Canal Surface Research Articles

A Computerized Tomography-Based Analysis of Spinal Canal Diameter to Study Its Implication on Cervical Spine Stenosis in Western Indian Population: A Retrospective Study

Abstract Background The cervical spine is prone to various conditions necessitating early detection. Morphometric analysis through computed tomography (CT) scans plays a pivotal role in diagnosing and preventing severe diseases. This study focuses on understanding the morphometric details of the cervical canal in the West Indian population, addressing a geographical gap in existing literature. The primary objective of this study was to perform a morphometric analysis of the cervical spine to study the implications it can have on cervical canal stenosis in the West Indian population. Materials and Methods This study utilizes imaging data from the CT database of 100 individuals (73 men and 27 women). Measurements such as transverse canal diameter, sagittal canal diameter, cross-sectional canal surface area (CSA), and vertebral body diameter (VBD) were collected and the Pavlov-Torg ratio (PTR) was calculated from C2 to C7. Results Notable findings include significant differences in CSA and VBD between genders, while PTR indicated cervical damage in 40% of participants. Multinomial regression was applied which signified an association between weakness and PTR. Conclusion This study can be used to highlight the CT scan's importance in studying bony structures and the call for more region-specific morphometric studies. The variations in morphometric parameters could provide insights into understanding the vulnerabilities of a population belonging to a particular geographic area, in our case, the West Indian population.

Comparative Evaluation of Three Access Cavity Preparation Techniques on Root Canal Instrumentation Using Micro-CT: An In Vitro Study.

Background Access cavity preparation is a crucial step in nonsurgical root canal treatment. Recent advancements in access cavity designs focus on preserving maximum tooth structure while ensuring sufficient access to canal orifices for effective cleaning and shaping, resulting in minimally invasive procedures. However, there is limited information on the impact of three-dimensional (3D)-guided access cavity preparation in molars. A literature review found no prior studies comparing the effects of various access cavity preparation techniques on apical transportation, untouched surfaces, and debris formation within the canal. Objective The objective of this study is to compare and evaluate the effects of three different access cavity techniques on apical transportation, untouched surfaces, and debris formation within the root canal. Material and methods Thirty extracted permanent mandibular first molars were selected and randomly assigned to three groups for this study: Group I received 3D-printed static guided cavity preparation, Group II underwent conservative access cavity preparation, and Group III was subjected to traditional access cavity (TAC) preparation. The mesial canals in all samples were cleaned and shaped using TruNatomy files. Preoperative and postoperative micro-CT imaging was performed on each sample to assess the effects of the different access cavity preparation techniques on apical transportation, untouched surfaces, and debris formation within the root canal. Results The study found that Group I, which used 3D-printed static guided cavity preparation, exhibited significantly less apical transportation compared to Groups II and III, with mean differences of -0.1677 and -0.2079, respectively. Debris accumulation was similar across all groups, with mean values of 0.928 ± 0.824 for Group I, 0.751 ± 0.495 for Group II, and 0.938 ± 0.681 for Group III, indicating no significant impact of cavity preparation type on debris levels. For untouched canal surfaces, Group III (TAC preparation) had the fewest untouched surfaces, with mean differences of 3.0380 and 3.9020 compared to Groups II and I, respectively. Conclusions While TAC preparation reduces substantial tooth structure, it shows higher instrumentation efficacy and better cleaning of the root canal system. However, in complex cases where tooth structure preservation is crucial, guided access cavity preparation provides an effective balance between structural conservation and adequate canal access. This approach offers a tailored solution, optimizing treatment outcomes based on the specific clinical scenario.

Influence of sustained mild dehydration on thermoregulatory and cognitive functions during prolonged moderate exercise

PurposeThe current study investigated whether sustained mild dehydration affects thermoregulatory function and cognitive performance during prolonged exercise.MethodsTwelve young adults performed a test consisting of three sets of 20-min exercise with 2-min intervals under euhydrated (control, CON) and mildly dehydrated conditions (MDEH) at an ambient temperature of 30 °C and 60% relative humidity. MDEH was established by restricting water intake for 24 h, resulting in urine specific gravity of ≥ 1.020. Heart rate (HR), mean arterial blood pressure (MAP), skin blood flow (SkBF), sweat rate (SR) on the chest and forearm, and ear canal and mean skin surface temperatures (Tear and mean Tskin, respectively) were continuously recorded. For each exercise set, thermal and humid sensations and thermal discomfort were assessed using visual analog scales (VAS), and the rating of perceived exertion (RPE) was estimated. Cognitive performance on the Go/No-Go (easy) and incongruent Stroop (difficult) tasks was assessed before and after the test.ResultsNo differences were observed in HR, MAP, SkBF, SR, Tear, and mean Tskin between the CON and MDEH. Thermal and humidity sensations, thermal discomfort, and RPE were higher in MDEH than in CON. Moreover, response time to the Stroop task was prolonged in MDEH.ConclusionThese findings suggest that sustained mild dehydration does not affect autonomic thermoregulation during exercise. Augmented thermal perception and perceived exertion, which are necessary for behavioral thermoregulation, were noted; however, cognitive function may be attenuated under MDEH.

Exploring access cavity through non-carious cervical lesions: Impacts on instrumentation, obturation, and fracture resistance in mandibular incisors.

To compare the effects of Cervical Access Cavity (CervAC) and Traditional Access Cavity (TradAC) on root canal preparation, root canal filling, and fracture resistance in mandibular incisors. Twenty recently extracted and intact mandibular incisors were initially scanned using a micro-CT device. The specimens were anatomically matched to create two groups (n = 10). A wedge-shaped non-carious cervical lesion (NCCL) was created on the buccal aspect of all teeth using a double-faced segmented diamond disc. In group 1, a TradAC was prepared, whilst in group 2, access was created through the simulated NCCL using a round diamond bur 1012. After root canal preparation with Rotate instruments sizes 15/0.04, 20/0.04, and 25/0.04, the teeth were scanned again and evaluated for root canal volume and surface area, static voxels, volume of removed dental tissue, and dentine thickness. After that, the root canals were filled using the single-cone technique, teeth were restored with composite resin, and subsequently rescanned to calculate the volume of filling materials and voids. Then, the restored teeth were subjected to fracture resistance tests using a universal testing machine. Statistical comparisons between groups were performed with the Mann-Whitney test or the Student's t-test, with a statistical significance level of 5%. Statistical comparisons indicated no significant differences between groups in terms of root canal volume, surface area, static voxels, removed root dentine, root canal filling volume, percentage of voids, or fracture resistance load (p > .05). Conversely, teeth prepared with TradAC showed a significantly higher percentage of dental tissue removed from the crown (p = .001) and a greater volume of filling material remnants in the pulp chamber (p < .001) compared to the CervAC group. A significantly lower percentage reduction in dentine thickness was observed only on the mesial aspect of root at Level 1 in TradAC group (p = .008). CervAC can be considered a viable alternative approach in the presence of NCCL in mandibular incisors.

Evaluation of Volumetric Changes between Pediatric Rotary Files and Manual Files during Canal Preparation of Primary Mandibular Canine: A Nano-CT Analysis

Abstract Objective Pediatric endodontics has become popular due to advancements in cleaning, shaping, and irrigation systems, resulting in faster and effective removal of infected pulp, saving time, and creating a pathogen-free environment. The patented rotary file system, Kedo S, designed for primary teeth, introduced a single file generation for efficient pulp therapy. However, there are currently no studies assessing canal preparation in primary mandibular canine using nano-computed tomography (nano-CT). This study aims to evaluate the efficacy of rotary file systems (Kedo S plus, Kedo SG blue) against traditional hand files in root canal preparation of primary mandibular canines using nano-CT. Materials and Methods This in vitro study was performed in extracted primary mandibular canine based on certain inclusion and exclusion criteria. Samples were prepared and working length was determined before the preoperative scan using a high-resolution nano-CT device (SkyScan 2214, Bruker, Kontich, Belgium). A single well-experienced pediatric dentist prepared the canals using three file systems: Kedo S plus, Kedo SG blue, and hand K-files. A postoperative scan was performed similar to preoperative scan. Image reconstruction was performed with NRecon software for three-dimensional volumetric visualization and analysis of the root canals. Results Kedo S plus displayed significant alterations in volumetric, surface area, and instrumented areas postpreparation compared with Kedo SG blue and hand files. Statistical analysis revealed significant differences in volumetric and surface changes between Kedo S plus and hand files. Conclusion Rotary file systems, especially Kedo S plus, resulted in increased canal volume and surface area with minimal uninstrumented areas, showing promise for primary dentition root canal preparations. Further clinical assessments are warranted to validate these findings.

Multimethod Analysis of a Novel Multi-coloured Heat-treated Nickel-Titanium Rotary System: Design, Metallurgy, Mechanical Properties, and Shaping Ability

IntroductionThis study aimed to compare a new multicolored rotary system with four heat-treated rotary instruments using the multimethod approach. MethodsThree-hundred instruments of RCS Rainbow, Rotate, RaCe EVO, OneCurve, and ProTaper Ultimate systems were evaluated regarding their design (stereomicroscopy, scanning electron microscopy, and 3D surface scanning), metallurgy, and mechanical performance (cyclic fatigue, torsional resistance, bending and buckling resistance, and cutting ability). Unprepared surfaces after canal preparation of maxillary molars were evaluated using micro-computed tomography. Kruskal-Wallis and one-way analysis of variance post hoc Tukey tests were used for statistical comparisons (α = 5%). ResultsInstruments exhibited variations in active blade length, number of spirals, and cross-sectional designs. RCS Rainbow showed specific phase transformation temperatures, highest bending (400.5gf) and buckling (286gf) resistance values, and lowest mean angle of rotation (529°) (P < .05). OneCurve exhibited superior cutting ability (8.4 mm) and longer time to fracture (112s). RaCe EVO displayed the lowest time to fracture (51s), maximum torque (1.2 N.cm), buckling (174gf), and bending resistance (261gf) values (P < .05). ProTaper Ultimate showed the highest torque (1.6 N.cm) and angle of rotation (611°) (P < .05), while its bending load (262gf) was comparable to RaCe EVO (P > .05). Rotate instrument showed intermediate values in the mechanical tests. No difference was observed regarding the unprepared canal surfaces (P > .05) ConclusionsRCS Rainbow demonstrates a trade-off between flexibility and other mechanical properties. Its dimensions exceeded those of other instruments, affording it higher torque resistance, yet concurrently reducing its flexibility, angle of rotation, and cutting ability. OneCurve stands out as a well-balanced choice by integrating geometric design and mechanical performance.

Tiny-Machine-Learning-Based Supply Canal Surface Condition Monitoring.

The South-to-North Water Diversion Project in China is an extensive inter-basin water transfer project, for which ensuring the safe operation and maintenance of infrastructure poses a fundamental challenge. In this context, structural health monitoring is crucial for the safe and efficient operation of hydraulic infrastructure. Currently, most health monitoring systems for hydraulic infrastructure rely on commercial software or algorithms that only run on desktop computers. This study developed for the first time a lightweight convolutional neural network (CNN) model specifically for early detection of structural damage in water supply canals and deployed it as a tiny machine learning (TinyML) application on a low-power microcontroller unit (MCU). The model uses damage images of the supply canals that we collected as input and the damage types as output. With data augmentation techniques to enhance the training dataset, the deployed model is only 7.57 KB in size and demonstrates an accuracy of 94.17 ± 1.67% and a precision of 94.47 ± 1.46%, outperforming other commonly used CNN models in terms of performance and energy efficiency. Moreover, each inference consumes only 5610.18 μJ of energy, allowing a standard 225 mAh button cell to run continuously for nearly 11 years and perform approximately 4,945,055 inferences. This research not only confirms the feasibility of deploying real-time supply canal surface condition monitoring on low-power, resource-constrained devices but also provides practical technical solutions for improving infrastructure security.

Effect of Cross-Sectional Designs of Different Ni-Ti Files on Shaping Ability After Repeated Usage in Simulated Root Canals.

Background and Objective: The study aimed was to compare the effect of cross-sectional designs of five rotary systems (One Curve, 2Shape, K3-i File, E3 Azure, Neolix), on the shaping ability of the files in simulated resin blocks under controlled conditions with five repeated use. The shaping ability of the files includes the following variables: (1) Longitudinal sectional area difference, (2) Canal wall surface area difference, (3) Canal volume difference, (4) SMI (structure material index) difference, (5) Cross-sectional area difference. Methods: Five rotary file systems: (1) One Curve, (2) 2Shape, (3) K3-i File, (4) E3 Azure, (5) Neolix, were tested in simulated J-shaped root canal resin blocks with a 45˚ angle of curvature. 10 files from each system, each one of the 10 files were used to prepare 5 resin blocks, named R1-R2-R3-R4-R5. All the used files from the 5 systems had tip size 25 diameter, and taper (6%), and length (25 mm). The first 4 rotary systems were used with a fixed speed (350 rpm), and fixed torque (3 Ncm), except for the fifth system which was used with a speed of (500 rpm), and torque (4 Ncm), Following the manufactural recommendation of each system. All the 250 resin blocks were prepared for Glide Path with manual reamers size 10, and 15, with a fixed working length 16 mm, then all the 250 samples were prepared with a Proglider rotary file from Dentsply (size 16 taper 3%), then finally were prepared with Edge Files (USA), with size 20 and taper 6%, reaching to the step of master preparation with the selected files of the 5 systems. Using a customized device for preparation to ensure fixed vertical force and to exclude any lateral force, preparation was done with EDTA solution as irrigation, with a fixed no. of 4 strokes for the first 5 systems and 9 strokes for the Neolix, the time was controlled by using a Metronome, each stroke duration was 6 seconds. Results: In the first, second, third, and fourth variables a statistically non-significant difference (P &gt; 0.05) was found between One curve and 2Shape, a statistically significant difference (P &lt; 0.05) was found between One Curve, K3-i File, E3 Azure, and Neolix. About the fifth variable which is the Cross-sectional area difference: the study compared the difference between the cross-section area of the canal at the point D8, comparing the cross-section area before and after preparation using ANOVA test and Post hoc test, a statistically significant difference (P &lt; 0.05) was found between the Neolix and (2shape, K3 i-File, and E3 Azure). Conclusion: The cross-sectional design of the endodontic rotary instrument had an obvious effect on the shaping ability of the system. Keywords: Cross-sectional design, Shaping ability, Nickle Titanium rotary files (One Curve, 2Shape, K3-i File, E3 Azure, Neolix).

Shaping ability of three instrumentation system in moderately curved canals: A micro-CT study.

This study aims to compare the shaping ability of three systems using micro-computed tomography (micro-CT). Moderately-curved mesial canals of 36 mandibular molars were assigned to three groups (n = 24); Protaper Next (PTN, 0.25, 0.06), WaveOne Gold (WOG, 0.25, 0.07), TruNatomy (TRN, 0.25, 0.04), and instrumentation was performed. Pre- and post-micro-CT scans were obtained. Canal volume and surface, structure model index (SMI), centroid shift, canal transportation, and untouched canal were analyzed. One-way ANOVA and Student's t-test were used for statistics. There was no difference in SMI, centroid shift, and centering ability between the study groups (p > .05). Removed dentin and canal surface changes were lower in TRN, while untouched dentin walls were higher (p < .05). Cross-sections became more rounded (p < .05), but not significant between groups (p > .05). Considering the removed dentin by TRN, it can be used in critical dentin thickness, such as the danger zone (DZ). PTN, WOG, and WOG kept the original canal course similarly. Untouched dentin by TRN (41%) was wider than PTN and WOG, consequently, meticulous irrigation is recommended. TRN, which provides a controlled increase in canal volume, can be used in thin dentin such as the DZ, however, its use should be supported by copious irrigation and brushing considering the rate of untouched dentin walls. RESEARCH HIGHLIGHTS: TRN presented a higher untouched dentin wall compared to PTN and WOG. Canal volume and surface changes were the lowest in the TRN group. The centering abilities were similar in PTN, WOG, and TRN.

The Efficiency of Erbium Lasers in the Removal of Root Canal System and Surface Biofilms: A Systematic Review and Meta-Analysis.

Background: Studies have shown positive effects of erbium lasers in removal of biofilms. A review article was required with quantitative data for confirmation of their effects, but there is still no a comprehensive study reviewing their effects based on the root canal and implant surface. This systematic review and meta-analysis was conducted to evaluate the efficiency of erbium lasers in removal of the root canal system and surface biofilms. Methods: Studies were searched with keywords in databases of PubMed, Scopus, Europe PMC, Cochrane Central, Embase, and Web of Science and screened by referees. Data were included based on mean ± standard deviation and size of control and laser groups. Effect sizes were assessed as standardized mean differences and calculated for each study and for the root and dental surface. Laser characteristics and bacteria were considered as moderators. Results: Nineteen articles in the current study comprised 565 samples (283 control samples and 282 laser samples). The analyses showed the significant effects of erbium lasers on bacterial biofilms on the implant surface [-0.496, 95% confidence interval, CI (-0.720 to -0.273); I2 = 26.94; p = 0.029; Q = 13.28] and root canal [-0.551, 95% CI (-0.656 to -0.445); I2 = 23.89; p = 0.031; Q = 10.46]. Results showed that highest efficiency lasers were obtained at higher wavelengths of 2940 nm, 75-100 mJ energy, and 100-150 μsec and <50-Hz pulses. Conclusions: Erbium lasers can be used to remove biofilms on dental implant surfaces and root canal systems and are safe options for untouchable sites in the root canal.

Micro-computed tomographic evaluation of the shaping ability of three nickel-titanium rotary systems in the middle mesial canal of mandibular first molars: an ex vivo study based on 3D printed tooth replicas

BackgroundThe preparation of the middle mesial (MM) canal of mandibular molars represents a challenge because it is often curved, narrow, and close to the root concave. The purpose of this study was to evaluate the ex vivo shaping ability of 3 nickel-titanium (NiTi) rotary systems in the MM canal using 3D printed resin tooth replicas.MethodsA permanent mandibular first molar with a MM canal was acquired from a pool of extracted teeth and reproduced by a 3D printer. The resin tooth replicas (n = 18) were equally assigned to 3 groups for the evaluation of the shaping abilities of 3 NiTi rotary systems (OneShape [OS], Twisted Files [TF], and ProTaper Gold [PTG]) according to the manufacturer’s recommendations. The tooth replicas were scanned by micro-computed tomography (micro-CT) twice before and after instrumentation of the mesiobuccal (MB), mesiolingual (ML), and MM root canals. After 3D reconstruction, the canal straightening, change of root canal volume and surface area, the mesial and distal canal wall thickness and canal transportation at the levels of 1, 2, and 3 mm below furcation were assessed. One-way variance analysis and Turkey’s post hoc test were used for comparisons of the means among different groups, and paired-t test was used to compare the mesial and distal sides of the mesial roots.ResultsAs compared with OS and TF, the use of PTG in preparation of MM canals resulted in significantly more straightening of canal curvature (p < 0.05), greater post-instrumentation canal volume and surface area, and thinner mesial and distal remaining canal wall thickness at 1, 2 and 3 mm below furcation (all p < 0.05). Regarding the root canal transportation in the mesiodistal direction, there was no significant difference among the 3 instruments (all p > 0.05) after the preparation of the MB and ML canals. However, in the MM canal, more pronounced transportation was detected in the PTG group at 2 mm below furcation, and in the TF group at 3 mm below furcation as compared with the other 2 systems (both p < 0.05).Conclusions3D printed tooth replicas have the advantages of consistency and can be an ideal model to evaluate the shaping ability of different instruments in the MM canal. OS and TF files performed similarly and both are appropriate for shaping the MM canal, while PTG may cause excessive and uneven resin removal, especially near the furcation, and may lead to root fragility and procedural errors.

Photodynamic therapy with HiPorfin for cervical squamous intraepithelial lesion at childbearing age

ObjectiveTo evaluate the clinical efficacy and safety of HiPorfin® photodynamic therapy (PDT) in the treatment of young women at reproductive age with high-grade squamous intraepithelial lesion (HSIL) of the cervix. MethodsProspective study of 41 patients aged 28.8 ± 4.6 years old with cervical intraepithelial neoplasia (CIN) Ⅱ-Ⅲ at Peking University Shenzhen Hospital from March 2019 to January 2023. HiPorfin® (2 mg/kg) was infused intravenously, and 48–72 h later, 630-nm laser irradiation was performed in cervical canal and cervical surface with an irradiation dose of 100–120 J/cm2 and 150 J/cm2 respectively. ResultsAll 41 patients with no recurrence had been observed at least 12 months follow-up period after PDT. The number of nulliparous women was 30 (30/41, 73.2 %). CIN Ⅱ were 22 cases (22/41,53.7 %) and CIN Ⅲ were 19 cases (19/41,46.3 %). Complete response (CR) was in 95.5 % (21/22) patients with CIN Ⅱ and 78.9 % (15/19) patients with CIN Ⅲ at 6 months follow-up. Meanwhile, CR rate was 100.0 % (22/22) and 84.2 % (16/19) in CIN Ⅱ and CIN Ⅲ group respectively at 12 months. Pre-treatment, all patients (41/41,100 %) were Human papilloma virus (HPV) positive. HPV eradication rate was 63.4 % (26/41), 73.2 % (30/41) and 92.7 % (38/41) at 3, 6 and 12 months after PDT respectively. Before treatment, cytology ≥ atypical squamous cells of undetermined significance (ASCUS) was 78.0 % (32/41). Negative conversion ratio of cytology was 75.0 % (24/32), 90.6 % (29/32) and 100.0 % (32/32) at 3, 6 and 12 months after PDT respectively. There were no serious adverse effects in patients during and after PDT. ConclusionHiPorfin-PDT is a promising and organ-saving approach for cervical HSIL, which also eradicates HPV infection effectively and can be a beacon of hope for the young women with fertility preservation requirement.

Comparing the diagnostic accuracy of MR dacryocystography (MRD) and dacryoscintigraphy (DSG) in NLDO-related acquired epiphora.

This study aimed to compare the diagnostic accuracy of MR dacryocystography (MRD) and dacryoscintigraphy (DSG) in the diagnosis of acquired epiphora related to NLDO. A total of 15 patients with acquired epiphora and suspected NLDO were included in this study. All patients underwent MRD and DSG examinations. MRD was performed using a 3-Tesla magnetic resonance imaging (MRI) scanner, while DSG involved injection of a radiotracer into the lacrimal drainage system followed by DSG. The results of both imaging methods were compared with the reference standard that was a combination of clinical examination findings and surgical exploration. The results of this study showed that no abnormal findings were observed in MR-DCG in patients before the Valsalva maneuver. However, after the Valsalva maneuver, stenosis/obstruction at the canal surface was observed in all 15 patients diagnosed by DSG, giving a sensitivity of 100% for canal stenosis. Moreover, the results revealed that among these 15 patients, 9 showed stenosis or simultaneous obstruction at the level of the canal and lacrimal sac, but MR-DCG showed these lesions in only 9 patients, giving a sensitivity of 60%. The specificity of MRD and DSG were 85% and 76.7%, respectively. There was a statistically significant difference in the sensitivity of MRD and DSG (p < 0.05). This study demonstrated that MRD has a higher diagnostic accuracy in the diagnosis of acquired epiphora associated with NLDO compared to DSG. MRD showed significantly higher sensitivity and specificity than DSG. Therefore, MRD can be considered as the preferred imaging modality in the diagnosis of acquired epiphora due to NLDO. By accurately identifying the underlying cause of NLDO, MRD can help determine the most appropriate treatment approach for patients and lead to better outcomes.

Tubular Surfaces According to a Focal Curve in E^3

A spine curve moves through the middle of a canal or a tubular surface. It might be asked whether it is possible to carry a spine curve over a tubular surface. For a tubular surface, we have seen that it can be done. In this study, we have given the general equations of a canal surface and a tubular surface according to a focal curve. In this case, we found the fundamental curvatures of a tubular surface. We gave theorems and proofs about the focal curve being a special curve.

Assessment of spatial and temporal seepage losses in large canal systems under current and future water-saving conditions: A case study in the Hetao Irrigation District, China

Accurate estimation of seepage losses in large-scale canal systems and identification of their impact factors are important for improving water conveyance efficiency in agricultural districts. However, seepage losses can vary widely across different regions and periods, making it difficult to obtain a complete understanding of the variation process based solely on local scale studies. In addition, although there are currently some complex numerical models available for large-canal systems in agricultural districts, they are rarely used in practice due to their complexity. This study evaluated the regional-scale spatio-temporal seepage processes of the Zaohuo canal, a 55 km’s sub-main earthen canal located in the Hetao Irrigation District, China, under current and future water-saving conditions using MODFLOW-SWR. In addition, a pre-processing tool was developed to process spatial geographic data and spatial topology between different canals. Furthermore, the sensitivity of different influencing factors, such as the permeability of canal bed sediments, surface and groundwater level, and local lining, was also investigated. The optimal relationship between lining areas when partial lining is used and seepage losses was also investigated. The calculated water conveyance efficiency coefficient is 0.7871, which fits well with the reported results and proves the reliability of the simulation. In addition, it was found that seepage losses are most sensitive to the surface water level of the canal, followed by the permeability of canal bed sediments and then the groundwater level. Moreover, new hybrid lining can reduce the seepage losses by about 92.02%, but ongoing maintenance is vital. When lining the key portion of the canal, the seepage losses will be significantly reduced with the increase of lining area. The seepage losses reduction factor increases by 5.8% for every 1 × 105 m2 increase in lining area when the lining area is below 1 × 106 m2, while the effect is not significant when that limitation is exceeded. This study can support decision-making for water-saving projects in large water conveyance canals in regional-scale agriculture districts.

Canal surfaces generated by special curves and quaternions

Canal surfaces generated by special curves and quaternions

Smear Layer Removal Efficacy of EDTA and Citric Acid in Endodontics

Introduction: Smear layer is formed by organic and inorganic components generated during endodontic instrumentation. Smear layer has many deleterious effects on the success of root canal treatment. So removal of smear layer is advocated. Sodium Hypochlorite (NaOCl) and a chelating agent like Ethylene Diamine Tetra Acetic Acid (EDTA) or Citric Acid is commonly used alternatively to remove smear layer. But the alternate use increase dentine erosion in root canal surface. This in vitro study attempts to compare the smear layer removal efficacy of 15% EDTA &amp; 10% Citric Acid as a final rinsing solution. Materials and Methods: Forty extracted, single rooted and single canal human anterior tooth were used. Endodontic preparation of the root canal was done after grouping and access cavity preparation. Final irrigation was given with 15% EDTA &amp; 10% Citric Acid to the test groups and distilled water control groups and kept for one minute. Photomicrograph of the root canal surface at 3000X magnification at coronal, middle and apical regions were taken with the help of SEM and scoring for smear layer removal was done. Data was analyzed using SPSS version 16 and were compared with the control samples and subjected to statistical analysis by one way ANOVA and Bonferroni multiple comparison tests at 5% level of significance. Result: The test solutions removed smear layer but none could be removed completely from all of the three root canal regions. 10% Citric Acid removed smear layer better from the coronal and middle region but in apical region 15% EDTA produced a better result. The difference of smear layer removal efficacy of 15% EDTA &amp; 10% Citric Acid with the Control solution was found statistically significant (p&lt;0.001) but in between 15% EDTA &amp; 10% Citric Acid it was not significant in all three root canal regions. Conclusion: Regarding the smear layer removal efficacy of 10% Citric Acid was found better as a final rinse solution. Update Dent. Coll. j: 2023; 13(2):9-14

Multipopulation evaluation of the internal morphology of mandibular first premolars from different South American countries. A micro-computed tomography study

ObjectiveTo evaluate and compare several anatomical parameters of mandibular first premolars from individuals from different Latin American countries using micro-computed tomography. DesignFive hundred extracted mandibular first premolars from Brazilian, Argentinian, Chilean, Colombian, and Ecuadorian individuals were scanned using micro-computed tomography (n = 100 teeth/country). Root canal configurations were classified according to established parameters. Analyses also included: canal volume and surface area, structure model index, distances from the apical foramen to the root apex or the cementoenamel junction, major/minor apical canal diameters, canal orifice shape, and prevalence of ramifications. ResultsA single root was the most common anatomy in all countries (range, 97%−100%). Vertucci’s type-I canal was the most frequent configuration (range, 36%−66%), followed by C-shaped and type-V canals. The oval-shaped canal orifice was the most predominant in all countries (range, 34%−58%), followed by the circular shape (range, 16%−47%). C-shaped canals occurred in all subpopulations (range, 14%−26%), always associated with radicular grooves. Ranges for canal ramifications were as follows: accessory canals, 36%−73%; lateral canals, 4%−12%; and apical delta, 4%−14% of the teeth. Many anatomic parameters differed significantly between countries (P < .05). ConclusionsVertucci’s types-I and -V, and C-shaped canals were the most prevalent configurations in the subpopulations investigated. Accessory canals and several complex anatomies were found, with some significantly different frequencies between countries.

Deciduous Molars Complexity Anatomy Reveled by Computed Microtomography.

The aim of this study was to analyze the internal morphology of deciduous molars through the use of computed microtomography in a sample from Rio de Janeiro. Thirty maxillary and 30 mandibular deciduous molars (n = 60), divided in first and second primary molars, were scanned by computed microtomography. The teeth were evaluated for root number, root canals, Vertucci classification, root curvature, presence of lateral canals, furcation dentin thickness, structure model index (SMI), volume, and canal surface area. The results showed 100% of maxillary molars had three roots and Vertucci type I canal was more prevalent in this group. In the mandibular ones, type IV was more frequent in the mesial root and class I in the distal root and the cavo-interradicular canal occurred in 2 specimens. Dentin thickness in the furcation region measured 1.53 and 1.59 mm in the maxillary and mandibular, respectively. Volume and area parameters varied according to the evaluated canals and SMI demonstrated that all canals had a cylindrical shape. More detailed information about the internal anatomy of the primary molars has been described, which may help strategies in the preparation of these root canals.

Modeling surface water and groundwater interactions for seepage losses estimation from unlined and lined canals

ABSTRACT This study utilized the Slide2 model to simulate surface water and groundwater interactions and estimate seepage losses from unlined and lined irrigation canals. Firstly, it was validated for an unlined canal passing through an unconfined, homogenous, and isotropic infinitely porous depth. Results revealed that the Slide2 model accurately simulated the seepage flow and estimated the seepage losses with R 2 = 0.99 and MAPE = 3.6%. Accordingly, the Slide2 model runs 54 scenarios to explore the effect of different groundwater table (GWT) locations below the canal berm, canal berm widths, and liner properties, such as liner hydraulic conductivity and thickness on the seepage losses from unlined and lined irrigation canals. The results concluded that when the GWT was above the canal surface water level (CSWL), the seepage losses tended to be lower, ensuing an inflow to the canal bed and inner side slope. Conversely, when the GWT was below the CSWL, the seepage losses tended to be higher, ensuing an outflow to the surrounding unsaturated soil. In contrast, the GWT did not affect seepage losses from lined canals. Also, a wider berm resulted in fewer seepage losses, while the canal berm was less effective for lined canals. In addition, the results proved the lining ability to reduce seepage losses. Thus, the average reduction percentage of the seepage losses for lined canal scenarios was 99.87%. Also, a thick liner could decrease the seepage losses maximally by 48.52%, regardless of the GWT location below the canal berm.