candle soot colloids were applied at different concentrations and hydrophobicities to tomato seeds and germination parameters and seedling vigor characteristics, such as length, fresh weight, dry weight, chlorophyll, and carotenoids, were measured. It was found that candle soot colloids significantly improved germination speed, seedling length, and seedling fresh weight compared to the control. The adherence of soot particles to the trichomes on the seed surface, which may help seeds retain moisture and stay hydrated, was observed. The chemical composition of the soot samples was analyzed using gas chromatography-time of flight mass spectrometry and two different chemical constituents in hydrophilic and hydrophobic soot samples that may affect seed germination were identified. A new potential use of candle soot colloids as plant growth-promoting agents and insights into the effects of nanomaterials on plant physiology and biochemistry were revealed by this study.

Candle soot carbon-Co3O4 nanofibers composite as a binder-free electrode for high-performance supercapacitor application: An experimental and theoretical investigation

Extensive research has been conducted on nanostructured metal oxide electrodes for energy storage applications, particularly in supercapacitors, owing to their high specific capacitance. However, a major hindrance to their commercialization is their limited life cycles. To address this issue, incorporating carbon allotropes as a conductive support to enhance the electrode's stability has been explored. In the current work, a novel composite material was synthesized by combining candle soot carbon with cobalt oxide (Co3O4) to create a highly efficient electrode. The optimal composite, with a 2 wt% of candle soot carbon to Co3O4, exhibited utmost specific capacitance (997.5 Fg−1) at 1 Ag−1. After subjecting both electrodes to 10,000 cycles of repetitive charge and discharge, the composite demonstrated a capacitance retention of 83.3 %, while the Co3O4 electrode only achieved 75 % under identical conditions. Additionally, Density Functional Theory (DFT) investigations were performed to elucidate the improved charge-storing capacities of the composite electrode. The computed density of states indicates enrichment of energy states near the Fermi level in the composite when seen to pristine Co3O4. The Partial Density of States (PDOS) analysis illustrates the transportation of charge from the carbon p orbital (candle soot carbon) to the Co d orbital (Co3O4), validating the conductivity improvement in the hybrid configuration, which benefits from enhanced charge storage performance. Overall, the composite material is promising for hybrid supercapacitors, especially due to the incorporation of candle soot carbon as one of its components. It not only enhances the performance of the supercapacitor but also offers the advantage of being a renewable material derived from waste materials. This combination makes the composite an appealing and sustainable choice for next-generation energy storage devices.