Calcium Formate Research Articles

Influence of alkali metal formates and calcium formate on workability, hydration and basic properties of reactive powder concrete

AbstractThis work aims to study whether it would be possible to use alkali metal formates and calcium formate in order to increase the workability of reactive powder concrete (RPC) and how these additives affect hydration, mechanical properties and mineralogical composition of RPC. These substances were added together with superplasticizer. Therefore, paper deals with possibility of increase in workability which would be higher when compared to the sole addition of only the superplasticizer themself. The effect of alkali metal formates and their replacement with calcium formate on slump flow, mechanical properties and pH of RPC was studied. Furthermore, the influence of potassium formate and its replacement with calcium formate and with calcium oxide on the hydration of RPC was observed with the help of isothermal calorimetry and thermal analysis. The results showed that the addition of studied compounds allows to achieve an increase in RPC slump flow. However, it is necessary to add these substances in an optimal ratio of alkali metal formate/calcium formate because a higher content of calcium formate leads to a decrease in slump flow. For ideal ratios, the compressive strength after 90 days is still above 218 MPa and the flexural strength is still above 23 MPa. In calorimetric measurements, it was observed that the addition of potassium formate leads to a decrease in the total amount of heat developed in the induction period. According to thermal analysis, additions of the studied additives to RPC caused changes in the content of portlandite and calcite.

Potential Chronological Disturbance of the D’Orbigny Angrite Inferred from Discordant 26Al Ages

Angrites originate from the early-formed differentiated angrite parent body. The pristine volcanic angrite D’Orbigny is devoid of brecciation, shock effects, or any evidence of secondary processes and is thus key for studying the early stages of planetary accretion and differentiation. However, chronometers used to establish the formation chronology of angrites (including D’Orbigny) yield discordant ages, either (i) suggesting that secondary processes could have disturbed the apparent formation ages or (ii) being taken as evidence of heterogeneous distribution of 26Al in the early solar system. Yet spinel is minimally susceptible to secondary parent body processes and therefore a reliable target for establishing precise 26Al–26Mg ages. Here, we present the first in situ 26Al–26Mg analyses of spinel and plagioclase in D’Orbigny. Individual mineral assemblages provide distinct ages: olivine–spinel shows a well-defined isochron with an initial Al ratio ([26Al/27Al]i) of (5.39 ± 0.85) × 10−6, indicating formation at 2.35 +0.25−0.22 Myr after the formation of calcium–aluminum-rich inclusions (CAIs), whereas plagioclase–olivine defines an isochron with [26Al/27Al]i = (7.46 ± 1.87) × 10−7, implying formation at 4.40 +0.44−0.38 Myr after CAIs, consistent with previous MC-ICP-MS studies. This temporal gap can be attributed to secondary processes such as metamorphic or impact-generated diffusion. Thus, D’Orbigny and other angrites do not represent an immaculate anchor for chronometric comparison. This complexity should be considered in future studies, especially when using D’Orbigny as an anchor to discuss the chronology of the early solar system.

Evaluation of Natural Organic Additives as Eco-friendly Inhibitors for Calcium and Magnesium Scale Formation in Water Systems

Evaluation of Natural Organic Additives as Eco-friendly Inhibitors for Calcium and Magnesium Scale Formation in Water Systems

Potential drug-drug interactions and associated factors among hospitalized pediatric patients in Adigrat general hospital, Tigrai, north Ethiopia: a retrospective cross-sectional study

BackgroundDrug-drug interactions (DDIs) are associated with increased or decreased adverse effects and decreased or decreased therapeutic effects. Hospitalized pediatric patients are exposed to a number of potential DDIs (pDDIs). There are limited studies on pDDIs among pediatric patients in Ethiopia. This study was aimed to evaluate the pDDIs and associated factors among hospitalized pediatric patients in Adigrat general hospital, Tigrai, northern Ethiopia.MethodsA retrospective cross-sectional study was carried out among hospitalized pediatric patients in Adigrat general hospital from 01 July 2020 to 31 August 2020. A simple random sampling technique was used to select medical charts. Micromedex 2.0 database was used to screen pDDIs. Data was analyzed using statistical package for social science version 21 and a P-value of ≤ 0.05 was considered statistically significant.ResultsOf the total 146 patients studied, 100 (68.5%) were exposed for at least one pDDI. A total of 158 pDDIs consisting of 33 distinct interacting drug pairs were identified. About 19.3% of the patients had at least one major pDDI, 6.7% at least one moderate and 68.9% at least one minor pDDIs. On the other hand, 63.3% of the total pDDIs were minor and 25.9% major while 3. 8% were contraindicated pDDIs with 15.2% fair and 81.6% good level of documentation. The overall mean duration of pDDIs exposure was about 4.9 (1-23) days. The frequently occurring potential clinical consequences of pDDIs comprised increased risk of QT-interval prolongation (10.1%), theophylline toxicity (5.1%), antiepileptic toxicity (5.1%) and formation of ceftriaxone calcium precipitates (3.8%). Infant/toddler age group (adjusted odds ratio [AOR] = 31.961, 95% CI: 1.117-914.528), number of diseases (AOR = 0.255, 95% CI: 0.069-0.939) and polypharmacy (AOR = 0.276, 95% CI: 0.091-0.838) were associated with pDDIs exposures.ConclusionsA large number of pediatric patients were exposed to a various pDDIs. Age, number of diseases and polypharmacy predicted for the occurrence of pDDIs. Besides, the major severity pDDIs encounted frequently in the current study can potentially lead to a life threatening cardio-vascular toxicicty from QT-interval prolongation. Clinicians should be vigilant to pDDIs to prevent potential clinical consequences of pDDIs. Moreover, computerized drug interaction screening and clincal pharmacy services should be practiced to improve patients’ safety.

Influence of age of fermented Terminalia chebula fruit extract in shell lime: An ancient lime putty production technique adopted in Indian heritage structures

The study examines the influence of fermentation age of 5% w/v extract (K5%) of Terminalia chebula fruit in shell lime, using a 0.75 K5%-to-binder ratio. The carbon dioxide evolution, UV-Spectrometric analysis of K5% followed by Gas chromatography and mass spectroscopy (GC-MS) of the slaked putty variants, identified the predominance of organic acids, fatty acids, and esters. The 90th day physical, mechanical, and durability testing confirmed the lowest water-accessible porosity at 31.07 ±0.11% v/v in K5%-4-90, with capillary porosity trending as K5%-4-90<K5%-7-90<K5%-14-90<R-90<K5%-1-90, affecting compressive strength. Mineralogical and morphological studies confirmed the formation of calcite (CaCO3) polymorphs and calcium oxalates via the oxalate-carbonate pathway. Further, thermogravimetric analysis (TGA) revealed the highest %CaCO3 in K5-4-90 and K5-7-90 samples, linked to carbonation extent. The study specifies that K5% at the 4th and 7th days of fermentation age significantly alters putty characteristics, supporting its widespread application and internal and external finishes in heritage structures.

Multifunctional gallium doped bioactive glasses: a targeted delivery for antineoplastic agents and tissue repair against osteosarcoma

Osteosarcoma (OS) is the mostly commonly occurring primary bone cancer. Despite comprehensive treatment programs including neoadjuvant chemotherapy and tumour resection, survival rates have not improved significantly since the 1970s. Survival rates are dramatically reduced for patients who suffer a local recurrence. Furthermore, primary bone cancer patients are at increased risk of bone fractures. Consequently, there is an urgent need for alternative treatment options. In this paper we report the development of novel gallium doped bioactive glass that selectively kill bone cancer cells whilst simultaneously stimulating new bone growth. Here we show, using a combination of 3-(4.5-dimethylthiazol-2-yl)-2.5-diphenyltetrazolium bromide, LIVE/DEAD assays and image analysis, that bioactive glasses containing gallium oxide are highly toxic and reduce both the proliferation and migration of bone cancer cells (Saos-2) in a dose dependant manner. Glasses containing 5 mol% gallium oxide reduced the viability of OS cells by 99% without being cytotoxic to the non-cancerous normal human osteoblasts (NHOst) control cells. Furthermore, Fourier transform infrared and energy-dispersive x-ray spectroscopy results confirmed the formation of an amorphous calcium phosphate/hydroxyapatite like layer on the surface of the bioactive glass particulates, after 7 d incubating in simulated body fluid, indicating the early stages of bone formation. These materials show significant potential for use in bone cancer applications as part of a multimodal treatment.

Performance optimization design of high ductility concrete rapid repair material incorporating coal gangue aggregate

In order to solve the problem of efficient and effective repair after brittle cracking of concrete on road and bridge deck pavements, and to consider the resource utilization of coal gangue solid waste, the river sand was replaced by coal gangue and a high ductile concrete rapid repair material (HDCRRM) was prepared through performance optimization design. First, the fluidity and compressive strength of materials mixed with different amounts of sulfoaluminate cement (SAC), fly ash, lithium carbonate, calcium hydroxide, calcium formate, sand-binder ratio, water-binder ratio and polycarboxylate superplasticizer were studied, so as to determine the preferred benchmark mix proportion. Then, the replacement rate of coal gangue was optimized to develop HDCRRM. Test results show that the reduction of SAC cement and the increase of fly ash content can weaken the compressive strength of material. The rational design content of lithium carbonate, calcium hydroxide, calcium formate, sand-binder ratio, water-binder ratio and polycarboxylate superplasticizer all can improve the fluidity and compressive strength of the materials within a certain range. When the replacement rate of coal gangue aggregate increases, the tensile elastic modulus and ultimate tensile strength of HDCRRM material decrease, while the ultimate tensile strain increases. When the replacement rate of coal gangue aggregate is 100 %, the compressive strength of HDCRRM is 40.5 MPa, the ultimate tensile strain is 2.83 %, and the average crack width is 50.27μm. The early compressive strength of HDCRRM is mainly provided by a large amount of ettringite and C-S-H gel.

Impact of calcium formate and anhydrous sodium sulfate on the flowability, mechanical properties, and hydration characteristics of UHPC

Ultra-high performance concrete (UHPC) is not an ideal material for rapid repairs of bridge expansion joints due to its slow early strength development. To mitigate this early strength limitation, this study investigated the use of calcium formate (CF) and anhydrous sodium sulfate (SS) as early strength agents to enhance the early strength of UHPC. The findings indicate that a composite addition of 0.25 % SS and 0.25 % CF significantly improves both strength and workability, resulting in a 28-day compressive strength of 141.3 MPa, a 28-day flexural strength of 12.6 MPa, and a flowability of 227 mm. SS facilitates the formation of ettringite (AFt) and calcium hydroxide (C-H), while CF promotes the generation of smaller gismondine particles. This substantial increase in hydration products reduces the porosity of UHPC, thereby densifying the matrix and enhancing its mechanical strength. The synergistic effect of both additives leads to a higher concentration of calcium ions (Ca2+) around the smaller gismondine particles, which generates additional hydration products, optimizes the pore structure of UHPC, and narrows the width of the interfacial transition zone (ITZ). Consequently, this combination significantly improves the early strength of UHPC, achieving a 45.6 % enhancement in the early hydration rate with the use of 0.25 % CF and 0.25 % SS.

Isotopic variation of non-carbonaceous meteorites caused by dust leakage across the Jovian gap in the solar nebula

Abstract High-precision isotopic measurements of meteorites revealed that they are classified into non-carbonaceous (NC) and carbonaceous (CC) meteorites. One plausible scenario for achieving this grouping is the early formation of Jupiter, because massive planets can create gaps that suppress the mixing of dust across the gap in protoplanetary disks. However, the efficiency of this suppression by the gaps depends on dust size and the strength of turbulent diffusion, allowing some fraction of the dust particles to leak across the Jovian gap. In this study, we investigate how isotopic ratios of NC and CC meteorites are varied by the dust leaking across the Jovian gap in the solar nebula. To do this, we constructed a model to simulate the evolution of the dust size distribution and the $^{54}$Cr-isotopic anomaly $\varepsilon ^{54}$Cr in isotopically heterogeneous disks with Jupiter. Assuming that the parent bodies of NC and CC meteorites are formed in two dust-concentrated locations inside and outside Jupiter’s orbit, referred to as the NC reservoir and the CC reservoir, we derive the temporal variation of $\varepsilon ^{54}$Cr at the NC and CC reservoirs. Our results indicate that substantial contamination from CC materials occurs at the NC reservoir in the fiducial run. Nevertheless, the values of $\varepsilon ^{54}$Cr at the NC reservoir and the CC reservoir in the run are still consistent with those of NC and CC meteorites formed around $2\:$Myr after the formation of calcium–aluminum-rich inclusions (Sugiura &amp; Fujiya 2014, Meteorit. Planet. Sci., 49, 772). Moreover, this dust leakage causes a positive correlation between the $\varepsilon ^{54}$Cr value of NC meteorites and the accretion ages of their parent bodies.

Elemental and Structural Characterization of Heterotopic Ossification during Achilles Tendon Healing Provides New Insights on the Formation Process.

Heterotopic ossification (HO) in tendons can lead to increased pain and poor tendon function. Although it is believed to share some characteristics with bone, the structural and elemental compositions of HO deposits have not been fully elucidated. This study utilizes a multimodal and multiscale approach for structural and elemental characterization of HO deposits in healing rat Achilles tendons at 3, 6, 12, 16, and 20 weeks post transection. The microscale tomography and scanning electron microscopy results indicate increased mineral density and Ca/P ratio in the maturing HO deposits (12 and 20 weeks), when compared to the early time points (3 weeks). Visually, the mature HO deposits present microstructures similar to calcaneal bone. Through synchrotron-based X-ray scattering and fluorescence, the hydroxyapatite (HA) crystallites are shorter along the c-axis and become larger in the ab-plane with increasing healing time, while the HA crystal thickness remains within the reference values for bone. At the mineralization boundary, the overlap between high levels of calcium and prominent crystallite formation was outlined by the presence of zinc and iron. In the mature HO deposits, the calcium content was highest, and zinc was more present internally, which could be indicative of HO deposit remodeling. This study emphasizes the structural and elemental similarities between the calcaneal bone and HO deposits.

A Study of the EH36 Surface Sediment Layer under Joint Protection from Seawater Electrolysis Antifouling and Impressed Current Cathode Protection (ICCP) in a Marine Environment

A joint protection device for seawater electrolysis antifouling and ICCP was constructed, and comparative experiments were conducted to study the composition of the EH36 surface deposition layer under joint protection in a marine environment. Surface morphology analysis, energy-dispersive spectroscopy (EDS) imaging analysis, and X-ray diffraction (XRD) composition analysis were performed on the surface deposition layers of the experimental samples. The experimental results showed that under joint protection, a sedimentary layer was rapidly formed on the surface of EH36 to isolate the seawater medium, and this layer was mainly composed of Mg(OH)2 and a small amount of CaCO3. There was no corrosion on the surface of the EH36 substrate. When only ICCP was used, a relatively thin layer of calcium magnesium was deposited on the surface of EH36. Marine fouling organisms adhere to the surface of calcium and magnesium sedimentary layers and the EH36 substrate, and their attachment affects the formation of calcium and magnesium sedimentary layers. Moreover, marine fouling organisms cause corrosion on the surface of the EH36 substrate. The joint protection of seawater electrolysis antifouling and ICCP can simultaneously prevent electrochemical corrosion and marine biological fouling corrosion on the surface of EH36.

Controlling of irreversible fouling and mechanism in a hybrid ceramic membrane bioreactor (CMBR)-reverse osmosis (RO) process for textile wastewater reclamation

In this study, the fouling propensity of a hybrid ceramic membrane bioreactor (CMBR)-reverse osmosis (RO) process was investigated over a prolonged period using real textile wastewater effluent. Additionally, the effectiveness of in-situ ozonation for fouling mitigation was investigated. The results revealed that the CMBR-RO system achieved approximately 99.8 % removal of chemical oxygen demand and 97.4 % removal of total nitrogen. Despite this, soluble extracellular polymeric substances, particularly biopolymers and humics-like substances, remained in the system, resulting in irreversible fouling on the ultrafiltration (UF) membrane. The implementation of in-situ ozonation notably reduced ceramic membrane fouling by enhancing the filterability of larger macromolecules and eliminating inorganic/organic foulants from the membrane surface. Multiple modified fouling indexes were also utilized to evaluate the fouling potential of the RO feed water through size fractionation. It is worth noting that ozonation could pose a potential risk for subsequent RO membrane fouling due to the formation of low molecular weight neutrals, acids, and calcium- or silica- related inorganic-organic complexes. Overall, the integrated CMBR-RO system with in-situ ozonation exhibited excellent performance in producing clean water, achieving nearly 100 % removal of 20 Aromatic Amines. These findings underscore the viability of the CMBR-RO system as a practical and sustainable choice for the reclamation of textile wastewater.

Ammonium nitrogen and phosphorus removal by bacterial-algal symbiotic dynamic sponge bioremediation system in micropolluted water: Operational mechanism and transformation pathways

Construct a bacteria-algae symbiotic dynamic sponge bioremediation system to simultaneously remove multiple pollutants under micro-pollution conditions. The average removal efficiencies of NH4+-N, PO43−-P, total nitrogen (TN), and Ca2+ were 98.35, 78.74, 95.64, and 84.92 %, respectively. Comparative studies with Auxenochlorella sp. sponge and bacterial sponge bioremediation system confirmed that NH4+-N and TN were mainly removed by bacterial heterotrophic nitrification - aerobic denitrification (HN-AD). PO43−-P was removed by algal assimilation and the generation of Ca3(PO4)2 and Ca5(PO4)3OH, and Ca2+ was removed by algal electron transfer formation of precipitates and microbially induced calcium precipitation (MICP) by bacteria. Algae provided an aerobic environment for the bacterial HN-AD process through photosynthesis, while respiration produced CO2 and adsorbed Ca2+ to promote the formation of calcium precipitates. Immobilization of Ca2+ with microalgae via bacterial MICP helped to lift microalgal photoinhibition. The bioremediation system provides theoretical support for research on micropolluted water treatment while increasing phosphorus recovery pathways.

Calcium Carbonate Nanocrystal Growth and Formation on Substrate by Thermal Chemical Vapor Deposition at Different Pre‐Cursor Concentration

Calcium Carbonate Nanocrystal Growth and Formation on Substrate by Thermal Chemical Vapor Deposition at Different Pre‐Cursor Concentration

The Formation of Calcium–Magnesium Carbonate Minerals Induced by Curvibacter sp. HJ-1 under Different Mg/Ca Molar Ratios

The Formation of Calcium–Magnesium Carbonate Minerals Induced by Curvibacter sp. HJ-1 under Different Mg/Ca Molar Ratios

Analysis of Different Early Strength Agents on the Performance of Prefabricated UHPC.

Precast ultra-high-performance concrete (UHPC) has emerged as indispensable in the engineering sector due to its cost-effectiveness and superior performance. Currently, precast UHPC grapples with challenges pertaining to slow setting times and insufficient early strength, largely attributed to its high water-reducing agent content. Effective utilization of early strength agents to augment UHPC's early strength is pivotal in addressing this issue. This study investigates the efficacy of two distinct concrete early strength agents, namely calcium formate (Ca(HCO2)2) and aluminum sulfate (Al2(SO4)3). A UHPC system with a water/cement ratio of 0.17 was used; both single and compound doping experiments were conducted using varied dosages of the aforementioned early strength agents. Our results show that both early strength agents significantly reduce setting time and enhance early strength at appropriate dosages. Specifically, the addition of 0.3% Ca(HCO2)2 led to a 33.07% decrease in setting time for UHPC. Moreover, the incorporation of 0.3% Ca(HCO2)2 and 0.5% Al2(SO4)3 resulted in a strength of 81.9 MPa at 1.5 days, representing a remarkable increase of 118.4%. It is noteworthy that excessive use of Ca(HCO2)2 inhibits the hydration process, whereas an abundance of Al2(SO4)3 diminishes the early strength effect. Simultaneously, this article provides recommendations regarding the dosage of two distinct early strength agents, offering a novel solution for expediting the production of prefabricated UHPC with a low water/cement ratio and high water-reducing agent content.

Novel activation method of waste concrete powder for sustainable clinker-free binder

This study investigates the environmental and mechanical implications of incorporating silica fume into lime-activated thermo-mechanically treated waste concrete powder (TMWCP) to develop a sustainable clinker-free binder. The novel activation method involves thermo-mechanical treatment of WCP, followed by lime and calcium formate chemical activation. The results demonstrated that incorporating silica fume enhanced the pozzolanic reactivity, which led to the formation of C–S–H, pore refinement, and a dramatic increase in compressive strength. For instance, the incorporation of 20 % and 25 % silica fume exhibited compressive strength of 46 MPa and 43 MPa after 28 days of curing. The developed clinker-free binder with the addition of 20 % silica fume demonstrated a reduction in mineral resource consumption of 99.3 % and CO2 emissions of 13 % and 69.3 % compared to the sample without silica fume and ordinary Portland cement, respectively. This study offers a promising avenue for the widespread utilization of WCP as an environmentally friendly clinker-free binder.

Igneous intrusion origin for the petrofabric of Erg Chech 002

AbstractAchondrites provide an opportunity to examine the igneous processes of differentiated bodies in our solar system. The recent discovery of several silica‐rich achondrites suggests that andesitic crusts were more common among planetesimals than previously thought, though the processes behind their emplacement are not well understood. Here, electron backscatter diffraction (EBSD) is used to investigate the igneous emplacement conditions of Erg Chech 002 (EC 002), a recently discovered ungrouped achondrite representing andesitic magmatism ~2 Myr after the formation of calcium–aluminum‐rich inclusions (CAIs). EBSD analyses of crystallographic preferred orientations (CPOs) for augite and plagioclase feldspar phenocrysts indicate that EC 002 exhibits a weak foliation CPO. Augite misorientation inverse pole figures (mIPF) indicate preferential slip along the (100)[001] system with a distinct shift toward the {0kl}[u0w] system in plastically deformed grains. Our findings support the hypothesis that EC 002 was likely emplaced in the lower regions of a magmatic intrusion. Augite slip signatures suggest that EC 002 crystallization and emplacement were restricted to high temperatures (&gt;800°C) and experienced at least two strain regimes. The distinct shift from a dominant (100)[001] slip system, which corresponds to high temperatures (800–1050°C), to a [0kl][u0w] slip system indicates an increased strain rate due to shock deformation (1–5 GPa) attributed to ejection by hypervelocity impact.

On improved microstructure properties of slag-based UHPC incorporating calcium formate and calcium chloride

The study aimed to achieve high strength in slag-based cementless ultra-high performance concrete (UHPC) while investigating the role of calcium formate and calcium chloride as accelerators using advanced characterization and microstructural analysis. The UHPC specimens were evaluated using various techniques, including heat of hydration, thermogravimetric analysis, X-ray diffraction, nuclear magnetic resonance, scanning electron microscopy, and porosity measurements. The results showed that both accelerators improved the UHPC properties, with calcium formate being more effective than calcium chloride, as evidenced by higher heat of hydration, improved microstructure, and lower porosity. Furthermore, the thermodynamic modeling revealed insightful information on the reaction mechanisms with C-(N-)A-S-H and hydrotalcite as the primary hydration products formed in the matrix. Notably, the UHPC specimens with calcium chloride exhibited a very low pH value, which could increase the risk of corrosion in reinforced structures. Therefore, the use of calcium formate as an accelerator can lead to the development of cementless UHPC with superior properties.

200 Effects of zinc oxide removal and different nutritional plans on the growth performance, health, and behavior of nursery pigs from different genetic lines

Abstract This study was conducted to investigate the impacts of the removal of zinc oxide (ZnO) supplemented at pharmaceutical levels and different nutritional plans on the growth performance, health, and behavior of nursery pigs from different genetic sire lines. A total of 1,440 newly weaned barrows and gilts were housed into nursery pens with 30 pigs/pen (0.25m2/pig). Pigs were assigned to eight groups following a randomized complete block design arranged on a 2 x 2 x 2 factorial arrangement [Genetic sire line: PIC 337 or PIC 800; ZnO supplementation: 0 or 2,500 ppm; nutritional plan: Control (PIC recommendation) or Treatment (TRT)]. Pigs were fed in three dietary phases (P1:7 d; P2: 21 d; P3: 21 d). The nutrient levels of the TRT for each phase consisted of reduced crude protein (P1: 21 vs. 18.43%; P2: 20.80 vs. 18.73%), SID Lys (P1: 1.40 vs. 1.20%; P2: 0.35 vs. 1.20%), net energy (P1: 2,450 vs. 2,352 kcal/kg; P2: 2,450 vs. 2,377 kcal/kg) and lactose levels (P1: 15 vs. 7%; P2: 7 vs. 5%), and use of calcium formate instead of calcium carbonate for both P1 and P2, and pigs receiving the same diet in P3. Health and behavior were assessed through ear lesion (weekly during P3) and fecal (weekly during P1 and P2) scoring, mortality/removals, and medication control. Growth performance was assessed by individually weighing pigs and recording feed disappearance every week throughout the experimental period. Data were analyzed using a generalized linear model considering pen as the experimental unit. Models included treatments and their interactions as fixed effects, and block and pen within block as the random terms. Pigs fed ZnO showed greater (P &amp;lt; 0.05) overall average daily gain (ADG; 495 vs. 456 g/d) and average daily feed intake (ADFI; 681 vs. 633 g/d); and decreased (P &amp;lt; 0.05) diarrhea incidence (DI; 3.64 vs 10.21%) at d 14 after weaning and mortality/removals (2.31 vs. 5.11%) compared with pigs fed no ZnO. No significant differences were detected between the nutritional plans for performance traits (P &amp;gt; 0.05); however, pigs fed the TRT had less (P &amp;lt; 0.05) DI (7.54 vs. 11.43%) at d 7 after weaning than pigs fed the control nutrition plan. Regarding the genetic sire lines, PIC 337 pigs showed greater (P &amp;lt; 0.05) overall body weight (26.1 vs. 25.4 kg), ADG (486 vs. 465 g/d) and ADFI (666 vs. 648 g/d); and decreased (P &amp;lt; 0.05) mortality/removals (2.54 vs. 4.66%) and DI (6.92 vs. 12.41%) at d 7 after weaning compared with PIC 800 pigs. In summary, PIC 337 pigs fed ZnO under the control nutritional program showed greater growth performance during the nursery period. This study reaffirmed the benefits of ZnO fed to nursery pigs during the post-weaning period; however, since different countries are banning or reducing the use of ZnO, nutritional strategies should be considered to not negatively impact the health and subsequent performance of nursery pigs.