Electronic Band Structure Calculations Research Articles

Dysprosium chromite nanoparticles: A promising photocatalyst for the remediation of ciprofloxacin and methylene blue from wastewater

A facile sol-gel synthesis method was employed to synthesize dysprosium chromite (DyCrO3) nanoparticles (NPs), which were subsequently calcined at 750 ∘C to investigate their structural, optical, and photocatalytic properties. Rietveld refinement of powder X-ray diffraction patterns revealed a single-phase orthorhombic structure for the DyCrO3 NPs, exhibiting good crystallinity and belonging to the Pbnm space group. Furthermore, Field Emission Scanning Electron Microscopy and Transmission Electron Microscopy imaging revealed a promising morphology with an average particle size of 30 ± 7 nm. Optical assessments indicated an energy band gap of 2.72 eV, suggesting potential for solar light harvesting as a photocatalyst. Mott-Schottky plots confirmed the n-type semiconductor behavior of the DyCrO3 NPs, and valence band X-ray photoelectron spectroscopy analysis supported these findings. Electronic band structure calculations showed a substantial conduction band minimum and a positive valence band maximum, essential for promoting oxygen reduction and oxidation reactions, respectively, which are crucial for photocatalytic activity. Moreover, the synthesized DyCrO3 NPs demonstrated significant potential as efficient photocatalysts, effectively decomposing the antibiotic ciprofloxacin (CIP) under solar light. Notably, the DyCrO3 NPs achieved 83 % degradation of CIP within 240 min of solar irradiation. Similarly, under identical conditions, the DyCrO3 NPs photocatalyst showed promise in degrading 70 % of the colored organic pollutant methylene blue (MB). Interestingly, during the first 120 min, the degradation of CIP was approximately 25 % greater than that of MB. The ability of DyCrO3 NPs to efficiently degrade both colored and colorless pollutants highlights the catalyst’s inherent photocatalytic nature, rather than merely relying on dye-sensitization effects. Furthermore, the presence of DyCrO3 NPs reduced the activation energy for CIP degradation from 31.657 kJ mol−1 K−1 to 20.846 kJ mol−1 K−1, providing additional evidence of their true catalytic efficacy. Apparent quantum yield values of 40 % for CIP and 35 % for MB degradation further illustrate their superior solar energy harvesting ability. A comprehensive mechanism was developed to explain the impressive photocatalytic performance of the synthesized NPs, highlighting their potential in degrading pharmaceutical antibiotics.

Novel superhard orthorhombic O12 carbon: a first principle study

Abstract In this study, a new orthorhombic carbon structure with Ama2 symmetry, designated as O12 carbon, has been predicted on basis of the first-principles method. The thermal stability and dynamic stability of O12 carbon were evaluated and confirmed by combining ab initio molecular dynamics and phonon spectra analyses. Meanwhile, the mechanical properties of O12 carbon, compared with other superhard carbon allostrope like diamond, M-carbon, Bct-c4 and Cco-C8, have also been systematically investigated. With a bulk modulus of 351 GPa, a shear modulus of 333 GPa, and a Vickers hardness of 53 GPa, O12 carbon is identified as a superhard material of significantly technological and industrial applications. The existence of elastic anisotropy in O12 carbon has also been confirmed. The electronic band structure calculations have revealed that O12 carbon exhibits a semiconductor characteristic with a direct band gap of 2.5 eV, making it promising candidate in electronic applications. Additionally, the XRD spectra of O12 carbon were obtained to offer further insights for potential experimental observations. Our findings enrich the family of carbon structure and are expected to stimulate additional experimental interest.

Investigating the Optoelectronic Properties of 2‐D and 3‐D CaTi1−xCuxO3 as a Phosphor Materials: A Density Functional Theory Approach

ABSTRACTThe CaTiO3 has been extensively investigated as a highly promising optical material mostly for its optoelectronic properties and its function as a host for transition metals doped in the CaTiO3. Electronic and optical properties of CaTi1−xCuxO3 (2‐D and 3‐D) have been thoroughly analyzed using first‐principles calculations based on Density Functional Theory (DFT). The calculations of these properties in both 2‐D and 3‐D configurations have performed by the use of generalized gradient approximation plus Hubbard (GGA + U). The electronic characteristics including the electronic band structure, partial density of states, and total density of states have been meticulously computed for CaTi1−xCuxO3 in both 2‐D and 3‐D. Upon analyzing the obtained results, we investigated that conduction and valence bands overlapped for both 2‐D and 3‐D structures revealing the metallic nature. We observed transitions mainly attributed to Cu‐d, Ti‐d, Ti‐p, and O‐p orbitals in both 2‐D and 3‐D configurations. Discussion delves into the significance of electronic band structure calculations in understanding optical properties. Peaks in the energy loss function are observed at 13 eV in both cases referred to the plasmon energy. Static values of the dielectric functions, extinction coefficient, reflectivity, and refraction are also computed. Our obtained results showed that the CaTi1−xCuxO3 compound in 3‐D form is more apt for optoelectronic devices and UV‐LED applications.

Evolution of ferromagnetism and electrical resistivity in Sb-doped Cr4PtGa17

We describe the doping effects on a metallic breathing pyrochlore compound, Cr4PtGa17. Upon doping with Sb, i.e., Cr4Pt(Ga1-xSbx)17, it was found that a selective doping on one of the seven Ga sites occurs. With increasing dopant level, the ferromagnetism in the parent compound is gradually suppressed, along with a decrease in fitted Curie-Weiss temperature (from 61 (1) K to −1.8 (1) K) and effective moment (from ∼2.26 μB/f.u. to ∼0.68 μB/f.u.). Low-temperature heat capacity measurements confirm the absence of magnetic ordering above 0.4 K for the three most doped samples. Meanwhile, electrical resistivity measurements display a metal-semiconductor transition with increasing Sb contents, which is attributed to an increase of Fermi energy based on the calculations of electronic band structure and density of states. Moreover, we have speculated that the ferromagnetism in Cr4PtGa17 is governed by itinerant electrons according to our observations. This study of Sb-doping effect on Cr4PtGa17 provides deeper understanding of magnetism of this system and possibilities for future modifications.

Impact of Lattice Strain on the Electronic and Thermoelectric Properties of CoAs3 Skutterudite Material

Using density functional theory (DFT) combined with semi‐classical Boltzmann transport theory, the electronic and thermoelectric properties of binary skutterudite CoAs3 material are investigated up to 30 GPa. Elastic properties calculations confirm the mechanical stability at 0 GPa and under varying hydrostatic pressures, with ductility influenced by pressure. To ensure dynamical stability, the phonon dispersion frequencies are computed at both 0 and 30 GPa. Electronic band structure calculations, using the GGA + TB‐mBJ approximation, indicate that CoAs3 initially exhibits a direct band gap at its equilibrium lattice constant, which shifts to become indirect under increasing pressure. To assess the impact of pressure on the thermoelectric properties of CoAs3, the Seebeck coefficient, thermal conductivities, and figure of merit (ZT) are calculated at pressures of 5, 10, 20, and 30 GPa for various temperatures (300, 600, 900, and 1200 K). These computations provide valuable insights into how varying pressures influence the material's thermoelectric performance. The optimal thermoelectric properties in CoAs3 material are achieved at 5 GPa and 1200 K for n‐doping (20 GPa and 600 K for p‐doping), with an ideal doping concentration of 1.5 × 1021 cm−3 (5.5 × 1018 cm−3). Under these conditions, the material reaches a high figure of merit (ZT) value of 0.52 for n‐doping and 0.49 for p‐doping. These findings underscore CoAs3 as a promising candidate for applications in energy harvesting and optoelectronic systems, showcasing its robust thermoelectric performance under precise pressure and temperature conditions.

Palladium based air-stable 2D penta-material’s heterostructures for water splitting applications

Heterostructures offer superior photocatalytic characteristics over their constituent counterparts due to their charge separation abilities. Here, we conduct a systematic study of a recently synthesized novel family of palladium-based pentagonal air-stable 2D monolayers, PdSe2, PdPSe, and PdPS, and their heterostructures using first-principles calculations for photocatalytic applications. Electronic band structure calculations reveal moderate bandgaps of 2.27 eV for PdSe2, 2.01 eV for PdPSe, and 2.25 eV for PdPS, indicating their suitability for photocatalytic water splitting. Moreover, to spatially separate and reduce the recombination possibility of photoinduced electron-hole pairs, we propose three van der Waals heterostructures: PdPSe/PdSe2, PdPS/PdSe2, PdPS/PdPS, with the corresponding bandgaps of 1.84 eV, 1.64 eV, and 1.65 eV, respectively. Based on work functions and the staggered band alignment of constituting monolayers, all three heterostructures are identified as type-II photocatalysts, which makes them notable photocatalyst. Additionally, band-edge potentials of PdPSe/PdSe2 and PdPS/PdSe2 confirm their suitability for overall water splitting via photocatalysis, whereas PdPS/PdPSe is suitable for oxygen evolution reactions only. The optical absorption spectra show the ability of each system to operate under a wide range of the spectrum, from visible light to high-energy (UV) regions. These characteristics make these systems valuable and attractive for photocatalytic applications.

When van der Waals Met Kagome: A 2D Antimonide with a Vanadium-Kagome Network.

2D materials showcase unconventional properties emerging from quantum confinement effects. In this work, a "soft chemical" route allows for the deintercalation of K+ from the layered antimonide KV6Sb6, resulting in the discovery of a new metastable 2D-Kagome antimonide K0.1(1)V6Sb6 with a van der Waals gap of 3.2 Å. The structure of K0.1(1)V6Sb6 was determined via the synergistic techniques, including X-ray pair distribution function analysis, advanced transmission electron microscopy, and density functional theory calculations. The K0.1(1)V6Sb6 compound crystallizes in the monoclinic space group C2/m (a = 9.57(2) Å, b = 5.502(8) Å, c = 10.23(2) Å, β = 97.6(2)°, Z = 2). The [V6Sb6] layers in K0.1(1)V6Sb6 are retained upon deintercalation and closely resemble the layers in the parent compound, yet deintercalation results in a relative shift of the adjacent [V6Sb6] layers. The magnetic properties of the K0.1(1)V6Sb6 phase in the 2-300 K range are comparable to those of KV6Sb6 and another Kagome antimonide KV3Sb5, consistent with nearly temperature-independent paramagnetism. Electronic band structure calculation suggests a nontrivial band topology with flat bands and opening of band crossing afforded by deintercalation. Transport property measurements reveal a metallic nature for K0.1(1)V6Sb6 and a low thermal conductivity of 0.6 W K-1 m-1 at 300 K. Additionally, ion exchange in KV6Sb6 via a solvothermal route leads to a successful partial exchange of K+ with A+ (A = Na, Rb, and Cs). This study highlights the tunability of the layered structure of the KV6Sb6 compound, providing a rich playground for the realization of new 2D materials.

TH-graphyne: a new porous bidimensional carbon allotrope.

Graphyne and two-dimensional porous carbon-based materials have garnered significant attention due to their interesting structural characteristics and essential properties for new technological applications. Within this scope, this work investigates the structural, thermal, electronic, optical, and mechanical properties of a novel two-dimensional allotrope that combines triangular (T) and hexagonal (H) rings, connected by acetylenic linkages (graphyne-like), thus named TH-graphyne (TH-GY). This study comprehensively characterizes the proposed system's behavior using density functional theory, ab initio molecular dynamics, and classical reactive molecular dynamics simulations. Our results confirm the structural stability of TH-GY. AIMD simulations demonstrate the material's thermal stability at elevated temperatures, while phonon dispersions indicate its dynamical stability. Electronic band structure calculations show that the system is metallic. The analysis of optical properties reveals intense activity in the visible and UV regions, with pronounced anisotropy. A machine learning interatomic potentials model was developed for TH-GY and used to determine the mechanical behavior of the system, which exhibits Young's modulus ranging from 263 to 356 GPa, highlighting its flexibility. Classical reactive MD simulations elucidate the fracture behavior of TH-GY, revealing distinct fracture patterns and mechanical anisotropy.

The Non-Centrosymmetric Borate Hydride Sr4Ba3(BO3)3.83H2.5.

Sr4Ba3(BO3)3.83H2.5, as the second compound to combine borate and hydride ions, has been synthesized by a mechanochemical synthesis route. The structure has been elucidated by synchrotron X-ray and neutron diffraction and determined to crystallize in the non-centrosymmetric space group P63mc (186) with the cell parameters a=10.87762(15) Å and c=6.98061(11) Å. A detailed investigation of the compound by vibrational spectroscopy in combination with Density Functional Theory calculations reveals the disordered nature of the structure and proves the presence of both borate and hydride ions. Electronic band structure calculations predict a large band gap of 7.1 eV. Hydride states are predicted at the topmost valence band, which agrees well with earlier reported heteroanionic hydrides. We hereby were able to successfully apply previously synthetic and analytical schemes to introduce another member of the rare compounds that contain complex oxoanions simultaneously with hydride ions.

Lattice Softening and Band Convergence in GeTe-Based Alloys for High Thermoelectric Performance.

GeTe-based alloys have been studied as promising TE materials in the midtemperature range as a lead-free alternate to PbTe due to their nontoxicity. Our previous study on GeTe1-xIx revealed that I-doping increases lattice anharmonicity and decreases the structural phase transition temperature, consequently enhancing the thermoelectric performance. Our current work elucidates the synergistic interplay between band convergence and lattice softening, resulting in an enhanced thermoelectric performance for Ge1-ySbyTe0.9I0.1 (y = 0.10, 0.12, 0.14, and 0.16). Sb doping in GeTe0.9I0.1 serves a double role: first, it leads to lattice softening, thereby reducing lattice thermal conductivity; second, it promotes a band convergence, thus a higher valley degeneracy. The presence of lattice softening is corroborated by an increase in the internal strain ratio observed in X-ray diffraction patterns. Doping also introduces phonon scattering centers, further diminishing lattice thermal conductivity. Additionally, variations in the electronic band structure are indicated by an increase in density of state effective mass and a decrease in carrier mobility with Sb concentration. Besides, Sb doping optimizes the carrier concentration efficiently. Through a two-band modeling and electronic band structure calculations, the valence band convergence due to Sb doping can be confirmed. Specifically, the energy difference between valence bands progressively narrows upon Sb doping in Ge1-ySbyTe0.9I0.1 (y = 0, 0.02, 0.05, 0.10, 0.12, 0.14, and 0.16). As a culmination of these effects, we have achieved a significant enhancement in zT for Ge1-ySbyTe0.9I0.1 (y = 0.10, 0.12, 0.14, and 0.16) across the entire range of measured temperatures. Notably, the sample with y = 0.12 exhibits the highest zT value of 1.70 at 723 K.

Na2B6Si2: A Prototype Silico-boride with Closo (B6)2- Clusters.

The compound Na2B6Si2 was synthesized under high-pressure, high-temperature conditions at pressures ranging from 6 to 9.5 GPa and temperatures from 1070 to 1270 K before quenching to room temperature followed by slow decompression. The crystal structure was determined from microcrystals using precession-assisted electron diffraction tomography, validated by dynamical refinement and full-profile refinements using optimized coordinates from quantum chemical calculations (space group R3̅m, Pearson symbol hR30, a = 5.0735(1) Å and c = 16.0004(7) Å). The atomic arrangement consists of a unique framework formed by electron-precise octahedral closo (B6)2- clusters connected via ethane-like (Si2)0 dumbbells. The Na+ cations occupy cavities in the hierarchical variation of a Heusler-type framework. The balance (Na+)2([B6]2-)(Si0)2 reveals an electron precise Zintl-Wade phase, which is in line with electronic band structure calculations predicting semiconducting behavior.

Optical response of Zr[formula omitted]CO[formula omitted]/MoS[formula omitted] van der Waals heterostructures calculated using first-principles calculations

In the field of material science, the search for a material with an optimal bandgap of approximately 1.40 eV that can act as an efficient photocatalyst for water splitting using solar spectrum irradiation is a noble mission. In this article, we explore the structural, electronic structure, optical and photocatalytic properties of Zr2CO2/MoS2 vdW heterostructures. Our results demonstrates that the Zr2CO2/MoS2 vdW heterostructure can be reliably synthesized. This is due to a minimal lattice mismatch of less than 3%, a negative adhesion energy of -4.23 meV/Å 2, and inherent dynamic stability. The electronic band structure calculations indicate that the Zr2CO2/MoS2 vdW heterostructure is an indirect bandgap semiconductor. We found that the conduction band minimum (CBM) and valance band maximum (VBM) of the heterostructure are located in different monolayers. Furthermore, under −2% biaxial strain a transition from type-I to type-II (staggered) band alignment occurred. Stacking 2D MoS2 on the Zr2CO2 monolayer results in a vdW heterostructure, and as a result, the HSE calculated bandgap of the Zr2CO2/MoS2 vdW heterostructure in most stable configuration lying in the ideal range for photocatalytic applications. We also studied the heterostructure’s optical properties to understand its response to incident photons with energies up to 14 eV. Based on our findings, Zr2CO2/MoS2 heterostructures are desirable for optoelectronic device applications operated in visible range. Our research offers fresh recommendations for developing novel, highly effective photocatalytic compounds with numerous optical device applications.

Pressure induced structural and electronic band transition in CsPbBr3

Cesium lead bromide (CsPbBr3) is a prominent halide perovskite with extensive optoelectronic applications. In this study, we report the pressure modulation of CsPbBr3’s crystal structure and electronic properties at room temperature up to 5 GPa. We have observed a crystal structure transition from the orthorhombic Pnma space group to a new monoclinic phase in the space group P21/c at 2.08 GPa. The structure is associated with ~8% of density jump across the transition boundary. DFT calculations have suggested that the structure transition leads to a change in the electronic band structure, and there is an emergent indirect bandgap at the Pnma-P21/c phase transition boundary at 2.08 GPa. Across the transition boundary, the electronic band gap of CsPbBr3 increased from 2.07 eV to 2.38 eV, which explains its pressure-induced color change. Our study demonstrates the importance of using in-situ crystal structure in the electronic band structure calculations in halide perovskites.

DFT study of the crystal structure, elastic and electronic properties of the phases: Ti2InC(1-x)Nx superconductor

A systematic study was conducted to investigate the effect of substituting C by N on the crystal structure and elastic electronic properties in the Ti2InC(1-x)Nx phases using the DFT framework implemented in the CASTEP code. Initially, the crystalline structure was stabilized by geometric optimization of the Ti2InC(1-x)Nx phases. The structural properties showed that the lattice parameters a and c and, consequently, the volume decreased because of the difference between the ionic radius of C and N. According to Born's structural stability criterion, the phases with a hexagonal structure are stable for all the ranges of N content studied. Analysis of mechanical moduli shows an increase between 0.00 < x < 0.25 and a decrease for x > 0.50 in Young's modulus. At the same time, the Pugh and Poisson ratios show the phases are brittle between 0.00 < x < 0.75, ductile for x = 1.00, and all metallic, respectively. Electronic band structure calculations confirm this metallic behavior, supported by the DOS analysis. Finally, as expected, the PDOS shows an increase in the electronic states of the 2p-C (N) orbitals because of the substitution of C for N. Consequently, the density of states at the Fermi level N(EF = 0) increases as the N content rises. Finally, using the Frolich model, we observe an increase in Tc as the N content increases; as a result, the electron-phonon coupling constant values increase from 0.51 to 0.62; these values imply the phases are moderately coupled superconductors.

Interplay between Structural, Electronic, and Magnetic Properties in the p0-d Semi-Heusler Compounds: The Case of Li-Based Compounds

Half-metallic semi-Heusler compounds (also known as half-Heusler compounds) are currently at the forefront of scientific research due to their potential applications in spintronic devices. Unlike other semi-Heuslers, the p0(d0)-d compounds do not appear to crystallize in the typical variant of the C1b structure. We investigate this phenomenon in the p0-d Heusler compounds LiYGa and LiYGe, where Y varies between Ca and Zn, using first-principles ab initio electronic band-structure calculations. We examine the electronic and magnetic properties of these compounds in relation to the three possible C1b structures. Notably, LiVGa, LiVGe, LiMnGa, and LiCrGe are half-metallic ferromagnets across all three variations of the C1b lattice structure. Our findings will serve as a foundation for future experimental studies on these compounds.

Engineering of interfacial electric field by g-C3N4/ZnSnO3 heterojunction for excellent photocatalytic applications

The heterojunction of 2D g-C3N4 thin nanosheets and double-shelled ZnSnO3 nanocubes was prepared via a reliable, convenient, and cost-effective technique to achieve efficient photocatalytic activity. The unique double-layered structure of ZnSnO3 helps to absorb more visible light and provides a shorter diffusion path for charge carriers. The integration of some wrapped g-C3N4 nanosheets to the outer layer of ZnSnO3 increases the multiple active sites and specific surface area (SBET) to boost the photocatalytic reaction. The synergistic effect of heterojunction and oxygen vacancies effectively stimulates the generation and spatial charge separation. Furthermore, as-synthesized 2D/3D heterostructure develops an interfacial electric field that plays an efficient role in charge migration and enhances the redox ability of the material. The degradation efficiency for MB (99.5 %, within 30 mins), TC (98.2 %, within 120 mins), H2 production rate (1799 μmol g−1 h−1) and CO evolution rate (23.6 μmol g−1 h−1) confirms the excellent performance of multifunctional photocatalyst. Additionally, DFT calculations of electronic band structure and density of states are in excellent agreement with experimental results. This work highlights the new perspective on designing suitable nanostructures for photocatalytic applications.

A comprehensive first-principles investigation of structural, electronic, vibrational, optical, thermodynamic and thermoelectric properties of LiZnAs

The structural, electronic, vibrational, optical, thermodynamic and thermoelectric properties of Nowotny–Juza filled tetrahedral semiconductor LiZnAs under high pressure is investigated using the plane-wave pseudo-potential approach in the frame work of density functional theory (DFT) within the generalized gradient approximation (GGA). The calculated lattice constant (a0) and bulk modulus (B0) at ambient pressure are consistent with earlier reported experiment and theoretical results. The variation in Lattice constant, Bulk modulus (B0), Young modulus (Y), Shear modulus (G), Elastic anisotropy factor (A), Poission ratio (μ), Paugh (B/G) ratio and Elastic constants with pressure is analyzed and concluded. Electronic band structure calculations reveal that with applied pressure direct band gap increases and the indirect band gap decreases. Thermodynamic properties reveals thermodynamically stability with pressurize conditions. The real and imaginary parts of the Dielectric function (ε), Refractive index (η), Extinction Coefficient (k), Optical Conductivity (s), Electron/Optical Energy Loss Function (L), Absorption Coefficient (α), Reflectivity (R) at different pressure conditions are correspondingly studied. With applied pressure the absorption spectra shows a blue shift which makes LiZnAs as potential candidates for the application of optoelectronic devices in ultraviolet frequency range. The thermoelectric properties like Seebeck coefficient (S), Electrical conductivity (σ), and Electronic thermal conductivity (k) and Power factor (PF) have been studied as a function of temperature and chemical potential. Positive value of calculated Seebeck coefficient with temperatures ensures the p-type semiconducting nature of LiZnAs. Results provides theoretical guidance for future experimental investigations and industrial applications of LiZnAs.

Synthesis and Tuning of Electronic, Optical, and Photoelectrochemical Properties of Copper Metavanadate Alloys via Alkaline Earth Metal Substitution

Unlike the well-studied and technologically advanced Group III-V and Group II-VI compound semiconductor alloys, alloys of ternary metal oxide semiconductors have only recently begun to receive widespread attention. Here, we describe the effect of alkaline earth metal substitution on the optical, electronic, and photoelectrochemical (PEC) properties of copper metavanadate (CuV2O6). As a host, the Cu-V-O compound family presents a versatile framework to develop such composition-property correlations. Alloy compositions of A0.1Cu0.9V2O6 (A = Mg, Ca) photoanodes were synthesized via a time and energy-efficient solution combustion synthesis (SCS) method. The effect of introducing alkaline earth metals (Mg, Ca) on the crystal structure, microstructure, electronic, and optical properties of copper metavanadates was investigated by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), diffuse reflectance spectroscopy (DRS), transmission electron microscopy (TEM), and Raman spectroscopy. The PXRD, TEM, and Raman spectroscopy data demonstrated the polycrystalline powder samples to be mutually soluble, solid solutions of copper and alkaline earth metal metavanadates and not simple mixtures of these compounds. The DRS data showed a systematic decrease in the optical bandgap with Cu incorporation. These trends were corroborated by electronic band structure calculations. Finally, the PEC properties exhibited a strong dependence on the alloy composition, pointing to possible applicability in solar water splitting, heterogeneous photocatalysis, phosphor lighting/displays, and photovoltaic devices.

Meta-GGA study of 2D AlN/BN planer heterostructure and performance enhancement via strain engineering.

The 2D AlN/BN planer heterostructure is a promising wide band gap semiconductor, but systematic studies of its bandgap and optical characteristics under applied strain are scarce. Here, the engineering property of 2D AlN/BN comprising bandgap nature transition and optical absorption capability (from unstrained to strained) have been investigated using density functional theory calculations. The formation energy calculations confirm the stability of the simulated nanoheterostructure. The electronic band structure calculations demonstrate that nanoheterostructure is an indirect bandgap material with a large bandgap of 5.26 eV, which can be modified effectively by applying strain. According to the calculations, the transition from indirect to direct band gap behavior has been observed at +15% biaxial strain with 2.71 eV band gap energy. Meanwhile, calculations for optical absorption and dielectric function reveal that the system has significant absorption peaks in the ultraviolet region which are very sensitive to applied strain. As strain increases, the first absorption peaks are shifted towards a lower energy range from 5.73 eV (Ꜫ= 0 %) to 3.76 eV (Ꜫ = +15%), which features an enhancement of optical absorption for solar and solar-blind regions. Furthermore, we determined that the band edge positions in 2D AlN/BN straddled the water redox potential under strain, indicating its effectiveness as a proficient photocatalyst. These characteristics make 2D AlN/BN planer nanoheterostructure a promising candidate for applications in optoelectronics and photocatalytic water splitting performance. First principles computations based on density functional theory were employed to carry out all the calculations with a self-consistent approach. For solving the Kohn-Sham equations, the first principles dependent full-potential linearized augmented plane wave scheme were adopted. For addressing the exchange-correlation effects, the generalized gradient approximation of PBEsol functional was used. To prevent interaction between the periodic images, we have inserted a vacuum region of 10 Å in the z-direction. Non-negligible weak dispersion corrections in nanoheterostructure were considered by using the DFT-D3 method of Grimme's. The locally modified Becke-Johnson (lmBJ) exchange potential has also been applied to compute electronic and optical properties in this research to obtain more accurate information.

The effects of V doping on the intrinsic properties of SmFe10Co2 alloys: A theoretical investigation

The present study focuses on the intrinsic properties of the SmFe10Co2-xVx (x = 0–2) alloys, which includes the SmFe10Co2 alloy, one of the most promising permanent magnets with the ThMn12 type of structure due to its large saturation magnetization (µ0Ms = 1.78 T), high Curie temperature (Tc = 859 K), and anisotropy field (µ0Ha = 12 T) experimentally obtained. Unfortunately, its low coercivity (<0.4 T) hinders its use in permanent magnet applications. The effect of V-doping on magnetization, magnetocrystalline anisotropy energy, and Curie temperature is investigated by electronic band structure calculations. The spin-polarized fully relativistic Korringa-Kohn-Rostoker (SPR-KKR) band structure method, which employs the coherent potential approximation (CPA) to deal with substitutional disorder, has been used. The Hubbard-U correction to local spin density approximation (LSDA + U) was used to account for the large correlation effects due to the 4f electronic states of Sm. The computed magnetic moments and magnetocrystalline anisotropy energies were compared with existing experimental data to validate the theoretical approach’s reliability. The exchange-coupling parameters from the Heisenberg model were used for obtaining the mean-field estimated Curie temperature. The magnetic anisotropy energy was separated into contributions from transition metals and Sm, and its relationships with the local environment, interatomic distances, and valence electron delocalization were analyzed. The suitability of the hypothetical SmFe10CoV alloy for permanent magnet manufacture was assessed using the calculated anisotropy field, magnetic hardness, and intrinsic magnetic properties.