Calcium Silicate-based Materials Research Articles

Clinical influencing factors of vital pulp therapy on pulpitis permanent teeth with 2 calcium silicate-based materials: A randomized clinical trial.

Compared with traditional root canal therapy (RCT), vital pulp therapy (VPT) is a personalized and minimally invasive method for the treatment of pulpitis caused by dental caries. However, there are still no clear guidelines for VPT because high-quality randomized clinical trials are scarce. This prospective cohort study evaluated the clinical efficacy of VPT with the light-curable calcium silicate-based material TheraCal LC (TH) and bioceramic material iRoot BP Plus (BP) in reversible and irreversible pulpitis permanent teeth with carious exposures. 115 teeth with reversible or irreversible pulpitis caused by deep care were randomly divided into 2 groups. TheraCal LC and iRoot BP Plus were used for the pulp capping. Direct pulp capping (DPC), partial pulpotomy (PP) and full pulpotomy (FP) were performed based on observation of the exposed pulp. Postoperative discomforts were enquired and recorded via follow-up phone calls. Clinical and radiographic evaluations were performed 3, 6, and 12 months postoperatively. The overall clinical success rate in the first year was 90.4% (47/52) in both groups. The TH group required less operating time, showed lower levels of pain, and had shorter pain duration post-operative (P < .001). According to the binary logistic regression model, preoperative pain duration was significantly correlated with the prognosis of VPT (P = .011). VPT with TheraCal LC and iRoot BP Plus in pulpitis permanent carious teeth both achieved good clinical outcomes, and TheraCal LC can be easily operated for clinical use. Preoperative pain duration of the affected tooth might have a significant correlation with the prognosis of VPT.

Antibacterial, biocompatible, and mineralization-inducing properties of calcium silicate-based cements.

Different pulp capping materials have different origins and compositions, require different preparations, and may vary in their bioactive properties. The purpose of this study was to evaluate the antibacterial activity, biocompatibility, and mineralization-inducing potential of calcium silicate-based pulp capping materials. Six contemporary calcium silicate-based cements, ProRoot MTA, MTA Angelus, Biodentine, EndoSequence, NeoMTA 2, and NeoPutty, were evaluated. The antibacterial effects of these materials against Streptococcus mutans UA159 and Enterococcus faecalis ATCC 29212 were determined by the agar diffusion assay and the direct culture test. The biocompatibility and mineralization-inducing potential of these materials in preodontoblastic 17IIA11 cells were evaluated by the MTT assay and by Alizarin Red S staining, respectively. In agar diffusion test, only Biodentine showed distinct antibacterial effects against S. mutans. All the tested materials, however, showed antibacterial effects against S. mutans and E. faecalis in the direct culture test, with Biodentine showing the strongest growth inhibition against both S. mutans and E. faecalis. All the tested materials showed acceptable biocompatibility and mineralization-supporting potential in our experimental conditions. In summary, ProRoot MTA, MTA Angelus, Biodentine, EndoSequence, NeoMTA 2, and NeoPutty demonstrated acceptable invitro antimicrobial, biocompatible, and mineralization-supporting properties.

Bioactivity of Calcium Silicate-Based Endodontic Materials: A Comparative in vitro Evaluation

ABSTRACT Background: Bioactivity refers to the ability of a material to interact with living organisms or biological systems in a way that elicits a specific response. In the context of materials science and medicine, bioactivity is particularly important because it can determine the suitability of material for various applications. Objective: To evaluate and compare different commercially available calcium silicate-based materials regarding: 1. Morphological and elemental analysis at the dentin/material interface. 2. Calcium and silicon release and uptake by adjacent root canal dentine by evaluating the calcium and silicon incorporation depth in adjacent root canal dentin. Materials and Methods: This study examined four calcium silicate-based cements: Biodentine, MTA Angelus, BioAggregate, and MTA Plus. One hundred extracted human teeth with intact apices and no cavities were selected. Root sections measuring 3 mm in length were created at the mid-root level using low-speed diamond discs. Bioactivity was evaluated at 1, 7, 30, and 90 days, respectively. Results: The principal composition of the interfacial dentine layer and incorporation of calcium and silicon into dentine was measured at 1, 7, 30, and 90 days. Statistical analysis was performed by multiple comparisons using post hoc Tukey HSD. Conclusion: All the materials have shown bioactivity, i.e. release of calcium, silicon, and their uptake in the adjacent dentin in the presence of phosphate-buffered saline.

Retreatment Strategies for Cases Containing Calcium Silicate-Based Root Canal Sealers: A Comprehensive Review.

This review explores the field of retreatment strategies for cases filled with calcium silicate-based root canal sealers. Since the introduction of calcium silicate-based materials in dentistry, calcium silicate-based root canal sealers have become popular among dentists because of their biocompatibility, bioactivity, and sealing ability. Therefore, effective retreatment strategies are indispensable. This article aims to identify the challenges associated with the removal of calcium silicate-based sealers themselves and removal of gutta-percha with the sealers during retreatment, evaluate current techniques and materials, and provide future directions for research in this field. Regarding the strategies of removal of root canal sealers, calcium silicate-based sealers are still relatively new materials for clinicians compared with traditional sealers such as epoxy- or eugenol-based sealers. First, no clinically established solvents have been reported. Second, calcium silicate-based sealers are currently utilized by clinicians in either the cold sealer-based technique or the warm vertical condensation technique. Third, the setting process of calcium silicate-based sealers generates byproducts, primarily calcium hydroxide and secondarily hydroxyapatite, that could interact with dentine. Lastly, there is a lack of clinical studies evaluating the efficacy of retreatment protocols for teeth filled with calcium silicate-based sealers. Therefore, it is important to investigate the chemo-mechanical properties of calcium silicate-based sealers themselves and their reactions to solvents and/or mechanical instruments and identify the interfacial properties of calcium silicate-based sealers with respect to dentine and gutta-percha. In addition, researchers in the clinical field need to actively gather and report data on retreatments of teeth filled with calcium silicate-based sealers.

One-year radiographic and clinical performance of bioactive materials in primary molar pulpotomy: A randomized controlled trial

ObjectivesMineral Trioxide Aggregate (MTA) is considered the gold standard material for pulpotomy procedures. However, some drawbacks such as poor handling and long setting time are challenging when it is used as pulpotomy dressing in primary molars in children. Hence, the purpose of this study was to compare the radiographic and clinical performance of a premixed, fast setting bioceramic root repair material (BC RRM-F) with MTA in vital pulpotomy procedures of primary molars, with or without the added seal of a stainless steel crown (SSC). MethodsIn this double blinded, four-arm, parallel group randomized contolled trial (RCT), 64 primary molars were randomly allocated to one of the four treatment groups: MTA (PDTM MTA WHITE)+SSC, MTA+GI (bulk fill glass ionomer with glass hybrid technology GC EQUIA Forte® HT), BC RRM-F+GI and BC RRM-F+SCC. All molars were evaluated clinically and radiographically according to the modified Zurn and Seale criteria at 1, 3, 6, and 12 months follow up. Multivariate cox regression models and Kaplan-Meier curves were used for survival analysis. ResultsThere was no statistically significant difference between the success of both pulp capping materials used. Overall survival analysis showed that using GI instead of SCC as a final restorative material was significantly associated with increased risk of failure. ConclusionsTotalFill® BC RRM™ Fast Set Putty can be used as an alternative to MTA in primary molar pulpotomy. Regardless of the pulp capping material, one year survival of pulpotomized primary molars restored with SSC is higher compared to those restored with GC EQUIA Forte® HT. Clinical SignificanceClinicians’ preference and cost effectiveness may justify the use of either material in primary molar pulpotomy. Parents insisting on tooth-colored restorations for their children's pulpotomized teeth cannot be told that the expectation for success is the same as those restored with SSC, even if calcium silicate-based pulp capping materials are used.

Delayed vs. immediate placement of restorative materials over Biodentine and RetroMTA: a micro-shear bond strength study

BackgroundThe aim of the present study was to investigate the micro-shear bond strength (µSBS) of various restorative materials applied on two different fast-setting calcium silicate-based materials and to evaluate the effect of restoration time on µSBS.MethodsA total of 180 acrylic blocks with a cavity in the center were randomly divided into 2 main groups according to the capping material to be used (Biodentine or RetroMTA). The specimens were also randomly divided into 3 groups according to the restoration time (3 min, 12 min, 24 h). After the specified waiting periods, glass hybrid material (EQUIA Forte HT), resin composite (Filtek Z550) and light-cured calcium silicate material (Theracal LC) were placed on the specimens with tygon tubes. The specimens were kept for 24 h and then subjected to µSBS test. Statistical analysis was performed by 3-way ANOVA followed by Tukey test for pairwise comparisons (α = 0.05).ResultsThere is a statistically significant difference (p < 0.05) between the µSBS values obtained by applying resin composite on RetroMTA after different setting times (24 h > 12 min > 3 min). The µSBS obtained for the Biodentine-resin composite at the end of the 3 min setting time is significantly lower (p < 0.05) than the µSBS values at 12 min and 24 h. For both calcium silicate cements, at the end of all time periods, the µSBS obtained when resin composite was applied at the end was higher than the other materials (p < 0.05).ConclusionsFor Biodentine-resin composite bonding, the manufacturer’s recommendation of 12 min can be considered an appropriate time, whereas for RetroMTA-resin composite bonding, the µSBS increased as the waiting time increased. Regardless of the waiting time, it is recommended to prefer direct composite resin restoration over Biodentine and RetroMTA.

Comparative Evaluation of Shear Bond Strength of Tricalcium Silicate-based Materials to Composite Resin with Two Different Adhesive Systems: An In Vitro Study.

Establishing a strong bond between the pulp capping agent and the restorative material is crucial to the success of the procedure. Without this bond, there is a risk of bacterial infiltration into the pulp, leading to treatment failure. In the past, calcium hydroxide was commonly used for such treatments, but it faced challenges, including poor adhesion to dentin, dissolution over time, and the development of multiple tunnel defects. Mineral trioxide aggregate (MTA), introduced to dentistry in 1993, offered an alternative but came with drawbacks like challenging handling and extended setting times. However, in recent times, several new calcium silicate-based materials have emerged to address MTA's limitations. Two notable examples are Biodentine and MTA Plus. Biodentine, for instance, exhibits excellent sealing ability, while MTA Plus distinguishes itself with a finer particle size compared to traditional MTA. These innovative materials offer promising solutions to enhance the efficacy of pulp capping procedures. Therefore, in this research, we conducted a comparative analysis of the shear bond strength (SBS) between composite resin and three materials-MTA, MTA Plus, and Biodentine. We examined the effects of applying two distinct adhesive systems in order to evaluate their influence on the bond strength. A total of 60 acrylic blocks were evenly distributed into three groups, each containing 20 blocks-group I received Biodentine, group II was assigned MTA, and group III received MTA Plus. The respective test materials were compacted into the holes within the blocks. Following this, the samples were incubated for a period of 72 hours. Subsequently, the samples were divided into two subgroups, each consisting of 10 blocks-the self-etch and the total-etch subgroup. The SBS values were then carefully measured for analysis. The SBS of the Biodentine group demonstrated a significantly higher value when compared to the other groups. It's worth noting that when the self-etch adhesive system was employed, the SBS of all the groups experienced a significant reduction. Biodentine cement proves to be an effective choice for pulp capping procedures, regardless of the specific adhesive system employed. Notably, the total-etch adhesive system consistently yields higher bond strength when compared to the self-etch adhesive system. Kumar V, Showkat I, Manuja N, et al. Comparative Evaluation of Shear Bond Strength of Tricalcium Silicate-based Materials to Composite Resin with Two Different Adhesive Systems: An In Vitro Study. Int J Clin Pediatr Dent 2023;16(S-3):S272-S277.

Dentin Bond Strength of Calcium Silicate-Based Materials: A Systematic Review of In Vitro Studies

Background: Dentin adhesion is a basic aspect to consider in a root canal sealer. Calcium silicate-based cements are materials that have excellent biocompatibility and bioactivity. Bioactivity is closely related to dentin bond strength. One of the tests that is most used to evaluate the adhesive property of a sealing cement is the “push-out bond strength” test, which consists of applying tensile forces to the root to measure the resistance of the bonding of a material to root dentin. Aim: The aim of this systematic review is to perform a qualitative synthesis of available evidence on the adhesion of calcium silicate-based sealers to dentin. Methods: An advanced search of the literature was performed in five databases, limited to in vitro studies on human teeth published in the last 5 years. Results: 42 studies were eligible for the review, and data were collected according to the number of teeth studied, the canal preparation, the irrigant used, the mechanical test used, the root thirds and the type of sealer studied. A qualitative synthesis of the evidence is presented. Conclusions: TotalFill BC sealer and EndoSequence Root Repair Material appear as the calcium silicate-based materials with the highest bond strength to dentin. In addition, using 17% EDTA as a final irrigant increases the bond strength of calcium silicate-based sealers.

Comparison of Shear Bond Strength in Novel Calcium Silicate-Based Materials to Composite Resin

The purpose of this study was to evaluate whether the newly introduced calcium silicate-based materials with fast-setting properties could be appropriately used as basement materials in indirect pulp treatment (IPT). This was performed by quantifying the durability of adhesion between the material and composite resin, measured by the shear bond strength (SBS). Five calcium silicate-based materials, TheraCal LC&lt;sup&gt;®&lt;/sup&gt; (TLC), TheraCal PT&lt;sup&gt;®&lt;/sup&gt; (TPT), TheraBase&lt;sup&gt;®&lt;/sup&gt; (TB), Well-Root™ PT (WPT), and Endocem&lt;sup&gt;®&lt;/sup&gt; MTA (EMTA), as well as two glass ionomer-based materials, Fuji II and Fuji II LC, were included. Specimens containing these materials were manufactured and bonded to composite resin with a universal adhesive applied in self-etch mode. The SBS values and failure modes were recorded, and the mean SBSs of the materials were compared. Both TPT and TB exhibited SBS values that were similar to TLC, while both WPT and EMTA appeared to have statistically lower SBS values. Mixed failure was commonly observed in TLC and TPT, while all WPT and EMTA samples showed cohesive failure. In comparison with TLC and TPT, more samples with cohesive failure were observed in TB, implying that this material forms a stronger bond with composite resin. Together with the ability of TB to chemically bind to dentin due to its 10-methacryloyloxydecyl dihydrogen phosphate component, TB seems to be a promising material for IPT within the limitations of this in vitro study.

The Effect of Calcium Silicate-Based Materials on Tooth Discoloration and Evaluation of Color Change After Bleaching Treatment: A Spectrophotometric Study.

To evaluate tooth discoloration after the use of calcium silicate-based materials and to examine the effect of internal bleaching on tooth discoloration. The specimens were randomly divided into two experimental groups (n = 45) and a control group (n = 6). Cavities were filled with ProRoot MTA (Dentsply) in Group 1 and Biodentine (Septodont) in Group 2. Color measurements were taken with a spectrophotometer before and after the application of materials at 1 week and then at 13, and 6 months. After 6 months, Groups 1 and 2 were divided into three subgroups according to internal bleaching techniques. All color change ratios and lightness differences were calculated using the CIE L*a*b* system. Data were analyzed using repeated ANOVA and the Kruskal-Wallis test (P = .05). There were statistically significant differences between Groups 1 and 2 at all time intervals (P < .05). Group 1 showed more discoloration than Group 2 (P < .05). There were no significant differences between the bleaching agents (P > .05). Additionally, specimens in both groups became lighter than their initial color (P < .05). Teeth treated with ProRoot MTA exhibited darkening at 1 week that increased over time, whereas those treated with Biodentine maintained the lightness for 6 months.

Global survey of endodontic practice and adoption of newer technologies.

To investigate current endodontic practices, adoption of technologies and continuing education attendance within specialist endodontic practice globally and to identify geographic trends. A web-based survey of endodontic association members in Australia, Britain, Canada, Italy, New Zealand and the USA on routine treatment preferences, armamentarium and education attendance was conducted. Chi-squared, independent sample t-tests, Cochran's Q test and McNemar's test were performed. The survey was completed by 543 endodontists or endodontic post-graduate students. Almost all respondents used the dental operating microscope (DOM, 91.3%), engine-driven nickel-titanium instruments (NiTi, 97.6%), electronic apex locators (EAL, 93.0%), cone-beam computed tomography (CBCT, 91.2%) and calcium silicate-based materials (CSBMs, 93.7%). Dental dam was always used by 99.1%. Over half used irrigation adjuncts (81.8%), warm vertical compaction (74.6%) and heat-treated NiTi (60.2%). Geographic comparison between AP (Asia-Pacific, n = 78), AM (Americas, n = 402) and EM (Europe and Middle East, n = 63) was performed. AM and EM preferred single-visit treatment more (p < .001) and used higher sodium hypochlorite concentrations than AP. AM had more access to CBCT in the workplace (86.6%) than AP (65.4%, p < .001) and used CBCT for routine preoperative assessment (39.6%) more than EM (7.3%, p < .001). Almost all of EM used irrigation adjuncts (95.2%), more than AM (78.1%, p = .001). AP used steroid/antibiotic medicaments most (p < .001) and had the highest attendance at continuing education programmes. Several endodontic-specific armamentaria have reached almost complete adoption within global specialist endodontic practice, whilst the continued uptake of newer technologies should be followed over time. Some practising philosophies varied significantly across different geographic regions.

Comparative biological properties of resin-free and resin-based calcium silicate-based endodontic repair materials on human periodontal ligament stem cells

ObjectivesTo investigate the effect of three different calcium silicate-based materials (CSBM) on the biological behavior of human periodontal ligament stem cells (hPDLSCs).MethodsEluates of Biodentine, NeoPutty and TheraCal PT prepared at 1:1, 1:2, and 1:4 ratios were extracted under sterile conditions. The cytotoxicity of the extracts to the hPDLSCs was assessed using the MTT assay. Scratch wound healing assay was utilized for assessing cell migration. Scanning electron microscopy was used to detect cell attachment and morphology. Calcium ion release was measured using inductively coupled plasma-optical emission spectrometry; the pH-value was evaluated with a pH-meter. ANOVA with post hoc Tukey test was used for statistical analysis.ResultsCell viability was significantly higher for Biodentine and NeoPutty at day 1 with all dilutions (p < 0.05), while at day 3 and day 7 with dilutions 1:2 and 1:4; all materials showed similar behavior (p > 0.05). Biodentine had the highest percentage of cell migration into the scratched area at day 1 for all dilutions (p < 0.05). Stem cells were attached favorably on Biodentine and NeoPutty with evident spreading, and intercellular communications; however, this was not shown for TheraCal PT. Biodentine showed the highest pH values and calcium ion release (p < 0.05).ConclusionsThe resin-free CSBM showed better performance and favorable biological effects on hPDLSCs and were therefore considered promising for usage as endodontic repair materials.Clinical significance: Proper selection of materials with favorable impact on the host stem cells is crucial to ensure outcome in different clinical scenarios.

Evaluation of the Shear Bond Strength of Immediate and Delayed Restorations of Various Calcium Silicate-Based Materials with Fiber-Reinforced Composite Resin Materials.

Due to significant tissue loss in teeth requiring pulp treatments, hermetic restoration of the remaining dental tissues is one of the most crucial factors in determining the treatment's success. The adhesion of composite resins to calcium silicate cements (CSCs) is considered challenging. Consequently, it is crucial to identify the optimal method for obtaining optimal adhesion. The aim of the present study is to evaluate the shear bond strength (SBS) values of immediate and delayed restorations with fiber-reinforced composites on powder-liquid, premixed, and resin-containing flowable CSCs. In the present study, the SBS values obtained after immediate (14 min) and delayed (7 days) restorations of three different CSCs (NeoMTA2, NeoPutty, and TheraCal PT) with three different resin composite materials (EverX FlowTM, EverX PosteriorTM, and Filtek Z550) were compared. The fracture types were evaluated using a stereomicroscope and SEM. TheraCal PT had the highest SBS values for both immediate and delayed restorations, and the comparison with other materials showed a statistically significant difference (p = 0.001). In contrast, there was no statistically significant difference between the SBS values of NeoMTA and NeoPutty (p > 0.05). In both immediate and delayed restorations, there was no statistically significant difference between nanohybrid and fiber-reinforced composites (p > 0.05). The simple use and strong bonding ability of TheraCal PT with composite resins may provide support for the idea that it is suitable for pulpal interventions. Nevertheless, due to the in vitro nature of this study, additional in vitro and clinical studies are required to investigate the material's physical, mechanical, and biological properties for use in clinical applications.

Single-appointment Treatment for Root Perforation in High Esthetic Zone Using Polytetrafluoroethylene and Calcium Silicate-based Material

Single-appointment Treatment for Root Perforation in High Esthetic Zone Using Polytetrafluoroethylene and Calcium Silicate-based Material

Current endodontic practice and use of newer technologies in Australia and New Zealand.

This study investigated endodontic clinical preferences, adoption of newer technologies and information sources among dentists and endodontists. Dental and endodontic society members in Australia and New Zealand were surveyed online regarding their endodontic treatment preferences, armamentarium, information sources and continuing professional education (CPE) attendance. Complete responses were received from 71 endodontic specialists or postgraduates (Group E) and 139 general dentists (Group D). Most of Group E used dental operating microscopes (95.8%), endodontic cone-beam computed tomography (CBCT; 98.6%) and calcium silicate-based materials (CSBMs; 97.2%), significantly more (P < 0.001) than Group D (86.3% used loupes, <32% used CBCT for endodontics or CSBMs). Most respondents used dental dam always for endodontics (94.3%), electronic apex locators (EAL; 81.0%) and engine-driven nickel-titanium (NiTi) instruments (91.4%); Group E had more experience with engine-driven NiTi (P < 0.001). Endodontic CPE attendance was highest at dental association programs (P < 0.001) while hands-on NiTi training attendance was highest via commercial companies (P < 0.05). Online information sources were commonly used (38.8% of Group D, 59.2% of Group E). Dental dam, EAL and engine-driven NiTi were almost universally used. The endodontic group reported high adoption of newer endodontic technologies. Endodontic CPE and information sources should be further surveyed as online engagement evolves. © 2023 Australian Dental Association.

Bismuth release from endodontic materials: in vivo analysis using Wistar rats

Calcium silicate-based materials are used to block the communication between the root canal and the periodontal ligament space. This brings the materials into contact with tissues and the potential for local and systemic elemental release and movement. The aim of the study was to evaluate the elemental release of bismuth from ProRoot MTA in contact with connective tissues after 30 and 180 days as well as any accumulation in peripheral organs using an animal model. Tricalcium silicate and hydroxyapatite containing 20% bismuth oxide (HAp-Bi) were used as controls. The null hypothesis was that bismuth migrates from tricalcium silicate-based materials when associated with silicon. The materials were examined using scanning electron microscopy, energy dispersive spectroscopy (SEM/EDS) and X-ray diffraction prior to implantation as well as using SEM/EDS, micro X-ray fluorescence and Raman spectroscopy after implantation to assess elemental presence in surrounding tissues. Histological analysis was used to evaluate the changes in tissue architecture and inductively coupled plasma mass spectrometry (ICP-MS) was used to investigate the elemental deposition. For the systemic investigation, routine blood analysis was performed and organs were obtained to evaluate the presence of bismuth and silicon using ICP-MS after acid digestion. In the histological analysis of the implantation sites, macrophages and multinucleated giant cells could be observed after 30 days which after 180 days became a chronic infiltrate; although, no major differences were identified in red and white blood cell analyses and biochemical tests. Implantation altered the materials as observed in the Raman analysis and bismuth was detected both locally and within kidney samples after both periods of analysis, indicating the potential for accumulation of bismuth in this organ. Smaller amounts of bismuth than observed in the kidney were also detected in blood, liver and brain for the ProRoot MTA and HAp-Bi after 180 days. Bismuth was released from the ProRoot MTA locally and was detected systemically and in samples without silicon; thus, the null hypothesis was rejected. The bismuth release demonstrated that this element accumulated both locally and systemically, mainly in the kidneys in comparison with brain and liver regardless of the material base.

Clinical applications of calcium silicate-based materials: a narrative review.

Calcium silicate-based materials are hydrophilic materials with biocompatibility and bioactivity properties. Despite many advantages, they might present some problems related to discolouration, setting time, manipulation and solubility depending on the composition of the product and the type of clinical application. Calcium silicate-based materials can be evaluated under two types according to their intended use: calcium silicate-based cements (CSCs) and calcium silicate-based sealers (CSSs). CSCs can be used in many endodontic procedures including perforation repair, resorption repair, apical barriers, guided endodontic repair, vital pulp treatment, endodontic surgery, root fractures and root canal filling as a core obturation material. CSSs are available for use with gutta-percha to obturate root canals using cold and warm techniques, including the sealer-based obturation technique. The purpose of this review is to evaluate the available literature on CSCs and CSSs and to provide up-to-date information and recommendations for their clinical applications.

Factors Affecting the Decision-making of Direct Pulp Capping Procedures among Dental Practitioners: A Multinational Survey from 16 Countries with Meta-analysis

IntroductionDirect pulp capping (DPC) procedures require the placement of a bioactive material over an exposure site without selective pulp tissue removal. This web-based multicentered survey had 3 purposes: (1) to investigate the factors that affect clinicians’ decisions in DPC cases, (2) to determine which method of caries removal is preferred, and (3) to evaluate the preferred capping material for DPC. MethodsThe questionnaire comprised 3 sections. The first part comprised questions regarding demographic features. The second part comprised questions on how treatment plans change according to factors such as nature, location, number and size of the pulp exposure, and patients’ age. The third part composed of questions on the common materials and techniques used in DPC. To estimate the effect size, the risk ratio (RR) and 95% confidence interval (CI) were calculated using a meta-analysis software. ResultsA tendency toward more invasive treatment was observed for the clinical scenario with carious-exposed pulp (RR = 2.86, 95% CI: 2.46, 2.32; P < .001) as opposed to the clinical scenario with 2 pulp exposures (RR = 1.38, 95% CI: 1.24, 1.53; P < .001). Complete caries removal was significantly preferred to selective caries removal (RR = 4.59, 95% CI: 3.70, 5.69; P < .001). Among the capping materials, calcium silicate-based materials were preferred over calcium hydroxide-based materials (RR = 0.58, 95% CI: 0.44, 0.76; P < .05). ConclusionsWhile carious-exposed pulp is the most important factor in clinical decisions regarding DPC, the number of exposures has the least impact. Overall, complete caries removal was preferred over selective caries removal. In addition, the use of calcium silicate-based materials appears to have replaced calcium hydroxide-based materials.

Hydroxyl ion release ability from mixture of Indonesian White Portland Cements - Bi2O3 - Light Cured Methacrylate Based Resin as a Potential Pulp Capping Material

ABSTRACTIntroduction: The bioactivity property of pulp capping materials is determined by the hydroxyl ion release ability, which may alter the environmental pH to become alkaline. Calcium silicate-based materials are antibacterial, able to induce reparative dentin and have a good bacteria-tight seal. The poor handling of calcium silicate-based materials can be overcome by adding resin, so the materials will be easier to handle. Therefore, the purpose of this study was to synthesize a mixture of Indonesian White Portland Cements - Bi2O3 – UDMA and analyzed its hydroxyl ion release ability. Methods: The Indonesian White Portland Cements - Bi2O3 mixture was prepared using the simple solution method and mixed with UDMA. The sample’s ability to release hydroxyl ions was measured using a pH meter and titration test. Results: This study showed that the mixture of Indonesian White Portland Cements - Bi2O3 - UDMA had an initial pH of 11.04 and increased to its peak on 168 hours mark, or on day seven, to pH 11,77 with hydroxyl ion release value of 10-2.23 Conclusion: The mixture of Indonesian White Portland Cements - Bi2O3 -UDMA had an alkaline pH, was able to release hydroxyl ion and had a potential to be used as a pulp capping material.Keywords: The mixture Indonesia White Portland Cements - Bi2O3 – UDMA, Hydroxyl ion, Release Ability

Effectiveness of Two Endodontic Instruments in Calcium Silicate-Based Sealer Retreatment.

The objective of the present in vitro work was to investigate the effectiveness and time required for the removal of calcium silicate-based sealer using two rotary retreatment systems. Sixty extracted, single-canal, lower premolars were used. After obturation using the single-cone technique with calcium silicate-based sealer, samples were divided into four groups according to the technique of desobturation: Group 1 (G1): D-Race; Group 2 (G2): D-Race followed by the use of XP-Endo Finisher R; Group 3 (G3): Protaper Universal Retreatment; and Group 4 (G4): Protaper Universal Retreatment followed by the use of XP-Endo Finisher R. Cone beam computed tomography (CBCT) images were used to calculate the remaining filling materials at the middle and apical thirds. Times required to perform each method were recorded. Scanning electron microscopy (SEM) and digital microscopy were used to evaluate the remaining filling materials. Data were statistically analyzed using the t-test and one way ANOVA on ranks tests. No statistically significant difference was found between G1 and G3 after CBCT observations (p > 0.05). Xp-Endo Finisher R significantly increased the ability to remove materials regardless of the initially used retreatment system (p < 0.05). Statistically significant longer time was found in G3 and G4 compared to G1 and G2, respectively (p < 0.05), to reach the full working length. No retreatment system was able to totally remove the calcium silicate-based sealer from the root canal at the middle and apical thirds (p > 0.05). Digital microscopy demonstrated that the residual materials were the remaining sealers on the canal walls. SEM showed the mineral depositions of calcium silicate materials onto the canal walls and into the dentinal tubules. However, that calcium silicate materials provide mineral deposition into the dentinal tubules might indicate that the traditional irrigants could not be sufficient to remove calcium silicate-based materials from the root canal, and other agents should be used to make retreatment considerably easier.